SEARCH · Search USGS

Results for “Open File Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources

USGS2010

Mars Global Digital Dune Database; MC-1

The Mars Global Digital Dune Database presents data and describes the methodology used in creating the global database of moderate- to large-size dune fields on Mars. The database is being released in a series of U.S. Geological Survey (USGS) Open-File Reports. The first release (Hayward and others, 2007) included dune fields from 65 degrees N to 65 degrees S (http://pubs.usgs.gov/of/2007/1158/). The current release encompasses ~ 845,000 km2 of mapped dune fields from 65 degrees N to 90 degrees N latitude. Dune fields between 65 degrees S and 90 degrees S will be released in a future USGS Open-File Report. Although we have attempted to include all dune fields, some have likely been excluded for two reasons: (1) incomplete THEMIS IR (daytime) coverage may have caused us to exclude some moderate- to large-size dune fields or (2) resolution of THEMIS IR coverage (100m/pixel) certainly caused us to exclude smaller dune fields. The smallest dune fields in the database are ~ 1 km2 in area. While the moderate to large dune fields are likely to constitute the largest compilation of sediment on the planet, smaller stores of sediment of dunes are likely to be found elsewhere via higher resolution data. Thus, it should be noted that our database excludes all small dune fields and some moderate to large dune fields as well. Therefore, the absence of mapped dune fields does not mean that such dune fields do not exist and is not intended to imply a lack of saltating sand in other areas. Where availability and quality of THEMIS visible (VIS), Mars Orbiter Camera narrow angle (MOC NA), or Mars Reconnaissance Orbiter (MRO) Context Camera (CTX) images allowed, we classified dunes and included some dune slipface measurements, which were derived from gross dune morphology and represent the prevailing wind direction at the last time of significant dune modification. It was beyond the scope of this report to look at the detail needed to discern subtle dune modification. It was also beyond the scope of this report to measure all slipfaces. We attempted to include enough slipface measurements to represent the general circulation (as implied by gross dune morphology) and to give a sense of the complex nature of aeolian activity on Mars. The absence of slipface measurements in a given direction should not be taken as evidence that winds in that direction did not occur. When a dune field was located within a crater, the azimuth from crater centroid to dune field centroid was calculated, as another possible indicator of wind direction. Output from a general circulation model (GCM) is also included. In addition to polygons locating dune fields, the database includes THEMIS visible (VIS) and Mars Orbiter Camera Narrow Angle (MOC NA) images that were used to build the database. The database is presented in a variety of formats. It is presented as an ArcReader project which can be opened using the free ArcReader software. The latest version of ArcReader can be downloaded at http://www.esri.com/software/arcgis/arcreader/download.html. The database is also presented in an ArcMap project. The ArcMap project allows fuller use of the data, but requires ESRI ArcMap(Registered) software. A fuller description of the projects can be found in the NP_Dunes_ReadMe file (NP_Dunes_ReadMe folder_ and the NP_Dunes_ReadMe_GIS file (NP_Documentation folder). For users who prefer to create their own projects, the data are available in ESRI shapefile and geodatabase formats, as well as the open Geography Markup Language (GML) format. A printable map of the dunes and craters in the database is available as a Portable Document Format (PDF) document. The map is also included as a JPEG file. (NP_Documentation folder) Documentation files are available in PDF and ASCII (.txt) files. Tables are available in both Excel and ASCII (.txt)

