SEARCH · Search USGS

Results for “China Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources

USGS2020

Rapid geodetic observations of spatiotemporally varying postseismic deformation following the Ridgecrest earthquake sequence: The U.S. Geological Survey response

The U.S. Geological Survey’s geodetic response to the 4–5 July 2019 (Pacific time) Ridgecrest earthquake sequence comprised primarily the installation and/or reoccupation of Global Navigation Satellite System (GNSS) monumentation. Our response focused primarily on the United States’ Navy’s China Lake Naval Air Weapons Station base (NAWSCL). This focus was because much of the surface rupture occurred on the NAWSCL and because of NAWSCL access restrictions only permitting Federal and State of California personnel. In total, we measured or are still measuring at 24 sites, 14 of which were on the NAWSCL and, as of this writing, operational. The majority of sites were set up as continuous stations logging at either 1 sample per second or 1 sample per 15 s. Two stations were recording a 200 m cross‐rupture aperture starting ∼10 hr after the M 6.4 event, and they recorded the coseismic displacements of the M 7.1. Approximately, 1 hr after the M 7.1 event, two new stations were recording a ∼200 m cross‐rupture aperture of the surface rupture. In the days following, we established the rest of the stations ranging to a distance of ∼15 km from the M 7.1 principal rupture trace. The lack of differential displacement across the M 6.4 rupture during the M 7.1 event suggests that it did not reactivate the M 6.4 plane. The lack of differential cross‐fault displacement for both events suggests that rapid shallow afterslip did not occur at those two locations. The postseismic time series from these stations shows centimeters of horizontal displacement over periods of a few months. They record a mixture of fault‐parallel and fault‐normal displacements that, in conjunction with analysis of more spatially complete Interferometric Synthetic Aperture Radar displacement fields, suggest that both poroelastic and afterslip phenomena occur along the M 6.4 and 7.1 rupture planes. Using preliminary data from these and other regional stations, we also explore the Ridgecrest sequence’s effect on regional GNSS time series and the differentiation of long‐term postseismic motions and secular deformation rates. We find that redefining a common‐mode noise filter using different GNSS stations that are assumed to be unaffected by the earthquakes results in small but systematic differences in the regional velocity field estimate.

Seismological Research Letters↗

USGS2006

Geographic information systems (GIS) spatial data compilation of geodynamic, tectonic, metallogenic, mineral deposit, and geophysical maps and associated descriptive data for northeast Asia

This is the online version of a CD-ROM publication. It contains all of the data that are on the disc but extra files have been removed: index files, software installers, and Windows autolaunch files. The purpose of this publication is to provide a high-quality spatial data compilation (Geographical Information System or GIS) of geodynamic, mineral deposit, and metallogenic belt maps, and descriptive data for Northeast Asia for customers and users. This area consists of Eastern Siberia, Russian Far East, Mongolia, northern China, South Korea, and Japan. The GIS compilation contains integrated spatial data for: (1) a geodynamics map at a scale of 1:5,000,000; (2) a mineral deposit location map; (3) metallogenic belt maps; (4) detailed descriptions of geologic units, including tectonostratigraphic terranes, cratons, major melange zones, and overlap assemblages, with references; (5) detailed descriptions of metallogenic belts with references; (6) detailed mineral deposit descriptions with references; and (7) page-size stratigraphic columns for major terranes.

Open-File Report↗

USGS2011

Mineral resource of the month: rare earth elements

The article provides information on rare earth elements, which are group of 17 natural metallic elements. The rare earth elements are scandium, yttrium and lanthanides and classified into light rare earth elements (LREE) and heavy rate earth elements (HREE). The principal ores of the rare earth elements are identified. An overview of China's production of 97 percent of the rare earths in the world is provided. Commercial applications of rare earths are described.

Earth↗

USGS1994

Comparison of current meters used for stream gaging

The U.S. Geological Survey (USGS) is field and laboratory testing the performance of several current meters used throughout the world for stream gaging. Meters tested include horizontal-axis current meters from Germany, the United Kingdom, and the People's Republic of China, and vertical-axis and electromagnetic current meters from the United States. Summarized are laboratory test results for meter repeatability, linearity, and response to oblique flow angles and preliminary field testing results. All current meters tested were found to under- and over-register velocities; errors usually increased as the velocity and angle of the flow increased. Repeatability and linearity of all meters tested were good. In the field tests, horizontal-axis meters, except for the two meters from the People's Republic of China, registered higher velocity than did the vertical-axis meters.

