SEARCH · Search USGS

Results for “Computers and Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99Linked to original sources

USGS1998

Hydrogeology and simulation of ground-water flow in the Paluxy aquifer in the vicinity of Landfills 1 and 3, U.S. Air Force Plant 4, Fort Worth, Texas

Ground-water contamination of the surficial terrace alluvial aquifer has occurred at U.S. Air Force Plant 4, a government-owned, contractor-operated facility, northwest of Fort Worth, Texas. A poorly constructed monitoring well, P–22M, open to the underlying middle zone of the Paluxy aquifer was installed at landfill 3, October 1987, allowing leakage of contaminated ground water to reach the Paluxy aquifer. This well was plugged and abandoned in November 1995. Additionally, volatile organic compounds have been detected in fractures in the Goodland-Walnut confining unit, the hydrogeologic unit separating the terrace alluvial aquifer from the underlying Paluxy aquifer, beneath the western part of landfill 1. Volatile organic compounds in concentrations near the analytical detection limit were detected in the upper Paluxy prior to the drilling of well P–22M. The ground-water-flow simulation model described in this report was developed to examine the best logistically feasible location to install recovery wells to capture the low concentration (less than 100 micrograms per liter) trichloroethylene plume beneath landfills 1 and 3 (west Paluxy plume). Once the recovery wells were installed (1996), the simulation model was recalibrated with new data. This report documents the capture area of the installed recovery wells. Four geologic units are pertinent to this site-specific model. From oldest to youngest, these are the Glen Rose Formation, Paluxy Formation, Walnut Formation, and Goodland Limestone. The Glen Rose Formation is relatively impermeable in the study area and forms the confining unit underlying the Paluxy Formation. The Paluxy Formation forms the Paluxy aquifer, which is a public drinking water supply for the City of White Settlement. The Walnut Formation and Goodland Limestone form the Goodland-Walnut confining unit overlying the Paluxy aquifer. Near landfill 3, gamma-ray logs indicate three distinct zones of the Paluxy Formation; upper, middle, and lower. The formation is about 170-feet thick near landfill 3, and each zone is about 57-feet thick. Two steady-state simulations using the computer program MODFLOW were analyzed using the particle-tracking computer program, MODPATH. One simulation is the calibration simulation using Paluxy aquifer water-level data for May 1993. The second simulation includes the installed recovery wells. A variably spaced grid was designed for the model. The smallest grid cells, 25 by 25 feet, are in the vicinity of landfills 1 and 3. The largest cells, 4,864.5 by 1,441.5 feet, are at the northwestern corner of the model grid near the Parker-Tarrant County line. The modeling was accomplished with three layers representing the upper, middle, and lower zones of the Paluxy aquifer. Particles, which represent contaminant molecules moving in solution with the ground water, were tracked from well P–22M and an area below landfill 1, at the top of the upper zone of the Paluxy aquifer, for 9 years (forward tracking). The forward tracking estimates where contaminants might move by advection from 1987 to 1996. Analysis of backward tracking from the new recovery wells indicates that the simulated contributing area to the recovery wells intercepts the contaminant plume, minimizing off-site migration of the west Paluxy plume. To determine the effectiveness of the recovery wells, monitoring wells southeast of Building 14 have been installed (1996–97) for sampling.

Texas↗

USGS2009

Prominence of ichnologically influenced macroporosity in the karst Biscayne aquifer: Stratiform "super-K" zones