Open-File Report↗

USGS2008

Digital data for volcano hazards in the Crater Lake Region, Oregon

Crater Lake lies in a basin, or caldera, formed by collapse of the Cascade volcano known as Mount Mazama during a violent, climactic eruption about 7,700 years ago. This event dramatically changed the character of the volcano so that many potential types of future events have no precedent there. This potentially active volcanic center is contained within Crater Lake National Park, visited by 500,000 people per year, and is adjacent to the main transportation corridor east of the Cascade Range. Because a lake is now present within the most likely site of future volcanic activity, many of the hazards at Crater Lake are different from those at most other Cascade volcanoes. Also significant are many faults near Crater Lake that clearly have been active in the recent past. These faults, and historic seismicity, indicate that damaging earthquakes can occur there in the future. The USGS Open-File Report 97-487 (Bacon and others, 1997) describes the various types of volcano and earthquake hazards in the Crater Lake area, estimates of the likelihood of future events, recommendations for mitigation, and a map of hazard zones. The geographic information system (GIS) volcano hazard data layers used to produce the Crater Lake earthquake and volcano hazard map in USGS Open-File Report 97-487 are included in this data set. USGS scientists created one GIS data layer, c_faults, that delineates these faults and one layer, cballs, that depicts the downthrown side of the faults. Additional GIS layers chazline, chaz, and chazpoly were created to show 1) the extent of pumiceous pyroclastic-flow deposits of the caldera forming Mount Mazama eruption, 2) silicic and mafic vents in the Crater Lake region, and 3)the proximal hazard zone around the caldera rim, respectively.

Open-File Report↗

USGS1990

U.S. Geological Survey applied research studies of the Cheyenne River System, South Dakota; description and collation of data, water years 1987-88

The Cheyenne River System in western South Dakota has been impacted by the discharge of about 100 million metric tons of gold-mill tailings to Whitewood Creek near Lead, South Dakota. In April 1985, the U.S. Geological Survey initiated an extensive series of research studies to investigate the magnitude of the impact and to define important processes acting on the contaminated sediments present in the system. The report presents all data collected during the 1987 and 1988 water years for these research studies. Some of the data included have been published previously. Data collected in the 1985 and 1986 water years have been published in a companion report (U.S. Geological Survey Open-File Report 88-484). Hydrologic, geochemical, and biologic data are available for sites on Whitewood Creek, and the Belle Fourche and Cheyenne Rivers. Data complexity varies from routine discharge and water-quality to very complex energy-dispersive x-ray analysis. Methods for sample collection, handling and preservation, and laboratory analysis are also presented. No interpretations or complex statistical summaries are included. (See also W89-08390) (USGS)

Open-File Report↗

USGS1993

Publications of the Branch of Atlantic Marine Geology for Calendar Year 1992

This U.S. Geological Survey Open-File Report contains a listing of publications authored or co-authored by members of the Branch of Atlantic Marine Geology and published in calendar year 1992. The Branch conducts a broad geologic and geophysical research and mapping program, primarily along the U.S. Atlantic Margin, in the Great Lakes, the Gulf of Mexico, the Caribbean and polar regions. A long range objective of this program is to develop a comprehensive understanding of the geology of the continental margin and a predictive capability to guide and assess the consequences of its use. Headquarters of the Branch of Atlantic Marine Geology are located in Woods Hole, MA., and personnel are located in Woods Hole, MA., St Petersburg, FL., Reston, VA., Denver, CO., and San Juan, Puerto Rico. A brochure describing the Branch of Atlantic Marine Geology may be obtained by writing to Chief, Branch of Atlantic Marine Geology, Quissett Campus, Woods Hole, MA 02543. Results of Branch investigations are distributed in a variety of ways, including maps, journal articles, abstracts and U.S.G.S. publications. Copies of U.S.G.S. Open File Reports may be obtained from the author. Book publications can be obtained from U.S. Geological Survey, Books and Reports Sales, Federal Center, Box 25425, Denver, CO 80225. Copies of U.S.G.S. Maps may be obtained from the U.S. Geological Survey, Map Sales, Federal Center, Box 25286, Denver, CO 80225.

