Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Geophysical Research - Planets”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89Linked to original sources
USGS2012

Igneous history of the Koyukuk terrane, western Alaska: Constraints on the origin, evolution, and ultimate collision of an accreted island arc terrane

The Koyukuk terrane of western Alaska consists of volcanic, volcaniclastic, and plutonic rocks which range from Late Paleozoic to Early Cretaceous in age. The terrane crops out in a U-shaped belt which is roughly paralleled by outer belts of ultramafic rocks, oceanic plate basalts and cherts, and retrograded blueschist facies rocks of continental protolith. These rocks have been interpreted as components of a volcanic arc terrane that collided with the North American continental margin in Early Cretaceous time. The Koyukuk terrane consists of four time-stratigraphic units: (1) pre-Middle Jurassic basalts, (2) Middle and Late Jurassic granitic rocks, (3) lower Lower Cretaceous volcanic rocks, and (4) upper Lower Cretaceous volcanic rocks. Limited chemical data from the basalts of unit 1 indicate that they were erupted in a nonarc tectonic environment, possibly in an oceanic island or back arc setting. Units 2, 3, and 4 have the characteristics of subduction-related volcanic rocks (i.e., depleted Nb and Ta and enriched alkaline elements, relative to the light rare earth elements). Unit 3 contains tholeiitic, calc-alkaline, and alkaline rocks with chondrite-normalized rare earth element patterns that range from flat (La N /Yb N = 1) to highly light rare earth element enriched (La N /Yb N > 15). The highly alkaline or shoshonitic lavas were erupted toward the end of unit 3 time (Valanginian) during the final stages of arc-continent collision. These alkaline lavas could have been derived by very small degrees of partial melting of a similar source to that of the earlier arc lavas. Unit 4 lavas are also alkaline or shoshonitic, but their incompatible element composition indicates that they were derived from a different source than that of the earlier arc lavas. These late alkaline lavas are chemically similar to crosscutting mid-Cretaceous plutons whose isotopic compositions (Arth et al., this issue ( a )) suggest derivation by partial melting of distinctly older subcontinental lithosphere. We speculate that the parental magmas of unit 4 lavas may also have been derived by partial melting of this subcontinental mantle which was underthrust beneath the Koyukuk arc terrane during the final stage of arc-continent collision.

Journal of Geophysical Research Solid Earth↗
USGS2012

The Kanuti ophiolite, Alaska

The Kanuti ophiolite is a mafic-ultramafic thrust sheet of probable Jurassic age, formerly considered to be the upper part of the Yukon-Koyukuk ophiolite belt (Angayucham terrane). It is here called the Kanuti ophiolite after the Kanuti River region on the southeastern flank of the Yukon-Koyukuk Basin. The thrust sheet crops out discontinuously for a distance of more than 900 km along the northern and southeastern margins of the basin. It is probably correlative with similar ophiolite thrust sheets to the north in the western Brooks Range and to the south in the Ruby geanticline. Technically, the ophiolite is considered to be the Kanuti thrust panel of the Angayucham-Totzitna terrane. The Kanuti consistently overlies another extensive thrust sheet, consisting mostly of pillow basalt and radiolarian chert of Devonian to Jurassic age (Narvak thrust panel). This sheet is thrust over a third sheet consisting of probable Devonian phyllite and metagraywacke, which is in turn thrust over older metamorphic rocks (Slate Creek thrust panel). The Kanuti ophiolite is a partial ophiolite that consists of a lower residual mantle suite and an upper magmatic suite, but dikes, extrusives, and sediments are absent. The residual mantle suite is composed of harzburgite and dunite with refractory mineral compositions. The harzburgite is attributed to partial melting and extraction of basaltic magma; residual dunite is attributed to partial melting or to reaction of orthopyroxene out of harzburgite in contact with ascending melt diapirs. The magmatic suite consists of layered ultramafic and gabbroic rocks, containing minerals having limited iron enrichment. The absence of large volumes of magmatic rocks intermediate in composition between cumulus ultramafics and evolved gabbros favors periodic introduction of magma, rather than closed system fractional crystallization. The ultramafic rocks of both the residual mantle and magmatic suites are tectonites, which have undergone high-temperature deformation involving isoclinal folding on all scales and related syntectonic recrystallization. The olivine fabric is consistent with the glide system {0kl} [100], which has been produced experimentally at 800°–1190°C at 20 kbar. Olivine Z axes and subparallel isoclinal fold axes have consistent, northeast trends throughout the Kanuti region (>100 km NE-SW) and may be close to the original upper mantle flow direction, despite later low-angle thrust faulting. The order of crystallization in the cumulus ultramafic rocks of the magmatic suite is olivine, clinopyroxene, plagioclase, and orthopyroxene. The high Mg numbers of clinopyroxene (0.85–0.93) coexisting with olivine suggest that the cumulus ultramafic rocks crystallized at relatively high pressures (>10 kbar). The effects of parental magma composition cannot be evaluated, but the small difference in Mg numbers of coexisting olivine and clinopyroxene in the cumulus ultramafic rocks and in residual harzburgite suggests that regardless of absolute pressures, the pressure difference between the melting that produced the basalt magma and the initial fractional crystallization of the magma is small. Because of the limited range in rock types in the ophiolite, the tectonic environment cannot be interpreted unambiguously. However, the structural and petrological data are best reconciled with an origin in a volcanic arc tectonic setting.

