Commercial deductions from comparisons of gasoline and alcohol tests on internal-combustion engines
Explore the source record for details and available documents.
Bulletin↗
SEARCH · Search USGS
Results for “Internal Report”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Water resources data for Montana, water year 1976
Water resources data for the 1976 water year for Montana consist of records of stage, discharge, and water quality of streams; stage, contents, and water quality of lakes and reservoirs; and water-levels of wells. This report contains discharge records for 217 gaging stations; stage only records for 1 lake station; stage and contents for 9 lakes and reservoirs; water quality for 61 gaging stations, 43 water-quality stations, and 4 lake stations; and water levels for 25 observation wells. Also included are data for 205 crest-stage partial-record stations and 53 smaller reservoirs. Additional water data were collected at various sites, not involved in the systematic data collection program, and are published as miscellaneous measurements. A few pertinent stations (not included above) in bordering States are also included in this report; however, numerous stations in Canada operated for the International Joint Commission under cooperative agreement with the U.S. Department of State are included in the above. Locations of gaging stations are shown on figure 3, ground-water observation wells are shown on figure 4, and water-quality stations are shown on figure 4. These data represent that part of the National Water Data System collected by the U.S. Geological Survey and cooperating State and Federal agencies in Montana.
Montana↗
Geologic investigations of radioactive deposits, semiannual progress report for June 1 to November 30, 1955
This report is a statement of progress during the six-months period from June 1 to November 30, 1955 on investigations of radioactive materials in the United States and Alaska, undertaken by the U.S. Geological Survey under the sponsorship of the U.S. Atomic Energy Commission. During the period the Geological Survey's program has been directed to an increasing extent toward the understanding of geologic conditions favorable for the concentration of uranium, rather than the search for minable deposits as such. This shift in emphasis is reflected in the decreased amount of exploration drilling during the period, and the accompanying increase in geologic programs of a long-range nature. The program is now directed toward a comprehensive understanding of the many factors involved in uranium geology, and the publication of reports that will make available information on all phases of the uranium program. Many investigations have progressed to the point where final reports are in preparation for future publication with the permission of the Atomic Energy Commission; for other investigations of a continuing nature it will be several years before final reports can be prepared. Formal publications (as distinguished from administrative Trace Elements Reports) published during the period include 10 Geological Survey Bulletins or Bulletin Chapters; 116 Geological Survey maps; 15 reports published in scientific journals; seven Trace Elements Reports sent to the Technical Information Service of the Atomic Energy Commission for distribution and sale to the public; and four Trace Elements reports placed on open file. In addition, a large number •of papers by geologists in the program were presented before scientific societies, and the 61 papers prepared for the United Nations International Conference .on the Peaceful Uses of Atomic Energy during the preceding report period were published by the United Nations.
Trace Elements Investigations↗
Depleted uranium analysis in blood by inductively coupled plasma mass spectrometry
In this study we report depleted uranium (DU) analysis in whole blood samples. Internal exposure to DU causes increased uranium levels as well as change in the uranium isotopic composition in blood specimen. For identification of DU exposure we used the 235U/238U ratio in blood samples, which ranges from 0.00725 for natural uranium to 0.002 for depleted uranium. Uranium quantification and isotopic composition analysis were performed by inductively coupled plasma mass spectrometry. For method validation we used eight spiked blood samples with known uranium concentrations and isotopic composition. The detection limit for quantification was determined to be 4 ng L-1 uranium in whole blood. The data reproduced within 1-5% RSD and an accuracy of 1-4%. In order to achieve a 235U/238U ratio range of 0.00698-0.00752% with 99.7% confidence limit a minimum whole blood uranium concentration of 60 ng L??1 was required. An additional 10 samples from a cohort of veterans exposed to DU in Gulf War I were analyzed with no knowledge of their medical history. The measured 235U/ 238U ratios in the blood samples were used to identify the presence or absence of DU exposure within this patient group. ?? 2009 The Royal Society of Chemistry.
Journal of Analytical Atomic Spectrometry↗
Geochemical characterization and dating of R tephra, a post-glacial marker bed in Mount Rainier National Park, Washington, U.S.A.
