Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Geophysics Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91Linked to original sources
USGS2012

Preseismic and coseismic deformation associated with the Coyote Lake, California, earthquake

The Coyote Lake earthquake ( M L = 5.9; August 6, 1979; epicenter about 100 km southeast of San Francisco) occurred on the Calaveras fault within a geodetic network that had been surveyed annually since 1972 to monitor strain accumulation. The rupture surface as defined by aftershocks is a vertical rectangle 20 km in length extending from a depth of 4 km to about 12 km. The observed deformation of the geodetic network constrains the average slip to be about 0.33 ± 0.05 m right lateral. Although the geodetic data furnished an exceptionally detailed picture of the preearthquake deformation, no significant premonitory anomaly associated with the Coyote Lake earthquake can be identified.

Journal of Geophysical Research Solid Earth↗
USGS2012

Reservoir analysis of the Denver earthquakes: A case of induced seismicity

Injection of fluid wastes into the fractured Precambrian crystalline bedrock beneath the Rocky Mountain Arsenal near Denver triggered earthquakes in the 1960's. An analysis, based on the assumption that fluid flow in the fractured reservoir can be approximated by flow in a porous medium, is presented. The configuration and hydrologic properties of the reservoir are determined from two lines of evidence: (1) locations of earthquake hypocenters determined by seismic arrays installed at the Arsenal and (2) observed long-term decline in fluid levels in the injection well. Together these two sets of data indicate that a long, narrow reservoir, aligned in the direction N 60°W, exists. The reservoir is 3.35 km in width, extends 30.5 km to the northwest and infinitely to the southeast, and spans a depth interval from 3.7 to 7.0 km below land surface. It has a transmissivity of 1.08×10-5 m2/s and a storage coefficient of 1.0×10-5. Computed pressure buildup along the length of the reservoir is compared with the spatial distribution of earthquake epicenters. The comparison shows that earthquakes are confined to that part of the reservoir where the pressure buildup exceeds 32 bars. This critical value is interpreted as the pressure buildup above which earthquakes occur. The migration of earthquake epicenters away from the injection well, a phenomenon noted by previous investigators, can be accounted for by the outward propagation of the critical pressure buildup. The analysis is extended to examining the effects of rapid flow in fractures opened by high injection pressure. The results show that the effect is confined to a small region within 1 km of the injection well. The existence of a critical pressure buildup above which earthquakes occur is completely consistent with the theory on the role of fluid pressure in fault movement as presented by Hubbert and Rubey.

Colorado↗
USGS2012

Electrical properties of granite with implications for the lower crust

The electrical properties of granite appear to be dominantly controlled by the amount of free water in the granite and by temperature. Minor contributions to the electrical properties are provided by hydrostatic and lithostatic pressure, structurally bound water, oxygen fugacity, and other parameters. The effect of sulfur fugacity may be important but is experimentally unconfirmed. In addition to changing the magnitude of electrical properties, the amount and chemistry of water in granite significantly changes the temperature dependence of the electrical properties. With increasing temperature, changes in water content retain large, but lessened, effects on electrical properties. Near room temperature, a monolayer of water will decrease the electrical resistivity by an order of magnitude. Several weight-percent water may decrease the electrical resistivity by as much as 9 orders of magnitude and decrease the thermal activation energy by a factor of 5. At elevated temperatures just below granitic melting, a few weight-percent water may still decrease the resistivity by as much as 3 orders of magnitude and the activation energy by a factor of 2. Above the melting temperature (650° to 1100°C depending upon water pressure), a few weight-percent water will decrease the resistivity by less than an order of magnitude and will barely change the activation energy. Remarkably, the few weight-percent water must be present as free water. Experiments with hydrated hornblende schist (with structural water) indicate an electrical resistivity very similar to that for dry granite. The implications of these results, together with the findings of deep magnetic sounding and magnetotelluric surveys, suggest much more free water than is commonly associated with the lower crust and possibly into the upper mantle.

Journal of Geophysical Research Solid Earth↗
USGS2012

The Galapagos Spreading Centre at 86° W: A detailed geothermal field study

We report here measurements of the heat flow field of the Galapagos Spreading Center on crust of age less than 1.0 m.y. The 443 measurements in an area of about 570 km 2 reveal the general planform of the geothermal flux and permit the first truly areal estimate of the near-axis conductive heat flux. The intrusion process and associated hydrothermal circulation dominate the surface heat flow pattern, with circulation apparently continuing beyond the limits of our survey. The areal average of the conductive heat flux is 7.1 ± 0.8 HFU (295 ± 33 mW/m 2 ), about one-third the heat flux predicted by plate models. The remaining heat is apparently removed by venting of hydrothermal waters at the spreading axis and through basalt outcrops and hydrothermal mounds off axis. The pattern of surface heat flux is lineated parallel to the axis and the strongly lineated topography. Sharp lateral gradients in the heat flow, greater than 10 HFU/km near escarpments and commonly expressed as high heat flow at the tops of the scarps and lower heat flow in the valleys, may indicate a local concentration of the circulation by surface fault systems and/or variable sediment thickness.

