Search USGS⌕ Search

SEARCH · Search USGS

Results for “Sound Waves”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources
USGS2014

Sea-floor morphology and sedimentary environments of western Block Island Sound, northeast of Gardiners Island, New York

Multibeam-echosounder data, collected during survey H12299 by the National Oceanic and Atmospheric Administration in a 162-square-kilometer area of Block Island Sound, northeast of Gardiners Island, New York, are used along with sediment samples and bottom photography, collected at 37 stations in this area by the U.S. Geological Survey during cruise 2013-005-FA, to interpret sea-floor features and sedimentary environments. These data and interpretations provide important base maps for future studies of the sea floor, focused, for example, on benthic ecology and resource management. The features and sedimentary environments on the sea floor are products of the glacial history and modern tidal regime. Features include bedforms such as sand waves and megaripples, boulders, a large current-scoured depression, exposed glaciolacustrine sediments, and areas of modern marine sediment. Sand covers much of the study area and is often in the form of sand waves and megaripples, which indicate environments characterized by coarse-grained bedload transport. Boulders and gravelly lag deposits, which indicate environments of erosion or nondeposition, are found off the coast of Gardiners Island and on bathymetric highs, probably marking areas where deposits associated with recessional ice-front positions, the northern flank of the terminal moraine, or coastal-plain sediments covered with basal till are exposed. Bottom photographs and video of boulders show that they are commonly covered with sessile fauna. Strong tidal currents have produced the deep scour depression along the northwestern edge of the study area. The eastern side of this depression is armored with a gravel lag. Sea-floor areas characterized by modern marine sediments appear featureless at the 2-meter resolution of the bathymetry and flat to current rippled in the photography. These modern environments are indicative of sediment sorting and reworking.

New York↗
USGS2014

Combined multibeam and bathymetry data from Rhode Island Sound and Block Island Sound: a regional perspective

Detailed bathymetric maps of the sea floor in Rhode Island and Block Island Sounds are of great interest to the New York, Rhode Island, and Massachusetts research and management communities because of this area's ecological, recreational, and commercial importance. Geologically interpreted digital terrain models from individual surveys provide important benthic environmental information, yet many applications of this information require a geographically broader perspective. For example, individual surveys are of limited use for the planning and construction of cross-sound infrastructure, such as cables and pipelines, or for the testing of regional circulation models. To address this need, we integrated 14 contiguous multibeam bathymetric datasets that were produced by the National Oceanic and Atmospheric Administration during charting operations into one digital terrain model that covers much of Block Island Sound and extends eastward across Rhode Island Sound. The new dataset, which covers over 1244 square kilometers, is adjusted to mean lower low water, gridded to 4-meter resolution, and provided in Universal Transverse Mercator Zone 19, North American Datum of 1983 and geographic World Geodetic Survey of 1984 projections. This resolution is adequate for sea-floor feature and process interpretation but is small enough to be queried and manipulated with standard Geographic Information System programs and to allow for future growth. Natural features visible in the data include boulder lag deposits of winnowed Pleistocene strata, sand-wave fields, and scour depressions that reflect the strength of oscillating tidal currents and scour by storm-induced waves. Bedform asymmetry allows interpretations of net sediment transport. Anthropogenic features visible in the data include shipwrecks and dredged channels. Together the merged data reveal a larger, more continuous perspective of bathymetric topography than previously available, providing a fundamental framework for research and resource management activities offshore of Rhode Island.