Journal of Geophysical Research Solid Earth↗
USGS2012

Pillow basalts of the Angayucham terrane: Oceanic plateau and island crust accreted to the Brooks Range

The Angayucham Mountains (north margin of the Yukon-Koyukuk province) are made up of an imbricate stack of four to eight east-west trending, steeply dipping, fault slabs composed of Paleozoic (Devonian to Mississippean), Middle to Late Triassic, and Early Jurassic oceanic upper crustal rocks (pillow basalt, subordinate diabase, basaltic tuff, and radiolarian chert). Field relations and geochemical characteristics of the basaltic rocks suggest that the fault slabs were derived from an oceanic plateau or island setting and were emplaced onto the Brooks Range continental margin. The basalts are variably metamorphosed to prehnite-pumpellyite and low-greenschist facies. Major element analyses suggest that many are hypersthene-normative olivine tholeiites. Classification based on immobile trace elements confirms the tholeiitic character of most of the basalts but suggests that some had primary compositions transitional to alkali basalt. Although field and petrographic features of the basalts are similar, trace element characteristics allow definition of geographically distinct suites. A central outcrop belt along the crest of the mountains is made up of basalt with relatively flat rare earth element (REE) patterns. This belt is flanked to the north and south by LREE (light rare earth element)-enriched basalts. Radiolarian and conodont ages from interpillow and interlayered chert and limestone indicate that the central belt of basalts is Triassic in age, the southern belt is Jurassic in age, and the northern belt contains a mixture of Paleozoic and Mesozoic ages. Data for most of the basalts cluster in the “within-plate basalt” fields of trace element discriminant diagrams; none have trace-element characteristics of island arc basalt. The Triassic and Jurassic basalts are geochemically most akin to modern oceanic plateau and island basalts. Field evidence also favors an oceanic plateau or island setting. The great composite thickness of pillow basalt probably resulted from obduction faulting, but the lack of fault slabs of gabbro or peridotite suggests that obduction faults did not penetrate below oceanic layer 2, a likely occurrence if layer 2 were anomalously thick, as in the vicinity of an oceanic island. The presence of basaltic tuff interbeds indicates proximity to an explosive basaltic eruptive center. The juxtaposition of submarine basalts of differing chemical affinity and age, adjacent to higher-grade Paleozoic metamorphic rocks of the Brooks Range to the north, may be explained by obduction of internally complex (thickened) oceanic crust formed in an ocean plateau setting. Emplacement and rotation of thrust plates to steep attitudes occurred during accretion of the Brooks Range passive margin, probably beginning in the Late to Middle Jurassic.

Journal of Geophysical Research Solid Earth↗
USGS2012

Isotopic and trace element variations in the Ruby Batholith, Alaska, and the nature of the deep crust beneath the Ruby and Angayucham Terranes

Thirty-six samples from plutons of the Ruby batholith of central Alaska were collected and analyzed for 22 trace elements, and many were analyzed for the isotopic compositions of Sr, Nd, O, and Pb in order to delimit the processes that produced the diversity of granodioritic to granitic compositions, to deduce the nature of the source of magmas at about 110 Ma, and to characterize the deep crust beneath the Ruby and Angayucham terranes. Plutons of the batholith show a substantial range in initial 87 Sr/ 86 Sr (SIR) of 0.7055–0.7235 and a general decrease from southwest to northeast. Initial 143 Nd/ 144 Nd (NIR) have a range of 0.51150–0.51232 and generally increase from southwest to northeast. The δ 18 O values for most whole rocks have a range of +8.4 to +11.8 and an average of +10.3‰. Rb, Cs, U, and Th show large ranges of concentration, generally increase as SiO 2 increases, and are higher in southwest than in northeast plutons. Sr, Ba, Zr, Hf, Ta, Sc, Cr, Co, and Zr show large ranges of concentration and generally decrease as SiO 2 increases. Rare earth elements (REE) show fractionated patterns and negative Eu anomalies. REE concentrations and anomalies are larger in the southwest than in the northeast plutons. Uniformity of SIR and NIR in Sithylemenkat and Jim River plutons suggests a strong role for fractional crystallization or melting of uniform magma sources at depth. Isotopic variability in Melozitna, Ray Mountains, Hot Springs, and Kanuti plutons suggests complex magmatic processes such as magma mixing and assimilation, probably combined with fractional crystallization, or melting of a complex source at depth. The large variations in SIR and NIR in the batholith require a variation in source materials at depth. The southwestern plutons probably had dominantly siliceous sources composed of metamorphosed Proterozoic and Paleozoic upper crustal rocks. The northeastern plutons probably had Paleozoic sources that were mixtures of siliceous and intermediate to mafic crustal rocks. The inferred sources could well have been the higher-metamorphic-grade lithologic equivalents of the exposed Proterozoic(?) to Paleozoic schists, orthogneisses, and metavolcanic rocks of Ruby terrane, the silicic portions of which are quite radiogenic. The deeper crustal sources that gave rise to most of the batholithic magmas are inferred to be similar under both the Ruby metamorphic terrane and the Angayucham ophiolitic terrane.