Conference Paper↗

USGS2010

The principal rare earth elements deposits of the United States: A summary of domestic deposits and a global perspective

The rare earth elements (REE) are fifteen elements with atomic numbers 57 through 71, from lanthanum to lutetium ('lanthanides'), plus yttrium (39), which is chemically similar to the lanthanide elements and thus typically included with the rare earth elements. Although industrial demand for these elements is relatively small in tonnage terms, they are essential for a diverse and expanding array of high-technology applications. REE-containing magnets, metal alloys for batteries and light-weight structures, and phosphors are essential for many current and emerging alternative energy technologies, such as electric vehicles, energy-efficient lighting, and wind power. REE are also critical for a number of key defense systems and other advanced materials. Section 843 of the National Defense Authorization Act for Fiscal Year 2010, Public Law 111-84, directs the Comptroller General to complete a report on REE materials in the defense supply chain. The Office of Industrial Policy, in collaboration with other U.S. Government agencies, has initiated (in addition to this report) a detailed study of REE. This latter study will assess the Department of Defense's use of REE, as well as the status and security of domestic and global supply chains. That study will also address vulnerabilities in the supply chain and recommend ways to mitigate any potential risks of supply disruption. To help conduct this study, the Office of Industrial Policy asked the U.S. Geological Survey (USGS) to report on domestic REE reserves and resources in a global context. To this end, the enclosed report is the initial USGS contribution to assessing and summarizing the domestic REE resources in a global perspective. In 2009, the Mineral Resources Program of the USGS organized a new project under the title Minerals at Risk and For Emerging Technologies in order to evaluate mineral resource and supply issues of rare metals that are of increasing importance to the national economy. Leaders and members of this project, with the assistance of the USGS National Minerals Information Center, prepared the enclosed USGS report on domestic REE resources. The USGS Mineral Resources Program has investigated domestic and selected foreign REE resources for many decades, and this report summarizes what has been learned from this research. The USGS National Minerals Information Center (formerly Minerals Information Team) has monitored global production, trade, and resources for an equally long period and is the principal source of statistics used in this report. The objective of this study is to provide a nontechnical overview of domestic reserves and resources of REE and possibilities for utilizing those resources. At the present time, the United States obtains its REE raw materials from foreign sources, almost exclusively from China. Import dependence upon a single country raises serious issues of supply security. In a global context, domestic REE resources are modest and of uncertain value; hence, available resources in traditional trading partners (such as Canada and Australia) are of great interest for diversifying sources of supply. This report restates basic geologic facts about REE relevant to assessing security of supply, followed by a review of current United States consumption and imports of REE, current knowledge of domestic resources, and possibilities for future domestic production. Further detail follows in a deposit-by-deposit review of the most significant domestic REE deposits (see index map). Necessary steps to develop domestic resources are discussed in a separate section, leading into a review of current domestic exploration and a discussion of the value of a future national mineral resource assessment of REE. The report also includes an overview of known global REE resources and discusses the reliability of alternative foreign sources of REE.

Scientific Investigations Report↗

USGS2001

Cranes in East Asia; Proceedings of the symposium held in Harbin, People's Republic of China, June 9-18, 1998

Introductory Remarks (R.C. Stendell): I appreciate the opportunity to be in Harbin and participate in the International Scientific Workshop on Cranes in East Asia. I would like to provide some background information on how this meeting came to be. Almost one year ago, in July 1997, Dr. Kun John of the Seoul National University contacted the U.S. Geological Survey’s Midcontinent Ecological Science Center (MESC) requesting that we host a meeting of scientists from the Republic of Korea (ROK) and the Democratic People’s Republic of Korea (DPRK) to discuss the biology and ecology of cranes on the Korean peninsula. Dr. John and his colleagues expressed concern about three species of cranes that migrate up and down the Korean peninsula and use the Demilitarized Zone. The species of interest are the Red-crowned Crane, White-naped Crane, and the Hooded Crane. The primary question was the conservation of these species in this part of the world. Another concern involved exploring potential economic values and opportunities associated with these species. Richard Johnson, an economist at MESC, assumed responsibility as the primary MESC contact to help bring about this meeting.

