Search USGS⌕ Search

SEARCH · Search USGS

Results for “Report of Investigation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS1996

Computer input and output files associated with ground-water-flow simulations of the Albuquerque Basin, central New Mexico, 1901-95, with projections to 2020; (supplement three to U.S. Geological Survey Water-resources investigations report 94-4251)

This report presents the computer input files required to run the three-dimensional ground-water-flow model of the Albuquerque Basin, central New Mexico, documented in Kernodle and others (Kernodle, J.M., McAda, D.P., and Thorn, C.R., 1995, Simulation of ground-water flow in the Albuquerque Basin, central New Mexico, 1901-1994, with projections to 2020: U.S. Geological Survey Water-Resources Investigations Report 94-4251, 114 p.) and revised by Kernodle (Kernodle, J.M., 1998, Simulation of ground-water flow in the Albuquerque Basin, 1901-95, with projections to 2020 (supplement two to U.S. Geological Survey Water-Resources Investigations Report 94-4251): U.S. Geological Survey Open-File Report 96-209, 54 p.). Output files resulting from the computer simulations are included for reference.

Open-File Report↗
USGS1989

Bibliography of Water-Resources Investigations reports published by the U.S. Geological Survey from 1971 through 1982

This report contains a cross-referenced listing of 971 Water-Resources Investigations reports (WRIR's) published by the U.S. Geological Survey from 1971 through 1982. The reports are listed by WRIR number. Most requests for WRIR 's generally are by WRIR number; however, the Survey 's annual catalog, ' Publications of the U.S. Geological Survey (year), ' indexes WRIR 's under the National Technical Information Service number, with the WRIR appearing only at the end of the citation within the index. Additionally, a few WRIR 's have been listed in the index without any reference to their WRIR number; and some WRIR 's appeared only in the discontinued Water Resources Investigations folder series. This report lists WRIR 's in sequential order to assist the readership in locating a particular publication. (USGS)

Open-File Report↗
USGS2013

Transient calibration of a groundwater-flow model of Chimacum Creek Basin and vicinity, Jefferson County, Washington: a supplement to Scientific Investigations Report 2013-5160

A steady-state groundwater-flow model described in Scientific Investigations Report 2013-5160, ”Numerical Simulation of the Groundwater-Flow System in Chimacum Creek Basin and Vicinity, Jefferson County, Washington” was developed to evaluate potential future impacts of growth and of water-management strategies on water resources in the Chimacum Creek Basin. This supplement to that report describes the unsuccessful attempt to perform a calibration to transient conditions on the model. The modeled area is about 64 square miles on the Olympic Peninsula in northeastern Jefferson County, Washington. The geologic setting for the model area is that of unconsolidated deposits of glacial and interglacial origin typical of the Puget Sound Lowlands. The hydrogeologic units representing aquifers are Upper Aquifer (UA, roughly corresponding to recessional outwash) and Lower Aquifer (LA, roughly corresponding to advance outwash). Recharge from precipitation is the dominant source of water to the aquifer system; discharge is primarily to marine waters below sea level and to Chimacum Creek and its tributaries. The model is comprised of a grid of 245 columns and 313 rows; cells are a uniform 200 feet per side. There are six model layers, each representing one hydrogeologic unit: (1) Upper Confining unit (UC); (2) Upper Aquifer unit (UA); (3) Middle Confining unit (MC); (4) Lower Aquifer unit (LA); (5) Lower Confining unit (LC); and (6) Bedrock unit (OE). The transient simulation period (October 1994–September 2009) was divided into 180 monthly stress periods to represent temporal variations in recharge, discharge, and storage. An attempt to calibrate the model to transient conditions was unsuccessful due to instabilities stemming from oscillations in groundwater discharge to and recharge from streamflow in Chimacum Creek. The model as calibrated to transient conditions has mean residuals and standard errors of 0.06 ft ±0.45 feet for groundwater levels and 0.48 ± 0.06 cubic feet per second for flows. Although the expected seasonal trends were observed in model results, the typical observed annual variation of groundwater levels of about 2 feet was not. Streamflow at the most downstream observation point was about three times larger than simulated streamflow. Because the transient version of the model proved inherently unstable, it was not used to simulate forecast conditions for alternate hydrologic or anthropogenic changes. Adaptation of alternate stream simulation packages, such as RIV, or newer versions of MODFLOW, such as MODFLOW-NWT, could possibly assist with achieving calibration to transient conditions.

