Search USGS⌕ Search

SEARCH · Search USGS

Results for “Energy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92Linked to original sources
USGS2024

Deformation-induced graphitization and muscovite recrystallization in a ductile fault zone

A suite of slate samples collected along a 2 km transect crossing the Lishan fault in central Taiwan were evaluated to assess the role of ductile deformation in natural graphitization at lower greenschist facies metamorphic conditions. The process of natural aromatization, or graphitization, of an organic precursor is well established as a thermally driven process; however, experimental studies have shown that the energy provided by deformation can substantially reduce the activation energy required for graphitization. This study provides a natural example of deformation-induced graphitization. A strain gradient approaching the Lishan fault was established by scanning electron microscope imaging and X-ray diffraction analysis of phyllosilicates and quartz that showed an increase in the strength of slaty cleavage development via dissolution-precipitation processes. Thermal conditions were constrained to be near isothermal using calcite-dolomite geothermometry. Raman spectroscopic results from carbonaceous material, including D1-full width-at-half-maximum (FWHM), G-FWHM, Raman band separation (RBS), and a lesser-known vibrational mode B 2g -FWHM, showed robust linear trends across the same sampling transect. However, the G-FWHM parameter showed a trend opposite of that expected from thermally driven graphitization. The Raman results are interpreted to reflect a strain-driven reduction in graphite crystallite size (decrease in G-FWHM) but improvement in structural ordering in individual coherent domains. A multiple linear regression with an R 2 value of 0.92 predicts the graphite D1-FWHM values from the XRD-derived ratio of muscovite populations and muscovite microstrain, demonstrating the concomitant recrystallization of silicates and carbonaceous material across the strain gradient, despite the disparate processes accommodating the deformation. This study demonstrates the role of deformation in natural graphitization and provides a new perspective on the use of graphite as a geothermometer in strongly deformed greenschist facies rocks.

Journal of Metamorphic Geology↗
USGS2023

Effects of feeding and habitat on resting metabolic rates of the Pacific walrus

Arctic marine mammals live in a rapidly changing environment due to the amplified effects of global warming. Pacific walruses ( Odobenus rosmarus divergens ) have responded to declines in Arctic sea-ice extent by increasingly hauling out on land farther from their benthic foraging habitat. Energy models can be useful for better understanding the potential implications of changes in behavior on body condition and reproduction but require behavior-specific metabolic rates. Here we measured the resting metabolic rates (RMR) of three captive, adult female Pacific walruses through breath-by-breath respirometry when fed and fasted resting out of water (sitting and lying down) and while fed resting in water. RMR in and out of water were positively related with pretrial energy intake when not fasted and 25% higher than RMR when walruses were fasted and out of water. Overall, RMR was higher than previously estimated for this species. Fasting RMR out of water was only 25% lower than subsurface swimming metabolic rates suggestive of relatively efficient swimming in adult females. Our results identify the importance of considering feeding status and species-specific differences in affecting metabolic costs. Further research is needed to better understand potential energetic costs of thermoregulation at temperatures experienced by wild walruses.

Valencia↗
USGS2017

Reclamation after oil and gas development does not speed up succession or plant community recovery in big sagebrush ecosystems in Wyoming

Article for intended outlet: Restoration Ecology. Abstract: Reclamation is an application of treatment(s) following a disturbance to promote succession and accelerate the return of target conditions. Previous studies have framed reclamation in the context of succession by studying its effectiveness in re-establishing late-successional plant communities. Re-establishment of these plant communities is especially important and potentially challenging in regions such as drylands and shrub steppe ecosystems where succession proceeds slowly. Dryland shrub steppe ecosystems are frequently associated with areas rich in fossil-fuel energy sources, and as such the need for effective reclamation after disturbance from fossil-fuel-related energy development is great. Past research in this field has focused primarily on coal mines; few researchers have studied reclamation after oil and gas development. To address this research gap and to better understand the effect of reclamation on rates of succession in dryland shrub steppe ecosystems, we sampled oil and gas wellpads and adjacent undisturbed big sagebrush plant communities in Wyoming, USA and quantified the extent of recovery for major functional groups on reclaimed and unreclaimed (recovered via natural succession) wellpads relative to the undisturbed plant community. Reclamation increased the rate of recovery for all forb and grass species as a group and for perennial grasses, but did not affect other functional groups. Rather, analyses comparing recovery to environmental variables and time since wellpad abandonment showed that recovery of other groups were affected primarily by soil texture and time since wellpad abandonment. This is consistent with studies in other ecosystems where reclamation has been implemented, suggesting that reclamation may not help re-establish late-successional plant communities more quickly than they would re-establish naturally.