Open-File Report↗

USGS2021

A U.S.-China EcoPartnership study of disturbed wetland vegetation in West Dongting Lake, China

West Dongting Lake in China is important for human livelihoods and habitat of migratory waterfowl and other wildlife. The waterway re-engineering and agriculture intensification have contributed to changes in hydrology, sediment, and vegetation on the floodplain. This paper describes an EcoPartnership program conducted by the U.S. Geological Survey, Wetland and Aquatic Research Center, and Beijing Forestry University. It focused on the development of a wetland ecosystem network in West Dongting Lake with technical support from the U.S. partner using a number of related studies to examine wetland vegetation dynamics from upstream to downstream along the tributaries. The results of U.S. studies showed that the regeneration potential of species might be altered by changes in climate and local environment, and seed bank depletion by germination may be a major conservation threat in a future with recurring droughts in swamps of the southeastern United States. In the monsoonal wetlands of West Dongting Lake, the soil seed bank could be used as a seed source for revegetation after hydrologic restoration with the introduction of certain foundational species and the removal of poplar plantations. Also, West Dongting Lake is at high ecological risk of mercury pollution. Wetland ecosystem monitoring may allow managers to use the information to predict effects of climate change, water level and flow changes on sedimentation, and to manage for desired vegetation to support waterfowl and ecosystem services. The cooperation of two countries through the EcoPartnership program is now well established and poised for extensive research projects in the future.

West Dongting Lake↗

USGS1992

International strategic minerals inventory summary report; vanadium

Major world resources of vanadium are described in this summary report of information in the International Strategic Minerals Inventory (ISMI). ISMI is a cooperative data-collection effort of earth-science and mineral-resource agencies in Australia, Canada, the Federal Republic of Germany, the Republic of South Africa, the United Kingdom, and the United States of America. This report, designed to benefit geologists and policy analysts, contains two parts. Part I presents an overview of the resources and potential supply of vanadium based on inventory information. Part II contains tables of some geologic information and mineral-resource and production data collected by ISMI participants. Vanadium's greatest application is as an additive in steel. During 1984, for example, 90 percent of the vanadium produced in the world was consumed in steelmaking. The Soviet Union and China are the only major steel producers of the world that meet significant proportions of their vanadium needs from domestic sources, albeit from relatively low-grade ores. Reliable economically exploitable world resources total greater than 22 million metric tons of vanadium pentoxide. Deposits of the titaniferous magnetite type are the most economically important, and of these the Bushveld Complex of South Africa is the principal vanadium resource. The high-grade tenor of the Bushveld ore renders South Africa the world's leader in vanadium resources and production. Present (1990) major primary production is confined to only four countries: South Africa, the Soviet Union (low-grade ore), the Peoples Republic of China (low-grade ore), and the United States (partly from imported materials). This production trend is likely to continue for many years.

Circular↗

USGS2017

Critical mineral resources of the United States—Economic and environmental geology and prospects for future supply

Summary Mineral commodities are vital for economic growth, improving the quality of life, providing for national defense, and the overall functioning of modern society. Minerals are being used in larger quantities than ever before and in an increasingly diverse range of applications. With the increasing demand for a considerably more diverse suite of mineral commodities has come renewed recognition that competition and conflict over mineral resources can pose significant risks to the manufacturing industries that depend on them. In addition, production of many mineral commodities has become concentrated in relatively few countries (for example, tungsten, rare-earth elements, and antimony in China; niobium in Brazil; and platinum-group elements in South Africa and Russia), thus increasing the risk for supply disruption owing to political, social, or other factors. At the same time, an increasing awareness of and sensitivity to potential environmental and health issues caused by the mining and processing of many mineral commodities may place additional restrictions on mineral supplies. These factors have led a number of Governments, including the Government of the United States, to attempt to identify those mineral commodities that are viewed as most “critical” to the national economy and (or) security if supplies should be curtailed. This book presents resource and geologic information on the following 23 mineral commodities currently among those viewed as important to the national economy and national security of the United States: antimony (Sb), barite (barium, Ba), beryllium (Be), cobalt (Co), fluorite or fluorspar (fluorine, F), gallium (Ga), germanium (Ge), graphite (carbon, C), hafnium (Hf), indium (In), lithium (Li), manganese (Mn), niobium (Nb), platinum-group elements (PGE), rare-earth elements (REE), rhenium (Re), selenium (Se), tantalum (Ta), tellurium (Te), tin (Sn), titanium (Ti), vanadium (V), and zirconium (Zr). For a number of these commodities—for example, graphite, manganese, niobium, and tantalum—the United States is currently wholly dependent on imports to meet its needs. The first two chapters (A and B) deal with general information pertinent to the study of mineral resources. Chapters C through V describe individual mineral commodities and include an overview of current uses of the commodity, identified resources and their distribution nationally and globally, the state of current geologic knowledge, the potential for finding additional deposits nationally and globally, and geoenvironmental issues that may be related to the production and uses of the commodity. These chapters are updates of the commodity chapters published in 1973 in U.S. Geological Survey Professional Paper 820, “United States Mineral Resources.”