Journal of Geophysical Research Solid Earth↗
USGS2012

The accommodation of relative motion at depth on the San Andreas fault system in California

Plate motion below the seismogenic layer along the San Andreas fault system in California is generally assumed to occur by aseismic slip along a deeper extension of the fault. It is also possible that below the seismogenic layer, deformation is distributed laterally over a zone. Several observed features of the San Andreas fault in California have implications about the mode of accommodation of relative motion along the plate boundary beneath the seismogenic zone: the shallow depth of all earthquakes in California, the depth to which coseismic slip occurred during the 1906 San Francisco earthquake, the broad zone of strain accumulation, the broad heat flow anomaly, and the existence of widely separated parallel faults. The observations strongly imply that below the seismogenic zone, relative motion is distributed over a zone and occurs by inelastic flow rather than by aseismic slip on discrete fault planes. The existence of multiple faults further suggests that tractions at the base of the brittle layer are significant over time periods of years to hundreds of years.

Journal of Geophysical Research Solid Earth↗
USGS2012

Strain accumulation across the Denali fault in the Delta River canyon, Alaska

Deformation along the Denali fault in the Delta River canyon was determined from geodetic surveys in 1941/1942, 1970, 1975, and 1979. The data were best for the 1975–1979 interval; in that period the average strain accumulation was essentially pure right lateral shear at a rate of 0.6 ± 0.1 μrad/a (a is years) (engineering shear) across a vertical plane striking N87°E. The plane of maximum shear is rotated about 30° counterclockwise from the local strike of the Denali fault but closely coincides with the strike of a major linear segment of the fault that begins 50 km farther west. The deformation between 1941/1942 and 1970 is consistent with a similar rate of strain accumulation if one removes the coseismic strain step contributed by the 1964 Alaska earthquake. The 1970–1975 deformation is poorly defined owing to uncertainties in the 1970 survey, but the strain accumulation during that period is certainly much less than during the 1975–1979 interval. The 1975–1979 strain accumulation is interpreted by means of a dislocation model which suggests that the Denali fault in the vicinity of the Delta River Canyon behaves as a leaky transform fault (i.e., a source of spreading as well as lateral slip). The block south of the Denali fault appears to be moving westward (parallel to the strike of the Denali fault west of the 147th meridian) at the rate of about 20 mm/a relative to the North American plate. Because the linear segment of the Denali fault east of the 147th meridian (along which the geodetic network is located) strikes N63°W, accommodation of the westward motion of the southern block requires some spreading within the fault zone as well as right lateral slip on the fault.

Journal of Geophysical Research Solid Earth↗
USGS2012

Variable rates of late Quaternary strike slip on the San Jacinto fault zone, southern California.

3 strike slip displacements of strata with known approximate ages have been measured at 2 locations on the San Jacinto fault zone. Minimum horizontal offset between 5.7 and 8.6km in no more than 0.73Myr NE of Anza indicates 8-12 mm/yr average slip rate since late Pleistocene time. Horizontal slip of 1.7m has been calculated for the youngest sediment of Lake Cahuilla since its deposition 271- 510 yr BP. The corresponding slip rate is 2.8-5.0 mm/yr. Right lateral offset of 10.9m measured on a buried stream channel older than 5060 yr BP but younger than 6820 yr BP yields average slip rates for the intermediate time periods, 400 to 6000 yr BP of 1-2 mm/yr. The rates of slip suggest a relatively quiescent period from about 4000 BC to about 1600 AD.-from Author