Rhode Island↗
USGS1967

Effects of the earthquake of March 27, 1964, at Seward, Alaska

Seward, in south-central Alaska, was one of the towns most devastated by the Alaska earthquake of March 27, 1964. The greater part of Seward is built on an alluvial fan-delta near the head of Resurrection Bay on the southeast coast of the Kenai Peninsula. It is one of the few ports in south-central Alaska that is ice free all year, and the town’s economy is almost entirely dependent upon its port facilities. The Alaska earthquake of March 27, 1964, magnitude approximately 8.3–8.4, began at 6:36 p.m. Its epicenter was in the northern part of the Prince William Sound area; focal depth was 20–50 km. Strong ground motion at Seward lasted 3–4 minutes. During the shaking, a strip of land 50–400 feet wide along the Seward waterfront, together with docks and other harbor facilities, slid into Resurrection Bay as a result of large-scale submarine landsliding. Fractures ruptured the ground for'severa1 hundred feet back from the landslide scarps. Additional ground was fractured in the Forest Acres subdivision and on the alluvial floor of the Resurrection River valley; fountaining and sand boils accompanied the ground fracturing. Slide-generated wares, possibly seiche waves, and seismic sea waves crashed onto shore; ware runup was as much as 30 feet above mean lower low water and caused tremendous damage; fire from burning oil tanks added to the destruction. Damage from strong ground motion itself was comparatively minor. Tectonic subsidence of about 3.6 feet resulted in low areas being inundated at high tide. Thirteen people were killed and five were injured as a result of the earthquake. Eighty-six houses were totally destroyed and 260 were heavily damaged. The harbor facilities were almost completely destroyed, and the entire economic base of the town was wiped out. The total cost to replace the destroyed public and private facilities was estimated at $22 million. Seward lies on the axis of the Chugach Mountains geosyncline. The main structural trend in the mapped area, where the rocks consist almost entirely of graywacke and phyllite, is from near north to N. 20° E. Beds and cleavage of the rocks commonly dip 70° W. or NW. to near vertical. Locally, the rocks are complexly folded or contorted. So major faults were found in the mapped area, but small faults, shear zones, and joints are common. Surficial deposits of the area hare been divided for mapping into the following units: drift deposits, alluvial fan deposits, valley alluvium, intertidal deposits, landslide deposits, and artificial fill. Most of these units intergrade and were deposited more or less contemporaneously. The drift deposits consist chiefly of till that forms moraines along the lower flanks of the Resurrection River valley and up tributary valleys. The till is predominantly silt and sand and lesser amounts of clay-size particles, gravel, cobbles, and boulders. Glacial outwash and stratified ice-contact deposits constitute the remainder of the drift deposits. Fans and fan-deltas have been deposited at the valley mouths of tributary streams. Some, including the one upon which Seward built, project into Resurrection Bay, and deltaic-type deposits form their distal edges. The larger fans—composed chiefly of loosely compacted and poorly sorted silt, sand, and gravel—form broad aprons having low gradients. The fan deposits range in thickness from about 100 feet to possibly several hundred feet and, at least in some places, lie on a platform of compact drift. Smaller fans at the mouths of several canyons have steep gradients and considerable local relief. Valley alluvium, deposited chiefly by the Resurrection River, consists mostly of coarse sand and fine to medium gravel. In the axial part of the valley it is probably more than 100 feet thick. Near the head of Resurrection Bay, the alluvium is underlain by at least 75 feet of marine deltaic sediments, which are in turn underlain by 600 or more feet of drift in the deepest part of the bedrock valley. Beach, deltaic, and estuarine sediments, deposited on intertidal flats at the head of the bay and along far1 margins that extend into the bay, arc mapped as intertidal deposits. They consist mostly of silt, sand, and fine gravel, and lesser amounts of clay-size particles. The earthquake reactivated old slides and trigged new ones in the mountains. Rock and snow avalanches, debris flows, and creep of talus deposits characterized slide activity on the steeper slops. The Seward waterfront had been extended before the earthquake by adding artificial fill consisting of loose sand and gravel; part of the lagoon area had been filled with refuse. After the earth- quake, fill, consisting of silt and sand dredged from the head of the bay, was pumped onto part of the lagoon area and also on land at the northwest corner of the bay. Response to the disaster was immediate and decisive. City, State, and Federal agencies, as well as other organizations and individuals, gave unstintingly of their time and facilities. Within a few days, there was temporary restoration of water, sewerage, and electrical facilities. The U.S. Army Corps of Engineers was authorized to select sites and construct a new dock for the Alaska Railroad, a new small-boat basin, and related facilities. The firm of Shannon and Wilson, Inc., under contract to the Corps of Engineers, investigated subsurface soils extensively to determine the factors responsible for the sliding along the Seward waterfront and to assist in site selection for reconstruction of the destroyed harbor facilities. Borings also made along the Seward waterfront and at the head of the bay, and laboratory tests were conducted on pertinent samples. These studies were augmented by geophysical studies both on land and in the bay. In addition, the Corps of Engineers made shallow borings on the intertidal flats at the head of the bay and performed pile-driving and load tests. Borings also were drilled and test pits were dug in the subdivision of Forest Acres. Sliding along the Seward waterfront markedly deepened the water along the former shoreline. Post-earthquake slopes of the bay floor immediately offshore also are steeper in places than before the earthquake. The strong ground motion of the earthquake triggered the landsliding, but several factors may have contributed to the magnitude and characteristics of the slides. These factors are: (1) the long duration of strong ground motion, (2) the grain size and texture of the material involved in the sliding, (3) the probability that the finer grained materials liquefied and flowed seaward, and (4) the added load of manmade facilities built on the edge of the shore, Secondary effects of the slides themselves—sudden drawdown of water, followed by the weight of returning waves—also may have contributed to the destruction. Submarine sliding at the northwest corner of the bay occurred in fine-grained deltaic deposits whose frontal slopes probably were in metastable equilibrium under static conditions. Uplift pressures from aquifers under hydrostatic head, combined with the probable liquefaction characteristics of the sediments when vibrated by strong ground motion, probably caused the material to slide and flow seaward as a heavy slurry. Under static conditions, no major shoreline or submarine landsliding is expected in the Seward area; in the event of another severe earthquake, however, additional sliding is likely along the Seward waterfront and also in the deltaic deposits at the northwest corner of the bay. Fractured ground in back of the present shoreline along the Seward waterfront is an area of incipient landslides that would be unstable under strong shaking. For this reason the Scientific and Engineering Task Force placed the area in a high-risk classification and recommended no repair, rehabilitation, or new construction in this area involving use of Federal funds; it was further recommended that the area should be reserved for park or other uses that do not involve large congregations of people. The deltaic deposits at the head of the bay probably also would be susceptible to sliding during another large earthquake. This sliding would result in further landward retreat of the present shoreline toward the new railroad dock. Specifications for the new dock, whose seaward end is now approximately 1,100 feet from the back scarp of the subaqueous landslide, require design pro- visions to withstand seismic shock up to certain limits. Earthquake-induced fracturing of the ground in the subdivision of Forest Acres was confined to the lower part of a broad alluvial fan. There, sewer and water lines were ruptured and the foundations of some homes were heavily damaged. Landsliding, such as occurred along the shoreline of the bay, was not a contributing cause of the fracturing. Two hypotheses are offered to explain the fracturing: 1. Seismic energy was transformed into visible surface waves of such amplitude that the strength of surface layer was exceeded and rupturing occurred; tensional and compressional stresses alternately opened and closed the fractures and forced out water and mud. 2. Compaction by vibration of the fine-grained deposits of the fan caused ground settlement and fracturing; ground water under temporary hydrostatic head was forced to the surface as fountains and carried the finer material with it. Water waves that crashed onto shore, while shaking was still continuing, were generated chiefly by onshore and offshore landsliding. Waves that overran the shores about 25 minutes after shaking stopped and that continued to arrive for the next several hours are believed to be seismic sea waves (tsunamis) that originated in an uplifted area in the Gulf of Alaska. During the time of seismic sea-wave activity and perhaps preceding it, seiche wares also may have been generated within Resurrection Bay and complicated the wave effects along the shoreline.

