Search USGS⌕ Search

SEARCH · Search USGS

Results for “Water Resources Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97Linked to original sources
USGS2010

EAARL Coastal Topography-Eastern Louisiana Barrier Islands, Post-Hurricane Gustav, 2008: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the eastern Louisiana barrier islands, acquired post-Hurricane Gustav (September 2008 hurricane) on September 6 and 7, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2010

EAARL Coastal Topography-Eastern Florida, Post-Hurricane Jeanne, 2004: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the eastern Florida coastline beachface, acquired post-Hurricane Jeanne (September 2004 hurricane) on October 1, 2004. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2010

EAARL Coastal Topography-Maryland and Delaware, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL. This project provides highly detailed and accurate datasets of a portion of the eastern Maryland and Delaware coastline beachface, acquired post-Nor'Ida (November 2009 nor'easter) on November 28 and 30, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2010

EAARL coastal topography-Cape Hatteras National Seashore, North Carolina, post-Nor'Ida, 2009: first surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the National Park Service Southeast Coast Network's Cape Hatteras National Seashore in North Carolina, acquired post-Nor'Ida (November 2009 nor'easter) on November 27 and 29 and December 1, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2010

EAARL coastal topography and imagery-Fire Island National Seashore, New York, 2009

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Fire Island National Seashore in New York, acquired on July 9 and August 3, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral CIR camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2011

EAARL Coastal Topography-Cape Hatteras National Seashore, North Carolina, Post-Nor'Ida, 2009: Bare Earth

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the National Park Service Southeast Coast Network's Cape Hatteras National Seashore in North Carolina, acquired post-Nor'Ida (November 2009 nor'easter) on November 27 and 29 and December 1, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗
USGS2011

EAARL Coastal Topography--Cape Canaveral, Florida, 2009: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Kennedy Space Center, FL. This project provides highly detailed and accurate datasets of a portion of the eastern Florida coastline beachface, acquired on May 28, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations.

Data Series↗
USGS2002

Occurrence and status of volatile organic compounds in ground water from rural, untreated, self-supplied domestic wells in the United States, 1986-99

Samples of untreated ground water from 1,926 rural, self-supplied domestic wells were analyzed for volatile organic compounds (VOCs) during 1986-99. This information was used to characterize the occurrence and status of VOCs in domestic well water. The samples were either collected as part of the U.S. Geological Survey?s National Water-Quality Assessment (NAWQA) Program occurrence-assessment studies or were compiled by NAWQA from existing ambient ground-water or source-water-quality monitoring programs conducted by local, State, and other Federal agencies. Water samples were collected at the wellhead prior to treatment or storage. In most samples, 55 target VOCs were analyzed, and occurrence and status information generally was computed at an assessment level of 0.2 mg/L (microgram per liter). At least one VOC was detected in 12 percent of samples (232 samples) at an assessment level of 0.2 mg/L. This detection frequency is relatively low compared to the 26 percent detection frequency of at least one VOC in public sup-ply wells sampled by NAWQA, and the difference may be due, in part, to the higher pumping rates, pumping stress factors, and larger contributing areas of public supply wells. Samples with detections of at least one VOC were collected from wells located in 31 of 39 States. Solvents were the most frequently detected VOC group with detections in 4.6 percent of samples (89 samples) at an assessment level of 0.2 mg/L. The geographic distribution of detections of some VOC groups, such as fumigants and oxygenates, relates to the use pattern of com-pounds in that group. With the exception of com-pounds used in organic synthesis, detection frequencies of VOCs by group are proportional to the average half-life of compounds in the group. When the organic synthesis group is excluded from the analysis, a good correlation exists between the detection frequency of VOCs by group and average half-life of compounds in the group. Individually, VOCs were not commonly detected at an assessment level of 0.2 mg/L, with the seven most frequently detected VOCs found in only 1 to 5 percent of samples. Mixtures (two or more compounds) were a common mode of occurrence for VOCs when no assessment level was applied, and mixtures occurred in one-half of all samples that contained at least one VOC. Only 1.4 percent of samples (27 samples) had one or more VOC concentrations that exceeded a federally established drinking-water standard or health criterion. Only 0.1 percent of samples (2 samples) had one or more VOC concentrations that exceeded a taste/odor threshold. Potential point sources of VOCs near domestic wells are numerous. Leaks from under-ground storage tanks and aboveground storage tanks that hold gasoline, diesel fuel, or heating oil have the potential to be major point sources of contaminants to domestic wells. Shock chlorination may be a source of trichloromethane and other trihalomethanes in some domestic wells. Septic systems are believed to be an important source of contaminants to domestic wells, but extensive research on this subject does not exist. VOCs frequently are ingredients in household products such as cleansers and insecticides, and some VOCs have been found in septic systems.

