Search USGS⌕ Search

SEARCH · Search USGS

Results for “River Research and Applications”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,666 recordsLinked to original sources
USGS2026

Software to support remote sensing of river discharge based on critical flow theory

Water resource management requires accurate observations of streamflow but standard field methods for measuring river discharge ( Q ) are costly and can be hazardous for equipment and personnel. Remote sensing has become a viable alternative, but many image-based techniques require field data for calibration and depth and velocity can seldom be mapped with a single sensor. A new approach based on critical flow theory, in contrast, allows both of these attributes to be inferred from readily available image data. This technique only pertains to sites with standing waves, called undular hydraulic jumps (UHJs), but a recent investigation demonstrated its potential to provide accurate discharge estimates. This paper introduces software designed to facilitate Inferring Q from UHJs Identified in River Images (InQUIRI). The package includes modules for retrieving data from image servers, making the measurements of wavelength and width required to calculate discharge, inferring a representative wavelength from a profile digitized along a wave train, combining multiple estimates to obtain an ensemble median discharge, and assessing accuracy via comparison to gage records from the U.S. Geological Survey. By making these steps easier to implement, InQUIRI enables users to apply the workflow to a variety of UHJ-containing images. Accumulating more case studies, some successful and others less so, would help constrain the range of applicability of the critical flow approach and foster development of refined guidelines for selecting and measuring waves. The software described herein could play an important role in promoting informed use of this new technique for non-contact streamflow measurement.

Arizona, Colorado, New Mexico, Utah↗
USGS2026

Assessment of extreme subsurface hydrologic conditions captured during atmospheric river storms in the San Francisco Bay area (California, USA) with applications to shallow landslide early warning

An increase in soil pore water pressure is the typical trigger for the majority of landslides caused by rainfall. Atmospheric river storms, common to the west coast of North America during the winter season, can deliver landslide triggering rainfall resulting in severe impacts to coastal communities. Using a network of hydrologic monitoring stations situated within landslide-prone terrain in the San Francisco Bay area of California (USA), we assess the meteorologic conditions and resulting hydrologic and landslide response resulting from eight consecutive storm events that caused thousands of shallow landslides during the winter of 2022–2023. We find disparate hydrological responses and resultant degrees of observed landsliding ranging from < 1 landslide/km2 to 18 landslides/km2 at the monitoring sites that reflect the interplay and differences between rainfall delivery, subsurface hydrological characteristics, and geotechnical properties at each site. Antecedent soil moisture from both early season rainfall and the first storm in the sequence played a critical role in setting up some hillslopes for failure. Subsequent storms then generated elevated pore water pressures for several hours with associated landsliding. However, we find that the occurrence of widespread landsliding required not only sufficient pore water pressure magnitude in susceptible hillslopes, but also full and prolonged effective soil saturation throughout hillslope profiles. Landslides may still occur at lower values and durations of effective saturation but are likely to be less extensive regionally. We present these findings within the context of research directions and improvements to landslide early warning systems first suggested by researchers 40 years ago.

California↗
USGS2026

The role of groundwater in contributing to surface water salinization in the Upper Colorado River Basin

Freshwater salinization impacts the availability of water for human use and ecosystem needs worldwide. It has been estimated that total dissolved solids (TDS) in the Colorado River Basin cause $350 million/year in damages and substantial resources are devoted to reducing TDS loading to streams. This study describes the development and application of coupled watershed models that enable TDS source tracking through the subsurface and across the landscape at a seasonal timestep for 35 years in the Upper Colorado River Basin. Results indicate that, on average, 75% of TDS loading to streams originates as baseflow, and 50% of loading is lagged in delivery by longer than one season. Snowmelt was identified as a dominant process controlling the transport of lagged TDS to streams. This approach informs when and where TDS mitigation efforts may be effective in a watershed that serves as a critical water supply for the southwestern United States.

