Search USGS⌕ Search

SEARCH · Search USGS

Results for “Data Science in Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85Linked to original sources
USGS2026

Remote compositional analyses of space-weathered lunar maria

Visible-to-shortwave infrared (VSWIR) reflectance spectroscopy has revolutionized our understanding of planetary surface compositions. However, space-weathering processes on airless bodies complicate quantitative compositional analyses. Here, we present a framework to isolate the signatures of space weathering in VSWIR spectra of lunar maria by leveraging radiative transfer modeling under the assumptions that (i) a space-weathered target can be expressed as a mixture of fresh and fully space-weathered components and (ii) remaining signatures can be modeled by including agglutinates as an end-member component. We first validate this approach against laboratory spectra of space-weathered Apollo mare soils of known mineral compositions using a probabilistic Markov Chain Monte Carlo implementation of the Hapke radiative transfer model. Second, we illustrate how this approach can be applied to orbital Moon Mineralogy Mapper data. The proposed space-weathering correction workflow for lunar maria could be expanded to other lunar lithologies and applied to existing and future data sets.

Planetary Science Journal↗
USGS2015

Encapsulating model complexity and landscape-scale analyses of state-and-transition simulation models: an application of ecoinformatics and juniper encroachment in sagebrush steppe ecosystems

State-and-transition simulation modeling relies on knowledge of vegetation composition and structure (states) that describe community conditions, mechanistic feedbacks such as fire that can affect vegetation establishment, and ecological processes that drive community conditions as well as the transitions between these states. However, as the need for modeling larger and more complex landscapes increase, a more advanced awareness of computing resources becomes essential. The objectives of this study include identifying challenges of executing state-and-transition simulation models, identifying common bottlenecks of computing resources, developing a workflow and software that enable parallel processing of Monte Carlo simulations, and identifying the advantages and disadvantages of different computing resources. To address these objectives, this study used the ApexRMS® SyncroSim software and embarrassingly parallel tasks of Monte Carlo simulations on a single multicore computer and on distributed computing systems. The results demonstrated that state-and-transition simulation models scale best in distributed computing environments, such as high-throughput and high-performance computing, because these environments disseminate the workloads across many compute nodes, thereby supporting analysis of larger landscapes, higher spatial resolution vegetation products, and more complex models. Using a case study and five different computing environments, the top result (high-throughput computing versus serial computations) indicated an approximate 96.6% decrease of computing time. With a single, multicore compute node (bottom result), the computing time indicated an 81.8% decrease relative to using serial computations. These results provide insight into the tradeoffs of using different computing resources when research necessitates advanced integration of ecoinformatics incorporating large and complicated data inputs and models. - See more at: http://aimspress.com/aimses/ch/reader/view_abstract.aspx?file_no=Environ2015030&flag=1#sthash.p1XKDtF8.dpuf

AIMS Environmental Science↗
USGS2015

A 2-D process-based model for suspended sediment dynamics: A first step towards ecological modeling

In estuaries suspended sediment concentration (SSC) is one of the most important contributors to turbidity, which influences habitat conditions and ecological functions of the system. Sediment dynamics differs depending on sediment supply and hydrodynamic forcing conditions that vary over space and over time. A robust sediment transport model is a first step in developing a chain of models enabling simulations of contaminants, phytoplankton and habitat conditions. This works aims to determine turbidity levels in the complex-geometry delta of the San Francisco estuary using a process-based approach (Delft3D Flexible Mesh software). Our approach includes a detailed calibration against measured SSC levels, a sensitivity analysis on model parameters and the determination of a yearly sediment budget as well as an assessment of model results in terms of turbidity levels for a single year, water year (WY) 2011. Model results show that our process-based approach is a valuable tool in assessing sediment dynamics and their related ecological parameters over a range of spatial and temporal scales. The model may act as the base model for a chain of ecological models assessing the impact of climate change and management scenarios. Here we present a modeling approach that, with limited data, produces reliable predictions and can be useful for estuaries without a large amount of processes data.

