SEARCH · Search USGS

Results for “Rocks & Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87Linked to original sources

USGS1963

Studies of fluid inclusions; [Part] 2, Freezing data and their interpretation

Aqueous and non-aqueous inclusions in 84 samples of various minerals from a wide range of geologic environments were studied with the freezing stage in order to gain an insight into the range of concentrations and compositions of fluid inclusions . Inclusions in most Mississippi Valley-type ore minerals contain highly concentrated saline solutions, showing freezing temperatures between -23.4° and -10.5° C; minerals from ore deposits of more typically hydrothermal affiliations mainly show temperatures of -9.4° to nearly 0° C; and inclusions in quartz crystals from sedimentary, metamorphic, and igneous rock environments show a wide range of freezing temperatures. Inclusions in pegmatite minerals in particular vary over a wide range, from the most concentrated solutions found in any inclusion (> 40% salts) to fairly dilute solutions (< 5% salts). Most inclusions in quartz from Swiss Alpine-type veins, and from Brazilian quartz veins and pegmatites, show freezing temperatures in the range -8.5° to - 2 .5°, and considerable free C02. Other geologic environments sampled include Colombian emerald, pegmatitic topaz and fluorite, the Triassic traprock zeolite assemblage, and sedimentary halite beds. Not all the phenomena exhibited by inclusions at low temperature are completely understood at present but several crystalline hydrate phases, such as NaCl-2H,0 and CO,-5%H,0 (structural formula 8C02-46H20), are shown to be stable in inclusions of appropriate composition even at temperatures above 0° C, and probably exist in the inclusions in natural rocks in polar regions. More significantly, the formation and recognition of such phases aid in establishing the gross composition of individual inclusions far too small for chemical analysis. The data obtained are useful in a variety of ways, such as: discriminating among gas, liquid, and supercritical fluid , and among liquid water, liquid oil, and liquid C02 in inclusions ; improving precision of the pressure corrections applied to inclusion filling temperature determinations; proving the general lack of leakage into or out of inclusions ; estimating the minimum pressure at the time of deposition of certain samples; verifying the lack of extraneous solid crystallization nuclei in the inclusions and hence their formation from exceedingly quiet, clean solutions; determining the total equivalent NaCl concentrations and some information concerning the composition of the fluids from which ores have formed; and determining changes in the composition of the fluids bathing a single crystal during its growth, and at certain times throughout its history.

Economic Geology↗

USGS2002

Geology, mineralization, and hydrothermal alteration and relationships to acidic and metal-bearing surface waters in the Palmetto Gulch area, southwestern Colorado

The Palmetto Gulch area is affected by low pH and metal-bearing drainage from abandoned mines, and perhaps, from natural weathering around vein zones. To investigate these anthropogenic and potential natural sources of acidity and metals, we mapped the geology, veins, and hydrothermally altered areas; conducted mine dump leachate studies; and collected reconnaissance water quality data. Several small abandoned mines are present in the Palmetto Gulch area that produced small amounts of relatively high-grade silver ore from fault-controlled polymetallic vein deposits. These veins are hosted in lavas, breccias, and related volcaniclastic sediments that ponded within the 28 Ma San Juan-Uncompahgre caldera complex. These rock units generally have conformable contacts and have shallow dips to the northwest. Lava flows of pyroxene andesite, which host the Roy-Pray mine, are massive near their base and typically grade upward into tightly jointed rock with 2-15 cm joint spacing. In general, most hydrothermally altered rock within the Palmetto Gulch area is restricted to envelopes surrounding the mineralized veins and faults. Composite zones of vein-related alteration vary from about 50 to 80 m wide along the high ridgelines and narrow to less than 10 to 15 m beneath an elevation of about 5,462 m. Where unaffected by surficial oxidation, these altered zones contain as much as 7 to 10 volume percent finely-disseminated pyrite. The majority of rocks in the area were affected by regional and vein-related propylitic alteration. These greenish-colored rocks have alteration products consisting of chlorite, illite, and calcite; and feldspars are typically weakly altered. Most of these rocks have detectable amounts of calcite, while as much as 11 percent by weight was detected in samples collected during this study. The Palmetto Gulch area is affected by low pH and metal-bearing drainage from abandoned mines, and perhaps, from natural weathering around vein zones. To investigate these anthropogenic and potential natural sources of acidity and metals, we mapped the geology, veins, and hydrothermally altered areas; conducted mine dump leachate studies; and collected reconnaissance water quality data. Several small abandoned mines are present in the Palmetto Gulch area that produced small amounts of relatively high-grade silver ore from fault-controlled polymetallic vein deposits. These veins are hosted in lavas, breccias, and related volcaniclastic sediments that ponded within the 28 Ma San Juan-Uncompahgre caldera complex. These rock units generally have conformable contacts and have shallow dips to the northwest. Lava flows of pyroxene andesite, which host the Roy-Pray mine, are massive near their base and typically grade upward into tightly jointed rock with 2-15 cm joint spacing. In general, most hydrothermally altered rock within the Palmetto Gulch area is restricted to envelopes surrounding the mineralized veins and faults. Composite zones of vein-related alteration vary from about 50 to 80 m wide along the high ridgelines and narrow to less than 10 to 15 m beneath an elevation of about 5,462 m. Where unaffected by surficial oxidation, these altered zones contain as much as 7 to 10 volume percent finely-disseminated pyrite. The majority of rocks in the area were affected by regional and vein-related propylitic alteration. These greenish-colored rocks have alteration products consisting of chlorite, illite, and calcite; and feldspars are typically weakly altered. Most of these rocks have detectable amounts of calcite, while as much as 11 percent by weight was detected in samples collected during this study.