Washington↗
USGS1996

Computer input and output files associated with ground-water-flow simulations of the Albuquerque Basin, central New Mexico, 1901-94, with projections to 2020; (supplement one to U.S. Geological Survey Water-resources investigations report 94-4251)

This report presents the computer input files required to run the three-dimensional ground-water-flow model of the Albuquerque Basin, central New Mexico, documented in Kernodle and others (Kernodle, J.M., McAda, D.P., and Thorn, C.R., 1995, Simulation of ground-water flow in the Albuquerque Basin, central New Mexico, 1901-1994, with projections to 2020: U.S. Geological Survey Water-Resources Investigations Report 94-4251, 114 p.). Output files resulting from the computer simulations are included for reference.

Open-File Report↗
USGS2009

Simulation of streamflow using a multidimensional flow model for white sturgeon habitat, Kootenai River near Bonners Ferry, Idaho – Supplement to Scientific Investigations Report 2005-5230

During 2005, the U.S. Geological Survey (USGS) developed, calibrated, and validated a multidimensional flow model for simulating streamflow in the white sturgeon spawning habitat of the Kootenai River in Idaho. The model was developed as a tool to aid understanding of the physical factors affecting quality and quantity of spawning and rearing habitat used by the endangered white sturgeon (Acipenser transmontanus) and for assessing the feasibility of various habitat-enhancement scenarios to re-establish recruitment of white sturgeon. At the request of the Kootenai Tribe of Idaho, the USGS extended the two-dimensional flow model developed in 2005 into a braided reach upstream of the current white sturgeon spawning reach. Many scientists consider the braided reach a suitable substrate with adequate streamflow velocities for re-establishing recruitment of white sturgeon. The 2005 model was extended upstream to help assess the feasibility of various strategies to encourage white sturgeon to spawn in the reach. At the request of the Idaho Department of Fish and Game, the USGS also extended the two-dimensional flow model several kilometers downstream of the white sturgeon spawning reach. This modified model can quantify the physical characteristics of a reach that white sturgeon pass through as they swim upstream from Kootenay Lake to the spawning reach. The USGS Multi-Dimensional Surface-Water Modeling System was used for the 2005 modeling effort and for this subsequent modeling effort. This report describes the model applications and limitations, presents the results of a few simple simulations, and demonstrates how the model can be used to link physical characteristics of streamflow to the location of white sturgeon spawning events during 1994-2001. Model simulations also were used to report on the length and percentage of longitudinal profiles that met the minimum criteria during May and June 2006 and 2007 as stipulated in the U.S. Fish and Wildlife Biological Opinion.

Idaho↗
USGS2014

Streamflow statistics for development of water rights claims for the Jarbidge Wild and Scenic River, Owyhee Canyonlands Wilderness, Idaho, 2013-14: a supplement to Scientific Investigations Report 2013-5212