Professional Paper↗

USGS2016

Geomorphic and geologic controls of geohazards induced by Nepal’s 2015 Gorkha earthquake

The Gorkha earthquake (magnitude 7.8) on 25 April 2015 and later aftershocks struck South Asia, killing ~9000 people and damaging a large region. Supported by a large campaign of responsive satellite data acquisitions over the earthquake disaster zone, our team undertook a satellite image survey of the earthquakes’ induced geohazards in Nepal and China and an assessment of the geomorphic, tectonic, and lithologic controls on quake-induced landslides. Timely analysis and communication aided response and recovery and informed decision-makers. We mapped 4312 coseismic and postseismic landslides. We also surveyed 491 glacier lakes for earthquake damage but found only nine landslide-impacted lakes and no visible satellite evidence of outbursts. Landslide densities correlate with slope, peak ground acceleration, surface downdrop, and specific metamorphic lithologies and large plutonic intrusions.

Science↗

USGS1999

Paleomagnetic and palynologic analyses of Albian to Santonian strata at Bayn Shireh, Burkhant, and Khuren Dukh, eastern Gobi Desert, Mongolia

Cretaceous terrestrial sediments deposited in a series of intracratonic basins across the Gobi Desert region of southern Mongolia and northern China contain a unique and diverse vertebrate fauna. In 1996 an expedition jointly sponsored by the Mongolian Paleontological Center and the Hayashibara Museum of Natural Sciences revisited a number of famous vertebrate fossil localities in the eastern Gobi region of Mongolia and, as part of a broad geological and paleontological study, collected a series of paleomagnetic samples from measured sections at Bayn Shireh, Burkhant and Khuren Dukh, as well as from an unmeasured locality adjacent to Khuren Dukh. Expedition members also collected palynologic samples from Khuren Dukh and the adjacent locality. Paleomagnetic analysis shows that all the sites from which samples were collected display detrital remnant magnetization that is consistently normal in polarity. The measured Cretaceous magnetic directions are oriented to the east or northeast of the present day expected direction (declination 356.2??, inclination 65.2??), and they are wholly concordant with that expected for a mid-latitude Northern Hemisphere sampling locality, and with the directions for this period reported by other workers. These results, when considered in tandem with the known biostratigraphy, strongly suggest that the sedimentary deposits at all four localities in the eastern Gobi correlate to the normal polarity chron 34 (the Cretaceous Long Normal), which ranges in age from approximately 121 to 83.5 million years. Previous vertebrate, invertebrate and palynological data from Khuren Dukh suggest that the lower and middle parts of the stratigraphic interval exposed there (which have been assigned to the Shinekhudag Formation) are 'Khukhtekian' in age and correspond to the Aptian-Albian interval that can be broadly correlated to the older, Early Cretaceous part of the Cretaceous Long Normal, C34n. New palynologic data presented here indicate that these strata are no older than middle to late Albian. The rocks at Bayn Shireh (the Bayn Shireh Formation) have been assigned a 'Baynshirenian' biostratigraphic age that may range from Cenomanian to early Campanian. The magnetostratigraphy results presented here indicate that the strata at both the Bayn Shireh and Burkhant localities do not cross the Santonian/Campanian Stage boundary, however, as this is believed to lie at, or very near, the C34n/C33r reversal boundary. Thus, the Bayn Shireh Formation was most likely deposited near the end of the Cretaceous Long Normal Interval, no later than the latest Santonian.

