A study of accredited agriculture engineering curriculums
Explore the source record for details and available documents.
SEARCH · Search USGS
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
The food security problem in Africa is tied to the small farmer, whose subsistence farming relies heavily on rain-fed agriculture. A dry spell lasting two to three weeks can cause a significant yield reduction. A small-scale irrigation scheme from small-capacity ponds can alleviate this problem. This solution would require a water harvest mechanism at a farm level. In this study, we looked at the feasibility of implementing such a water harvest mechanism in drought prone parts of Africa. A water balance study was conducted at different watershed levels. Runoff (watershed yield) was estimated using the SCS curve number technique and satellite derived rainfall estimates (RFE). Watersheds were delineated from the Africa-wide HYDRO-1K digital elevation model (DEM) data set in a GIS environment. Annual runoff volumes that can potentially be stored in a pond during storm events were estimated as the product of the watershed area and runoff excess estimated from the SCS Curve Number method. Estimates were made for seepage and net evaporation losses. A series of water harvest index maps were developed based on a combination of factors that took into account the availability of runoff, evaporation losses, population density, and the required watershed size needed to fill a small storage reservoir that can be used to alleviate water stress during a crop growing season. This study presents Africa-wide water-harvest index maps that could be used for conducting feasibility studies at a regional scale in assessing the relative differences in runoff potential between regions for the possibility of using ponds as a water management tool. ?? 2004 American Society of Agricultural Engineers.
General Pumping from wells for irrigation —The Division of Irrigation, Bureau of Agricultural Engineering, United States Department of Agriculture, is investigating the economics and practice of pumping from wells for irrigation in the western United States. The study is under the charge of Carl Rohwer. Its aims are (1) to gather data pertinent to the practical and economical phases of pumping for irrigation, including mechanical units, wells, methods of pump‐installation, the assembled plant, and the efficiency of the various units, and (2) to compile all available information on methods and cost of well‐drilling and the numerous factors influencing them, such as various types of casing and relation of diameter of casing to yield. The field‐work on both phases of the study is about complete. The manuscript on the first phase of the project is in process of preliminary editing. It is intended to publish the results of the study in two bulletins, probably as Department circulars.
Investigations by the California Department of Public Works, Division of Water Resources (based on written communication from Harold Conkling, Deputy State Engineer)—the Division of Water Resources, California Department of Public Works, has in the past year conducted investigations of ground‐water problems in the great central valley of the State (California Trough); in the Salinas and Santa Clara Valleys of the central part of the State; also in the South Coastal Basin and in Ventura County, in southern California. In these investigations the Bureau of Agricultural Engineering of the United States Department of Agriculture, the Geological Survey of the United States Department of the Interior, and many local agencies have cooperated. In large part, the activities of the past year are continuations of investigations summarized in an earlier statement (A. M. Piper, Investigations of underground‐water problems in Arizona, California, New Mexico, and Oregon, National Research Council, Trans. Amer. Geophys. Union, 13th annual meeting, 308–309, 1932). Progress in 1932–35 is summarized in the following paragraphs.
Unlike the major anthropogenic changes that terrestrial and coastal habitats underwent during the last centuries such as deforestation, river engineering, agricultural practices or urbanism, those occurring underwater are veiled from our eyes and have continued nearly unnoticed. Only recent advances in remote sensing and deep marine sampling technologies have revealed the extent and magnitude of the anthropogenic impacts to the seafloor. In particular, bottom trawling, a fishing technique consisting of dragging a net and fishing gear over the seafloor to capture bottom-dwelling living resources has gained attention among the scientific community, policy makers and the general public due to its destructive effects on the seabed. Trawling gear produces acute impacts on biota and the physical substratum of the seafloor by disrupting the sediment column structure, overturning boulders, resuspending sediments and imprinting deep scars on muddy bottoms. Also, the repetitive passage of trawling gear over the same areas creates long-lasting, cumulative impacts that modify the cohesiveness and texture of sediments. It can be asserted nowadays that due to its recurrence, mobility and wide geographical extent, industrial trawling has become a major force driving seafloor change and affecting not only its physical integrity on short spatial scales but also imprinting measurable modifications to the geomorphology of entire continental margins.