The U.S. Geological Survey (USGS), in cooperation with the Bureau of Land Management (BLM), estimated streamflow statistics for stream segments designated “Wild,” “Scenic,” or “Recreational” under the National Wild and Scenic Rivers System in the Owyhee Canyonlands Wilderness in southwestern Idaho. The streamflow statistics were used by the BLM to develop and file a draft, federal reserved water right claim to protect federally designated “outstanding remarkable values” in the Jarbidge River. The BLM determined that the daily mean streamflow equaled or exceeded 20, 50, and 80 percent of the time during bimonthly periods (two periods per month) and the bankfull (66.7-percent annual exceedance probability) streamflow are important thresholds for maintaining outstanding remarkable values. Although streamflow statistics for the Jarbidge River below Jarbidge, Nevada (USGS 13162225) were published previously in 2013 and used for the draft water right claim, the BLM and USGS have since recognized the need to refine streamflow statistics given the approximate 40 river mile distance and intervening tributaries between the original point of estimation (USGS 13162225) and at the mouth of the Jarbidge River, which is the downstream end of the Wild and Scenic River segment. A drainage-area-ratio method was used in 2013 to estimate bimonthly exceedance probability streamflow statistics at the mouth of the Jarbidge River based on available streamgage data on the Jarbidge and East Fork Jarbidge Rivers. The resulting bimonthly streamflow statistics were further adjusted using a scaling factor calculated from a water balance on streamflow statistics calculated for the Bruneau and East Fork Bruneau Rivers and Sheep Creek. The final, adjusted bimonthly exceedance probability and bankfull streamflow statistics compared well with available verification datasets (including discrete streamflow measurements made at the mouth of the Jarbidge River) and are considered the best available estimates for streamflow statistics in the Jarbidge Wild and Scenic River segment.

Idaho↗
USGS2011

Updated one-dimensional hydraulic model of the Kootenai River, Idaho: A supplement to Scientific Investigations Report 2005-5110

The Kootenai Tribe of Idaho, in cooperation with local, State, Federal, and Canadian agency co-managers and scientists, is assessing the feasibility of a Kootenai River habitat restoration project in Boundary County, Idaho. The restoration project is focused on recovery of the endangered Kootenai River white sturgeon (Acipenser transmontanus) population, and simultaneously targets habitat-based recovery of other native river biota. River restoration is a complex undertaking that requires a thorough understanding of the river and floodplain landscape prior to restoration efforts. To assist in evaluating the feasibility of this endeavor, the U.S. Geological Survey developed an updated one-dimensional hydraulic model of the Kootenai River in Idaho between river miles (RMs) 105.6 and 171.9 to characterize the current hydraulic conditions. A previously calibrated model of the study area, based on channel geometry data collected during 2002 and 2003, was the basis for this updated model. New high-resolution bathymetric surveys conducted in the study reach between RMs 138 and 161.4 provided additional detail of channel morphology. A light detection and ranging (LIDAR) survey was flown in the Kootenai River valley in 2005 between RMs 105.6 and 159.5 to characterize the floodplain topography. Six temporary gaging stations installed in 2006-08 between RMs 154.1 and 161.2, combined with five permanent gaging stations in the study reach, provided discharge and water-surface elevations for model calibration and verification. Measured discharges ranging from about 4,800 to 63,000 cubic feet per second (ft 3 /s) were simulated for calibration events, and calibrated water-surface elevations ranged from about 1,745 to 1,820 feet (ft) throughout the extent of the model. Calibration was considered acceptable when the simulated and measured water-surface elevations at gaging stations differed by less than (+/-)0.15 ft. Model verification consisted of simulating 10 additional events with measured discharges ranging from about 4,900 to 52,000 ft 3 /s, and comparing simulated and measured water-surface elevations at gaging stations. Average water-surface-elevation error in the verification simulations was 0.05 ft, with the error ranging from -1.17 to 0.94 ft over the range of events and gaging stations. Additional verification included a graphical comparison of measured average velocities that range from 1.0 to 6.2 feet per second to simulated velocities at four sites within the study reach for measured discharges ranging from about 7,400 to 46,600 ft 3 /s. The availability of high-resolution bathymetric and LIDAR data, along with the additional gaging stations in the study reach, allowed for more detail to be added to the model and a more thorough calibration, sensitivity, and verification analysis to be conducted. Model resolution and performance is most improved between RMs 140 and 160, which includes the 18.3-mile reach of the Kootenai River white sturgeon critical habitat.

Idaho↗
USGS1950

Progress report, investigations of fluvial sediments of the Niobrara River near Cody, Nebraska

Comparison of sediment concentrations at a naturally contracted section on the Niobrara River near Cody, Nebraska, with those measured at the regular gaging station one quarter mile upstream, indicates that approximately 50 percent of the sediment is transported as bed load at the regular gaging station. The bed load percentage varied from 24 to 68 for the 34 determinations available, without significant correlation with water or sediment discharge. The investigation indicates that practically the total sediment load is transported in suspension at the contracted section. The normal sediment load is essentially bed material, averaging about 0.20 millimeters in diameter.