Wyoming↗
USGS2026

CrustCheck: A conceptual framework for interpreting biocrust trait–function relationships in drylands

Introduction Biocrusts are increasingly recognized for their contribution to soil stability, hydrology, nutrient cycling, and energy balance in drylands, yet practical field methods for assessing functional roles are limited. Existing approaches typically rely on cover estimates, taxonomic identification, or laboratory analyses, providing little insight into functional variation among biocrust types. To address this gap, we developed CrustCheck, a literature-derived conceptual framework that synthesizes potential relationships between easily observable biocrust traits and key ecological functions. The framework provides a foundation for future empirical validation of these relationships. Objectives We aimed to: (1) identify visual characteristics of biocrusts potentially associated with key ecological functions, and (2) synthesize these relationships into a literature-derived conceptual framework for comparative interpretation of potential biocrust contributions to landscape function. Methods We conducted a structured review of global literature on biocrusts' contribution to landscape function, drawing on multiple databases, targeted journals, and identifying relevant scientific publications from reference lists. We screened sources for information on relationships between visual traits and metrics of landscape function, synthesized relationships thematically, and used them to develop a multi-trait, function-oriented conceptual framework to inform further testing of these hypotheses in the field. Results Our review revealed that visual traits such as thickness/height, patchiness, cover, and surface roughness emerged as potential indicators of surface stability, hydrological function, and nutrient accumulation. Community composition was also frequently associated with these functions, while color reflected energy balance and carbon fixation potential. Conclusions Literature reveals that visual traits of biocrusts may serve as proxies for landscape function. CrustCheck is presented here as a conceptual synthesis framework intended to support interpretation of potential trait–function relationships rather than as a quantitatively validated predictive tool.

Restoration Ecology↗
USGS2024

Model predictions of global geologic hydrogen resources

Geologic hydrogen could be a low-carbon primary energy resource; however, the magnitude of Earth’s subsurface endowment has not yet been assessed. Knowledge of the occurrence and behavior of natural hydrogen on Earth has been combined with information from geologic analogs to construct a mass balance model to predict the resource potential. Given the associated uncertainty, stochastic model results predict a wide range of values for the potential in-place hydrogen resource [10 3 to 10 10 million metric tons (Mt)] with the most probable value of ~5.6 × 10 6 Mt. Although most of this hydrogen is likely to be impractical to recover, a small fraction (e.g., 1 × 10 5 Mt) would supply the projected hydrogen needed to reach net-zero carbon emissions for ~200 years. This amount of hydrogen contains more energy (~1.4 × 10 16 MJ) than all proven natural gas reserves on Earth (~8.4 × 10 15 MJ). Study results demonstrate that further research into understanding the potential for geologic hydrogen resources is merited.

Science Advances↗
USGS2009

Assessment of undiscovered oil and gas in the Arctic

Among the greatest uncertainties in future energy supply and a subject of considerable environmental concern is the amount of oil and gas yet to be found in the Arctic. By using a probabilistic geology-based methodology, the United States Geological Survey has assessed the area north of the Arctic Circle and concluded that about 30% of the world’s undiscovered gas and 13% of the world’s undiscovered oil may be found there, mostly offshore under less than 500 meters of water. Undiscovered natural gas is three times more abundant than oil in the Arctic and is largely concentrated in Russia. Oil resources, although important to the interests of Arctic countries, are probably not sufficient to substantially shift the current geographic pattern of world oil production.

Science↗
USGS1972

Rotational inertia of continents: A proposed link between polar wandering and plate tectonics

A mechanism is proposed whereby displacement between continents and the earth's pole of rotation (polar wandering) gives rise to latitudinal transport of continental plates (continental drift) because of their relatively greater rotational inertia. When extended to short-term polar wobble, the hypothesis predicts an energy change nearly equivalent to the seismic energy rate.