Alaska↗
USGS2012

Remarkable isotopic and trace element trends in potassic through sodic Cretaceous plutons of the Yukon-Koyukuk Basin, Alaska, and the nature of the lithosphere beneath the Koyukuk terrane

During the period from 110 to 80 m.y. ago, a 450-km-long magmatic belt was active along the northern margin of Yukon-Koyukuk basin and on eastern Seward Peninsula. The plutons intruded Upper Jurassic(?) and Lower Cretaceous volcanic arc rocks and Cretaceous sedimentary rocks in Yukon-Koyukuk basin and Proterozoic and lower Paleozoic continental rocks in Seward Peninsula. Within Yukon-Koyukuk basin, the plutons vary in composition from calc-alkalic plutons on the east to potassic and ultrapotassic alkalic plutons on the west. Plutons within Yukon-Koyukuk basin were analyzed for trace element and isotopic compositions in order to discern their origin and the nature of the underling lithosphere. Farthest to the east, the calc-alkalic rocks of Indian Mountain pluton are largely tonalite and sodic granodiorite, and have low Rb (average 82 ppm), high Sr (>600 ppm), high chondrite-normalized (cn) Ce/Yb (16–37), low δ 18 O (+6.5 to +7.1), low initial 87 Sr/ 86 Sr (SIR) (0.704), and high initial 143 Nd/ 144 Nd (NIR) (0.5126). These rocks resemble those modelled elsewhere as partial melts and subsequent fractionates of basaltic or gabbroic metaigneous rocks, and may be products of melting in the deeper parts of the Late Jurassic(?) and Early Cretaceous volcanic arc. Farthest to the west, the two ultrapotassic bodies of Selawik and Inland Lake are high in Cs (up to 93 ppm), Rb (up to 997 ppm), Sr, Ba, Th, and light rare earth elements, have high (Ce/Yb)cn (30, 27), moderate to low δ 18 O (+8.4, +6.9), high SIR (0.712, 0.710), and moderate NIR (0.5121–0.5122). These rocks resemble rocks of Australia and elsewhere that were modelled as melts of continental mantle that had been previously enriched in large cations. This mantle may be Paleozoic or older. The farthest west alkalic pluton of Selawik Hills is largely monzonite, quartz monzonite, and granite; has moderate Rb (average 284 ppm), high Sr (>600 ppm), high (Ce/Yb)cn (15–25), moderate δ 18 O (+8.3 to +8.6), high SIR (0.708–0.712), and moderate NIR (0.5121–0.5122). These rocks may be the product of interaction of magma derived from old continental mantle and magma derived from old continental crust. Plutons between eastern and western extremes show completely gradational variations in the concentration of K and Rb and in the isotopic compositions of Sr, Nd, and O. These plutons probably originated either by melting in a mixed source composed of a Paleozoic or older continental section (mantle + crust) overlain by Mesozoic mafic arc rocks, or by mixing of ultrapotassic to potassic magmas from continental sources (mantle + crust), and tonalitic magmas from arc sources. We infer from these results that the northwest portion of Yukon-Koyukuk basin is underlain by a substantial continental basement of Paleozoic or greater age. This basement probably thins out to the east. There is no geochemical evidence for continental basement east of about longitude 157°, or along a belt of at least 50 km width flanking Ruby Geanticline as far to the southwest as about longitude 161°. These areas are probably underlain by oceanic and Mesozoic arc rocks.