DayCent is a biogeochemical model of intermediate complexity widely used to simulate greenhouse gases (GHG), soil organic carbon and nutrients in crop, grassland, forest and savannah ecosystems. Although this model has been applied to a wide range of ecosystems, it is still typically parameterized through a traditional “trial and error” approach and has not been calibrated using statistical inverse modelling (i.e. algorithmic parameter estimation). The aim of this study is to establish and demonstrate a procedure for calibration of DayCent to improve estimation of GHG emissions. We coupled DayCent with the parameter estimation (PEST) software for inverse modelling. The PEST software can be used for calibration through regularized inversion as well as model sensitivity and uncertainty analysis. The DayCent model was analysed and calibrated using N2O flux data collected over 2 years at the Iowa State University Agronomy and Agricultural Engineering Research Farms, Boone, IA. Crop year 2003 data were used for model calibration and 2004 data were used for validation. The optimization of DayCent model parameters using PEST significantly reduced model residuals relative to the default DayCent parameter values. Parameter estimation improved the model performance by reducing the sum of weighted squared residual difference between measured and modelled outputs by up to 67 %. For the calibration period, simulation with the default model parameter values underestimated mean daily N2O flux by 98 %. After parameter estimation, the model underestimated the mean daily fluxes by 35 %. During the validation period, the calibrated model reduced sum of weighted squared residuals by 20 % relative to the default simulation. Sensitivity analysis performed provides important insights into the model structure providing guidance for model improvement.
Understanding groundwater recharge is essential for successful management of water resources and modeling fluid and contaminant transport within the subsurface. This book provides a critical evaluation of the theory and assumptions that underlie methods for estimating rates of groundwater recharge. Detailed explanations of the methods are provided - allowing readers to apply many of the techniques themselves without needing to consult additional references. Numerous practical examples highlight benefits and limitations of each method. Approximately 900 references allow advanced practitioners to pursue additional information on any method. For the first time, theoretical and practical considerations for selecting and applying methods for estimating groundwater recharge are covered in a single volume with uniform presentation. Hydrogeologists, water-resource specialists, civil and agricultural engineers, earth and environmental scientists and agronomists will benefit from this informative and practical book. It can serve as the primary text for a graduate-level course on groundwater recharge or as an adjunct text for courses on groundwater hydrology or hydrogeology.
This report is a summary of investigations in progress in 1932 in the southwestern portion of the United States. It covers only those investigations that deal with water in the zone of saturation, and excludes those that deal primarily with water in the zone of aeration. Arizona H. C. Schwalen, Irrigation Engineer, Agricultural Experiment‐Station, Tucson, Arizona, has proposed to undertake a study of the effect of pumping from wells, and of the capacity of water‐bearing strata, but no report of progress is available. Several other hydrologic investigations are now being made by the Agricultural Experiment‐ Station, but relate primarily to infiltration and transpiration.
This article highlights current research into land and water resources, agroecosystems, and agricultural production systems published by the Natural Resources and Environmental Systems (NRES) community of ASABE journals (Transactions of the ASABE and Applied Engineering in Agriculture) in 2017. This article reviews the context, scope, and key results of the published articles and perhaps more importantly recommends areas for increased research attention. Experimental and modeling advances were described in hydrology, agroecosystems, climate-change effects, soil erosion, irrigation, drainage, forest resources, livestock systems, natural treatment systems, international water issues, and water quality topic areas. Three special collections were published (International Watershed Technology, Crop Modeling to Optimize Water Use, and Advances in Drainage). Other focal areas included 14 articles relating to livestock waste management, 13 concerning irrigated agricultural systems, 8 addressing climate change effects on land and water resources, and 16 on various aspects of soil erosion measurement and modeling. Building on the articles reviewed from 2017 and toward a vision of future agroecosystems research, the NRES community of ASABE journals strives to grow its role in making new knowledge accessible to sustain agricultural and natural systems in a changing world. In this vane, recommendations for future research direction are discussed with an emphasis on increased application of remote sensing data to agroecosystems research, improved assessment of agroecosystem resiliency and vulnerability to land and climate change, development of integrated models of agroecosystem services, meeting stubborn water management challenges in agricultural production systems, and focusing on publishing fully reproducible model results.
