Search USGSSearch

SEARCH · Search USGS

Results for “Journal of Geophysical Research - Solid Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources

Martian drainage densities

Drainage densities on Mars range from zero over large areas of volcanic plains to 0.3–0.5 km −1 locally on some volcanoes. These values refer to geologic units, not to drainage basins, as is normal for terrestrial drainage densities. The highest values are close to the lowest terrestrial values derived by similar techniques. Drainage densities were determined for every geologic unit portrayed on the 1:15,000,000 geologic map of Mars. Except for volcanoes the geologic unit with the highest drainage density is the dissected Noachian plains with a drainage density of 0.0074 km −1 . The average drainage density for Noachian units is 0.0032 km −1 , for Hesperian units is 0.00047 km −1 , and for Amazonian units is 0.00007 km −1 , excluding the volcanoes. These values are 2–3 orders of magnitude lower than typical terrestrial densities as determined by similar techniques from Landsat images. The low drainage densities, despite a cumulative record that spans billions of years, indicate that compared with the Earth, the channel-forming processes have been very inefficient or have operated only rarely or that the surface is extremely permeable. The high drainage density on volcanoes is attributed to a local cause, such as hydrothermal activity, rather than to a global cause such as climate change.

Journal of Geophysical Research E: Planets

Findings and lessons learned from the assessment of the Mexico-United States transboundary San Pedro and Santa Cruz aquifers: The utility of social science in applied hydrologic research

Study Region This study region encompasses the Transboundary San Pedro and Santa Cruz aquifers which are shared between the states of Sonora (Mexico) and Arizona (US). Special regional considerations include a semi-arid climate, basin-fill aquifers with predominantly montane recharge areas, economic drivers in the mining, trade, and military sectors, groundwater-dependent cities with expanding cones of depression, interbasin groundwater transfers, ground- and surface-water contamination, and protected aquatic and riparian habitats that act as significant migration corridors for hundreds of species, including some that are threatened and endangered. Study Focus We focus on lessons learned from the hydrologic assessment of the Transboundary San Pedro and Santa Cruz aquifers. We conducted the work, in two phases: (1) laying the groundwork and (2) implementation. The “laying the groundwork” phase consisted of binational meetings with stakeholders and key actors (agencies and individuals), and the development of an understanding of the physical, institutional, historical, and socio-political context. This led to signing of the binational Transboundary Aquifer Assessment Program (TAAP) agreement in 2009 and detailed the process for cooperation and coordination in the assessment of shared aquifers. The implementation phase began with an agreement to proceed with the study of four “focus” aquifers (Santa Cruz, San Pedro, Mesilla (Conejos-Médanos in Mexico), and Hueco Bolson (Bolsón del Hueco in Mexico)) and development of associated technical teams. Though we do include a brief discussion of the lessons learned from the physical science portion of the study, the results have been described and published elsewhere. The bulk of the paper instead focuses on the findings and lessons learned from the integration of social-science perspectives into a largely physical-science based program, since there is a growing recognition of the need for this type of approach especially in the management and assessment of transboundary aquifers. New Hydrological Insights for the Region The Sonora-Arizona effort succeeded because both countries were adequately represented, and because of flexibility of skills and ability of teams comprising both university and government scientists. Teams included social and earth scientists. Including the social sciences was critical to research design and implementation, and to addressing the cultural, institutional, and socio-political contexts of transboundary aquifer assessment. Significant components of the continuing implementation phase include strategic planning, data compilation and analysis, cross-border integration of datasets, geophysical and geochemical surveys, and internal, peer, and stakeholder engagement.

Arizona, Sonora

Lunar prospector epithermal neutrons from impact craters and landing sites: Implications for surface maturity and hydrogen distribution

Initial studies of neutron spectrometer data returned by Lunar Prospector concentrated on the discovery of enhanced hydrogen abundances near both lunar poles. However, the nonpolar data exhibit intriguing patterns that appear spatially correlated with surface features such as young impact craters (e.g., Tycho). Such immature crater materials may have low hydrogen contents because of their relative lack of exposure to solar wind-implanted volatiles. We tested this hypothesis by comparing epithermal* neutron counts (i.e., epithermal −0.057 × thermal neutrons) for Copernican-age craters classified as relatively young, intermediate, and old (as determined by previous studies of Clementine optical maturity variations). The epithermal* counts of the crater and continuous ejecta regions suggest that the youngest impact materials are relatively devoid of hydrogen in the upper 1 m of regolith. We also show that the mean hydrogen contents measured in Apollo and Luna landing site samples are only moderately well correlated to the epithermal* neutron counts at the landing sites, likely owing to the effects of rare earth elements. These results suggest that further work is required to define better how hydrogen distribution can be revealed by epithermal neutrons in order to understand more fully the nature and sources (e.g., solar wind, meteorite impacts) of volatiles in the lunar regolith.