Open-File Report↗

USGS1991

Publications of the Branch of Atlantic Marine Geology for Calendar Year 1990

This U.S. Geological Survey Open-File Report [extract] contains a listing of publications authored or co-authored by members of the Branch of Atlantic Marine Geology and published in calendar year 1990. The Branch conducts a broad geologic and geophysical research and mapping program, primarily along the U.S. Atlantic Margin, in the Great Lakes, the Gulf of Mexico, the Caribbean and polar regions. A long range objective of this program is to develop a comprehensive understanding of the geology of the continental margin and a predictive capability to guide and assess the consequences of its use. Headquarters of the Branch of Atlantic Marine Geology are located in Woods Hole, MA., and personnel are located in Woods Hole, MA., St Petersburg, FL., Reston, VA., Denver, CO., and San Juan, Puerto Rico. A brochure describing the Branch of Atlantic Marine Geology may be obtained by writing to Chief, Branch of Atlantic Marine Geology, Quissett Campus, Woods Hole, MA 02543. Results of Branch investigations are distributed in a variety of ways, including maps, journal articles, abstracts and U.S.G.S. publications. Copies of U.S.G.S. Open File Reports may be obtained from the author. Book publications can be obtained from U.S. Geological Survey, Books and Reports Sales, Federal Center, Box 25425, Denver, CO 80225. Copies of U.S.G.S. Maps may be obtained from the U.S. Geological Survey, Map Sales, Federal Center, Box 25286, Denver, CO 80225.

Open-File Report↗

USGS1994

Publications of the Branch of Atlantic Marine Geology for Calendar Year 1993

This U.S. Geological Survey Open-File Report [extract] contains a listing of publications authored or co-authored by members of the Branch of Atlantic Marine Geology and published in calendar year 1993. The Branch conducts a broad geologic and geophysical research and mapping program, primarily along the U.S. Atlantic Margin, in the Great Lakes, the Gulf of Mexico, the Caribbean and polar regions. A long range objective of this program is to develop a comprehensive understanding of the geology of the continental margin and a predictive capability to guide and assess the consequences of its use. Headquarters of the Branch of Atlantic Marine Geology are located in Woods Hole, MA., and personnel are located in Woods Hole, MA., St Petersburg, FL., Reston, VA., Denver, CO., and San Juan, Puerto Rico. A brochure describing the Branch of Atlantic Marine Geology may be obtained by writing to Chief, Branch of Atlantic Marine Geology, Quissett Campus, Woods Hole, MA 02543. Results of Branch investigations are distributed in a variety of ways, including maps, journal articles, abstracts and U.S.G.S. publications. Copies of U.S.G.S. Open File Reports may be obtained from the author. Book publications can be obtained from U.S. Geological Survey, Books and Reports Sales, Federal Center, Box 25425, Denver, CO 80225. Copies of U.S.G.S. Maps may be obtained from the U.S. Geological Survey, Map Sales, Federal Center, Box 25286, Denver, CO 80225.

Open-File Report↗

USGS1983

Nevada - basic data for thermal springs and wells as recorded in Geotherm; Part A

GEOTHERM, a computerized information system now off-line, was used to maintain data on the geology, geochemistry and hydrology of geothermal sites primarily within the United States. The system was proposed at the First Geothermal Implementation Conference in New Zealand in 1974 (Swanson, 1977) and was active until 1983. The primary mission was to provide a broad informational framework for the Geothermal Research Program (Duffield and Guffanti, 1981). GEOTHERM was used to support national geothermal assessments--in 1978 (Muffler, 1979) and 1982 (Reed, 1983). It was however a public system and provided data to both public and private sectors. A detailed discussion on databases in GEOTHERM and a general scheme of how the information system operated can be found in Bliss and Rapport (1983). This report on Nevada is one of a series intended to preserve the data collected for GEOTHERM and make the data available to the public. This report will give summaries and sources of records for Nevada. The complete records for Nevada can be found in a companion report, U.S. Geological Survey Open-File Report 83-433B, which is issued as MICROFICHE ONLY. States with significant geochemical data for geothermal fluids will be covered in individual reports such as this. A report will also be issued to cover miscellaneous data collected for sites in the central and eastern United States. The data presented this series is also available as a data file on the internationally-available General Electric Mark III service, a timeshare network. Those interested in accessing that system should contact the Energy Resource Center, University of Oklahoma, Norman, Oklahoma 73070. It is anticipated that a portion of the data will also be available on magnetic tape from the National Technical Information Service, U. S. Department of Commerce, Springfield, VA 22161. It will not be available until after the completion of the open-file series.