The oldest postglacial lapilli–ash tephra recognized in sedimentary records surrounding Mount Rainier (Washington State, USA) is R tephra, a very early Holocene deposit that acts as an important stratigraphic and geochronologic marker bed. This multidisciplinary study incorporates tephrostratigraphy, radiocarbon dating, petrography, and electron microprobe analysis to characterize R tephra. Tephra samples were collected from Tipsoo Lake and a stream-cut exposure in the Cowlitz Divide area of Mount Rainier National Park. Field evidence from 25 new sites suggests that R tephra locally contains internal bedding and has a wider distribution than previously reported. Herein, we provide the first robust suite of geochemical data that characterize the tephra. Glass compositions are heterogeneous, predominantly ranging from andesite to rhyolite in ash- to lapilli-sized clasts. The mineral assemblage consists of plagioclase, orthopyroxene, clinopyroxene, and magnetite with trace apatite and ilmenite. Subaerial R tephra deposits appear more weathered in hand sample than subaqueous deposits, but weathering indices suggest negligible chemical weathering in both deposits. Statistical analysis of radiocarbon ages provides a median age for R tephra of ∼10 050 cal years BP, and a 2σ error range between 9960 and 10 130 cal years BP.
Washington↗
Famine Early Warning System Network (FEWS NET)
The FEWS NET mission is to identify potentially food-insecure conditions early through the provision of timely and analytical hazard and vulnerability information. U.S. Government decision-makers act on this information to authorize mitigation and response activities. The U.S. Geological Survey (USGS) FEWS NET provides tools and data for monitoring and forecasting the incidence of drought and flooding to identify shocks to the food supply system that could lead to famine. Historically focused on Africa, the scope of the network has expanded to be global coverage. FEWS NET implementing partners include the USGS, National Aeronautics and Space Administration (NASA), National Oceanic and Atmospheric Administration (NOAA), United States Agency for International Development (USAID), United States Department of Agriculture (USDA), and Chemonics International.
Fact Sheet↗
Monitoring crustal strain, Cerro Prieto geothermal field, Baja California, Mexico
Significant ground deformation may be occurring in the Cerro Prieto geothermal area, Mexicali Valley, Mexico, as a direct result of extensive withdrawals of geothermal fluid and of continuing tectonism. In order to measure the magnitude and rate of this deformation, three networks of precise geodetic control were established in 1977-78, as part of an international agreement between Mexico and the United States. This report gives the background data for one of these survey nets--a local network of precise horizontal control designed to monitor the horizontal component of ground movement in the area of geothermal production. It represents the first year's effort of a 3-year investigation by the U.S. Geological Survey. It is anticipated that the network of horizontal control will become part of the monitoring program of the Mexican Comision Federal de Electricidad (C.F.E.) for periodic surveys. Fifty-nine lines of precise horizontal control comprising the Cerro Prieto horizontal-control net were established and measured for the first time during January-March 1978. The net encompasses the area of geothermal interest, and spans many of the active local and regional faults. By repeated measurement of the lines in the network, magnitudes and rates of relative ground movement can be calculated. Surveyed control lines of the net tie stations in the geothermal area to bedrock reference stations on Cerro Prieto volcano and four peaks of the Cucapas Mountains. Thus, measured ground movement in the geothermal area can eventually be correlated with regional changes in western Mexicali Valley. To measure accurately the deformation caused by geothermal production and to differentiate this deformation from changes due to other causes are among the challenges of this research program.
Baja California↗
Probing reservoir-triggered earthquakes in Koyna, India, through scientific deep drilling
We report here the salient features of the recently concluded International Continental Scientific Drilling Program (ICDP) workshop in Koyna, India. This workshop was a sequel to the earlier held ICDP workshop in Hyderabad and Koyna in 2011. A total of 49 experts (37 from India and 12 from 8 other countries) spent 3 days reviewing the work carried out during the last 3 years based on the recommendations of the 2011 workshop and suggesting the future course of action, including detailed planning for a full deep drilling proposal in Koyna, India. It was unanimously concluded that Koyna is one of the best sites anywhere in the world to investigate genesis of triggered earthquakes from near-field observations. A broad framework of the activities for the next phase leading to deep drilling has been worked out.