Alaska↗
USGS1982

A 40-foot static cone penetrometer

The Navy needs a lightweight device for testing seafloor soils to sub bottom depths of 12 meters in water depths to 60 meters. To meet this need a quasistatic cone penetration device that uses water jetting to reduce friction on the cone rod has been developed. This device is called the XSP-40. The 5-ton XSP-40 stands 15 meters tall and pushes a standard 5-ton cone into the seafloor. It is remotely controlled with an electronic unit on the deck of the support vessel. All cone outputs are recorded directly as a function of penetration depth with a strip chart recorder. A full suite of gauges is provided. on the electronic unit for monitoring the XSP-40's performance during a test .. About 40 penetration tests have been performed with very good success. The XSP-40 was field tested in Norton Sound, off the west coast of Alaska. The general objective, in addition to evaluation of the device, was to gather geotechnical information on sediments that may be involved in processes potentially hazardous to offshore development. Four example penetration records are presented from gas charged sediment zones and areas near the Yukon River delta. In general it was determined that soil classification from cone data agreed well with classifications from core samples. Relative densities of the silt-sand to sandy-silt soils were usually very high. The significance of these results are discussed with respect to storm wave, liquefaction. It is concluded that the XSP-40 is a durable and reliable piece of equipment capable of achieving penetration beyond that possible when not using the water jet system.

Proceedings of the Offshore Technology Conference↗
USGS1994

Field performance of an acoustic scour-depth monitoring system

The Herbert C. Bonner Bridge over Oregon Inlet serves as the only land link between Bodie and Hatteras Islands, part of the Outer Banks of North Carolina. Periodic soundings over the past 30 years have documented channel migration, local scour, and deposition at several pilings that support the bridge. In September 1992, a data-collection system was installed to permit the off-site monitoring of scour at 16 bridge pilings. The system records channel-bed elevations at 15-minute intervals and transmits the data to a satellite receiver. A cellular phone connection also permits downloading and reviewing of the data as they are being collected. A digitally recording, acoustic fathometer is the main component of the system. In November 1993, current velocity, water-surface elevation, wave characteristics, and water temperature measuring instruments were also deployed at the site. Several performance problems relating to the equipment and to the harsh marine environment have not been resolved, but the system has collected and transmitted reliable scour-depth and water-level data.

Conference Paper↗
USGS2012

Sea-floor geology in central Rhode Island Sound south of Sakonnet Point, Rhode Island

The U.S. Geological Survey (USGS) and the National Oceanic and Atmospheric Administration (NOAA) are working together to study the sea floor along the northeastern coast of the United States. NOAA collected multibeam-echosounder data during hydrographic survey H11995 in a 63-square-kilometer area in central Rhode Island Sound, south of Sakonnet Point, Rhode Island. The USGS collected sediment samples, bottom video, and still photographs from 27 stations in this study area to verify an interpretation of the bathymetric data. Collected data are used to map areas of scour depressions and erosional outliers, megaripples, boulders, and relatively undisturbed modern marine sediments. In general, much of the eastern part of the study area, a submerged segment of the Harbor Hill-Roanoke Point-Charlestown-Buzzards Bay moraine, is bouldery. Bottom photography shows boulders are generally encrusted with hydrozoans, algae, and anemone. Scour depressions, presumably formed by long-period storm waves, and erosional outliers of Holocene sediments dominate the western part of the study area and several large areas in the east. The scour depressions tend to have coarser grained sediment than intervening erosional outliers. The coarseness likely creates turbulence in the water over these areas, which prevents fine-grained sediment deposition. Several small areas of megaripples are visible in the bathymetry data in the west. Other sandy areas are typically rippled, with burrows, worm tubes, and starfish present.

