Search USGS⌕ Search

SEARCH · Search USGS

Results for “Geotechnical Testing Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS1992

Tensiometers: Theory, construction, and use

Standard tensiometers are used to measure matric potential as low as −870 cm of water in the unsaturated zone by creating a saturated hydraulic link between the soil water and a pressure sensor. The direction and, in some cases, quantity of water flux can be determined using multiple installations. A variety of commercial and fabricated tensiometers are commonly used. Saturated porous ceramic materials, which form an interface between the soil water and the bulk water inside the instrument, are available in many shapes, sizes, and pore diameters. A gage, manometer, or electronic pressure transducer is connected to the porous material with small- or large-diameter tubing. Selection of these components allows the user to optimize one or more characteristics, such as accuracy, versatility, response time, durability, maintenance, extent of data collection, and cost. Special designs have extended the normal capabilities of tensiometers, allowing measurement in cold or remote areas, measurement of matric potential as low as −153 m of water (−15 bars), measurement at depths as deep as 6 m (recorded at land surface), and automatic measurement using as many as 22 tensiometers connected to a single pressure transducer. Continuous hydraulic connection between the porous material and soil, and minimal disturbance of the natural infiltration pattern are necessary for successful installation. Avoidance of errors caused by air invasion, nonequilibrium of the instrument, or pressure-sensor inaccuracy will produce reliable values of matric potential, a first step in characterizing unsaturated flow.

Geotechnical Testing Journal↗
USGS1998

Theoretical Evaluation of the Transient Response of Constant Head and Constant Flow-Rate Permeability Tests

A theoretical analysis is presented that compares the response characteristics of the constant head and the constant flowrate (flow pump) laboratory techniques for quantifying the hydraulic properties of geologic materials having permeabilities less than 10-10 m/s. Rigorous analytical solutions that describe the transient distributions of hydraulic gradient within a specimen are developed, and equations are derived for each method. Expressions simulating the inflow and outflow rates across the specimen boundaries during a constant-head permeability test are also presented. These solutions illustrate the advantages and disadvantages of each method, including insights into measurement accuracy and the validity of using Darcy's law under certain conditions. The resulting observations offer practical considerations in the selection of an appropriate laboratory test method for the reliable measurement of permeability in low-permeability geologic materials.

Geotechnical Testing Journal↗
USGS1985

An underwater instrument for determining bearing capacity of shallow marine sediments

A small, portable, underwater instrument for measuring carbonate substrate bearing capacity in situ is described. The device was used in various shallow water (< 9 m) carbonate reef environments. Criteria for design and operation were based on ability to deliver controlled levels of stress to bearing plates of various sizes, operability underwater by scuba divers, transportability, and cost.

Geotechnical Testing Journal↗
USGS1989

Graphical method for determining the coefficient of consolidation c from a flow-pump permeability test

A graphical method has been developed for determining the coefficient of consolidation from the transient phases of a flow-pump permeability test. The flow pump can be used to infuse fluid into or withdraw fluid from a laboratory sediment specimen at a constant volumetric rate in order to obtain data that can be used to calculate permeability using Darcy's law. When the initial transient-response curve (hydraulic head as a function of time) generated by this test is examined analytically in terms of a one-dimensional consolidation process, representative type-curve solutions to the associated forced-flow and pressure-decay models are derived. These curves provide the basis for graphically evaluating the permeability k , the coefficient of consolidation c v , and the coefficient of volume change m v . The curve-matching technique is easy and rapid, and it can be applied to results of forced-flow tests, both infusion and withdrawal, as well as to subsequent pressure-decay records. Values of k, c v , and m v for a laterally confined kaolinite specimen were determined by this graphical method and appear to be in reasonably good agreement with numerically derived estimates (within 20%). Discrepancies between the two sets of results seem to be largely a function of data quality rather than of method of analysis. Where responses of hydraulic head as a function of time are apparently unaffected by experimental sources of error, agreement is excellent (within 4%). Application of this graphical method to triaxial testing has inherent uncertainties, because the solution curves that describe one-dimensional deformation are used to analyze a three-dimensional process.

