Search USGS⌕ Search

SEARCH · Search USGS

Results for “Scientific Investigations Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89Linked to original sources
USGS2022

Groundwater hydrology in the area of Savannah and Gunstocker Creeks in northeastern Hamilton, southern Meigs, and northwestern Bradley Counties, Tennessee, 2007–09

The U.S. Geological Survey, in cooperation with the Savannah Valley Utility District, evaluated the groundwater hydrology of the Valley and Ridge carbonate rock aquifer in northeastern Hamilton, southern Meigs, and northwestern Bradley Counties, Tennessee, from 2007 through 2009. The evaluation included, and built on, the results of test drilling conducted in the area in 1974 to determine the potential for groundwater as a source of public supply for the utility and the results of an investigation conducted to define recharge areas for wells used by groundwater-source public-supply water systems throughout Hamilton County in the early 1990s. Groundwater-level data collected from wells open to the aquifer in the study area were used to prepare potentiometric-surface maps for fall 1992, spring and fall 1993, summer 2008, and spring 2009 conditions. Two primary groundwater basins were delineated from the maps—the larger of which coincides with the watershed of Savannah Creek in the southern part of the study area and the smaller of which coincides with the watershed of Gunstocker Creek in the northern part of the study area. Both basins are characterized by potentiometric surfaces that contain a central area of low-altitude groundwater levels and low gradients relative to the basin margins that reflect the orientation of enhanced permeability along dissolution-enlarged features that have developed parallel to strike in the aquifer. The recharge area of the Savannah Creek groundwater basin is estimated to be about 31 square miles, and the recharge area of the Gunstocker Creek groundwater basin is estimated to be about 17 square miles. Recharge to the aquifer in the Savannah Creek and Gunstocker Creek groundwater basins primarily occurs in the uplands area along White Oak Mountain in the eastern part of the study area and along the western boundaries of the basins. Groundwater flows toward the potentiometric lows in each basin, discharging as base flow to the streams and to springs locally. Groundwater withdrawals for public supply by the utility influence the potentiometric low in the north-central part of the Savannah Creek groundwater basin and disrupt flow in the creek and nearby Anderson Spring, particularly during the summer and fall seasons. No large groundwater withdrawals currently occur in the Gunstocker Creek basin, but there is potential for groundwater supply development in the basin. A conceptual model of the groundwater hydrology of the area developed from the evaluation indicates that Chickamauga Lake is the base-level control on groundwater discharge from the Savannah Creek and Gunstocker Creek basins and that lake stage affects the potentiometric surfaces and groundwater discharge in the most downgradient parts of the basins as a result of inferred hydraulic connection between the aquifer and the lake. The model also infers that captured surface water from sections of Savannah Creek and the Hiwassee River that are embayed by the lake could recharge the aquifer and serve as a source of water withdrawn by wells in each basin if the potentiometric surfaces were lowered to altitudes less than the stage of the lake, particularly under potential future groundwater-development scenarios in the Gunstocker Creek basin. Geochemical analysis of samples collected from six wells for the study indicate that groundwater in the Valley and Ridge aquifer in the area generally is a calcium-magnesium-bicarbonate type, and although the water generally is hard, it is suitable for most uses. Trace-element concentrations were less than primary drinking-water criteria in all the samples. Results of the investigation indicate that options are available for additional groundwater withdrawal in the study area. Water-level data collected since 1975 at the Savannah Valley Utility District Smith Road well site indicate that some additional amount of groundwater is available for withdrawal from the aquifer in the Savannah Creek groundwater basin. The potentiometric low within the Gunstocker Creek groundwater basin indicates that an area with enhanced permeability is present as a northeastern counterpart to the potentiometric low within the Savannah Creek basin. Because the Gunstocker Creek basin is about one-half the total area of the Savannah Creek basin, a commensurate decrease in available groundwater storage is likely. Furthermore, groundwater withdrawal locations in the Gunstocker Creek basin would be closer to—and possibly connected hydraulically to—the Hiwassee River, thus increasing the potential for induced surface-water recharge in the basin if sustained drawdown from pumping lowered groundwater levels to altitudes less than the stage of the river.

Tennessee↗
USGS2016

Bathymetric and velocimetric surveys at highway bridges crossing the Missouri River near Kansas City, Missouri, June 2–4, 2015

Bathymetric and velocimetric data were collected by the U.S. Geological Survey, in cooperation with the Missouri Department of Transportation, near 8 bridges at 7 highway crossings of the Missouri River in Kansas City, Missouri, from June 2 to 4, 2015. A multibeam echosounder mapping system was used to obtain channel-bed elevations for river reaches ranging from 1,640 to 1,660 feet longitudinally and extending laterally across the active channel from bank to bank during low to moderate flood flow conditions. These bathymetric surveys indicate the channel conditions at the time of the surveys and provide characteristics of scour holes that may be useful in the development of predictive guidelines or equations for scour holes. These data also may be useful to the Missouri Department of Transportation as a low to moderate flood flow comparison to help assess the bridges for stability and integrity issues with respect to bridge scour during floods. Bathymetric data were collected around every pier that was in water, except those at the edge of water or surrounded by a debris raft, and scour holes were observed at most surveyed piers. The observed scour holes at the surveyed bridges were examined with respect to shape and depth. Although exposure of parts of substructural support elements was observed at several piers, the exposure likely can be considered minimal compared to the overall substructure that remains buried in bed material at these piers. The frontal slope values determined for scour holes observed in the current (2015) study generally are similar to recommended values in the literature and values determined for scour holes in previous bathymetric surveys. Several of the structures had piers that were skewed to primary approach flow, and generally the scour hole was deeper and longer on the side of the pier with impinging flow, with some amount of deposition on the leeward side, typical of conditions observed at piers skewed to approach flow; however, at structure A7650 (site 10), the scour hole was deeper and longer on the leeward side of the pier, possibly because of a deflection and contraction of flow caused by a protrusion of the corresponding bank at the bridge. Previous bathymetric surveys exist for all the sites examined in this study. Comparisons between bathymetric surfaces from the previous surveys (in March 2010 and during the 2011 flood) and those of this study do not indicate any consistent correlation in channel-bed elevations with flow conditions. A simplified assumption of equal to lesser magnitude scour for the lower discharge in the 2015 surveys did not consistently prove to be true, particularly in respect to the depth of observed scour near the piers when compared to results collected during the 2011 flood. A local spatial minimum average channel-bed elevation at structure A7650 (site 10) compared to adjacent sites may indicate this site is at or near a local feature that controls sediment deposition and scour. The average channel-bed elevation values and the distribution of channel-bed elevations imply that sediment unable to deposit near structure A7650 is flushed downstream and deposits at the next downstream site, structure A5817 (site 11).

Missouri↗
USGS2006

Development and application of a screening model for simulating regional ground-water flow in the St. Croix River basin, Minnesota and Wisconsin

A series of databases and an accompanying screening model were constructed by the U.S. Geological Survey, in cooperation with the National Park Service, to better understand the regional ground-water-flow system and its relation to stream drainage in the St. Croix River Basin. The St. Croix River and its tributaries drain about 8,000 square miles in northeastern Minnesota and northwestern Wisconsin. The databases contain information for the entire St. Croix River Basin pertaining to well logs, lithology, thickness of lithologic groups, ground-water levels, streamflow, and well pumpage. Maps and generalized cross sections created from the compiled data show the lithologic groups, extending from the water table to the crystalline bedrock, through which ground water flows. These lithologic groups are: fine-grained unconsolidated deposits; coarse-grained unconsolidated deposits; sandstone bedrock; carbonate bedrock; and other bedrock lithologies including shale, siltstone, conglomerate, and igneous intrusions. The steady-state screening model treats the ground-water-flow system as a single layer with transmissivity zones that reflect the distribution of lithologic groups, and with recharge zones that correspond to general areas of high or low evapotranspiration. The model includes representation of second- and higher-order streams and municipal and other high-capacity production wells. The analytic-element model code GFLOW was used to simulate the regional ground-water flow, the water-table surface across the St. Croix River Basin, and base-flow contributions from ground water to streams. In addition, the model routes tributary base flow through the stream network to the St. Croix River. The parameter-estimation inverse model UCODE was linked to the GFLOW model to select the combination of parameter values best able to match over 5,000 water-level measurements and base-flow estimates at 22 streamflow-gaging stations. Results from the calibrated screening model show ground-water contributing areas for selected stream reaches within the basin. The delineation of these areas is useful to water-resource managers concerned with protection of fisheries and other resources. The model results also identify the areas of the basin where ground-water travel time from the water table to streams and wells is relatively short (less than 50 years). Ninety percent of the simulated ground-water pathlines require travel times between 3 and 260 years. The median pathline distance traversed and the median pathline velocity were 1.7 mi and 177 ft/y, respectively. It is important to recognize the limitations of this screening model. Heterogeneities in subsurface properties and in recharge rates are considered only at a very broad scale (miles to tens of miles). No account is taken of vertical variations in properties or pumping rates, and no provision is made to account for stacked ground-water-flow systems that have different flow patterns at different depths. Small-scale (hundreds to thousands of feet) flow systems associated with minor water bodies are neglected, and as a result, the model is not useful for simulating typical site-specific problems. Despite its limitations, the model serves as a framework for understanding the regional pattern of ground-water flow and as a starting point for a generation of more targeted and detailed ground-water models that would be needed to address emerging water-supply and water-quality concerns in the St. Croix River Basin.