Rhode Island↗
USGS1980

Geophysical investigations in deep horizontal holes drilled ahead of tunnelling

Deep horizontal drill holes have been used since 1967 by the Defense Nuclear Agency as a primary exploration tool for siting nuclear events in tunnels at the Nevada Test Site. The U.S. Geological Survey had developed geophysical logging techniques for obtaining resistivity and velocity in these holes, and to date 33 horizontal drill holes in excess of 300 m in depth have been successfully logged. The deepest hole was drilled to a horizontal depth of 1125 m. The purposes of the logging measurements are to define clay zones, because of the unstable ground conditions such zones can present to tunnelling, and to define zones of partially saturated rock, because of the attenuating effects such zones have on the shock wave generated by the nuclear detonation. Excessive attenuation is undesirable because the shock wave is used as a tunnel closure mechanism to contain debris and other undesirable explosion products. Measurements are made by pumping resistivity, sonic and geophone probes down the drill string and out of the bit into the open hole. Clay zones are defined by the electrical resistivity technique based on empirical data relating the magnitude of the resistivity measurement to qualitative clay content. Rock exhibiting resistivity of less than 20 ??-m is considered potentially unstable, and resistivities less than 10 ??-m indicate appreciable amounts of clay are present in the rock. Partially saturated rock zones are defined by the measurement of the rock sound speed. Zones in the rock which exhibit velocities less than 2450 m/sec are considered of potential concern. ?? 1980.

International Journal of Rock Mechanics and Mining↗
USGS2025

A soil velocity model for improved ground motion simulations in the U. S. Pacific Northwest

Near-surface seismic velocity structure may significantly impact the intensity, duration, and frequency content of ground shaking during an earthquake. In this study, we compile 649 shear wave velocity (Vs) profiles throughout the U.S. Pacific Northwest and southern British Columbia (PNW) and use these measured profiles to develop a representative soil velocity model for four major Holocene soil provinces: Puget Lowlands, Willamette Valley, fill and alluvium, and `other' soils. The resulting soil velocity model shows good agreement to measured data for a wide range of site conditions, with variability between different geologic domains reflecting fundamental differences in depositional environments. We then show that using this regional soil velocity model in simulations of the 2001 M6.8 Nisqually, Washington earthquake improves the fit to observed high-frequency (≥ 0.5 Hz) ground motions in the Puget Sound region compared to simulations that do not incorporate shallow (≤ 200 m) seismic velocity structure. Overall, this work shows that incorporating localized soil velocity profiles into seismic velocity models is important for accurately estimating high-frequency ground motion and regional seismic hazard in earthquake simulations. Future earthquake simulations and hazard studies in the PNW could incorporate these soil velocity profiles to capture the region's distinct site response characteristics.

Washington↗
USGS2015

Hindcast storm events in the Bering Sea for the St. Lawrence Island and Unalakleet Regions, Alaska

This study provides viable estimates of historical storm-induced water levels in the coastal communities of Gambell and Savoonga situated on St. Lawrence Island in the Bering Sea, as well as Unalakleet located at the head of Norton Sound on the western coast of Alaska. Gambell, Savoonga, and Unalakleet are small Native Villages that are regularly impacted by coastal storms but where little quantitative information about these storms exists. The closest continuous water-level gauge is at Nome, located more than 200 kilometers from both St. Lawrence Island and Unalakleet. In this study, storms are identified and quantified using historical atmospheric and sea-ice data and then used as boundary conditions for a suite of numerical models. The work includes storm-surge (temporary rise in water levels due to persistent strong winds and low atmospheric pressures) modeling in the Bering Strait region, as well as modeling of wave runup along specified sections of the coast in Gambell and Unalakleet. Modeled historical water levels are used to develop return periods of storm surge and storm surge plus wave runup at key locations in each community. It is anticipated that the results will fill some of the data void regarding coastal flood data in western Alaska and be used for production of coastal vulnerability maps and community planning efforts.

Alaska↗
USGS2015

A robust calibration technique for acoustic emission systems based on momentum transfer from a ball drop

We describe a technique to estimate the seismic moment of acoustic emissions and other extremely small seismic events. Unlike previous calibration techniques, it does not require modeling of the wave propagation, sensor response, or signal conditioning. Rather, this technique calibrates the recording system as a whole and uses a ball impact as a reference source or empirical Green’s function. To correctly apply this technique, we develop mathematical expressions that link the seismic moment $M_{0}$ of internal seismic sources (i.e., earthquakes and acoustic emissions) to the impulse, or change in momentum $\Delta p $, of externally applied seismic sources (i.e., meteor impacts or, in this case, ball impact). We find that, at low frequencies, moment and impulse are linked by a constant, which we call the force‐moment‐rate scale factor $C_{F\dot{M}} = M_{0}/\Delta p$. This constant is equal to twice the speed of sound in the material from which the seismic sources were generated. Next, we demonstrate the calibration technique on two different experimental rock mechanics facilities. The first example is a saw‐cut cylindrical granite sample that is loaded in a triaxial apparatus at 40 MPa confining pressure. The second example is a 2 m long fault cut in a granite sample and deformed in a large biaxial apparatus at lower stress levels. Using the empirical calibration technique, we are able to determine absolute source parameters including the seismic moment, corner frequency, stress drop, and radiated energy of these magnitude −2.5 to −7 seismic events.