Science↗
USGS1994

The temporal distribution of seismic radiation during deep earthquake rupture

The time history of energy release during earthquakes illuminates the process of failure, which remains enigmatic for events deeper than about 100 kilometers. Stacks of teleseismic records from regional arrays for 122 intermediate (depths of 100 to 350 kilometers) and deep (depths of 350 to 700 kilometers) earthquakes show that the temporal pattern of short-period seismic radiation has a systematic variation with depth. On average, for intermediate depth events more radiation is released toward the beginning of the rupture than near the end, whereas for deep events radiation is released symmetrically over the duration of the event, with an abrupt beginning and end of rupture. These findings suggest a variation in the style of rupture related to decreasing fault heterogeneity with depth.The time history of energy release during earthquakes illuminates the process of failure, which remains enigmatic for events deeper than about 100 kilometers. Stacks of teleseismic records from regional arrays for 122 intermediate (depths of 100 to 350 kilometers) and deep (depths of 350 to 700 kilometers) earthquakes show that the temporal pattern of short-period seismic radiation has a systematic variation with depth. On average, for intermediate depth events more radiation is released toward the beginning of the rupture than near the end, whereas for deep events radiation is released symmetrically over the duration of the event, with an abrupt beginning and end of rupture. These findings suggest a variation in the style of rupture related to decreasing fault heterogeneity with depth.

Science↗
USGS1989

Hydrogen and formate oxidation coupled to dissimilatory reduction of iron or manganese by Alteromonas putrefaciens

The ability of Alteromonas putrefaciens to obtain energy for growth by coupling the oxidation of various electron donors to dissimilatory Fe(III) or Mn(IV) reduction was investigated. A. putrefaciens grew with hydrogen, formate, lactate, or pyruvate as the sole electron donor and Fe(III) as the sole electron acceptor. Lactate and pyruvate were oxidized to acetate, which was not metabolized further. With Fe(III) as the electron acceptor, A. putrefaciens had a high affinity for hydrogen and formate and metabolized hydrogen at partial pressures that were 25-fold lower than those of hydrogen that can be metabolized by pure cultures of sulfate reducers or methanogens. The electron donors for Fe(III) reduction also supported Mn(IV) reduction. The electron donors for Fe(III) and Mn(IV) reduction and the inability of A. putrefaciens to completely oxidize multicarbon substrates to carbon dioxide distinguish A. putrefaciens from GS-15, the only other organism that is known to obtain energy for growth by coupling the oxidation of organic compounds to the reduction of Fe(III) or Mn(IV). The ability of A. putrefaciens to reduce large quantities of Fe(III) and to grow in a defined medium distinguishes it from a Pseudomonas sp., which is the only other known hydrogen-oxidizing, Fe(III)-reducing microorganism. Furthermore, A. putrefaciens is the first organism that is known to grow with hydrogen as the electron donor and Mn(IV) as the electron acceptor and is the first organism that is known to couple the oxidation of formate to the reduction of Fe(III) or Mn(IV). Thus, A. putrefaciens provides a much needed microbial model for key reactions in the oxidation of sediment organic matter coupled to Fe(III) and Mn(IV) reduction.

Applied and Environmental Microbiology↗
USGS1993

Dissimilatory Fe(III) reduction by the marine microorganism Desulfuromonas acetoxidans

The ability of the marine microorganism Desulfuromonas acetoxidans to reduce Fe(III) was investigated because of its close phylogenetic relationship with the freshwater dissimilatory Fe(III) reducer Geobacter metallireducens. Washed cell suspensions of the type strain of D. acetoxidans reduced soluble Fe(III)-citrate and Fe(III) complexed with nitriloacetic acid. The c -type cytochrome(s) of D. acetoxidans was oxidized by Fe(III)-citrate and Mn(IV)-oxalate, as well as by two electron acceptors known to support growth, colloidal sulfur and malate. D. acetoxidans grew in defined anoxic, bicarbonate-buffered medium with acetate as the sole electron donor and poorly crystalline Fe(III) or Mn(IV) as the sole electron acceptor. Magnetite (Fe 3 O 4 ) and siderite (FeCO 3 ) were the major end products of Fe(III) reduction, whereas rhodochrosite (MnCO 3 ) was the end product of Mn(IV) reduction. Ethanol, propanol, pyruvate, and butanol also served as electron donors for Fe(III) reduction. In contrast to D. acetoxidans, G. metallireducens could only grow in freshwater medium and it did not conserve energy to support growth from colloidal S 0 reduction. D. acetoxidans is the first marine microorganism shown to conserve energy to support growth by coupling the complete oxidation of organic compounds to the reduction of Fe(III) or Mn(IV). Thus, D. acetoxidans provides a model enzymatic mechanism for Fe(III) or Mn(IV) oxidation of organic compounds in marine and estuarine sediments. These findings demonstrate that 16S rRNA phylogenetic analyses can suggest previously unrecognized metabolic capabilities of microorganisms.

