Search USGS⌕ Search

SEARCH · Search USGS

Results for “Scientific Data”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92Linked to original sources
USGS2005

Two-dimensional resistivity investigation of the North Cavalcade Street site, Houston, Texas, August 2003

The North Cavalcade Street site was first developed for wood treating in 1946. By 1955, pentachlorophenol wood preservation services and other support facilities, such as creosote ponds, pentachlorophenol and creosote storage structures, various tanks, lumber sheds, a treatment facility, and other buildings had been added. In 1961, the property was closed. To protect public health and welfare and the environment from release or threatened releases of hazardous substances, the U.S. Environmental Protection Agency added the North Cavalcade Street site to the National Priorities List on October 5, 1984. Between September 1985 and November 1987, the U.S. Environmental Protection Agency conducted a remedial investigation which, through exploratory drilling, determined the locations of two contaminated source areas and a normal fault. During August 2003, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, conducted a two-dimensional (2D) resistivity investigation at the North Cavalcade Street site to provide additional characterization of the dense non-aqueous phase liquids and the lithologies that can influence contaminant migration. The 2D resistivity investigation used a capacitively coupled (CC) resistivity method as a reconnaissance tool to locate geophysical anomalies that could be associated with possible areas of creosote contamination. The inversion results of the CC resistivity survey identified resistive anomalies in the subsurface near the eastern and western contaminated source areas. A direct-current (DC) resistivity survey conducted near the CC resistivity survey confirmed the occurrence of subsurface resistive anomalies. The inversion results of the DC resistivity survey were used to define the subsurface distribution of resistivity at each line. Forward modeling was used as an interpretative tool to relate the subsurface distribution of resistivity from four DC resistivity lines to known, assumed, and hypothetical information on subsurface lithologies. The final forward models were used as an estimate of the true resistivity structure for the field data. The forward models and the inversion results of the forward models show the depth, thickness, and extent of strata as well as the resistive anomalies occurring along the four lines and the displacement of strata resulting from the Pecore Fault along two of the four DC resistivity lines. Ten additional DC resistivity lines show similarly distributed shallow subsurface lithologies of silty sand and clay strata. Eight priority areas of resistive anomalies were identified for evaluation in future studies. The interpreted DC resistivity data allowed subsurface stratigraphy to be extrapolated between existing boreholes resulting in an improved understanding of lithologies that can influence contaminant migration.

Scientific Investigations Report↗
USGS2010

Temporal change in biological community structure in the Fountain Creek basin, Colorado, 2001-2008

In 2001, the U.S. Geological Survey, in cooperation with Colorado Springs City Engineering, began a study to better understand the relations between environmental characteristics and biological communities in the Fountain Creek basin in order to aide water-resource management and guide future monitoring activities. To accomplish this task, environmental (streamflow, habitat, and water chemistry) and biological (fish and macroinvertebrate) data were collected annually at 24 sites over a 6- or 8-year period (fish, 2003 to 2008; macroinvertebrates, 2001 to 2008). For this report, these data were first analyzed to determine the presence of temporal change in macroinvertebrate and fish community structure among years using nonparametric multivariate statistics. Where temporal change in the biological communities was found, these data were further analyzed using additional nonparametric multivariate techniques to determine which subset of selected streamflow, habitat, or water-chemistry variables best described site-specific changes in community structure relative to a gradient of urbanization. This study identified significant directional patterns of temporal change in macroinvertebrate and fish community structure at 15 of 24 sites in the Fountain Creek basin. At four of these sites, changes in environmental variables were significantly correlated with the concurrent temporal change identified in macroinvertebrate and fish community structure (Monument Creek above Woodmen Road at Colorado Springs, Colo.; Monument Creek at Bijou Street at Colorado Springs, Colo.; Bear Creek near Colorado Springs, Colo.; Fountain Creek at Security, Colo.). Combinations of environmental variables describing directional temporal change in the biota appeared to be site specific as no single variable dominated the results; however, substrate composition variables (percent substrate composition composed of sand, gravel, or cobble) collectively were present in 80 percent of the environmental variable subsets that were significantly correlated with temporal change in the macroinvertebrate and fish community structure. Other important environmental variables related to temporal change in the biological community structure included those describing channel form (streambank height) and streamflow (normalized annual mean daily flow, high flood-pulse count). Site-specific results from this study were derived from a relatively small number of observations (6 or 8 years of data); therefore, additional years of data may reveal other sites with temporal change in biological community structure, or could define stronger and more consistent linkages between environmental variables and observed temporal change. Likewise current variable subsets could become weaker. Nonetheless, there were several sites where temporal change was detected in this study that could not be explained by the available environmental variables studied herein. Modification of current data-collection activities may be necessary to better understand site-specific temporal relations between biological communities and environmental variables.

