Search USGS⌕ Search

SEARCH · Search USGS

Results for “Data Series”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94Linked to original sources
USGS1999

The influence of sampling interval on the accuracy of trail impact assessment

Trail impact assessment and monitoring (IA&M) programs have been growing in importance and application in recreation resource management at protected areas. Census-based and sampling-based approaches have been developed in such programs, with systematic point sampling being the most common survey design. This paper examines the influence of sampling interval on the accuracy of estimates for selected trail impact problems. A complete census of four impact types on 70 trails in Great Smoky Mountains National Park was utilized as the base data set for the analyses. The census data were resampled at increasing intervals to create a series of simulated point data sets. Estimates of frequency of occurrence and lineal extent for the four impact types were compared with the census data set. The responses of accuracy loss on lineal extent estimates to increasing sampling intervals varied across different impact types, while the responses on frequency of occurrence estimates were consistent, approximating an inverse asymptotic curve. These findings suggest that systematic point sampling may be an appropriate method for estimating the lineal extent but not the frequency of trail impacts. Sample intervals of less than 100 m appear to yield an excellent level of accuracy for the four impact types evaluated. Multiple regression analysis results suggest that appropriate sampling intervals are more likely to be determined by the type of impact in question rather than the length of trail. The census-based trail survey and the resampling-simulation method developed in this study can be a valuable first step in establishing long-term trail IA&M programs, in which an optimal sampling interval range with acceptable accuracy is determined before investing efforts in data collection.

Landscape and Urban Planning↗
USGS1996

Water-quality, streamflow, and meteorological data for the Tualatin River Basin, Oregon, 1991-93

Surface-water-quality data, ground-water-quality data, streamflow data, field measurements, aquatic-biology data, meteorological data, and quality-assurance data were collected in the Tualatin River Basin from 1991 to 1993 by the U.S. Geological Survey (USGS) and the Unified Sewerage Agency of Washington County, Oregon (USA). The data from that study, which are part of this report, are presented in American Standard Code for Information Interchange (ASCII) format in subject-specific data files on a Compact Disk-Read Only Memory (CD-ROM). The text of this report describes the objectives of the study, the location of sampling sites, sample-collection and processing techniques, equipment used, laboratory analytical methods, and quality-assurance procedures. The data files on CD-ROM contain the analytical results of water samples collected in the Tualatin River Basin, streamflow measurements of the main-stem Tualatin River and its major tributaries, flow data from the USA wastewater-treatment plants, flow data from stations that divert water from the main-stem Tualatin River, aquatic-biology data, and meteorological data from the Tualatin Valley Irrigation District (TVID) Agrimet Weather Station located in Verboort, Oregon. Specific information regarding the contents of each data file is given in the text. The data files use a series of letter codes that distinguish each line of data. These codes are defined in data tables accompanying the text. Presenting data on CD-ROM offers several advantages: (1) the data can be accessed easily and manipulated by computers, (2) the data can be distributed readily over computer networks, and (3) the data may be more easily transported and stored than a large printed report. These data have been used by the USGS to (1) identify the sources, transport, and fate of nutrients in the Tualatin River Basin, (2) quantify relations among nutrient loads, algal growth, low dissolved-oxygen concentrations, and high pH, and (3) develop and calibrate a water- quality model that allows managers to test options for alleviating water-quality problems.

Oregon↗
USGS2018

Modeling resource selection of bobcats (Lynx rufus) and vertebrate species distributions in Orange County, southern California