Arizona, Colorado, New Mexico, Utah, Wyoming↗
USGS2025

Four-band image mosaic of the Colorado River Corridor downstream of Glen Canyon Dam in Arizona, derived from the May 2021 airborne image acquisition

In May 2021, the U.S. Geological Survey’s Grand Canyon Monitoring and Research Center acquired airborne multispectral high-resolution data for the Colorado River in the Grand Canyon, Arizona. The image data, which consist of four spectral bands (red, band 1; green, band 2; blue, band 3; and near infrared, band 4) with a ground resolution of 20 centimeters, are available as 16-bit unsigned-integer GeoTIFF files in Sankey and others (2024) (available online at https://doi.org/10.5066/P9BBGN6G ). The image files are projected in the State Plane Coordinate System, using the central Arizona zone (202) with the North American Datum of 1983 National Adjustment of 2011. The assessed spatial accuracy for these data is based on 47 ground-control points that were independent from the ground-control points used by the contractor for aerotriangulation and is reported at the 95-percent confidence level as 0.514 meter (m) and a root mean square error of 0.297 m. The intended uses of this dataset are primarily in support of scientific research and monitoring applications. Examples of these applications include high-resolution spatial and temporal change detection of the river channel, geomorphic landforms, riparian vegetation, and backwater and nearshore habitat, as well as other ecosystem-wide mapping. These imagery data also serve as reference material for field science mission planning, as base data for field data collection including community science activities, and as a highly detailed guide for technical boat operation during science activities such as reconnaissance for nighttime missions and navigating rapids during low flows.

Arizona, Nevada, Utah↗
USGS2025

S/P amplitude ratios with Distributed Acoustic Sensing and application to earthquake focal mechanisms

Distributed acoustic sensing (DAS), which transforms a fiber optic cable into an array of high frequency strainmeters, has the potential to help us characterize earthquakes with a dense sampling of measurements. While earthquake focal mechanisms are frequently determined using P -wave polarities and S / P amplitude ratios with inertial seismometers, the dense sampling of DAS over potentially large portions of the focal sphere can aid our solutions. Here, we consider ∼200 regional earthquakes and thousands of S / P measurements on a DAS cable colocated with a network of inertial seismometers near Arcata, California. We demonstrate the S / P ratio measurements made on DAS are similar to those made on the inertial seismometers and can be used to constrain focal mechanism solutions.

California↗
USGS2024

Prioritizing US Geological Survey science on salinization and salinity in candidate and selected priority river basins

The US Geological Survey (USGS) is selecting and prioritizing basins, known as Integrated Water Science basins, for monitoring and intensive study. Previous efforts to aid in this selection process include a scientifically defensible and quantitative assessment of basins facing human-caused water resource challenges (Van Metre et al. in Environmental Monitoring and Assessment , 192(7), 458 2020). In the present work, we explore this ranking process based on water quality considerations, specifically salinity and salinization. We selected top candidate basins to study salinity and salinization issues in 18 hydrologic regions that include 163 candidate basins. Our prioritization is based on quantitative assessment of sources of salinity, drivers of change, and receptors that must respond to those sources and drivers. Source terms represented in the prioritization include geology, depth to brackish groundwater, stream conductivity, chloride in precipitation, urban and agricultural land use, application of road salt as a deicer, and irrigation. Drivers represented in prioritization include changes in chemical weathering as a result of changes in rainwater chemistry. Receptors include measures of water stress, measurements of stream ecological health, and socioeconomic factors. In addition, we present research activities for the USGS on salinity and salinization that can be pursued in these basins including assessment of sources, pathways, and loadings; predicting and understanding changes in sources, peaks, and trends; understanding the components of salinity and mobilization of contaminants; understanding the relationship between salinization and changing ecosystems; and developing knowledge on the causes and distribution of groundwater salinity, brackish water resources, and challenges related to desalination.