Bulletin of the Seismological Society of America↗
USGS1984

Seismicity at Old Faithful Geyser: an isolated source of geothermal noise and possible analogue of volcanic seismicity

Old Faithful Geyser in Yellowstone National Park, U.S.A., is a relatively isolated source of seismic noise and exhibits seismic behavior similar to that observed at many volcanoes, including "bubblequakes" that resemble B-type "earthquakes", harmonic tremor before and during eruptions, and periods of seismic quiet prior to eruptions. Although Old Faithful differs from volcanoes in that the conduit is continuously open, that rock-fracturing is not a process responsible for seismicity, and that the erupting fluid is inviscid H2O rather than viscous magma, there are also remarkable similarities in the problems of heat and mass recharge to the system, in the eruption dynamics, and in the seismicity. Water rises irregularly into the immediate reservoir of Old Faithful as recharge occurs, a fact that suggests that there are two enlarged storage regions: one between 18 and 22 m (the base of the immediate reservoir) and one between about 10 and 12 m depth. Transport of heat from hot water or steam entering at the base of the recharging water column into cooler overlying water occurs by migration of steam bubbles upward and their collapse in the cooler water, and by episodes of convective overturn. An eruption occurs when the temperature of the near-surface water exceeds the boiling point if the entire water column is sufficiently close to the boiling curve that the propagation of pressure-release waves (rarefactions) down the column can bring the liquid water onto the boiling curve. The process of conversion of the liquid water in the conduit at the onset of an eruption into a two-phase liquid-vapor mixture takes on the order of 30 s. The seismicity is directly related to the sequence of filling and heating during the recharge cycle, and to the fluid mechanics of the eruption. Short (0.2-0.3 s), monochromatic, high-frequency events (20-60 Hz) resembling unsustained harmonic tremor and, in some instances, B-type volcanic earthquakes, occur when exploding or imploding bubbles of steam cause transient vibrations of the fluid column. The frequency of the events is determined by the length of the water column and the speed of sound of the fluid in the conduit when these events occur; damping is controlled by the characteristic and hydraulic impedances, which depend on the above parameters, as well as on the recharge rate of the fluid. Two periods of reduced seismicity (of a few tens of seconds to nearly a minute in duration) occur during the recharge cycle, apparently when the water rises rapidly through the narrow regions of the conduit, causing a sudden pressure increase that temporarily suppresses steam bubble formation. A period of decreased seismicity also precedes preplay or an eruption; this appears to be the time when rising steam bubbles move into a zone of boiling that is acoustically decoupled from the wall of the conduit because of the acoustic impedance mismatch between boiling water (??c ??? 103 g cm-2 s-1) and rock (??c ??? 3 ?? 105 g cm2 s-1). Sustained harmonic tremor occurs during the first one to one-and-a-half minutes of an eruption of Old Faithful, but is not detectable in the succeeding minutes of the eruption. The eruption tremor is caused by hydraulic transients propagating within a sublayer of unvesiculated water that underlies the erupting two-phase liquid-vapor mixture. The resonant frequencies of the fluid column decrease to about 1 Hz when all of the water in the conduit has been converted to a water-steam mixture. Surges are observed in the flow at this frequency, but the resonance has not been detected seismically, possibly because the two-phase erupting fluid is seismically decoupled from the rock on which seismometers are placed. If Old Faithful is an analogue for volcanic seismicity, this study shows that because the frequency of tremor depends on the acoustic properties of the fluid and on conduit dimensions, both properties must be considered in analysis of tremor in volcanic regions. Because magma sound

Journal of Volcanology and Geothermal Research↗
USGS2011

Sea-floor geology and topography offshore in Eastern Long Island Sound

A gridded multibeam bathymetric dataset covers approximately 133.7 square kilometers of sea floor offshore in eastern Long Island Sound. Although originally collected for charting purposes during National Oceanic and Atmospheric Administration hydrographic survey H11997, these acoustic data, and the sea-floor sampling and photography stations subsequently occupied to verify them during USGS cruise 2010-015-FA, are part of an expanding series of studies that provide a fundamental framework for research and resource management (for example, cables, pipelines, and dredging) activities in this major East Coast estuary. Results show the composition and terrain of the seabed and provide information on sediment transport and benthic habitat. Bedrock outcrops, erosional outliers, lag deposits of boulders, scour depressions, and extensive gravel pavements are common in the eastern part of the study area. These features, which result from the near-constant exposure to strong tidal currents, indicate sedimentary environments dominated by processes associated with erosion. Large fields of transverse and barchanoid sand waves in the western part of the study area reflect slightly lower energy levels and sedimentary environments where processes associated with coarse bedload transport prevail.