Applied and Environmental Microbiology↗
USGS1995

Fe(III) and S0 reduction by Pelobacter carbinolicus

There is a close phylogenetic relationship between Pelobacter species and members of the genera Desulfuromonas and Geobacter , and yet there has been a perplexing lack of physiological similarities. Pelobacter species have been considered to have a fermentative metabolism. In contrast, Desulfuromonas and Geobacter species have a respiratory metabolism with Fe(III) serving as the common terminal electron acceptor in all species. However, the ability of Pelobacter species to reduce Fe(III) had not been previously evaluated. When a culture of Pelobacter carbinolicus that had grown by fermentation of 2,3- butanediol was inoculated into the same medium supplemented with Fe(III), the Fe(III) was reduced. There was less accumulation of ethanol and more production of acetate in the presence of Fe(III). P. carbinolicus grew with ethanol as the sole electron donor and Fe(III) as the sole electron acceptor. Ethanol was metabolized to acetate. Growth was also possible on Fe(III) with the oxidation of propanol to propionate or butanol to butyrate if acetate was provided as a carbon source. P. carbinolicus appears capable of conserving energy to support growth from Fe(III) respiration as it also grew with H 2 or formate as the electron donor and Fe(III) as the electron acceptor. Once adapted to Fe(III) reduction, P. carbinolicus could also grow on ethanol or H 2 with S 0 as the electron acceptor. P. carbinolicus did not contain detectable concentrations of the c -type cytochromes that previous studies have suggested are involved in electron transport to Fe(III) in other organisms that conserve energy to support growth from Fe(III) reduction. These results demonstrate that P. carbinolicus may survive in some sediments as an Fe(III) or S 0 reducer rather than growing fermentatively on rare substrates or syntrophically as an ethanol-oxidizing acetogen. These studies also suggest that the ability to use Fe(III) as a terminal electron acceptor may be an important unifying feature of the Geobacter-Desulfuromonas- Pelobacter branch of the delta Proteobacteria .

Applied and Environmental Microbiology↗
USGS1998

Microbial diversity in a hydrocarbon- and chlorinated-solvent- contaminated aquifer undergoing intrinsic bioremediation

A culture-independent molecular phylogenetic approach was used to survey constituents of microbial communities associated with an aquifer contaminated with hydrocarbons (mainly jet fuel) and chlorinated solvents undergoing intrinsic bioremediation. Samples were obtained from three redox zones: methanogenic, methanogenic-sulfate reducing, and iron or sulfate reducing. Small-subunit rRNA genes were amplified directly from aquifer material DNA by PCR with universally conserved or Bacteria - or Archaea -specific primers and were cloned. A total of 812 clones were screened by restriction fragment length polymorphisms (RFLP), approximately 50% of which were unique. All RFLP types that occurred more than once in the libraries, as well as many of the unique types, were sequenced. A total of 104 (94 bacterial and 10 archaeal) sequence types were determined. Of the 94 bacterial sequence types, 10 have no phylogenetic association with known taxonomic divisions and are phylogenetically grouped in six novel division level groups (candidate divisions WS1 to WS6); 21 belong to four recently described candidate divisions with no cultivated representatives (OP5, OP8, OP10, and OP11); and 63 are phylogenetically associated with 10 well-recognized divisions. The physiology of two particularly abundant sequence types obtained from the methanogenic zone could be inferred from their phylogenetic association with groups of microorganisms with a consistent phenotype. One of these sequence types is associated with the genus Syntrophus ; Syntrophus spp. produce energy from the anaerobic oxidation of organic acids, with the production of acetate and hydrogen. The organism represented by the other sequence type is closely related to Methanosaeta spp., which are known to be capable of energy generation only through aceticlastic methanogenesis. We hypothesize, therefore, that the terminal step of hydrocarbon degradation in the methanogenic zone of the aquifer is aceticlastic methanogenesis and that the microorganisms represented by these two sequence types occur in syntrophic association.