Colorado↗

USGS1957

Geology of Saipan, Mariana Islands; Part 2, Petrology and soils

The rocks that comprise the volcanic formations of Saipan are of two principal types: dacites, which are characteristically glassy, and andesites, which are comparatively crystalline. The dacites consist primarily of silicic glass, oligoclase, and silica minerals (quartz, tridymite, cristobalite, chalcedony, and opal). Minor constituents in these rocks are green hornblende, biotite, magnetite, and hematite. The andesites are composed principally of labradorite, hypersthene, augite, and subcalcrc augite. Minor but also characteristic constituents of the andesites are quartz, tridymite, cristobalite, anorthoclase, and accessory magnetite, ilmenite, rutile, and apatite. Nine varieties of dacite and andesite are recognized on the basis of chemical composition, mineralogy, and texture. These are dacite, dacite vitrophyre, dacite perlite, hornblende-bearing dacite porphyry, augite-hypersthene andesite, quartz-bearing augite-hypersthene andesite, quartz-bearing augite-hypersthene andesite porphyry, augite andesite, and hypersthene andesite.

Professional Paper↗

USGS2021

Weakening of peridotite sheared at hydrothermal conditions

We conducted triaxial friction tests at hydrothermal conditions (25°C–350°C) on gouges of peridotite and its principal mineral constituents olivine and orthopyroxene. Pore-fluid chemistry was varied by the use of peridotite, granite, or quartzite driving blocks (representing wall rock) housing the gouge layer. Samples sheared at slow rates initially strengthen to a peak value, and then weaken toward a residual strength. The transition is accompanied by a change from velocity-weakening to velocity-strengthening behavior marked by a series of small stress drops. The extent of weakening varies with the ultramafic mineralogy and with the chemical environment established by the driving block lithology. The strengths of olivine and olivine-rich peridotite gouges decrease substantially (to μ ∼ 0.25–0.30), and that of orthopyroxene to a lesser extent, at temperatures ≥200°C when sheared between crustal driving blocks. Less weakening is observed in the peridotite-block experiments; the minimum strength of the peridotite gouges ( μ ∼ 0.5) occurs at 250°C, the temperature at which olivine hydration rates are near their maximum in ultramafic rocks. The strength reductions in all experiments are attributed to solution-transfer (pressure solution) processes that come to predominate over cataclastic mechanisms during shear. The lower pH of fluids in contact with silica-saturated crustal rocks enhances the weakening of olivine-rich gouges. In these short-duration experiments, secondary phyllosilicate mineral growth was of a limited extent and varied with gouge and wall-rock mineralogy and with temperature. Over geologic time spans, however, the alteration assemblages will assume an increasingly important role in fault-zone behavior.

Geochemistry, Geophysics, Geosystems↗

USGS1980

A generalized garnet-forming reaction for metaigneous rocks in the Adirondacks

A generalized reaction is presented to account for garnet formation in a variety of Adirondack metaigneous rocks. This reaction, which is the sum of five partial reactions written in aluminum-fixed frames of reference, is given by: 4(y+1+w)Anorthite+4 k(y+1+2 w)Olivine +4(1-k)(y+1+2 w)Fe-oxide+(8(y+1) -4 k(y+1+2 w))Orthopyroxene = 2(y+1)Garnet +2(y+1+2 w)Clinopyroxene+4 wSpinel where y is a function of plagioclase composition, k refers to the relative amounts of olivine and Fe-oxide participating in the reaction, and w is a measure of silicon mobility. When mass balanced for Mg and Fe, this reaction is found to be consistent with analyzed mineral compositions in a wide range of Adirondack metaigneous rocks. The reaction applies equally well whether the garnets were formed directly from the rectants given above or went through an intermadiate stage involving the formation of spinel, orthopyroxene, and clinopyroxene. The actual reactions which have produced garnet in both undersaturated and quartz-bearing rocks are special cases of the above general reaction. The most important special cases appear to be those in which the reactants include either olivine alone (k=1) or Fe-oxide alone (k=0). Silicon is relatively immobile (w =2) in olivine bearing, magnesium-rich rocks (k???1), and this correlates with the increased intensity in spinel clouding of plagioclase in these rocks. Silicon mobility apparently increases in the more iron-rich rocks, which also tend to contain clear or lightly clouded plagioclase. In all the rocks studied the most common composition of metamorphic plagioclase is close to An33 (i.e., y=1). Plagioclase of lower anorthite content may be too sodic to participate in garnet formation at the P-T conditions involved. ?? 1980 Springer-Verlag.