Journal of Geophysical Research E: Planets

Detection and monitoring of H2O and CO2 ice clouds on Mars

We have developed an observational scheme for the detection and discrimination of Mars atmospheric H 2 O and CO 2 clouds using ground-based instruments in the near infrared. We report the results of our cloud detection and characterization study using Mars near IR images obtained during the 1990 and 1993 oppositions. We focused on specific wavelengths that have the potential, based on previous laboratory studies of H 2 O and CO 2 ices, of yielding the greatest degree of cloud detectability and compositional discriminability. We have detected and mapped absorption features at some of these wavelengths in both the northern and southern polar regions of Mars. Compositional information on the nature of these absorption features was derived from comparisons with laboratory ice spectra and with a simplified radiative transfer model of a CO 2 ice cloud overlying a bright surface. Our results indicate that both H 2 O and CO 2 ices can be detected and distinguished in the polar hood clouds. The region near 3.00 μm is most useful for the detection of water ice clouds because there is a strong H 2 O ice absorption at this wavelength but only a weak CO 2 ice band. The region near 3.33 μm is most useful for the detection of CO 2 ice clouds because there is a strong, relatively narrow CO 2 ice band at this wavelength but only broad “continuum” H 2 O ice absorption. Weaker features near 2.30 μm could arise from CO 2 ice at coarse grain sizes, or surface/dust minerals. Narrow features near 2.00 μm, which could potentially be very diagnostic of CO 2 ice clouds, suffer from contamination by Mars atmospheric CO 2 absorptions and are difficult to interpret because of the rather poor knowledge of surface elevation at high latitudes. These results indicate that future ground-based, Earth-orbital, and spacecraft studies over a more extended span of the seasonal cycle should yield substantial information on the style and timing of volatile transport on Mars, as well as a more detailed understanding of the role of CO 2 condensation in the polar heat budget.

Journal of Geophysical Research E: Planets

Erosion rates at the Mars Exploration Rover landing sites and long-term climate change on Mars

Erosion rates derived from the Gusev cratered plains and the erosion of weak sulfates by saltating sand at Meridiani Planum are so slow that they argue that the present dry and desiccating environment has persisted since the Early Hesperian. In contrast, sedimentary rocks at Meridiani formed in the presence of groundwater and occasional surface water, and many Columbia Hills rocks at Gusev underwent aqueous alteration during the Late Noachian, approximately coeval with a wide variety of geomorphic indicators that indicate a wetter and likely warmer environment. Two-toned rocks, elevated ventifacts, and perched and undercut rocks indicate localized deflation of the Gusev plains and deposition of an equivalent amount of sediment into craters to form hollows, suggesting average erosion rates of ???0.03 nm/yr. Erosion of Hesperian craters, modification of Late Amazonian craters, and the concentration of hematite concretions in the soils of Meridiani yield slightly higher average erosion rates of 1-10 nm/yr in the Amazonian. These erosion rates are 2-5 orders of magnitude lower than the slowest continental denudation rates on Earth, indicating that liquid water was not an active erosional agent. Erosion rates for Meridiani just before deposition of the sulfate-rich sediments and other eroded Noachian areas are comparable with slow denudation rates on Earth that are dominated by liquid water. Available data suggest the climate change at the landing sites from wet and likely warm to dry and desiccating occurred sometime between the Late Noachian and the beginning of the Late Hesperian (3.7-3.5 Ga). Copyright 2006 by the American Geophysical Union.