Open-File Report↗
USGS2021

Long-term changes in kelp forests in an inner basin of the Salish Sea

Kelp forests form an important biogenic habitat that responds to natural and human drivers. Global concerns exist about threats to kelp forests, yet long-term information is limited and research suggests that trends are geographically distinct. We examined distribution of the bull kelp Nereocystis luetkeana over 145 years in South Puget Sound (SPS), a semi-protected inner basin in a fjord estuary complex in the northeast Pacific Ocean. We synthesized 48 historical and modern Nereocystis surveys and examined presence/absence within 1-km segments along 452 km of shoreline. Compared to the earliest baseline in 1878, Nereocystis extent in 2017 decreased 63%, with individual sub-basins showing up to 96% loss. Losses have persisted for decades, across a range of climate conditions. In recent decades, Nereocystis predominantly occurred along shorelines with intense currents and mixing, where temperature and nutrient concentrations did not reach thresholds for impacts to Nereocystis performance, and high current speeds likely excluded grazers. Losses predominated in areas with elevated temperature, lower nutrient concentrations, and relatively low current velocities. The pattern of long-term losses in SPS contrasts with stability in floating kelp abundance during the last century in an area of the Salish Sea with greater wave exposure and proximity to oceanic conditions. These findings support the hypothesis that kelp beds along wave-sheltered shorelines exhibit greater sensitivity to environmental stressors. Additionally, shorelines with strong currents and deep-water mixing may provide refugia within sheltered systems.

Washington↗
USGS2011

Coastal habitats of the Elwha River, Washington- Biological and physical patterns and processes prior to dam removal

This report includes chapters that summarize the results of multidisciplinary studies to quantify and characterize the current (2011) status and baseline conditions of the lower Elwha River, its estuary, and the adjacent nearshore ecosystems prior to the historic removal of two long-standing dams that have strongly influenced river, estuary, and nearshore conditions. The studies were conducted as part of the U.S. Geological Survey Multi-disciplinary Coastal Habitats in Puget Sound (MD-CHIPS) project. Chapter 1 is the introductory chapter that provides background and a historical context for the Elwha River dam removal and ecosystem restoration project. In chapter 2, the volume and timing of sediment delivery to the estuary and nearshore are discussed, providing an overview of the sediment stored in the two reservoirs and the expected erosion mechanics of the reservoir sediment deposits after removal of the dams. Chapter 3 describes the geological background of the Olympic Peninsula and the geomorphology of the Elwha River and nearshore. Chapter 4 details a series of hydrological data collected by the MD-CHIPS Elwha project. These include groundwater monitoring, surface water-groundwater interactions in the estuary, an estimated surface-water budget to the estuary, and a series of temperature and salinity measurements. Chapter 5 details the work that has been completed in the nearshore, including the measurement of waves, tides, and currents; the development of a numerical hydrodynamic model; and a description of the freshwater plume entering the Strait of Juan de Fuca. Chapter 6 includes a characterization of the nearshore benthic substrate developed using sonar, which formed a habitat template used to design scuba surveys of the benthic biological communities. Chapter 7 describes the ecological studies conducted in the lower river and estuary and includes characterization of juvenile salmon diets and seasonal estuary utilization patterns using otolith analysis to determine habitat specific and hatchery compared with wild patterns in juvenile Chinook salmon, assessment of benthic and terrestrial macroinvertebrate communities, and seasonal patterns of water nutrients. In Chapter 8, the vegetation communities of the eastern estuary are characterized by mapped vegetation cover types and samples collected for vegetation composition and diversity. Chapter 9 summarizes the existing conditions of the study area as detailed in this report and describes some of the possible outcomes of river restoration on the coastal ecosystems of the Elwha River. Together, these different scientific perspectives form a basis for understanding the Elwha River ecosystem, an environment that has and will undergo substantial change. A century of change began with the start of dam construction in 1910; additional major change will result from dam removal scheduled to begin in September 2011. This report provides a scientific snapshot of the lower Elwha River, its estuary, and adjacent nearshore ecosystems prior to dam removal that can be used to evaluate the responses and dynamics of various system components following dam removal.

Scientific Investigations Report↗
USGS2014

Source and progression of a submarine landslide and tsunami: The 1964 Great Alaska earthquake at Valdez

Like many subduction zone earthquakes, the deadliest aspects of the 1964 M = 9.2 Alaska earthquake were the tsunamis it caused. The worst of these were generated by local submarine landslides induced by the earthquake. These caused high runups, engulfing several coastal towns in Prince William Sound. In this paper, we study one of these cases in detail, the Port Valdez submarine landslide and tsunami. We combine eyewitness reports, preserved film, and careful posttsunami surveys with new geophysical data to inform numerical models for landslide tsunami generation. We review the series of events as recorded at Valdez old town and then determine the corresponding subsurface events that led to the tsunami. We build digital elevation models of part of the pretsunami and posttsunami fjord‐head delta. Comparing them reveals a ~1500 m long region that receded 150 m to the east, which we interpret as the primary delta landslide source. Multibeam imagery and high‐resolution seismic reflection data identify a ~400 m wide chute with hummocky deposits at its terminus, which may define the primary slide path. Using these elements we run hydrodynamic models of the landslide‐driven tsunamis that match observations of current direction, maximum inundation, and wave height at Valdez old town. We speculate that failure conditions at the delta front may have been influenced by manmade changes in drainage patterns as well as the fast retreat of Valdez and other glaciers during the past century.