Scientific Drilling↗
Internal nutrient sources and nutrient distributions in Alviso Pond A3W, California
Within the Alviso Salt Pond complex, California, currently undergoing avian-habitat restoration, pore-water profilers (U.S. Patent 8,051,727 B1) were deployed in triplicate at two contrasting sites in Pond A3W (“Inlet”, near the inflow, and “Deep”, near the middle of the pond; figs. 1 and 2; table 1, note that tables in this report are provided online only as a .xlsx workbook at http://pubs.usgs.gov/of/2013/1128/). Deployments were conducted in 2010 and 2012 during the summer algal-growth season. Specifically, three deployments, each about 7 weeks apart, were undertaken each summer. This study provides the first measurements of the diffusive flux of nutrients across the interface between the pond bed and water column (that is, benthic nutrient flux). These nutrient fluxes are crucial to pond restoration efforts because they typically represent a major (if not the greatest) source of nutrients to the water column in both ponds and other lentic systems. For soluble reactive phosphorus (SRP, the most biologically available form in solution), benthic flux was positive both years (that is, out of the sediment into the water column; table 2), with the exception of the August 2010 deployment, which exhibited nearly negligible but negative flux. Overall, the average SRP flux was significantly greater at Deep (23.9 ± 8.6 micromoles per square meter per hour (µmol-m -2 -h -1 ); all errors shown reflect the 95-percent confidence interval) than Inlet (12.6 ± 4.9 µmol-m -2 -h -1 ). There was much greater temporal variability in SRP flux in the pond than reported for the lower estuary (Topping and others, 2001). For dissolved ammonia, benthic flux was consistently positive on all six sampling trips, and similar to SRP, the fluxes at Deep (258 ± 49 µmol-m -2 -h -1 ) were consistently greater than those at Inlet (28 ± 11 µmol-m -2 -h -1 ). Dissolved ammonia fluxes reported for South San Francisco Bay by Topping and others (2001) fall in between these values. Once again, greater variability for benthic fluxes determined in the pond was observed relative to adjacent South San Francisco Bay. With the near absence of any measurable concentration gradient, dissolved-nitrate fluxes were consistently negligible in the pond. Silica fluxes are often used to represent sediment diagenetic processes that biogeochemically cycle silica (an important algal macronutrient) between biogenic and inorganic phases (Fanning and Pilson, 1974; Emerson and others, 1984). For South San Francisco Bay, those values are consistently positive from core-incubation experiments. In Pond A3W, dissolved-silica fluxes averaged 49 ± 25 µmol-m -2 -h -1 at Inlet and were much higher at Deep (482 ± 370 µmol-m -2 -h -1 ), similar to the spatially variability observed for SRP and dissolved ammonia. An elevated silica flux can stimulate diatom production and subsequent eutrophication effects. Variability in these silica fluxes is consistent with season patterns in pond primary productivity. On the basis of comparisons of dissolved-oxygen flux measurements by profilers and core incubations, it appears that diffusive flux estimates for the sediment in this pond, as one might expected in such benthically productive environments, result in a significant underestimation of true sediment oxygen demand. Therefore, a core incubation experiment was conducted to better quantify the demand. To complement these benthic-flux studies, a diurnal study of nutrient advective flux into and out of the pond was measured during neap and spring tides to provide comparative estimates for allochthonous solute transport (Garret, 2012). Using the two different tides as the probable upper and lower boundaries, we can estimate a range of probable values throughout the year. After converting this advective flux into kg/yr, we can compare it directly to benthic flux estimates for the pond extrapolated over the 2.27 square kilometer (km 2 ) pond surface. Benthic flux of nitrogen species, averaged over all sites and dates, was about 80,000 kilograms per year (kg/yr), well above the adjective flux range of -50 to 1,500 kg/yr. By contrast, the average benthic flux of orthophosphate was about 12,000 kg/yr, well below the advective flux range of 21,500 to 30,000 kg/yr. Initial benthic flux estimates were also made for trace metals, including copper, nickel, iron, and manganese. These analyses indicated that the two sites, Inlet and Deep, have different pore-water profiles, with Inlet exhibiting much higher benthic flux estimates for nickel, iron, and manganese. These initial benthic-flux values reported for macronutrients are particularly impressive in magnitude when one considers that diffusive flux of dissolved solutes based on pore-water profiles provides a conservative determination that may be enhanced by other biogeochemical processes. These enhancement processes (Boudreau and Jorgensen, 2001) include bioturbation, bioirrigation, wind resuspension, and potential groundwater inflows, some of which are captured in core-incubation experiments (Kuwabara and others, 2009). Hence, the values reported herein represent lower bounds to indicate the potential importance of such internal solute sources. The elevated diffusive fluxes for nutrients in the pond relative to the adjacent estuary indicate that vertical nutrient transport between the pond bed and water column is consistently an important (and at times the most important) source of nutrients that stimulate phytoplankton growth in the water column. One might therefore reasonably hypothesize that this benthic transport of biologically reactive solutes (both nutrients and toxicants) represents the most important step at the base of the food web for trophic transfer.