Circular↗
USGS2012

Updates to watershed modeling in the Potholes Reservoir basin, Washington-a supplement to Scientific Investigation Report 2009-5081

A previous collaborative effort between the U.S. Geological Survey and the Bureau of Reclamation resulted in a watershed model for four watersheds that discharge into Potholes Reservoir, Washington. Since the model was constructed, two new meteorological sites have been established that provide more reliable real-time information. The Bureau of Reclamation was interested in incorporating this new information into the existing watershed model developed in 2009, and adding measured snowpack information to update simulated results and to improve forecasts of runoff. This report includes descriptions of procedures to aid a user in making model runs, including a description of the Object User Interface for the watershed model with details on specific keystrokes to generate model runs for the contributing basins. A new real-time, data-gathering computer program automates the creation of the model input files and includes the new meteorological sites. The 2009 watershed model was updated with the new sites and validated by comparing simulated results to measured data. As in the previous study, the updated model (2012 model) does a poor job of simulating individual storms, but a reasonably good job of simulating seasonal runoff volumes. At three streamflow-gaging stations, the January 1 to June 30 retrospective forecasts of runoff volume for years 2010 and 2011 were within 40 percent of the measured runoff volume for five of the six comparisons, ranging from -39.4 to 60.3 percent difference. A procedure for collecting measured snowpack data and using the data in the watershed model for forecast model runs, based on the Ensemble Streamflow Prediction method, is described, with an example that uses 2004 snow-survey data.

Washington↗
USGS1985

Maximum likelihood methods for investigating reporting rates of rings on hunter-shot birds

It is well known that hunters do not report 100% of the rings that they find on shot birds. Reward studies can be used to estimate what this reporting rate is, by comparison of recoveries of rings offering a monetary reward, to ordinary rings. A reward study of American Black Ducks (Anas rubripes) is used to illustrate the design, and to motivate the development of statistical models for estimation and for testing hypotheses of temporal and geographic variation in reporting rates. The method involves indexing the data (recoveries) and parameters (reporting, harvest, and solicitation rates) by geographic and temporal strata. Estimates are obtained under unconstrained (e.g., allowing temporal variability in reporting rates) and constrained (e.g., constant reporting rates) models, and hypotheses are tested by likelihood ratio. A FORTRAN program, available from the author, is used to perform the computations.

Book chapter↗
USGS2019

A Methodology to Assess the National and Regional Impacts of U.S. Wind Energy Development on Birds and Bats

This scientific investigations report describes an effort by the U.S. Geological Survey (USGS) that used research, monitoring data, and modeling to develop a methodology to assess both the current and future population-level consequences of wind energy development on species of birds and bats that are present in the United States during any part of their life cycle. The methodology is currently applicable to birds and bats, focuses primarily on the effects of collisions with turbines, and can be applied to any species that breeds in, migrates through, or otherwise uses any part of the United States. The methodology assesses species at the national and regional scales and identifies those species potentially in need of more detailed study, as well as those species that are likely at low risk from wind energy development. This approach is fundamentally different from existing methods focusing on impacts at individual facilities. This report supersedes USGS Scientific Investigations Report 2015–5066 by the same authors, which described a preliminary version of the methodology. Following reviews of the preliminary methodology by a panel of external experts, public comments, and additional internal review, the methodology was revised and finalized. The three components of the refined methodology described in this new report rely on publicly available fatality information, population estimates, species range maps, turbine location data, biological characteristics of species, and population models. First, three metrics are combined to determine direct and indirect relative effects from wind energy facilities to generate a list of species scores. Second, a generic population model estimates the expected change in population trend caused by the additive mortality from collisions with wind turbines. Third, the methodology combines an estimate of observed fatalities and an estimate of potential biological removal to assess the possibility of a decrease in population size. The latter two components are quantitative. In a test case, the methodology was used to analyze data for six bird species and three bat species. Components of the methodology are based on simplifying assumptions and require information that, for many species, may be sparse or unreliable or may require further study. These assumptions should be carefully considered when using outputs from the methodology. Increases in the quality of data for fatalities from collisions with wind turbines, species distributions, abundance, and demography will likely improve results for uses of the methodology. The methodology’s design identifies and prioritizes a subset of the bird and bat species that may experience population-level impacts from collisions with wind turbines, both currently and from future wind energy development in the United States. Results of an assessment using this methodology could focus future research to improve our understanding of those impacts and to guide avoidance and minimization strategies. In addition, this methodology can be used to identify species for more intensive demographic modeling or to highlight those species that may not require any additional research because effects of wind energy development on their populations are projected to be small. The effects of wind energy facilities on nine unidentified species used in the test case described in this report have not been assessed. Their data were simply used to show the application of the methodology to real-world data and the types of outputs it would produce.