For nature reserves in urban settings, wildlife and wildlife habitats may be affected by recreational activities and intensive, adjacent development. Sustaining biodiversity in such reserves is a challenge for land and natural resource managers, but identification of core areas and key resources for wildlife species may help in planning for current and emerging threats. To help identify core areas and resources, we conducted spatial analyses and predictive modeling of vertebrate distributions for a network of nature reserves in densely populated Orange County, California. We primarily focused on bobcats ( Lynx rufus ), a species with a strong association with natural habitat. Bobcat space use has been correlated with broad, simple land-use categories, but relatively little is known about the influence of greater landscape complexity on habitat suitability for bobcats. To examine habitat selection by bobcats, we developed spatial data layers representing environmental factors that might influence this species, and we used previously collected Global Positioning System tracking data for 30 male and 21 female bobcats to indicate bobcat response to complex landscape factors. We examined these inputs using Resource Selection Function (RSF) modeling and developed spatially explicit models of the probability of bobcat use (selection or avoidance) of landscape characteristics. RSF models highlighted the general importance of reserve habitat for bobcats, but suggested that female bobcats were more dependent that male bobcats on habitat within designated reserves. Male bobcats, which range more widely than female bobcats, were associated with undeveloped areas both within and outside reserves. Small areas were present outside reserves that seemed to provide additional suitable habitat or movement areas for bobcats, potentially through restoration, connectivity, or reduced edge effects. Although bobcat RSFs suggested areas of high value to this species and potentially other species, taxa can differ greatly in their resource-selection and spatial requirements. Thus, for several species of reptiles, amphibians, and birds, we adapted species distribution models based on occurrence data to examine the response of other vertebrates to the landscape. To identify potential High-Value Areas (HVAs) for single or multiple species, we then developed a step-wise filtering process that can be applied to a series of spatial data layers. We provide examples of alternative decision models for HVAs that capture different elements of biodiversity and a range of management considerations. As landscape and management challenges change, these spatial layers and decision rules can be adjusted based on new information. Our approach thus establishes a general framework for identifying high-value habitat that can be used for current management decisions and refined in the future, depending on management interests and goals and the availability of suitable quality data or adequate surrogate information.

California↗
USGS2017

PRISM software—Processing and review interface for strong-motion data

Rapidly available and accurate ground-motion acceleration time series (seismic recordings) and derived data products are essential to quickly providing scientific and engineering analysis and advice after an earthquake. To meet this need, the U.S. Geological Survey National Strong Motion Project has developed a software package called PRISM (Processing and Review Interface for Strong-Motion data). PRISM automatically processes strong-motion acceleration records, producing compatible acceleration, velocity, and displacement time series; acceleration, velocity, and displacement response spectra; Fourier amplitude spectra; and standard earthquake-intensity measures. PRISM is intended to be used by strong-motion seismic networks, as well as by earthquake engineers and seismologists.

Techniques and Methods↗
USGS1999

Specific conductance, water temperature, and water level data, San Francisco Bay, California, water year 1998

Specific conductance and water temperature data are continuously recorded at four sites in San Francisco Bay, California: San Pablo Strait at Point San Pablo, Central San Francisco Bay at Presidio Military Reservation, Pier 24 at Bay Bridge, and South San Francisco Bay at San Mateo Bridge near Foster City (Figure 1). Water level data are recorded only at San Pablo Strait at Point San Pablo. These data were recorded by the Department of Water Resources (DWR) before 1988, by the US Geological Survey (USGS) National Research Program from 1988 to 1989, and by the USGS-DWR cooperative program since 1990. This article presents time-series plots of data from the four sites in San Francisco Bay during water year 1998 (1 October 1997 through 30 September 1998).