Hydrology and Earth System Sciences↗
USGS1999

Vegetation responses to natural regulation of elk in Rocky Mountain National Park

Little experimental information is available on the relationship between herbivory by native ungulates and vegetation in relatively undisturbed environments. A quasi-experimental situation exists in Rocky Mountain National Park, where elk (Cervus elaphus) populations have increased about 3-fold since 1968, following their release from artificial controls within the park boundaries. We reviewed data collected on vegetation transects established and monitored over the 25-year period from 1968 through 1992. Data were subjected to rigorous statistical analysis to detect trends following the release of elk from artificial controls. Increases in elk habitat use and decreases in deer habitat use were observed on all transects over the 25-year period. Significant increases in moss and lichen cover occurred in three offour vegetation types. Percent cover of bare ground, forbs (particularly Selaginella densa), and Carex spp. increased on grassland transects. Increases in timothy (Phleum pratense) were observed on meadow transects. Graminoid and litter cover increased on sagebrush transects, and shrub and litter cover increased on bitterbrush transects. We concluded the lack of control (fenced) plots in this sampling design, the types ofmeasures, the small number of replicates, and nonrandom placement of plots limit the inferences and sensitivity from the work. Unique strengths ofthe work included the long time period (25 years), good distribution of samples, consistency ofthe observer (D. Stevens), and placement of the plots in the most heavily grazed sites. Some grazing-induced responses were detected. Grazing-resistant species such as sedges (native), timothy (exotic), and club mosses increased and the amount of bare ground increased on some grazed sites. However, the changes within this sampling program alone were not alarming. The amount of bare ground increase was minor (4%), and grass and shrub cover increased in the shrub plots. The inferential power ofthis sample design was limited to the study plots only. Other factors (climate change, succession) were not controlled for using fenced plots and the sensitivity ofthe methods and plots to detect change were limited. For example, the low number oftransects in willow was not adequate to monitor conditions on the entire winter range. Lacking controls, observed changes may have been due to other factors (climate trends, beaver dam abandonment, stream channel changes), not elk herbivory alone. We recommend using a new sampling design that would include controls, pretreatment data, random site selection, and much more replication.

Colorado↗
USGS2022

Fundamental science and engineering questions in planetary cave exploration

Nearly half a century ago, two papers postulated the likelihood of lunar lava tube caves using mathematical models. Today, armed with an array of orbiting and fly-by satellites and survey instrumentation, we have now acquired cave data across our solar system—including the identification of potential cave entrances on the Moon, Mars, and at least six other planetary bodies. These discoveries gave rise to the study of planetary caves. To help advance this field, we leveraged the expertise of an interdisciplinary group to identify a strategy to explore caves beyond Earth. Focusing primarily on astrobiology, the cave environment, geology, robotics, instrumentation, and human exploration, our goal was to produce a framework to guide this subdiscipline through at least the next decade. To do this, we first assembled a list of 198 science and engineering questions. Then, through a series of social surveys, 114 scientists and engineers winnowed down the list to the top 53 highest priority questions. This exercise resulted in identifying emerging and crucial research areas that require robust development to ultimately support a robotic mission to a planetary cave—principally the Moon and/or Mars. With the necessary financial investment and institutional support, the research and technological development required to achieve these necessary advancements over the next decade are attainable. Subsequently, we will be positioned to robotically examine lunar caves and search for evidence of life within martian caves; in turn, this will set the stage for human exploration and potential habitation of both the lunar and martian subsurface.

JGR Planets↗
USGS2004

Application of health-based screening levels to ground-water quality data in a state-scale pilot effort