Journal of Geophysical Research↗
USGS2012

Tectonic setting for ophiolite obduction in Oman

The Samail ophiolite is part of an elongate belt in the Middle East that forms an integral part of the Alpine mountain chains that make up the northern boundary of the Arabian-African plate. The Samail ophiolite represents a portion of the Tethyan ocean crust formed at a spreading center of Middle Cretaceous age (Cenomanian). During the Cretaceous spreading of the Tethyan Sea, Gondwana Land continued its dispersal, and the Arabian-African plate drifted northward about 10°. These events combined with the opposite rotation of Eurasia and Africa initiated the closing of the Tethyan during the Late Cretaceous. At the early stages of closure, downwarping of the Arabian continental margin combined with the compressional forces of closure from the Eurasian plate initiated obduction of the Tethyan oceanic crust along preexisting transform faults, and still hot oceanic crust was detached along oblique northeast dipping thrust faults. Amphibolites developed at the base of the detached hot peridotite as it was thrust southward over oceanic volcanic and sedimentary rocks. Plate configurations combined with palinspastic reconstructions show that subduction and attendant large-scale island arc volcanism did not commence until after the Tethyan sea began to close and after the Samail ophiolite was emplaced southward across the Arabian continental margin. The Samail ophiolite nappe now rests upon a melange consisting mainly of pelagic sediments, volcanics, and detached fragments of the basal amphibolites which in turn rest on autochthonous shelf carbonates of the Arabian platform. Laterites and conglomerates with reworked laterites on the eroded upper surface of the ophiolite indicate a period of emergence prior to the deposition of shallow water Maestrichtian carbonates. Following emplacement (Eocene) of the Samail ophiolite, the Tethyan oceanic crust began northward subduction, and active arc volcanism started just north of the present Jaz Murian depression in Iran.

Journal of Geophysical Research Solid Earth↗
USGS2012

Sr isotopic tracer study of the Samail ophiolite, Oman

We have measured Rb and Sr concentrations and Sr isotopic compositions in 41 whole-rock samples and 12 mineral separates from units of the Samail ophiolite, including peridotite, gabbro, plagiogranite, diabase dikes, and gabbro and websterite dikes within the metamorphic peridotite. Ten samples of cumulate gabbro from the Wadir Kadir section and nine samples from the Wadi Khafifah section have mean 87 Sr/ 86 Sr ratios and standard deviations of 0.70314 ± 0.00030 and 0.70306 ± 0.00034, respectively. The dispersion in Sr isotopic composition may reflect real heterogeneities in the magma source region. The average Sr isotopic composition of cumulate gabbro falls in the range of isotopic compositions of modern midocean ridge basalt. The 87 Sr/ 86 Sr ratios of noncumulate gabbro, plagiogranite, and diabase dikes range from 0.7034 to 0.7047, 0.7038 to 0.7046, and 0.7037 to 0.7061, respectively. These higher 87 Sr/ 86 Sr ratios are due to alteration of initial magmatic compositions by hydrothermal exchange with seawater. Mineral separates from dikes that cut harzburgite tectonite have Sr isotopic compositions which agree with that of cumulate gabbro. These data indicate that the cumulate gabbro and the different dikes were derived from partial melting of source regions that had similar long-term histories and chemical compositions.

Journal of Geophysical Research Solid Earth↗
USGS2012

An assessment of the accuracy of the geodetic measurements that define the southern California uplift

Examination of the charge that the geodetic measurements which define the southern California uplift are seriously flawed by height-dependent systematic errors indicates that this charge is unfounded. Our review of those factors designed to minimize the effects of rod error shows that systematic errors attributable to rod miscalibration are trivial and would tend to cancel during the particularly pertinent period 1955–1965. Comparisons between the results of measurements in which the correlation between topography and signal is generally poor reveal large aseismic tilts in a number of places within and around the margins of the uplift. Especially significant in this context are the results of preuplift and postuplift levelings over routes characterized by diverse length, topography, and atmospheric conditions that produce closely matching, temporally equivalent heights for a representative bench mark within the uplift. Statistical analyses of the short-wavelength components of uplift signal and elevation along a frequently repeated survey line indicate variable correlations between the two. However, the spatial and temporal patterns of these correlations are inconsistent with their attribution to height-dependent systematic errors. Statistically significant short-wavelength correlations along this survey line are reasonably explained in part as due to real movement associated with differentially subsiding bench marks, and there is a strong likelihood that this movement tends to dominate many of the correlations.

Journal of Geophysical Research Solid Earth↗
USGS2012

Aeromagnetic and radio echo ice-sounding measurements over the Dufek intrusion, Antarctica

A combined aeromagnetic and radio echo ice-sounding survey (4200 km of traverse) made in 1978 in Antarctica over the Dufek layered mafic intrusion of Jurassic age suggests a minimum area of about 50,000 km 2 , making it comparable in size with the Bushveld Complex of Africa. Comparisons of the magnetic and subglacial topographic profiles illustrate the usefulness of this combination of methods in studying bedrock geology beneath ice-covered areas. Rocks are exposed in only 3% of the inferred area of the intrusion. Magnetic anomalies measured a few hundred meters above outcrops of the intrusion range in peak-to-trough amplitude from ∼50 nT over the lowermost exposed portion of the section in the Dufek Massif to ∼3600 nT over the uppermost part of the section in the Forrestal Range. Theoretical magnetic anomalies, computed from models based on the subice topography fitted to the highest-amplitude observed magnetic anomalies, required normal and reversed magnetizations ranging from 10 −4 to 10 −2 emu/cm 3 having directions and magnetizations consistent with measurements previously made on oriented samples. This result is interpreted as indicating that the Dufek intrusion cooled through the Curie isotherm during one or more reversals of the earth's magnetic field.

