Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Interpretation Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources
USGS1996

Cyclic stressing and seismicity at strongly coupled subduction zones

We use the finite element method to analyze stress variations in and near a strongly coupled subduction zone during an earthquake cycle. Deformation is assumed to be uniform along strike (plane strain on a cross section normal to the trench axis), and periodic earthquake slip is imposed consistent with the long-term rate of plate convergence and degree of coupling. Simulations of stress and displacement rate fields represent periodic fluctuations in time superimposed on an average field. The oceanic plate, descending slab, and continental lithosphere are assumed here to respond elastically to these fluctuations, and the remaining mantle under and between plates is assumed to respond as Maxwell viscoelastic. In the first part of the analysis we find that computed stress fluctuations in space and time are generally consistent with observed earthquake mechanism variations with time since a great thrust event. In particular, trench-normal extensional earthquakes tend to occur early in the earthquake cycle toward the outer rise but occur more abundantly late in the cycle in the subducting slab downdip of the main thrust zone. Compressional earthquakes, when they occur at all, have the opposite pattern. Our results suggest also that the actual timing of extensional outer rise events is controlled by the rheology of the shallow aseismic portion of the thrust interface. The second part of the analysis shows the effects of mantle relaxation on the rate of ground surface deformation during the earthquake cycle. Models without relaxation predict a strong overall compressional strain rate in the continental plate above the main thrust zone, with the strain rate constant between mainshocks. However with significant relaxation present, a localized region of unusually low compressional, or even slightly extensional, strain rate develops along the surface of the continental plate above and somewhat inland from the downdip edge of the locked main thrust zone. The low strain rate starts in the middle or late part of the cycle, depending on position. This result suggests that the negligible or small contraction measured on the Shumagin Islands, Alaska, during 1980 to 1991, may not invalidate an interpretation of that region as being a moderately coupled subduction zone. In contrast, mantle relaxation causes only modest temporal nonuniformity of uplift rates in the overriding plate and of extensional stress rates in the subducting plate, even when the Maxwell time is an order of magnitude less than the recurrence interval.

Journal of Geophysical Research B: Solid Earth↗
USGS2016

Automatic delineation of seacliff limits using lidar-derived high-resolution DEMs in southern California

Seacliff erosion is a serious hazard with implications for coastal management and is often estimated using successive hand-digitized cliff tops or bases (toe) to assess cliff retreat. Even if efforts are made to standardize manual digitizing and eliminate subjectivity, the delineation of cliffs is time-consuming and depends on the analyst's interpretation. An automatic procedure is proposed to extract cliff edges from high-resolution lidar-derived bare-earth digital elevation models, generalized coastal shoreline vectors, and approximate measurements of distance between the shoreline and the cliff top. The method generates orthogonal transects and profiles with a minimum spacing equal to the digital elevation model resolution. The method also extracts the xyz coordinates for each profile for the cliff top and toe, as well as second major inflections along the profile. Over 75% of the automated cliff top points and 78% of the toe automated points are within 95% confidence interval of the hand-digitized top and toe lines, and over 79% of the digitized top points and 84% of the digitized toe points are within the 95% confidence interval of the automated top and toe lines along a stretch of coast in Del Mar, California. Outlier errors were caused by either the failure to remove all vegetation from the bare-earth digital elevation model or errors of interpretation. The automatic method was further applied between Point Conception and Los Angeles Harbor, California. This automatic method is repeatable, takes advantage of detailed topographic information within high-resolution digital elevation models, and is more efficient than hand-digitizing.

California↗
USGS1977

Platinum, palladium, and rhodium in volcanic and plutonic rocks from the Gravina-Nutzotin belt, Alaska

The Gravina-Nutzotin belt of Middle (?) Jurassic to middle Cretaceous sedimentary and volcanic rocks in south and southeastern Alaska includes concentrically zoned ultramafic complexes known to contain platinum-group metals. Previous isotopic, petrologic, and geologic studies suggested a close relation in time and space between the volcanic rocks and the ultramafic complexes. Interpretation of 40 analyses for platinum, palladium, and rhodium in volcanic and plutonic rocks of the belt indicates a strong geochemical correlation between the two groups of rocks and is in support of their being cogenetic either from directly connected magma chambers and flows or indirectly by selective concentration processes from similar mantle material.