A state-scale pilot effort was conducted to evaluate a Health-Based Screening Level (HBSL) approach developed for communicating findings from the U.S. Geological Survey (USGS) National Water-Quality Assessment Program in a human-health context. Many aquifers sampled by USGS are used as drinking-water sources, and water-quality conditions historically have been assessed by comparing measured contaminant concentrations to established drinking-water standards and guidelines. Because drinking-water standards and guidelines do not exist for many analyzed contaminants, HBSL values were developed collaboratively by the USGS, U.S. Environmental Protection Agency (USEPA), New Jersey Department of Environmental Protection, and Oregon Health & Science University, using USEPA toxicity values and USEPA Office of Water methodologies. The main objective of this report is to demonstrate the use of HBSL approach as a tool for communicating water-quality data in a human-health context by conducting a retrospective analysis of ground-water quality data from New Jersey. Another important objective is to provide guidance on the use and interpretation of HBSL values and other human-health benchmarks in the analyses of water-quality data in a human-health context. Ground-water samples collected during 1996-98 from 30 public-supply, 82 domestic, and 108 monitoring wells were analyzed for 97 pesticides and 85 volatile organic compounds (VOCs). The occurrence of individual pesticides and VOCs was evaluated in a human-health context by calculating Benchmark Quotients (BQs), defined as ratios of measured concentrations of regulated compounds (that is, compounds with Federal or state drinking-water standards) to Maximum Contaminant Level (MCL) values and ratios of measured concentrations of unregulated compounds to HBSL values. Contaminants were identified as being of potential human-health concern if maximum detected concentrations were within a factor of 10 of the associated MCL or HBSL (that is, maximum BQ value (BQmax) greater than or equal to 0.1) in any well type (public supply, domestic, monitoring). Most (57 of 77) pesticides and VOCs with human-health benchmarks were detected at concentrations well below these levels (BQmax less than 0.1) for all three well types; however, BQmax values ranged from 0.1 to 3,000 for 6 pesticides and 14 VOCs. Of these 20 contaminants, one pesticide (dieldrin) and three VOCs (1,2-dibromoethane, tetrachloroethylene, and trichloroethylene) both (1) were measured at concentrations that met or exceeded MCL or HBSL values, and (2) were detected in more than 10 percent of samples collected from raw ground water used as sources of drinking water (public-supply and (or) domestic wells) and, therefore, are particularly relevant to human health. The occurrence of multiple pesticides and VOCs in individual wells also was evaluated in a human-health context because at least 53 different contaminants were detected in each of the three well types. To assess the relative human-health importance of the occurrence of multiple contaminants in different wells, the BQ values for all contaminants in a given well were summed. The median ratio of the maximum BQ to the sum of all BQ values for each well ranged from 0.83 to 0.93 for all well types, indicating that the maximum BQ makes up the majority of the sum for most wells. Maximum and summed BQ values were statistically greater for individual public-supply wells than for individual domestic and monitoring wells. The HBSL approach is an effective tool for placing water-quality data in a human-health context. For 79 of the 182 compounds analyzed in this study, no USEPA drinking-water standards or guidelines exist, but new HBSL values were calculated for 39 of these 79 compounds. The new HBSL values increased the number of detected pesticides and VOCs with human-health benchmarks from 65 to 77 (of 97 detected compounds), thereby expanding the basis for interpreting contaminant-occu

Scientific Investigations Report↗
USGS2021

A novel automatic phenology learning (APL) method of training sample selection using multiple datasets for time-series land cover mapping

The long record of Landsat imagery, which is the cornerstone of Earth observation, provides an opportunity to monitor land use and land cover (LULC) change and understand the interactions between the climate and earth system through time. A few change detection algorithms such as Continuous Change Detection and Classification (CCDC) have been developed to utilize all available Landsat images for change detection and characterization at local or global scales. However, the reliable, rapid, and reproducible collection of training samples have become a challenge for time series land cover classification at a large scale. To meet the challenge, we proposed an automatic phenology learning (APL) method with the assumption that the temporal profiles of samples within the same land cover type are the same or similar at a local scale to generate evenly distributed training samples automatically. We designed the method to build land cover patterns for each category based on consensus samples derived from multiple existing scientific datasets including LANDFIRE's (LF) Existing Vegetation Type (EVT), USGS National Land Cover Database (NLCD), National Agricultural Statistics Service (NASS) Cropland Data Layer (CDL), and National Wetlands Inventory (NWI). Then we calculated the Time-Weighted Dynamic Time Warping (twDTW) distance between any undefined samples and land cover patterns in the same geographical region as prior knowledge. Finally, we selected the optimal land cover category for each undefined sample from the land cover products based on the designed criteria iteratively using the twDTW distance as an indicator. The method was applied in the footprint of 10 selected Landsat Analysis Ready Data (ARD) tiles in the eastern and western conterminous United States (CONUS) to produce annual land cover maps from 1985 to 2017. The accuracy assessment and visual comparison revealed that the APL method can generate reliable training samples without any manual interpretation, producing better land cover results especially for the grass/shrub and wetland land cover classes. Applying the APL method, the overall accuracy of the annual land cover maps was improved by 2% over the accuracy of Land Change Monitoring, Assessment, and Projection (LCMAP) Collection 1.0 Science Products in the research regions. Our results also indicate that the APL method provides an approach for best use of different land cover products and meets the requirement of intensive sampling for training data collection.