Applied and Environmental Microbiology↗
USGS1988

The formation and failure of natural dams

Of the numerous kinds of dams that form by natural processes, dams formed from landslides, glacial ice, and late-neoglacial moraines present the greatest threat to people and property. Landslide dams form in a wide range of physiographic settings. The most common types of mass movements that form landslide dams are rock and debris avalanches; rock and soil slumps and slides; and mud, debris, and earth flows. The most common initiation mechanisms for dam-forming landslides are excessive rainfall and snowmelt and earthquakes. Landslide dams can be classified into six categories based on their relation with the valley floor. Type I dams (11% of 184 landslide dams from around the world that we were able to classify) do not reach from one valley side to the other. Type II dams (44%) span the entire valley floor, in some cases depositing material high on opposite valley sides. Type III dams (41%) move considerable distances both upstream and downstream from the landslide failure. Type IV dams (<1%) are rare and involve the contemporaneous failure of material from both sides of a valley. Type V dams (<1%) also are rare and are created when a single landslide sends multiple tongues of debris into a valley and forms two or more landslide dams in the same reach of river. Type VI dams (3%) involve one or more failure surfaces that extend under the stream or valley and emerge on the opposite valley side. Many landslide dams fail shortly after formation. In our sample of 73 documented landslide-dam failures, 27% of the landslide dams failed less than 1 day after formation, and about 50% failed within 10 days. Over-topping is by far the most common cause of failure. The timing of failure and the magnitude of the resulting floods are controlled by dam size and geometry; material characteristics of the blockage; rate of inflow to the impoundment; size and depth of the impoundment; bedrock control of flow; and engineering controls such as artificial spill-ways, diversions, tunnels, and planned breaching by blasting or conventional excavation. Glacial-ice dams can produce at least nine kinds of ice-dammed lakes. The most dangerous are lakes formed in main valleys dammed by tributary glaciers. Failure can occur by erosion of a drainage tunnel under or through the ice dam or by a channel over the ice dam. Cold polar-ice dams generally drain supraglacially or marginally by downmelting of an outlet channel. Warmer, temperate-ice dams tend to fail by sudden englacial or subglacial breaching and drainage. Late-neoglacial moraine-dammed lakes are located in steep mountain areas affected by the advances and retreats of valley glaciers in the last several centuries. These late-neoglacial dams pose hazards because (1) they are sufficiently young that vegetation has not stabilized their slopes, (2) many dam faces are steeper than the angle of repose, (3) these dams and lakes are immediately downslope from steep crevassed glaciers and near-vertical rock slopes, and (4) downstream from these dams are steep canyons with easily erodible materials that can be incorporated in the flow and increase flood peaks. The most common reported failure mechanism is overtopping and breaching by a wave or series of waves in the lake generated by icefalls, rockfalls, or snow or rock avalanches. Melting of ice cores or frozen ground and piping and seepage are other possible failure mechanisms. Natural dams may cause upstream flooding as the lake rises and downstream flooding as a result of failure of the dam. Although data are few, for the same potential energy at the dam site, ownstream flood peaks from the failure of glacier-ice dams are smaller than those from landslide, moraine, and structed earth-fill and rock-fill dam failures. Moraine-dam failures appear to produce some of the largest downstream flood peaks for potential energy at the dam site greater than 10 11 -10 12 joules. Differences in flood peaks natural-dam failures appear to be controlled by dam characteristics and failure mechanisms.

Geological Society of America Bulletin↗
USGS1999

Evolution of Cupido and Coahuila carbonate platforms, early Cretaceous, northeastern Mexico