A combination of cyclostratigraphic, ichnologic, and borehole geophysical analyses of continuous core holes; tracer-test analyses; and lattice Boltzmann flow simulations was used to quantify biogenic macroporosity and permeability of the Biscayne aquifer, southeastern Florida. Biogenic macroporosity largely manifests as: (1) ichnogenic macroporosity primarily related to postdepositional burrowing activity by callianassid shrimp and fossilization of components of their complex burrow systems (Ophiomorpha); and (2) biomoldic macroporosity originating from dissolution of fossil hard parts, principally mollusk shells. Ophiomorpha-dominated ichno-fabric provides the greatest contribution to hydrologic characteristics in the Biscayne aquifer in a 345 km 2 study area. Stratiform tabular-shaped units of thalassinidean-associated macroporosity are commonly confined to the lower part of upward-shallowing high-frequency cycles, throughout aggradational cycles, and, in one case, they stack vertically within the lower part of a high-frequency cycle set. Broad continuity of many of the macroporous units concentrates groundwater flow in extremely permeable passage-ways, thus making the aquifer vulnerable to long-distance transport of contaminants. Ichnogenic macroporosity represents an alternative pathway for concentrated groundwater flow that differs considerably from standard karst flow-system paradigms, which describe groundwater movement through fractures and cavernous dissolution features. Permeabilities were calculated using lattice Boltzmann methods (LBMs) applied to computer renderings assembled from X-ray computed tomography scans of various biogenic macroporous limestone samples. The highest simulated LBM permeabilities were about five orders of magnitude greater than standard laboratory measurements using air-permeability methods, which are limited in their application to extremely permeable macroporous rock samples. Based on their close conformance to analytical solutions for pipe flow, LBMs offer a new means of obtaining accurate permeability values for such materials. We suggest that the stratiform ichnogenic groundwater flow zones have permeabilities even more extreme (???2-5 orders of magnitude higher) than the Jurassic "super-K" zones of the giant Ghawar oil field. The flow zones of the Pleistocene Biscayne aquifer provide examples of ichnogenic macroporosity for comparative analysis of origin and evolution in other carbonate aquifers, as well as petroleum reservoirs. ?? 2008 Geological Society of America.

Geological Society of America Bulletin↗

USGS2014

Flow monitoring along the western Tamiami Trail between County Road 92 and State Road 29 in support of the Comprehensive Everglades Restoration Plan, 2007-2010

The construction of U.S. Highway 41 (Tamiami Trail), the Southern Golden Gate Estates development, and the Barron River Canal has altered the flow of freshwater to the Ten Thousand Islands estuary of Southwest Florida. Two restoration projects, the Picayune Strand Restoration Project and the Tamiami Trail Culverts Project, both associated with the Comprehensive Everglades Restoration Plan, were initiated to address this issue. Quantifying the flow of freshwater to the estuary is essential to assessing the effectiveness of these projects. The U.S. Geological Survey conducted a study between March 2006 and September 2010 to quantify the freshwater flowing under theTamiami Trail between County Road 92 and State Road 29 in southwest Florida, excluding the Faka Union Canal (which is monitored by South Florida Water Management District). The study period was after the completion of the Tamiami Trail Culverts Project and prior to most of the construction related to the Picayune Restoration Project. The section of the Tamiami Trail that was studied contains too many structures (35 bridges and 16 culverts) to cost-effectively measure each structure on a continuous basis, so the area was divided into seven subbasins. One bridge within each of the subbasins was instrumented with an acoustic Doppler velocity meter. The index velocity method was used to compute discharge at the seven instrumented bridges. Periodic discharge measurements were made at all structures, using acoustic Doppler current profilers at bridges and acoustic Doppler velocity meters at culverts. Continuous daily mean values of discharge for the uninstrumented structures were calculated on the basis of relations between the measured discharge at the uninstrumented stations and the discharge and stage at the instrumented bridge. Estimates of daily mean discharge are available beginning in 2006 or 2007 through September 2010 for all structures. Subbasin comparison is limited to water years 2008–2010. The Faka Union Canal contributed more than half (on average 60 percent) of the flow under the Tamiami Trail between State Road 29 and County Road 92 during water years 2008–2010. During water years 2008–2010, an average 9 percent of the flow through the study area came from west of the Faka Union Canal and an average 31 percent came from east of the Faka Union Canal. Flow data provided by this study serve as baseline information about the seasonal and spatial distribution of freshwater flow under the Tamiami Trail between County Road 92 and State Road 29, and study results provide data to evaluate restoration efforts.

Florida↗

USGS2005

Comparison of methods for estimating ground-water recharge and base flow at a small watershed underlain by fractured bedrock in the Eastern United States