Scientific Investigations Report↗
USGS2014

Sediment characteristics in the San Antonio River Basin downstream from San Antonio, Texas, and at a site on the Guadalupe River downstream from the San Antonio River Basin, 1966-2013

San Antonio and surrounding municipalities in Bexar County, Texas, are in a rapidly urbanizing region in the San Antonio River Basin. The U.S. Geological Survey, in cooperation with the San Antonio River Authority and the Texas Water Development Board, compiled historical sediment data collected between 1996 and 2004 and collected suspended-sediment and bedload samples over a range of hydrologic conditions in the San Antonio River Basin downstream from San Antonio, Tex., and at a site on the Guadalupe River downstream from the San Antonio River Basin during 2011–13. In the suspended-sediment samples collected during 2011–13, an average of about 94 percent of the particles was less than 0.0625 millimeter (silt and clay sized particles); the 50 samples for which a complete sediment-size analysis was performed indicated that an average of about 69 percent of the particles was less than 0.002 millimeter. In the bedload samples collected during 2011–13, an average of 51 percent of sediment particles was sand-sized particles in the 0.25–0.5 millimeter-size range. In general, the loads calculated from the samples indicated that bedload typically composed less than 1 percent of the total sediment load. A least-squares log-linear regression was developed between suspended-sediment concentration and instantaneous streamflow and was used to estimate daily mean suspended-sediment loads based on daily mean streamflow. The daily mean suspended-sediment loads computed for each of the sites indicated that during 2011–12, the majority of the suspended-sediment loads originated upstream from the streamflow-gaging station on the San Antonio River near Elmendorf, Tex. A linear regression relation was developed between turbidity and suspended-sediment concentration data collected at the San Antonio River near Elmendorf site because the high-resolution data can facilitate understanding of the complex suspended-sediment dynamics over time and throughout the river basin.

Texas↗
USGS2018

Conceptual model to assess water use associated with the life cycle of unconventional oil and gas development

As the demand for energy increases in the United States, so does the demand for water used to produce many forms of that energy. Technological advances, limited access to conventional oil and gas accumulations, and the rise of oil and gas prices resulted in increased development of unconventional oil and gas (UOG) accumulations. Unconventional oil and gas is developed using a method that combines directional drilling and hydraulic fracturing techniques, allowing for greater oil and gas production from previously unrecoverable reservoirs. Quantification of the water resources required for UOG development and production is difficult because of disparate data sources, variable reporting requirements across boundaries (local, State, and national), and incomplete or proprietary datasets. A topical study was started in 2015 under the U.S. Geological Survey’s Water Availability and Use Science Program, as part of the directive in the Secure Water Act for the U.S. Geological Survey to conduct a National Water Census, to better understand the relation between production of UOG resources for energy and the amount of water needed to produce and sustain this type of energy development in the United States. The Water Availability and Use Science Program goal for this topical study is to develop and apply a statistical model to better estimate the water use associated with UOG development, regardless of the location and target geologic formation. As a first step, a conceptual model has been developed to characterize the life cycle of water use in areas of UOG development. Categories of water use and the way water-use data are collected might change over time; therefore, a generic approach was used in developing the conceptual model to allow for greater flexibility in adapting to future changes or newly available data. UOG development can be summarized into four stages: predrilling construction, drilling, hydraulic fracturing, and ongoing production. The water used in UOG production can be categorized further as direct, indirect, or ancillary water use. Direct water use is defined as the water used for drilling and hydraulic fracturing a well and for maintaining the well during ongoing production. Indirect water use is defined as the water used at or near a well pad. The water used for dust abatement also is considered an indirect use but may be applied away from the well pad. Ancillary water use is defined as the additional local or regional water use resulting from a change (for example, population) directly related to UOG development throughout the life cycle that is not used directly in the well or indirectly for any other purpose at the well pad. The conceptual model presented in this report consists of five elements: (1) input data, (2) processes, (3) decisions, (4) output data, and (5) outcomes. The input data requirements for estimating water use associated with UOG development are somewhat onerous, and obtaining suitable datasets can be challenging because local, State, and Federal agencies do not collect data similarly. The quality of a water-use assessment that uses the conceptual model presented in this report is dependent on the quality and quantity of data that are available for a UOG play. The conceptual model can be used for an assessment with sparse data; however, having sparse data likely will result in greater uncertainty in the water-use estimates. The conceptual model presented in this report is designed to be robust to characterize and simulate the data processing to estimate water use associated with UOG development. Although the results of an analysis that includes missing data have greater uncertainty, the analysis still can be insightful because it can establish a baseline estimate of UOG water use that may be refined further as more data become available. Analysis of models that include missing data also could aid in identifying the data most needed for future water-use estimates. Characterizing individual model limitations is important because the conceptual model can be used in future water-use studies to facilitate data compiling, data processing, estimating, and assessing UOG activities regardless of location.