Enviornmental Monitoring and Assessment↗
USGS2026

Riverscape heterogeneity shapes population diversity for a migratory fish

Habitat patch dynamics can scale up to influence population demography and diversity with implications for resilience to environmental stochasticity. But how the spatial arrangement and size of habitat patches interact with other components of habitat heterogeneity to shape population diversity at larger spatial scales is not well understood. For riverine fishes, there is increasing evidence that tributary streams provide critical demographic support to main stem rivers. However, the extent to which main stem rivers rely on demographic contributions from tributaries, and the factors underlying this dependence, have not been assessed. Here, we used genetic stock identification to evaluate the effect of tributaries on population diversity of Yellowstone cutthroat trout ( Oncorhynchus virginalis bouvieri ) occupying the main stem Snake River, Wyoming, USA. We found that the main stem relied almost entirely on tributaries for demographic support, but main stem composition varied spatially among river sections. Distance between habitat patches, catchment area, and groundwater availability acted in concert to determine the contribution of specific tributaries to the main stem, but contributions were ultimately modulated by habitat connectivity. We also found evidence for multi-scale spatial structure in tributary contributions, providing insight into untested drivers of main stem river population diversity. Our results demonstrate how spatially discrete and distributed riverscape attributes influence population diversity at broader spatial scales, illustrating how ecosystem resilience emerges from the dynamic, two-way exchange of individuals and energy across habitat networks. Management plans for large rivers that address the ecological contributions of tributaries may be needed to achieve optimal outcomes. Similarly, conservation strategies that exclusively focus on headwater streams may fail to capture the broader habitat requirements necessary to maintain robust cold-water fish populations and associated recreational fisheries, particularly under global environmental change.

Wyoming↗
USGS2024

Reference 1D seismic velocity models for volcano monitoring and imaging: Methods, models, and applications

Seismic velocity models of the crust are an integral part of earthquake monitoring systems at volcanoes. 1D models that vary only in depth are typically used for real‐time hypocenter determination and serve as critical reference models for detailed 3D imaging studies and geomechanical modeling. Such models are usually computed using seismic tomographic methods that rely on P ‐ and S ‐wave arrival‐time picks from numerous earthquakes recorded at receivers around the volcano. Traditional linearized tomographic methods that jointly invert for source locations, velocity structure, and station corrections depend critically on having reasonable starting values for the unknown parameters, are susceptible to local misfit minima and divergence, and often do not provide adequate uncertainty information. These issues are often exacerbated by sparse seismic networks, inadequate distributions of seismicity, and/or poor data quality common at volcanoes. In contrast, modern probabilistic global search methods avoid these issues only at the cost of increased computation time. In this article, we review both approaches and present example applications and comparisons at several volcanoes in the United States, including Mount Hood (Oregon), Mount St. Helens (Washington), the Island of Hawai’i, and Mount Cleveland (Alaska). We provide guidance on the proper usage of these methods as relevant to challenges specific to volcano monitoring and imaging. Finally, we survey‐published 1D P ‐wave velocity models from around the world and use them to derive a generic stratovolcano velocity model, which serves as a useful reference model for comparison and when local velocity information is sparse.

Seismological Research Letters↗
USGS2025

Towards mobile wind measurements using joust configured ultrasonic anemometer for applications in gas flux quantification

Small uncrewed aerial systems (sUASs) can be used to quantify emissions of greenhouse and other gases, providing flexibility in quantifying these emissions from a multitude of sources, including oil and gas infrastructure, volcano plumes, wildfire emissions, and natural sources. However, sUAS-based emission estimates are sensitive to the accuracy of wind speed and direction measurements. In this study, we examined how filtering and correcting sUAS-based wind measurements affects data accuracy by comparing data from a miniature ultrasonic anemometer mounted on a sUAS in a joust configuration to highly accurate wind data taken from a nearby eddy covariance flux tower (aka the Tower). These corrections had a small effect on wind speed error, but reduced wind direction errors from 50° to >120° to 20–30°. A concurrent experiment examining the amount of error due to the sUAS and the Tower not being co-located showed that the impact of this separation was 0.16–0.21 ms &#x2212; 1 "> ms − 1 , a small influence on wind speed errors. Lower wind speed errors were correlated with lower turbulence intensity and higher relative wind speeds. There were also some loose trends in diminished wind direction errors at higher relative wind speeds. Therefore, to improve the quality of sUAS-based wind measurements, our study suggested that flight planning consider optimizing conditions that can lower turbulence intensity and maximize relative wind speeds as well as include post-flight corrections.

