Search USGS⌕ Search

SEARCH · Search USGS

Results for “Sensors”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82Linked to original sources

Measured and calculated nitrate and dissolved organic carbon concentrations and loads at the W.P. Franklin Lock and Dam, S-79, south Florida, 2014-17

The U.S. Geological Survey monitored dissolved nitrate plus nitrite as nitrogen (N) and dissolved organic carbon (DOC) concentrations and calculated loads of these constituents at the W.P. Franklin Lock and Dam (S-79) from April 2014 to December 2017. Flows from Lake Okeechobee controlled by S-77, S-78 and S-79 affect water quality in the downstream Caloosahatchee River Estuary, where increased nutrients and dissolved organic matter are of concern. Numerous algal blooms have occurred in the Caloosahatchee River and downstream estuaries in recent years (2005–18) and are often attributed to eutrophication. Dissolved nitrate plus nitrite as N (hereafter, referred to as nitrate) data were collected at 15-minute intervals using a submersible ultraviolet optical nitrate sensor. The instrument data were corrected for interferences, as determined by the relation between instrument measurements and 20 concurrent laboratory values. A surrogate model, based on 36 concurrent measurements of DOC, fluorescence of chromophoric dissolved organic matter, and specific conductance, was developed to calculate DOC at 15-minute intervals. Mean and median calculated nitrate concentrations for the study period (2014–17) were both 0.21 milligram per liter (mg/L). Monthly mean nitrate concentrations ranged from 0.04 mg/L in April 2017 to 0.48 mg/L in November 2015. Monthly mean nitrate concentrations and the proportion of water that was attributed to Lake Okeechobee discharge, released through S-79, were weakly correlated and indicate that the nitrate concentrations typically decreased as the percentage of water released from the lake increased. Annual nitrate loads were 278 metric tons in 2015, 782 metric tons in 2016, and 525 metric tons in 2017. Monthly mean nitrate loads ranged from 1.2 metric tons in April 2017 to 171.3 metric tons in February 2016. Nitrate loads increased linearly with an increase in flow and typically increased during the wet season, May to October. Monthly loads of nitrate were strongly correlated with flow at S-77 and S-79. Mean and median calculated DOC concentrations for the study period were 18.3 mg/L and 18.9 mg/L, respectively. Monthly mean DOC concentrations ranged from 12.6 mg/L in May 2017 to 21.5 mg/L in September 2015. Generally, DOC concentrations were lower during the dry season months (November to April) and higher during the wet season months. Monthly mean DOC concentrations were moderately correlated with monthly mean flow volumes at S-79. There was a strong correlation between monthly mean DOC concentrations and the proportion of water released at S-79 that can be attributed directly to Lake Okeechobee, indicating that contributions between Moore Haven Lock and Dam (S-77) and S-79 have a higher DOC concentration than water released from Lake Okeechobee. Monthly mean nitrate concentrations and monthly mean DOC concentrations were strongly correlated. Annual loads of DOC were 23,960 metric tons in 2015 and 65,610 metric tons in 2016 (2014 and 2017 data were incomplete). Monthly loads of DOC ranged from 284 metric tons in May 2017 to 15,122 metric tons in September 2017, the latter corresponding to the effects from Hurricane Irma. Monthly loads of DOC were strongly correlated with flow at S-77 and S-79.

Florida↗

Linear regression model documentation and updates for computing water-quality constituent concentrations or densities using continuous real-time water-quality data for the Kansas River, Kansas, July 2012 through September 2019

The Kansas River provides drinking water to about 800,000 people in northeastern Kansas. Water-treatment facilities that use the Kansas River as a water-supply source use chemical and physical processes during water treatment to remove contaminants before public distribution. Advanced notification of changing water-quality conditions near water-supply intakes allows water-treatment facilities to proactively adjust treatment. The U.S. Geological Survey (USGS), in cooperation with the Kansas Water Office (funded in part through the Kansas Water Plan), the Kansas Department of Health and Environment, The Nature Conservancy, the City of Lawrence, the City of Manhattan, the City of Olathe, the City of Topeka, and Johnson County WaterOne, collected water-quality data at the Kansas River at Wamego (USGS site 06887500; hereafter referred to as the “Wamego site”) and De Soto (USGS site 06892350; hereafter referred to as the “De Soto site”) monitoring sites to update previously published regression models relating continuous water-quality sensor measurements, streamflow, and seasonal components to discretely sampled water-quality constituent concentrations or densities. Linear regression analysis was used to update and develop models for total dissolved solids, major ions, hardness as calcium carbonate, nutrients (nitrogen and phosphorus species), chlorophyll a , total suspended solids, suspended sediment, and fecal indicator bacteria at the Wamego and De Soto monitoring sites using data collected during July 2012 through September 2019. The water-quality information documented in this report can be used as guidance for water-treatment processes and to characterize changes in water-quality conditions in the Kansas River over time that would not be otherwise possible.