California↗
USGS2023

Seismic source characterization in central and eastern United States

This report documents earthquake geology studies conducted in the central and eastern United States (CEUS) between 2018 and 2023. The overarching goal of the earthquake geology studies was to identify and characterize fault sources in the New Madrid seismic zone, the eastern Tennessee seismic zone, and the Charleston seismic zone. These studies primarily relied on the interpretation of high-resolution topography, morphotectonic analysis of 10-meter (m) digital elevation models, field reconnaissance, and integration with new and existing subsurface datasets. Results from each study are placed into a seismic hazard framework. The first two chapters focus on the New Madrid seismic zone, which is the most seismically active region in the CEUS, to better characterize the southern extent of the Reelfoot fault in the Obion River valley, and identify and characterize proposed faults along the margins of Crowleys Ridge in the center of the Mississippi River embayment. Crowleys Ridge is a ~320-kilometer (km) long landform that has been proposed to be formed by intermittent faulting or erosion from the Mississippi River. Legacy seismic reflection data documented Eocene, Mesozoic, and older strata offset by faults on the margins of the ridge (Van Arsdale et al., 1999). A morphotectonic analysis of the topography along Crowleys Ridge indicated southward increases in catchment hypsometric integral and slope. Neotectonic mapping on high-resolution lidar data revealed a series of subparallel linear fault and fold scarps along the margins of Crowleys Ridge. These scarps offset previously mapped fluvial and alluvial surfaces that were <56 thousand years ago (ka) (Rittenour et al., 2007). Integration of new seismic reflection and airborne electromagnetic data, legacy seismic data, with the landscape morphotectonic analysis and neotectonic mapping supports the interpretation that Crowleys Ridge is bound by faults that have been active in the late Quaternary but do not experience modern seismicity. By placing these newly characterized faults into the regional framework, the Crowleys Ridge faults can be interpreted as thrust faults associated with stepovers in the overall dextral fault system, similar to the Reelfoot fault. The results of these studies indicate that seismicity has migrated eastward during the late Quaternary, with the Reelfoot fault accommodating much of the modern-day strain. The Reelfoot fault ruptured in the 1811-1812 New Madrid earthquake sequence (Fuller, 1912) and has a record of past large earthquakes (Tuttle et al., 2002; 2019). Whereas the northern extent of the fault intersects the Mississippi River and has well-expressed surface deformation, questions remained regarding the southern limit of seismicity, deformation, and overall fault length. Analysis of <25 ka river terraces along the Obion River valley in western Tennessee revealed subtle fold scarps, with increased magnitudes of deformation on progressively older terraces, indicative of a longer record of fault movement than has been documented by paleoseismic and paleoliquefaction studies alone (e.g., Kelson et al., 1996; Gold et al., 2019; Tuttle et al., 2019). The third chapter integrates surface and subsurface data to assess the landscape record of surface deformation in the eastern Tennessee seismic zone (ETSZ), which is the second most seismically active region in the CEUS. Seismicity in the ETSZ is deep (5-26 km) and focused in the Proterozoic rock below the Paleozoic detachment. Although the region has experienced moderate (≤ Mw 4.8) seismicity in the instrumental record, the lack of a large historical earthquake and limited paleoseismic and paleoliquefaction evidence of prehistoric large ground shaking events have made seismic hazard characterization of the region challenging. Two models have emerged to predict the style and orientation of active surface deformation in the ETSZ. One suggests that surface rupturing earthquakes would exploit pre-existing faults along the regional structural grain (Cox et al., 2022). The second model advocates for primarily strike-slip motion on east-west or north-south faults, following analyses of recent seismicity (Chapman et al., 1997; Dunn and Chapman, 2006; Daniels and Peng, 2022) and the modern stress field (Levandowski et al., 2018). In our analysis, neotectonic mapping of high-resolution lidar data reveals a concentration of lineaments with east-west orientations, with some corresponding to previously mapped east-west faults that crosscut the northeast-southwest regional structural grain from the Paleozoic orogeny. A morphotectonic analysis of catchments and river segments within the same lithology indicates subtle differences that may be indicative of a longer-term tectonic uplift signal. These changes in morphotectonic metrics spatially correspond to newly mapped lineaments and previously mapped east-west trending faults. Within a regional framework, we suggest that diffuse surface deformation associated with deep seismicity is accommodated on a network on east-west faults. However, further work is needed to better understand the potential late Pleistocene fault activity of these lineaments, and we propose that the ETSZ is still best characterized as an area source in seismic hazard models. The final chapter presents preliminary work to create a geographic information system (GIS) database of recent studies analyzing surface and subsurface datasets and interpretations in the Charleston seismic zone, South Carolina. This GIS database will serve as a foundation for future work to analyze new quality level 1 (QL1; <0.5 m resolution) lidar data over the 1886 magnitude (M) 7 Charleston epicentral region to identify possible fault source sources responsible for the 1886 or other surface-rupturing events. This chapter briefly summarizes three new subsurface datasets, including seismic reflection (Pratt et al., 2022; Liberty, 2022) and seismicity data (Chapman et al., 2016), and one new surface dataset (Marple and Hurd, 2020), and their interpretations of potentially active lineaments and faults in the region.