Journal of Geophysical Research E: Planets

Wind-driven particle mobility on Mars: Insights from Mars Exploration Rover observations at "El Dorado" and surroundings at Gusev Crater

The ripple field known as 'El Dorado' was a unique stop on Spirit's traverse where dust-raising, active mafic sand ripples and larger inactive coarse-grained ripples interact, illuminating several long-standing issues of Martian dust mobility, sand mobility, and the origin of transverse aeolian ridges. Strong regional wind events endured by Spirit caused perceptible migration of ripple crests in deposits SSE of El Dorado, erasure of tracks in sandy areas, and changes to dust mantling the site. Localized thermal vortices swept across El Dorado, leaving paths of reduced dust but without perceptibly damaging nearly cohesionless sandy ripple crests. From orbit, winds responsible for frequently raising clay-sized dust into the atmosphere do not seem to significantly affect dunes composed of (more easily entrained) sand-sized particles, a long-standing paradox. This disparity between dust mobilization and sand mobilization on Mars is due largely to two factors: (1) dust occurs on the surface as fragile, low-density, sand-sized aggregates that are easily entrained and disrupted, compared with clay-sized air fall particles; and (2) induration of regolith is pervasive. Light-toned bed forms investigated at Gusev are coarse-grained ripples, an interpretation we propose for many of the smallest linear, light-toned bed forms of uncertain origin seen in high-resolution orbital images across Mars. On Earth, wind can organize bimodal or poorly sorted loose sediment into coarse-grained ripples. Coarse-grained ripples could be relatively common on Mars because development of durable, well-sorted sediments analogous to terrestrial aeolian quartz sand deposits is restricted by the lack of free quartz and limited hydraulic sediment processing. Copyright 2008 by the American Geophysical Union.

Journal of Geophysical Research E: Planets

Ventifacts at the Pathfinder landing site

About half of the rocks at the Mars Pathfinder Ares Vallis landing site appear to be ventifacts, rocks abraded by windborne particles. Comparable resolution images taken by the Imager for Mars Pathfinder (IMP) camera and the Viking landers show that ventifacts are more abundant at the Pathfinder site. The ventifacts occur in several forms, including rocks with faceted edges, finger‐like projections, elongated pits, flutes, grooves, and possible rills. The trends of elongated pits, flutes, grooves, and rills cluster at ∼280–330° clockwise from north and generally dip 10–30° away from their trend direction. These orientations are indicative of southeast to northwest winds and differ from the trend of wind tails at the landing site, the direction of local wind streaks, and predictions of the Global Circulation Model, all of which indicate northeast to southwest winds. The disparity between these data sets strongly suggests that local circulation patterns have changed since the abrasion of the ventifacted rocks. The greater number of ventifacts at the Pathfinder site compared to either of the Viking sites is most easily explained as being due to a larger supply of abrading particles, composed of either sand‐sized grains or indurated dust aggregates, and higher surface roughness, which should increase the momentum of saltating grains. The Pathfinder ventifacts may have formed shortly after the deposition of outflow channel sediments nearly 2 Gry ago, when a large local supply of abrading particles should have been abundant and atmospheric conditions may have been more conducive to rock abrasion from saltating grains. Based on how ventifacts form on Earth, the several ventifact forms seen at the Pathfinder site and their presence on some rocks but not on others are probably due to local airflow conditions, original rock shape, exposure duration, rock movement, and to a lesser extent, rock lithology. The abundance of ventifacts at the Pathfinder site, together with other evidence of weathering, indicates that unaltered rock surfaces are rare on Mars.

Journal of Geophysical Research E: Planets

The birth and death of transverse aeolian ridges on Mars

Transverse aeolian ridges (TARs) are small bright windblown deposits found throughout the Martian tropics that stand a few meters tall and are spaced a few tens of meters apart. The origin of these features remains mysterious more than 20 years after their discovery on Mars. This paper presents a new hypothesis, that some of the TARs could be indurated dust deposits emplaced millions of years ago during periods of higher axial obliquity. It suggests that these TARs are primary depositional bed forms that accumulated in place from dust carried by the winds in suspension, perhaps in a manner comparable to antidunes on Earth, and were subsequently indurated and eroded to their current states by eons of sandblasting. It points out examples of modern dust drifts and dune‐like features that appear to have been recently formed by dust accumulating directly onto the surface from atmospheric suspension. It shows how these pristine dust deposits could evolve to explain the range of morphologies of the TARs. Finally, it explains how the known properties of many TARs are consistent with this hypothesis, including their composition, thermal behavior, and distribution.