California↗
Hurricane Mitch: Peak Discharge for Selected River Reachesin Honduras
Hurricane Mitch began as a tropical depression in the Caribbean Sea on 22 October 1998. By 26 October, Mitch had strengthened to a Category 5 storm as defined by the Saffir-Simpson Hurricane Scale (National Climate Data Center, 1999a), and on 27 October was threatening the northern coast of Honduras (fig. 1). After making landfall 2 days later (29 October), the storm drifted south and west across Honduras, wreaking destruction throughout the country before reaching the Guatemalan border on 31 October. According to the National Climate Data Center of the National Oceanic and Atmospheric Administration (National Climate Data Center, 1999b), Hurricane Mitch ranks among the five strongest storms on record in the Atlantic Basin in terms of its sustained winds, barometric pressure, and duration. Hurricane Mitch also was one of the worst Atlantic storms in terms of loss of life and property. The regionwide death toll was estimated to be more than 9,000; thousands of people were reported missing. Economic losses in the region were more than $7.5 billion (U.S. Agency for International Development, 1999). Honduras suffered the most widespread devastation during the storm. More than 5,000 deaths, and economic losses of more than $4 billion, were reported by the Government of Honduras. Honduran officials estimated that Hurricane Mitch destroyed 50 years of economic development. In addition to the human and economic losses, intense flooding and landslides scarred the Honduran landscape - hydrologic and geomorphologic processes throughout the country likely will be affected for many years. As part of the U.S. Government's response to the disaster, the U.S. Geological Survey (USGS) conducted post-flood measurements of peak discharge at 16 river sites throughout Honduras (fig. 2). Such measurements, termed 'indirect' measurements, are used to determine peak flows when direct measurements (using current meters or dye studies, for example) cannot be made. Indirect measurements of peak discharge are based on post-flood surveys of the river channel (observed high-water marks, cross sections, and hydraulic properties) and model computation of peak discharge. Determination of the flood peaks associated with Hurricane Mitch will help scientists understand the magnitude of this devastating hurricane. Peak-discharge information also is critical for the proper design of hydraulic structures (such as bridges and levees), delineation of theoretical flood boundaries, and development of stage-discharge relations at streamflow-monitoring sites.
Water-Resources Investigations Report↗
Salamander chytrid fungus ( Batrachochytrium salamandrivorans ) in the United States—Developing research, monitoring, and management strategies
The recently (2013) identified pathogenic chytrid fungus, Batrachochytrium salamandrivoran s ( Bsal ), poses a severe threat to the distribution and abundance of salamanders within the United States and Europe. Development of a response strategy for the potential, and likely, invasion of Bsal into the United States is crucial to protect global salamander biodiversity. A formal working group, led by Amphibian Research and Monitoring Initiative (ARMI) scientists from the U.S. Geological Survey (USGS) Patuxent Wildlife Research Center, Fort Collins Science Center, and Forest and Rangeland Ecosystem Science Center, was held at the USGS Powell Center for Analysis and Synthesis in Fort Collins, Colorado, United States from June 23 to June 25, 2015, to identify crucial Bsal research and monitoring needs that could inform conservation and management strategies for salamanders in the United States. Key findings of the workshop included the following: (1) the introduction of Bsal into the United States is highly probable, if not inevitable, thus requiring development of immediate short-term and long-term intervention strategies to prevent Bsal establishment and biodiversity decline; (2) management actions targeted towards pathogen containment may be ineffective in reducing the long-term spread of Bsal throughout the United States; and (3) early detection of Bsal through surveillance at key amphibian import locations, among high-risk wild populations, and through analysis of archived samples is necessary for developing management responses. Top research priorities during the preinvasion stage included the following: (1) deployment of qualified diagnostic methods for Bsal and establishment of standardized laboratory practices, (2) assessment of susceptibility for amphibian hosts (including anurans), and (3) development and evaluation of short- and long-term pathogen intervention and management strategies. Several outcomes were achieved during the workshop, including development of an organizational structure with working groups for a Bsal Task Force, creation of an initial influence diagram to aid in identifying effective management actions in the face of uncertainty, and production of a list of potential management actions and key research uncertainties. Additional products under development include a Bsal Strategic Action plan, an emergency response plan, a monitoring and surveillance program, a standardized diagnostic approach, decision models for natural resource agencies, and a reporting database for salamander mortalities. This workshop was the first international meeting to address the threat of Bsal to salamander populations in the United States, with more than 30 participants from U.S. conservation and resource management agencies (U.S. Fish and Wildlife Service, U.S. Forest Service, U.S. Department of Defense, U.S. National Park Service, and Association of Fish and Wildlife Agencies) and academic research institutions in Australia, the Netherlands, Switzerland, the United Kingdom, and the United States.