Drought and intensive land use can interact as stressors on riparian vegetation, especially along rivers flowing through seasonally dry landscapes. Knowledge of past riparian vegetation response to drought and land use change can provide land managers with a better understanding of changes induced by upstream management actions, climate change, and chronic stressors. To investigate the response of riparian vegetation productivity to drought and land use, we developed a 21-year time series (2000–2020) of growing season vegetation dynamics using near-infrared reflectance of vegetation (NIR V ) derived from satellite data across 30 watershed subbasins that drain into the San Francisco Bay Delta in central California, USA. We observed a strong response of riparian vegetation to drought, but rapid recovery and very few long-term declines in productivity. At a local level, vegetation communities' response to drought and post-drought productivity dynamics were highly variable across biophysical settings and land use gradients. Most of the riparian areas with long-term declines in NIR V were located in the lower elevation Coast Range on the western side of the study area where there is little to no water engineering or agricultural irrigation runoff to subsidize riparian vegetation. Riparian areas with the greatest long-term increase were along rivers draining the higher elevation Sierra Nevada range to the east. Our results suggest that river systems with a high proportion of water originating as snowmelt may be more buffered against long-term drought-driven declines in productivity than those dependent exclusively on winter rainfall. The long-term increase in NIR V in the vast majority of riparian areas within our study area may also have been driven in part by increasing atmospheric CO 2 concentrations, which have been shown to increase plant water use efficiency.
West Dongting Lake in China is important for human livelihoods and habitat of migratory waterfowl and other wildlife. The waterway re-engineering and agriculture intensification have contributed to changes in hydrology, sediment, and vegetation on the floodplain. This paper describes an EcoPartnership program conducted by the U.S. Geological Survey, Wetland and Aquatic Research Center, and Beijing Forestry University. It focused on the development of a wetland ecosystem network in West Dongting Lake with technical support from the U.S. partner using a number of related studies to examine wetland vegetation dynamics from upstream to downstream along the tributaries. The results of U.S. studies showed that the regeneration potential of species might be altered by changes in climate and local environment, and seed bank depletion by germination may be a major conservation threat in a future with recurring droughts in swamps of the southeastern United States. In the monsoonal wetlands of West Dongting Lake, the soil seed bank could be used as a seed source for revegetation after hydrologic restoration with the introduction of certain foundational species and the removal of poplar plantations. Also, West Dongting Lake is at high ecological risk of mercury pollution. Wetland ecosystem monitoring may allow managers to use the information to predict effects of climate change, water level and flow changes on sedimentation, and to manage for desired vegetation to support waterfowl and ecosystem services. The cooperation of two countries through the EcoPartnership program is now well established and poised for extensive research projects in the future.
Quantitative estimates of ground-water pumpage from the principal ground-water basins in California are necessary for future appraisal studies, for constructing hydrologic models, and for systematic planning of water use and conservation. Methods of estimating pumpage for this report are based on metered pumpages, on electric-power consumption and fuel consumption by internal-combustion engines or agricultural wells, and on duty of water for municipal areas. This report is the third of a series planned to include the Central Valley of California.