central and eastern United States↗
USGS1999

Complex effusive events at Kilauea as documented by the GOES satellite and remote video cameras

GOES provides thermal data for all of the Hawaiian volcanoes once every 15 min. We show how volcanic radiance time series produced from this data stream can be used as a simple measure of effusive activity. Two types of radiance trends in these time series can be used to monitor effusive activity: (a) Gradual variations in radiance reveal steady flow-field extension and tube development. (b) Discrete spikes correlate with short bursts of activity, such as lava fountaining or lava-lake overflows. We are confident that any effusive event covering more than 10,000 m2 of ground in less than 60 min will be unambiguously detectable using this approach. We demonstrate this capability using GOES, video camera and ground-based observational data for the current eruption of Kilauea volcano (Hawai'i). A GOES radiance time series was constructed from 3987 images between 19 June and 12 August 1997. This time series displayed 24 radiance spikes elevated more than two standard deviations above the mean; 19 of these are correlated with video-recorded short-burst effusive events. Less ambiguous events are interpreted, assessed and related to specific volcanic events by simultaneous use of permanently recording video camera data and ground-observer reports. The GOES radiance time series are automatically processed on data reception and made available in near-real-time, so such time series can contribute to three main monitoring functions: (a) automatically alerting major effusive events; (b) event confirmation and assessment; and (c) establishing effusive event chronology.

Bulletin of Volcanology↗
USGS1991

Jasper Seamount: Seven million years of volcanism

Jasper Seamount is a young, mid-sized (690 km 3 ) oceanic intraplate volcano located about 500 km west-southwest of San Diego, California. Reliable 40 Ar/ 39 Ar age data were obtained for several milligram-sized samples of 4 to 10 Ma plagioclase by using a defocused laser beam to clean the samples before fusion. Gee and Staudigel suggested that Jasper Seamount consists of a transitional to tholeiitic shield volcano formed by flank transitional series lavas, overlain by flank alkalic series lavas and summit alkalic series lavas. Twenty-nine individual 40 Ar/ 39 Ar laser fusion analyses on nine samples confirm the stratigraphy:10.3-10.0 Ma for the flank transitional series, 8.7-7.5 Ma for the flank alkalic series, and 4.8-4.1 Ma for the summit alkalic series. The alkalinity of the lavas clearly increases with time, and there appear to be 1 to 3 m.y. hiatuses between each series. The age data are consistent with the complex magnetic anomaly of Jasper; however, the dominant reversed polarity inferred from the anomaly suggests that most of the seamount formed at ca. 11 Ma, prior to the onset of Chron C5N. The duration of volcanism of Jasper Seamount is slightly longer than the duration of volcanism at Hawaiian volcanoes, suggesting that individual age data from seamounts may constrain the age of a seamount only to within about 7 m.y. unless the stage of volcanism can be unambiguously determined. Extrapolating from the results of our study, similar precision in age determinations should be possible on 50 mg of 1 Ma plagioclase from mid-ocean ridge basalt, opening new possibilities in the geochronology of young, low-potassium volcanic rocks.

Geology↗
USGS2008

Coastal circulation and sediment dynamics in Hanalei Bay, Kaua'i. Part IV: Measurements of waves, currents, temperature, salinity, and turbidity: June-September 2006

High-resolution measurements of waves, currents, water levels, temperature, salinity and turbidity were made in Hanalei Bay, northern Kaua'i, Hawai'i, during the summer of 2006 to better understand coastal circulation, sediment dynamics, and the potential impact of a river flood in a coral reef-lined embayment during quiescent summer conditions. A series of bottommounted instrument packages were deployed in water depths of 10 m or less to collect long-term, high-resolution measurements of waves, currents, water levels, temperature, salinity, and turbidity. These data were supplemented with a series of profiles through the water column to characterize the vertical and spatial variability in water column properties within the bay. These measurements support the ongoing process studies being conducted as part of the U.S. Geological Survey (USGS) Coastal and Marine Geology Program's Pacific Coral Reef Project; the ultimate goal is to better understand the transport mechanisms of sediment, larvae, pollutants, and other particles in coral reef settings. Information regarding the USGS study conducted in Hanalei Bay during the 2005 summer is available in Storlazzi and others (2006), Draut and others (2006) and Carr and others (2006). This report, the last part in a series, describes data acquisition, processing, and analysis for the 2006 summer data set.