Journal of Geophysical Research E: Planets

Nonlinear inversion of borehole-radar tomography data to reconstruct velocity and attenuation distribution in earth materials

A nonlinear tomographic inversion method that uses first-arrival travel-time and amplitude-spectra information from cross-hole radar measurements was developed to simultaneously reconstruct electromagnetic velocity and attenuation distribution in earth materials. Inversion methods were developed to analyze single cross-hole tomography surveys and differential tomography surveys. Assuming the earth behaves as a linear system, the inversion methods do not require estimation of source radiation pattern, receiver coupling, or geometrical spreading. The data analysis and tomographic inversion algorithm were applied to synthetic test data and to cross-hole radar field data provided by the US Geological Survey (USGS). The cross-hole radar field data were acquired at the USGS fractured-rock field research site at Mirror Lake near Thornton, New Hampshire, before and after injection of a saline tracer, to monitor the transport of electrically conductive fluids in the image plane. Results from the synthetic data test demonstrate the algorithm computational efficiency and indicate that the method robustly can reconstruct electromagnetic (EM) wave velocity and attenuation distribution in earth materials. The field test results outline zones of velocity and attenuation anomalies consistent with the finding of previous investigators; however, the tomograms appear to be quite smooth. Further work is needed to effectively find the optimal smoothness criterion in applying the Tikhonov regularization in the nonlinear inversion algorithms for cross-hole radar tomography.

New Hampshire

Assessment of Mars Pathfinder landing site predictions

Remote sensing data at scales of kilometers and an Earth analog were used to accurately predict the characteristics of the Mars Pathfinder landing site at a scale of meters. The surface surrounding the Mars Pathfinder lander in Ares Vallis appears consistent with orbital interpretations, namely, that it would be a rocky plain composed of materials deposited by catastrophic floods. The surface and observed maximum clast size appears similar to predictions based on an analogous surface of the Ephrata Fan in the Channeled Scabland of Washington state. The elevation of the site measured by relatively small footprint delay-Doppler radar is within 100 m of that determined by two-way ranging and Doppler tracking of the spacecraft. The nearly equal elevations of the Mars Pathfinder and Viking Lander 1 sites allowed a prediction of the atmospheric conditions with altitude (pressure, temperature, and winds) that were well within the entry, descent, and landing design margins. High-resolution (~38 m/pixel) Viking Orbiter 1 images showed a sparsely cratered surface with small knobs with relatively low slopes, consistent with observations of these features from the lander. Measured rock abundance is within 10% of that expected from Viking orbiter thermal observations and models. The fractional area covered by large, potentially hazardous rocks observed is similar to that estimated from model rock distributions based on data from the Viking landing sites, Earth analog sites, and total rock abundance. The bulk and fine-component thermal inertias measured from orbit are similar to those calculated from the observed rock size-frequency distribution. A simple radar echo model based on the reflectivity of the soil (estimated from its bulk density), and the measured fraction of area covered by rocks was used to approximate the quasi-specular and diffuse components of the Earth-based radar echos. Color and albedo orbiter data were used to predict the relatively dust free or unweathered surface around the Pathfinder lander compared to the Viking landing sites. Comparisons with the experiences of selecting the Viking landing sites demonstrate the enormous benefit the Viking data and its analyses and models had on the successful predictions of the Pathfinder site. The Pathfinder experience demonstrates that, in certain locations, geologic processes observed in orbiter data can be used to infer surface characteristics where those processes dominate over other processes affecting the Martian surface layer. Copyright 1999 by the American Geophysical Union.

Journal of Geophysical Research E: Planets

Ash3d: A finite-volume, conservative numerical model for ash transport and tephra deposition

We develop a transient, 3-D Eulerian model (Ash3d) to predict airborne volcanic ash concentration and tephra deposition during volcanic eruptions. This model simulates downwind advection, turbulent diffusion, and settling of ash injected into the atmosphere by a volcanic eruption column. Ash advection is calculated using time-varying pre-existing wind data and a robust, high-order, finite-volume method. Our routine is mass-conservative and uses the coordinate system of the wind data, either a Cartesian system local to the volcano or a global spherical system for the Earth. Volcanic ash is specified with an arbitrary number of grain sizes, which affects the fall velocity, distribution and duration of transport. Above the source volcano, the vertical mass distribution with elevation is calculated using a Suzuki distribution for a given plume height, eruptive volume, and eruption duration. Multiple eruptions separated in time may be included in a single simulation. We test the model using analytical solutions for transport. Comparisons of the predicted and observed ash distributions for the 18 August 1992 eruption of Mt. Spurr in Alaska demonstrate to the efficacy and efficiency of the routine.