Journal of Geophysical Research Solid Earth↗
USGS2012

Rectangular harmonic analysis applied to the geomagnetic field

Spherical harmonic analysis of the earth's magnetic field is limited in the resolution that can be obtained. This limitation is caused by inadequacies of computers and of available data sets. The fundamental wavelength in spherical harmonic analysis is the circumference of the earth. To resolve wavelengths as short as 100 km would require a spherical harmonic analysis carried out to a degree and order 400 involving 160,800 coefficients. This is impractical even with modern computers. This limitation of spherical harmonic analysis can be overcome by using rectangular harmonic analysis in successively smaller areas so that the data are more fully utilized. Rectangular harmonic analysis is illustrated for data from Europe and then again for a subset of the data from a smaller area of Europe. The magnetic field at 15 observatories for the smaller area can be computed to an rms residual of only 7 nT for all three components using two sets of rectangular harmonic coefficients and the AWC/75 world chart model. Rectangular harmonic analysis and spherical harmonic analysis are complementary.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Magnetic effects of maghemitization of oceanic crust

Both theoretical considerations and available experimental results indicate that magnetic effects of maghemitization are strongly dependent on the grain size of the originally unoxidized titanomagnetite. Maghemitization of single‐domain titanomagnetite results in a decrease in coercivity, an increase in susceptibility, and a large decrease in Q ratio. Maghemitization of multidomain titanomagnetite results in an increase in coercivity, a decrease in susceptibility, and no large changes in Q ratio. Single‐domain titanomagnetite is probably resistant to the development of a chemical remanent magnetization (CRM), whereas multidomain titanomagnetite can acquire a CRM during maghemitization. The behavior of pseudo‐single‐domain titanomagnetite, which is the main carrier of remanence in submarine extrusive rocks, is investigated by comparing the magnetic properties of the French‐American Mid‐Ocean Undersea Study (FAMOUS) (less than 0.1 m.y. old) and the Leg 37 (3.5 m.y. old) pillow basalts recovered from the Mid‐Atlantic Ridge near 37°N. Combining electron microprobe analyses, Curie temperature measurements, and cell edge determinations, we find that the FAMOUS rocks are already oxidized ( z = 0.38), possibly as a result of some high‐temperature maghemitization during cooling of the magma. Comparison with the more highly oxidized ( z = 0.7) Leg 37 pillow basalts indicates that low‐temperature maghemitization of such rocks does not result in appreciable changes of coercivity and susceptibility, although the Q ratio does decrease and CRM seems to be acquired. Such a CRM could account for the anomalously low magnetic inclinations observed at most of the Leg 37 sites.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Geodetic strain measurements in Washington

Two new geodetic measurements of strain accumulation in the state of Washington for the interval 1972–1979 are reported. Near Seattle the average principal strain rates are 0.07 ± 0.03 μstrain/yr N 19°W and −0.13 ± 0.02 μstrain/yr N71°E, and near Richland (south central Washington) the average principal strain rates are −0.02 ± 0.01 μstrain/yr N36°W and −0.04 ± 0.01 μstrain/yr N54°E. Extension is taken as positive, and the uncertainties quoted are standard deviations. A measurement of shear strain accumulation (dilatation not determined) in the epoch 1914–1966 along the north coast of Vancouver Island by the Geodetic Survey of Canada indicates a marginally significant accumulation of right-lateral shear (0.06 ± 0.03 μrad/yr) across the plate boundary (N40°W strike). Although there are significant differences in detail, these strain measurements are roughly consistent with a crude dislocation model that represents subduction of the Juan de Fuca plate. The observed accumulation of strain implies that large, shallow, thrust earthquakes should be expected off the coast of Washington and British Columbia. However, this conclusion is not easily reconciled with either observations of elevation change along the Washington coast or the focal mechanism solutions for shallow earthquakes in Washington.