Alaska↗
USGS1966

Effects of the earthquake of March 27, 1964, in the Copper River Basin area, Alaska

The Copper River Basin area is in south-central Alaska and covers 17,800 square miles. It includes most of the Copper River Basin and parts of the surrounding Alaska Range and the Talkeetna, Chugach, and Wrangell Mountains. On March 27, 1964, shortly after 5:36 p.m. Alaska standard time, a great earthquake having a Richter magnitude of about 8.5 struck south-central Alaska. Computations by the U.S. Coast and Geodetic Survey place the epicenter of the main shock at lat 61.1° N. and long 147.7° W., and the hypocenter, or actual point of origin, from 20 to 50 kilometers below the surface. The epicenter is near the western shore of Unakwik Inlet in northern Prince William Sound; it is 30 miles from the closest point within the area of study and 180 miles from the farthest point. Releveling data obtained in 1964 after the earthquake indicates that broad areas of south-central Alaska were warped by uplift and subsidence. The configuration of these areas generally parallels the trend of the major tectonic elements of the region. Presumably a large part of this change took place during and immediately after the 1964 earthquake. The water level in several wells in the area lowered appreciably, and the water in many became turbid; generally, however, within a few days after the earthquake the water level returned to normal and the suspended sediment settled out. Newspaper reports that the Copper River was completely dammed and Tazlina Lake drained proved erroneous. The ice on most lakes was cracked, especially around the margins of the lakes where floating ice broke free from the ice frozen to the shore. Ice on Tazlina, Klutina, and Tonsina Lakes was intensely fractured by waves generated by sublacustrine landslides off the fronts of deltas. These waves stranded large blocks of ice above water level along the shores. River ice was generally cracked in the southern half of the area and was locally cracked in the northern half. In the area of study, the majority of the ground cracks occurred within a radius of 100 miles from the epicenter of the earthquake. Ground cracks formed in flood plains of rivers, in deltas, and along the toes of alluvial fans. They also occurred locally in low terraces adjacent to flood plains, in highway and other fill material, along the margins of lakes, along the faces of steep slopes of river bluffs and hillsides, and in areas cleared of vegetation for several years. The ground cracks were restricted to areas underlain by unconsolidated deposits where one or more of the following conditions existed: (1) permafrost was absent or deep lying, (2) the ground-water table was near the surface, (3) bedrock was relatively deep lying, and (4) slopes were steep. Because the earthquake occurred in March, seasonal frost was present throughout the area. Despite the diversity of local conditions, the origin of most of the ground cracks can be explained by the following mechanisms: (1) lateral extension, caused by materials moving toward an unconfined face such as a lakeshore, river bluff, hillside, or terrace escarpment; (2) horizontal compaction, caused by repeated alternate compression and dilation (in the horizontal direction) of materials in flat-lying areas where there are no unconfined faces; (3) differential vertical compaction, caused by the shaking of materials that vary laterally in thickness or character; and (4) combinations of the above. Snowslides, avalanches, and rockslides were restricted to the mountainous areas surrounding the Copper River Basin. They were especially numerous in the Chugach Mountains which are closest to the epicenter of the earthquake. The large amount of snow and rock debris that has cascaded onto the icefield and glaciers of these mountains, and, probably even more important, the overall disturbance to the ice field will affect the regimen of the glaciers. Most of the damage to manmade structures occurred in the southern half of the area, and, primarily because of the sparsity of population and manmade structures, property damage was not great and no lives were lost.

Alaska↗
USGS1991

Late Quaternary stratigraphy and depositional history of the Long Island Sound basin