Remote Sensing of Environment↗
USGS2025

System characterization report on Resourcesat-2A Advanced Wide Field Sensor

Executive Summary This report documents the system characterization of the Indian Space Research Organisation Resourcesat-2A Advanced Wide Field Sensor (AWiFS) and is part of a series of system characterization reports produced by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports describe the methodology and procedures used for characterization, present technical and operational information about the specific sensing system being evaluated, and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Resourcesat-2A was launched in 2016 on the Polar Satellite Launch Vehicle-C36; it is identical to Resourcesat-2, and together, they decrease imaging revisit time from 5 days to 2–3 days, providing data continuity and improved temporal resolution. Resourcesat-2 and -2A carry the AWiFS, Linear Imaging Self Scanning-3, and Linear Imaging Self Scanning-4 medium-resolution imaging sensors, continuing the legacy of the Indian Space Research Organisation’s Indian Remote Sensing-1C/1D/P3 satellite programs. More information about Indian Space Research Organisation satellites and sensors is available through the Joint Agency Commercial Imagery Evaluation Earth Observing Satellites Online Compendium and from the Indian Space Research Organisation at https://www.isro.gov.in/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team assessed the geometric, radiometric, and spatial performance of the Resourcesat-2A AWiFS sensor. Geometric performance is divided into the interior geometric performance of band-to-band registration and the exterior geometric performance of geolocation accuracy. The interior geometric performance had offsets in the range of −1.10 meters (m; −0.020 pixel) to 3.67 m (0.066 pixel) in easting and −5.68 m (−0.101 pixel) to 10.38 m (0.185 pixel) in northing with root mean square error values from 5.60 m (0.100 pixel) to 11.31 m (0.202 pixel) in easting and from 3.00 m (0.054 pixel) to 13.52 m (0.241 pixel) in northing. The exterior geometric performance had mean offsets of −25.29 m in easting and 16.22 m northing with root mean square error values of 26.07 m in easting and 17.60 m in northing compared to the Landsat 8 Operational Land Imager sensor. The radiometric performance had offsets from −0.002 to 0.029 and slopes from 0.733 to 1.012. Spatial performance was in the range of 1.354 to 1.639 pixels for full width at half maximum with a modulation transfer function at a Nyquist frequency in the range of 0.108 to 0.174.

Open-File Report↗
USGS2012

Science in support of the Deepwater Horizon response

This introduction to the Special Feature presents the context for science during the Deepwater Horizon oil spill response, summarizes how scientific knowledge was integrated across disciplines and statutory responsibilities, identifies areas where scientific information was accurate and where it was not, and considers lessons learned and recommendations for future research and response. Scientific information was integrated within and across federal and state agencies, with input from nongovernmental scientists, across a diverse portfolio of needs—stopping the flow of oil, estimating the amount of oil, capturing and recovering the oil, tracking and forecasting surface oil, protecting coastal and oceanic wildlife and habitat, managing fisheries, and protecting the safety of seafood. Disciplines involved included atmospheric, oceanographic, biogeochemical, ecological, health, biological, and chemical sciences, physics, geology, and mechanical and chemical engineering. Platforms ranged from satellites and planes to ships, buoys, gliders, and remotely operated vehicles to laboratories and computer simulations. The unprecedented response effort depended directly on intense and extensive scientific and engineering data, information, and advice. Many valuable lessons were learned that should be applied to future events.