Alaska↗
USGS2025

Deterministic physics-based earthquake sequence simulators match empirical ground-motion models and enable extrapolation to data poor regimes: Application to multifault multimechanism ruptures

We use the deterministic earthquake simulator RSQSim to generate complex sequences of ruptures on fault systems used for hazard assessment. We show that the source motions combined with a wave propagation code create surface ground motions that fall within the range of epistemic uncertainties for the Next Generation Attenuation‐West2 set of empirical models. We show the model is well calibrated where there are good data constraints, and has good correspondence in regions with fewer data constraints. We show magnitude, distance, and mechanism dependence all arising naturally from the same underlying friction. The deterministic physics‐based approach provides an opportunity for better understanding the physical origins of ground motions. For example, we find that reduced stress drops in shallow layers relative to constant stress drop with depth lead to peak ground velocities in the near field that better match empirical models. The simulators may also provide better extrapolations into regimes that are poorly empirically constrained by data because physics, rather than surface shaking data parameterizations, is underlying the extrapolations. Having shown the model is credible, we apply it to a problem where observations are lacking. We examine the case of crustal faults above a shallow subduction interface seen to break coseismically in simulations of the New Zealand fault system. These types of events were left out of consideration in the most recent New Zealand national seismic hazard model due to the modeling complexity and lack of observational data to constrain ground‐motion models (GMMs). Here, we show that in the model, by breaking up the coseismic crustal and interface rupturing fault motions into two separate subevents, and then recombining the resulting ground‐motion measures in a square‐root‐of‐sum‐of‐squares incoherent manner, we reproduce well the ground‐motion measures from the full event rupture. This provides a new method for extrapolating GMMs to more complex multifault ruptures.

Seismological Research Letters↗
USGS2026

Comparative assessment of STIC sensors, streamflow and rain gauges for quantifying river connectivity in intermittent systems

In intermittent stream systems, including those occurring in Texas, USA, the severity of low-flow conditions, duration of seasonal disconnection, and frequency of no-flow events have been amplified by drought. Documentation of these no-flow events is necessary to evaluate ecosystem health. However, many intermittent reaches remain un-gauged given that perennial river sec-tions are often prioritized for gauge placement. Our objectives were to 1) document stream flow using Stream Temperature, Intermittency, and Conductivity (STIC) loggers to determine the frequency and duration of no-flow events in intermittent tributaries of the Colorado River, Texas and 2) compare logger data to publicly available data from streamflow discharge and precipitation gauge networks to understand differences among these data types for drying event characterization. We use these comparisons to summarize benefits and limitations of the application of in-stream data loggers. STIC loggers were deployed at 19 sites, one in each pool and riffle habitat of a stream reach. STIC loggers recorded a measurement of relative conductance every six hours from June 2022 to March 2024, which was used to determine the presence or absence of flow connectivity in a reach. No-flow duration among intermittent reaches varied between 37 and 270 days across tributaries during an ongoing drought in the study area. Overall, logger data was more precise than discharge data for characterizing no-flow events or precipitation data when documenting presence of water in the stream channel due to runoff. Lack of discharge gauges in intermittent tributaries left large sections of stream reaches undocumented and resulted in mischaracterization of flow patterns. Drought severity across the tributaries did not follow longitudinal patterns that would be expected by the climatic precipitation gradient of the study area. More research is needed to determine if factors such as population size affect severity. Likewise, precipitation data did not correlate well with logger water presence data, lacking consideration for groundwater recharge, soil hydrophobicity, and surface compaction. This study shows that to monitor no-flow events, detailed spatial datasets are necessary and that STIC loggers are useful tools that provide data to fill spatial information gaps and facilitate more accurate flow characterization and water presence data in intermittent systems.