Geotechnical Testing Journal↗
USGS2000

Evaluation and application of the transient-pulse technique for determining the hydraulic properties of low permeability rocks: Part 2: Experimental application

In Part 1 of this study, the general solution to the transient-pulse test (Hsieh et al. 1981) was extended to evaluate quantitatively the transient variations in hydraulic head and the corresponding distributions of hydraulic gradient within a test specimen. In addition, the conditions and the validity of using the expression proposed by Brace et al. (1968) to compute the low permeability of a rock specimen from a transient-pulse test were examined. Some theoretical considerations related to the optimal design of a transient-pulse test were also discussed. Part 2 presents a relatively general and convenient approach for determining not only the hydraulic conductivity and specific storage of a specimen directly from a transient-pulse test, but also the compressive storage of the fluid reservoirs. The accuracy and efficiency of this method are demonstrated through (1) the comparison of the compressibility of the fluid-reservoir (permeating) system back-calculated from the transient-pulse tests with the value obtained from calibration tests, and (2) its application to a series of experimental studies designed to investigate the effects of confining pressure on the hydraulic properties of Shirahama sandstone and Inada granite, two rock types available widely in Japan.

Geotechnical Testing Journal↗
USGS2026

Design and functionality analysis of the high-stress permeameter (HSP), a device developed for measuring mechanical and hydraulic properties of gas hydrate-bearing pressure core

To characterize sediment compressibility and permeability in the presence of gas hydrate, a naturally occurring combination of water and methane that requires elevated pressure and reduced temperature to remain stable, a high-stress permeameter (HSP) device was developed. The HSP was designed to accept gas hydrate-bearing pressure core specimens in their plastic liner at pressures of 10–11 MPa. The HSP was further designed to carry out compressibility and permeability tests over a range of effective stresses while maintaining the requirements for gas hydrate stability. To verify the validity of HSP measurements of sediment consolidation properties, we tested remolded kaolin samples in the HSP and three standard fixed-ring oedometers. Furthermore, we compared the direct fluid-flow permeability measurements from the HSP with estimates based on Terzaghi’s log-time method for calculating permeability from 1-dimensional oedometer-style consolidation tests. We found agreement between all devices for consolidation (e.g., coefficients of compressibility and recompression) and permeability results. These findings indicate the suitability of the HSP for consolidation tests, as well as the log-time method for estimating permeability from oedometer consolidation tests.

Geotechnical Testing Journal↗
USGS2013

Hysteresis of unsaturated hydromechanical properties of a silty soil

Laboratory tests to examine hysteresis in the hydrologic and mechanical properties of partially saturated soils were conducted on six intact specimens collected from a landslide-prone area of Alameda County, California. The results reveal that the pore-size distribution parameter remains statistically unchanged between the wetting and drying paths; however, the wetting or drying state has a pronounced influence on the water-entry pressure, the water-filled porosity at zero suction, and the saturated hydraulic conductivity. The suction stress values obtained from the shear-strength tests under both natural moisture and resaturated conditions were mostly bounded by the suction stress characteristic curves (SSCCs) obtained from the hydrologic tests. This finding experimentally confirms that the soil-water retention curve, hydraulic conductivity function, and SSCC are intrinsically related.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS1997

Assessment of liquefaction potential during earthquakes by Arias intensity

An Arias intensity approach to assess the liquefaction potential of soil deposits during earthquakes is proposed, using an energy-based measure of the severity of earthquake-shaking recorded on seismograms of the two horizontal components of ground motion. Values representing the severity of strong motion at depth in the soil column are associated with the liquefaction resistance of that layer, as measured by in situ penetration testing (SPT, CPT). This association results in a magnitude-independent boundary that envelopes initial liquefaction of soil in Arias intensity-normalized penetration resistance space. The Arias intensity approach is simple to apply and has proven to be highly reliable in assessing liquefaction potential. The advantages of using Arias intensity as a measure of earthquake-shaking severity in liquefaction assessment are: Arias intensity is derived from integration of the entire seismogram wave form, incorporating both the amplitude and duration elements of ground motion; all frequencies of recorded motion are considered; and Arias intensity is an appropriate measure to use when evaluating field penetration test methodologies that are inherently energy-based. Predictor equations describing the attenuation of Arias intensity as a function of earthquake magnitude and source distance are presented for rock, deep-stiff alluvium, and soft soil sites.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS2014

Experimental test of theory for the stability of partially saturated vertical cut slopes