Alabama, Florida, Louisiana, Mississippi, Texas↗
USGS2025

System characterization report on Resourcesat-2A Linear Imaging Self Scanning-4 sensor

Executive Summary This report documents the system characterization of the Indian Space Research Organisation Resourcesat-2A Linear Imaging Self Scanning-4 (LISS–4) sensor. It is part of a series of system characterization reports produced by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports describe the methodology and procedures used for characterization, present technical and operational information about the specific sensing system being evaluated, and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Resourcesat-2A was launched in 2016 on the Polar Satellite Launch Vehicle-C36; it is identical to Resourcesat-2, and together, they decrease imaging revisit time from 5 days to 2–3 days, providing data continuity and improved temporal resolution. Resouresat-2 and 2A carry the Advanced Wide Field Sensor, Linear Imaging Self Scanning-3, and LISS–4 medium-resolution imaging sensors, continuing the legacy of the Indian Space Research Organisation’s Indian Remote Sensing-1C/1D/P3 satellite programs. More information about the Indian Space Research Organisation’s satellites and sensors is available through the Joint Agency Commercial Imagery Evaluation Earth Observing Satellites Online Compendium at https://calval.cr.usgs.gov/apps/compendium/ and from the manufacturer at https://www.isro.gov.in/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team assessed the geometric, radiometric, and spatial performances of the Resourcesat-2A LISS–4 sensor. Geometric performance is divided into the interior geometric performance of band-to-band registration and the exterior geometric performance of geolocation accuracy. The interior geometric performance had mean offsets in the range of −0.118 to 0.024 pixel in easting and −0.053 to 0.022 pixel in northing with root mean square error values from 0.067 to 0.230 pixel in easting and from 0.087 to 0.2 pixel in northing. The exterior geometric performance had offsets in the range of 2.55 to 7.85 meters (m) in easting and −6.15 to 11.15 m in northing with root mean square error values in the range of 2.6 to 8.2 m in easting and 6.35 to 11.8 m in northing compared to the U.S. Department of Agriculture National Agriculture Imagery Program and WorldView-3 orthoimages. The measured radiometric performance had offsets from 0.003 to 0.024 and slopes from 0.736 to 0.952, and spatial performance was in the range of 1.633 to 1.903 pixels for the full width at half maximum with a modulation transfer function at a Nyquist frequency in the range of 0.0529 to 0.0952.

Open-File Report↗
USGS2018

Continuing progress toward a national assessment of water availability and use

Executive Summary The Omnibus Public Land Management Act of 2009 (Public Law 111—11) was passed into law on March 30, 2009. Subtitle F, also known as the SECURE Water Act, calls for the establishment of a “national water availability and use assessment program” within the U.S. Geological Survey (USGS). The USGS issued the first report on the program in 2013. Program progress over the period 2013–17 is reported herein to fulfill the requirement to inform Congress on implementation of the national water availability and use assessment program, also referred to as the USGS National Water Census (the Water Census). Much work has been accomplished during 2013–17 on producing water budgets for the nation, a goal USGS outlined in its first report on program progress to Congress. The USGS has completed three geographic focus area studies and has begun three others. Work has advanced on nationwide efforts in streamflow analysis, groundwater assessment and research, evapotranspiration studies, water use, environmental water science, and drought science. The USGS works with Federal and non-Federal agencies, universities, and other organizations to ensure that the information can be aggregated with other types of water-availability and socioeconomic information, such as data on food and energy production. The USGS has also made great strides in measures for delivering data and information on the Water Census to stakeholders and the public. Much work remains to be accomplished for the Nation to have a comprehensive, ongoing Water Census. In this report, the USGS lays out activities to be accomplished in the next 5 years (2017–22), based upon current funding levels. These include selecting new focus area studies, conducting hydrologic modeling to complete water budgets for the conterminous United States, expanding groundwater modeling efforts, mapping a national classification system for environmental water science, and developing an inventory of interbasin water transfers. All of these steps are necessary in order for the Water Census to achieve the goals outlined by Congress in the SECURE Water Act.