Texas↗
USGS2025

Fiber-optic sensing for earthquake hazards research, monitoring and early warning

The use of fiber‐optic sensing systems in seismology has exploded in the past decade. Despite an ever‐growing library of ground‐breaking studies, questions remain about the potential of fiber‐optic sensing technologies as tools for advancing if not revolutionizing earthquake‐hazards‐related research, monitoring, and early warning systems. A working group convened to explore these topics; we comprehensively examined the application of fiber optics in various aspects of earthquake hazards, encompassing earthquake source processes, crustal imaging, data archiving, and technological challenges. There is great potential for fiber‐optic systems to advance earthquake monitoring and understanding, but to fully unlock their capabilities requires continued progress in key areas of research and development, including instrument testing and validation, increased dynamic range for applications focused on larger earthquakes, and continued improvement in subsurface and source imaging methods. A key current stumbling block results from the lack of clear data archiving requirements, and we propose an initial strategy that balances data volume requirements with preserving key data for a broad range of future studies. In addition, we demonstrate the potential for fiber‐optic sensing to impact monitoring efforts by documenting the data completeness in a number of long‐term experiments. Finally, we outline the features of a instrument testing facility that would enable progress toward reliable and standardized distributed acoustic sensing data. Overcoming these current obstacles would facilitate progress in fiber‐optic sensing and unlock its potential application to a broad range of earthquake hazard problems.

California, Oregon, Washington↗
USGS2025

The Long Island Sound and Watershed Metadata map application

The Long Island Sound and its watershed encompass an area of about 17,000 square miles and include the Connecticut, Housatonic, and Thames Rivers, which all drain to the sound. Dozens of organizations from government agencies, nonprofits, and Tribal Nations have developed projects and monitoring programs to analyze and protect the water resources of the watershed and sound. The abundance of data and lack of an existing searchable index require a centralized metadata repository to allow users to find water resources data more efficiently. The U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency and the Long Island Sound Study, has created an interactive map application to visualize and search for metadata information across organizations working to monitor and protect the Long Island Sound.

Connecticut, Massachusetts, New Hampshire, New Yor↗
USGS2025

Application of Hydrologic Simulation Program—FORTRAN (HSPF) as part of an integrated hydrologic model for the Salinas Valley, California

The U.S. Geological Survey (USGS), in cooperation with the Monterey County Water Resources Agency, conducted studies to help evaluate the surface-water and groundwater resources of the Salinas Valley study area, consisting of the entire Salinas River watershed and several smaller, adjacent coastal watersheds draining into Monterey Bay. The Salinas Valley study area is a highly productive agricultural region that depends on the coordinated use of surface water and groundwater to meet demand for irrigation and public water supply. To continue to meet these demands, a better understanding of the historical water balance and the effects of water-resource development on the long-term sustainability of water resources in the Salinas Valley study area is needed.

California↗
USGS2025

A method to obtain remotely sensed grain size distributions from nonplanar granular deposits

Constraining the grain size distribution of granular deposits with complex surfaces is difficult with existing approaches. Field and laboratory techniques are time consuming and limited by the maximum grain size that laboratories can accommodate. In this study, we present a new method to identify the coarse fraction of the grain size distribution at a debris-flow fan deposit surveyed with terrestrial laser scanning (TLS) in Glenwood Canyon, Colorado, USA. This method is a novel grain segmentation algorithm developed for application to point cloud data of deposits with complex surfaces and angular grains ranging in size from centimeters to a meter. This approach combines an existing random forest machine learning method with a novel iterative clustering algorithm. We compared the grain size distribution from our algorithm with a Wolman pebble count conducted in the field, and found a root mean squared error of less than 2 cm from the 5th to 95th percentile of the grain size distribution of grains ranging from cobble to boulder sized (6.3–78 cm in our application). Finally, we compared our new algorithm with an existing open-source grain segregation algorithm, and our method outperformed the selected alternative when applied to the debris-flow deposit point cloud.