Nevada↗

USGS2010

Digital map of the aquifer boundary for the High Plains aquifer in parts of Colorado, Kansas, Nebraska, New Mexico, Oklahoma, South Dakota, Texas, and Wyoming

This digital data set represents the extent of the High Plains aquifer in the central United States. The extent of the High Plains aquifer covers 174,000 square miles in eight states: Colorado, Kansas, Nebraska, New Mexico, Oklahoma, South Dakota, Texas, and Wyoming. This data set represents a compilation of information from digital and paper sources and personal communication. This boundary is an update to the boundary published in U.S. Geological Survey Professional Paper 1400-B, and this report supersedes Open-File Report 99-267. The purpose of this data set is to refine and update the extent of the High Plains aquifer based on currently available information. This data set represents a compilation of arcs from a variety of sources and scales that represent the 174,000 square-mile extent of the High Plains aquifer within the eight states. Where updated information was not available, the original boundary extent defined by OFR 99-267 was retained. The citations for the sources in each State are listed in the 00README.txt file. The boundary also contains internal polygons, or 'islands', that represent the areas within the aquifer boundary where the aquifer is not present due to erosion or non-deposition. The datasets that pertain to this report can be found on the U.S. Geological Survey's NSDI (National Spatial Data Infrastructure) Node, the links are provided on the sidebar.

Colorado, Kansas, Nebraska, New Mexico, Oklahoma, ↗

USGS2011

Geophysical data collected from the St. Clair River between Michigan and Ontario, Canada (2008-016-FA)

In 2008, the U.S. Geological Survey (USGS), Woods Hole Coastal and Marine Science Center (WHCMSC), in cooperation with the U.S. Army Corps of Engineers conducted a geophysical and sampling survey of the riverbed of the Upper St. Clair River between Port Huron, Mich., and Sarnia, Ontario, Canada. The objectives were to define the Quaternary geologic framework of the riverbed of the St. Clair River to evaluate the relationship between morphologic change of the riverbed and underlying stratigraphy. This report presents the geophysical and sample data collected from the St. Clair River, May 29-June 6, 2008, as part of the International Upper Great Lakes Study, a 5-year project funded by the International Joint Commission of the United States and Canada to examine whether physical changes in the St. Clair River are affecting water levels within upper Great Lakes, to assess regulation plans for outflows from Lake Superior, and to examine the potential effect of climate change on the Great Lakes water levels (http://www.iugls.org). This document makes available the data that were used in a separate report, U.S. Geological Survey Open-File Report 2009-1137, which detailed the interpretations of the Quaternary geologic framework of the region. This report includes a description of the high-resolution acoustic and sediment-sampling systems that were used to map the morphology, surficial sediment distribution, and underlying geology of the Upper St. Clair River during USGS field activity 2008-016-FA (http://quashnet.er.usgs.gov/cgi-bin/datasource/public_ds_info.pl?fa=2008-016-FA). Video and photographs of the riverbed were also collected and are included in this data release. Future analyses will be focused on substrate erosion and its effects on river-channel morphology and geometry. Ultimately, the International Upper Great Lakes Study will attempt to determine where physical changes in the St. Clair River affect water flow and, subsequently, water levels in the Upper Great Lakes.

Open-File Report↗

USGS2000

Digital geologic map of the Butler Peak 7.5' quadrangle, San Bernardino County, California

Open-File Report 00-145, is a digital geologic map database of the Butler Peak 7.5' quadrangle that includes (1) ARC/INFO ( Environmental Systems Research Institute ) version 7.2.1 Patch 1 coverages, and associated tables, (2) a Portable Document Format (.pdf) file of the Description of Map Units, Correlation of Map Units chart, and an explanation of symbols used on the map, btlrpk_dcmu.pdf, (3) a Portable Document Format file of this Readme, btlrpk_rme.pdf (the Readme is also included as an ascii file in the data package), and (4) a PostScript plot file of the map, Correlation of Map Units, and Description of Map Units on a single sheet, btlrpk.ps. No paper map is included in the Open-File report, but the PostScript plot file (number 4 above) can be used to produce one. The PostScript plot file generates a map, peripheral text, and diagrams in the editorial format of USGS Geologic Investigation Series (I-series) maps.