Alaska↗
USGS2012

The nature of the crust in the Yukon-Koyukuk province as inferred from the chemical and isotopic composition of five Late Cretaceous to Early Tertiary volcanic fields in western Alaska

Late Cretaceous and early Tertiary volcanic and plutonic rocks in western Alaska comprise a vast magmatic province extending from the Alaska Range north to the Arctic Circle, south to Bristol Bay, and west to the Bering Sea Shelf. The chemical and isotopic composition of five of these Late Cretaceous to early Tertiary volcanic fields in the north central part of this province were studied to determine if Paleozoic or older continental crust underlies the Yukon-Koyukuk province. Three of the fields, the Blackburn Hills, Yukon River, and Kanuti, occur within the Yukon-Koyukuk province and two, the Sischu and Nowitna, overlie bordering Precambrian and Paleozoic metamorphic terranes to the southeast. High initial 87 Sr/ 86 Sr of 0.7075–0.7079 and moderate initial 143 Nd/ 144 Nd of 0.51244–0.51247 of rhyolite, dacite, and high-silica andesite of the Sischu volcanic field indicate that the magmas have interacted with the underlying Paleozoic or older continental crust. The relatively limited variation of isotopic (initial 87 Sr/ 86 Sr = 0.7044–0.7051; initial 143 Nd/ 144 Nd = 0.51256–0.51257) and elemental compositions of andesites from the Nowitna field can be accounted for by assimilation of small amounts of Paleozoic or older continental crust during crystal fractionation of andesite parent magmas at crustal levels. The Blackburn Hills field, which consists of medium-K basalt, andesite, and rhyolite intruded by a small granitic pluton, has a large range in initial 87 Sr/ 86 Sr and initial 143 Nd/ 144 Nd that plot in the field for 60 Ma mantle, from near mid-ocean ridge basalts to near “bulk-earth” compositions (initial 87 Sr/ 86 Sr = 0.7033–0.7052; initial 143 Nd/ 144 Nd = 0.51253–0.51290). Andesites and basalts from the Blackburn Hills are divided into two group on the basis of rare earth element (REE) and isotopic composition. Isotopic variation in the more primitive group 1 is best explained by assimilation of the lower crust of the Jurassic to Early Cretaceous Koyukuk terrane by mantle-derived basalts during crystal fractionation, though part of the isotopic variation may be due to metasomatism of an oceanic island basalt type mantle source by fluids derived from subducted sediments. Group 2 andesites from the Blackburn Hills have lower heavy REE abundances and more enriched isotopic compositions. These group 2 andesites and dacites from the Kanuti field, which have ( 87 Sr/ 86 Sr) i = 0.7043–0.7048 and ( 143 Nd/ 144 Nd) i = 0.51248–0.51267, appear to have formed by partial melting of the lower crust of the Koyukuk terrane. The Yukon River field consists of basalt, andesite, dacite, and rhyolite having ( 87 Sr/ 86 Sr) i = 0.7037–0.7051 and ( 143 Nd/ 144 Nd) i = 0.51266–0.51280; its isotopic composition does not require the presence of Paleozoic or older continental crust under the volcanic field and may have formed by interaction between mantle-derived melts and the oceanic Angayucham/Tozitna or island arc Koyukuk terrane. Most of the intrusive rocks and rhyolite domes from the Blackburn Hills volcanic field have ( 87 Sr/ 86 Sr) i = 0.7038–0.7041 and dacites from the Kanuti volcanic field have ( 87 Sr/ 86 Sr) i = 0.7043–0.7048. Thus little or no old continental crust was involved in the genesis of the Late Cretaceous and early Tertiary rocks and therefore probably does not extend beneath this part of the Yukon-Koyukuk province. However, the ultimate source of the small volumes of enriched shoshonitic andesite ( 87 Sr/ 86 Sr = 0.7075, 143 Nd/ 144 Nd = 0.5125) erupted at 118 Ma in the Yukon-Koyukuk province may be continental lithosphere, which may have been thrust under this part of the Yukon-Koyukuk province during arc-continent collision in the Early Cretaceous.

Journal of Geophysical Research Solid Earth↗
USGS2012

Crustal structure of the Chugach Mountains, southern Alaska: A study of peg‐leg multiples from a low‐velocity zone

A seismic refraction profile recorded along the geologic strike of the Chugach Mountains in southern Alaska shows three upper crustal high‐velocity layers (6.9, 7.2, and 7.6 km/s) and a unique pattern of strongly focussed echelon arrivals to a distance of 225 km. The group velocity of the ensemble of echelon arrivals is 6.4 km/s. Modeling of this profile with the reflectivity method reveals that the echelon pattern is due to peg‐leg multiples generated from within a low‐velocity zone between the second and third upper crustal high‐velocity layers. The third high‐velocity layer (7.6 km/s) is underlain at 18 km depth by a pronounced low‐velocity zone that produces a seismic shadow zone wherein peg‐leg multiples are seen as echelon arrivals. The interpretation of these echelon arrivals as multiples supersedes an earlier interpretation which attributed them to successive primary reflections arising from alternating high‐ and low‐velocity layers. Synthetic seismogram modeling indicates that a low‐velocity zone with transitional upper and lower boundaries generates peg‐leg multiples as effectively as one with sharp boundaries. No PmP or Pn arrivals from the subducting oceanic Moho at 30 km depth beneath the western part of the line are observed on the long‐offset (90–225 km) data. This may be due to a lower crustal waveguide whose top is the high‐velocity (7.6 km/s) layer and whose base is the Moho. A deep (∼54 km) reflector is not affected by the waveguide and has been identified in the data. Although peg‐leg multiples have been interpreted on some long‐range refraction profiles that sound to upper mantle depths, the Chugach Mountains profile is one of the few crustal refraction profiles where peg‐leg multiples are clearly observed. This study indicates that multiple and converted phases may be more important in seismic refraction/wide‐angle reflection profiles than previously recognized.