This study by the U.S. Geological Survey (USGS), in cooperation with the Agricultural Research Service (ARS), U.S. Department of Agriculture, compared multiple methods for estimating ground-water recharge and base flow (as a proxy for recharge) at sites in east-central Pennsylvania underlain by fractured bedrock and representative of a humid-continental climate. This study was one of several within the USGS Ground-Water Resources Program designed to provide an improved understanding of methods for estimating recharge in the eastern United States. Recharge was estimated on a monthly and annual basis using four methods?(1) unsaturated-zone drainage collected in gravity lysimeters, (2) daily water balance, (3) water-table fluctuations in wells, and (4) equations of Rorabaugh. Base flow was estimated by streamflow-hydrograph separation using the computer programs PART and HYSEP. Estimates of recharge and base flow were compared for an 8-year period (1994-2001) coinciding with operation of the gravity lysimeters at an experimental recharge site (Masser Recharge Site) and a longer 34-year period (1968-2001), for which climate and streamflow data were available on a 2.8-square-mile watershed (WE-38 watershed). Estimates of mean-annual recharge at the Masser Recharge Site and WE-38 watershed for 1994-2001 ranged from 9.9 to 14.0 inches (24 to 33 percent of precipitation). Recharge, in inches, from the various methods was: unsaturated-zone drainage, 12.2; daily water balance, 12.3; Rorabaugh equations with PULSE, 10.2, or RORA, 14.0; and water-table fluctuations, 9.9. Mean-annual base flow from streamflow-hydrograph separation ranged from 9.0 to 11.6 inches (21-28 percent of precipitation). Base flow, in inches, from the various methods was: PART, 10.7; HYSEP Local Minimum, 9.0; HYSEP Sliding Interval, 11.5; and HYSEP Fixed Interval, 11.6. Estimating recharge from multiple methods is useful, but the inherent differences of the methods must be considered when comparing results. For example, although unsaturated-zone drainage from the gravity lysimeters provided the most direct measure of potential recharge, it does not incorporate spatial variability that is contained in watershed-wide estimates of net recharge from the Rorabaugh equations or base flow from streamflow-hydrograph separation. This study showed that water-level fluctuations, in particular, should be used with caution to estimate recharge in low-storage fractured-rock aquifers because of the variability of water-level response among wells and sensitivity of recharge to small errors in estimating specific yield. To bracket the largest range of plausible recharge, results from this study indicate that recharge derived from RORA should be compared with base flow from the Local-Minimum version of HYSEP.

Scientific Investigations Report↗

USGS2025

Flood-inundation maps for 14.8 miles of Little and Big Papillion Creeks in Omaha, Nebraska, 2023

Digital flood-inundation map libraries for two reaches that constitute 14.8 miles of Little and Big Papillion Creeks in Omaha, Nebraska, were created by the U.S. Geological Survey (USGS) in cooperation with the Papio-Missouri River Natural Resource District. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at Little Papillion Creek at Irvington, Nebr. (USGS station 06610750), Little Papillion Creek at Ak-Sar-Ben at Omaha, Nebr. (USGS station 06610765), and Big Papillion Creek at Q Street at Omaha, Nebr. (USGS station 06610770) streamgages. Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System database at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service at https://water.weather.gov/ahps/ . Flood profiles were computed for two different reaches that constitute 14.8 miles of stream length in the study area by using hydraulic models. The models were calibrated by adjusting roughness coefficients to best represent the current (2022) stage-streamflow relation at the streamgages within the study reach. The hydraulic models were then used to compute water-surface profiles at 1-foot stage intervals for selected stage ranges to represent various flooding scenarios at the streamgages in each reach. The simulated water-surface profiles then were combined with a digital elevation model using a geographic information system, which had a 10-foot grid spacing to delineate the flooding extents and water depths for each stage. The availability of these flood-inundation maps, along with information regarding current stage from the USGS streamgages, can provide emergency management personnel and residents with information that is critical for flood response activities and post flood recovery efforts.

Nebraska↗

USGS1996

Simulated peak flows and water-surface profiles for Scott Creek near Sylva, North Carolina