Scientific Investigations Report↗
USGS2016

Estimating spatially and temporally varying recharge and runoff from precipitation and urban irrigation in the Los Angeles Basin, California

A daily precipitation-runoff model, referred to as the Los Angeles Basin watershed model (LABWM), was used to estimate recharge and runoff for a 5,047 square kilometer study area that included the greater Los Angeles area and all surface-water drainages potentially contributing recharge to a 1,450 square kilometer groundwater-study area underlying the greater Los Angeles area, referred to as the Los Angeles groundwater-study area. The recharge estimates for the Los Angeles groundwater-study area included spatially distributed recharge in response to the infiltration of precipitation, runoff, and urban irrigation, as well as mountain-front recharge from surface-water drainages bordering the groundwater-study area. The recharge and runoff estimates incorporated a new method for estimating urban irrigation, consisting of residential and commercial landscape watering, based on land use and the percentage of pervious land area. The LABWM used a 201.17-meter gridded discretization of the study area to represent spatially distributed climate and watershed characteristics affecting the surface and shallow sub-surface hydrology for the Los Angeles groundwater study area. Climate data from a local network of 201 monitoring sites and published maps of 30-year-average monthly precipitation and maximum and minimum air temperature were used to develop the climate inputs for the LABWM. Published maps of land use, land cover, soils, vegetation, and surficial geology were used to represent the physical characteristics of the LABWM area. The LABWM was calibrated to available streamflow records at six streamflow-gaging stations. Model results for a 100-year target-simulation period, from water years 1915 through 2014, were used to quantify and evaluate the spatial and temporal variability of water-budget components, including evapotranspiration (ET), recharge, and runoff. The largest outflow of water from the LABWM was ET; the 100-year average ET rate of 362 millimeters per year (mm/yr) accounted for 66 percent of the combined water inflow of 551 mm/yr, including 488 mm/yr from precipitation and 63 mm/yr from urban irrigation. The simulated ET rate varied from a minimum of 0 mm/yr for impervious areas to high values of more than 1,000 mm/yr for many areas, including the south-facing slopes of the San Gabriel Mountains, stream channels underlain by permeable soils and thick root zones, and pervious locations receiving inflows both from urban irrigation and surface water. Runoff was the next largest outflow, averaging 145 mm/yr for the 100-year period, or 26 percent of the combined precipitation and urban-irrigation inflow. Recharge averaged 45 mm/yr, or about 8 percent of the combined inflow from precipitation and urban irrigation. Simulation results indicated that recharge in response to urban irrigation was an important component of spatially distributed recharge, contributing an average of 56 percent of the total recharge to the eight LABWM subdomains containing the Los Angeles groundwater study area. The 100‑year average recharge rate for the eight subdomains was 41 mm/yr, or 8,473 hectare-meters per year (ha-m/yr), with urban irrigation included in the simulation compared to a recharge rate of 18 mm/yr, or 3,741 ha-m/yr, with urban irrigation excluded. In contrast to recharge, the effect of urban irrigation on runoff was slight; runoff was 72,667 ha-m/yr with urban irrigation included compared to 72,618 ha-m/yr with urban irrigation excluded, an increase of only 48 ha-m/yr (about 0.1 percent). Simulation results also indicated that potential recharge from hilly drainages outside of, but bordering and tributary to, the lower-lying area of the Los Angeles groundwater study area, in this study referred to as mountain-front recharge, could provide an important contribution to the total recharge for the groundwater basins. The time-averaged recharge rate was similar to the combined direct and mountain-front recharge components estimated in a previous study and used as input for a calibrated groundwater model. The annual (water year) recharge estimates simulated in this study, however, indicated much greater year-to-year variability, which was dependent on year-to-year variability in the magnitude and distribution of daily precipitation, compared to the previous estimates.

California↗
USGS2017

Bathymetric and velocimetric surveys at highway bridges crossing the Missouri and Mississippi Rivers near St. Louis, Missouri, May 23–27, 2016

Bathymetric and velocimetric data were collected by the U.S. Geological Survey, in cooperation with the Missouri Department of Transportation, near 13 bridges at 8 highway crossings of the Missouri and Mississippi Rivers in the greater St. Louis, Missouri, area from May 23 to 27, 2016. A multibeam echosounder mapping system was used to obtain channel-bed elevations for river reaches ranging from 1,640 to 1,970 feet longitudinally and extending laterally across the active channel from bank to bank during low to moderate flood flow conditions. These bathymetric surveys indicate the channel conditions at the time of the surveys and provide characteristics of scour holes that may be useful in the development of predictive guidelines or equations for scour holes. These data also may be useful to the Missouri Department of Transportation as a low to moderate flood flow comparison to help assess the bridges for stability and integrity issues with respect to bridge scour during floods. Bathymetric data were collected around every pier that was in water, except those at the edge of water, and scour holes were observed at most surveyed piers. The observed scour holes at the surveyed bridges were examined with respect to shape and depth. The frontal slope values determined for scour holes observed in the current (2016) study generally are similar to recommended values in the literature and to values determined for scour holes in previous bathymetric surveys. Several of the structures had piers that were skewed to primary approach flow, as indicated by the scour hole being longer on the side of the pier with impinging flow, and some amount of deposition on the leeward side, as typically has been observed at piers skewed to approach flow; however, at most skewed piers in the current (2016) study, the scour hole was deeper on the leeward side of the pier. At most of these piers, the angled approach flow was the result of a deflection or contraction of flow caused by a spur dike near the pier, which may affect flow differently than for a simple skew. At structure A6500 (site 33), the wide face of the pier footing and seal course would behave as a complex foundation, for which scour is computed differently. Previous bathymetric surveys exist for all the sites examined in this study. A previous survey in October 2010 at most of the sites had similar flow conditions and similar results to the 2016 surveys. A survey during flood conditions in August 2011 at the sites on the Missouri River and in May 2009 at structures A4936 and A1850 (site 35) on the Mississippi River did not always indicate more substantial scour during flood conditions. At structure A6500 (site 33) on the Mississippi River, a previous survey in 2009 was part of a habitat assessment before construction of the bridge and provides unique insight into the effects of the construction of that bridge on the channel in this reach. Substantial scour was observed near the right pier, and the riprap blanket surrounding the left pier seems to limit scour near that pier. Multiple additional surveys have been completed at structures A4936 and A1850 (site 35) on the Mississippi River, and the results of these surveys also are presented.