Circular↗
USGS2015

Applications of optical sensors for high-frequency water-quality monitoring and research

The recent commercial availability of in-situ optical sensors, together with new techniques for data collection and analysis, provides the opportunity to monitor a wide range of water-quality constituents over time scales during which environmental conditions actually change. Traditional approaches for data collection (daily to monthly discrete samples) are often limited by high sample collection, processing, and analytical costs, difficult site access, and logistical challenges, particularly for long-term sampling at a large number of sites. Optical sensors that continuously measure constituents in the environment by absorbance or fluorescence properties (Figure 1) have had a long history of use in oceanography for measuring highly resolved concentrations and fluxes of organic matter, nutrients, and algal material. However, much of the work using commercially-available optical sensors in rivers and streams has taken place in only the last few years. Figure 1. [NOT SHOWN] Optical sensor technology is now sufficiently developed to warrant broader application for research and monitoring in coastal and freshwater systems, and the United States Geological Survey (a U.S. science agency) is now using these sensors in a variety of research and monitoring programs to better understand water quality in-situ and in real-time. Examples are numerous and range from the applications of nitrate sensors for calculating loads to estuaries susceptible to hypoxia (Pellerin et al., 2014) to the use of fluorometers to estimate methymercury fluxes (Bergamaschi et al., 2011) and disinfection byproduct formation (Carpenter et al., 2013). Transmitting these data in real-time provides information that can be used for early trend detection, help identify monitoring gaps critical for water management, and provide science-based decision support across a range of issues related to water quality, freshwater ecosystems, and human health. Despite the value of these sensors, collecting data that meet high-quality standards requires investment in and adherence to tested and established methods and protocols for sensor operation and data management (Pellerin et al., 2013). For example, optical sensor measurements can be strongly influenced by a variety of matrix effects, including water temperature, inner filtering from highly colored water, and scattering of light by suspended particles (Downing et al., 2012). Characterizing and correcting sensors for these effects – as well as the continued development of common methodologies and protocols for sensor use – will be critical to ensuring comparable measurements across sites and over time. In addition, collaborative efforts such as the Nutrient Sensor Challenge (www.nutrients-challenge.org) will continue to accelerate the development, production and use of affordable, reliable and accurate sensors for a range of environments. REFERENCES Bergamaschi .B.A., Fleck J.A., Downing B.D., Boss E., Pellerin B.A., Ganju N.K., Schoellhamer D.H., Byington A.A., Heim W.A., Stephenson M., Fujii R. (2011), Methyl mercury dynamics in a tidal wetland quantified using in situ optical measurements. Limnology and Oceanography, 56(4): 1355-1371. Carpenter K.D., Kraus T.E.C., Goldman J.H., Saraceno J., Downing B.D., Bergamaschi B.A., McGhee G., Triplett T. (2013), Sources and Characteristics of Organic Matter in the Clackamas River, Oregon, Related to the Formation of Disinfection By-products in Treated Drinking Water: U.S. Geological Survey Scientific Investigations Report 2013–5001, 78 p. Downing .B.D., Pellerin B.A., Bergamaschi B.A., Saraceno J., Kraus T.E.K. (2012), Seeing the light: The effects of particles, temperature and inner filtering on in situ CDOM fluorescence in rivers and streams. Limnology and Oceanography: Methods, 10: 767-775. Pellerin B.A., Bergamaschi B.A., Downing B.D., Saraceno J., Garrett J.D., Olsen L.D. (2013), Optical Techniques for the Determination of Nitrate in En

Conference Paper↗
USGS2012

Water-quality, bed-sediment, and discharge data for the Mississippi River-Gulf Outlet and adjacent waterways, southeastern Louisiana, August 2008 through December 2009

The Mississippi River-Gulf Outlet navigation channel (MRGO) was constructed in the early 1960s to provide a safer and shorter route between the Gulf of Mexico and the Port of New Orleans for deep-draft, ocean-going vessels and to promote the economic development of the Port of New Orleans. In 2006, the U.S. Army Corps of Engineers developed a plan to de-authorize the MRGO. The plan called for a rock barrier to be constructed across the MRGO near Bayou La Loutre. In 2008, the U.S. Geological Survey, in cooperation with the Louisiana Coastal Area Science and Technology Program began a study to document the impacts of the rock barrier on water-quality and flow before, during, and after its construction. Water-quality, bed-sediment, and discharge data were collected in the MRGO and adjacent water bodies from August 2008 through December 2009.