Cretaceous Research↗

USGS2022

Tungsten skarn potential of the Yukon-Tanana Upland, eastern Alaska, USA—A mineral resource assessment

Tungsten (W) is used in a variety of industrial and technological applications and has been identified as a critical mineral for the United States, India, the European Union, and other countries. These countries rely on W imports mostly from China, which leaves them vulnerable to supply disruption. Consequently, the U.S. government has a current initiative to understand domestic resource potential. The eastern Alaska portion of the Yukon-Tanana Upland (YTU), is prospective for W skarn deposits, the major source of global W supply. The regional geology consists of juxtaposed Paleozoic lithotectonic packages that were reaccreted to North America in the Mesozoic . Multiple subsequent episodes of arc-related magmatism intruded the lithotectonic packages, accompanied by W skarn formation mostly associated with 100–90 Ma intrusions; major W skarn deposits in Canada are part of the same metallogenic event (e.g., Mactung, Cantung). In this paper, we present an assessment for undiscovered W skarn resources for parts of the lesser-explored western (Alaskan) portion of the YTU. We used GIS proximity analysis to map the intersection of pluton and carbonate-bearing rocks to define three permissive tracts for W skarn deposits. The permissive tracts were qualitatively assessed by mineral potential mapping using region-wide sediment geochemistry and mineral concentrate datasets. This analysis showed that much of the western YTU has high potential for undiscovered W skarn deposits, whereas the eastern and southern YTU had only isolated areas of medium to high potential. Historical production and the quality of the geochemistry data of the western YTU tract (ca. 9200 km 2 ) permitted a quantitative assessment of undiscovered W resources. Probabilistic estimates by a panel of 20 experts predicted a 70% chance of one to three undiscovered W skarn deposits in the western YTU tract. The rationale for favorability employed by the expert panel included favorable lithology, previous production, clustering of previously mined deposits, W placers in the area, lack of recent exploration, pan concentrates containing W minerals, and W geochemical anomalies. Estimates were combined with a global grade and tonnage model for W skarns in a Monte Carlo simulation and provided a median estimate of undiscovered resources of 94 kt WO 3 . If the undiscovered W skarn deposits are located close to infrastructure (e.g., near Fairbanks, or close to roads and/or power grid), application of an economic filter indicates that the median total economically recoverable WO 3 is 63 kt with a net present value (NPV) of $330 million USD (2008 dollars). Whereas if deposits are far from infrastructure, median recoverable WO 3 is only 30 kt and the NPV is $44 million. Our models for contained WO 3 resources and NPV estimates for the western YTU tract are considerably lower than the known resources in skarns in adjacent areas in Canada. Estimates for the western YTU are also lower than preliminary estimates for undiscovered W skarn deposits in areas of the western conterminous United States. We speculate that lower permeability and continuity of favorable carbonate rock horizons in the relatively higher-grade metamorphic country rocks in the Alaska portion of the YTU may explain some of the differences in prospectivity. More detailed geologic mapping, modern geochemistry, and geophysical surveys are needed to refine the resource potential of the whole YTU. Regardless, quantitative mineral resource assessment provides a useful tool for making first-order regional estimates of undiscovered resources, identifying target areas for new data acquisition, and guiding research on the fundamental controls of district-scale metallogenic endowments.

Alaska↗

USGS2018

Rayleigh wave ellipticity measurement uncertainty across the IRIS/USGS and New China Digital Seismograph Networks