Peak flows were simulated for Scott Creek, just upstream from Sylva, in Jackson County, North Carolina, in order to provide Jackson County officials with information that can be used to improve preparation for and response to flash floods along the reach of Scott Creek that flows through Sylva. A U.S. Geological Survey rainfall-runoff model was calibrated using observed rainfall and streamflow data collected from March 1994 through September 1995. Standard errors for calibration were 34 percent for runoff volumes and 21 percent for peak flows. The calibrated model was used to simulate peak flows resulting from syn- thetic rainfall amounts of 1.0, 2.5, 5.0, and 7.5 inches in 24-hour periods. For each rainfall amount, peak flows were simulated under low-, moderate-, and high-antecedent soil-moisture conditions, represented by selected 3-month periods of daily rainfall and evaporation record from nearby climatic-data measuring stations. Simulated peak flows ranged from 89 to 10,100 cubic feet per second. Profiles of water-surface elevations for selected observed and simu- lated peak flows were computed for the reach of Scott Creek that flows through Sylva, North Carolina. The profiles were computed using the U.S. Army Corps of Engineers HEC-2 Water Surface Profiles computer program and channel cross-section data collected by the Tennessee Valley Authority. The stage-discharge relation for Scott Creek at the simulation site has changed since the collection of the cross-section data. These changes, however, are such that the water-surface profiles presented in this report likely overestimate the true water-surface elevations at the simulation site for a given peak flow

North Carolina↗

USGS2006

Sensitivity of Earthquake Loss Estimates to Source Modeling Assumptions and Uncertainty

Introduction: This report explores how uncertainty in an earthquake source model may affect estimates of earthquake economic loss. Specifically, it focuses on the earthquake source model for the San Francisco Bay region (SFBR) created by the Working Group on California Earthquake Probabilities. The loss calculations are made using HAZUS-MH, a publicly available computer program developed by the Federal Emergency Management Agency (FEMA) for calculating future losses from earthquakes, floods and hurricanes within the United States. The database built into HAZUS-MH includes a detailed building inventory, population data, data on transportation corridors, bridges, utility lifelines, etc. Earthquake hazard in the loss calculations is based upon expected (median value) ground motion maps called ShakeMaps calculated for the scenario earthquake sources defined in WGCEP. The study considers the effect of relaxing certain assumptions in the WG02 model, and explores the effect of hypothetical reductions in epistemic uncertainty in parts of the model. For example, it addresses questions such as what would happen to the calculated loss distribution if the uncertainty in slip rate in the WG02 model were reduced (say, by obtaining additional geologic data)? What would happen if the geometry or amount of aseismic slip (creep) on the region's faults were better known? And what would be the effect on the calculated loss distribution if the time-dependent earthquake probability were better constrained, either by eliminating certain probability models or by better constraining the inherent randomness in earthquake recurrence? The study does not consider the effect of reducing uncertainty in the hazard introduced through models of attenuation and local site characteristics, although these may have a comparable or greater effect than does source-related uncertainty. Nor does it consider sources of uncertainty in the building inventory, building fragility curves, and other assumptions adopted in the loss calculations. This is a sensitivity study aimed at future regional earthquake source modelers, so that they may be informed of the effects on loss introduced by modeling assumptions and epistemic uncertainty in the WG02 earthquake source model.

Open-File Report↗

USGS1992

Hydro-climatic data network (HCDN): A U.S. Geological Survey streamflow data set for the United States for the study of climate variations, 1874-1988

Records of streamflow can provide an account of climatic variation over a hydrologic basin. The ability to do so is conditioned on the absence of confounding factors that diminish the climate signal. A national data set of streamflow records that are relatively free of confounding anthropogenic influences has been developed for the purpose of studying the variation in surface-water conditions throughout the United States. Records in the U.S. Geological Survey (USGS) National Water Storage and Retrieval System (WATSTORE) data base for active and discontinued streamflow gaging stations through water year 1988 (that is, through September 30, 1988) were reviewed jointly with data specialists in each USGS District office. The resulting collection of stations, each with its respective period of record satisfying the qualifying criteria, is called the Hydro-Climatic Data Network, or HCDN. The HCDN consists of 1,659 sites throughout the United States and its territories, totaling 73,231 water years of daily mean discharge values. For each station in the HCDN, information necessary for its identification, along with any qualifying comments about the available record and a set of descriptive watershed characteristics are provided in tabular format in this report, both on paper and on computer disk (enclosed). For each station in the HCDN, the appropriate daily mean discharge values were compiled, and statistical characteristics, including monthly mean discharges and annual mean, minimum and maximum discharges, were derived. The discharge data values are provided in a companion report.