Alaska↗
USGS1978

Giant glacial grooves at the north end of the Mission Range, Northwest Montana

Giant glacial grooves both cut across and wrap around the north end of the Mission Range. Some of these grooves are straight, others crescentic, but all appear to be independent of stratigraphic units and of the gross structure of the range. They were seemingly localized by preexisting stream valleys whose original trends were determined by joints. The grooves are cut in bedrock, U-shaped in cross section, thickly veneered with till, and roughly parallel. Most range in length from 0.5 km to 3.5 km. Each groove maintains a uniform width, but widths range from about 50 in to 275 in. Depths of individual grooves vary widely, ranging from about 10 m to about 60 in. The grooves are probably contemporaneous in age, but their time of formation is uncertain; it seems to have been prior to late Pinedale time but after the pre-Bull Lake glaciations. Of the various interpretations offered to explain their origin, the one that appears to fit most of the facts suggests that those grooves at the northern tip of the mountains were carved by a lobe of the south-flowing Cordilleran ice sheet, whereas those farther south were likely formed by the westward deflection of a north-flowing Swan valley glacier.

Montana↗
USGS2012

Structure of the lower crust beneath the Carolina Trough, U.S. Atlantic continental margin

Data from three large-offset seismic profiles provide information on the crustal structure beneath the Carolina trough. The profiles, obtained by the U.S. Geological Survey, the Naval Oceanographic Research Development Agency, and the Scripps Institution of Oceanography in 1985, were oriented parallel to the trough and were located (1) seaward of the East Coast Magnetic Anomaly (ECMA), which is generally thought to represent the boundary between oceanic and continental crust; (2) along the axis of the trough between the ECMA and the hinge zone, which is thought to reflect the landward limit of highly stretched and altered transitional crust; and (3) along the Carolina platform landward of the basement hinge zone on crust thought to have been thinned only slightly during rifting. These data constrain the velocity structure of the lower crust and provide evidence for a thick lens of high-velocity (>7.1 km/s) lower crustal material that extends beneath the Carolina trough and the adjacent ocean basin. This lens reaches a maximum thickness of about 13 km beneath the deepest part of the trough, thins to about 5 km seaward of the ECMA, and is either very thin or absent landward of the hinge zone. It is interpreted to represent material that was underplated beneath and/or intruded into the crust during the late stage of continental rifting and that led to an anomalously thick plutonic layer during the early seafloor spreading phase. These data thus support the recent conclusions of White et al. (1987b) and Mutter et al. (1988) that the initiation of seafloor spreading is attended in many, if not most, cases by the generation of an anomalously large volume of melt.

Carolina Trough↗
USGS2003

Source mechanism of long-period events at Kusatsu-Shirane Volcano, Japan, inferred from waveform inversion of the effective excitation functions

We investigate the source mechanism of long-period (LP) events observed at Kusatsu-Shirane Volcano, Japan, based on waveform inversions of their effective excitation functions. The effective excitation function, which represents the apparent excitation observed at individual receivers, is estimated by applying an autoregressive filter to the LP waveform. Assuming a point source, we apply this method to seven LP events the waveforms of which are characterized by simple decaying and nearly monochromatic oscillations with frequency in the range 1-3 Hz. The results of the waveform inversions show dominant volumetric change components accompanied by single force components, common to all the events analyzed, and suggesting a repeated activation of a sub-horizontal crack located 300 m beneath the summit crater lakes. Based on these results, we propose a model of the source process of LP seismicity, in which a gradual buildup of steam pressure in a hydrothermal crack in response to magmatic heat causes repeated discharges of steam from the crack. The rapid discharge of fluid causes the collapse of the fluid-filled crack and excites acoustic oscillations of the crack, which produce the characteristic waveforms observed in the LP events. The presence of a single force synchronous with the collapse of the crack is interpreted as the release of gravitational energy that occurs as the slug of steam ejected from the crack ascends toward the surface and is replaced by cooler water flowing downward in a fluid-filled conduit linking the crack and the base of the crater lake. ?? 2003 Elsevier Science B.V. All rights reserved.