Scientific Investigations Report↗
USGS2018

Characterization of peak streamflows and flood inundation of selected areas in southeastern Texas and southwestern Louisiana from the August and September 2017 flood resulting from Hurricane Harvey

Hurricane Harvey made landfall near Rockport, Texas, on August 25, 2017, as a Category 4 hurricane with wind gusts exceeding 150 miles per hour. As Harvey moved inland, the forward motion of the storm slowed down and produced tremendous rainfall amounts over southeastern Texas, with 8-day rainfall amounts exceeding 60 inches in some locations, which is about 15 inches more than average annual amounts of rainfall for eastern Texas and the Texas coast. Historic flooding occurred in Texas as a result of the widespread, heavy rainfall; wind and flood damages were estimated to be $125 billion, and the storm resulted in at least 68 direct fatalities. In the immediate aftermath of the Harvey-related flood event, the U.S. Geological Survey (USGS) and the Federal Emergency Management Agency initiated a cooperative study to evaluate the magnitude of the flood, determine the probability of occurrence, and map the extent of the flood in Texas. Seventy-four USGS streamflow-gaging stations in Texas with at least 15 years of record and no large data gaps in the period of record had a 2017 annual peak streamflow related to Harvey ranking in the top five of all annual peaks for each given station. New peaks of record streamflow were recorded at 40 of the 74 USGS streamflow-gaging stations. The number of years of peak streamflow record for the 74 analyzed streamflow-gaging stations ranged from 18 to 105, with a mean number of 55 years. The annual exceedance probability estimates for the analyzed streamflow-gaging stations ranged from less than 0.2 to 14.0 percent. USGS field crews surveyed 2,123 high-water marks to obtain water-surface elevations, in feet above the North American Vertical Datum of 1988. In some locations, several water-surface elevations were averaged to obtain 1 water-surface elevation, resulting in 1,258 water-surface elevations. Some of these high-water marks were used, along with peak-stage data from USGS streamflow-gaging stations, to create 19 inundation maps to document the areal extent of the maximum depth of the flooding. Digital datasets of the inundation area, modeling boundary, water-depth rasters, and final map products are available from the USGS data release associated with this report ( https://doi.org/10.5066/F7VH5N3N ).

Arkansas, Louisiana, Texas↗
USGS2018

Completion summary for borehole TAN-2312 at Test Area North, Idaho National Laboratory, Idaho

In 2017, the U.S. Geological Survey, in cooperation with the U.S. Department of Energy, drilled and constructed borehole TAN-2312 for stratigraphic framework analyses and long-term groundwater monitoring of the eastern Snake River Plain aquifer at the Idaho National Laboratory in southeast Idaho. The location of borehole TAN-2312 was selected because it was downgradient from TAN and believed to be the outer extent of waste plumes originating from the TAN facility. Borehole TAN-2312 initially was cored to collect continuous geologic data, and then re-drilled to complete construction as a monitor well. The final construction for borehole TAN-2312 required 16- and 10-inch (in.) diameter carbon-steel well casing to 37 and 228 feet below land surface (ft BLS), respectively, and 9.9-in. diameter open-hole completion below the casing to 522 ft BLS. Depth to water is measured near 244 ft BLS. Following construction and data collection, a temporary submersible pump and water-level access line were placed near 340 ft BLS to allow for aquifer testing, for collecting periodic water samples, and for measuring water levels. Borehole TAN-2312 was cored continuously, starting at the first basalt contact (about 37 ft BLS) to a depth of 568 ft BLS. Not including surface sediment (0–37 ft), recovery of basalt and sediment core at borehole TAN-2312 was about 93 percent; however, core recovery from 170 to 568 ft BLS was 100 percent. Based on visual inspection of core and geophysical data, basalt examined from 37 to 568 ft BLS consists of about 32 basalt flows that range from approximately 3 to 87 ft in thickness and 4 sediment layers with a combined thickness of approximately 76 ft. About 2 ft of total sediment was described for the saturated zone, observed from 244 to 568 ft BLS, near 296 and 481 ft BLS. Sediment described for the saturated zone were composed of fine-grained sand and silt with a lesser amount of clay. Basalt texture for borehole TAN-2312 generally was described as aphanitic, phaneritic, and porphyritic. Basalt flows varied from highly fractured to dense with high to low vesiculation. Geophysical and borehole video logs were collected after core drilling and after final construction at borehole TAN-2312. Geophysical logs were examined synergistically with available core material to suggest zones where groundwater flow was anticipated. Natural gamma log measurements were used to assess sediment layer thickness and location. Neutron and gamma-gamma source logs were used to identify fractured areas for aquifer testing. Acoustic televiewer logs, fluid logs, and electromagnetic flow meter results were used to identify fractures and assess groundwater movement when compared against neutron measurements. Furthermore, gyroscopic deviation measurements were used to measure horizontal and vertical displacement for borehole TAN-2312. After construction of borehole TAN-2312, a single-well aquifer test was completed September 27, 2017, to provide estimates of transmissivity and hydraulic conductivity. Estimates for transmissivity and hydraulic conductivity were 1.51×102 feet squared per day and 0.23 feet per day, respectively. During the 220-minute aquifer test, well TAN-2312 had about 23 ft of measured drawdown at sustained pumping rate of 27.2 gallons per minute. The transmissivity and hydraulic conductivity estimates for well TAN-2312 were lower than the values determined from previous aquifer tests in other wells near Test Area North. Water samples were analyzed for cations, anions, metals, nutrients, volatile organic compounds, stable isotopes, and radionuclides. Water samples for most of the inorganic constituents showed concentrations near background levels for eastern regional groundwater. Water samples for stable isotopes of oxygen, hydrogen, and sulfur indicated some possible influence of irrigation on the water quality. The volatile organic compound data indicated that this well had some minor influence by wastewater disposal practices at Test Area North.