Sixteen aquifers in Arkansas that currently serve or have served as sources of water supply are described with respect to existing groundwater protection and management programs, geology, hydrologic characteristics, water use, water levels, deductive analysis, projections of hydrologic conditions, and water quality. State and Federal protection and management programs are described according to regulatory oversight, management strategies, and ambient groundwater-monitoring programs that currently (2013) are in place for assessing and protecting groundwater resources throughout the State. Physical attributes, groundwater geochemistry, and groundwater quality are described for each of the 16 aquifers of the State. Information in regard to the hydrology and geochemistry of each of the aquifers is summarized from about 550 historical and recent publications. Additionally, more than 8,000 sites with groundwater-quality data were obtained from the U.S. Geological Survey National Water Information System and the Arkansas Department of Environmental Quality databases and entered into a spatial database to investigate distribution and trends in chemical constituents for each of the aquifers. The 16 aquifers of the State were divided into two major physiographic regions of the State: the Coastal Plain Province (referred to as Coastal Plain) of eastern and southern Arkansas, which includes 11 of the 16 aquifers, and the Interior Highlands Division (referred to as Interior Highlands) of western Arkansas, which includes the remaining 5 aquifers. The 11 aquifers in the Coastal Plain consist of various geologic units that are Cenozoic in age and consist primarily of Cretaceous, Tertiary, and Quaternary sands, gravels, silts, and clays. Groundwater in the Coastal Plain represents one of the most valuable natural resources in the State, driving the economic engines of agriculture, while also supplying abundant water for commercial, industrial, and public-supply use. In terms of age from youngest to oldest, the aquifers of the Coastal Plain include Quaternary alluvial aquifers, including the Mississippi River Valley alluvial aquifer (the most important aquifer in Arkansas in terms of volume of use and economic benefits), the Jackson Group (a regional confining unit that served for decades as an important source of domestic supply), and the Cockfield, Sparta, Cane River, Carrizo, Wilcox, Nacatoch, Ozan, Tokio, and Trinity aquifers. The Mississippi River Valley alluvial aquifer accounts for approximately 94 percent of all groundwater used in the State, and the aquifer is used primarily for irrigation purposes. The Sparta aquifer is the second most important aquifer in terms of use, and the aquifer was used in the past dominantly as a source of public and industrial supply, although increasing irrigation use is occurring because of critically declining water levels in the Mississippi River Valley alluvial aquifer. Other aquifers of the Coastal Plain generally are used as important local sources of domestic, industrial, and public supply, in addition to other minor uses. Water quality generally is good for all aquifers of the Coastal Plain, except for elevated iron concentrations and localized areas of high salinity. The high salinity results from intrusion from underlying formations, evapotranspiration processes in areas of low recharge, and inadequate flushing in downgradient areas of residual salinity from deposition in marine environments. Trends in the spatial distribution of individual chemical constituents are related to position along the flow path for most aquifers of the Coastal Plain. These trends include elevated iron and nitrate concentrations with lower pH values and dissolved solids in groundwater from the outcrop areas, transitioning to lower iron and nitrate (related to changes in redox) and higher pH and dissolved solids (dominantly from the dissolution of carbonate minerals) in groundwater downgradient from outcrop areas. Groundwater generally trended from a calcium- to a sodium-bicarbonate water type with increasing cation exchange along the flow path. The Interior Highlands of western Arkansas has less reported groundwater use than other areas of the State, reflecting a combination of factors. These factors include prevalent and increasing use of surface water, less intensive agricultural uses, lower population and industry densities, lesser potential yield of the resource, and lack of detailed reporting. The overall low yields of aquifers of the Interior Highlands result in domestic supply as the dominant use, with minor industrial, public, and commercial-supply use. Where greater volumes are required for growth of population and industry, surface water is the greatest supplier of water needs in the Interior Highlands. The various aquifers of the Interior Highlands generally occur in shallow, fractured, well-indurated, structurally modified bedrock of this mountainous region of the State, as compared to the relatively flat-lying, unconsolidated sediments of the Coastal Plain. In terms of age from youngest to oldest, the aquifers of the Interior Highlands include: the Arkansas River Valley alluvial aquifer, the Ouachita Mountains aquifer, the Western Interior Plains confining system, the Springfield Plateau aquifer, and the Ozark aquifer. Spatial trends in groundwater geochemistry in the Interior Highlands differ greatly from trends noted for aquifers of the Coastal Plain. In the Coastal Plain, the prevalence of long regional flow paths results in regionally predictable and mappable geochemical changes along the flow paths. In the Interior Highlands, short, topographically controlled flow paths (from hilltops to valleys) within small watersheds represent the predominant groundwater-flow system. As such, dense data coverage from numerous wells would be required to effectively characterize these groundwater basins and define small-scale geochemical changes along any given flow path for aquifers of the Interior Highlands. Changes in geochemistry generally were related to rock type and residence time along individual flow paths. Dominant changes in geochemistry for the Ouachita Mountains aquifer and the Western Interior Plains confining system are attributed to rock/water interaction and changes in redox zonation along the flow path. In these areas, groundwater evolves along flow paths from a calcium- to a sodium-bicarbonate water type with increasing reducing conditions resulting in denitrification, elevated iron and manganese concentrations, and production of methane in the more geochemically evolved and strongest reducing conditions. In the Ozark and Springfield Plateau aquifers, rapid influx of surface-derived contaminants, especially nitrogen, coupled with few to no attenuation processes was attributed to the karst landscape developed on Mississippian- and Ordovician-age carbonate rocks of the Ozark Plateaus. Increasing nitrate concentrations are related to increasing agricultural land use, and areas of mature karst development result in higher nitrate concentrations than areas with less karst features.