Open-File Report↗
Worldwide directory of national earth-science agencies and related international organizations
Explore the source record for details and available documents.
Circular↗
River discharge to the sea from the shores of the conterminous United States, Alaska, and Puerto Rico: A contribution to the International Hydrological Decade
No abstract available.
Alaska, Puerto Rico↗
Geochemical orientation for mineral exploration in the Hashemite Kingdom of Jordan
This report is a supplement to previous accounts of geochemical exploration conducted in the Hashemite Kingdom of Jordan by the Natural Resources Authority of the Royal Government of Jordan and the U.S. Geological Survey. The field work on which this report is based was sponsored by the U.S. Agency for International Development, U.S. Department of State. Procedures used in collecting various kinds of rocks, ores, slags, eluvial and alluvial sediments, heavy-mineral concentrates, and organic materials for use as geochemical sample media are summarized, as are the laboratory procedures followed for the analysis of these sample materials by semiquantitative spectrographic, atomic absorption, fluorometric, and X-ray diffraction methods. Geochemical evaluations of the possibilities for economic mineral deposits in certain areas are presented. The results of these preliminary investigations open concepts for further use in geochemical exploration in the search for metallic mineral deposits in Jordan. Perhaps the most desirable new activity would be hydrogeochemical exploration for uranium and base metals, accompanied by interpretation of such remote-sensing data as results of airborne radiometric surveys and computer-enhanced LANDSAT imagery. For more conventional approaches to geochemical exploration, however, several fundamental problems regarding proper choice of geochemical sample media for different geologic and geographic parts of the Country must be solved before effective surveys can be made. The present results also show that such common geochemical exploration techniques as the determination of the trace-element contents of soils, plant ash, and slags have direct application also toward the resolution of several archaeological problems in Jordan. These include the relation of trace-elements chemistry of local soils to the composition of botanic remains, the trace-elements composition of slags to the technological development of the extractive metallurgy of copper and iron in the region, and the use of charcoal from slags for the C-14 dating of periods of archaeometallurgical activity. Less directly, interpretations based on the distribution in time and space of the archaeometallurgical activities of the region might add to the knowledge of early climatic conditions and vegetative cover of the area.
Open-File Report↗
Sociocultural and institutional drivers and constraints to mineral supply; the meaning of scarcity in the 21st century: drivers and constraints to the supply of minerals using regional, national and global perspectives
The sociocultural dimensions of mineral supply at the outset of the 21st century are making the supply process increasingly complex. The dimensions encompass legal, financial, environmental, cultural, and global implications of mining, and are driving unprecedented change in the way minerals supply will be accomplished in the future. Minerals scarcity on a global scale is subordinate to other societal issues about mineral resources and reserves estimated to meet society's demands for decades to centuries in the future. This report reviews historical and present-day sociocultural drivers of change, and reactions of the minerals industry to these drivers. It is reflective primarily of conditions in the United States, but also uses examples from other countries. It expresses viewpoints on sociocultural drivers as seen by constituents of the minerals industry and several other communities of interest including Aboriginal peoples, non-government organizations; labor; mining-dependent communities; mining-affected communities; researchers; and government (federal, state/provincial, and local). It provides overviews of the demand for minerals in the United States, and the status of land available for mining. The report uses a case study of a metals mining project in Wisconsin to illustrate specific sociocultural drivers and constraints to minerals supply, and how these influence the minerals industry. Over the past 150 years, a progression of sociocultural movements under the headings of conservationism, environmentalism, and sustainable development have nurtured societal values that have come to influence the mineral supply process in important ways. These movements reflect a continuing tension between the demand for minerals and other resources, and the simultaneous demand for aesthetic, spiritual, ecological, cultural, and other attributes of the land. The tension is an important element in current international debates about the meaning and future of sustainable development. This report focuses on some of the social challenges to the minerals industry to supply minerals, while at the same time providing environmental protection, economic growth, and sociocultural acceptance. All these issues fall under the rubric of sustainable development. It also describes current industry responses to sustainability, including the Global Mining Initiative (2001a), an attempt to introduce major changes in global industry practices to begin the 21st century. This report complements other documents in the series on physical supply, technological advancement, and economic and policy drivers (Wilburn and others, 2001).