Contributions to Mineralogy and Petrology↗

USGS2009

U.S. Geological Survey research in Handcart Gulch, Colorado—An alpine watershed with natural acid-rock drainage

Handcart Gulch is an alpine watershed along the Continental Divide in the Colorado Rocky Mountain Front Range. It contains an unmined mineral deposit typical of many hydrothermal mineral deposits in the intermountain west, composed primarily of pyrite with trace metals including copper and molybdenum. Springs and the trunk stream have a natural pH value of 3 to 4. The U.S. Geological Survey began integrated research activities at the site in 2003 with the objective of better understanding geologic, geochemical, and hydrologic controls on naturally occurring acid-rock drainage in alpine watersheds. Characterizing the role of groundwater was of particular interest because mountain watersheds containing metallic mineral deposits are often underlain by complexly deformed crystalline rocks in which groundwater flow is poorly understood. Site infrastructure currently includes 4 deep monitoring wells high in the watershed (300– 1,200 ft deep), 4 bedrock (100–170 ft deep) and 5 shallow (10–30 ft deep) monitoring wells along the trunk stream, a stream gage, and a meteorological station. Work to date at the site includes: geologic mapping and structural analysis; surface sample and drill core mineralogic characterization; geophysical borehole logging; aquifer testing; monitoring of groundwater hydraulic heads and streamflows; a stream tracer dilution study; repeated sampling of surface and groundwater for geochemical analyses, including major and trace elements, several isotopes, and groundwater age dating; and construction of groundwater flow models. The unique dataset collected at Handcart Gulch has yielded several important findings about bedrock groundwater flow at the site. Most importantly, we find that bedrock bulk permeability is nontrivial and that bedrock groundwater apparently constitutes a substantial fraction of the hydrologic budget. This means that bedrock groundwater commonly may be an underappreciated component of the hydrologic system in studies of alpine watersheds. Additionally, despite the complexity of the fracture controlled aquifer system, it appears that it can be represented with a relatively simple conceptual model and can be treated as an equivalent porous medium at the watershed scale. Interpretation of existing data, collection of new monitoring data, and efforts to link geochemical and hydrologic processes through modeling are ongoing at the site.

Colorado↗

USGS1983

Mineral resource potential map of the Blanco Mountain and Black Canyon Roadless Areas, Inyo and Mono Counties, California

On the basis of geologic, geochemical, and geophysical investigations and a survey of mines and prospects, the mineral resource potential for gold, silver, lead, zinc, tungsten, and barite of the Blanco Mountain and Black Canyon Roadless Areas is judged to be low to moderate, except for one local area that has high potential for gold and tungsten resources. A geochemical survey detected moderately anomalous amounts of lead, copper, and zinc and less anomalous concentrations of tungsten, gold, and silver. Elements in anomalous samples were grouped as suites known to form in various ore deposits. Four element suites that may be indicative of mineralization are recognized in the White Mountains: (1) lead, zinc, and silver in carbonate rocks; (2) copper, barite, and lead in veins and replacement bodies; (3) tungsten, molybdenum, and bismuth in skarns; and (4) gold and arsenic in mineralized quartz veins. The assessment of the areas of resource potential was made in part by the application of ore deposit models to the geochemical results. A mineral deposit survey by the U.S. Bureau of Mines indicates that there are no properties with identified mineral resources in the Blanco Mountain Roadless Area. There is one active placer claim. In the Black Canyon Roadless Area, two properties have 40,000 tons of indicated and inferred low-grade gold, silver, or lead-bearing rock. Five properties near this roadless area have 150,000 tons of indicated and inferred low-grade gold, silver, lead, zinc, or tungsten-bearing rock. About 90 percent of this tonnage is estimated to occur at the Mirage-Mariposa and the Hope mines. The roadless areas have no known resource potential for geothermal energy, coal, oil, or gas.