Long-period Rayleigh wave horizontal to vertical amplitude (H/V) ratios at a station provide information about local earth structure that is complementary to phase velocity. However, a number of studies have observed that significant scatter appears in these measurements making it difficult to use H/V ratio measurements to resolve earth structure. Some of the scatter in these measurements has been attributed to local geological structure while some has remained unaccounted for. Most Global Seismographic Network (GSN) stations contain two nearby high-quality broad-band seismometers (e.g. in the same vault, but on different piers or in different boreholes). For each broad-band sensor in the IRIS/USGS component of the GSN, we estimate H/V ratios of fundamental mode Rayleigh waves using M > 6.5 earthquakes from 2001 to 2018 (around 19 000 measurements). We compute these ratios at a number of discrete periods (25, 50, 75, 100 and 150 s) and find that for well-isolated Rayleigh waves (windows where the correlation coefficients between radial and the phase-shifted vertical components are greater than 0.9) significant scatter in H/V ratios occurs between colocated sensors (greater than 25 per cent at 100 s period). This suggests the scatter in H/V ratio measurements can be at least partially attributed to extremely local phenomena such as sensor emplacement in the vault. We also find that H/V ratios can vary as a function of event backazimuth, indicating that care must be taken when computing average ratios for a station, as a large number of events from a given region could bias H/V ratio measurements at a station.

Geophysical Journal International↗

USGS2017

Rare-earth elements

The rare-earth elements (REEs) are 15 elements that range in atomic number from 57 (lanthanum) to 71 (lutetium); they are commonly referred to as the “lanthanides.” Yttrium (atomic number 39) is also commonly regarded as an REE because it shares chemical and physical similarities and has affinities with the lanthanides. Although REEs are not rare in terms of average crustal abundance, the concentrated deposits of REEs are limited in number. Because of their unusual physical and chemical properties, the REEs have diverse defense, energy, industrial, and military technology applications. The glass industry is the leading consumer of REE raw materials, which are used for glass polishing and as additives that provide color and special optical properties to the glass. Lanthanum-based catalysts are used in petroleum refining, and cerium-based catalysts are used in automotive catalytic converters. The use of REEs in magnets is a rapidly increasing application. Neodymium-iron-boron magnets, which are the strongest known type of magnets, are used when space and weight are restrictions. Nickel-metal hydride batteries use anodes made of a lanthanum-based alloys. China, which has led the world production of REEs for decades, accounted for more than 90 percent of global production and supply, on average, during the past decade. Citing a need to retain its limited REE resources to meet domestic requirements as well as concerns about the environmental effects of mining, China began placing restrictions on the supply of REEs in 2010 through the imposition of quotas, licenses, and taxes. As a result, the global rare-earth industry has increased its stockpiling of REEs; explored for deposits outside of China; and promoted new efforts to conserve, recycle, and substitute for REEs. New mine production began at Mount Weld in Western Australia, and numerous other exploration and development projects noted in this chapter are ongoing throughout the world. The REE-bearing minerals are diverse and often complex in composition. At least 245 individual REE-bearing minerals are recognized; they are mainly carbonates, fluorocarbonates, and hydroxylcarbonates (n = 42); oxides (n = 59); silicates (n = 85); and phosphates (n = 26). Many of the world’s significant REE deposits occur in carbonatites, which are carbonate igneous rocks. The REEs also have a strong genetic association with alkaline magmatism. The systematic geologic and chemical processes that explain these observations are not well understood. Economic or potentially economic REE deposits have been found in (a) carbonatites, (b) peralkaline igneous systems, (c) magmatic magnetite-hematite bodies, (d) iron oxide-copper-gold (IOCG) deposits, (e) xenotime-monazite accumulations in mafic gneiss, (f) ion-absorption clay deposits, and (g) monazite-xenotime-bearing placer deposits. Carbonatites have been the world’s main source for the light REEs since the 1960s. Ion-adsorption clay deposits in southern China are the world’s primary source of the heavy REEs. Monazite-bearing placer deposits were important sources of REEs before the mid-1960s and may be again in the future. In recent years, REEs have been produced from large carbonatite bodies mined at the Mountain Pass deposit in California and, in China, at the Bayan Obo deposit in Nei Mongol Autonomous Region, the Maoniuping deposit in Sichuan Province, the Daluxiang deposit in Sichuan Province, and the Weishan deposit in Anhui Province. Alkaline igneous complexes have recently been targeted for exploration because of their enrichments in the heavy REEs. Information relevant to the environmental aspects of REE mining is limited. Little is known about the aquatic toxicity of REEs. The United States lacks drinking water standards for REEs. The concentrations of REEs in environmental media are influenced by their low abundances in crustal rocks and their limited solubility in most groundwaters and surface waters. The scarcity of sulfide minerals, including pyrite, minimizes or eliminates concerns about acid-mine drainage for carbonatite-hosted deposits and alkaline-intrusion-related REE deposits. For now, insights into environmental responses of REE mine wastes must rely on predictive models.