Open-File Report↗
A mycosis-like granuloma of fish
Mycoses of systemic distribution are rarely observed in fresh-water fish in this country. In a recent review of atypical cell growths in fishes, Nigrelli cited the only known instance of a mycetoma in a North American fresh-water fish which occurred in the head of fingerling landlocked salmon from an Idaho hatchery. The fungus associated with this granuloma was characterized by a branching septate mycelium. Rucker reported a streptomycete which was pathogenic to blueblack salmon. This organism produced internal nodules containing masses of hyphae but no inflammatory response. A pathogenic fungus has been observed frequently in marine fish, however, and in both marine and fresh-water fish in Europe. This organism was tentatively classified as a Phycomycete in or near the order Chytridiales and was assigned to the genus and species Ichthyophonus hoferi , later reclassified as Ichthyosporidium hoferi . The graduloma described in this report occurs in fresh-water trout and is apparently caused by a budding, yeast-like form with no hyphae which evokes a tremendous inflammatory reaction. Morphologically, the organism does not resemble the previously described Ichthyosporidium. The lesions were first seen accidentally in sections prepared from a diplobacillus infection of brook trout termed “kidney disease.” Subsequently, the granuloma was observed in three widely separated infections involving the diplobacillus in each instance. The histological material was received in a fixed condition; thus, no cultural data was available and the nomenclature and classification of the mycotic organism were not attempted. The present distribution of the disease, however, with its potential threat to domestic fish populations, seemed to warrant a description and discussion of the disease. Efforts are in progress to culture the organism.
Journal of Infectious Diseases↗
One-Water Hydrologic Flow Model: A MODFLOW based conjunctive-use simulation software
The U.S. Geological Survey’s (USGS) Modular Ground-Water Flow Model (MODFLOW-2005) is a computer program that simulates groundwater flow by using finite differences. The MODFLOW-2005 framework uses a modular design that allows for the easy development and incorporation of new features called processes and packages that work with or modify inputs to the groundwater-flow equation. A process solves a flow equation or set of equations. For example, the central part of MODFLOW is the groundwater-flow process that solves the groundwater-flow equation; the surface-water routing process is an additional process that solves the surface-water flow equation. Packages are code related to the groundwater-flow process. For example, the subsidence package modifies the groundwater-flow process by including aquifer compaction effects on flow. With the development of new packages and processes, the MODFLOW-2005 base framework diverged into multiple independent versions designed for specific simulation needs. This divergence limited each independent MODFLOW release to its specific purpose, so that there was no longer a single, comprehensive, general-purpose hydraulic-simulation framework. The MODFLOW One-Water Hydrologic Flow Model (MF-OWHM, also informally known as OneWater) is an integrated hydrologic flow model that combines multiple MODFLOW-2005 variants in one cohesive simulation software; changes were made to enable multiple capabilities in one code. This fusion of the MODFLOW-2005 versions resulted in a simulation software that can be used to address and analyze a wide class of conjunctive-use, water-management, water-food-security, and climate-crop-water scenarios. As a second core version of MODFLOW-2005, MF-OWHM maintains backward compatibility with existing MODFLOW-2005 versions, with features that include the following: Process-based simulation. Saturated groundwater flow (three-dimensional). Surface-water flow (one- and two-dimensional). Stream and river flow. Lake and reservoir storage. Landscape simulation and irrigated agriculture. Land-use and crop simulation. Root uptake of groundwater. Actual evapotranspiration. Estimated irrigation demand. Reservoir operations. Aquifer compaction and subsidence by vertical model-grid deformation. Seawater intrusion by a sharp-interface assumption. Karst-aquifer and fractured-bedrock flow. Turbulent and laminar-pipe network flow. Unsaturated groundwater flow (one-dimensional). Internal linkages among the processes that couple hydraulic head, flow, and deformation. Redesigned code for faster simulation, increased user-input options, easier model updates, and more robust error reporting than in previous models. MF-OWHM is a MODFLOW-2005 based integrated hydrologic model that can simulate and analyze varying environmental conditions to allow for the evaluation of management options from many components of human and natural water movement through a physically based, supply and demand framework. The term “integrated,” in the context of this report, refers to the tight coupling of groundwater flow, surface-water flow, landscape processes, aquifer compaction and