Open-File Report↗

USGS2015

Towards automating measurements and predictions of Escherichia coli concentrations in the Cuyahoga River, Cuyahoga Valley National Park, Ohio, 2012–14

Nowcasts are systems that can provide estimates of the current bacterial water-quality conditions based on predictive models using easily-measured, explanatory variables; nowcasts can provide the public with the information to make informed decisions on the risk associated with recreational activities in natural water bodies. Previous studies on the Cuyahoga River within Cuyahoga Valley National Park (CVNP) have found that predictive models can be used to provide accurate assessments of the recreational water quality. However, in order to run the previously developed nowcasts for CVNP, manual collection and processing of samples is required on a daily basis to acquire the required explanatory variable data (laboratory-measured turbidity). The U.S. Geological Survey and the National Park Service collaborated to develop a more automated approach to provide more timely results to park visitors regarding the recreational water quality of the river. In May 2012, an in-stream water-quality sensor was installed by the U.S. Geological Survey at Jaite, Ohio (a site centrally located in CVNP on the Cuyahoga River), to provide near-real-time measurements of turbidity and water temperature. To transition from methods used during previous studies at CVNP, a relation between laboratory- and in-stream measured turbidity was developed after the recreational season of 2012. During the recreational seasons of 2012 through 2014, discrete water samples were collected and processed to determine Escherichia coli ( E. coli ) concentrations at Jaite and one site upstream of Jaite (Lock 29) within CVNP. Predictive models, using in-stream turbidity measurements, were developed for the recreational seasons of 2013 and 2014 to estimate recreational water quality in regards to Ohio’s single-sample water-quality standard for primary-contact recreation. A computer program was developed to manage the nowcasts by running the predictive models and posting the results to a publicly accessible Web site daily by 9 a.m. The nowcasts were able to correctly predict E. coli concentrations above or below the water-quality standard at Jaite for 79 percent of the samples compared with the measured concentrations. In comparison, the persistence model (using the previous day’s sample concentration) correctly predicted concentrations above or below the water-quality standard in only 68 percent of the samples. To determine if the Jaite nowcast could be used for the stretch of the river between Lock 29 and Jaite, the model predictions for Jaite were compared with the measured concentrations at Lock 29. The Jaite nowcast provided correct responses for 77 percent of the Lock 29 samples, which was a greater percentage than the percentage of correct responses (58 percent) from the persistence model at Lock 29.

Ohio↗

USGS2020

Seepage investigation of the Rio Grande from below Leasburg Dam, Leasburg, New Mexico, to above El Paso, Texas, 2018

Seepage investigations were conducted periodically by the U.S. Geological Survey (USGS) from 1988 to 1998 and from 2006 to 2015 along a 64-mile reach of the Rio Grande as part of the Mesilla Basin monitoring program. Past studies were conducted during no-flow or low-flow periods. In 2018, a seepage investigation was conducted during April 3–4 along a 62.4-mile study reach, from below Leasburg Dam, Leasburg, New Mexico, to above El Paso, Texas, during a period of high flows due to dam releases of water for irrigation purposes. During this investigation, there was measurable streamflow at 31 of the 41 measurement locations: 22 river sites, 8 inflow sites, and 1 outflow site. Results of the 2018 high-flow seepage investigation are presented in this report. Net seepage gain or loss was computed for each subreach (the interval between two adjacent measurement locations along the river) by subtracting the streamflow measured at the upstream location from the streamflow measured at the closest downstream location and then subtracting any inflow to the river within the subreach. An estimated gain or loss was determined to be meaningful if it exceeded the cumulative measurement uncertainty associated with the net seepage computation. During this investigation, streamflow on the main stem of the Rio Grande ranged from 577 to 1,000 cubic feet per second (ft 3 /s). Nine subreaches were found to have meaningful net seepage gain or loss, four gaining subreaches and five losing subreaches. Because of high cumulative uncertainty (plus or minus 111.3 ft 3 /s) relative to the calculated cumulative loss (−57.7 ft 3 /s) over the entire study reach, no meaningful gain or loss was determined in this study. Like all of the previous USGS seepage studies on this reach of the Rio Grande, this study reported a net seepage loss, and the magnitude of that loss was within the range of historical values.