Journal of Geophysical Research Solid Earth↗
USGS2012

An interpretation of episodic slip on the Calaveras fault near Hollister, California

Data from a precision multi-wavelength distance measuring (MWDM) instrument, located near Hollister, California, have been analyzed in terms of strike-slip faulting in the region covered by the network. Four episodes of deformation that are readily identifiable in the MWDM data for the year following September 1975 can be modeled as slip on the Calaveras fault. Creepmeter data tend to support this interpretation, since the creep events and the observed episodes of deformation appear to be correlated in a temporal sense. Lower bounds on the moment for each episode of slip can be determined from the MWDM data by the technique of linear programing. The results indicate that aseismic slip is the dominant mechanism for strain release, since the combined moment of 1.16 × 10 24 dyn cm for the four episodes far exceeds the moment of all of the earthquakes that occurred during the year. Creepmeter data and geologic evidence that are taken in conjunction with the lower bound of the moment indicate that the depth of aseismic slip for some of the episodes of fault slip could extend to below the greatest depth of earthquake hypocenters for this region of central California.

Journal of Geophysical Research Solid Earth↗
USGS2012

Geodetic analysis of reservoir depletion at the Geyser steam field in northern California

Reservoir depletion at the Geysers from 1974 to 1977 is evident in measured changes in gravity, surface strain, and pore pressure drainage. The drainage area increased about 20%, the maximum gravity decrease was about −120 μGal, and the maximum elevation change was about 6 cm during this period. Since the net mass withdrawal is known, it may be combined with the gravity change to estimate a drainage volume. The maximum drainage volume is 25 km 3 . Because the depth of the caprock and extent of the pore pressure drainage is known, this volume limit implies that no significant mass withdrawal occurs below a depth of 4 km. The ratios of surface elevation changes to horizontal contraction coinciding with the drainage area imply an equant drainage geometry, assuming that fluid production produces negative dilatation. Using the same cylindrical geometry used to model the gravity, negative dilatational strain rates of 4 to 5 × 10 −5 /yr were found to produce the observed surface displacements. The likelihood of boiling in the system to produce steam combined with apparent large bulk moduli (from seismic velocities) and small pore pressure declines suggest that most of the reservoir contraction is due to cooling.

Journal of Geophysical Research Solid Earth↗
USGS2012

Strain accumulation in southern California, 1973-1980

Frequent surveys of seven trilateration networks in southern California over the interval 1973–1980 suggest that a regional increment in strain may have occurred in 1978–1979. Prior to 1978 and after late 1979 the strain accumulation has been predominantly a uniaxial north-south compression. This secular trend was interrupted sometime in 1978–1979 by an increment in both north-south and east-west extension in five of the seven networks. The onset of this change appears to have occurred first in the networks farthest south. The changes occurred without any unusual seismicity within the networks, but the overall seismicity in southern California was unusually low prior to and has been unusually high since the occurrence. The average principal strain rates for the seven networks in the 1973–1980 interval are 0.17 μstrain/yr north-south contraction and 0.08 μstrain/yr east-west extension. Although the observed increment in strain could be related to unidentified systematic error in the measuring system, a careful review of the measurements and comparisons with three other measuring systems reveal no appreciable cumulative systematic error.

Journal of Geophysical Research Solid Earth↗
USGS2012

The P-wave velocity of the uppermost mantle of the Rio Grande rift region of north central New Mexico

A network of seismograph stations has operated in north-central New Mexico since 1975. The network is approximately 200 by 300 km in size and encompasses the Rio Grande rift there. Several seismic refraction experiments have been reported in the literature for the region of the network and adjacent areas. Because all of the seismic refraction lines are unreversed, P n velocities reported were mainly of the inverse travel time slope for the direction of the corresponding line. The values of the inverse slope for those studies range from 7.6 to 8.2 km/s. The purpose of our study is to estimate the P wave velocity of the uppermost mantle by using the time term method. First, we timed the P n waves of strong signals from five explosions and eight shallow earthquakes recorded by the network. The main data set, which contains 87 time-distance pairs, was processed by using the time term method. The P n velocity estimated by this method is 8.0 ± 0.1 km/s. To corroborate this estimate, we then processed 10 subsets of the main data set in the same way. Almost all of the solutions show velocities of 7.9–8.1 km/s, in agreement with the velocity determined for the main data set. The station time terms of the main data set also are substantiated, and they suggest that the base of the crust dips northward by a few degrees in the region of the survey. The smallest value reported by other investigators for the inverse slope (7.6 km/s) appears to be related to the dip. The normal P wave velocity of the uppermost mantle of north-central New Mexico places restrictions on thermal models of the rift. For instance, the results exclude the likelihood of a wide zone of asthenosphere at the base of the crust beneath the rift, but they do not exclude a narrow such zone.

Journal of Geophysical Research Solid Earth↗