This paper extends Culmann's vertical-cut analysis to unsaturated soils. To test the extended theory, unsaturated sand was compacted to a uniform porosity and moisture content in a laboratory apparatus. A sliding door that extended the height of the free face of the slope was lowered until the vertical cut failed. Digital images of the slope cross section and upper surface were acquired concurrently. A recently developed particle image velocimetry (PIV) tool was used to quantify soil displacement. The PIV analysis showed strain localization at varying distances from the sliding door prior to failure. The areas of localized strain were coincident with the location of the slope crest after failure. Shear-strength and soil-water-characteristic parameters of the sand were independently tested for use in extended analyses of the vertical-cut stability and of the failure plane angle. Experimental failure heights were within 22.3% of the heights predicted using the extended theory.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS1995

Mudflow generated by retrogressive slope failure, Santa Barbara Basin, California continental borderland

The morphology and internal geometry of a mudflow deposit on the mainland slope of the Santa Barbara Basin are defined using high-resolution seismic-reflection data in combination with core samples. Sediment failure occurred on a 4 degrees slope in the uppermost part of late Quaternary well-bedded slope deposits. The failure zone extends from water depths of 374-510 m near the base of slope, occupies an area of 4 km 2 , and involved the translation of 0.01-0.02 km 3 of sediment. Major geomorphic features of the mudflow deposit include a headscarp 6-8 m high, a scar 50-700 m wide, and a main body 1 km long and 12 m thick. The hummocky surface of the mudflow deposits, their chaotic internal structure, and the bulbous toe tapering upslope to a thin tail are consistent with mass flow involving extensive internal deformation. Sediment failed in stages, ending with upslope retrogressive retreat of the headwall along the east side of the failure zone. Known sedimentation rates of 0.8-1.4 m/k.y., as well as the presence of a thin (0.15-0.5 m thick) sediment cap resting atop the scar surface, indicate that the failure probably occurred within the past few centuries. A geotechnical analysis incorporating the results of both static and dynamic triaxial strength tests shows that the failure was probably caused by a strong (M nearly equal 7.5) nearby earthquake. The weakened sediment that remained after earthquake shaking continued to flow down the gentle basin slope under the stresses generated by gravity alone. The analysis also shows that much of the slope sediment is marginally stable and that additional mudflows will probably occur during future strong seismic shaking.

California↗
USGS1986

Regional method to assess offshore slope stability.

The slope stability of some offshore environments can be evaluated by using only conventional acoustic profiling and short-core sampling, followed by laboratory consolidation and strength testing. The test results are synthesized by using normalized-parameter techniques. The normalized data are then used to calculate the critical earthquake acceleration factors or the wave heights needed to initiate failure. These process-related parameters provide a quantitative measure of the relative stability for locations from which short cores were obtained. The method is most applicable to offshore environments of gentle relief and simple subsurface structure and is not considered a substitute for subsequent site-specific analysis. -from ASCE Publications Information

Journal of Geotechnical Engineering↗
USGS2014

Interrelations among the soil-water retention, hydraulic conductivity, and suction-stress characteristic curves

The three fundamental constitutive relations that describe fluid flow, strength, and deformation behavior of variably saturated soils are the soil-water retention curve (SWRC), hydraulic conductivity function (HCF), and suction-stress characteristic curve (SSCC). Until recently, the interrelations among the SWRC, HCF, and SSCC have not been well established. This work sought experimental confirmation of interrelations among these three constitutive functions. Results taken from the literature for six soils and those obtained for 11 different soils were used. Using newly established analytical relations among the SWRC, HCF, and SSCC and these test results, the authors showed that these three constitutive relations can be defined by a common set of hydromechanical parameters. The coefficient of determination for air-entry pressures determined independently using hydraulic and mechanical methods is >0.99, >0.98 for the pore size parameter, and 0.94 for the residual degree of saturation. One practical implication is that one of any of the four experiments (axis-translation, hydraulic, shear-strength, or deformation) is sufficient to quantify all three constitutive relations.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS1999