Texas, New Mexico↗

USGS2020

Flood-inundation maps for the Little Calumet River from Lansing to South Holland, Illinois, 2020

Digital flood-inundation maps for about an 8-mile reach of the Little Calumet River, Illinois, were created by the U.S. Geological Survey (USGS) in cooperation with the U.S. Army Corps of Engineers. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at three USGS streamgages: Little Calumet River at South Holland, Ill. (USGS station 05536290); Little Calumet River at Munster, Indiana (USGS station 05536195); and Thorn Creek at Thornton, Ill. (USGS station 05536275). Near-real-time stages at these streamgages may be obtained on the internet from the USGS National Water Information System at https://doi.org/10.5066/F7P55KJN or the National Weather Service Advanced Hydrologic Prediction Service at https://water.weather.gov/ahps/ , which also forecasts flood hydrographs at these sites. Flood profiles were computed for the stream reaches using a one-dimensional unsteady flow step-backwater hydraulic model. The model performance was evaluated using historical streamflow measurements and the most current stage-discharge relations at the USGS streamgages at Little Calumet River at South Holland, Ill.; Little Calumet River at Munster, Ind.; and Thorn Creek at Thornton, Ill. The model was used to compute 24 water-surface profiles at 1-foot intervals referenced to the streamgage datum and ranging from bankfull to about the 0.2-percent annual-exceedance probability flood (500-year recurrence interval flood). The simulated water-surface profiles were then combined with a geographic information system digital elevation model (derived from light detection and ranging data having a 0.6-foot vertical accuracy and a 2-foot horizontal resolution) to delineate the area flooded at each water level. The availability of these maps, along with internet information regarding current stage from USGS streamgages and forecasted high-flow stages from the National Weather Service, will provide emergency management personnel and residents with information that is critical for flood-response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Illinois↗

USGS1987

Man-induced gradient adjustment of the South Fork Forked Deer River, west Tennessee

Channel modifications from 1968 to 1969 on the South Fork Forked Deer River in western Tennessee have caused upstream degradation, downstream aggradation, and bank failures along the altered channels, adjacent reaches, and tributaries. The result of these adjustments is a general decrease in gradient as the channel attempts to absorb the imposed increase in energy conditions created by channelization. Headward degradation at a rate of approximately 2.57 km/yr on the South Fork Forked Deer River caused from 1.52 m to about 3.14 m of incision over a 13.5 km reach from 1969 to 1981. As a consequence of substantially increased sediment supply, approximately 2.13 m of aggradation was induced downstream of this reach during the same period. This accumulation represents a 60% recovery of bed level at the downstream site since the completion of channel work in 1969. Gradient adjustment with time is described by exponential decay functions. The length of time required for adjustment to some new quasi-equilibrium condition is computed by these decay functions and is about 20 years from the completion of channel work. Adjusted slopes are less than predisturbed values, probably because straightened channels dissipate less energy by friction, allowing more energy for sediment transport. An equivalent sediment load, therefore, can be transported at a considerably gentler slope. The predisturbed slope exceeds the adjusted slope by an order of magnitude on the downstream reach of the South Fork Forked Deer River. ?? 1987 Springer-Verlag New York Inc.

Environmental Geology and Water Sciences↗

USGS2014

Geologic field notes and geochemical analyses of outcrop and drill core from Mesoproterozoic rocks and iron-oxide deposits and prospects of southeast Missouri

The U.S. Geological Survey, in cooperation with the Missouri Department of Natural Resources/Missouri Geological Survey, undertook a study from 1988 to 1994 on the iron-oxide deposits and their host Mesoproterozoic igneous rocks in southeastern Missouri. The project resulted in an improvement of our understanding of the geologic setting, mode of formation, and the composition of many of the known deposits and prospects and the associated rocks of the St. Francois terrane in Missouri. The goal for this earlier work was to allow the comparison of Missouri iron-oxide deposits in context with other iron oxide-copper ± uranium (IOCG) types of mineral deposits observed globally. The raw geochemical analyses were released originally through the USGS National Geochemical Database (NGDB, http://mrdata.usgs.gov). The data presented herein offers all of the field notes, locations, rock descriptions, and geochemical analyses in a coherent package to facilitate new research efforts in IOCG deposit types. The data are provided in both Microsoft Excel (Version Office 2010) spreadsheet format (*.xlsx) and MS-DOS text formats (*.txt) for ease of use by numerous computer programs.