Journal of Volcanology and Geothermal Research↗
USGS2026

An integrated mudstone facies classification scheme and revised interpretation of the sedimentologic processes driving carbon burial in the Cenomanian–Turonian Greenhorn Formation, Colorado, U.S.A.

Standardizing facies descriptions has proven key to integrating interpretations of depositional processes and environments from sedimentologic observations with geochemistry data for mudstone lithologies. Because of their fine-grained nature, high degree of compaction, and heterogeneous composition, standardizing methods for mudstone descriptions has proven difficult, but it is critical to formulating meaningful interpretations of the processes that govern the accumulation of organic-rich lithologies and their role in both petroleum systems and the global carbon cycle. In this study, we have developed a modified facies classification scheme for mudstone lithologies that incorporates sedimentologic and compositional observation at the hand-sample and thin-section scales with geochemical measurements, including bulk organic and inorganic geochemistry, to characterize these rocks and their variability more completely for improved interpretations of depositional environments during a low-order sea-level transgression. The facies described in this study are of the Cenomanian–Turonian Greenhorn Formation in the USGS #1 Portland Core drilled in Fremont County, Colorado. Strata of the Greenhorn Formation span Oceanic Anoxic Event 2 (OAE-2) and the preceding interval. Lithologies range from organic-rich argillaceous mudstones with varied sedimentary structures to organic-lean, highly bioturbated limestones. Six facies were identified, each differentiated by varied sedimentary structures and geochemical composition. These facies occur in a predictable stratigraphic stacking pattern that represents a low-order sea-level transgression with interpreted depositional environments ranging from terrigenous-dominated pro-delta and muddy continental shelf at the base of the interval to pelagic offshore marine at the top of the Greenhorn Formation. Though the facies are consistent with previous interpretations of depositional environments at this locale in the Cretaceous Western Interior Seaway during the Greenhorn cyclothem, the sedimentary processes governing the accumulation of organic-rich strata that have defined this interval are significantly revised. Variability in the proximity and intensity of bottom currents driven by storms and geostrophic flows were key to the accumulation of each facies, with significant sediment transport occurring even through deposition in the most oxygen-depleted bottom waters. The methodology and interpretations provided here are now being employed to basin-scale predictions of organic enrichment utilizing calibrated petrophysical methods. The approach and results from this study improve understanding of how organic and inorganic carbon was sequestered during perturbations to the global carbon cycle associated with events such as OAE-2.

Colorado↗
USGS2012

Using borehole flow logging to optimize hydraulic-test procedures in heterogeneous fractured aquifers

Hydraulic properties of heterogeneous fractured aquifers are difficult to characterize, and such characterization usually requires equipment-intensive and time-consuming applications of hydraulic testing in situ. Conventional coring and geophysical logging techniques provide useful and reliable information on the distribution of bedding planes, fractures and solution openings along boreholes, but it is often unclear how these locally permeable features are organized into larger-scale zones of hydraulic conductivity. New boreholes flow-logging equipment provides techniques designed to identify hydraulically active fractures intersecting boreholes, and to indicate how these fractures might be connected to larger-scale flow paths in the surrounding aquifer. Potential complications in interpreting flowmeter logs include: 1) Ambient hydraulic conditions that mask the detection of hydraulically active fractures; 2) Inability to maintain quasi-steady drawdowns during aquifer tests, which causes temporal variations in flow intensity to be confused with inflows during pumping; and 3) Effects of uncontrolled background variations in hydraulic head, which also complicate the interpretation of inflows during aquifer tests. Application of these techniques is illustrated by the analysis of cross-borehole flowmeter data from an array of four bedrock boreholes in granitic schist at the Mirror Lake, New Hampshire, research site. Only two days of field operations were required to unambiguously identify the few fractures or fracture zones that contribute most inflow to boreholes in the CO borehole array during pumping. Such information was critical in the interpretation of water-quality data. This information also permitted the setting of the available string of two packers in each borehole so as to return the aquifer as close to pre-drilling conditions as possible with the available equipment.