subsidence, reservoir operations, and conduit (karst) flow. Another benefit of this integrated hydrologic model is that models developed to run by MODFLOW-2005, MODFLOW-NWT, MODFLOW-CFP, or MODFLOW-FMP can also be simulated with MF-OWHM. At the time of this report’s publication, MF-OWHM version 2 (MF-OWHM2) does not include a direct internal simulation of snowmelt, advanced mountainous watershed rainfall-runoff simulation, detailed shallow soil-moisture accounting, or atmospheric moisture content. Atmospheric moisture may be accounted for indirectly by, optionally, specifying a pan-evaporation rate, reference evapotranspiration, and precipitation. These features are not included to ensure that simulation runtime remains short enough to enable the use of automated methods of calibrating model parameters to field observations, which typically require many simulation model runs. The MF-OWHM approach is to include as much detail as possible to simulate hydrological processes, providing the simulation runtimes remain reasonable enough to allow for robust parameter estimation and model calibration. To represent both natural and human-influenced flow, MF-OWHM integrates physically based flow processes derived from MODFLOW-2005 in a supply and demand framework. From this integration, the physically based movement of groundwater, surface water, imported water, and precipitation serve as supply to meet consumptive demands associated with irrigated and non-irrigated agriculture, natural vegetation, and urban water uses. Water consumption is determined by balancing the available water supply with water demand, leading to the concept of a demand-driven, supply-constrained simulation. The MF-OWHM Supply-and-Demand Framework is especially useful for the analysis of agricultural water use, where there are often few data available to describe changes in land-use through time, such as crop type and distribution, and the associated changes in groundwater pumpage. This framework attempts to satisfy each land-use water demand with available water supplies—that is, groundwater uptake, precipitation, and irrigation. An option provided in MF-OWHM2 is to automatically increase groundwater pumping for irrigation, which often is unknown, by the calculated residual between demand and the other available sources of supply. From large- to small-scale applications, the physically based supply and demand framework provides key capabilities for simulating and analyzing historical, current, and future conjunctive-use of surface water and groundwater. To achieve the physically based supply and demand framework, the MODFLOW-2005 standard of no inter-package and -process communication was relaxed for MF-OWHM2. Traditional MODFLOW simulation models required that all packages and processes interact through the groundwater-flow equation or by removing the water flow from the simulation domain. For example, the MODFLOW-2005 representation of a groundwater well extracts water from the groundwater-flow equation (by subtraction) and removes it from the simulation domain. This feature is available in the MF-OWHM framework, but options have been added to allow the specification of a use or destination of pumped groundwater within the model domain, for example, it can be used for irrigation, managed aquifer recharge, or return-flow to streams.
Techniques and Methods↗
The Confocal Laser Scanning Microscopy Working Group of the ICCP: Final report 2021
This report summarizes the activities and results of the Confocal Laser Scanning Microscopy (CLSM) working group (WG) of the International Committee for Coal and Organic Petrology (ICCP), from its inception in September, 2015, to the present day (September, 2021). The purpose of this report is to document the history of the working group and to compile and evaluate its results. The CLSM WG examined an immature, organic-rich sample of Kimmeridge Clay, which was characterized via CLSM imaging and spectroscopy. In addition, mechanically polished and broad ion beam (BIB) milled sample preparations were characterized via atomic force microscopy. Highlights of findings from the CLSM WG include: the interpreted presence of Botryococcus; incomplete blocking of laser light from highly reflective materials; surface roughening and surface flattening induced by differential BIB milling dependent on location and scale of measurement; substitution of uranium for iron in sulfides; red-shift of reflectance and auto-fluorescence from below the sample surface; positive alteration from laser-induced photo-oxidation of the sample surface including fluorescence blue-shift; blueshift associated to higher fluorescence intensity regions in amorphous organic matter; need for fluorescence spectroscopy standardization as applied via CLSM; and the suitability of CLSM to predict solid bitumen reflectance via calibration to an extant data set. Due to the inability of WG members to continue participating in a WG format, the CLSM WG is hereby finalized. This report represents the final product of WG activity, with the aim to summarize the information included herein for a future peer-reviewed manuscript.
Final Report↗