Search USGS⌕ Search

SEARCH · Search USGS

Results for “Northeastern Geoscience”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

8 recordsLinked to original sources
USGS2014

Major and trace element geochemistry and background concentrations for soils in Connecticut

Soil samples were collected throughout Connecticut (CT) to determine the relationship of soil chemistry with the underlying geology and to better understand background concentrations of major and trace elements in soils. Soil samples were collected (1) from the upper 5 cm of surficial soil at 100 sites, (2) from the A horizon at 86 of these sites, and (3) from the deeper horizon, typically the C horizon, at 79 of these sites. The <2-millimeter fraction of each sample was analyzed for 44 elements by methods that yield the total or near-total elemental content. Sample sites were characterized by glacial setting, underlying bedrock geology, and soil type. These spatial data were used with element concentrations in the C-horizon to relate geologic factors to soil chemistry. Concentrations of elements in C-horizon soils varied with grain size in surficial glacial materials and with underlying rock types, as determined using nonparametric statistical procedures. Concentrations of most elements in C-horizon soils showed a positive correlation with silt and (or) clay content and were higher in surficial materials mapped as till, thick till, and (or) fines. Element concentrations in C-horizon soils showed significant differences among the underlying geologic provinces and were highest overlying the Grenville Belt and (or) the Grenville Shelf Sequence Provinces in western CT. These rocks consist mainly of carbonates and the relatively high element concentrations in overlying soils likely result from less influence of dilution by quartz compared to other provinces. Element concentrations in C-horizon soils in CT were compared with those in samples from other New England states overlying similar lithologic bedrock types. The upper range of As concentrations in C-horizon soils overlying the New Hampshire-Maine (NH-ME) Sequence in CT was 15 mg/kg, lower than the upper range of 24 mg/kg in C-horizon soils overlying the same sequence in ME. In CT, U concentration means were significantly higher in C-horizon soils overlying Avalonian granites, and U concentrations ranged as high as 14 mg/kg, compared to those in C-horizon soil samples collected from other New England states, which ranged as high as 6.1 mg/kg in a sample in NH overlying the NH-ME Sequence. Element concentrations in C-horizon soils in CT were compared with those in samples collected from shallower depths. Concentrations of most major elements were highest in C-horizon soil samples, including Al, Ca, Fe, K, Na, and Ti, but element concentrations showed a relatively similar pattern in A-horizon and surficial soil samples among the underlying geologic provinces. Trace element concentrations, including Ba, W, Ga, Ni, Cs, Rb, Sr, Th, Sc, and U, also were higher in C-horizon soil samples than in overlying soil samples. Concentrations of Mg, and several trace elements, including Mn, P, As, Nb, Sn, Be, Bi, Hg, Se, Sb, La, Co, Cr, Pb, V, Y, Cu, Pb, and Zn were highest in some A-horizon or surficial soils, and indicate possible contributions from anthropogenic sources. Because element concentrations in soils above the C horizon are more likely to be affected by anthropogenic factors, concentration ranges in C-horizon soils and their spatially varying geologic associations should be considered when estimating background concentrations of elements in CT soils.

Connecticut↗
USGS2010

Methane hydrate-bearing seeps as a source of aged dissolved organic carbon to the oceans

Marine sediments contain about 500–10,000 Gt of methane carbon1, 2, 3, primarily in gas hydrate. This reservoir is comparable in size to the amount of organic carbon in land biota, terrestrial soils, the atmosphere and sea water combined1, 4, but it releases relatively little methane to the ocean and atmosphere5. Sedimentary microbes convert most of the dissolved methane to carbon dioxide6, 7. Here we show that a significant additional product associated with microbial methane consumption is methane-derived dissolved organic carbon. We use Δ14C and δ13C measurements and isotopic mass-balance calculations to evaluate the contribution of methane-derived carbon to seawater dissolved organic carbon overlying gas hydrate-bearing seeps in the northeastern Pacific Ocean. We show that carbon derived from fossil methane accounts for up to 28% of the dissolved organic carbon. This methane-derived material is much older, and more depleted in 13C, than background dissolved organic carbon. We suggest that fossil methane-derived carbon may contribute significantly to the estimated 4,000–6,000 year age of dissolved organic carbon in the deep ocean8, and provide reduced organic matter and energy to deep-ocean microbial communities.