Alaska↗
USGS2012

The crustal structure of the Wrangellia Terrane along the East Glenn Highway, eastern‐southern Alaska

Recently acquired seismic refraction data from eastern‐southern Alaska provide new information on the structure and composition of the Wrangellia and adjacent terranes. The data comprise a 160‐km‐long refraction profile along the East Glenn (Tok‐Cutoff) Highway that was collected as part of the U.S. Geological Survey's multidisciplinary Trans‐Alaska Crustal Transect program. The upper 3 km of the Wrangellia terrane and associated rocks is characterized by low compressional wave velocities (V p = 1.9, 3.3, 4.6, 5.6 km s −1 ) and high‐velocity gradients common to most onshore seismic refraction profiles. There is also clear seismic expression of the West Fork fault system as a steep, down‐to‐the‐southwest fault that separates the Peninsular terrane to the southwest and the metamorphic complex of Gulkana River to the northeast. In contrast, no seismic expression occurs for the Paxson Lake fault, which separates the Wrangellia terrane from the metamorphic complex of Gulkana River. Adjacent to the Denali fault, within the Wrangellia terrane, two high‐velocity bodies (V p = 6.6 km s −1 ) occur in the upper crust. One of these extends to ∼10‐km depth and correlates with a late Paleozoic dioritic complex, suggesting that the Wrangellia terrane is at least 10 km thick in this part of Alaska. From 5 to 23 km depth, the crust appears seismically homogeneous, with velocity increasing from V p = 6.2 to V p = 6.6 km s −1 . Beneath this level, the crust is less well resolved, although evidence exists for a low‐velocity zone between 23 and 26 km and a possible southwest dipping interface at 35 km. No identifiable mantle refraction or reflection is observed, possibly indicating a crust as thick as 55 km. The relatively low seismic velocities in the upper 23 km of the crust compare favorably with laboratory‐measured velocities on pelitic schists and intermediate‐composition plutonic rocks (granites and granodiorites), both of which are recognized in Wrangellia. We interpret the seismic velocities to indicate that silicic‐to‐intermediate‐composition rocks are important constituents of the basement of this part of Wrangellia. Geologic evidence indicates that the Alaskan part of the Wrangellia terrane is a Paleozoic and Mesozoic island arc: our seismic evidence indicates it may have been built mostly on continental crust as opposed to the fragment of Wrangellia from Vancouver Island which was probably built on oceanic crust.

Alaska↗
USGS2012

Prodigious submarine landslides on the Hawaiian Ridge

The extensive area covered by major submarine mass wasting deposits on or near the Hawaiian Ridge has been delimited by systematic mapping of the Hawaiian exclusive economic zone using the side‐looking sonar system GLORIA. These surveys show that slumps and debris avalanche deposits are exposed over about 100,000 km 2 of the ridge and adjacent seafloor from Kauai to Hawaii, covering an area more than 5 times the land area of the islands. Some of the individual debris avalanches are more than 200 km long and about 5000 km 3 in volume, ranking them among the largest on Earth. The slope failures that produce these deposits begin early in the history of individual volcanoes when they are small submarine seamounts, culminate near the end of subaerial shield building, and apparently continue long after dormancy. Consequently, landslide debris is an important element in the internal structure of the volcanoes. The dynamic behavior of the volcanoes can be modulated by slope failure, and the structural features of the landslides are related to elements of the volcanoes including rift zones and fault systems. The landslides are of two general types, slumps and debris avalanches. The slumps are slow moving, wide (up to 110 km), and thick (about 10 km) with transverse blocky ridges and steep toes. The debris avalanches are fast moving, long (up to 230 km) compared to width, and thinner (0.05–2 km); they commonly have a well‐defined amphitheater at their head and hummocky terrain in the lower part. Oceanic disturbance caused by rapid emplacement of debris avalanches may have produced high‐level wave deposits (such as the 365‐m elevation Hulopoe Gravel on Lanai) that are found on several islands. Most present‐day submarine canyons were originally carved subaerially in the upper parts of debris avalanches. Subaerial canyon cutting was apparently promoted by the recently steepened and stripped slopes of the landslide amphitheaters.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Historic surface slip along the San Andreas Fault near Parkfield, California