Scientific Investigations Report↗
USGS2007

Landscape geochemistry near mineralized areas of eastern Alaska: Chapter H in Recent U.S. Geological Survey studies in the Tintina Gold Province, Alaska, United States, and Yukon, Canada--results of a 5-year project

The Pogo lode gold deposit was discovered in eastern Alaska in the early 1990s and provided the opportunity to study elemental distribution and mobility in the natural environment prior to mine development. Studying mineralized systems prior to mining allows us to compare the natural biogeochemical signature in mineralized versus nonmineralized areas. The resultant data and interpretation also provide a baseline for evaluating what, if any, changes in elemental distribution result from development. This report investigates the chemistry of stream water, streambed sediment, and soil in the context of regional bedrock geology. The major-ion chemistry of the waters reflects a rock-dominated aqueous system, and the waters are classified as Ca 2+ and Mg 2+ - HCO 3 - to Ca 2+ and Mg 2+ - SO 4 -2 waters. Creeks draining the gneissic lithologies tend to be more sulfate dominated than those draining the intrusive units. Sulfate also dominated creeks draining mineralized areas; however, the underlying paragneiss unit could be contributing substantially to the sulfate concentration, and the sulfate concentration in these creeks may reflect a complex baltholith-paragneiss boundary rather than mineralization. Arsenic concentrations in bed sediments were elevated in mineralized areas relative to nonmineralized areas. Elevated concentrations of nickel, chromium, iron, manganese, and cobalt appear to reflect the presence of ultramafic rocks in the drainage. In general, aqueous metal concentrations were below the State of Alaska’s Aquatic Life Criteria and Drinking Water Standards, with the exception of arsenic in stream water, which ranged in concentration from less than 1 to 14 micrograms per liter (μg/L) and exceeded the drinking water standard at one site. The arsenic and antimony concentration in the A, B, and C soil horizons ranged from 3 to 410 milligrams per kilogram (mg/kg), 6.1 to 440 mg/kg, and 2 to 300 mg/kg, respectively, for arsenic and 0.4 to 24 mg/kg, 0.6 to 25 mg/kg, and 0.2 to 16 mg/kg, respectively, for antimony. The arsenic and antimony concentrations in stream waters correlate well with the concentrations in soils. However, significantly less arsenic and antimony was extracted from C horizon soils in water leaching experiments, indicating that the arsenic and antimony in the C horizon is present in a less available form than in the A or B horizons. Arsenic and antimony uptake by grayleaf willow (Salix glauca L.) appears minimal, with arsenic concentrations ranging from less than 0.01 to 0.14 mg/kg and antimony concentrations ranging from less than 0.003 to 0.23 mg/kg in willow leaves. In general, the highest concentrations of both arsenic and antimony in water and soils were found near mineralized areas. Elevated arsenic concentrations were also found in bed sediments from mineralized areas. In these sample matrices, the presence of arsenic and (or) antimony was a good indicator of contact with mineralized rock units.

Alaska;Yukon↗