Nature Geoscience↗
USGS2013

Crustal P-wave velocity structure from Altyn Tagh to Longmen mountains along the Taiwan-Altay geoscience transect

Based upon the seismic experiments along Geoscience Transect from the Altyn Tagh to the Longmen Mountains, the crustal P-wave velocity structure was derived to outline the characteristics of the crust in the eastern margin of Tibetan Plateau. The section shows a few significant features. The crustal thickness varies dramatically, and is consistent with the tectonic settings. The Moho boundary abruptly drops to 73km depth beneath the southern Altyn Tagh from 50km in the Tarim basin, then rises again to about 58km depth beneath the Qaidam basin. The Moho drops again to about 70km underneath the Songpan-Garzê Terrane, then rises stepwise to 60km near Longmen Mountains. To further southeast, the crust thins to 52km beneath the Sichuan basin in the southeast of Longmen Mountains. In the north of the Kunlun Fault, a low-velocity zone,which may be a layer of melted rocks due to high temperature and pressure in the depth,exists in the the bottom of the middle crust.The two depressions of the Moho correlate with the Qilian and Songpan-Garzê Terranes, implying that these two mountains have deep roots. According to our results, it is deduced that the thick crust of the northeastern Tibetan Plateau probably is a result of east-west and northwest-southeast crustal shortening since the Mesozoic during the collision of the Asian and Indian plates.

Taiwan-Altay geoscience transect↗
USGS2008

The role of local soil-induced amplification in the 27 July 1980 northeastern Kentucky earthquake

Amplification of earthquake ground motions by near-surface soil deposits was believed to have occurred in Maysville, Kentucky, U.S.A. during the northeast Kentucky (Sharpsburg) earthquake (mb,Lg 5.3) of July 27, 1980. The city of Maysville, founded on approximately 30 m of Late Quaternary Ohio River flood plain alluvium, was 52 km from the epicenter, but experienced equivalent or higher Modified Mercalli Intensity (MMI) VII, compared with the epicentral area of the earthquake (i.e., MMI VI-VII). In this study, dynamic soil properties were obtained at 10 sites in Maysville using seismic P-wave and S-wave (SH-mode) refraction and reflection methods. Synthetically generated composite time histories and limited geotechnical information, along with the measured dynamic properties, were used to perform one-dimensional linear-equivalent amplification analyses. The results indicated the soils generated ground-motion amplification factors between 3.0 and 6.0 and at a frequency range between 2.0 and 5.0 Hz (0.2 to 0.5 s). The building damage in Maysville from the Sharpsburg earthquake was predominantly found in one- to three-story masonry structures. The estimated fundamental period for one- to three-story masonry buildings is approximately 0.11 to 0.26 s (3.8 to 9 Hz). These correlations suggest the elevated ground motion intensity in Maysville can be accounted for by near-surface soil-amplification effects and resonance of the ground motion by the buildings (i.e., double resonance).

Environmental & Engineering Geoscience↗
USGS2002

Description and comparison of geologic maps with FRAGSTATS - A spatial statistics program

FRAGSTATS is a public-domain GIS implementation of a set of spatial statistics that address a fundamental problem in GIS applications, description and comparison of maps. The spatial statistics from the 1:2,500,000-scale United States geologic map of Nevada, the central United States, and the northeastern United States quantify the differences in complexity and variability between these three geologic terranes. Nevada is defined by a large number of patches of small size and low size variability, whereas the Central area has a small number of patches with smaller relative size variability. All three areas have similar map-unit shape complexity with Nevada having the lowest. Based on the density of edges, the areas can be ranked from highest to lowest, as Nevada, Central, and Northeast. The Shannon diversity index ranks the areas from highest to lowest, as Northeast, Nevada, and Central, but the Shannon evenness index ranks them from highest to lowest, as Northeast, Central, and Nevada. These rankings may reflect the influence of folding in the Northeast and Central areas as opposed to basin and range extension in Nevada. The core areas statistic ranks the areas for spatial accuracy from highest to lowest, as Central, Northeast, and Nevada, with Northeast and Nevada being similar. For a scale comparison, the FRAGSTATS statistics quantify the increased complexity and spatial accuracy that is inherent in going from small- to larger-scale maps. For example for 1:2,500,000-1:500,000-scale maps of Nevada, respectively, the area weighted fractal dimension increase from 1.1 to 1.18, and the total core areas index almost doubles from 39.09 to 63.38. In addition, the fractal dimensions discriminate gross lithology and tectonic terranes. ?? 2002 Elsevier Science Ltd. All rights reserved.