Water-Resources Investigations Report↗
USGS1974

EROS: A space program for Earth resources

The EROS Program, administered by the U. S. Geological Survey, works with representatives of departmental bureaus and offices to coordinate research and application of remote-sensing technology to the day to-day operations of the department. Most of the research and applications have been made possible by the experimental data acquisition systems of the National Aeronautics and Space Administration (NASA). In particular, the EROS Program uses data from the Earth Resources Technology Satellite (ERTS), from the Earth Resources Experiment Package (EREP) of Skylab, and from NASA's Aircraft Program.

General Information Product↗
USGS1976

Availability of Earth resources data

The purpose of this booklet is to help the reader to become aware of the volume of Earth resources data that have been collected by agencies of the United States Government and to find out where and how these data may be obtained. Earth resources data as discussed here are those obtained by remote-sensing instruments, including aerial cameras, multispectral cameras, multispectral scanners, and radar. They are obtained by spacecraft and high-altitude aircraft. Also, various agencies have been acquiring vast quantities of conventional aerial mapping photography from low and medium altitudes for more than 50 years. There is also brief information to assist the reader in locating published references and identifying research projects relating to application of Earth resources data to a variety of purposes. In all cases, it is not the intent to say what data are needed or how the data are to be used, but to describe where an interested person can begin to locate Earth resources data.

General Information Product↗
USGS2024

The use of conceptual ecological models to identify critical data and uncertainties to support numerical modeling: The northern Gulf of Mexico eastern oyster Crassostrea virginica example

Objective Increasing reliance on numerical simulation models to help inform management and restoration choices benefits from careful consideration of critical early steps in model development. Along the northern coast of the Gulf of Mexico, the eastern oyster Crassostrea virginica fulfills important ecological and economic roles. Using the eastern oyster as an example, we draw on several recent frameworks outlining best practices for model development and application for restoration, conservation, and management. Methods We identify priority model questions, outline a conceptual ecological model (CEM) to guide numerical model development, and use this framework to identify uncertainties and research needs. Result The CEM uses a nested design, identifying explicit vital rates, processes, attributes, and outcomes for the species (oysters), population, and metapopulation (i.e., network of populations) levels in response to drivers of species, population, and metapopulation changes and changing environmental factors. Most management actions related to oyster restoration and harvest affect population attributes directly, but many coastal management actions and changes (i.e., climate change and coastal and water resource engineering) impact environmental factors that alter vital rates and attributes of oysters, populations, and metapopulations. Conclusion Investment in studies targeting individual oyster‐ and population‐level multi‐stressor responses (filtration, respiration, growth, and reproduction) and improving hydrodynamic and environmental models targeting drivers that influence metapopulation vital rates and attributes (i.e., connectivity and substrate persistence) would contribute to reducing uncertainties. Development of numerical models covering the entire oyster life cycle and connectivity of populations using hydrodynamic models of current and predicted conditions to provide key abiotic and biotic factors influencing larval movement, recruitment, and on‐reef oyster vital rates would assist in balancing the goals of conservation, restoration, and fisheries management of this foundational estuarine species.