Idaho↗
USGS2019

Capacity and area of Grand Lake O’ the Cherokees, northeastern Oklahoma, 2009

In February 2017, the Grand River Dam Authority filed to relicense the Pensacola Hydroelectric Project with the Federal Energy Regulatory Commission. The predominant feature of the Pensacola Hydroelectric Project is Pensacola Dam, which impounds Grand Lake O’ the Cherokees (locally called Grand Lake) in northeastern Oklahoma. Identification of information gaps and assessment of project effects on stakeholders are central aspects of the Federal Energy Regulatory Commission relicensing process. Due to the natural changes to the reservoir over time, new capacity and area tables are needed periodically. The most recent complete capacity and area table was produced in 1940. Capacity and area tables identify the relations between the elevation of the water surface and the volume of water that can be impounded at each water surface elevation. This report (1) presents an updated capacity and area table for Grand Lake O’ the Cherokees for 2009, (2) describes the methods used to calculate the updated capacity and area values presented in the table, and (3) compares the updated capacity table to historical capacity tables produced from a survey in 1940 and from a hydrographic survey of the lake by the Oklahoma Water Resources Board in 2009. The new capacity values computed for Grand Lake O’ the Cherokees indicate that capacity at conservation pool elevation has decreased about 157,000 acre-feet or 10 percent since 1940 and capacity at top of dam elevation has decreased about 200,000 acre-feet or 8 percent since 1940. This difference in the capacities could be attributed to the advancements of technologies; the techniques used for surveying lakes have changed from the 1940 survey to the 2009 survey. Another possible reason for loss in capacity could be as time progresses, lakes like Grand Lake O’ the Cherokees slowly impound sediment carried by the rivers that feed into the lakes, thus diminishing the amount of water that the lake holds. The most recent survey used measured water depths and Global Position System collected electronically, but the methods used to collect data in 1940 are unknown. Due to the advancement of technology, the 2009 survey is likely more precise than the 1940 survey.

Oklahoma↗
USGS2019

Analytical framework to estimate water use associated with continuous oil and gas development

An analytical framework was designed to estimate water use associated with continuous oil and gas (COG) development in support of the U.S. Geological Survey Water Availability and Use Science Program. This framework was developed to better understand the relation between the production of COG resources for energy and the amount of water needed to sustain this type of energy development in the United States. The total mean undiscovered, technically recoverable volume of COG has increased, highlighting the continued need to develop approaches to better characterize water use associated with COG development. The analytical framework can be used to estimate water use associated with COG development for three water-use components—direct, indirect, and ancillary water use—that are related to the life cycle of COG development. Direct water use is defined as water used in a wellbore to complete a well, including the water used for drilling, cementing, stimulating, and maintaining the well during production. Indirect water use is the water used at or near the well site, including water used for dust abatement, for cleaning equipment, and for crew and staff use. Ancillary water use is all other water used during the life cycle of COG development that is not categorized as direct or indirect, such as additional local or regional water use resulting from a change (for example, population) related to COG development. The analytical framework includes the data inputs, the processes involved in estimating the water-use coefficients and analyzing their uncertainties, and the outputs. The analytical framework was developed as an R script, which contains the statistical models used to estimate water-use components. The availability of data across COG reservoirs in the United States is variable and presents challenges for estimating water use for extracting COG from their reservoirs; thus, the R script can be modified for the types of data available within a COG reservoir, the extent and resolution of data available for each water-use component, and the desired output of the water-use assessment. The script was written so that the units of the data in the script were standardized. Water-use estimates were simulated for the mean and 10th, 50th, and 90th percentiles of the data distributions. Uncertainties were quantified with confidence intervals for the estimated coefficients. Uncertainty for estimated or simulated data can be calculated with the R script by providing a range of representative values that are within the appropriate confidence intervals of the mean of the data.