Liquefaction and soil failure during 1994 Northridge earthquake

The 1994 Northridge, Calif., earthquake caused widespread permanent ground deformation on the gently sloping alluvial fan surface of the San Fernando Valley. The ground cracks and distributed deformation damaged both pipelines and surface structures. To evaluate the mechanism of soil failure, detailed subsurface investigations were conducted at four sites. Three sites are underlain by saturated sandy silts with low standard penetration test and cone penetration test values. These soils are similar to those that liquefied during the 1971 San Fernando earthquake, and are shown by widely used empirical relationships to be susceptible to liquefaction. The remaining site is underlain by saturated clay whose undrained shear strength is approximately half the value of the earthquake-induced shear stress at this location. This study demonstrates that the heterogeneous nature of alluvial fan sediments in combination with variations in the ground-water table can be responsible for complex patterns of permanent ground deformation. It may also help to explain some of the spatial variability of strong ground motion observed during the 1994 earthquake.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS2013

Shear-wave velocity-based probabilistic and deterministic assessment of seismic soil liquefaction potential

Shear-wave velocity (V s ) offers a means to determine the seismic resistance of soil to liquefaction by a fundamental soil property. This paper presents the results of an 11-year international project to gather new V s site data and develop probabilistic correlations for seismic soil liquefaction occurrence. Toward that objective, shear-wave velocity test sites were identified, and measurements made for 301 new liquefaction field case histories in China, Japan, Taiwan, Greece, and the United States over a decade. The majority of these new case histories reoccupy those previously investigated by penetration testing. These new data are combined with previously published case histories to build a global catalog of 422 case histories of V s liquefaction performance. Bayesian regression and structural reliability methods facilitate a probabilistic treatment of the V s catalog for performance-based engineering applications. Where possible, uncertainties of the variables comprising both the seismic demand and the soil capacity were estimated and included in the analysis, resulting in greatly reduced overall model uncertainty relative to previous studies. The presented data set and probabilistic analysis also help resolve the ancillary issues of adjustment for soil fines content and magnitude scaling factors.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS2004

Standard penetration test-based probabilistic and deterministic assessment of seismic soil liquefaction potential

This paper presents'new correlations for assessment of the likelihood of initiation (or triggering) of soil liquefaction. These new correlations eliminate several sources of bias intrinsic to previous, similar correlations, and provide greatly reduced overall uncertainty and variance. Key elements in the development of these new correlations are (1) accumulation of a significantly expanded database of field performance case histories; (2) use of improved knowledge and understanding of factors affecting interpretation of standard penetration test data; (3) incorporation of improved understanding of factors affecting site-specific earthquake ground motions (including directivity effects, site-specific response, etc.); (4) use of improved methods for assessment of in situ cyclic shear stress ratio; (5) screening of field data case histories on a quality/uncertainty basis; and (6) use of high-order probabilistic tools (Bayesian updating). The resulting relationships not only provide greatly reduced uncertainty, they also help to resolve a number of corollary issues that have long been difficult and controversial including: (1) magnitude-correlated duration weighting factors, (2) adjustments for fines content, and (3) corrections for overburden stress. ?? ASCE.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS2015

Closing the loop of the soil water retention curve

The authors, to their knowledge for the first time, produced two complete principal soil water retention curves (SWRCs) under both positive and negative matric suction regimes. An innovative testing technique combining the transient water release and imbibition method (TRIM) and constant flow method (CFM) was used to identify the principal paths of SWRC in the positive pore-water pressure regime under unsaturated conditions. A negative matric suction of 9.8 kPa is needed to reach full saturation or close the loop of the SWRC for a silty soil. This work pushes the understanding of the interaction of soil and water into new territory by quantifying the boundaries of the SWRC over the entire suction domain, including both wetting and drying conditions that are relevant to field conditions such as slope wetting under heavy rainfall or rapid groundwater table rise in earthen dams or levees.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS2003

Liquefaction potential index: Field assessment

Cone penetration test (CPT) soundings at historic liquefaction sites in California were used to evaluate the predictive capability of the liquefaction potential index (LPI), which was defined by Iwasaki et al. in 1978. LPI combines depth, thickness, and factor of safety of liquefiable material inferred from a CPT sounding into a single parameter. LPI data from the Monterey Bay region indicate that the probability of surface manifestations of liquefaction is 58 and 93%, respectively, when LPI equals or exceeds 5 and 15. LPI values also generally correlate with surface effects of liquefaction: Decreasing from a median of 12 for soundings in lateral spreads to 0 for soundings where no surface effects were reported. The index is particularly promising for probabilistic liquefaction hazard mapping where it may be a useful parameter for characterizing the liquefaction potential of geologic units.

Journal of Geotechnical and Geoenvironmental Engin↗