Marine and Coastal Fisheries: Dynamics, Management↗
USGS2024

Using citizen scientists to collect oxygen and hydrogen isotope data in southern Nevada

What is Citizen Science? Citizen science programs provide a means for Federal and non-Federal government agencies to make science more engaging, transparent, and accessible by partnering with the public for the purpose of problem solving, data collection, and monitoring. Public volunteers become directly involved in local research, thereby engaging in scientific projects. The public has already been included in existing citizen science programs that cover a broad range of disciplines, such as ecology, hydrology, and tectonics. Citizen science advances research while simultaneously fostering a sense of involvement and interest from the public. Beginning in 2017, the U.S. Geological Survey (USGS), U.S. Forest Service, Bureau of Land Management, U.S. Fish and Wildlife Service, and National Park Service collaborated with private, non-profit partners to inventory, survey, and rehabilitate springs in Clark County, Nevada. The USGS maintains the National Water Information System (NWIS), a publicly available online database of water-resources data for the Nation, and the agency is interested in using citizen science to add geochemical data from springs in southern Nevada. From 2021 to 2023, the USGS directly worked with citizen science partners, including the Springs Stewardship Institute and the Friends of Nevada Wilderness, to collect stable isotope and tritium samples from southern Nevada springs. The citizen science volunteers were provided the training and supplies for proper sample collection by USGS staff. As the citizen science partners traveled and hiked to the remote spring sites to complete spring surveys and perform restoration activities, they collected stable isotope and tritium samples for the USGS. Samples were shipped to national USGS laboratories for analysis, and the results were uploaded to the NWIS database (U.S. Geological Survey, 2024).

Nevada↗
USGS2001

Land use change and effects on water quality and ecosystem health in the Lake Tahoe basin, Nevada and California

Human activity in the Lake Tahoe Basin has increased substantially in the past four decades, causing significant impacts on the quality and clarity of the lake's famous deep, clear water. Protection of Lake Tahoe and the surrounding environment has become an important activity in recent years. A variety of agencies, including the Tahoe Regional Planning Agency, Tahoe Research Group of the University of California at Davis, Desert Research Institute of the University and Community College System of Nevada, U.S. Geological Survey (USGS), and a host of State (both Nevada and California) and local agencies have been monitoring and conducting research in the Basin in order to understand how the lake functions and to what extent humans have affected its landscape and ecosystem processes. In spite of all of these activities, there remains a lack of comprehensive land use change data and analysis for the Basin. A project is underway that unites the land cover mapping expertise of the USGS National Mapping Discipline with the hydrologic expertise of the Water Resources Discipline to assess the impacts of urban growth and land use change in the Lake Tahoe Basin. Three activities are planned over the next 3 years: (1) mapping the current and historic state of the land surface, (2) conducting analysis to document patterns, rates, and trends in urbanization, land use change, and ecosystem health, and (3) assessing the causes and consequences of land use change with regard to water quality and ecosystem health. We hypothesize that changes in the extent of urban growth and the corresponding increases in impervious surfaces and decreases in natural vegetation have resulted in severe impacts on ecosystem health and integrity, riparian zones and water quality over time. We are acting on multiple fronts to test this hypothesis through the quantification of landscape disturbances and impacts.

California, Nevada↗
USGS1989

100 years of sedimentation study by the USGS

On January 15, 1889, the U.S. Geological Survey began collecting sediment data on the Rio Grande at Embudo, New Mexico. During the past 100 years the U.S. Geological Survey's Water Resources Division (WRD) has collected daily sediment data at more than 1,200 sites. Projects have addressed the problems associated with reservoir construction, agricultural irrigation projects, energy production, and transport and deposition of pollutants sorbed to sediments. The Survey has been active as a charter member of the Federal Interagency Sediment Project and currently has three full-time hydrologists working on the project. The WRD's sediment-research projects have covered a wide variety of subjects from the fundamental theories of resistance to flow and sediment transport in alluvial channels to lunar erosion mechanisms.