Lower 48 states↗
USGS2020

External quality assurance project report for the National Atmospheric Deposition Program’s National Trends Network and Mercury Deposition Network, 2017–18

The U.S. Geological Survey (USGS) Precipitation Chemistry Quality Assurance project (PCQA) operated five distinct programs to provide external quality-assurance monitoring for the National Atmospheric Deposition Program’s (NADP) National Trends Network and Mercury Deposition Network during 2017–18. The National Trends Network programs included (1) a field audit program to evaluate sample contamination and stability, (2) an interlaboratory comparison program to evaluate analytical laboratory performance, and (3) a colocated sampler program to evaluate variability attributed to automated precipitation samplers. The Mercury Deposition Network programs include the (4) system blank program and (5) an interlaboratory comparison program. The results indicate consistently low levels of sample contamination, generally strong analytical laboratory performance, and low overall variability in concentration data imparted by field equipment. The NADP operations moved from its 40-year home at the Illinois State Water Survey to the Wisconsin State Laboratory of Hygiene in June 2018. The PCQA programs were modified and (or) temporarily curtailed during the transition in 2018. Bias and variability of sample analysis results were evaluated for the two Central Analytical Laboratories, and ongoing monitoring will be helpful to differentiate true environmental signals from the effects of changing laboratory conditions and performance. Results of quality assurance sample analyses are provided to document that NADP data continue to be of sufficient quality for the analysis of spatial distributions and time trends for chemical constituents in wet deposition.

Scientific Investigations Report↗
USGS2025

Methods to determine streamflow statistics based on data through water year 2021 for selected streamgages in or near Wyoming

The U.S. Geological Survey (USGS), in cooperation with the Wyoming Water Development Office, developed streamflow statistics for streamgages in and near Wyoming. Statistics were computed for active (through September 30, 2021) and discontinued USGS streamgages with 10 or more years of daily mean streamflow record. Streamflow at each streamgage was assessed for degree of human alteration owing to dams and diversions before streamflow statistics were computed. Streamflow records from 615 streamgages were used to compute basic, seasonal, and flow-duration statistics; streamflow records from 387 streamgages were used to compute n -day statistics, which are streamflow statistics describing streamflow over a number of days ( n ), and statistics that can be used for regional regression. The streamflow statistics are provided in a USGS data publication that accompanies this report and through the USGS StreamStats web-based application ( https://www.usgs.gov/streamstats ).

Wyoming↗
USGS2024

Data and knowledge gaps of a water bottling facility inventory and select water-use dataset, United States

In 2023, the U.S. Geological Survey developed a national inventory of water bottling facilities for the United States, including information about locations, water sources, water use, and a collection of other attributes. The purpose of the inventory was to provide information about water bottling facilities needed to assess and improve understanding of local-, regional-, and national-scale hydrologic and socioeconomic effects resulting from water extraction for bottling. Beverage types coded in the North American Industry Classification System under subsector 312 (Beverage and Tobacco Product Manufacturing) were compiled; however, facility information was often not publicly available, time intensive to search manually, and difficult to verify because there are no nationally available facility lists. A separate evaluation of facilities in the Great Lakes region identified some facilities that were missing and some with incorrect information. Ancillary facility attributes were primarily available from a proprietary business dataset and water-use data could only be acquired for a small subset of facilities. These limitations and deficiencies may affect the types of analyses that can be done using the inventory information. Therefore, the following data-quality aspects are used to describe the information compiled in the facility and water-use tables: completeness, uniqueness, validity, timeliness, accuracy, consistency, and accessibility. The resulting implications of the data and knowledge gaps are that users of the data may need to make additional evaluations of the inventory information for some analyses.