Hydrogeology Journal↗
USGS2021

Comparative rhyolite systems: Inferences from vent patterns and eruptive episodicities: Eastern California and Laguna del Maule

Distilling my experience in having field mapped in detail the volcanic fields at Laguna del Maule and Long Valley and having worked out their time-volume-composition magmatic histories, I compare and contrast the postglacial rhyolites of the former with six multi-vent eruptive sequences of rhyolite in California. Compilations and discussions are made of volcanic-field areas and longevities, their compositions, vent distributions, individual batch and total volumes, eruptive episodicities, and tectonic influences. Growth of long-lived pluton-scale reservoirs of granitic crystal mush, from which the rhyolite melts separated, are interpreted in terms of conceptual models I published previously—(1) fundamentally basaltic transcrustal magmatism, 1981; (2) the deep-crustal MASH zone model, 1988; and (3) the rhyolite-melt crystal-mush model, 2001. Inferences and speculations are advanced concerning processes and timescales of rhyolite-melt separation from granitic mush and of prompt or long-delayed subsequent eruption.

California↗
USGS2016

Research needs to better understand Lake Ontario ecosystem function: A workshop summary

Lake Ontario investigators discussed and interpreted published and unpublished information during two workshops to assess our current understanding of Lake Ontario ecosystem function and to identify research needs to guide future research and monitoring activities. The purpose of this commentary is to summarize key investigative themes and hypotheses that emerged from the workshops. The outcomes of the workshop discussions are organized under four themes: spatial linkages and interactions, drivers of primary production, trophic transfer, and human interactions.

Journal of Great Lakes Research↗
USGS2004

Relationships between bald eagle productivity and dynamics of fish populations and fisheries in the Wisconsin waters of Lake Superior, 1983-1999

Bald eagle ( Haliaeetus leucocephalus ) abundance declined in the 1950s and 1960s along the Wisconsin waters of Lake Superior, and were nearly absent along Wisconsin's Lake Superior shoreline. The population began to increase again between 1980 and 1983, and since then bald eagles nesting on islands along Wisconsin's Lake Superior shoreline (i.e., Apostle Islands ) reproduced at a lower rate than have those nesting along the mainland shoreline of the lake and inland. Recent research indicated that bioaccumulation of toxic chemicals in the aquatic food chain no longer limits bald eagle reproduction there, and that productivity at island nests was lower than at mainland nests and inland nests as the result of low food availability. Management agencies have sought models that accurately predict productivity and explain ecological relationships, but no satisfactory models had previously been developed. Modeling was conducted here to determine which factors best explained productivity variability. The Ricker stock-recruitment model derived from only the bivariate breeding pair and productivity data explained only 1% of the variability in productivity data. The functional relationship that explained the greatest amount of productivity variation (83%) included the number of breeding pairs, burbot ( Lota lota ) biomass, longnose sucker ( Catostomus catostomus ) biomass, and commercial harvest of nontarget fishes. Model results were interpreted to mean that productivity was positively affected by populations of burbot and longnose sucker, which are important prey items, and by commercial fishermen feeding nontarget fish to bald eagles. Harvest of nontarget fishes by tribal fishermen and burbot and longnose sucker populations have not tended to change during the entire study period, although the burbot population has declined since 1991. Therefore, bald eagle productivity is not predicted to increase unless burbot, longnose sucker, or other preferred prey of bald eagles increases in the Apostle Islands.

Wisconsin↗
USGS2003

Athena Microscopic Imager investigation

The Athena science payload on the Mars Exploration Rovers (MER) includes the Microscopic Imager (MI). The MI is a fixed‐focus camera mounted on the end of an extendable instrument arm, the Instrument Deployment Device (IDD). The MI was designed to acquire images at a spatial resolution of 30 microns/pixel over a broad spectral range (400–700 nm). The MI uses the same electronics design as the other MER cameras but has optics that yield a field of view of 31 × 31 mm across a 1024 × 1024 pixel CCD image. The MI acquires images using only solar or skylight illumination of the target surface. A contact sensor is used to place the MI slightly closer to the target surface than its best focus distance (about 66 mm), allowing concave surfaces to be imaged in good focus. Coarse focusing (∼2 mm precision) is achieved by moving the IDD away from a rock target after the contact sensor has been activated. The MI optics are protected from the Martian environment by a retractable dust cover. The dust cover includes a Kapton window that is tinted orange to restrict the spectral bandpass to 500–700 nm, allowing color information to be obtained by taking images with the dust cover open and closed. MI data will be used to place other MER instrument data in context and to aid in petrologic and geologic interpretations of rocks and soils on Mars.