Missouri↗
USGS2004

Hydrogeologic characterization of the Modesto Area, San Joaquin Valley, California

Hydrogeologic characterization was done to develop an understanding of the hydrogeologic setting near Modesto by maximizing the use of existing data and building on previous work in the region. A substantial amount of new lithologic and hydrologic data are available that allow a more complete and updated characterization of the aquifer system. In this report, geologic units are described, a database of well characteristics and lithology is developed and used to update the regional stratigraphy, a water budget is estimated for water year 2000, a three-dimensional spatial correlation map of aquifer texture is created, and recommendations for future data collection are summarized. The general physiography of the study area is reflected in the soils. The oldest soils, which have low permeability, exist in terrace deposits, in the interfan areas between the Stanislaus, Tuolumne, and Merced Rivers, at the distal end of the fans, and along the San Joaquin River floodplain. The youngest soils have high permeability and generally have been forming on the recently deposited alluvium along the major stream channels. Geologic materials exposed or penetrated by wells in the Modesto area range from pre-Cretaceous rocks to recent alluvium; however, water-bearing materials are mostly Late Tertiary and Quaternary in age. A database containing information from more than 3,500 drillers'logs was constructed to organize information on well characteristics and subsurface lithology in the study area. The database was used in conjunction with a limited number of geophysical logs and county soil maps to define the stratigraphic framework of the study area. Sequences of red paleosols were identified in the database and used as stratigraphic boundaries. Associated with these paleosols are very coarse grained incised valley-fill deposits. Some geophysical well logs and other sparse well information suggest the presence of one of these incised valley-fill deposits along and adjacent to the Tuolumne River east of Modesto, a feature that may have important implications for ground-water flow and transport in the region. Although extensive work has been done by earlier investigators to define the structure of the Modesto area aquifer system, this report has resulted in some modification to the lateral extent of the Corcoran Clay and the regional dip of the Mehrten Formation. Well logs in the database indicating the presence of the Corcoran Clay were used to revise the eastern extent of the Corcoran Clay, which lies approximately parallel to the axis of valley. The Mehrten Formation is distinguished in the well-log database by its characteristic black sands consisting of predominantly andesitic fragments. Black sands in wells listed in the database indicate that the formation may lie as shallow as 120 meters (400 feet) below land surface under Modesto, approximately 90 meters (300 feet) shallower than previously thought. The alluvial aquifer system in the Modesto area comprises an unconfined to semiconfined aquifer above and east of the Corcoran Clay confining unit and a confined aquifer beneath the Corcoran Clay. The unconfined aquifer is composed of alluvial sediments of the Modesto, Riverbank, and upper Turlock Lake formations. The unconfined aquifer east of the Corcoran Clay becomes semiconfined with depth due to the numerous discontinuous clay lenses and extensive paleosols throughout the aquifer thickness. The confined aquifer is composed primarily of alluvial sediments of the Turlock Lake and upper Mehrten Formations, extending from beneath the Corcoran Clay to the base of fresh water. Ground water in the unconfined to semiconfined aquifer flows to the west and southwest. The primary source of present-day recharge is percolating excess irrigation water. The primary ground-water discharge is extensive ground-water pumping in the unconfined to semiconfined aquifer, imposing a significant component of vertical flow in the system. A water budget was calculated for water year 2000 using a land-use approach. During water year 2000, the total water supply in the Modesto area was more than 2.5 billion m3 (cubic meter) (2 million acre-ft [acre-foot]). Surface-water deliveries accounted for 60 percent of the total water supply, whereas ground-water pumpage accounted for 40 percent. Ninety-four percent of the water supply was used to meet irrigation demand and approximately 6 percent was used to meet urban demand. The total recharge in the model area was estimated at 1.4 billion m3 (1,100,000 acre-ft). The largest component of recharge is from excess irrigation water (58 percent); precipitation in excess of crop requirements accounted for 41 percent of the recharge. Geostatistical methods were used to develop a spatial correlation model of the percentage of coarse-grained texture in the Modesto area. The mean percentage coarse-grained texture calculated for each depth increment indicates a regional trend of decreasing coarse-grained texture with increasing depth, which is consistent with increasingly consolidated sediments with depth in the study area. The three-dimensional kriged estimates of percentage coarse-grained texture show significant heterogeneity in the texture of the sedimentary deposits. Assuming the hydraulic conductivity is correlated to the texture, the kriged result implies significant heterogeneity in the hydrogeologic framework.

California↗
USGS2018

Geohydrology, geochemistry, and numerical simulation of groundwater flow and land subsidence in the Bicycle Basin, Fort Irwin National Training Center, California

Groundwater pumping from Bicycle Groundwater Basin (referred to as Bicycle Basin) in the Fort Irwin National Training Center, California, began in 1967. From 1967 to December 2010, about 46,000 acre-feet of water had been pumped from the basin and transported to the Irwin Basin. During this time, not only did water levels in the basin decline by as much as 100 feet, the quality of the groundwater pumped from the basin also deteriorated in some wells. The U.S. Geological Survey collected geohydrologic data from existing wells, test holes, and 16 additional monitoring wells installed at 6 sites in Bicycle Basin during 1992–2011 to determine the quantity and quality of groundwater available in the basin. Geophysical surveys, including electrical, gravity, and seismic refraction surveys, were completed to help determine the geometry of the structural basin, delineate depths to the interface between Quaternary and Tertiary rocks, map the depth to the water table, and used to develop a geohydrologic framework and groundwater-flow model for Bicycle Basin. Water samples were used to determine the groundwater quality in the basin and to delineate potential sources of poor-quality groundwater. Analysis of stable isotopes of oxygen and hydrogen in groundwater indicated that presentday precipitation is not a major source of recharge to the basin. Tritium and carbon-14 data indicated that most of the groundwater in the basin was recharged prior to 1952 and had an apparent age of 15,625–39,350 years. Natural recharge to the basin was not sufficient to replenish the groundwater pumped from the basin. Interferograms from synthetic aperture radar data (InSAR), analyzed to evaluate land-surface subsidence between 1993 and 2010, showed 0.23 to 1.1 feet of subsidence during this period near one production well north of Bicycle Lake (dry) playa. A groundwater-flow model of Bicycle Basin was developed and calibrated using groundwater levels for 1964– 2010, and a subsidence model using land-surface deformation data for 1993–2010. Between January 1967 and December 2010, the simulated total recharge from precipitation runoff and underflow from adjacent basins was about 5,100 acre-feet and pumpage from the Bicycle Basin was about 47,000 acrefeet of water. Total outflows exceeded natural recharge during this period, resulting in a net loss of about 42,100 acre-feet of groundwater storage in the basin. The Fort Irwin National Training Center is considering various groundwater-management options in the Bicycle Basin. The groundwater-flow model was used to (1) evaluate changes in groundwater levels and subsidence with the addition of capture and recharge of simulated runoff in retention basins (scenario 1) for predevelopment through 2010; (2) simulate a base case (scenario 2) for reference; and (3) compare projections of alternative future pumping strategies for 2011–60 (scenarios 3–5). Model results from the runoff-capture simulation (scenario 1) indicated that total recharge, including runoff captured using retention basins, locally increased water levels, which partially offset, but did not mitigate, groundwater depletion associated with pumping. Groundwater-storage depletion in scenario 1 was about 14 percent less than without runoff capture. Simulated-drawdown results in model layer 1 in the eastern part of the basin indicated that, because of the captured runoff, simulated heads were as much as 100 feet higher in December 2010 than prior to the onset of development in 1967. In contrast, simulated drawdown for model without runoff capture indicated that, without captured runoff, simulated heads for December 2010 in this area were 80–90 feet lower than during the predevelopment period. Subsidence was mitigated slightly in scenario 1 compared to without runoff capture; the largest decrease in subsidence at observation sites was about 0.07 feet.