Scientific Investigations Report↗
USGS2026

Occurrence of cyanobacteria and associated cyanotoxins in the Raritan Basin Water Supply Complex, New Jersey, August 2020 to August 2021

Harmful algal blooms, particularly cyanobacteria harmful algal blooms (cyanoHABs), have emerged as a substantial global concern because of their detrimental effects on water quality and aquatic ecosystem health. CyanoHABs can produce cyanotoxins, which pose serious health risks to humans and wildlife, such as liver failure and respiratory distress. This is particularly concerning for water bodies that serve as drinking-water sources. Recent trends indicate an increase in the frequency and intensity of cyanoHABs globally. This study focuses on the Raritan Basin Water Supply Complex in New Jersey, where extensive monitoring was conducted from August 2020 to August 2021 to assess the presence of cyanobacteria and associated cyanotoxins. The research utilized a combination of discrete water-quality sampling, continuous monitoring, and solid phase adsorption toxin tracking (SPATT) to capture the dynamics of cyanotoxin occurrence and potential transport. Findings revealed a widespread presence of cyanobacteria and potential for cyanotoxin production, although actual cyanotoxin concentrations remained below drinking water and recreational thresholds. The study, conducted by the U.S. Geological Survey (USGS) in collaboration with the New Jersey Water Supply Authority (NJWSA) and the New Jersey Department of Environmental Protection (NJDEP), highlighted the limitations of traditional sampling methods and emphasized that continuous monitoring can support better understanding of how cyanoHAB conditions change over time and in different places. Genetic testing included quantitative polymerase chain reaction (qPCR) analyses, which demonstrated higher sensitivity, or increased findings of cyanobacteria compared to microscopy, indicating the potential for use in early warning systems. This research underscores that integrating various detection methods and hydrological data can enhance understanding of cyanotoxin dynamics in river systems.

New Jersey↗
USGS2026

Assessing the state of hydrologic science in the Upper Klamath Basin—A comprehensive review of data, tools, and models

Water demand in the Upper Klamath Basin (UKB) from various stakeholders and ecological needs often outstrips available supply, leading to persistent management challenges. This study reviews the state of hydrologic science within the UKB as of 2025—specifically, the tools, data, and models available for assessing five key components of the water system: (1) surface water; (2) precipitation; (3) evapotranspiration; (4) groundwater; and (5) water use. The UKB water supply is critical for Native American communities, regional agriculture, and federally listed fishes and faces challenges from competing needs, climate variability, and operational/regulatory requirements. We assess existing datasets, regional and national models, and historical studies to understand the available resources and identify gaps that may hinder integrated water assessments and management. Our findings indicate areas where improvements in data collection and model precision could improve the accuracy of water-availability forecasts and support water-management practices. This review can inform near-term forecasting, assist in optimizing water-resource data collection and management strategies, and support regional water-availability assessments of the basin.