Hawaii↗
USGS1993

Modern average global sea-surface temperature

The data contained in this data set are derived from the NOAA Advanced Very High Resolution Radiometer Multichannel Sea Surface Temperature data (AVHRR MCSST), which are obtainable from the Distributed Active Archive Center at the Jet Propulsion Laboratory (JPL) in Pasadena, Calif. The JPL tapes contain weekly images of SST from October 1981 through December 1990 in nine regions of the world ocean: North Atlantic, Eastern North Atlantic, South Atlantic, Agulhas, Indian, Southeast Pacific, Southwest Pacific, Northeast Pacific, and Northwest Pacific. This data set represents the results of calculations carried out on the NOAA data and also contains the source code of the programs that made the calculations. The objective was to derive the average sea-surface temperature of each month and week throughout the whole 10-year series, meaning, for example, that data from January of each year would be averaged together. The result is 12 monthly and 52 weekly images for each of the oceanic regions. Averaging the images in this way tends to reduce the number of grid cells that lack valid data and to suppress interannual variability.

Data Series↗
USGS2023

Long-term monitoring in transition: Resolving spatial mismatch and integrating multistate occupancy data

The success of long-term wildlife monitoring programs can be influenced by many factors and study designs often represent compromises between spatial scales and costs. Adaptive monitoring programs can iteratively manage this tension by adopting new cost-efficient technologies, which can provide projects the opportunity to reallocate costs to address new hypotheses, adapt to changing ecological conditions, or adjust sampling scale or resolution. If there is interest in longer time series of monitoring data, methodological transitions may necessitate integrated models to link newer data with historical data. However, data integration can be difficult if spatial or temporal scales are mismatched. Here, we develop an integrated multistate site-occupancy model and resolve sample unit spatial mismatch to link datasets from two northern spotted owl ( Strix occidentalis caurina ) monitoring schemes that broadly overlapped during a methodological transition. The first dataset was obtained from a decades-long spotted owl monitoring program using call-playback and mark-resight surveys on historical territories of varying size and shape. This monitoring program has recently transitioned to passive acoustic monitoring of randomly selected 5-km 2 hexagons over larger spatial extents. Both monitoring datasets overlapped with areas in which barred owl ( Strix varia ), an invasive competitor that has played an important role in northern spotted owl declines, were being removed experimentally. Reconciling spatial mismatch substantially increased the representation of the call-playback dataset and integrating the two datasets increased precision of spotted owl use and paired occupancy estimates relative to single dataset estimates. Estimates of spotted owl pair occupancy across the study area were lower than previous territory-based estimates based on call-playback surveys. Our integrated model further showed that a concurrent barred owl removal experiment increased landscape use and site occupancy by pairs of spotted owls. Our empirical application of an integrated modelling approach demonstrates a useful analytical framework for long-term monitoring efforts undergoing methodological transitions (e.g. mark-recapture to non-invasive population monitoring). This framework allows monitoring programs to maintain continuity of monitoring objectives across methodological transitions, rigorously incorporate previous findings, and adaptively respond to changing ecological conditions.

Oregon↗
USGS2019

The Mw 6.0 South Napa earthquake of August 24, 2014—Observations of surface faulting and ground deformation, with recommendations for improving post-earthquake field investigations