California↗
USGS2013

Transport of nitrogen in a treated-wastewater plume to coastal discharge areas, Ashumet Valley, Cape Cod, Massachusetts

Land disposal of treated wastewater from a treatment plant on the Massachusetts Military Reservation in operation from 1936 to 1995 has created a plume of contaminated groundwater that is migrating toward coastal discharge areas in the town of Falmouth, Massachusetts. To develop a better understanding of the potential impact of the treated-wastewater plume on coastal discharge areas, the U.S. Geological Survey, in cooperation with the Air Force Center for Engineering and the Environment, evaluated the fate of nitrogen (N) in the plume. Groundwater samples from two large sampling events in 1994 and 2007 were used to map the size and location of the plume, calculate the masses of nitrate-N and ammonium-N, evaluate changes in mass since cessation of disposal in 1995, and create a gridded dataset suitable for use in nitrogen-transport simulations. In 2007, the treated-wastewater plume was about 1,200 meters (m) wide, 30 m thick, and 7,700 m long and contained approximately 87,000 kilograms (kg) nitrate-N and 31,600 kg total ammonium-N. An analysis of previous studies and data from 1994 and 2007 sampling events suggests that most of biologically reactive nitrogen in the plume in 2007 will be transported to coastal discharge areas as either nitrate or ammonium with relatively little transformation to an environmentally nonreactive end product such as nitrogen gas. Nitrogen-transport simulations were conducted with a previously calibrated regional three-dimensional MODFLOW groundwater flow model. Mass-loaded particle tracking was used to simulate the advective transport of nitrogen to discharge areas (or receptors) along the coast. In the simulations, nonreactive transport (no mass loss in the aquifer) was assumed, providing an upper-end estimate of nitrogen loads to receptors. Simulations indicate that approximately 95 percent of the nitrate-N and 99 percent of the ammonium-N in the wastewater plume will eventually discharge to the Coonamessett River, Backus River, Green Pond, and Bournes River. Approximately 76 percent of the total nitrate-N mass in the plume will discharge to these receptors within 100 years of 2007; 90 and 94 percent will discharge within 200 and 500 years, respectively. Nitrate loads will peak within about 50 years at all of the major receptors. The highest peak loads will occur at the Coonamessett River (450 kg per year (kg/yr) nitrate-N) and the Backus River (350 kg/yr nitrate-N). Because of adsorption, travel times are longer for ammonium than for nitrate; approximately 5 percent of the total ammonium-N mass in the plume will discharge to receptors within 100 years; 46 and 81 percent will discharge within 200 and 500 years, respectively. The simulations indicate that the Coonamessett River will receive the largest cumulative nitrogen mass and the highest rate of discharge (load). Ongoing discharge to Ashumet Pond is relatively minor because most of the wastewater plume mass has already migrated downgradient from the pond. To evaluate the contribution of the nitrogen loads from the treated-wastewater plume to total nitrogen loads to the discharge areas, the simulated treated-wastewater plume loads were compared to steady-state nonpoint-source loads calculated by the Massachusetts Estuaries Project for 2005. Simulation results indicate that the total nitrogen loads from the treated-wastewater plume are much lower than corresponding steady-state nonpoint-source loads from the watersheds; peak plume loads are equal to 11 percent or less of the nonpoint-source loads.

Massachusetts↗
USGS2021

Hydrogeologic framework, geochemistry, groundwater-flow system, and aquifer hydraulic properties used in the development of a conceptual model of the Ogallala, Edwards-Trinity (High Plains), and Dockum aquifers in and near Gaines, Terry, and Yoakum Counties, Texas

In 2014, the U.S. Geological Survey, in cooperation with Llano Estacado Underground Water Conservation District, Sandy Land Underground Water Conservation District, and South Plains Underground Water Conservation District (hereinafter referred to collectively as the “UWCDs”), began a multiphase study in and near Gaines, Terry, and Yoakum Counties, Texas, to develop a regional conceptual model of the hydrogeologic framework, geochemistry, groundwater-flow system, and hydraulic properties, primarily for the High Plains and Edwards-Trinity aquifer system and to a lesser degree for the Dockum aquifer. The High Plains aquifer system (hereinafter referred to as the “Ogallala aquifer”), contained within the Ogallala Formation in Texas, is the shallowest aquifer in the study area and is the primary source of water for agriculture and municipal supply in the areas managed by the UWCDs. Groundwater withdrawals from deeper aquifers (primarily the Edwards-Trinity [High Plains] aquifer system that is hereinafter referred to as the “Edwards-Trinity [High Plains] aquifer”) augmented by lesser amounts from the Dockum aquifer provide additional water sources in the study area. The Edwards-Trinity (High Plains) aquifer is contained within the Trinity and Fredericksburg Groups. The Dockum aquifer, a relatively minor source of water in the study area, is contained in the Dockum Group, which was evaluated as a single unit. The potential for continual declines of the groundwater in the Ogallala aquifer in the study area and the potential changes in water quality resulting from dewatering and increased vertical groundwater movement between adjacent water-bearing units have raised concerns about the amount and quality of available groundwater. The developed conceptual model helped in the understanding of the quantity and quality of the groundwater within the Ogallala, the Edwards-Trinity (High Plains), and to a lesser extent, the Dockum aquifers within the study area. The hydrogeologic framework was used to assess the vertical and lateral extents of hydrogeologic units, bed orientations, unit thicknesses, and location and orientation of paleochannels. In general, the Trinity and Fredericksburg Groups and Ogallala Formation exhibit a slight regional dip (dip angle of about 0.14 degrees) to the southeast with dip directions becoming more to the south with each successively overlying unit (105, 110, and 125 degrees for the bases of the Trinity and Fredericksburg Groups and Ogallala Formation, respectively). In general, the Trinity and Fredericksburg Groups thin to the south and are not present in the southern part of Gaines County, whereas the Ogallala Formation becomes thinner from west to east. The combined thickness of the Trinity and Fredericksburg Groups and Ogallala Formation is generally greatest in the north-central part of the study area and thinnest in the southeastern part of the study area. Paleochannel orientation varied over geologic time as formations were deposited and eroded. Water-quality samples were collected from 51 wells throughout the study area to better understand general water quality and to provide insight into groundwater-flow paths and recharge areas. Groundwater samples were spatially grouped on the basis of similarities found in the physicochemical properties, major ions, trace elements, nutrients, organic compounds, and selected stable isotopes and age tracers. Three groundwater groups were identified in the study area. The first groundwater group (Group 1), represented mostly by groundwater from the Ogallala and Edwards-Trinity (High Plains) aquifers in the northern half of the study area, is considered to be recent recharge, affected by land-use activities, as explained by the younger age, higher concentrations of nitrate plus nitrite, and more frequent detections of organic compounds. Groundwater wells in the second groundwater group (Group 2) are typically in the southwestern and northwestern parts of the study area, and the groundwater in this group is considered to be groundwater recharged during the Pleistocene period, as explained by the relatively old age of the groundwater, high strontium stable isotope ratios, and hydrogen and oxygen stable isotope ratios. The last groundwater group (Group 3) is likely a mixture of groundwater from the first or second groups (or both) with a third, highly mineralized groundwater as explained by having the highest dissolved-solids concentrations in the study area and having some similarities to geochemical characteristics of samples from the first and second groups. A groundwater-flow system analysis was done to understand the flow of groundwater throughout the aquifer system. Groundwater-level altitudes for the Ogallala, Edwards-Trinity (High Plains), and Dockum aquifers are generally higher in the northwestern part of the study area and lower in the southeastern part of the study area. Groundwater generally flows in a northwest to southeast direction across the study area in each of the aquifers. The groundwater-flow paths closely resemble the mapped paleochannels, indicating that within the study area, the groundwater flows preferentially along the paleochannels, especially within the Ogallala aquifer where dewatering of the aquifer results in a greater effect of the base structure on the flow of groundwater. The Ogallala aquifer is unsaturated in localized areas in the study area; unsaturated areas are generally near the southern extent of the Edwards-Trinity (High Plains) aquifer, with the largest unsaturated area west of Seminole, Tex. The saturated thickness of the Ogallala aquifer is thickest (more than 125 feet) southeast of Seminole and west of Brownfield, Tex., near the border between Terry and Yoakum Counties. The saturated thickness of the combined Ogallala and Edwards-Trinity (High Plains) aquifers ranges from less than 10 feet along the far southern edge of the study area to more than 350 feet north and east of Brownfield, Tex., and along the border between Terry and Yoakum Counties. The aquifer hydraulic properties, including hydraulic conductivity and specific yield, were estimated to better understand the ability of groundwater to move through the aquifer system and quantify the volume of available water in storage. The hydraulic-conductivity values varied greatly within the study area (ranging from about 0.03 to about 350 feet per day), and often large variations were found in the same area. Terry County contained the highest and lowest hydraulic conductivity values for the Ogallala aquifer, whereas Yoakum County contained the highest and lowest hydraulic conductivity values for the Edwards-Trinity (High Plains) aquifer. The highest hydraulic-conductivity values for the Dockum aquifer were in Gaines County, whereas the lowest hydraulic-conductivity values were in Terry County. The estimated specific yield values within the study area range from 0.01 to 0.36. Higher specific yield values generally occurred in the western part of the study area except in the Ogallala aquifer where higher specific yield values were in the east. The Ogallala aquifer had the lowest specific yield range and the least specific yield variability among the three aquifers, whereas the Dockum aquifer had the highest specific yield range and the greatest specific yield variability. Using the estimated saturated thickness and estimated specific yield grids, the water volumes of the Ogallala and Edwards-Trinity (High Plains) aquifers and the combined Ogallala and Edwards-Trinity (High Plains) aquifers were estimated. The available water in the Edwards-Trinity (High Plains) aquifer (16.6 million acre-feet) is almost double the available water in the Ogallala aquifer (8.8 million acre-feet). Although the Edwards-Trinity (High Plains) aquifer contains more available groundwater, pumping is more difficult because of the relatively low hydraulic conductivity and specific yield values compared to the Ogallala aquifer. Overall, the available water within the combined Ogallala and Edwards-Trinity (High Plains) aquifers is about 6.6, 10.2, and 8.6 million acre-feet for Gaines, Terry, and Yoakum Counties, respectively.