California↗

USGS1992

The digital geologic map of Colorado in ARC/INFO format: Part A. Documentation

This geologic map was prepared as a part of a study of digital methods and techniques as applied to complex geologic maps. The geologic map was digitized from the original scribe sheets used to prepare the published Geologic Map of Colorado (Tweto 1979). Consequently the digital version is at 1:500,000 scale using the Lambert Conformal Conic map projection parameters of the state base map. Stable base contact prints of the scribe sheets were scanned on a Tektronix 4991 digital scanner. The scanner automatically converts the scanned image to an ASCII vector format. These vectors were transferred to a VAX minicomputer, where they were then loaded into ARC/INFO. Each vector and polygon was given attributes derived from the original 1979 geologic map. This database was developed on a MicroVAX computer system using VAX V 5.4 nd ARC/INFO 5.0 software. UPDATE: April 1995, The update was done solely for the purpose of adding the abilitly to plot to an HP650c plotter. Two new ARC/INFO plot AMLs along with a lineset and shadeset for the HP650C design jet printer have been included. These new files are COLORADO.650, INDEX.650, TWETOLIN.E00 and TWETOSHD.E00. These files were created on a UNIX platform with ARC/INFO 6.1.2. Updated versions of INDEX.E00, CONTACT.E00, LINE.E00, DECO.E00 and BORDER.E00 files that included the newly defined HP650c items are also included. * Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Descriptors: The Digital Geologic Map of Colorado in ARC/INFO Format Open-File Report 92-050

Colorado↗

USGS1992

The digital geologic map of Colorado in ARC/INFO format, Part B. Command files

Colorado↗

USGS1992

The digital geologic map of Colorado in ARC/INFO format

Colorado↗

USGS1993

GKS-PC; a kernel graphics programming system for IBM-PC and compatible microcomputers

GKS-PC is a Graphical Kernel System for the family of microcomputers compatible with the IBM-PC/MS-DOS standard. This library of functions allows an application program to control a computer graphics display conforming to a variety of graphics display standards. GKS-PC contains a subset of the GKS system of graphics primitive functions. GKS is an ANSI standardized computer graphics software development environment. General descriptions of GKS are in the references (American National Standards Committee X3, 1984) and (Hopgood et.al., 1983) listed on page 52. GKS-PC is not a comprehensive package for producing commercial grade graphics software, and it is not a general animation environment even though certain kinds of animation are possible with this software. The 5.25" diskette containing the GKS-PC object library files and installation program is available as Open-File Report 93-241-B.

Open-File Report↗

USGS1996

Computer input and output files associated with ground-water-flow simulations of the Albuquerque Basin, central New Mexico, 1901-95, with projections to 2020; (supplement three to U.S. Geological Survey Water-resources investigations report 94-4251)

This report presents the computer input files required to run the three-dimensional ground-water-flow model of the Albuquerque Basin, central New Mexico, documented in Kernodle and others (Kernodle, J.M., McAda, D.P., and Thorn, C.R., 1995, Simulation of ground-water flow in the Albuquerque Basin, central New Mexico, 1901-1994, with projections to 2020: U.S. Geological Survey Water-Resources Investigations Report 94-4251, 114 p.) and revised by Kernodle (Kernodle, J.M., 1998, Simulation of ground-water flow in the Albuquerque Basin, 1901-95, with projections to 2020 (supplement two to U.S. Geological Survey Water-Resources Investigations Report 94-4251): U.S. Geological Survey Open-File Report 96-209, 54 p.). Output files resulting from the computer simulations are included for reference.