The stratigraphy of Late Quaternary geologic units beneath Long Island Sound (LIS) is interpreted from 3,500 km of high-resolution, seismic-reflection profiles supplemented by vibracore data. Knowledge gained from onshore regional geologic studies and previous offshore investigations is also incorporated in these interpretations. Glacial deposits overlie and nearly fill an Inner Lowland which is floored by crystalline rocks in the north and bounded to the south by an irregular, north-facing cuesta scarp in Cretaceous Coastal-Plain strata. The thick glacial section consists largely of sediment that was deposited in glacial Lake Connecticut during the retreat of the last (late Wisconsin) ice sheet. Ice-marginal lacustrine fan deposits and submerged extensions of the southeastern Connecticut recessional moraines mark positions of the ice margin during systematic northward retreat. When the ice margin stood at positions just north of the present shoreline of Connecticut (17.6-16.5 ka), glacial Lake Connecticut was slightly larger than Long Island Sound is today. Ice-marginal deltas and near-ice marginal fluviodeltaic deposits occur along coastal Connecticut. Delta-building was diachronous; progressively younger deltas record northwesterly retreat of the ice margin and lowering lake levels. Distally from the deltas, varied lake-clays (up to 150 m thick) drape the underlying topography. The lake spillway cut across the Harbor Hill-Roanoke Point-Fishers Island-Charlestown end moraine at its lowest point just west of Fishers Island (The Race). Lake levels fell as the spillway notch was erosionally deepened, and gradually the lakebed became subaerially exposed. A largely preserved channel system cuts the lake-deposit surface; fluvial channel-fill sediments are overlain by estuarine sediments in the channel system. Perhaps as early as 15 ka, but no later than 13 ka, the sea entered the Basin through the channel at The Race and quickly transgressed westward via the lakebed channel system. As the sea rose further and spread throughout the Basin, a wave-cut surface was formed. Extensive marine deltaic deposits, up to 40 m thick, overlie the wave-cut marine unconformity in the east-central part of the Basin. These sediments were derived from erosion of the drained bed of Lake Hitchcock, in the Connecticut valley to the north, and were deposited in a -40-m relative sea at about 12.4 ka. Where quiet waters prevail, marine mud generally less than 15 m thick blankets the older deposits of the Basin. Elsewhere, especially in eastern LIS, tidal currents are actively reworking and transporting glacial and postglacial deposits.

Connecticut, New York↗
USGS1992

Sedimentology, behavior, and hazards of debris flows at Mount Rainier, Washington

Mount Rainier is potentially the most dangerous volcano in the Cascade Range because of its great height, frequent earthquakes, active hydrothermal system, and extensive glacier mantle. Many debris flows and their distal phases have inundated areas far from the volcano during postglacial time. Two types of debris flows, cohesive and noncohesive, have radically different behavior that relates empirically to clay content. The two types represent the observable end members of a continuum of debris flow characteristics at Mount Rainier. Cohesive flows exhibit behavior affected by the cohesion and adhesion of particles; noncohesive flows are dominated by particle collisions to the extent of extensive particle cataclasis during near-boundary shear. Cohesive debris flows contain more than 3 to 5 percent of clay-size sediment. The composition of these flows changed little during flow for more than 100 kilometers from Mount Rainier where they inundate parts of the now-populated Puget Sound Lowland. They originate as deep-seated failures of sectors of the volcanic edifice at a frequency indicating that such failures are the major destructional process of its morphologic evolution. In several deposits of large cohesive flows, a lateral, megaclast-bearing facies (with a mounded or hummocky surface) contrasts with a more clay-rich facies in the center of valleys and downstream. Cohesive flows at Mount Rainier do not correlate strongly with volcanic activity and thus can recur without warning, possibly triggered by nonmagmatic seismicity or by destabilization associated with the hydrothermal system. Noncohesive debris flows contain less than 3 to 5 percent of clay-size sediment. They form most commonly by hulking of sediment in water surges, but some originate directly or indirectly from shallow slope failures that do not penetrate the hydrothermally altered core of the volcano. In contrast with cohesive flows, most noncohesive flows transform both from and to other flow types, so that the debris flows are the middle segments of flow waves beginning and ending as flood surges. Proximally, through the bulking of poorly sorted, volcaniclastic debris on the flanks of the volcano, flow waves expand rapidly in volume by transforming from water surges through hyperconcentrated streamflow (20 to 60 percent sediment by volume) to debris flow. Distally, the transformations occur more slowly in reverse order--from debris flow, to hyperconcentrated flow, and finally to normal streamflow with less than 20 percent sediment by volume. During runout of the largest noncohesive flows, hyperconcentrated flow has occurred for as much as 40 to 70 kilometers. Lahars (volcanic debris flows and their deposits) occurred at Mount Rainier throughout later postglacial time and not as groups of closely time-related flows during discrete eruptive periods as at Mount St. Helens. An exception is a period of large noncohesive flows during and after construction of the modern summit cone. Laharrunout flows, the hyperconcentrated flows forming the distal phases of lahars, document the frequency and extent of noncohesive lahars. Deposits record the following transformations of debris flows: (1) the direct, progressive dilution of debris flow to hyperconcentrated flow, (2) deposition of successively finer grained lobes of debris until only the hyperconcentrated tail of the flow remains to continue downstream, and (3) dewatering of coarse debris flow deposits to yield fine-grained debris flow or hyperconcentrated flow. Three planning or design case histories represent different lengths of postglacial time. Case I is representative of large, infrequent (500 to 1,000 years on average) cohesive debris flows. These flows need to be considered in long-term planning in valleys around the volcano. Case II generalizes the noncohesive debris flows of intermediate size and recurrence (100 to 500 years). This case is appropriate for consideration in some structural design. Case III flows are relatively small but more frequent (less than 100 years on average).

Washington↗