Louisiana↗
USGS2011

Geophysical logging data from the Mills Gap Road area near Asheville, North Carolina

In September 2009, the U.S. Geological Survey (USGS) was requested to assist the Environmental Protection Agency (EPA) Region 4 Superfund Section in the development of a conceptual groundwater flow model in the area of the Mills Gap Road contaminant investigation near Asheville, North Carolina (Site ID A4P5) through an Interagency Grant and work authorization IAD DW number 14946085. The USGS approach included the application of established and state-of-the-science borehole geophysical tools and methods used to delineate and characterize fracture zones in the regolith-fractured bedrock groundwater system. Borehole geophysical logs were collected in eight wells in the Mills Gap Road project area from January through June 2010. These subsurface data were compared to local surface geologic mapping data collected by the North Carolina Geological Survey (NCGS) from January through May 2010.

North Carolina↗
USGS2020

The 150th anniversary of the 1869 Powell expedition—USGS participation in the Sesquicentennial Colorado River Exploring Expedition and reflections from the ~1,000-mile journey down the Green and Colorado Rivers

In 1869, John Wesley Powell completed the first well-recorded scientific river journey to explore an extensive region of the Colorado River Basin. Powell later helped to establish the U.S. Geological Survey (USGS) and served as its second director (1881–94), cementing his position in the folklore of the Survey. In 2019, the USGS marked the 150th anniversary of Powell’s first expedition with a broad-scale educational campaign as an opportunity to highlight current USGS science in the region through the lens of an exciting river expedition, with the goal of inspiring the next generation of USGS scientists. The project included a partnership with the Sesquicentennial Colorado River Exploring Expedition (SCREE), which traveled the length of the original route for ~1,000 river miles from Green River, Wyoming, to Lake Mead, Nevada, including the Grand Canyon. Small, interdisciplinary groups of USGS employees joined each segment of the journey, gathered data to be used for educational purposes, participated in community outreach events, and upon return shared their experiences with their local communities. This report documents a photographic journey of the expedition, personal vignettes from the USGS participants, Science Stories to explain the scope of the experiments, and Then and Now articles (which were published online during the expedition), to explore some of the changes that have occurred since the first expedition.

Arizona, Colorado, Utah, Wyoming↗
USGS2020

Ecological interfaces between land and flowing water: Themes and trends in riparian research and management

This paper provides an overview of past, present and future themes for research and management of riparian zones, often relating to papers within this Wetlands Special Feature. Riparian research expanded in the United States around 1980 with themes that recognized (1) damage from excessive livestock, or (2) damage from river damming and diversion, and (3) the beneficial capacity of riparian buffers to intercept and assimilate nutrients and other water contaminants. Research expanded globally in the 1990s, with themes including (4) plant life history requirements and (5) reliance on fluvial geomorphic dynamics that enable riparian rejuvenation. Resource managers recognized that riparian areas provide (6) rich wildlife habitats (7) along with valued ecosystem services, (8) which encouraged conservation and restoration initiatives, (9) including environmental flow regimes. Floodplains are (10) vulnerable to invasive plants and management has included biocontrol such as for Tamarix in the American Southwest. Into the twenty-first century, (11) climate change is advancing, and riparian ecosystems may be especially impacted due to the compound challenges from increasing water demand and declining summer flows. As an emerging opportunity, (12) while reservoirs submerge floodplain vegetation, reservoir deltas may support compensatory riparian wetlands. (13) Studies increasingly utilize remote sensing tools including satellite imagery, LiDAR and unmanned aircraft systems, and (14) the coordination of large data sets invites digital ecology, including artificial intelligence and machine learning. Since riparian zones are centres for human activities, (15) there are opportunities for citizen science, social media and internet applications, which will increasingly democratize riparian research and management.