California↗

USGS1967

Specific yield: compilation of specific yields for various materials

Specific yield is defined as the ratio of (1) the volume of water that a saturated rock or soil will yield by gravity to (2) the total volume of the rock or soft. Specific yield is usually expressed as a percentage. The value is not definitive, because the quantity of water that will drain by gravity depends on variables such as duration of drainage, temperature, mineral composition of the water, and various physical characteristics of the rock or soil under consideration. Values of specific yields nevertheless offer a convenient means by which hydrologists can estimate the water-yielding capacities of earth materials and, as such, are very useful in hydrologic studies. The present report consists mostly of direct or modified quotations from many selected reports that present and evaluate methods for determining specific yield, limitations of those methods, and results of the determinations made on a wide variety of rock and soil materials. Although no particular values are recommended in this report, a table summarizes values of specific yield, and their averages, determined for 10 rock textures. The following is an abstract of the table. [Table]

Water Supply Paper↗

USGS1996

Chronology of Late Cretaceous igneous and hydrothermal events at the Golden Sunlight gold-silver breccia pipe, southwestern Montana

Gold mineralization at the Golden Sunlight breccia pipe, southwestern Montana, is related to emplacement of Late Cretaceous alkali-calcic rhyolite and subsequent collapse of the Belt Supergroup wallrock and rhyolite in the pipe. The pipe is inferred to grade downward into an alkalic porphyry molybdenum system. The pipe is cut by alkalic to sub-alkalic lamprophyre dikes and sills, which locally contain high-grade gold where emplaced along late shear zones and vein systems. Determination of the emplacement age of the rhyolite is hampered by inherited lead or inherited Late Archean zircon from the source region of the rhyolite. An emplacement age of about 80 Ma for the rhyolite can be inferred if a basement age of 2,600 Ma is assumed. This Late Archean age is in agreement with basement ages determined in many parts of southwestern Montana. A 206 Pb- 238 U whole-rock date of 84 ? 18 Ma from altered and mineralized Belt Supergroup strata and rhyolite in the breccia pipe indicates hydrothermal alteration related to gold mineralization in Late Cretaceous time. Although sericite is a relatively widespread hydrothermal mineral, attempts to date the very fine grained material by the 40 Ar- 39 Ar method did not provide a spectra that could be interpreted unambiguously. A 40 Ar- 39 Ar plateau date of 76.9 ? 0.5 Ma from biotite phenocrysts in the lamprophyre indciates intrusion of mafic magma and attendant CO 2 metasomatism in the Late Cretaceous. Fission-track data from zircon in the rhyolite are permissive of slow uplift of the Belt Supergroup strata, 1U.S. Geological Survey, Box 25046, Denver Federal Center, Denver, CO 80225. 2Golden Sunlight Mines, Inc., 453 MT Highway 2 East, Whitehall, MT 59759. rhyolite, and lamprophyre between 55 and 50 Ma, but the data are not definitive. Rhyolitic welded tuff in the informally named units 7, 9, and 11 of the Elkhorn Mountains Volcanics is most similar in chemistry and age to the rhyolite at the Golden Sunlight mine. Trachybasalt in the Adel Mountains Volcanics and andesitic basalt in the informally named unit 8 of the Elkhorn Mountains Volcanics are the most analogous in chemistry and age to lamprophyres at the mine. The rhyolitic rocks appear to be derived from deep crustal sources, but data for the lamprophyres and mafic rocks in the Elkhorn Mountains Volcanics indicate that they were derived from the mantle.

Bulletin↗

USGS2006

Geology and mineral deposits of the Snow Camp-Saxapahaw area, central North Carolina