The Parkfield Earthquake Prediction Experiment is focusing close attention on the 44-km-long section of the San Andreas fault that last ruptured seismically in 1966 ( M s 6.0). The 20-km-long central segment of the 1966 Parkfield rupture, extending from the mainshock epicenter at Middle Mountain southeastward to Gold Hill, forms a 1- to 2-km salient northeastward away from the dominant N40°W strike. Following the 1966 earthquake afterslip, aseismic slip has been nearly constant. Moderate Parkfield earthquakes have recurred on average every 21 years since 1857, when a great earthquake ( M ≈8) ruptured at least as far north as the southern Parkfield segment. Many measurements of slip have been made near Parkfield since 1966. Nevertheless, much of the history of surface slip remained uncertain, especially the total amount associated with the 1966 event. In 1985 we measured accumulated slip on the four oldest cultural features offset by the fault along the 1966 Parkfield rupture segment. We interpret net slip on each feature as a sum of event slip (sum of coseismic and rapid preseismic and postseismic slip) from Parkfield earthquakes and steady interseismic slip as measured over the last 20 years on nearby alinement arrays, creep meters, and trilateration lines. We assumed for each site that event slip was identical for the 1922, 1934, and 1966 Parkfield events and that long-term average rate of interseismic slip was constant between all events. Two fences on the southern segment, southeast of Gold Hill, indicate event slip of 13 and 15 cm and interseismic slip rate of 0.36 and 0.30 cm/yr since 1959 and 1908, respectively. At these sites, redundant independent data support our assumption that both event and interseismic slip occur uniformly. On the central segment, near Parkfield, both the 1934 and the 1966 ruptures offset a bridge built in 1932. Interseismic slip rate near the bridge has been about 1.1 cm/yr since 1966; thus we deduce an average event slip of 31 cm for the 1934 and 1966 earthquakes. On a parallel fault trace, 1 km to the southwest, slip was about 8 cm in 1966; thus total event slip summed across the entire fault zone near Parkfield was nearly 40 cm. On Middle Mountain, 4 km north of the 1966 mainshock epicenter, an offset fence indicates 17 cm of slip in 1966 and a 2.26-cm/yr interseismic slip rate since circa 1946. Thus the central segment of the 1966 rupture is characterized by much larger event slip (∼40 cm) than both distal segments (∼15 cm). This amount of surface slip per event is about twice what had been previously assumed. Larger 1966 surface slip in the central part of the rupture is geodetically compatible with a coseismic slip of 65±10 cm slip on a narrow, buried asperity between Middle Mountain and Gold Hill that has been inferred from the depth distribution of early aftershocks. Assuming our characteristic surface slip model, one can further deduce a deficit in slip since the great 1857 earthquake. Taking the long-term slip rate as 3.3 cm/yr, the surface slip deficit is 3±0.2 m south of Gold Hill but only 0.3±0.3 m northward from Parkfield.

Journal of Geophysical Research Solid Earth↗
USGS2012

Pb, Sr, and Nd isotopes in seamount basalts from the Juan de Fuca Ridge and Kodiak-Bowie seamount chain, northeast Pacific

Pb, Sr, and Nd isotopic ratios and their parent/daughter element concentrations for 28 basalts from 10 hotspot and nonhotspot seamounts are reported. Nd and Sr isotopic compositions ( 143 Nd/ 144 Nd = 0.51325–0.51304; 87 Sr/ 86 Sr = 0.70237–0.70275) plot in the envelope for Juan de Fuca-Gorda ridge basalts with tholeiitic basalts showing more depleted sources and a better negative correlation than transitional to alkalic basalts. Pb isotopic ratios in tholeiitic and alkalic basalts overlap ( 206 Pb/ 204 Pb = 18.29–19.44) and display a trend toward more radiogenic Pb in alkalic basalts. The isotopic data for hotspot and nonhotspot basalts are indistinguishable and correlate broadly with rock composition, implying that they are controlled by partial melting. The isotopic variation in the seamount basalts is about 60% (Nd-Sr) to 100% (Pb) of that in East Pacific Rise basalts and is interpreted as a lower limit for the magnitude of mantle heterogeneity in the northeast Pacific. The data indicate absence of a chemically distinct plume component in the linear seamount chains and strongly suggest an origin from mid-ocean ridge basalt-like east Pacific mantle.

Journal of Geophysical Research Solid Earth↗
USGS2012

Late Cretaceous paleomagnetism and clockwise rotation of the Silver Bell Mountains, south central Arizona