Professional Paper↗

USGS2014

Occurrence model for magmatic sulfide-rich nickel-copper-(platinum-group element) deposits related to mafic and ultramafic dike-sill complexes

Magmatic sulfide deposits containing nickel (Ni) and copper (Cu), with or without (±) platinum-group elements (PGE), account for approximately 60 percent of the world’s nickel production. Most of the remainder of the Ni production is derived from lateritic deposits, which form by weathering of ultramafic rocks in humid tropical conditions. Magmatic Ni-Cu±PGE sulfide deposits are spatially and genetically related to bodies of mafic and/or ultramafic rocks. The sulfide deposits form when the mantle-derived mafic and/or ultramafic magmas become sulfide-saturated and segregate immiscible sulfide liquid, commonly following interaction with continental crustal rocks. Deposits of magmatic Ni-Cu sulfides occur with mafic and/or ultramafic bodies emplaced in diverse geologic settings. They range in age from Archean to Tertiary, but the largest number of deposits are Archean and Paleoproterozoic. Although deposits occur on most continents, ore deposits (deposits of sufficient size and grade to be economic to mine) are relatively rare; major deposits are present in Russia, China, Australia, Canada, and southern Africa. Nickel-Cu sulfide ore deposits can occur as single or multiple sulfide lenses within mafic and/or ultramafic bodies with clusters of such deposits comprising a district or mining camp. Typically, deposits contain ore grades of between 0.5 and 3 percent Ni and between 0.2 and 2 percent Cu. Tonnages of individual deposits range from a few tens of thousands to tens of millions of metric tons (Mt) bulk ore. Two giant Ni-Cu districts, with ≥10 Mt Ni, dominate world Ni sulfide resources and production. These are the Sudbury district, Ontario, Canada, where sulfide ore deposits are at the lower margins of a meteorite impact-generated igneous complex and contain 19.8 Mt Ni; and the Noril’sk-Talnakh district, Siberia, Russia, where the ore deposits are in subvolcanic mafic intrusions related to flood basalts and contain 23.1 Mt Ni. In the United States, the Duluth Complex in Minnesota, comprised of a group of mafic intrusions related to the 1.1 Ga Midcontinent Rift system, represents a major Ni resource of 8 Mt Ni, but deposits generally exhibit low grades (0.2 percent Ni, 0.66 percent Cu) and remain in the process of being proven economic. The sulfides in magmatic Ni-Cu deposits generally constitute a small volume of the host rock(s) and tend to be concentrated in the lower parts of the mafic and/or ultramafic bodies, often in physical depressions or areas marking changes in the geometry of the footwall topography. In most deposits, the sulfide mineralization can be divided into disseminated, matrix or net, and massive sulfide, depending on a combination of the sulfide content of the rock and the silicate texture. The major Ni-Cu sulfide mineralogy typically consists of an intergrowth of pyrrhotite (Fe 7 S 8 ), pentlandite ([Fe, Ni] 9 S 8 ), and chalcopyrite (FeCuS 2 ). Cobalt, PGE, and gold (Au) are extracted from most magmatic Ni-Cu ores as byproducts, although such elements can have a significant impact on the economics in some deposits, such as the Noril’sk-Talnakh deposits, which produce much of the world’s palladium. In addition, deposits may contain between 1 and 15 percent magnetite associated with the sulfides.

Scientific Investigations Report↗

USGS2017

Antimony

Antimony is an important mineral commodity used widely in modern industrialized societies. The element imparts strength, hardness, and corrosion resistance to alloys that are used in many areas of industry, including in lead-acid storage batteries. Antimony’s leading use is as a fire retardant in safety equipment and in household goods, such as mattresses. The U.S. Government has considered antimony to be a critical mineral mainly because of its use in military applications. The great majority of the world’s antimony comes from China, and much of the remainder is shipped to China for smelting. Antimony resources are unevenly distributed around the world. China has the bulk of the world’s identified resources; other countries that have identified antimony resources include Bolivia, Canada, Mexico, Russia, South Africa, Tajikistan, and Turkey. Resources in the United States are located mainly in Alaska, Idaho, Montana, and Nevada. The most significant antimony mineral deposits occur in geologic environments with a thick sequence of siliciclastic sedimentary rocks in areas with significant fault and fracture systems. The most common antimony ore mineral is stibnite (Sb2 S3 ), but more than 100 other minerals also contain antimony. The presence of antimony in surface waters and groundwaters results primarily from rock weathering, soil runoff, and anthropogenic sources. Global emissions of antimony to the atmosphere average 6,100 metric tons per year. Empirical data suggest that the acid-generating potential of antimony mine waste is low.