The Snow Camp-Saxapahaw study area, in the Carolina slate belt in the Southeastern United States, is notable for large zones of high-sulfidation alteration in arc-related metavolcanic rocks. The area has potential for additional significant pyrophyllite and related aluminosilicate refractory mineral deposits and may have potential for small- to medium-size gold deposits also associated with the high-sulfidation hydrothermal systems. The Carolina slate belt is an elongate zone of mostly low-grade metamorphic rocks of Neoproterozoic to early Paleozoic age that extends from northeastern Georgia to southern Virginia. It is dominated by volcanic rocks but locally consists of fine-grained epiclastic sedimentary rocks. Plutons and subvolcanic bodies have intruded the rocks of the Carolina slate belt in many places and have been important in controlling the metamorphism and in localizing hydrothermal alteration. The Snow Camp-Saxapahaw area is mostly underlain by volcanic and volcaniclastic rocks and lesser amounts of intrusive shallow plutons. The volcanic rocks range in composition from basalt to rhyolite; however andesites, dacites, and rhyodacites are the most abundant. The intrusive bodies are largely granite and quartz monzonite; gabbroic bodies also are common. It was possible to establish the relative ages of only part of these rocks. Two northeast-trending fault zones and fractures divide the map area into three structural blocks; the central block was tilted down to the southwest to form a grabenlike structure. Most of the hydrothermally altered rocks and all of the intensely altered zones are confined to the downdropped block, which we think may have been calderalike in origin. A major volcanic unit, the Reedy Branch Tuff, is limited to the southwestern part of the graben and may be the youngest volcanic rock in the area. Layered rocks record one or more strong folding events, but the diversity of rock types, lack of recognizable stratigraphic markers, and uneven distribution of outcrops prevented comprehensive structural studies. Except for a few late plutons and dikes, all of the rocks of the area have been metamorphosed in middle to upper greenschist facies, and contact aureoles were recognized around some of the plutons. Several relatively small bodies of granitic rock contain plagioclase grains in which primary oscillatory zoning was unaffected by metamorphism. These were interpreted to be post-metamorphic. We think that there were three separate stages of hydrothermal alteration in the complex volcanic terrane in the area. The oldest, an area of at least 8.5 square miles (22 square kilometers), was subjected to an intense hydrothermal alteration, ranging from peripheral zones of quartz-sericite-paragonite through a patchy marginal zone of pyrophyllite, andalusite, and other high-alumina minerals, to almost totally silicified core zones. The second event resulted in large areas of weak to moderate sericitic and propylitic alteration recognizable only in the Reedy Branch Tuff. The last event was related to post-metamorphic plutons. All of the pyrophyllite-andalusite deposits and perhaps most of the gold and silver mineralization can be related to the first period of hydrothermal alteration. The subsequent metamorphism did not produce significant changes in mineral species in the zones of most intense hydrothermal alteration. Gold- and silver-bearing sulfide minerals in fracture zones along the southeastern margin of the graben may also have been deposited during this earliest alteration stage. No metallic mineralization appears to have occurred during the second event. A group of molybdenum-bearing greisenlike bodies formed during the emplacement of the youngest plutons during the post-metamorphic event. One gold-bearing sulfide zone occurs in the exocontact of one such porphyritic stock.

North Carolina↗

USGS1952

Geology of the area adjacent to the Free Enterprise uranium-silver Mine, Boulder District, Jefferson County, Montana

Uranium minerals.occur in pods associated with cryptocrystalline silica, silver minerals, and scattered sulfide mineral grains in a hydrothermal vein that cuts quartz monzonite and alaskite at the Free Enterprise mine, 2 miles west of Boulder, Mont. The Free Enterprise vein is one of many silicified reef-like structures in this area, most of which trend about N. 60° E. The cryptocrystalline silica zones of the area are lenticular and are bordered by an altered zone where quartz monzonite is the wall rock. No alteration was noticed where alaskite is adjacent to silica zones. No uranium minerals were observed at the surface, but radioactivity anomalies were noted at 57 outcrops. Underground mining has shown that leaching by downward percolating waters has removed most of the uranium from the near-surface part of the Free Enterprise vein and probably has enriched slightly, parts of the vein and the adjacent wall rock from the bottom of the leached zone to the ground-water level. It is possible that other veins that show low to moderate radioactivity at the surface may contain significant concentrations of uranium minerals at relatively shallow depth. The quartz monzonite appears to be a more favorable host rock for the cryptocrystalline silica and associated uranium minerals than the alaskite. The alaskite occurs as vertical_dikes plug-like masses, and as irregularly shaped, gently dipping masses that are believed to have been intruded into open fractures formed during the cooling of the quartz monzonite.

Montana↗

USGS2010

A 15 000-year record of climate change in northern New Mexico, USA, inferred from isotopic and elemental contents of bog sediments

Elemental (C, N, Pb) and isotopic ( δ 13 C, δ 15 N) measurements of cored sediment from a small bog in northern New Mexico reveal changes in climate during the Late Pleistocene and Holocene. Abrupt increases in Pb concentration and δ 13 C values ca. 14 420 cal. YBP indicate significant runoff to the shallow lake that existed at that time. Weathering and transport of local volcanic rocks resulted in the delivery of Pb-bearing minerals to the basin, while a 13 C-enriched terrestrial vegetation source increased the δ 13 C values of the sedimentary material. Wet conditions developed over a 300 a period and lasted for a few hundred years. The Younger Dryas period (ca. 12 700–11 500 cal. YBP) caused a reduction in terrestrial productivity reflected in decreasing C/N values, δ 15 N values consistently greater than 0‰ and low organic content. By contrast, aquatic productivity increased during the second half of this period, evidenced by increasing δ 13 C values at the time of highest abundance of algae. Dry conditions ca. 8 000–6 000 cal. YBP were characterised by low organic carbon content and high Pb concentrations, the latter suggesting enhanced erosion and aeolian transport of volcanic rock. The range in δ 13 C, δ 15 N and C/N values in the sedimentary record fall within the range of modern plants, except during the periods of runoff and drought. The sedimentary record provides evidence of natural climate variability in northern New Mexico, including short- (multi-centennial) and long-(millennial) term episodes during the Late Pleistocene and Holocene.