Journal of Geophysical Research

Observations of periglacial landforms in Utopia Planitia with the High Resolution Imaging Science Experiment (HiRISE)

The region of western Utopia Planitia (80-105 degreesE, 40-55 degrees N) displays several types of landforms similar to Earth periglacial features, including scallop-shaped depressions and networks of polygonal terrains. The scalloped depressions have been proposed to originate from thermokarstic processes such as sublimation and/or melting of near-surface ground ice. Using HiRISE imagery, we characterize these depressions and several associated, distinct polygon networks in unprecedented morphologic and topographic detail and investigate support for an ice-based degradation process. The scalloped depressions and interior polygons and ridges are found to evolve together, mainly influenced by sublimation, local proximity of ground ice to the surface, and obliquity variations.

Journal of Geophysical Research

Observations of the lunar regolith and the Earth from the television camera on Surveyor 7

Surveyor 7, the last spacecraft of the Surveyor series, landed about 30 km north of the rim crest of Tycho, one of the most prominent and well-known features in the southern part of the moon. About 21,000 pictures were transmitted during two lunar days of operation. At the Surveyor 7 site, the cumulative size-frequency distribution of craters 13 cm to 3 meters in diameter follows closely the distribution of craters observed at the other Surveyor sites in the lunar maria. This distribution of small craters is believed to be a steady-state distribution.

Journal of Geophysical Research

Radar and photoclinometric studies of wrinkle ridges on Mars

Earth-based radar altimetry and image derived photoclinometric profiles were analyzed to examine both the long- and short-wavelength topography associated with wrinkle ridges on Mars. Photoclinometrically derived elevation data across wrinkle ridges were evaluated to determine the sensitivity of profiles to two empirical photoclinometric parameters, the horizontal digital number (HDN) and the scattered light value (SLV). The photoclinometric profiles are extremely sensitive to small variations in HDN. The sense of slope of a profile can be completely reversed over a range in HDN of as little as ±1. Comparably small variations in the SLV have relatively minor effects on the photoclinometrically derived elevations. The existence of elevation offsets from one side of the ridge to the other, reported in previous photoclinometric studies of martian wrinkles, were not confirmed through photoclinometry. In addition, no evidence of elevation offsets were found in Earth-based radar altimetry profiles across wrinkle ridges. In order to more accurately model wrinkle ridge topography, we controlled photoclinometrically derived elevations with long-wavelength topography obtained from the radar altimetry. The results of this study do not support kinematic models for the origin of planetary wrinkle ridges that involve deeply rooted thrust faults which separate crustal blocks at different elevations. A kinematic model involving buckling of shallow crustal layers into concentric folds that close, leading to the development of thrust faults, is consistent with wrinkle ridge morphology and terrestrial analogs. Recent geophysical studies of terrestrial analogs and the influence of shallow subsurface structures, particularly buried craters, on the localization of many wrinkle ridges on Mars suggest that thrust faults associated with the ridges are confined to the ridged plains material and do not extend into the lithosphere.

Journal of Geophysical Research E: Planets

Geochemical evidence for water‐rock interaction along the San Andreas and Garlock Faults of California

Mesozoic granitoid rocks adjacent to the San Andreas fault in central California have retained their radiogenic Ar for the last 70 m.y. but have, generally, the highest 18 O and H 2 O + contents and the lowest D contents of all the granitoid rocks in California. The geographical coincidence of the D, 18 O, and H 2 O + patterns with the present trace of the San Andreas fault leave little doubt that some kind of groundwater circulation system has operated in the vicinity of the fault in central California. Similar isotopic patterns exist in rocks along the Garlock fault. These water‐rock interactions probably took place at temperatures <200°C, although depth, extent, and timing are not resolved. Stable isotope compositions of rocks from many localities of the earth have provided unambiguous proof that meteoric waters have descended to depths at least as great as 8 to 10 km when a heat source such as a cooling pluton was present. Massive circulation of groundwater is common in the upper crust of tectonically active areas and may affect the frictional stress state along major faults. The geochemical evidence for extensive deep circulation of groundwater and the relatively high permeabilities for most rocks of the upper crust recently compiled by Brace (1980) argues against nearly lithostatic fluid pressures as an ambient condition of the upper crust. Groundwater circulation along the San Andreas provides an efficient mechanism for diffusing the heat flow anomaly that arises in heat transport calculations that are based on thermal conduction alone.