Journal of Geophysical Research E: Planets↗
USGS2006

Gas slug ascent through changes in conduit diameter: Laboratory insights into a volcano-seismic source process in low-viscosity magmas

Seismic signals generated during the flow and degassing of low-viscosity magmas include long-period (LP) and very-long-period (VLP) events, whose sources are often attributed to dynamic fluid processes within the conduit. We present the results of laboratory experiments designed to investigate whether the passage of a gas slug through regions of changing conduit diameter could act as a suitable source mechanism. A vertical, liquid-filled glass tube featuring a concentric diameter change was used to provide canonical insights into potentially deep or shallow seismic sources. As gas slugs ascend the tube, we observe systematic pressure changes varying with slug size, liquid depth, tube diameter, and liquid viscosity. Gas slugs undergoing an abrupt flow pattern change upon entering a section of significantly increased tube diameter induce a transient pressure decrease in and above the flare and an associated pressure increase below it, which stimulates acoustic and inertial resonant oscillations. When the liquid flow is not dominantly controlled by viscosity, net vertical forces on the apparatus are also detected. The net force is a function of the magnitude of the pressure transients generated and the tube geometry, which dictates where, and hence when, the traveling pressure pulses can couple into the tube. In contrast to interpretations of related volcano-seismic data, where a single downward force is assumed to result from an upward acceleration of the center of mass in the conduit, our experiments suggest that significant downward forces can result from the rapid deceleration of relatively small volumes of downward-moving liquid. Copyright 2006 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2006

Crater gradation in Gusev crater and Meridiani Planum, Mars

The Mars Exploration Rovers investigated numerous craters in Gusev crater and Meridiani Planum during the first ???400 sols of their missions. Craters vary in size and preservation state but are mostly due to secondary impacts at Gusev and primary impacts at Meridiani. Craters at both locations are modified primarily by eolian erosion and infilling and lack evidence for modification by aqueous processes. Effects of gradation on crater form are dependent on size, local lithology, slopes, and availability of mobile sediments. At Gusev, impacts into basaltic rubble create shallow craters and ejecta composed of resistant rocks. Ejecta initially experience eolian stripping, which becomes weathering-limited as lags develop on ejecta surfaces and sediments are trapped within craters. Subsequent eolian gradation depends on the slow production of fines by weathering and impacts and is accompanied by minor mass wasting. At Meridiani the sulfate-rich bedrock is more susceptible to eolian erosion, and exposed crater rims, walls, and ejecta are eroded, while lower interiors and low-relief surfaces are increasingly infilled and buried by mostly basaltic sediments. Eolian processes outpace early mass wasting, often produce meters of erosion, and mantle some surfaces. Some small craters were likely completely eroded/buried. Craters >100 m in diameter on the Hesperian-aged floor of Gusev are generally more pristine than on the Amazonian-aged Meridiani plains. This conclusion contradicts interpretations from orbital views, which do not readily distinguish crater gradation state at Meridiani and reveal apparently subdued crater forms at Gusev that may suggest more gradation than has occurred. Copyright 2006 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2012

Crustal structure of the Chugach Mountains, southern Alaska: A study of peg‐leg multiples from a low‐velocity zone

A seismic refraction profile recorded along the geologic strike of the Chugach Mountains in southern Alaska shows three upper crustal high‐velocity layers (6.9, 7.2, and 7.6 km/s) and a unique pattern of strongly focussed echelon arrivals to a distance of 225 km. The group velocity of the ensemble of echelon arrivals is 6.4 km/s. Modeling of this profile with the reflectivity method reveals that the echelon pattern is due to peg‐leg multiples generated from within a low‐velocity zone between the second and third upper crustal high‐velocity layers. The third high‐velocity layer (7.6 km/s) is underlain at 18 km depth by a pronounced low‐velocity zone that produces a seismic shadow zone wherein peg‐leg multiples are seen as echelon arrivals. The interpretation of these echelon arrivals as multiples supersedes an earlier interpretation which attributed them to successive primary reflections arising from alternating high‐ and low‐velocity layers. Synthetic seismogram modeling indicates that a low‐velocity zone with transitional upper and lower boundaries generates peg‐leg multiples as effectively as one with sharp boundaries. No PmP or Pn arrivals from the subducting oceanic Moho at 30 km depth beneath the western part of the line are observed on the long‐offset (90–225 km) data. This may be due to a lower crustal waveguide whose top is the high‐velocity (7.6 km/s) layer and whose base is the Moho. A deep (∼54 km) reflector is not affected by the waveguide and has been identified in the data. Although peg‐leg multiples have been interpreted on some long‐range refraction profiles that sound to upper mantle depths, the Chugach Mountains profile is one of the few crustal refraction profiles where peg‐leg multiples are clearly observed. This study indicates that multiple and converted phases may be more important in seismic refraction/wide‐angle reflection profiles than previously recognized.