Texas↗
USGS2009

Water-level conditions in selected confined aquifers of the New Jersey and Delaware coastal plain, 2003

The Coastal Plain aquifers of New Jersey provide an important source of water for more than 2 million people. Steadily increasing withdrawals from the late 1800s to the early 1990s resulted in declining water levels and the formation of regional cones of depression. In addition to decreasing water supplies, declining water levels in the confined aquifers have led to reversals in natural hydraulic gradients that have, in some areas, induced the flow of saline water from surface-water bodies and adjacent aquifers to freshwater aquifers. In 1978, the U.S. Geological Survey began mapping the potentiometric surfaces of the major confined aquifers of New Jersey every 5 years in order to provide a regional assessment of ground-water conditions in multiple Coastal Plain aquifers concurrently. In 1988, mapping of selected potentiometric surfaces was extended into Delaware. During the fall of 2003, water levels measured in 967 wells in New Jersey, Pennsylvania, northeastern Delaware, and northwestern Maryland were used estimate the potentiometric surface of the principal confined aquifers in the Coastal Plain of New Jersey and five equivalent aquifers in Delaware. Potentiometric-surface maps and hydrogeologic sections were prepared for the confined Cohansey aquifer of Cape May County, the Rio Grande water-bearing zone, the Atlantic City 800-foot sand, the Vincentown aquifer, and the Englishtown aquifer system in New Jersey, as well as for the Piney Point aquifer, the Wenonah-Mount Laurel aquifer, and the Upper Potomac-Raritan-Magothy, the Middle and undifferentiated Potomac-Raritan-Magothy, and the Lower Potomac-Raritan-Magothy aquifers in New Jersey and their equivalents in Delaware. From 1998 to 2003, water levels in many Coastal Plain aquifers in New Jersey remained stable or had recovered, but in some areas, water levels continued to decline as a result of pumping. In the Cohansey aquifer in Cape May County, water levels near the center of the cone of depression underlying the southern part of the peninsula remained about the same as in 1998. To the south, recoveries up to 8 feet were observed in southern Lower Township as withdrawals had decreased since 1998. In the northern part of Cape May County, water levels had not changed substantially from historic conditions. In the Rio Grande water-bearing zone, water levels rose by as much as 13 ft at the Rio Grande well field; elsewhere across the aquifer, little change had occurred. In the Atlantic City 800-foot sand, water-level changes were greatest in southern Cape May County; at the Cape May desalination wells, water levels were as much as 32 ft lower in 2003 than in 1998. In contrast, water levels at the center of a regional cone of depression near Atlantic City rose by as much as 10 ft. Within the Piney Point aquifer water levels rose by 46 ft near Seaside Park. Similarly, water levels increased by more than 30 ft in and around the major cone of depression underlying Dover, Delaware. In the Vincentown aquifer, water levels stabilized or recovered by 2 ft to 6 ft from 1998 to 2003 in most of the wells measured; the exception is near Adelphia in Monmouth County, where water levels rose by as much as 18 ft. From 1998 to 2003, water levels near the center of a large cone of depression that extends from Monmouth to Ocean County recovered by as much as 20 ft in the Wenonah-Mount Laurel aquifer. Concurrently, ground-water levels within the Englishtown aquifer system declined by as much as 13 ft in the same area. Water levels across much of the Upper Potomac-Raritan-Magothy aquifer in the northern Coastal Plain remained about the same as 5 years previous, except in northern Ocean County where ground-water levels declined 10 ft to 33 ft. Water levels in the Middle Potomac-Raritan-Magothy aquifer declined from 5 to 9 ft along the border between Monmouth and Middlesex County. Elsewhere, across the northern part of the Coastal Plain, water levels stabilized within the Cretaceous-a

Delaware, New Jersey↗
USGS2019

Quantifying the eroded and deposited mass of mercury-contaminated sediment by using terrestrial laser scanning at the confluence of Humbug Creek and the South Yuba River, Nevada County, California, 2011–13

High-resolution, terrestrial laser scanning, also known as ground-based lidar (light detection and ranging), was used to quantify the volume of mercury-contaminated sediment eroded from an outcrop of historical placer-mining debris at the confluence of Humbug Creek and the South Yuba River in the Sierra Nevada foothills, about 17 kilometers northeast of Grass Valley, California, and delivered to a zone below an observed flood stage of the South Yuba River. Substantial quantities of mercury were used and lost to the environment from historical placer gold mining activities on the western slope of the Sierra Nevada, California, and recent studies have documented continued persistence of mercury and methylmercury concentrations in water, sediment, fish, and predatory invertebrates in the Yuba River drainage basin in relation to suspected mercury sources. To identify areas that have high levels of mercury contamination as possible remediation targets in the Yuba River drainage basin and other areas in the Sierra Nevada, the U.S. Geological Survey worked in cooperation with the Bureau of Land Management on this and other detailed studies. Malakoff Diggings, one of the largest hydraulic gold mines in the Sierra Nevada, is 3.5 kilometers north of the study site in the Humbug Creek subbasin. Terrestrial laser scanning was used to produce centimeter-scale, three-dimensional maps of the complex outcrop surface, which was composed of an upper erosional area (cliff and over-steepened slope) and a lower depositional area (colluvial slope). The outcrop could not be mapped non-destructively or in sufficient detail by traditional surveying techniques. The study site, which was approximately 70 meters long, 30 meters wide and 20 meters high, was surveyed four times in 2 years (December 15, 2011; October 25, 2012; January 4, 2013; and November 22, 2013) to determine volumetric differences in the upper erosional and lower depositional areas between surveys. Measured changes in volume for the upper erosional area and lower depositional area were multiplied by the corresponding sediment density so that a mass-balance relationship, between the eroded and deposited sediment during each period, could be used to estimate the amount of mercury-contaminated sediment that was transported to below the base of the colluvial slope, where it could be mobilized by the South Yuba River during a flood having a 5-to-10-year recurrence interval. On December 2, 2012, a flood of this estimated magnitude reached the base of the colluvial slope. Between the first and second surveys (December 15, 2011–October 25, 2012), an estimated mass of 18±9.2 kilograms of sediment was transported from steeper slopes to the gently sloping river bank below the base of the colluvial slope. Between the second and third surveys (October 25, 2012–January 4, 2013), an atmospheric river caused heavy precipitation at the study site during late November and early December 2012. This short-duration, high-intensity rain resulted in a large amount of erosion and deposition at the study site and also caused high streamflow (flood stage) in the South Yuba River. From October 2012 to January 2013, 51±31 kilograms of sediment was transported to below the base of the colluvial slope, that is, below the high-water mark of December 2, 2012. Between the third and fourth surveys (January 4, 2013–November 22, 2013), an additional 10±26 kilograms of sediment was transported to below the base of the colluvial slope. During the 24 months of the study, the total mass of sediment delivered below the base of the colluvial slope and the high-water mark of December 2, 2012, was 79±66 kilograms. In any given year there is a 10–20-percent chance (5-to-10-year recurrence interval) of a flood equal to or greater than that of the December 2, 2012, flood, which could transport mercury-contaminated sediment at the study site into the South Yuba River. Hydraulically modeled estimates of the South Yuba River stage during floods having a 50- and 100-year recurrence interval (2- and 1-percent annual exceedance probability, respectively) indicated that resulting river stages could be 2.2–3.0 meters above the base of the colluvial slope, or 2.2–3.0 meters above the high-water mark of December 2, 2012. Such high river stages would be likely to inundate the lower half of the colluvial slope and mobilize a substantial volume of mercury-contaminated sediment to downstream areas.