Professional Paper↗

USGS2019

Morphology and genesis of giant seafloor depressions on the southeasterncontinental shelf of the Korean Peninsula

We identify and describe five giant seafloor depressions from the southeastern continental shelf of the Korean Peninsula using multibeam bathymetry, sub-bottom profiler, and multi-channel seismic reflection data, supplemented by piston cores. Multibeam bathymetry data from the shelf show four crescent-shaped depressions (SD1 to SD4) and one near-circular depression (SD5) within a group of NW-SE trending depressions, the largest covering an area of about 7 km 2 on the seafloor. The depressions reach up to ~4.5 km in width and ~2 km in length and have asymmetric cross-sections. Some have depths as large as 40 m below the surrounding seafloor with walls as steep as 45°. The depressions are confined to water depths between 130 and 170 m and bounded on the north by a large submarine channel that was plausibly formed by fluvial or tidal processes during the Last Glacial Maximum (LGM) sea-level lowstand. Multi-channel seismic and sub-bottom profiler data reveal truncated depression walls and the presence of sediment drift deposits within the depressions, indicating that both erosion and deposition are active processes. Flaser and lenticular bedding in the cored drift deposits along with variable grain size (ranging between ~2.6 phi and ~4.3 phi) are diagnostic features of the bottom currents influenced by tidal forces. Depressions SD1 to SD4 lack evidence of fluid or gas escape. In contrast, many features of depression SD5 are characteristic of gas escapes and blowouts, including acoustic anomalies, a 20-m-high carbonate mound or carbonate-encrusted mound, and mud dikes and mud patches in cores. Based on the SD5 example, we think it is likely that the other crescent-shaped seafloor depressions formed originally as pockmarks by gas/fluid venting, and have since become inactive. The pockmarks represent zones of weakened sediment that were eroded, expanded, and merged by bottom currents to form larger seafloor depressions. Modern currents are strong enough to transport shelf sediments, and these currents were probably much stronger at lower sea levels when the Korea Strait was a more restricted passage between the East China Sea and East Sea.

Korea Strait↗

USGS1994

Seismic velocities and geologic logs from boreholes at three downhole arrays in San Francisco, California

The Loma Prieta earthquake of October 17, 1989 (1704 PST), has reinforced observations made by Wood and others (1908) after the 1906 San Francisco earthquake, that poor ground conditions (soft soil) increase the likelihood of shaking damage to structures. Since 1908 many studies (for example Borcherdt, 1970, Borcherdt and Gibbs, 1976, Borcherdt and Glassmoyer, 1992) have shown that soft soils amplify seismic waves at frequencies that can be damaging to structures. Damage in the City of San Francisco from the Loma Prieta earthquake was concentrated in the Marina District, the Embarcadero, and the China Basin areas. Each of these areas, to some degree, is underlain by soft soil deposits. These concentrations of damage raise important questions regarding the amplification effects of such deposits at damaging levels of motion. Unfortunately, no strong-motion recordings were obtained in these areas during the Loma Prieta earthquake and only a limited number (< 10) have been obtained on other soft soil sites in the United States. Consequently, important questions exist regarding the response of such deposits during damaging earthquakes, especially questions regarding the nonlinear soil response. Towards developing a data set to address these important questions, borehole strong-motion arrays have been installed at three locations. These arrays consist of groups of wide-dynamic-range pore-pressure transducers and three-component accelerometers, the outputs of which are recorded digitally. The arrays are designed to provide an integrated set of data on ground shaking, liquifaction-induced ground failure, and structural response. This report describes the detailed geologic, seismic, and material-property determinations derived at each of these sites.

California↗