Suspended-sediment characteristics can be computed using acoustic indices derived from acoustic Doppler velocity meter (ADVM) backscatter data. The sediment acoustic index method applied in these types of studies can be used to more accurately and cost-effectively provide time-series estimates of suspended-sediment concentration and load, which is essential for informed solutions to many sediment-related environmental, engineering, and agricultural concerns. Advantages of this approach over other sediment surrogate methods include: (1) better representation of cross-sectional conditions from large measurement volumes, compared to other surrogate instruments that measure data at a single point; (2) high temporal resolution of collected data; (3) data integrity when biofouling is present; and (4) less rating curve hysteresis compared to streamflow as a surrogate. An additional advantage of this technique is the potential expansion of monitoring suspended-sediment concentrations at sites with existing ADVMs used in streamflow velocity monitoring. This report provides much-needed standard techniques for sediment acoustic index methods to help ensure accurate and comparable documented results. A sediment acoustic index gage is used to collect continuous acoustic backscatter data, using an ADVM deployed in a fixed location, which are related to results from discrete suspended-sediment samples. The raw ADVM backscatter data are adjusted for variables affecting backscatter other than the sediment concentration to compute the sediment-corrected backscatter ( SCB ) and sediment attenuation coefficient ( SAC ). The sediment acoustic index rating (rating) is then developed by relating the sediment characteristics from the periodic samples to the SCB and (or) SAC and other explanatory variables in a site-specific, instrument-specific, simple or multiple linear regression model. The rating is reviewed and checked to ensure the technique has been applied appropriately. This review includes an assessment of the theoretical soundness, the adequacy of the model calibration dataset, and the quality of the regression model and regression diagnostics. The rating can then be applied to the acoustic surrogates and other explanatory variables to obtain continuous records of computed suspended-sediment concentration. The estimates of suspended-sediment concentration can then be paired with streamflow data, if available, to compute continuous records of suspended-sediment load. Once developed, sediment acoustic index ratings must be validated with additional suspended-sediment samples, beyond the period of record used in the rating development, to verify that the regression model continues to adequately represent sediment conditions within the stream. Changes in ADVM configuration or installation, or replacement with another ADVM, may require development of a new rating. The best practices described in this report can be used to develop continuous estimates of suspended-sediment concentration and load using sediment acoustic surrogates to enable more informed and accurate responses to diverse sedimentation issues.
Explore the source record for details and available documents.
A groundwater catchment, located in Woodford and Jessamine Counties in the Inner Bluegrass of Kentucky, was instrumented to develop long- term flow and water quality data. The land uses on this 1 620-ha catchment consist of approximately 59% in grasses consisting of beef farms, horse farms, and a golf course; 16% row crops; 6% orchard: 13% forest; and 6% residential. Water samples were analyzed twice a week for, Ca++, Mg++, Na+, Cl-, HCO3-, O4=, NO3-, total solids, suspended solids, fecal coliforms, fecal streptococci, and triazines. Flow rate and average ambient temperature were also recorded. No strong linear relationship was developed between chemical concentrations and other parameters. The transient nature of the system was emphasized by one event that drastically deviated from others. Pesticide data were summarized and the 'flushing' phenomena accredited to karst systems was discussed. The total solids content in the spring was consistent at approximately 2.06 mg/L. Fecal bacteria contamination was well above drinking water limits (fecal coliform and fetal streptococci averages were I 700 and 4 300 colony-forming-units/100 mL, respectively) and the temporal variation in bacterial contamination was not linked to any other variable.