Journal of Quaternary Science↗

USGS2019

Magmatic-hydrothermal gold mineralization at the Lone Tree Mine, Battle Mountain district, Nevada

The Lone Tree deposit is located in the northern Battle Mountain mining district, Nevada. Prior to mine closure in 2006, Santa Fe Pacific Gold and Newmont produced 4.2 Moz of gold at an average grade of 2.06 g/t at Lone Tree, primarily from the N-S– to NNW-SSE–striking Wayne zone. The ore is located between the Roberts Mountain and Golconda thrusts in siliciclastic rocks of the Ordovician Valmy Formation and in the Pennsylvanian-Permian Battle Mountain and Edna Mountain Formations, and above the Golconda thrust in siliciclastic and carbonate rocks of the Mississippian to Permian Havallah sequence. Ore is also hosted by rhyolitic dikes that were emplaced at 40.95 ± 0.06 Ma based on zircon U-Pb chemical abrasion-thermal ionization mass spectrometry. The gold is associated with sericitic and argillic alteration of the siliciclastic rocks and dikes and with decarbonatization and Fe carbonate alteration of the carbonate-bearing units, as well as in Fe-As sulfide and finegrained quartz alteration of all rock types. Oxidation affects 30 to 45% of the deposit, penetrating into the stratigraphy along numerous steeply dipping north-south, east-west, and north-northeast–south-southwest structures. Gold is positively correlated with Ag, As, Hg, and Sb. The highest Au grades occur in quartz-sulfide ore hosted in siliciclastic and carbonate sedimentary rocks and rhyolitic intrusions. In this ore style, fine-grained quartz and sericite are intergrown with disseminated sulfide minerals (quartz-sericite-pyrite alteration), constituting cores of weakly mineralized pyrite or marcasite, which are surrounded by fuzzy arsenopyrite rims that contain up to ~2,000 ppm Au. Low gold grades occur in late-stage banded pyrite breccias consisting of a finely zoned Au-poor pyrite matrix surrounding jigsaw-fit clasts of quartz-, illite-, barite-, and adularia-altered siliciclastic rock. The timing of main-stage mineralization is bracketed between the emplacement of the dikes and an adularia 40 Ar/ 39 Ar age of 40.14 ± 0.74 Ma. Sericite intergrown with arsenopyrite-rimmed pyrite in phenocrysts of the rhyolite dikes gave δ 18 O values of 1.6 to 9.5‰ and δ D values of –105 to –145‰. For temperatures of 300 ± 100°C, the calculated fluid isotopic compositions are consistent with felsic magmatic water and minor modifications by mixing with meteoric water and exchange with wall rocks. In the silica-sulfide ore, in situ isotopic laser ablation-multicollector-inductively coupled plasma-mass spectrometry (LA-MC-ICP-MS) analyses of pyrite cores yielded δ 34 S values ranging from 3.4 to 7.7‰, with average values of 5.6‰ in the felsic dikes, 4.5‰ in the siliciclastic rocks, and 5.3‰ in the carbonate rocks. These values match conventional pyrite δ 34 S data reported for Eocene porphyry systems elsewhere in the district. Nanoscale secondary ion mass spectrometry analyses show that gold and associated trace elements occur in submicron-scale zones within arsenopyrite rims on pyrite. The average δ 34 S values of the arsenopyrite rims are 5.3 to 6.5‰ heavier than the pyrite cores, indicating cooling and an increasing H 2 S/SO 2 ratio. The highest grades resulted from episodic pulses of a gold-rich fluid that was partly derived from, or exchanged with, the sedimentary host rocks. In situ LA-MC-ICP-MS δ 34 S values for the late-stage banded pyrite breccia become progressively lighter from veinlet margin to center, reaching a low of –32‰. These veinlets indicate a shift from main-stage quartz-sericite-pyrite and intermediate argillic alteration to more neutral pH and oxidizing conditions during late-stage mineralization, indicating either increasing interaction between the fluid and sedimentary sulfur sources in the host-rock package or bacterial sulfate reduction and supergene sulfide precipitation.

Nevada↗

USGS1985

Maps showing mines, prospects, and mineral sites in the Tray Mountain Roadless Area and vicinity, Northern Georgia

The Tray Mountain Roadless Area, a 36,300-acre tract in the Chattahoochee National Forest, northeastern Georgia, lies within the Blue Redge physiographic province. The roadless area is composed of Precambrian(?)-age metamorphic rocks from two tectonic units, the Hayesville thrust sheet and the "Helen belt" (Nelson, 1982) (fig. 1). The Hayesville thrust sheet consists mostly of biotite gneiss and schist, fine-grained biotite-feldspar gneiss, metasandstone, quartzite, and amphibolite; ultramafic bodies, some granitic gneiss, and small pegmatites are also present. The Helen belt contains mostly metagraywacke, metasandstone, quartzite, graphite schist, amphibolite, some ultramafic bodies, and granitic gneiss. Two "gold belts" and an area of mineralization associated with ultramafic rocks are on lands adjacent to the roadless area. Mining within the roadless area has not been extensive, and there is no current mineral activity in the surrounding region.