Late Cretaceous ash flow volcanism in the Silver Bell Mountains of southern Arizona (32.3°N, 248.5°E) was associated with caldera formation and porphyry copper mineralization. Oriented samples from 34 sites in volcanic, volcaniclastic, and intrusive units related to this episode of igneous activity (73–69 Ma) yield a mean paleomagnetic direction of I = 61.2°, D = 24.0°, α 95 = 7.6°. Primary remanent magnetizations are indicated by the presence of both normal and reversed polarities and by the significantly improved grouping (95% confidence level) of site-mean directions for a widespread tuff unit after structural correction. A comparison of this direction with a direction at Silver Bell calculated from contemporaneous units for stable North America ( I = 58.8°, D = 342.3°, α 95 = 7.7°) indicates a Late Cretaceous paleolatitude anomaly of −2.4°±7.6° (not significant at the 95% confidence level) and a declination anomaly of 41.7°±14.3° for the Silver Bell Mountains. Previously determined paleomagnetic data for southeastern Arizona suggest that this apparent clockwise rotation in the Silver Bell Mountains is a local phenomenon. Although preliminary, the average paleomagnetic direction for Oligocene and lower Miocene rocks in the Silver Bell area ( I = 43.8°, D = 357.3°, α 95 = 16.5°) is similar to that calculated for stable North America ( I = 50.2°, D = 352.2°, α 95 = 3.9°), implying that the observed rotation in the Silver Bell Mountains occurred before 26 Ma and was most likely associated with dextral strike-slip movement along the Ragged Top and related WNW trending faults bounding the Silver Bell Mountain block. These data, in conjunction with plate reconstructions and other paleomagnetic data from southwestern North America, imply that WNW trending strike-slip faults may have played an important role during Late Cretaceous to early Tertiary deformation in southern Arizona.

Journal of Geophysical Research Solid Earth↗
USGS2012

Age of the Peach Springs Tuff, southeastern California and western Arizona

Sanidine separates from pumice of the early Miocene Peach Springs Tuff are concordantly dated at 18.5±0.2 Ma by two isotopic techniques. The Peach Springs Tuff is the only known unit that can be correlated between isolated outcrops of Miocene strata from the central Mojave Desert of southeastern California to the western Colorado Plateau in Arizona, across five structural provinces, a distance of 350 km. Thus the age of the Peach Springs Tuff is important to structural and paleogeographic reconstructions of a large region. Biotite and sanidine separates from bulk samples of the Peach Springs Tuff from zones of welding and vapor-phase alteration have not produced consistent ages by the K-Ar method. Published ages of mineral separates from 17 localities ranged from 16.2 to 20.5 Ma. Discordant 40 Ar/ 39 Ar incremental release spectra were obtained for one biotite and two of the sanidine separates. Ages that correspond to the last gas increments are as old as 27 Ma. The 40 Ar/ 39 Ar incremental release determinations on sanidine separated from blocks of Peach Springs Tuff pumice yield ages of 18.3±0.3 and 18.6±0.4 Ma. Laser fusion measurements yield a mean age of 18.51±0.10. The results suggest that sanidine and biotite K-Ar ages older than about 18.5 Ma are due to inherited Ar from pre-Tertiary contaminants, which likely were incorporated into the tuff during deposition. Sanidine K-Ar ages younger than 18 Ma probably indicate incomplete extraction of radiogenic 40 Ar, whereas laser fusion dates of biotite and hornblende younger than 18 Ma likely are due to postdepositional alteration. Laser fusion ages as high as 19.01 Ma on biotite grains from pumice suggest that minerals from pre-Tertiary country rocks also were incorporated in the magma chamber.

Journal of Geophysical Research Solid Earth↗
USGS2012

Tertiary basin development and tectonic implications, Whipple Detachment System, Colorado River Extensional Corridor, California and Arizona

Colorado River extensional corridor. In the Mohave Mountains and Aubrey Hills of Arizona and the eastern Whipple Mountains of California near Parker Dam, these deposits comprise four unconformity-bounded sequences composed of locally derived epiclastic and volcanic rocks and the Peach Springs Tuff. The three older sequences represent syntectonic units that were deposited coeval with detachment faulting, and the fourth is interpreted to be postextensional. The sequences are correlated between four fault-bounded regions, which are the remnants of four different depositional basins. Similar sequences can be correlated over broad areas of the extensional corridor despite the general lack of widespread units. The basins developed in about the same positions, relative to each other and to volcanic sources, as they occupy at present. This is shown by gradational changes of pre-Tertiary rock types between regions, systematic variations in the abundance of magmatic units, and correlative volcanic units that occur in two adjacent regions. The basins formed in the early Miocene from segmentation of the upper crust into blocks bounded by high-angle faults that trended both parallel and perpendicular to the direction of extension and which were terminated at middle crustal depths by a low-angle detachment fault. Extreme rotation of one large crustal block, which constitutes the central Mohave Mountains, is recorded by a major unconformity in the lower Miocene section of one basin. Because coeval sections that formed in adjoining basins do not record this rotation, the underlying crustal blocks must have been separated by transfer faults that allowed them to rotate independently. These proposed transfer faults are represented at present by major faults with trends that parallel the direction of extension on the Whipple detachment system.