Oregon↗
USGS2013

Historical methane hydrate project review

In 1995, U.S. Geological Survey made the first systematic assessment of the volume of natural gas stored in the hydrate accumulations of the United States. That study, along with numerous other studies, has shown that the amount of gas stored as methane hydrates in the world greatly exceeds the volume of known conventional gas resources. However, gas hydrates represent both a scientific and technical challenge and much remains to be learned about their characteristics and occurrence in nature. Methane hydrate research in recent years has mostly focused on: (1) documenting the geologic parameters that control the occurrence and stability of gas hydrates in nature, (2) assessing the volume of natural gas stored within various gas hydrate accumulations, (3) analyzing the production response and characteristics of methane hydrates, (4) identifying and predicting natural and induced environmental and climate impacts of natural gas hydrates, and (5) analyzing the effects of methane hydrate on drilling safety. Methane hydrates are naturally occurring crystalline substances composed of water and gas, in which a solid water-­‐lattice holds gas molecules in a cage-­‐like structure. The gas and water becomes a solid under specific temperature and pressure conditions within the Earth, called the hydrate stability zone. Other factors that control the presence of methane hydrate in nature include the source of the gas included within the hydrates, the physical and chemical controls on the migration of gas with a sedimentary basin containing methane hydrates, the availability of the water also included in the hydrate structure, and the presence of a suitable host sediment or “reservoir”. The geologic controls on the occurrence of gas hydrates have become collectively known as the “methane hydrate petroleum system”, which has become the focus of numerous hydrate research programs. Recognizing the importance of methane hydrate research and the need for a coordinated effort, the U.S. Congress enacted Public Law 106-­‐193, the Methane Hydrate Research and Development Act of 2000. This Act called for the Secretary of Energy to begin a methane hydrate research and development program in consultation with other U.S. federal agencies. At the same time a new methane hydrate research program had been launched in Japan by the Ministry of International Trade and Industry to develop plans for a methane hydrate exploratory drilling project in the Nankai Trough. Since this early start we have seen other countries including India, China, Canada, and the Republic of Korea establish large gas hydrate research and development programs. These national led efforts have also included the investment in a long list of important scientific research drilling expeditions and production test studies that have provided a wealth of information on the occurrence of methane hydrate in nature. The most notable expeditions and projects have including the following: -­‐Ocean Drilling Program Leg 164 (1995) -­‐Japan Nankai Trough Project (1999-­‐2000) -­‐Ocean Drilling Program Leg 204 (2004) -­‐Japan Tokai-­‐oki to Kumano-­‐nada Project (2004) -­‐Gulf of Mexico JIP Leg I (2005) -­‐Integrated Ocean Drilling Program Expedition 311 (2005) -­‐Malaysia Gumusut-­‐Kakap Project (2006) -­‐India NGHP Expedition 01 (2006) -­‐China GMGS Expedition 01 (2007) -­‐Republic of Korea UBGH Expedition 01 (2007) -­‐Gulf of Mexico JIP Leg II (2009) -­‐Republic of Korea UBGH Expedition 02 (2010) -­‐MH-­‐21 Nankai Trough Pre-­‐Production Expedition (2012-­‐2013) -­‐Mallik Gas Hydrate Testing Projects (1998/2002/2007-­‐2008) -­‐Alaska Mount Elbert Stratigraphic Test Well (2007) -­‐Alaska Iġnik Sikumi Methane Hydrate Production Test Well (2011-­‐2012) Research coring and seismic programs carried out by the Ocean Drilling Program (ODP) and Integrated Ocean Drilling Program (IODP), starting with the ODP Leg 164 drilling of the Blake Ridge in the Atlantic Ocean in 1995, have also contributed greatly to our understanding of the geologic controls on the formation, occurrence, and stability of gas hydrates in marine environments. For the most part methane hydrate research expeditions carried out by the ODP and IODP provided the foundation for our scientific understanding of gas hydrates. The methane hydrate research efforts under ODP-­‐IODP have mostly dealt with the assessment of the geologic controls on the occurrence of gas hydrate, with a specific goal to study the role methane hydrates may play in the global carbon cycle. Over the last 10 years, national led methane hydrate research programs, along with industry interest have led to the development and execution of major methane hydrate production field test programs. Two of the most important production field testing programs have been conducted at the Mallik site in the Mackenzie River Delta of Canada and in the Eileen methane hydrate accumulation on the North Slope of Alaska. Most recently we have also seen the completion of the world’s first marine methane hydrate production test in the Nankai Trough in the offshore of Japan. Industry interest in gas hydrates has also included important projects that have dealt with the assessment of geologic hazards associated with the presence of hydrates. The scientific drilling and associated coring, logging, and borehole monitoring technologies developed in the long list of methane hydrate related field studies are one of the most important developments and contributions associated with methane hydrate research and development activities. Methane hydrate drilling has been conducted from advanced scientific drilling platforms like the JOIDES Resolution and the D/V Chikyu, which feature highly advanced integrated core laboratories and borehole logging capabilities. Hydrate research drilling has also included the use of a wide array of industry, geotechnical and multi-­‐service ships. All of which have been effectively used to collect invaluable geologic and engineering data on the occurrence of methane hydrates throughout the world. Technologies designed specifically for the collection and analysis of undisturbed methane hydrate samples have included the development of a host of pressure core systems and associated specialty laboratory apparatus. The study and use of both wireline conveyed and logging-­‐while-­‐drilling technologies have also contributed greatly to our understanding of the in-­‐situ nature of hydrate-­‐bearing sediments. Recent developments in borehole instrumentation specifically designed to monitor changes associated with hydrates in nature through time or to evaluate the response of hydrate accumulations to production have also contributed greatly to our understanding of the complex nature and evolution of methane hydrate systems. Our understanding of how methane hydrates occur and behave in nature is still growing and evolving – we do not yet know if methane hydrates can be economically produced, nor do we know fully the role of hydrates as an agent of climate change or as a geologic hazard. But it is known for certain that scientific drilling has contributed greatly to our understanding of hydrates in nature and will continue to be a critical source of the information to advance our understanding of methane hydrates.

Report↗
USGS1989

Ground-water quality assessment of the central Oklahoma aquifer, Oklahoma - Analysis of available water-quality data through 1987