The M w 6.0 South Napa earthquake of August 24, 2014, produced complex and extensive surface faulting and other ground deformation features. Following the event, geologists made more than 1,200 field observations at locations where tectonic faulting and ground failure produced visible deformation that fractured and disturbed the ground surface. At a few locations, large-scale, detailed, field-based maps of fault rupture and ground deformation were produced. The South Napa earthquake response was one of the first times when post-earthquake reconnaissance data were mostly collected and disseminated electronically. The advantages and opportunities these new methods bring to our research also pose new challenges to large-scale compilation efforts and demonstrate the value of developing guidelines and better standardization across the community to more optimally utilize developing technology in future post-earthquake investigations. Some suggestions for standardizing the collection and dissemination of post-earthquake field reconnaissance data are provided herein. Field observations and maps were integrated with airborne imagery, lidar, and InSAR to produce a comprehensive, large-scale digital map of fault rupture and zones of ground deformation. The map, observations, and photo database are summarized here in appendixes and figures and are also available as a series of digital data products within a companion U.S. Geological Survey data release ( Ponti and others, 2019 ); the characteristics of fault rupture and ground deformation features are summarized in detail in the body of this report. The results of this compilation reveal that faulting occurred within a 2-km-wide zone on six, roughly parallel traces within the West Napa Fault System. Most of the fault slip, and all the afterslip, occurred on the 21-km-long westernmost trace (Trace A). Maximum coseismic slip was greater than 40 cm and possibly as great as 60 cm, with the slip maximum located about 10 km north of the epicenter. Extensive ground deformation also occurred off the principal fault traces. Deformation characteristics of these features were not consistent with either primary faulting or shaking-induced ground failure and remain enigmatic, although this report includes speculation about possible origins. The use of InSAR was invaluable for identifying and mapping secondary traces with small displacements, and for delineating the overall details of the extensive rupture. InSAR data also highlighted other areas with possible ground deformation—some of which are found coincident with previously mapped fault traces, whereas others are in areas where no faults were previously mapped. Several of these regions had no visible ground deformation, whereas others did produce features that were inconsistent with tectonic faulting, so care must be taken not to over interpret the InSAR data without careful, corroborating field investigations.

California↗
USGS1978

Collection, storage, retrieval, and publication of water-resources data

This publication represents a series of papers devoted to the subject of collection, storage, retrieval, and publication of hydrologic data. The papers were presented by members of the U.S. Geological Survey at the International Seminar on Organization and Operation of Hydrologic Services, Ottawa, Canada, July 15-16, 1976, sponsored by the World Meteorological Organization. The first paper, ' Standardization of Hydrologic Measurements, ' by George F. Smoot discusses the need for standardization of the methods and instruments used in measuring hydrologic data. The second paper, ' Use of Earth Satellites for Automation of Hydrologic Data Collection, ' by Richard W. Paulson discusses the use of inexpensive battery-operated radios to transmit realtime hydrologic data to earth satellites and back to ground receiving stations for computer processing. The third paper, ' Operation Hydrometeorological Data-Collection System for the Columbia River, ' by Nicholas A. Kallio discusses the operation of a complex water-management system for a large river basin utilizing the latest automatic telemetry and processing devices. The fourth paper, ' Storage and Retrieval of Water-Resources Data, ' by Charles R. Showen discusses the U.S. Geological Survey 's National Water Data Storage and Retrieval System (WATSTORE) and its use in processing water resources data. The final paper, ' Publication of Water Resources Data, ' by S. M. Lang and C. B. Ham discusses the requirement for publication of water-resources data to meet the needs of a widespread audience and for archival purposes. (See W78-09324 thru W78-09328) (Woodard-USGS)

Circular↗
USGS2000

Altitude, depth, and thickness of the Galena-Platteville Bedrock Unit in the subcrop area of Illinois and Wisconsin