California↗
USGS2020

Bathymetric and velocimetric surveys at highway bridges crossing the Missouri River between Kansas City and St. Louis, Missouri, May 22–31, 2017

Bathymetric and velocimetric data were collected by the U.S. Geological Survey, in cooperation with the Missouri Department of Transportation, near 10 bridges at 9 highway crossings of the Missouri River between Kansas City and St. Louis, Missouri, from May 22 to 31, 2017. A multibeam echosounder mapping system was used to obtain channel-bed elevations for river reaches ranging from 1,550 to 1,840 feet longitudinally and generally extending laterally across the active channel from bank to bank during moderate flood flow conditions. These surveys indicate the channel conditions at the time of the surveys and provide characteristics of scour holes that may be useful in the development of predictive guidelines or equations for scour holes. These data also may be useful to the Missouri Department of Transportation as a low to moderate flood flow comparison to help assess the bridges for stability and integrity issues with respect to bridge scour during floods. Bathymetric data were collected around every pier that was in water, except those at the edge of water, and scour holes were observed at most surveyed piers. Occasionally, the scour hole near a pier was difficult to discern from nearby bed features. The observed scour holes at the surveyed bridges were generally examined with respect to shape and depth. Although exposure of parts of substructural support elements was observed at several piers, at most sites the exposure likely can be considered minimal compared to the overall substructure that remains buried in bed material at these piers. The notable exceptions are piers 4 and 5 at structure K0999 on Missouri State Highway 41 at Miami, Mo.; piers 2 and 3 at structure G0069 on Missouri State Highway 240 at Glasgow, Mo.; and pier 5 at structure A4574 on Missouri State Highway 5 at Boonville, Mo. At these structures, the bed-material thickness between the bottom of the scour hole and bedrock was less than 6 feet. Pier size, nose shape, and alignment to flow had a profound effect on the size of the scour hole observed for a given pier. Narrow piers having round or sharp noses that were aligned with flow often had scour holes that were difficult to discern from nearby bed features, whereas piers having wide or blunt noses resulted in larger, deeper scour holes. Several structures had piers that were skewed to primary approach flow, and scour holes near these piers generally indicated deposition on the leeward side of the pier and greater depth on the side of the pier with impinging flow. A riprap blanket constructed in 2015 around pier 4 of structures L0550 and A4497 on U.S. Highway 54 at Jefferson City, Mo., effectively mitigates the scour observed near those piers in previous surveys. Previous bathymetric surveys exist for all the sites examined in this study. Bathymetric surfaces from a nonflood survey in 2013 and a flood survey in July 2011 at most of the sites are compared to the 2017 survey surfaces. The average channel-bed elevation at structure A4574 was remarkably similar in all three surveys and higher than what might be implied by a trendline along the reach between Kansas City and St. Louis, which may indicate this site is at or near a local feature that controls sediment deposition and scour.

Missouri↗
USGS2006

Application of a stream-aquifer model to Monument Creek for development of a method to estimate transit losses for reusable water, El Paso County, Colorado

The U.S. Geological Survey, in cooperation with Colorado Springs Utilities, the Colorado Water Conservation Board, and the El Paso County Water Authority, began a study in 2004 to (1) apply a stream-aquifer model to Monument Creek, (2) use the results of the modeling to develop a transit-loss accounting program for Monument Creek, (3) revise the existing transit-loss accounting program for Fountain Creek to incorporate new water-management strategies and allow for incorporation of future changes in water-management strategies, and (4) integrate the two accounting programs into a single program with a Web-based user interface. The purpose of this report is to present the results of applying a stream-aquifer model to the Monument Creek study reach. Transit losses were estimated for reusable-water flows in Monument Creek that ranged from 1 to 200 cubic feet per second (ft 3 /s) and for native streamflows that ranged from 0 to 1,000 ft 3 /s. Transit losses were estimated for bank-storage, channel-storage, and evaporative losses. The same stream-aquifer model used in the previously completed (1988) Fountain Creek study was used in the Monument Creek study. Sixteen model nodes were established for the Monument Creek study reach, defining 15 subreaches. Channel length, aquifer length, and aquifer width for the subreaches were estimated from available topographic and geologic maps. Thickness of alluvial deposits and saturated thickness were estimated using lithologic and water-level data from about 100 wells and test holes in or near the Monument Creek study reach. Estimated average transmissivities for the subreaches ranged from 2,000 to 12,000 feet squared per day, and a uniform value of 0.20 was used for storage coefficient. Qualitative comparison of recorded and simulated streamflow at the downstream node for the calibration and verification simulations indicated that the two streamflows compared reasonably well. No adjustments were made to the model parameters. Differences between recorded and simulated streamflow volumes for all calibration and verification simulations ranged from about –8.8 to 7.5 percent; the total error for all simulations was about –0.7 percent. The model was used to estimate bank-storage losses for 10 to 15 native streamflows for each reusable-water flow of 1, 3, 5, 7, 10, 15, 20, 30, 40, 50, 100, and 200 ft 3 /s. Then the 10 to 15 bank-storage loss values were used in least-squares linear regression to estimate a relation between bank-storage loss and native streamflow for each of the 12 reusable-water flow rates. The 12 regression relations then were used to develop “look-up” tables of bank-storage loss for reusable-water flows ranging from 1 to 200 ft 3 /s (in 1-ft 3 /s increments). Additional model simulations indicated that (1) when the ratio of downstream native streamflow to upstream native streamflow was less than 1, bank-storage loss generally increased and (2) when the ratio of downstream native streamflow to upstream native streamflow was larger than 1, bank-storage loss generally decreased. These results were used to develop a bank-storage loss adjustment factor based on the ratio of native streamflow at the downstream node to native streamflow at the upstream node. The model also was used to estimate a recovery period, which is the length of time needed for the bank-storage loss to return to the stream. The recovery period was 1 day for six subreaches; 2 days for four subreaches; between 3 and 12 days for four subreaches; and 28 days for one subreach. Channel-storage losses are about 10 percent of the reusable-water flow for most of the subreaches, except for two subreaches, where the channel-storage losses are about 20 percent, and one subreach, where the losses are about 30 percent, owing to the greater channel lengths. Evaporative losses were estimated by the use of monthly pan-evaporation data and the incremental increase in stream width resulting from any reusable-water flows. Monthly pan-evaporation data were converted to a daily rate. The daily rate, when multiplied by the stream-width increase (in feet) that results from reusable-water flow and by the subreach length (in miles) gives the daily evaporative loss in cubic feet per second.