Missouri↗

USGS1993

Estimation of peak-frequency relations, flood hydrographs, and volume-duration-frequency relations of ungaged small urban streams in Ohio

Methods are presented to estimate peak-frequency relations, flood hydrographs, and volume-duration-frequency relations of urban streams in Ohio with drainage areas less than 6.5 square miles. The methods were developed to assist planners in the design of hydraulic structures for which hydrograph routing is required or where the temporary storage of water is an important element of the design criteria. Examples of how to use the methods also are presented. The data base for the analyses consisted of 5-minute rainfall-runoff data collected for a period of 5 to 8 years at 62 small drainage basins distributed throughout Ohio. The U.S. Geological Survey rainfall-runoff model A634 was used and was calibrated for each site. The calibrayed models were used in conjunction with long-term (66-87 years) rainfall and evaporation records to synthesize a long-term series of flood-hydrograph records at each site. A method was developed and used to increase the variance of the synthetic flood characterictics in order to make them more representative of observed flood characteristics. Multiple-regression equations were developed to estimate peak discharges having recurrence intervals of 2, 5, 10, 25, 50, and 100 years. The explanatory variables in the peak-discharge equations are drainage area, average annual precipitation, and basin development factor. Average standard errors of prediction for the peak-frequency equations range from ? 34 to ? 40 percent. A method is presented to estimate flood hydrographs by applying a specific peak discharge and basin lagtime to a dimensionless hydrograph. An equation was developed to estimate basin lagtime in which main-channel length divided by the square root of the main-channel slope (L/SL) and basin-development factor are the explanatory variables and the average standard error of prediction is ? 53 percent. A dimensional hydrograph originally developed by the U.S. Geological Survey for use in Georgia was verified for use in urban areas of Ohio. Multiple-regression equations were developed to estimate maximum flood volumes of d-hour duration and T-year recurrence interval (dVT). Annual maximum flood-volume data for all combinations of six durations (1, 2, 4, 8, 16, and 32 hours) and six recurrence intervals (2, 5, 10, 25, 50, and 100 years) were analyzed. The explanatory variables in the resulting 36 volume-duration-frequency equations are drainage area, average annual precipitation, and basin-development-factor. Average standard errors of prediction for the 36 dVT equations range from ? 28 percent to ? percent. Step-by-step examples show how to estimate (1) peak discharges for selected recurrence intervals, (2) flood hydrographs and compute their volumes, and (3) volume-duration-frequency relations of small ungaged urban streams in Ohio. Volumes estimated by use of the volume-duration-frequency equations were compared with volumes estimated by integrating under an estimated under an estimated hydrograph. Both methods yield similar results for volume estimates of short duration, which are applicable to convective-type storm runoff. The volume-duration-frequency equations can be used to compute volume estimates of long and short duration because to equations are based on maximum-annual-volume data of long and short duration. The dimensionless-hydrograph method is based on flood hydrographs of average duration and cannot be used to compute volume estimates of long duration. Volume estimates of long duration may be considerably greater than volume estimates of short duration and are applicable to runoff from frontal-type storms.

Open-File Report↗

USGS2009

Web GIS in practice VII: stereoscopic 3-D solutions for online maps and virtual globes

Because our pupils are about 6.5 cm apart, each eye views a scene from a different angle and sends a unique image to the visual cortex, which then merges the images from both eyes into a single picture. The slight difference between the right and left images allows the brain to properly perceive the 'third dimension' or depth in a scene (stereopsis). However, when a person views a conventional 2-D (two-dimensional) image representation of a 3-D (three-dimensional) scene on a conventional computer screen, each eye receives essentially the same information. Depth in such cases can only be approximately inferred from visual clues in the image, such as perspective, as only one image is offered to both eyes. The goal of stereoscopic 3-D displays is to project a slightly different image into each eye to achieve a much truer and realistic perception of depth, of different scene planes, and of object relief. This paper presents a brief review of a number of stereoscopic 3-D hardware and software solutions for creating and displaying online maps and virtual globes (such as Google Earth) in "true 3D", with costs ranging from almost free to multi-thousand pounds sterling. A practical account is also given of the experience of the USGS BRD UMESC (United States Geological Survey's Biological Resources Division, Upper Midwest Environmental Sciences Center) in setting up a low-cost, full-colour stereoscopic 3-D system.