The Galena-Platteville bedrock unit is a carbonate deposit of Ordovician age, composed of the Galena and Platteville Groups in Illinois and the Sinnippee Group in Wisconsin. It is the uppermost bedrock unit (subcrop) in most of northern Illinois and southern and eastern Wisconsin. The subcrop area is shaded in figure 1 of sheet 1 (Batten and others, 1997). The unit is predominately dolomite, with limestone in some areas, and has a weathered surface. Across the subcrop area, the hydrologic characteristics of the bedrock unit vary substantially. The bedrock unit may be either a confining unit or an aquifer. In areas where the Galena-Platteville bedrock unit is an aquifer, the unit is a dependable source of water for many private wells and some municipal-water-supply systems. Ground water in the Galena-Platteville bedrock aquifer is susceptible to contamination because the bedrock unit is near land surface in much of the study area, and the fractures in the unit allow rapid movement of water providing limited capacity to attenuate contaminants. The subcrop (study) area covers approximately 7,850 square miles in northern Illinois and Wisconsin. In the study area, volatile organic compounds and other contaminants have been detected in the aquifer at various sites (Mills, 1993; Kay and others, 1994). Many sources of contaminants, including landfills and industrial facilities, are known or suspected. In order to determine the possible effects of contamination on the ground-water supply, an understanding of the regional hydrogeologic framework of the Galena-Platteville bedrock unit is needed. Published and unpublished map and point data describing the geologic properties of the Galena-Platteville bedrock unit are available from many sources. The U.S. Geological Survey (USGS), in cooperation with the U.S. Environmental Protection Agency (USEPA), has selected and compiled a large portion of the available data to create computer data bases and maps. The objective of this effort is to compile and publish these data in a series of reports (U.S. Geological Survey Water-Resources Investigations Reports (WRIR) 974054-A, WRIR 97-4054-B, WRIR 97-4054-C). This is the third in that series of reports. The report describes the altitude, thickness, and depth from land surface of the subcrop area of the Galena-Platteville bedrock unit. The report series will enable investigators involved in site-specific studies within the subcrop area to understand the regional geologic framework of the unit and to find additional reference sources. This report consists of four sheets that show the altitude (sheet 1), depth from land surface (sheet 2), total thickness (sheet 3), and location of altitude data (sheet 4) of the lithologic units that constitute the Galena-Platteville bedrock unit within the subcrop area. The sheets also show major known geologic features within the Galena-Platteville study area in Illinois and Wisconsin. A geographic information system (GIS) was used to generate data layers (coverages) from point data and from published and unpublished contour maps at various scales and detail. Standard GIS procedures were used to change the coverages into the maps shown on the sheets presented in this report. A list of references for the data used to prepare the maps is provided.

Illinois, Wisconsin↗
USGS2007

Mid-Pliocene Planktic Foraminifer Census Data from Ocean Drilling Program Hole 847C

Introduction The U.S. Geological Survey is conducting a long-term study of mid-Pliocene climatic and oceanographic conditions. One of the key elements of the study involves the use of quantitative composition of planktic foraminifer assemblages in conjunction with other proxies to constrain estimates of sea-surface temperature (SST) and to identify major oceanographic boundaries and water masses. Raw census data are made available as soon as possible after analysis through a series of reports that provide the basic data for future work. In this report we present raw census data (table 1) for planktic foraminifer assemblages in 25 samples from Ocean Drilling Program (ODP) Hole 847C. Ocean Drilling Program Hole 847C is located at 0.19?N., 95.32?W., in 3334.3 meters of water (fig. 1). A variety of statistical methods have been developed to transform foraminiferal census data in Pliocene sequences into quantitative estimates of Pliocene SST. Details of statistical techniques, taxonomic groupings, and oceanographic interpretations are presented in more formal publications (Dowsett and Poore, 1990, 1991; Dowsett, 1991, 2007; Dowsett and Robinson, 1998, 2007; Dowsett and others, 1996, 1999).

Data Series↗
USGS2008

Mid-Pliocene planktic foraminifer census data from Ocean Drilling Program Hole 1237C

The U.S. Geological Survey is conducting a long-term study of mid-Pliocene climatic and oceanographic conditions. One of the key elements of the study involves the use of quantitative composition of planktic foraminifer assemblages in conjunction with other proxies to constrain estimates of sea-surface temperature (SST) and to identify major oceanographic boundaries and water masses. Raw census data are made available as soon as possible after analysis through a series of reports that provide the basic data for future work. In this report we present raw census data (table 1) for planktic foraminifer assemblages in 19 samples from Ocean Drilling Program (ODP) Hole 1237C. ODP Hole 1237C is located on the Peruvian margin at 16? 0.4216'S., 76? 22.6854'W., in 3211.9 meters of water (fig. 1). A variety of statistical methods have been developed to transform foraminiferal census data in Pliocene sequences into quantitative estimates of Pliocene SST. Details of statistical techniques, taxonomic groupings, and oceanographic interpretations are presented in more formal publications.

Data Series↗