Alaska↗
USGS2012

Statistical averaging of marine magnetic anomalies and the aging of oceanic crust

Visual comparison of Mesozoic and Cenozoic magnetic anomalies in the North Pacific suggests that older anomalies contain less short-wavelength information than younger anomalies in this area. To test this observation, magnetic profiles from the North Pacific are examined from crust of three ages: 0–2.1, 29.3–33.1, and 64.9–70.3 m.y, B.P. For each time period, at least nine profiles were analyzed by (1) calculating the power density spectrum of each profile, (2) averaging the spectra together, and (3) computing a ‘recording filter’ for each time period by assuming a hypothetical seafloor model. The model assumes that the top of the source is acoustic basement, the source thickness is 0.5 km, and the time scale of geomagnetic reversals is according to Ness et al. (1980). The calculated power density spectra of the three recording filters are complex in shape but show an increase of attenuation of short-wavelength information as the crust ages. These results are interpreted using a multilayer model for marine magnetic anomalies in which the upper layer, corresponding to pillow basalt of seismic layer 2A, acts as a source of noise to the magnetic anomalies. As the ocean crust ages, this noisy contribution by the pillow basalts becomes less significant to the anomalies. Consequently, magnetic sources below layer 2A must be faithful recorders of geomagnetic reversals.

Journal of Geophysical Research Solid Earth↗
USGS1973

Interpretation of depositional environment in the Plympton Formation (Permian), Southern Pequop Mountains, Nevada, from physical stratigraphy and a faunule

Field mapping in the southern part of the Pequop Mountains has shown the presence of a major structural high which has profoundly affected the stratigraphy of Pennsylvanian and Lower Permian beds; lesser effects of this high persisted into the later Permian. Within the Park City Group (Permian), the Plymton Formation, overlying the Kaibab Limestone, is divided informally into five parts. The uppermost Plympton has yielded silicified fossils. The faunule studied is characterized by the scaphopod Plagioglypta and by bellerophontacean and neritacean gastropods, suggestive of a middle Permian age. Specimens are worn, and several lines of evidence suggest that this is a high-energy beach deposit associated with a residual high. The interpretation supplements the field evidence of a hiatus between the Plympton and the overlying Gerster Formation. Other occurrences of elements of the faunule in the equivalent Phosphoria rock complex are noted, but only a few were probably deposited in a high-energy beach environment. A new species of Naticopsis that has the color pattern preserved is named and described.

Nevada↗
USGS1973

Radiometric dating of intrusive rocks in the Cottonwood area, Utah

Recently completed fission-track and K-Ar dating of zircon, sphene, apatite, muscovite, biotite, and hornblende indicate that the Clayton Peak stock was intruded 37-41 m.y. ago, the Alta stock about 32-33 m.y. ago, and the Little Cottonwood stock between 24 and 31 m.y. ago. Pb-a ages on zircon, though showing the same sequence, are about twice as great and are inferred to represent a partial mixing of inherited Precambrian zircons. Acceptance of a middle Tertiary age for the Little Cottonwood stock requires revision of earlier interpretations that it could be as old as Late Cretaceous. K-Ar dates also indicate that the Keetley Volcanics are 32 to 35 m.y. old, and a single date of 37.3 m.y. was obtained on the Traverse Volcanics, suggesting that they are more closely related to volcanic activity in the adjoining Oquirrh Mountains.

Utah↗