Georgia↗

USGS2017

A comprehensive survey of faults, breccias, and fractures in and flanking the eastern Española Basin, Rio Grande rift, New Mexico

A comprehensive survey of geologic structures formed in the Earth’s brittle regime in the eastern Española Basin and flank of the Rio Grande rift, New Mexico, reveals a complex and protracted record of multiple tectonic events. Data and analyses from this representative rift flank-basin pair include measurements from 53 individual fault zones and 22 other brittle structures, such as breccia zones, joints, and veins, investigated at a total of just over 100 sites. Structures were examined and compared in poorly lithified Tertiary sediments, as well as in Paleozoic sedimentary and Proterozoic crystalline rocks. Data and analyses include geologic maps; field observations and measurements; orientation, kinematic, and paleostress analyses; statistical examination of fault trace lengths derived from aeromagnetic data; mineralogy and chemistry of host and fault rocks; and investigation of fault versus bolide-impact hypotheses for the origin of enigmatic breccias found in the Proterozoic basement rocks. Fault kinematic and paleostress analyses suggest a record of transitional, and perhaps partitioned, strains from the Laramide orogeny through Rio Grande rifting. Normal faults within Tertiary basin-fill sediments are consistent with more typical WNW-ESE Rio Grande rift extension, perhaps decoupled from bedrock structures due to strength contrasts favoring the formation of new faults in the relatively weak sediments. Analyses of the fault-length data indicate power-law length distributions similar to those reported from many geologic settings globally. Mineralogy and chemistry in Proterozoic fault-related rocks reveal geochemical changes tied to hydrothermal alteration and nearly isochemical transformation of feldspars to clay minerals. In sediments, faulted minerals are characterized by mechanical entrainment with minor secondary chemical changes. Enigmatic breccias in rift-flanking Proterozoic rocks are autoclastic and isochemical with respect to their protoliths and exist near shatter cones believed to be related to a previously reported pre-Pennsylvanian impact event. A weak iridium anomaly is associated with the breccias as well as adjacent protoliths, thus an impact shock wave cannot be ruled out for their origin. Major fault zones along the eastern rift-flank mountain front are discontinuous and unlikely to impede regional groundwater flow into Española Basin aquifers. The breccia bodies are not large enough to constitute aquifers, and no fault- or breccia-related geochemical anomalies were identified as potential contamination sources for ground or surface waters. The results of this work provide a broad picture of structural diversity and tectonic evolution along the eastern flank of the central Rio Grande rift and the adjacent Española Basin representative of the rift as a whole and many rifts worldwide.

New Mexico↗

USGS2017

Wisconsin Glaciation of the Sierra Nevada (79,000-15,000 yr B.P.) as recorded by rock flour in sediments of Owens Lake, California

Chemical analyses of the clay-sized fractions of 564 continuous sediment samples (200-yr resolution) from composite core OL90/92 allow quantification of an abundance of glacial rock flour. Rock flour produced during glacier advances is represented by clay-sized plagioclase, K-feldspar, and biotite in homogeneous internal composition. The abundance of rock flour is deemed proportional to the intensity of glacies advances. Age control for the composite section is provided by combining previously published radiocarbon dates on organics, U/Th dates on ostracode shells, and U/Th dates on saline minerals from nearby Searles Lake correlated to OL92 by pollen. The rock flour record displays three levels of variability: (1) a dominant one of about 20,000 yr related to summer insolation and precipitation; (2) an intermediate one of 3000-5000 yr, perhaps related to North Atlantic Heinrich events; and (3) a minor one of 1000-2000 yr, perhaps related to North Atlantic thermohaline-driven air-temperature variation. ?? 2001 University of Washington.