Kansas↗

System characterization report on the Gaofen-1

Executive Summary This report addresses system characterization of Gaofen-1 and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence in 2020. These reports present the detail methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Gaofen represents a series of Chinese high-resolution Earth observation satellites. More than 12 satellites have been launched in the Gaofen series, beginning with Gaofen-1 in 2013. Satellites within the series have varying infrared, radar, and optical imaging capabilities. The primary goal for the satellite is to provide near real-time observations for climate change monitoring, geographical mapping, precision agriculture support, environmental and resource surveying, and disaster prevention. More information on Chinese satellites and sensors is available within the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and at http://www.cnsageo.com/#/detailIndex?secondIndex=2&id=3&code=8 . The Earth Resources Observation and Science Cal/Val Center of Excellence System Characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that Gaofen-1 has an interior geometric performance of −0.48 meter (m) (−0.03 pixel) northing and 0.42 m (0.03 pixel) easting offset for band 1, −0.99 m (−0.06 pixel) northing and −0.38 m (−0.02 pixel) easting offset for band 2, −0.45 m (−0.03) northing and 0.83 m (0.05 pixel) easting offset for band 3, −3.20 m (−0.20 pixel) northing and 1.44 m (0.09 pixel) easting offset for band 4 in band-to-band registration. Similarly, Gaofen-1 has an exterior geometric performance of 7.50 m (0.48 pixel) easting and 109.50 m (7.30 pixels) northing offset in comparison to the Landsat 8 Operational Land Imager; a radiometric performance in the range of −0.014 to 0.149 (absolute reflective difference); and a spatial performance in the range of 1.1 to 2.0 pixels at full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.040 to 0.250.

Open-File Report↗

System characterization report on Planet’s Dove Classic

Executive Summary This report addresses system characterization of Planet’s Dove Classic satellites and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Since 2013, Planet has launched more than 360 Dove 3U CubeSats, where U stands for 10-centimeter (cm) x 10-cm x 10-cm stowed dimensions, each weighing about 5 kilograms. Since 2015, all Dove satellites have had four-band imagers with about a 4-meter (m) pixel ground sample distance. Since 2016, all Doves have been launched into Sun-synchronous orbits varying from 474 to 524 kilometers, with inclinations between 97 and 98 degrees. The Dove series satellites do not have orbit maintenance capabilities; thus, their orbits decay slowly over time, contributing to shorter lifetimes of about 3 years. More information on Planet satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.planet.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that Dove Classic has an interior geometric performance in the range of −0.218 (−0.073 pixel) to −0.037 m (−0.012 pixel) in easting and −0.167 (−0.056 pixel) to −0.111 m (−0.037 pixel) in northing in band-to-band registration, an exterior geometric error of −6.841 (−2.280 pixels) in easting and −6.235 m (−2.078 pixels) in northing offset in comparison to Landsat 8 Operational Land Imager, a radiometric performance in the range of −0.057 to −0.010 in offset and 0.963 to 1.298 in slope, and a spatial performance in the range of 2.77 to 3.35 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.003 to 0.010.