Open-File Report↗

USGS2001

Digital geologic map of the Fawnskin 7.5' quadrangle, San Bernardino County, California

Version 1.1 of this Open-File Report contains a digital geologic map and map database of the Fawnskin 7.5' quadrangle, San Bernardino County, California, that includes: 1. ARC/INFO (Environmental Systems Research Institute) version 7.2.1 double-precision coverages of the various elements of the geologic map 2. A PostScript (.ps) file to plot the geologic map on a topographic base, containing a Correlation of Map Units diagram and a Description of Map Units 3. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in fskn_met.txt b. The same graphic as plotted in 2 above. (Test plots from this .pdf do not produce 1:24,000-scale maps. Adobe Acrobat page-size settings control map scale.) This release includes features not found in most other digital geologic maps, in that all polygons, lines, and points in the coverage are encoded with detailed, comprehensive geologic data contained in six INFO data tables (.rel). (See Matti and others, 1998a, 1998b, and 1998c, for information on how the encoding may be accessed and utilized.) No paper map is included in the Open-File Report, but a PostScript plot file containing an image of the geologic map sheet, topographic base, Correlation of Map Units (CMU), and detailed Description of Map Units (DMU) is. The Correlation of Map Units and Description of Map Units are in the editorial format of USGS Miscellaneous Investigations Series maps (I-maps) but have not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by such standard geologic-map criteria as formation name, age, and lithology. Even though this is an author-prepared report, every attempt has been made to closely adhere to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the PostScript file (2 above). If roads in some areas, especially roads that parallel topographic contours, do not show well on plots of the geologic map, we recommend use of the USGS Fawnskin 7.5' topographic quadrangle in conjunction with the geologic map.

California↗

USGS1979

Geologic description of selected strong-motion accelerograph sites, Part II

One of the major tasks of the U.S. Geological Survey as regards seismic engineering is the collection and dissemination of strong-motion accelerograph records. When analyzing these records certain information describing the instrument site is important: local geology; instrument housing (buildings, dams, bridges, instrument shelters, etc.); local topography; and proximity of an accelerograph to man-made structures that might influence the record. This report describes local geologic conditions of selected sites and is the second in a series of continuing reports covering strong-motion accelerograph sites in the western hemisphere. See Open File Report 78-1005 for part one.

Open-File Report↗

USGS1980

Instrument specifications and geophysical records for airborne electromagnetic survey of parts of Iron, Baraga, and Dickson Counties, Michigan

The data presented herein is from an airborne electromagnetic INPUT* survey conducted by Geoterrex Limited of Canada for the U.S. Geological Survey. The survey area is located in the central part of the Upper Peninsula of Michigan, within parts of Iron, Baraga, and Dickinson Counties. The general area covered is between 46°00' and 46°30' latitude and 88°00' and 88°30' longitude (fig. 1). The INPUT survey was flown as part of a U.S. Geological Survey CUSMAP (Conterminous United States Mineral Appraisal Program) project focusing on the Iron River 2° quadrangle. The survey was flown in order to provide geophysical information which will aid in an integrated geological assessment of mineral potentials of this part of the Iron River 2° quadrangle. The flight line spacing was chosen to maximize the areal coverage without a loss of resolution of major lithologic and structural features. East-west flight lines were flown 400 feet above ground at 1/2 mile intervals. Aerial photos were used for navigation, and the flight path was recorded on continuous-strip film. A continuously recording total field ground magnetic station was used to monitor variations in the Earth's magnetic field. One north-south line was flown to provide a tie for the magnetic data, which was recorded simultaneously with the electromagnetic data by a sensor mounted in the tail of the aircraft. This report is one of two open-file reports. The map in the other report Heran and Smith (1980) shows locations of the fiducial points, the flight lines, preliminary locations of anomalies and conductive zones; all plotted on an air photomosaic. The latitude and longitude ticks marked on this map are only approximate due to distortion in air photos used to recover the flight line position. This map is preliminary and is not to be considered a final interpretation. The present report contains a description of the instrument specifications, a copy of the ground station magnetic data, and a record of the electromagnetic and magnetic data, with reference to the digital data of the flight records. The purpose of two reports is to make the analog and magnetic records available separate from the anomaly map. The following sections on the general description of the INPUT system are abridged from a typical interpretation report prepared by Geoterrex Limited of Ottawa, Canada for the U.S. Geological Survey.

Michigan↗