Colorado↗
USGS2026

Reassessing water availability in the Nile River Basin using satellite-based irrigation water use accounting

Existing estimates of irrigation areas and water use in the Nile River Basin vary widely and are based on inconsistent data and methodologies. This study leverages advances in remote sensing to provide an up-to-date and consistent basin-wide reassessment of water use in the Nile River Basin. Land cover and actual evapotranspiration data from 2013 to 2022 were used to quantify irrigated areas, irrigation water use, and the average naturalized water yield. Across the basin, 7.1 million hectares of irrigated land consume an average of 72.5 ± 2.6 billion cubic meters (BCM) of blue water annually. Egypt and Sudan together account for 92% of the irrigated area and 97% of the irrigation water use. The basin’s average naturalized yield, evaluated at Dongola station, is determined to be between 108 and 114.4 ± 3.2 BCM. Although conservative, this updated analysis indicates the basin’s average naturalized yield is 14%–20% higher than the previous naturalized yield estimate (95 BCM) and 29%–36% higher than the commonly cited observed flow of 84 BCM, which is frequently treated as the total basin-wide available water. Importantly, the study underscores that the 84 BCM represents flow at the Aswan gauging station after upstream consumptive uses, not the total water available in the basin under naturalized conditions. This distinction is critical for accurate water accounting, planning, and governance in this water-scarce basin. This study demonstrates the value of open-source remote sensing resources in data-scarce regions while emphasizing the need for region specific validation and bias correction for improved accuracy.

Nile River Basin↗
USGS2026

Making many out of one: Synthetic geologic deformation model distributions for use in USGS NSHM25‐PRVI Puerto Rico-U.S. Virgin Island update

A key use‐case of geologic slip rates is within deformation models used in probabilistic seismic hazard analyses. Field‐derived geologic slip rates have formed the cornerstone of deformation models in such applications for decades. Recent advancements in seismic hazard analyses have expanded the use of faults for which geologic slip rates are not well constrained using categorical slip rate estimates. Because of these advancements, application of a geologic deformation model for use in 2025 U.S. Geological Survey National Seismic Hazard Model Puerto Rico‐U.S. Virgin Islands (NSHM25‐PRVI) proved challenging due to: (1) a lack of field‐based geologic slip rates, and (2) a lack of epistemic uncertainty distributions within a broad range of estimated slip rates. Preliminary versions of the NSHM25‐PRVI model sampled these slip rate bins in a coincident manner along preferred and extreme value branches, which yielded untenable correlations in mean hazard results. To minimize the influence of correlated uncertainties amid these challenges, we develop a synthetic epistemic uncertainty distribution for deformation rate on each crustal fault. Each fault has a weighting schema across four possible distribution shapes: uniform, normal, triangular favoring local minima, and triangular favoring local maxima. The synthetic distributions are then sampled several times for each logic tree branch. The results provide a more realistic distribution of rates across the study region as compared with using correlated extrema sampling. This exploration of our method in a small region like PRVI can pave the way for larger‐scale, more complicated applications (e.g., western United States).

Puerto Rico, US Virgin Islands↗
USGS2026

Baseflow and snowmelt sustained streamflow in the Upper Colorado River Basin, 1986-2020

The Upper Colorado River Basin (UCRB) faces substantial water availability limitations. Although most streamflow originates as snowmelt, the partitioning of snowmelt between surface runoff and groundwater recharge and subsequent groundwater discharge to streams is highly uncertain. On average, over half of the streamflow in the UCRB is estimated to originate from groundwater discharge to streams, highlighting the importance of baseflow in sustaining surface water. However, the historical patterns of baseflow and streamflow, along with their variability over space and time and their specific sources, remain unknown at the basin scale. This study addresses those gaps by characterizing the sources and transport pathways of both baseflow and streamflow in the UCRB at a seasonal timestep from 1986 to 2020, including the lagged delivery of subsurface water to streams beyond the current season, using coupled models of baseflow and streamflow. Between 1986 and 2020, on average 63% of UCRB streamflow originated from baseflow. About half of this baseflow took longer than one season to reach streams, and outside the snowmelt season, baseflow was the dominant source of streamflow. Snowmelt was a key source of both baseflow and streamflow. Current season snowmelt contributed 33% of streamflow via runoff, and 22% of the 29% of streamflow that originated as current season baseflow via subsurface flow to streams. Over the study period, baseflow index (BFI) declined in headwaters and increased at mid-elevations. Springtime increases in BFI demonstrate the increasingly important role baseflow plays in water supply. Identifying the sources, locations, and timing of water that contributed to the UCRB outlet can inform management of water resources in the basin.

Arizona, Colorado, New Mexico, Utah, Wyoming↗