California

Hydrous carbonates on Mars?: Evidence from Mariner 6/7 infrared spectrometer and ground‐based telescopic spectra

Absorption features at 2.28 and 5.4 μm identified in Mariner 6/7 infrared spectrometer and terrestrial telescopic spectra are consistent with the spectra of hydrous magnesium carbonates such as hydromagnesite and artinite. Spectral characteristics of these hydrous carbonates are different from those of the anhydrous carbonates, as the former do not have the strong spectral features typically associated with anhydrous carbonates such as calcite and siderite. Theoretical mixing indicates that, depending on the type of hydrous carbonate, 10–20 wt % can be incorporated into the regolith without contradicting the spectral observations or the Viking x ray fluorescence chemical analysis. Hydrous carbonates form as weathering products of mafic minerals in the presence of H 2 O and CO 2 , even in the Antarctic. Their formation as evaporite minerals from either original magmas or hydrothermally altered rocks is consistent with the Martian environment, provided liquid water is or has been at least transiently present. On Earth, formation of hydrous Mg carbonates is associated with the production of amorphous iron oxides, which is consistent with both the environment and the inferred surface mineralogy of Mars. These minerals are about 60 wt % H 2 O, CO 3 , and OH; if they are abundant everywhere at the 10% level, then about 6% of the surface weight could be volatiles bound in this type of mineral. Although the stability of hydrous carbonates in a Martian environment is uncertain, there may be kinetic factors inhibiting the dehydration of these minerals, which may persist metastably in the current environment. Although the spectroscopic evidence for anhydrous carbonates is scant, the possible presence of hydrous carbonates provides an appealing mechanism for the existence of carbonates on Mars.

Journal of Geophysical Research

Coseismic slip and early afterslip of the M6.0 August 24, 2014 South Napa, California, earthquake

We employ strong motion seismograms and static offsets from the Global Positioning System, Interferometric Synthetic Aperture Radar, and other measurements in order to derive a coseismic slip and afterslip model of the M6.0 24 August 2014 South Napa earthquake. This earthquake ruptured an ∼13‐km‐long portion of the West Napa fault with predominantly right‐lateral strike slip. In the kinematic seismic slip inversions, we couple the coseismic slip and afterslip distributions by requiring both distributions to involve right‐lateral strike slip with positive amplitude, with the net static slip being the sum of the two. We consider several candidate fault geometries: a first involving two steeply east dipping fault planes that reach Earth's surface at the western surface trace (STW), where most surface rupture was observed, a second involving a steeply west dipping plane that also reaches Earth's surface at the STW, and a third involving a combination of two variably west dipping planes constrained to pass through the locus of postseismic seismicity located ∼1 km west of the STW. The data are best fit using the model of two east dipping fault planes, with coseismic slip up to ∼1.2 m on a dominant shallow asperity about 10 km north of the hypocenter and on deeper asperities on the southern part of the rupture. Afterslip up to 1 m is concentrated along the southern part of the rupture at depths 5 km, consistent with surface observations of afterslip. Seismic moments associated with coseismic slip and afterslip are 1.13×10 18 N m (Mw 6.00) and 3.64×10 17 N m, respectively.

California

Borehole strainmeter measurements spanning the 2014, M w 6.0 South Napa Earthquake, California: The effect from instrument calibration

The 24 August 2014 M w 6.0 South Napa, California earthquake produced significant offsets on 12 borehole strainmeters in the San Francisco Bay area. These strainmeters are located between 24 and 80 km from the source and the observed offsets ranged up to 400 parts-per-billion (ppb), which exceeds their nominal precision by a factor of 100. However, the observed offsets of tidally calibrated strains differ by up to 130 ppb from predictions based on a moment tensor derived from seismic data. The large misfit can be attributed to a combination of poor instrument calibration and better modeling of the strain fit from the earthquake. Borehole strainmeters require in-situ calibration, which historically has been accomplished by comparing their measurements of Earth tides with the strain-tides predicted by a model. Although the borehole strainmeter accurately measure the deformation within the borehole, the long-wavelength strain signals from tides or other tectonic processes recorded in the borehole are modified by the presence of the borehole and the elastic properties of the grout and the instrument. Previous analyses of surface-mounted, strainmeter data and their relationship with the predicted tides suggest that tidal models could be in error by 30%. The poor fit of the borehole strainmeter data from this earthquake can be improved by simultaneously varying the components of the model tides up to 30% and making small adjustments to the point-source model of the earthquake, which reduces the RMS misfit from 130 ppb to 18 ppb. This suggests that relying on tidal models to calibrate borehole strainmeters significantly reduces their accuracy.

California