Open-File Report↗

System characterization report on Planet’s Dove-R

Executive Summary This report addresses system characterization of Planet’s Dove-R and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Since 2013, Planet has launched more than 360 Dove 3U CubeSats, where U stands for 10-centimeter (cm) x 10-cm x 10-cm stowed dimensions, each weighing about 5 kilograms. Since 2015, all Dove satellites have had four-band imagers with about a 4-meter (m) pixel ground sample distance. Since 2016, all Doves have been launched into Sun-synchronous orbits varying from 474 to 524 kilometers, with inclinations between 97 and 98 degrees. The Dove series satellites do not have orbit maintenance capabilities; thus, their orbits decay slowly over time, contributing to shorter lifetimes of about 3 years. More information on Planet satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.planet.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that Dove-R has an interior geometric performance in the range of −0.306 (−0.102 pixel) to 0.286 m (0.095 pixel) in easting and 0.090 (0.030 pixel) to 1.084 m (0.361 pixel) in northing in band-to-band registration, an exterior geometric performance of −5.10 m (−0.51 pixel) in easting and 3.30 m (0.33 pixel) in northing offset in comparison to Sentinel-2, a radiometric performance in the range of −0.023 to −0.008 in offset and 0.948 to 1.077 in slope, and a spatial performance in the range of 2.96 to 3.15 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.001 to 0.003.

Open-File Report↗

System characterization report on Planet SkySat

This report addresses system characterization of Planet’s SkySat and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. SkySat is a constellation of submeter resolution Earth observation satellites providing analytics services, high-definition video, and imagery. The goal for the constellation is to capture multiple daily repeats of high-resolution imagery over any spot on the Earth. As of September 2020, 21 SkySat satellites have been launched, and the first launch occurred in November 2013. More information on Planet satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.planet.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that SkySat has an interior geometric performance in the range of a 0.38- (0.47 pixel) to 0.75-meter (m; 0.93 pixel) root mean square error in easting and a 0.27- (0.33 pixel) to 0.55-m (0.68 pixel) root mean square error in northing, in band-to-band registration; an exterior geometric performance in the range of 0.26 (0.32 pixel) to 1.04 m (1.28 pixels) offset in comparison to ground control points; a radiometric performance in the range of 0.033 to 0.797 (linear regression); and a spatial performance in the range of 3.7 to 4.3 pixels at full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.004 to 0.009.

Open-File Report↗

System characterization report on Planet’s SuperDove

Executive Summary This report addresses system characterization of Planet’s SuperDove and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Since 2013, Planet has launched more than 360 Dove 3U CubeSats, where U stands for 10-centimeter (cm) x 10-cm x 10-cm stowed dimensions, each weighing about 5.8 kilograms. Since 2015, all Dove satellites have had four-band imagers with about a 3-meter (m) pixel ground sample distance. Since 2016, all Doves have been launched into Sun-synchronous orbits varying from 474 to 524 kilometers, with inclinations between 97 and 98 degrees. The Dove series satellites do not have orbit maintenance capabilities; thus, their orbits decay slowly over time, contributing to shorter lifetimes of about 3 years. More information on Planet satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.planet.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that SuperDove has a band-to-band geometric performance in the range of −1.701 m (−0.567 pixel) to 1.173 m (0.391 pixel) in easting and −4.950 m (−1.650 pixels) to 6.051 m (2.017 pixels) in northing, an image-to-image geometric performance of −1.17 m (−0.39 pixel) to 23.45 m (7.82 pixels) in easting and −10.61 m (−3.54 pixels) to −4.43 m (−1.48 pixels) in northing offset in comparison to Sentinel-2, a radiometric performance in the range of −0.043 to 0.020 in offset and 0.812 to 1.246 in slope, and a spatial performance in the range of 3.59 to 3.70 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.005 to 0.008.

Open-File Report↗

System characterization report on the Gaofen-6

Executive Summary Gaofen-6 represents a series of Chinese high-resolution Earth observation satellites. More than 12 satellites have been launched in the Gaofen series, beginning with Gaofen-1 in 2013. Satellites within the series have varying infrared, radar, and optical imaging capabilities. The primary goal for the satellites in this series is to provide near real-time observations for climate change monitoring, geographical mapping, precision agriculture support, environmental and resource surveying, and disaster prevention. More information on Chinese satellites and sensors is available in the “2022 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium.” The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances of Gaofen-6. Results of these analyses indicate that Gaofen-6 has an interior geometric performance root mean square error ranging from 2.84 meters (m; 0.18 pixel) to 7.42 m (0.46 pixel) in easting and from 2.84 m (0.18 pixel) to 11.57 m (0.72 pixel) in northing in band-to-band registration, an exterior geometric performance root mean square error ranging from 154.50 m (8.80 pixels) in easting to 14.65 m (0.80 pixel) in northing in comparison to a corresponding Sentinel-2 scene, a radiometric performance ranging from 0.018 to 0.055 (in offset) and from 0.620 to 0.858 (in slope), and a spatial performance ranging from 2.10 to 2.30 pixels at full width at half maximum, with a modulation transfer function at a Nyquist frequency ranging from 0.040 to 0.055.