Computers & Geosciences↗
USGS2014

Porphyry copper assessment of eastern Australia

The U.S. Geological Survey (USGS) conducts national and global assessments of resources (mineral, energy, water, and biologic) to provide science in support of decision making. Mineral resource assessments provide syntheses of available information about where mineral deposits are known and suspected to occur in the Earth&rsquo;s crust and which commodities may be present, together with estimates of amounts of resources that may be present in undiscovered deposits. The USGS collaborated with geologists of the Geological Survey of New South Wales and Geoscience Australia (formerly the Australian Geological Survey Organisation) on an assessment of Phanerozoic-age porphyry copper resources in Australia. Porphyry copper deposits contain about 11 percent of the identified copper resources in Australia. This study addresses resources of known porphyry copper deposits and expected resources of undiscovered porphyry copper deposits in eastern Australia. A three-part form of assessment was used for estimation of undiscovered resources. Using this method, four tracts were delineated that are permissive for porphyry copper deposits. A probabilistic estimate of the expected number of deposits in each tract was prepared on the basis of existing information about geology, geochemistry, geophysics, exploration history, and mineral occurrences. Monte Carlo simulation was used to combine the estimated number of deposits with an appropriate model of grade and tonnage for porphyry copper deposits to provide a probabilistic estimate of metal content and total tonnage for undiscovered deposits. The Delamerian permissive tract comprises igneous rocks of Cambrian age in the Delamerian Orogen, which borders the western margin of the Tasmanides. The Delamerian tract contains no known porphyry copper deposits, but the Adelaide sub-tract, one of three sub-tracts that compose the Delamerian tract, contains four porphyry copper prospects. The Adelaide sub-tract is estimated to contain 2.5&plusmn;2.2 undiscovered deposits in an area of about 50,700 square kilometers. The Macquarie permissive tract comprises volcanic, volcaniclastic, and minor exposed intrusive igneous rocks of the Macquarie Arc. The nine known deposits in this tract are now estimated to contain a total of about 13.5 million metric tons of copper and 1,700 metric tons of gold. This tract is estimated to contain 6.9&plusmn;3.5 undiscovered deposits for a total of about 16 deposits in an area of about 41,500 square kilometers. The Yeoval permissive tract includes subequal areas of permissive volcanic and intrusive rocks of Silurian to Devonian age exposed in and around the Cowra-Buchan Rift System, which overlaps the previously accreted Macquarie Arc. The Yeoval tract contains one porphyry copper deposit and several porphyry copper prospects. This tract is estimated to contain 1.3&plusmn;0.75 undiscovered porphyry copper deposits, for a total of about 2 expected deposits in an area of about 53,200 square kilometers. The East Tasmanide permissive tract includes a semi-continuous belt of plutonic and subordinate volcanic rocks along the eastern margins of Queensland and northeastern New South Wales. The East Tasmanide tract contains 14 known porphyry copper deposits and many porphyry copper prospects, which are all in the Central sub-tract. This sub-tract is expected to contain 4.8&plusmn;3.3 undiscovered porphyry copper deposits, for a total of about 19 deposits in an area of about 291,000 square kilometers. This assessment estimates that 15 undiscovered deposits contain an arithmetic mean of ~21 million metric tons or more of copper in four tracts, in addition to the 24 known porphyry copper deposits that contain identified resources of ~16 million metric tons of copper. In addition to copper, the mean expected amount of undiscovered byproduct gold predicted by the simulation is ~1,500 metric tons. The probability associated with these arithmetic means is on the order of 30 percent. Median expected amounts of metals predicted by the simulations may be ~50 percent lower than mean estimates.

Scientific Investigations Report↗
USGS2005

Environmental impacts of oil production on soil, bedrock, and vegetation at the U.S. Geological Survey Osage-Skiatook Petroleum Environmental Research site A, Osage County, Oklahoma

The U.S. Geological Survey is investigating the impacts of oil and gas production on soils, groundwater, surface water, and ecosystems in the United States. Two sites in northeastern Oklahoma (sites A and B) are presently being investigated under the Osage–Skiatook Petroleum Environmental Research project. Oil wells on the lease surrounding site A in Osage County, Oklahoma, produced about 100,000 bbl of oil between 1913 and 1981. Prominent production features on the 1.5-ha (3.7-ac) site A include a tank battery, an oil-filled trench, pipelines, storage pits for both produced water and oil, and an old power unit. Site activities and historic releases have left open areas in the local oak forest adjacent to these features and a deeply eroded salt scar downslope from the pits that extends to nearby Skiatook Lake. The site is underlain by surficial sediments comprised of very fine-grained eolian sand and colluvium as much as 1.4 m (4.6 ft) thick, which, in turn, overlie flat-lying, fractured bedrock comprised of sandstone, clayey sandstone, mudstone, and shale. A geophysical survey of ground conductance and concentration measurements of aqueous extracts (1:1 by weight) of core samples taken in the salt scar and adjacent areas indicate that unusual concentrations of NaCl-rich salt are present at depths to at least 8 m (26 ft) in the bedrock; however, little salt occurs in the eolian sand. Historic aerial photographs, anecdotal reports from oil-lease operators, and tree-ring records indicate that the surrounding oak forest was largely established after 1935 and thus postdates the majority of surface damage at the site. Blackjack oaks adjacent to the salt scar have anomalously elevated chloride ( 400 ppm) in their leaves and record the presence of NaCl-rich salt or salty water in the shallow subsurface. The geophysical measurements also indicate moderately elevated conductance beneath the oak forest adjoining the salt scar.

Oklahoma↗