Conference Paper↗
USGS1988

The ecology of the soft-bottom benthos of San Francisco Bay: a community profile

This profile, part of a series of profiles concerning coastal habitats of the United States, is a detailed examination of the soft-bottom benthos of San Francisco Bay. A U.S. Fish and Wildlife Service and California Department of Fish and Game report (1979) entitled "Protection and Restoration of San Francisco Bay Fish and Wildlife Habitat" provides clear recognition of the importance of intertidal and subtidal soft-bottom habitats and their associated organisms to the bay's birds and fishes and to the overall functioning of the estuary. The purpose of this profile is to provide a description of the structure and functioning of the benthic community in San Francisco Bay (exclusive of its tidal marshes, which are discussed by M. Josselyn [1983] in another profile). The habitats covered in this volume include all nonvegetated soft-bottom intertidal and subtidal areas of the bay between the Golden Gate and the mouths of the Sacramento and San Joaquin Rivers to the northeast, and to the southern extremity of the bay. The profile provides a reference to the scientific information concerning the animals and plants of the bay's benthic communities, their importance to the bay ecosystem, and their value as a resource measured in human terms. Because there have been few process-oriented studies of the benthos of San Francisco Bay (e.g., field and laboratory rate-measurement experiments), the material presented herein is largely descriptive. Nonetheless, we have described the processes that interconnect the various physical, chemical, and biological components of the benthic environment, and the important couplings between this environment and the water column above, with reference to research results from other estuaries where necessary. We consider the role of the benthic community as a food source for fish, aquatic birds, and humans; as a consumer or degrader of organic materials including wastes; as a recycler of minerals and nutrients; and as an accumulator of pollutants.

California↗
USGS2009

Science-Based Strategies for Sustaining Coral Ecosystems

Coral ecosystems and their natural capital are at risk. Greenhouse gas emissions, overfishing, and harmful land-use practices are damaging our coral reefs. Overwhelming scientific evidence indicates that the threats are serious, and if they are left unchecked, the ecological and social consequences will be significant and widespread. Although the primary stressors to coral ecosystems are known, science-based strategies are needed to more accurately explain natural processes and forecast human-induced change. Collaborations among managers and scientists and enhanced mapping, monitoring, research, and modeling can lead to effective mitigation plans. U.S. Geological Survey scientists and their partners assess coral ecosystem history, ecology, vulnerability, and resiliency and provide study results to decisionmakers who may devise policies to sustain coral resources and the essential goods and services they provide.

Fact Sheet↗
USGS2017

Land change monitoring, assessment, and projection (LCMAP) revolutionizes land cover and land change research

When nature and humanity change Earth’s landscapes - through flood or fire, public policy, natural resources management, or economic development - the results are often dramatic and lasting. Wildfires can reshape ecosystems. Hurricanes with names like Sandy or Katrina will howl for days while altering the landscape for years. One growing season in the evolution of drought-resistant genetics can transform semiarid landscapes into farm fields. In the past, valuable land cover maps created for understanding the effects of those events - whether changes in wildlife habitat, water-quality impacts, or the role land use and land cover play in affecting weather and climate - came out at best every 5 to 7 years. Those high quality, high resolution maps were good, but users always craved more: even higher quality data, additional land cover and land change variables, more detailed legends, and most importantly, more frequent land change information. Now a bold new initiative called Land Change Monitoring, Assessment, and Projection (LCMAP) promises to fulfill that demand. Developed at the U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center in Sioux Falls, South Dakota, LCMAP provides definitive, timely information on how, why, and where the planet is changing. LCMAP’s continuous monitoring process can detect changes as they happen every day that Landsat satellites acquire clear observations. The result will be to place near real-time information in the hands of land and resource managers who need to understand the effects these changes have on landscapes.

General Information Product↗
USGS2016

A review and synthesis of recreation ecology research findings on visitor impacts to wilderness and protected natural areas

The 50th anniversary of the US Wilderness Act of 1964 presents a worthy opportunity to review our collective knowledge on how recreation visitation affects wilderness and protected natural area resources. Studies of recreation impacts, examined within the recreation ecology field of study, have spanned 80 years and generated more than 1,200 citations. This article examines the recreation ecology literature most relevant to wilderness and backcountry, with a focus on visitor impacts to vegetation, soil, wildlife, and water resources. We also review relationships with influential factors, such as the amount of use, visitor behavior, and vegetation type. An understanding of these impacts and their relationships with influential factors is necessary for land managers seeking to identify acceptable limits of impact or selecting management actions that will effectively avoid or minimize resource impacts.

Journal of Forestry↗