International Journal of Health Geographics↗

USGS2005

Historical development of the gravity method in exploration

The gravity method was the first geophysical technique to be used in oil and gas exploration. Despite being eclipsed by seismology, it has continued to be an important and sometimes crucial constraint in a number of exploration areas. In oil exploration the gravity method is particularly applicable in salt provinces, overthrust and foothills belts, underexplored basins, and targets of interest that underlie high-velocity zones. The gravity method is used frequently in mining applications to map subsurface geology and to directly calculate ore reserves for some massive sulfide orebodies. There is also a modest increase in the use of gravity techniques in specialized investigations for shallow targets. Gravimeters have undergone continuous improvement during the past 25 years, particularly in their ability to function in a dynamic environment. This and the advent of global positioning systems (GPS) have led to a marked improvement in the quality of marine gravity and have transformed airborne gravity from a regional technique to a prospect-level exploration tool that is particularly applicable in remote areas or transition zones that are otherwise inaccessible. Recently, moving-platform gravity gradiometers have become available and promise to play an important role in future exploration. Data reduction, filtering, and visualization, together with low-cost, powerful personal computers and color graphics, have transformed the interpretation of gravity data. The state of the art is illustrated with three case histories: 3D modeling of gravity data to map aquifers in the Albuquerque Basin, the use of marine gravity gradiometry combined with 3D seismic data to map salt keels in the Gulf of Mexico, and the use of airborne gravity gradiometry in exploration for kimberlites in Canada.

Geophysics↗

USGS2005

Porphyry copper deposits of the world: database, map, and grade and tonnage models

Mineral deposit models are important in exploration planning and quantitative resource assessments for two reasons: (1) grades and tonnages among deposit types are significantly different, and (2) many types occur in different geologic settings that can be identified from geologic maps. Mineral deposit models are the keystone in combining the diverse geoscience information on geology, mineral occurrences, geophysics, and geochemistry used in resource assessments and mineral exploration. Too few thoroughly explored mineral deposits are available in most local areas for reliable identification of the important geoscience variables or for robust estimation of undiscovered deposits-thus we need mineral-deposit models. Globally based deposit models allow recognition of important features because the global models demonstrate how common different features are. Well-designed and -constructed deposit models allow geologists to know from observed geologic environments the possible mineral deposit types that might exist, and allow economists to determine the possible economic viability of these resources in the region. Thus, mineral deposit models play the central role in transforming geoscience information to a form useful to policy makers. The foundation of mineral deposit models is information about known deposits-the purpose of this publication is to make this kind of information available in digital form for porphyry copper deposits. This report is an update of an earlier publication about porphyry copper deposits. In this report we have added 84 new porphyry copper deposits and removed 12 deposits. In addition, some errors have been corrected and a number of deposits have had some information, such as grades, tonnages, locations, or ages revised. This publication contains a computer file of information on porphyry copper deposits from around the world. It also presents new grade and tonnage models for porphyry copper deposits and for three subtypes of porphyry copper deposits and a map showing the location of all deposits. The value of this information and any derived analyses depends critically on the consistent manner of data gathering. For this reason, we first discuss the rules used in this compilation. Next, the fields of the data file are considered. Finally, we provide new grade and tonnage models.

Open-File Report↗

USGS2006

Bathymetric contour maps of lakes surveyed in Iowa in 2004

The U.S. Geological Survey, in cooperation with the Iowa Department of Natural Resources, conducted bathymetric surveys on six lakes in Iowa during 2004 (Lake Darling, Littlefield Lake, Lake Minnewashta, Nine Eagles Lake, Prairie Rose Lake, and Upper Gar Lake). The surveys were conducted to provide the Iowa Department of Natural Resources with information for the development of total maximum daily load limits, particularly for estimating sediment load and deposition rates. The bathymetric surveys can provide a baseline for future work on sediment loads and deposition rates for these lakes. Two of the lakes surveyed in 2004, Lake Minnewashta and Upper Gar Lake, are natural lakes. The other four lakes are manmade lakes with fixed spillways. Bathymetric data were collected using a boat-mounted, differential global positioning system, echo depth-sounding equipment, and computer software. Data were processed with commercial hydrographic software and exported into a geographic information system for mapping and calculating area and volume. Lake volume estimates ranged from 83,924,000 cubic feet (1,930 acre-feet) at Lake Darling to 5,967,000 cubic feet (140 acre-feet) at Upper Gar Lake. Surface area estimates ranged from 10,660,000 square feet (240 acres) at Lake Darling to 1,557,000 square feet (36 acres) at Upper Gar Lake.

Iowa↗