Colorado↗
USGS2012

Geologic and mineralogic controls on acid and metal-rich rock drainage in an alpine watershed, Handcart Gulch, Colorado

The surface and subsurface geology, hydrothermal alteration, and mineralogy of the Handcart Gulch area was studied using map and drill core data as part of a multidisciplinary approach to understand the hydrology and affects of geology on acid-rock drainage in a mineralized alpine watershed. Handcart Gulch was the locus of intense hydrothermal alteration that affected an area of nearly 3 square kilometers. Hydrothermal alteration and accompanied weak mineralization are spatially and genetically associated with small dacite to low-silica rhyolite stocks and plugs emplaced about 37-36 Ma. Felsic lithologies are commonly altered to a quartz-sericite-pyrite mineral assemblage at the surface, but alteration is more variable in the subsurface, ranging from quartz-sericite-pyrite-dominant in upper core sections to a propylitic variant that is more typical in deeper drill core intervals. Late-stage, hydrothermal argillic alteration [kaolinite and(or) smectite] was superimposed over earlier-formed alteration assemblages in the felsic rocks. Smectite in this late stage assemblage is mostly neoformed resulting from dissolution of chlorite, plagioclase, and minor illite in more weakly altered rocks. Hydrothermally altered amphibolites are characterized by biotitic alteration of amphibole, and subsequent alteration of both primary and secondary biotite to chlorite. Whereas pyrite is present both as disseminations and in small veinlets in the felsic lithologies, it is mostly restricted to small veinlets in the amphibolites. Base-metal sulfides including molybdenite, chalcopyrite, sphalerite, and galena are present in minor to trace amounts in the altered rocks. However, geologic data in conjunction with water geochemical studies indicate that copper mineralization may be present in unknown abundance in two distinct areas. The altered rocks contain an average of 8 weight percent fine pyrite that is largely devoid of metals in the crystal structure, which can be a significant source of trace metals in other areas with acid rock drainage. Thus, elevated base-metal concentrations in the trunk stream and discrete springs in the study area, as determined in previous studies, are likely derived from discrete metal-rich sources, rather than the abundant pyrite veins or disseminations. Pyrite is oxidized in nearly all outcrops examined. Drill core data show that zones of pyrite oxidation range in depth from 100 meters below the surface at higher elevations to just a few meters depth at the lowest elevations in the study area. However, discrete pyrite oxidation zones are present in drill core to depths of several hundred meters below the pervasive near-surface oxidation zones. These deeper discrete oxidation zones, which are present where fresh pyrite predominates, are spatially associated with fractures, small faults, and breccias. Quartz-sericite-pyrite-altered rocks containing unoxidized pyrite likely have the highest acid-generating capacity of all alteration assemblages in the study area. Hydrothermal alteration has left these rocks base-cation leached and thus acid-neutralizing potential is negligible. In contrast, propylitic-altered felsic rocks commonly contain trace to minor calcite and abundant chlorite, which provide some amount of acid-neutralization despite the presence of a few percent pyrite.

Colorado↗
USGS2012

The potential effects of sodium bicarbonate, a major constituent from coalbed natural gas production, on aquatic life

The production water from coalbed natural gas (CBNG) extraction contains many constituents. The U.S. Environmental Protection Agency has established aquatic life criteria for some of these constituents, and it is therefore possible to evaluate their risk to aquatic life. However, of the major ions associated with produced waters, chloride is the only one with an established aquatic life criterion (U.S. Environmental Protection Agency, 1988). The focus of this research was NaHCO 3 , a compound that is a major constituent of coalbed natural gas produced waters in the Tongue and Powder River Basins. This project included laboratory experiments, field in situ experiments, a field mixing zone study, and a fishery presence/absence assessment. Though this investigation focuses on the Tongue and Powder River Basins, the information is applicable to other watersheds where sodium bicarbonate is a principle component of product water either from CBNG or from traditional or unconventional oil and gas development. These data can also be used to separate effects of saline discharges from those potentially posed by other constituents. Finally, this research effort and the additional collaboration with USGS Water Resources and Mapping, Bureau of Land Management, US Environmental Protection Agency, State of Montana, State of Wyoming, Montana State University, University of Wyoming, and others as part of a Powder River Aquatic Task Group, can be used as a model for successful approaches to studying landscapes with energy development. The laboratory acute toxicity experiments were completed with a suite of organisms, including 7 species of fish, 5 species of invertebrates, and 1 amphibian species. Experiments performed on these multiple species resulted in LC50s that ranged from 1,120 to greater than (>) 8,000 milligrams sodium bicarbonate per liter (mg NaHCO 3 /L) (also defined as 769 to >8,000 milligrams bicarbonate per liter (mg HCO 3 -/L) or total alkalinity expressed as 608 to >4,181 milligrams calcium carbonate per liter (mg CaCO 3 /L)) that varied across species and lifestage within a species. The age at which fish were exposed to NaHCO 3 significantly affected the severity of toxic responses for some organisms. The chronic toxicity of NaHCO 3 was defined in experiments that lasted from 7—60 days post-hatch. For these experiments, sublethal effects such as growth and reproduction, in addition to significant reductions in survival were included in the final determination of effects. Chronic toxicity was observed at concentrations that ranged from 450 to 800mg NaHCO 3 /L (also defined as 430 to 657 mg HCO 3 -/L or total alkalinity expressed as 354 to 539 mg CaCO 3 /L) and the specific concentration depended on the sensitivity of the four species of invertebrates and fish exposed. Sublethal investigations during chronic studies revealed percent decrease in the activity of sodium-potassium adenosine triphosphatase (Na/K ATPase, an enzyme involved in ionoregulation) and the age of the fish at the onset of the decrease may affect the ability of fathead minnow to survive exposures to NaHCO 3 . A database of toxicity evaluations of NaHCO 3 on aquatic life has been constructed. Using these data, sample acute and chronic criteria of 459 and 381 mg NaHCO 3 /L, respectively, can be calculated for the protection of aquatic life. The final derivation and implementation of such criteria is, of course, left to the discretion of the concerned management agencies. A combination of in situ experiments, static-renewal experiments performed simultaneously with in situ experiments, and static renewal experiments performed with site water in the laboratory, demonstrated that untreated coalbed natural gas (CBNG) product water from the Tongue and Powder River Basins reduces survival of fathead minnow and pallid sturgeon. More precisely, the survival of early-lifestage fathead minnow, especially those less than 6-days post hatch (dph), likely is reduced significantly in the field when concentrations of NaHCO 3 rise above 1,500 mg/L. However, age was not a factor for pallid sturgeon and they were sensitive to product water regardless of age. Treatment with the Higgins Loop™ technology and dilution of untreated water increased survival in the laboratory. Both of these situations reduced ammonia in addition to the concentrations of NaHCO 3 . These experiments addressed the acute toxicity of effluent waters being added to the main stem rivers, but did not address issues related to the volumes of water that may be added to the watershed. Mixing zones of the three outfalls studied ranged from approximately 800—1,200 m below the confluence and the areas within these mixing zones with acutely lethal concentrations of NaHCO 3 (as defined by the presence of concentrated dye) are limited. The areas with concentrations of NaHCO 3 more than the concentrations likely to cause significant mortality, and more than the calculated sample water-quality criteria in the Tongue and Powder River Basins appear to be limited to tributaries and parts of mixing zones with considerable additions of untreated effluent.

Montana;Wyoming↗
USGS2013

Porphyry copper assessment of Southeast Asia and Melanesia: Chapter D in Global mineral resource assessment