Wetlands↗
USGS2014

Geologic implications of gas hydrates in the offshore of India: results of the National Gas Hydrate Program Expedition 01

The Indian National Gas Hydrate Program Expedition 01 (NGHP-01) is designed to study the occurrence of gas hydrate along the passive continental margin of the Indian Peninsula and in the Andaman convergent margin, with special emphasis on understanding the geologic and geochemical controls on the occurrence of gas hydrate in these two diverse settings. The NGHP-01 expedition established the presence of gas hydrates in the Krishna-Godavari and Mahanadi Basins, and the Andaman Sea. The expedition discovered in the Krishna-Godavari Basin one of the thickest gas hydrate accumulations ever documented, in the Andaman Sea one of the thickest and deepest gas hydrate stability zones in the world, and established the existence of a fully developed gas hydrate petroleum system in all three basins. The primary goal of NGHP-01 was to conduct scientific ocean drilling/coring, logging, and analytical activities to assess the geologic occurrence, regional context, and characteristics of gas hydrate deposits along the continental margins of India. This was done in order to meet the long-term goal of exploiting gas hydrate as a potential energy resource in a cost effective and safe manner. During its 113.5-day voyage, the D/V JOIDES Resolution cored and/or drilled 39 holes at 21 sites (1 site in Kerala-Konkan, 15 sites in Krishna-Godavari, 4 sites in Mahanadi, and 1 site in the Andaman deep offshore area), penetrated more than 9250 m of sedimentary section, and recovered nearly 2850 m of core. Twelve holes were logged with logging-while-drilling (LWD) tools and an additional 13 holes were wireline logged. The science team utilized extensive on-board laboratory facilities to examine and prepare preliminary reports on the physical properties, geochemistry, and sedimentology of all the data collected prior to the end of the expedition. Samples were also analyzed in additional post-expedition shore-based studies conducted in leading laboratories around the world. One of the specific objectives of this expedition was to test gas hydrate formation models and constrain model parameters, especially those that account for the formation of concentrated gas hydrate accumulations. The necessary data for characterizing the occurrence of in situ gas hydrate, such as interstitial water chlorinities, core-derived gas chemistry, physical and sedimentological properties, thermal images of the recovered cores, and downhole measured logging data (LWD and/or conventional wireline log data), were obtained from most of the drill sites established during NGHP-01. Almost all of the drill sites yielded evidence for the occurrence of gas hydrate; however, the inferred in situ concentration of gas hydrate varied substantially from site to site. For the most part, the interpretation of downhole logging data, core thermal images, interstitial water analyses, and pressure core images from the sites drilled during NGHP-01 indicate that the occurrence of concentrated gas hydrate is mostly associated with the presence of fractures in the sediments, and in some limited cases, by coarser grained (mostly sand-rich) sediments.

Marine and Petroleum Geology↗
USGS2002

Lag times of bank filtration at a well field, Cincinnati, Ohio, USA

Wells placed next to surface-water bodies to induce infiltration have come under scrutiny because of the presence of the potential pathogens in surface water. Removal of pathogens and other contaminants by bank filtration is assumed, but regulatory agencies question the effectiveness of this process. To investigate transport processes of biological constituents, advective groundwater traveltimes to production wells under the influence of surface water need to be established first to determine appropriate water-quality sampling schedules. This paper presents the results of a study of bank filtration at a well field in southwestern Ohio. Field parameters such as water level, specific conductance, and water temperature were measured at least hourly at a streamflow gaging station and at five monitoring wells each at two separate sites, corresponding to two nearby production wells. Water-quality samples also were collected in all wells and the streamflow gaging station. Specific conductance is directly related to concentration of chloride, a chemically conservative constituent. Cross-correlation methods were used to determine the average traveltime from the river to the monitoring wells. Traveltimes based on specific conductance ranged from approximately 20 h to 10 days at one site and 5 days to 3 months at the other site. Calculated groundwater flow velocities ranged from 2.1 ?? 10-3 to 6.0 ?? 10-3 cm/s and 3.5 ?? 10-4 to 7.1 ?? 10-4 cm/s at the two sites. Data collected when a production well is continuously pumping reveal shorter and more consistent traveltimes than when the same well is pumped intermittently. ?? 2002 Elsevier Science B.V. All rights reserved.

Journal of Hydrology↗