The Cupido and Coahuila platforms of northeastern Mexico are part of the extensive carbonate platform system that rimmed the ancestral Gulf of Mexico during Barremian to Albian time. Exposures of Cupido and Coahuila lithofacies in several mountain ranges spanning an ∼80000 km 2 area reveal information about platform morphology and composition, paleoenvironmental relations, and the chronology of platform evolution. New biostratigraphic data, integrated with carbon and strontium isotope stratigraphy, significantly improve chronostratigraphic relations across the region. These data substantially change previous age assignments of several formations and force a revision of the longstanding stratigraphy in the region. The revised stratigraphy and enhanced time control, combined with regional facies associations, allow the construction of cross sections, isopach maps, and time-slice paleogeographic maps that collectively document platform morphology and evolution. The orientation of the Cupido (Barremian-Aptian) shelf margin was controlled by the emergent Coahuila basement block to the northwest. The south-facing margin is a high-energy grainstone shoal, whereas the margin facing the ancestral Gulf of Mexico to the east is a discontinuous rudist-coral reef. A broad shelf lagoon developed in the lee of the Cupido margin, where as much as 660 m of cyclic peritidal deposits accumulated. During middle to late Aptian time, a major phase of flooding forced a retrograde backstep of the Cupido platform, shifting the locus of shallow-marine sedimentation northwestward toward the Coahuila block. This diachronous flooding event records both the demise of the Cupido shelf and the consequent initiation of the Coahuila ramp. The backstepped Coahuila ramp (Aptian-Albian) consisted of a shallow shoal margin separating an interior evaporitic lagoon from a low-energy, muddy deep ramp. More than 500 m of cyclic carbonates and evaporites accumulated in the evaporitic lagoon during early to middle Albian time. Restriction of the platform interior dissipated by middle to late Albian time with the deposition of peloidal, miliolid-rich packstones and grainstones of the Aurora Formation. The Coahuila platform was drowned during latest Albian to early Cenomanian time, and the deep-water laminites of the Cuesta del Cura Formation were deposited. This study fills in a substantial gap in the Cretaceous paleogeography of the eastern Gulf of Mexico coast, improving regional correlations with adjacent hydrocarbon-rich platforms. The enhanced temporal relations and chronology of events recorded in the Cupido and Coahuila platforms significantly improve global correlations with coeval, economically important platforms worldwide, perhaps contributing to the determination of global versus regional controls on carbonate platform evolution during middle Cretaceous time.

Geological Society of America Bulletin↗
USGS2002

Nearly frictionless faulting by unclamping in long-term interaction models

In defiance of direct rock-friction observations, some transform faults appear to slide with little resistance. In this paper finite element models are used to show how strain energy is minimized by interacting faults that can cause long-term reduction in fault-normal stresses (unclamping). A model fault contained within a sheared elastic medium concentrates stress at its end points with increasing slip. If accommodating structures free up the ends, then the fault responds by rotating, lengthening, and unclamping. This concept is illustrated by a comparison between simple strike-slip faulting and a mid-ocean-ridge model with the same total transform length; calculations show that the more complex system unclapms the transforms and operates at lower energy. In another example, the overlapping San Andreas fault system in the San Francisco Bay region is modeled; this system is complicated by junctions and stepovers. A finite element model indicates that the normal stress along parts of the faults could be reduced to hydrostatic levels after ???60-100 k.y. of system-wide slip. If this process occurs in the earth, then parts of major transform fault zones could appear nearly frictionless.

Geology↗
USGS2007

First documentation of tidal-channel sponge biostromes (upper Pleistocene, southeastern Florida)

Sponges are not a common principal component of Cenozoic reefs and are more typically dominant in deep-water and/or cold-water localities. Here we report the discovery of extensive upper Pleistocene shallow-marine, tropical sponge biostromes from the Mami Limestone of southeastern Florida built by a new ceractinomorph demosponge. These upright, barrel- to vase-shaped sponges occur in monospecific aggregations constructed within the tidal channels of an oolitic tidal-bar belt similar to modern examples on the Great Bahama Bank. The biostromes appear to have a ribbon-like geometry, with densely spaced sponges populating a paleochannel along a 3.5 km extent in the most lengthy biostrome. These are very large (as high as 2 m and 1.8 m in diameter), particularly well-preserved calcified sponges with walls as hard as concrete. Quartz grains are the most common particles agglutinated in the structure of the sponge walls. Where exposed, sediment fill between the sponges is commonly a highly burrowed or cross-bedded ooid-bearing grainstone and, locally, quartz sand. It is postulated that the dense, localized distribution of these particular sponges was due to a slight edge over competitors for food or energy supply and space in a stressed environment of tidal-influenced salinity and nutrient changes, strong currents, and frequently shifting submarine sand dunes. To our knowledge, this represents the first documentation of sponge biostromes composed of very large upright sponges within high-energy tidal channels between ooid shoals. The remarkably well-preserved accumulations provide an alternative example of sponge reefs for comparative paleoenvironmental studies. ?? 2007 The Geological Society of America.