The U.S. Geological Survey collaborated with member countries of the Coordinating Committee for Geoscience Programmes in East and Southeast Asia (CCOP) on an assessment of the porphyry copper resources of Southeast Asia and Melanesia as part of a global mineral resource assessment. The region hosts world-class porphyry copper deposits and underexplored areas that are likely to contain undiscovered deposits. Examples of known porphyry copper deposits include Batu Hijau and Grasberg in Indonesia; Panguna, Frieda River, and Ok Tedi in Papua New Guinea; and Namosi in Fiji. This assessment covers the countries of Cambodia, Indonesia, Lao People&rsquo;s Democratic Republic, Malaysia, Myanmar, Papua New Guinea, Singapore, Thailand, and parts of southeastern China, India, the Solomon Islands, Vanuatu, and Fiji. Twenty-two geographic areas were delineated as tracts that are permissive for porphyry copper deposits in Southeast Asia. Permissive tracts are grouped into four broadly defined geographic/geologic areas, as follows: (1) the Indochina Peninsula area, (2) Indonesian and Malaysian Islands, (3) New Guinea Island and Papuan New Guinea islands, and (4) Melanesia. Individual tracts range from less than 1,000 to more than 350,000 square kilometers in area. Permissive tracts are based on mapped and inferred subsurface (<1 kilometer depth) distributions of igneous rocks of specific age ranges that define magmatic arcs and magmatic belts that are likely to contain porphyry copper deposits. Most of these magmatic arcs are subduction-related, although some have porphyry-style deposits occurring in postcollisional and (or) poorly understood tectonic settings. Although maps at a variety of different scales were used in the compilation, the final tract boundaries are intended for use at a scale of 1:1,000,000. Global grade and tonnage models for porphyry copper deposits were evaluated. Most of the known deposits are best described as fitting the copper-gold (Cu-Au) subtype of porphyry copper deposit. For some permissive tracts, a general porphyry copper-gold-molybdenum (Cu-Au-Mo) model was used. Assessment participants estimated numbers of undiscovered deposits at different levels of confidence for most of the permissive tracts. These estimates were combined with grade and tonnage models using a Monte Carlo simulation to estimate undiscovered resources. Additional resources in extensions of deposits with identified resources were not evaluated. Assessment results, presented in tables and graphs, show mean amounts of metal and mineralized rock in undiscovered deposits at different quantile levels, as well as the arithmetic mean for each tract. This assessment estimated a mean of 89 undiscovered porphyry copper deposits for the assessed permissive tracts in Southeast Asia and Melanesia. About 288 million metric tons (Mt) of copper and 18,000 metric tons (t) of gold, as well as byproduct molybdenum and silver, could be associated with undiscovered deposits. This represents about four times the number of deposits with identified resources (23) already discovered in Southeast Asia; reliable reported identified resources for those 23 deposits total 84 Mt of copper and 6,000 t of gold. Eleven permissive tracts have no known porphyry copper deposits with reported resources. Three of those 11 tracts lacked sufficient information for a probabilistic assessment and are discussed in qualitative terms. On a regional basis, both the Indochina Peninsula area and the Indonesian-Malaysian Islands area are estimated to contain about 10 times as much in place copper in undiscovered porphyry copper deposits as has been identified to date. For the New Guinea Island areas, the ratio of undiscovered to identified copper resources is about 2. Some parts of the region have a long history of porphyry exploration cycles and mine development, interrupted at times by political and social unrest, environmental concerns, and natural disasters. Changes in mining laws within the region and the recent high price of gold on the world market have prompted renewed interest in porphyry copper deposits in Southeast Asia and Melanesia. However, predicted undiscovered deposits may not be found, and if found, may not be developed. This assessment includes an overview of the assessment results with summary tables. Detailed descriptions of each tract are included in appendixes, with estimates of numbers of undiscovered deposits, and probabilistic estimates of amounts of copper, molybdenum, gold, and silver that could be contained in undiscovered deposits for each permissive tract. A geographic information system (GIS) that accompanies the report includes tract boundaries and a database of known porphyry copper deposits and significant prospects.

Scientific Investigations Report↗
USGS2010

Estimation of the effects of land use and groundwater withdrawals on streamflow for the Pomperaug River, Connecticut

A precipitation runoff model for the Pomperaug River watershed, Connecticut was developed to address issues of concern including the effect of development on streamflow and groundwater recharge, and the implications of water withdrawals on streamflow. The model was parameterized using a strategy that requires a minimum of calibration and optimization by establishing basic relations between the parameter value and physical characteristics of individual hydrologic response units (HRUs) that comprise the model. The strategy was devised so that the information needed can be obtained from Geographic Information System and other general databases for Connecticut. Simulation of groundwater recharge enabled evaluation of the temporal and spatial mapping of recharge variation across the watershed and the spatial effects of changes in land cover on base flow and surface runoff. The modeling indicated that over the course of a year, groundwater provides between 60 and 70 percent of flow in the Pomperaug River; the remainder is generated by more rapid flow through the shallow subsurface and runoff from impermeable surfaces and saturated ground. Groundwater is recharged primarily during periods of low evapotranspiration in the winter, spring, and fall. The largest amount of recharge occurs in the spring in response to snowmelt. During floods, the Weekeepeemee and Nonnewaug Rivers (tributaries that form the Pomperaug River) respond rapidly with little flood peak attenuation due to flood-plain storage. In the Pomperaug River, flood-plain storage is more important in attenuating floods; abandoned quarry ponds (O&G ponds) adjacent to the river provide substantial flood storage above specific river stages when flow from the river spills over the banks and fills the ponds. Discharge from the ponds also helps to sustain low flows in the Pomperaug River. Similarly, releases from the Bronson-Lockwood reservoir sustain flow in the Nonnewaug River and tend to offset the effect of groundwater withdrawals from a well field adjacent to the river during periods of natural low flow. The model indicated that under the current zoning, future development could reduce low flows by as much as 10 percent at the 99 percent exceedance level (99 percent of flows are greater than or equal to this flow), but would not substantially increase the highest flows. Simulation of projected and hypothetical development in the watershed shows, depending on how stormwater is managed, that between 10 and 20 percent effective impervious area in an HRU results in streamflow becoming dominated by the surface-runoff component. This shift from a groundwater-dominated system would likely result in substantial changes in water quality and instream habitat characteristics of the river. Base flow to streams in the Pomperaug River watershed is reduced by both increased impervious surface and increased groundwater withdrawals. For the watershed as a whole, increasing groundwater withdrawals have the potential for causing greater overall reductions in flow compared to increased development and impervious surfaces. Additionally, on the basis of groundwater-modeling simulations, the projected increase in development across the watershed and, to a lesser extent the increase in groundwater withdrawals, will increase the number of local losing reaches experiencing dry conditions and the duration of these dry periods. The location of the losing reaches tends to be in areas near the transition from the uplands to the valley bottoms that are filled with coarse glacial stratified deposits. The simulated increase in the duration and extent of localized dry stream reaches is most sensitive to local increase in impervious surface. Conversion of land from forest or developed land cover to pasture or agricultural land increases groundwater recharge and discharge to streams, while at the same time increasing overall streamflow (the opposite effect as increased impervious surface). These resu

Scientific Investigations Report↗
USGS2010

Bathymetric surveys at highway bridges crossing the Missouri River in Kansas City, Missouri, using a multibeam echo sounder, 2010

Bathymetric surveys were conducted by the U.S. Geological Survey, in cooperation with the Missouri Department of Transportation, on the Missouri River in the vicinity of nine bridges at seven highway crossings in Kansas City, Missouri, in March 2010. A multibeam echo sounder mapping system was used to obtain channel-bed elevations for river reaches that ranged from 1,640 to 1,800 feet long and extending from bank to bank in the main channel of the Missouri River. These bathymetric scans will be used by the Missouri Department of Transportation to assess the condition of the bridges for stability and integrity with respect to bridge scour. Bathymetric data were collected around every pier that was in water, except those at the edge of the water or in extremely shallow water, and one pier that was surrounded by a large debris raft. A scour hole was present at every pier for which bathymetric data could be obtained. The scour hole at a given pier varied in depth relative to the upstream channel bed, depending on the presence and proximity of other piers or structures upstream from the pier in question. The surveyed channel bed at the bottom of the scour hole was between 5 and 50 feet above bedrock. At bridges with drilled shaft foundations, generally there was exposure of the upstream end of the seal course and the seal course often was undermined to some extent. At one site, the minimum elevation of the scour hole at the main channel pier was about 10 feet below the bottom of the seal course, and the sides of the drilled shafts were evident in a point cloud visualization of the data at that pier. However, drilled shafts generally penetrated 20 feet into bedrock. Undermining of the seal course was evident as a sonic 'shadow' in the point cloud visualization of several of the piers. Large dune features were present in the channel at nearly all of the surveyed sites, as were numerous smaller dunes and many ripples. Several of the sites are on or near bends in the river, resulting in a deep channel thalweg on the outside of the bend at these sites. At structure A5817 on State Highway 269, bedrock exposure was evident in the channel thalweg. The surveyed channel bed at a given site from this study generally was lower than the channel bed obtained during Level II scour assessments in 2002. At piers with well-defined scour holes, the frontal slopes of the holes were somewhat less than recommended values in the literature, and the shape of the holes appeared to be affected by the movement of dune features into and around the holes. The channel bed at all of the surveyed sites was lower than the channel bed at the time of construction, and an analysis of measurement data from the U.S. Geological Survey continuous streamflow-gaging station on the Missouri River at Kansas City, Missouri (station number 06893000), confirmed a lowering trend of the channel-bed elevations with time at the gaging station. The size of the scour holes observed at the surveyed sites likely was affected by the moderate flood conditions on the Missouri River at the time of the surveys. The scour holes likely would be substantially smaller during conditions of low flow.

Scientific Investigations Report↗