Tillage influences the physical and biological environment of soil. Rotation of crops with a legume affects the soil N status. A furrow irrigated site was investigated for long-term tillage and crop rotation effects on leaching of nitrate from the root zone and accumulation in the intermediate vadose zone (IVZ). The investigated tillage systems were disk-plant (DP), ridge-till (RT) and slot-plant (SP). These tillage treatments have been maintained on the Hastings silt loam (Udic Argiustoll) and Crete silt loam (Pachic Argiustoll) soils since 1976. Continuous corn (CC) and corn soybean (CS) rotations were the subtreatments. Since 1984, soybeans have been grown in CS plots in even calendar years. All tillage treatments received the same N rate. The N rate varied annually depending on the root zone residual N. Soybeans were not fertilized with N-fertilizer. Samples for residual nitrate in the root zone were taken in 8 of the 15 year study while the IVZ was only sampled at the end of the study. In seven of eight years, root zone residual soil nitrate-N levels were greater with DP than RT and SP. Residual nitrate-N amounts were similar in RT and SP in all years. Despite high residual nitrate-N with DP and the same N application rate, crop yields were higher in RT and SP except when DP had an extremely high root zone nitrate level. By applying the same N rates on all tillage treatments, DP may have been fertilized in excess of crop need. Higher residual nitrate-N in DP was most likely due to a combination of increased mineralization with tillage and lower yield compared to RT and SP. Because of higher nitrate availability with DP, the potential for nitrate leaching from the root zone was greater with DP as compared to the RT and SP tillage systems. Spring residual nitrate-N contents of DP were larger than RT and SP in both crop rotations. Ridge till and SP systems had greater nitrate-N with CS than CC rotations. Nitrate accumulation in IVZ at the upstream end of the field was twice as high with DP compared to RT and SP. At the downstream end, it was 2.4 and 1.6 times greater with DP than RT and SP, respectively. Nitrate concentration was greater in the IVZ of DP compared to RT and SP tillage systems. Nitrate accumulations in IVZ of RT and SP were not different. Continuous corn had slightly higher nitrate levels in IVZ than CS. The depth of nitrate penetration at the upstream end was greater than that of the downstream end. Estimated rates of nitrate movement ranged from 0.87 to 0.92 m yr-1 at the upstream end and 0.73 to 0.78 m yr-1 at the downstream end.
The USDA Annualized Agricultural Non-Point Source Pollution model (AnnAGNPS) has been developed to aid in evaluation of watershed response to agricultural management practices. Previous studies have demonstrated the capability of the model to simulate runoff and sediment, but not phosphorus (P). The main purpose of this article is to evaluate the performance of AnnAGNPS on P simulation using comparisons with measurements from the Deep Hollow watershed of the Mississippi Delta Management Systems Evaluation Area (MDMSEA) project. A sensitivity analysis was performed to identify input parameters whose impact is the greatest on P yields. Sensitivity analysis results indicate that the most sensitive variables of those selected are initial soil P contents, P application rate, and plant P uptake. AnnAGNPS simulations of dissolved P yield do not agree well with observed dissolved P yield (Nash-Sutcliffe coefficient of efficiency of 0.34, R2 of 0.51, and slope of 0.24); however, AnnAGNPS simulations of total P yield agree well with observed total P yield (Nash-Sutcliffe coefficient of efficiency of 0.85, R2 of 0.88, and slope of 0.83). The difference in dissolved P yield may be attributed to limitations in model simulation of P processes. Uncertainties in input parameter selections also affect the model's performance.