Quaternary Research↗

USGS2000

Hydrology of the Helena area bedrock, west-central Montana, 1993-98

The Generalized Bedrock Geologic Map of the Helena Area, West-Central Montana (plate 1 in the report) provides an intermediate-scale overview of bedrock in the Helena area. The geologic map has been compiled at a scale of 1:100,000 from the most widely available sources of geologic map information (see index to geologic mapping on pl. 1). That information has been updated by M.W. Reynolds for this report with more recent geologic mapping and field revision of published maps. All well locations and all bedrock units penetrated during drilling have been confirmed on geologic maps at the largest scale available. Source geologic maps are all at scales larger than 1:100,000 scale. Care has been taken to ensure accurate representation of the original geology at the compilation scale. However, positional accuracy of some features might be somewhat diminished at the smaller scale of the base map when compared with the original data source. Also, line thicknesses for contacts and faults necessarily assume a greater width, relative to the real geologic feature, at the scale of the generalized map than on any original map. The map is not intended for large-scale, site-specific detailed planning. Bedrock units throughout the Helena area are generally covered by young surficial deposits such as alluvium, colluvium, glacial debris, or windblown sediment. Thickness of such deposits varies from veneers through which the underlying bedrock is clearly discernible to major thicknesses that conceal all underlying bedrock and structure. Boundaries of major accumulations of surficial deposits are attributed separately from bedrock contacts. These boundaries should not be considered precise at the map scale or at larger scales. Boundaries shown may be less accurate positionally than bedrock contacts and faults because (1) surficial deposits commonly thin to a knife edge; (2) different mappers will interpret the edge differently when drawing a boundary; or (3) the original geologic map maker was concerned principally with bedrock units and structure and thus overlooked, or did not originally map as consistently, some surficial deposits. Veneers of surficial sediment, when saturated, can be local sources of recharge to underlying bedrock. Use of the generalized map to define their distribution does not substitute for site specific mapping of such deposits. Specific knowledge is needed to determine the water-bearing properties of the geologic units at and surrounding a site because the units, including the igneous and metamorphic rocks, have internal differences in stratigraphy, composition, mineralogy and grain size or crystallinity. These differences, together with structural imprints such as faults, folds, and the spacing, orientation, degree of openness of fractures, and extent and type of mineral filling in fractures and faults, all affect the ability of rocks to store and transmit water.

Montana↗

USGS1967

Ground water in the Eola-Amity Hills area, northern Willamette Valley, Oregon

The Eola-Amity Hills area ,comprises about 230 square miles on the west side of the Willamette Valley between Salem and McMinnville, Oreg. The area is largely rural, and agriculture is the principal occupation. Rocks ranging in age from Eocene to Recent underlie the area. The oldest rocks are a sequence more than 5,000 feet thick of marine-deposited shale and siltstone strata, with thin interbeds of sandstone that range in age from Eocene to middle Oligocene. They are widely exposed in and west of the Eola-Amity Hills and underlie younger sedimentary and volcanic rocks throughout the study area. In the Eola-Amity Hills and Red Hills of Dundee, the Columbia River Group, a series of eastward-dipping basaltic lava flows locally of Miocene age, and conformably overlies the marine sedimentary rocks. The Columbia River Group ranges in thickness from less than 1 foot to about 900 feet and has an average thickness of about 200 feet. The formation is exposed in the Eola-Amity Hills and Red Hills of Dundee and, at places, extends to the east beneath younger rocks. Overlying the Columbia River Group and marine sedimentary rocks are nonmarine sedimentary deposits that range in thickness from less than 1 foot, where they lap up (to an altitude of about 200 ft) on the flanks of the higher hills, to several hundred feet along the east margin of the study area. These deposits include the Troutdale Formation of Pliocene age, the Willamette Silt of late Pleistocene age, and alluvium of the Willamette River and its tributaries. The Troutdale Formation and the alluvium of the Willamette River contain the most productive aquifers in the Eola-Amity Hills area. These aquifers, which consist mainly of sand and gravel, generally yield moderate to large quantities of water to properly constructed wells. Basalt of the Columbia River Group yields small to moderate quantities of water to wells, and the marine sedimentary rocks and Willamette Silt generally yield small but adequate quantities of water for domestic and stock supplies. Ground water from the Columbia River Group and nonmarine sedimentary rocks is chemically suitable for irrigation and other uses, as is the water from shallow depths in the marine sedimentary rocks. However, water from depths of more than several hundred feet in the marine sedimentary rocks contains large amounts of chloride and other dissolved mineral constitutents that make it unsuitable for most uses. Samples from three fairly closely spaced wells obtaining water from depth zones of 50 to 77, 191 to 201, and about 2,000 feet contained 172, 1,160, and 26,000 ppm (parts per million) of chloride, respectively. About 6,100 acre-feet of ground water was pumped from wells and withdrawn from springs for various uses during 1964; of this amount about 4,800 acre-feet was used for irrigation. The total volume of ground water withdrawn and put to beneficial use each year is small compared with the amount that discharges naturally by evapotranspiration and through undeveloped seeps and springs. Much of the natural discharge could be intercepted and put to beneficial use by pumping from wells. Major problems affecting the development of ground water in the area include a) uneven areal distribution of permeable rocks, (b) undesirable chemical quality of the ground water locally in the marine sedimentary rocks, and (c) fine sand entering wells that tap the Troutdale Formation and thereby causing loss of well efficiency and costly wear on pumps and water-supply systems.

Water Supply Paper↗