Arizona, California↗
USGS2012

Lithology and evolution of the crust-mantle boundary region in the southwestern Basin and Range Province

Mantle and crustal xenoliths from volcanic rocks in the southwestern Basin and Range province and Colorado Plateau Transition Zone reveal histories of episodic magmatism and deformation that have profoundly influenced the crustal structure of this region. Seismic transects in this area show a strongly reflective Moho of generally low relief, which, in the area of modern transects, consists of a thin zone (<2 km thick) of short reflectors. The upper mantle is transparent and has a P n of 7.8–8.0 km/s similar to much of the western United States. A lower crustal zone, 2–13 km thick, has variable internal reflectivity and a relatively low velocity of 6.6–6.8 km/s. Upper mantle peridotite xenoliths show both ductile and brittle deformational features and have structures and compositions affected by magmatic intrusion; intrusions form complex dike systems and extensive zones of grain boundary infiltration in peridotite xenoliths. Whereas melt infiltration preceded and followed ductile deformation, brittle deformation, represented by closely spaced joint systems and faults, followed ductile deformation and is related to the youngest magmatic episodes. These structural characteristics and high uppermost mantle temperature (∼1000°C) may combine to explain the relatively low P n . Alternating layers of ductily deformed and undeformed peridotites, with or without igneous intrusions, may contribute to the reflectivity of the Moho. Lower crustal xenoliths are dominantly igneous-textured pyroxenites and mafic to intermediate gabbros identical to the dikes in peridotite xenoliths. The crustal xenoliths also commonly are jointed, and in addition many show partial melting and have abundant cavities that probably were filled with CO 2 -rich fluids. These rocks are interpreted as products of underplated magmas that were fed through the mantle dike systems and may represent the lowest crustal unit identified in the seismic records. The mafic compositions and high densities of the crustal xenoliths indicate that the low velocity of the lower crust may be caused in part by fracture systems, partial melts, and high temperatures. Garnet granulite xenoliths from a locality with no mantle peridotite xenoliths probably represent crust of the region before late Miocene extension. Felsic granulite xenoliths from two localities have velocities like those of the two lower crustal units identified seismically and could be present in the modern crust as unequilibrated remnants of old crust. The preferred model for the evolution of the lower lithosphere is one in which extension affects the upper mantle as well as the crust and is overlapped in time by multiple magmatic episodes. The earliest magmatic events preceded extension, and later events accompanied and followed extension.

Arizona, California, Nevada↗
USGS2012

Crustal strain near the Big Bend of the San Andreas Fault: Analysis of the Los Padres-Tehachapi Trilateration Networks, California

In the region of the Los Padres-Tehachapi geodetic network, the San Andreas fault (SAF) changes its orientation by over 30° from N40°W, close to that predicted by plate motion for a transform boundary, to N73°W. The strain orientation near the SAF is consistent with right-lateral shear along the fault, with maximum shear rate of 0.38±0.01 μrad/yr at N63°W. In contrast, away from the SAF the strain orientations on both sides of the fault are consistent with the plate motion direction, with maximum shear rate of 0.19±0.01 μrad/yr at N44°W. The strain rate does not drop off rapidly away from the fault, and thus the area is fit by either a broad shear zone below the SAF or a single fault with a relatively deep locking depth. The fit to the line length data is poor for locking depth d less than 25 km. For d of 25 km a buried slip rate of 30 ± 6 mm/yr is estimated. We also estimated buried slip for models that included the Garlock and Big Pine faults, in addition to the SAF. Slip rates on other faults are poorly constrained by the Los Padres-Tehachapi network. The best fitting Garlock fault model had computed left-lateral slip rate of 11±2 mm/yr below 10 km. Buried left-lateral slip of 15±6 mm/yr on the Big Pine fault, within the Western Transverse Ranges, provides significant reduction in line length residuals; however, deformation there may be more complicated than a single vertical fault. A subhorizontal detachment on the southern side of the SAF cannot be well constrained by these data. We investigated the location of the SAF and found that a vertical fault below the surface trace fits the data much better than either a dipping fault or a fault zone located south of the surface trace.

Journal of Geophysical Research Solid Earth↗
USGS2012

H2O grain size and the amount of dust in Mars' residual North polar cap

In Mars' north polar cap the probable composition of material residual from the annual condensation cycle is a mixture of fine dust and H 2 O grains of comparable size and abundance. However, metamorphism of such material will gradually lower its albedo by increasing the size of the H 2 O grains only. If the cap is undergoing net annual sublimation (as inferred from water vapor observations), late summer observations should be of old ice with H 2 O grain sizes of 100 μm or more. Ice of this granularity containing 30% fine dust has a reflectivity similar to that of dust alone; the observed albedo and computed ice grain size imply dust concentrations of 1 part per 1000 or less. The brightness of the icy areas conflicts with what would be expected for a residual cap deposited by an annual cycle similar to that observed by Viking and aged for thousands of years. The residual cap surface cannot be “old dirty” ice. It could be old, coarse, and clean; or it could be young, fine, and dirty. This brings into question both the source of the late summer water vapor and the formation rate of laminated terrain.

Journal of Geophysical Research↗