Geology↗
USGS2007

Quantitative models for magma degassing and ground deformation (bradyseism) at Campi Flegrei, Italy: Implications for future eruptions

Campi Flegrei (Phlegrean Fields) is an active volcanic center near Naples, Italy. Numerous eruptions have occurred here during the Quaternary, and repeated episodes of slow vertical ground movement (bradyseism) have been documented since Roman times. Here, we present a quantitative model that relates deformation episodes to magma degassing and fracturing at the brittle-ductile transition in a magmatic-hydrothermal enviromnent. The model is consistent with field and laboratory observations and predicts that uplift between 1982 and 1984 was associated with crystallization of ???0.83 km3 of H2O-saturated magma at 6 km depth. During crystallization, ???6.2 ?? 1010 kg of H2O and 7.5 ?? 108 kg of CO2, exsolved from the magma and generated ???7 ?? 1015 J of mechanical (P??V) energy to drive the observed uplift. For comparison, ???1017 J of thermal energy was released during the 18 May 1980 lateral blast at Mount St. Helens. ?? 2007 The Geological Society of America.

Geology↗
USGS1993

Entrenchment and widening of the upper San Pedro River, Arizona

The San Pedro River of southeast Arizona is a north-flowing tributary of the Gila River. The area of the drainage basin upstream of the 40-km-long study reach is about 3,200 km 2 . This study traces the historical evolution of the San Pedro River channel—specifically, the deepening, widening, and sediment deposition that have occurred since 1900—and it aims to evaluate the causes of channel widening and deepening, the rate of widening, and the present stability of the channel. Alluvium of the river valley consists of upper Holocene pre- and postentrenchment deposits. The pre-entrenchment alluvium, which forms the principal terrace of the inner valley, accumulated between about A.D. 1450 and 1900 in a relatively sluggish, low-energy fluvial system with extensive marshy reaches and high water table. In contrast, postentrenchment alluvium, which forms the terrace, floodplain, and channel of the San Pedro River, was deposited in a relatively high-energy, entrenched, and meandering fluvial system. The river flowed in a shallow, narrow channel on the surface of the unentrenched valley before 1890. A series of large floods, perhaps beginning as early as 1881, eventually led to entrenchment of the channel between 1890 and 1908. This deepening placed the channel 1 to 10 m below the former floodplain. The channel has widened substantially since entrenchment through lateral migration and expansion of entrenched meanders; its present size is 5.7 times greater than before entrenchment. The rate of channel expansion, however, has decreased since about 1955, coincident with a decrease of peak-flood discharge. Channel area increased at 0.1 km 2 yr −1 from entrenchment until 1955; since then the area increased at only 0.02 km 2 yr −1 , suggesting that the channel has stabilized and that further widening will probably be minor under present conditions of land use, discharge, and climate. The reduction of peak-flow rates was related partly to increased channel sinuosity and to development of floodplains and riparian woodlands. The increased sinuosity produced a reservoir effect that attenuated flood waves, and the development of flood-plains enabled flood waters to spread laterally, thereby increasing transmission losses. In addition, flow rates were probably affected by improved land use and changes of rainfall intensity and short-term rainfall patterns, which reduced runoff and decreased the time necessary for channel stabilization. Livestock grazing decreased steadily after the turn of the century, and numerous stock ponds and small water-retention structures were constructed in tributaries. The cumulative effect of these structures probably reduced peak-flow rates. Short-term rainfall patterns of the wet season (June 15–October 15) have probably changed from annual alternation of above- and below-average rainfall to a biennial or longer pattern. Moreover, frequency of low-intensity rainfall (daily rainfall less than about 1.27 cm) was consistently above average for the decade 1957–1967. These factors probably improved conditions for growth and establishment of vegetation both in and outside of the channel. The causes of the large floods that resulted in entrenchment are poorly understood, although climate and land use were key factors. Floods followed closely the rapid settlement of the area brought about by mining activity in the late 1870s; population rose from a few hundred to 6,000 in less than 5 yr. Extensive wood cutting for mine timber and fuel, suppression of wildfire, and reintroduction of large cattle herds undoubtedly exacerbated entrenchment. Flood-producing wet-season rainfall in the Southwest, however, was unusually heavy before, during, and shortly after entrenchment.

Arizona↗