Beginning in 1986, the Congress annually has appropriated funds for the U.S. Geological Survey to test and refine concepts for a National Water-Quality Assessment (NAWQA) Program. The long-term goals of a full-scale program would be to: Provide a nationally consistent description of current water-quality conditions for a large part of the Nation's surface- and ground-water resources; Define long-term trends (or lack of trends) in water quality; and Identify, describe, and explain, as possible, the major factors that affect the observed water-quality conditions and trends. The results of the NAWQA Program will be made available to water managers, policy makers, and the public, and will provide an improved scientific basis for evaluating the effectiveness of water-quality management programs. At present (1988), the assessment program is in a pilot phase in seven project areas throughout the country that represent diverse hydrologic environments and water-quality conditions. The Central Oklahoma aquifer project is one of three pilot ground-water projects. One of the initial activities performed by each pilot project was to compile, screen, and interpret the large amount of water-quality data available within each study unit. The purpose of this report is to assess the water quality of the Central Oklahoma aquifer using the information available through 1987. The scope of the work includes compiling data from Federal, State, and local agencies; evaluating the suitability of the information for conducting a regional water-quality assessment; mapping regional variations in major-ion chemistry; calculating summary statistics of the available water-quality data; producing maps to show the location and number of samples that exceeded water-quality standards; and performing contingency-table analyses to determine the relation of geologic unit and depth to the occurrence of chemical constituents that exceed water-quality standards. This report provides an initial description of water-quality conditions in the Central Oklahoma aquifer study unit. No attempt was made in this report to determine the causes for regional variations in major-ion chemistry or to examine the reasons that some chemical constituents exceed water-quality standards.

Oklahoma↗
USGS2013

Computationally efficient statistical differential equation modeling using homogenization

Statistical models using partial differential equations (PDEs) to describe dynamically evolving natural systems are appearing in the scientific literature with some regularity in recent years. Often such studies seek to characterize the dynamics of temporal or spatio-temporal phenomena such as invasive species, consumer-resource interactions, community evolution, and resource selection. Specifically, in the spatial setting, data are often available at varying spatial and temporal scales. Additionally, the necessary numerical integration of a PDE may be computationally infeasible over the spatial support of interest. We present an approach to impose computationally advantageous changes of support in statistical implementations of PDE models and demonstrate its utility through simulation using a form of PDE known as “ecological diffusion.” We also apply a statistical ecological diffusion model to a data set involving the spread of mountain pine beetle (Dendroctonus ponderosae) in Idaho, USA.

Journal of Agricultural, Biological, and Environme↗
USGS1965

Vigil Network sites: A sample of data for permanent filing

The Vigil Network consists of places where observations are made through time to record changes in landscape features over a long period. Resurveys will usually be made once each year or every few years and the period of observation, hopefully, will extend through and beyond the International Hydrological Decade. Vigil Network sites will usually be chosen to represent some typical feature of a given landscape. In the example shown here, the feature is a small ephemeral channel in a basin of moderate relief underlain by silty sandstone typical of the surrounding area. Vigil sites are not protected from man's influence and indeed may be selected because of the possible or portending cultural influences. In this respect they differ from the Bench Mark Network whose purpose is to make precise observations of hydrologic factors in areas uninfluenced by and protected from man's use. The factors which might be observed are many and varied. A few might be mentioned here, others are explained at length elsewhere (Miller and Leopold, 1963; Leopold, 1962). Streamchannel position, form, depth, and profile; vegetation in form of transects or quadrats; soil movement on slopes; rock movement on slopes or in channels. These and many more would yield valuable information on changes with time. To assure permanence of initial field observations, including reference points, bench marks, and cross sections, brief descriptions, maps, and initial data should be filed identically in designated repositories where the data will be made available for inspection by any interested scientist. It is recommended that the designation of two such locations where records of the type here attached will be filed be taken up by the Coordinating Council of the International Hydrological Decade. In designating such repositories it should be recognized that there is no need for elaborate indexing. The main requirement is merely the maintenance of a simple file where the data are stored and can be inspected or copied by any scientist. There need be no special provision for lending or reproduction services. The present document is an example showing what data, maps, and descriptions should be included in those permanent files at the two repositories. The material in these repositories should be sufficient to permit someone in the indefinite future to find and remeasure the same features described now. Thus the scientific value of the original surveys increases with time, - provided that the descriptions are sufficient to allow a person to find with assurance the original feature in the field. It must be visualized that a permanent repository must economize in space. Thus, as the example here shows, the filed material is not all of the original field notes but a summary, brief but descriptive.

International Association of Scientific Hydrology ↗
USGS2009

Supplemental materials for the ICDP-USGS Eyreville A, B, and C core holes, Chesapeake Bay impact structure: Core-box photographs, coring-run tables, and depth-conversion files

During 2005-2006, the International Continental Scientific Drilling Program and the U.S. Geological Survey drilled three continuous core holes into the Chesapeake Bay impact structure to a total depth of 1766.3 m. A collection of supplemental materials that presents a record of the core recovery and measurement data for the Eyreville cores is available on CD-ROM at the end of this volume and in the GSA Data Repository. The supplemental materials on the CD-ROM include digital photographs of each core box from the three core holes, tables of the three coring-run logs, as recorded on site, and a set of depth-conversion programs. In this chapter, the contents, purposes, and basic applications of the supplemental materials are briefly described. With this information, users can quickly decide if the materials will apply to their specific research needs.

Chesapeake Bay↗