Open-File Report↗

System characterization report on Vision-1

Executive Summary This report addresses system characterization of the Airbus Vision-1 satellite and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Vision-1 is a high-resolution Earth observation satellite launched in September 2018 as a collaborative effort between Airbus and Surrey Satellite Technology Ltd. It features a Newtonian telescope with a refractive relay, capturing images in panchromatic and multispectral bands. Operating in a Sun-synchronous orbit at an altitude of 583 kilometers, Vision-1 ensures consistent illumination conditions during image acquisition. It has a revisit time of 1 to 8 days depending on latitude and viewing angle, and it features an off-pointing agility of plus or minus 45 degrees, allowing for multiple target captures in a single pass using spot, strip, and mosaic imaging modes. The panchromatic band offers a resolution of 0.87 meter (m), whereas the multispectral bands (blue, green, red, and near infrared) provide a resolution of 3.48 m. These capabilities support a variety of applications including urban planning, agricultural monitoring, land classification, natural resource management, and disaster response. More information on the Vision-1 satellite and sensors is available in the “2022 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium.” The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that the Vision-1 satellite has an interior geometric performance in the range of 0 to 0.02 m in easting and −0.01 to 0.03 m in northing in band-to-band registration, an exterior geometric performance of 1.7 to 2.2 m in easting and −1.1 to −0.7 m in northing offset with a 90-percent circular error of 3.4 to 3.7 m, a radiometric performance in the range of −0.029 to 0.017 in offset and 0.884 to 0.984 in slope, and a spatial performance in the range of 0.992 to 1.092 pixels for multispectral full width at half maximum and 1.895 pixels for the panchromatic band full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.29 to 0.36 for the multispectral bands and 0.05 for the panchromatic band.

Open-File Report↗

U.S. Geological Survey Great Lakes Science Forum—Summary of remaining data and science needs and next steps

A U.S. Geological Survey-led assessment of data gaps and science needs across the Great Lakes ecosystem indicated the following: • Expanded data collection or monitoring would provide basic ecosystem, social, and public health data to manage the Great Lakes system and to develop and test models and decision support tools. • New science and advanced technologies (for example, sensors and high-performance computing capability) would improve the understanding of critical threats, such as harmful algae blooms and high-water levels. Although there is significant scientific knowledge in specific areas or for specific topics, managers could use improved models and decision support tools, strengthened by extensive data collection and developed at multiple scales, to better inform decision making in the future. Enhanced coordination of agency efforts and associated data collection across data types (for example, prey fish populations and water levels) is needed to effectively manage the Great Lakes. This report highlights the data gaps; benefits of better, more structured coordination; and areas of concern specifically related to data collection/measurement and science efforts. It summarizes and analyzes stakeholder feedback and information from review of scientific literature. Finally, the report outlines steps necessary to create an integrated Great Lakes science plan.

Open-File Report↗

ECCOE Landsat quarterly Calibration and Validation report — Quarter 2, 2021

Executive Summary The U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 7–8 for quarter 2 (April–June), 2021. All data used to compile the Cal/Val analysis results presented in this report are freely available from the USGS EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the Cal/Val Team continued to closely monitor this quarter was the Landsat 8 Thermal Infrared Sensor (TIRS) response degradation, which has been observed since the two November 2020 safehold events. Detailed analysis results characterizing this degradation have been included in this report. Additional information about the safehold events is here: https://www.usgs.gov/core-science-systems/nli/landsat/november-19-2020-landsat-8-data-availability-update-recent-safehold .

Open-File Report↗

ECCOE Landsat quarterly Calibration and Validation report—Quarter 3, 2021

Executive Summary The U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 7–8 for quarter 3 (July–September), 2021. All data used to compile the Cal/Val analysis results presented in this report are freely available from the USGS EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the Cal/Val Team continued to closely monitor this quarter was the Landsat 8 Thermal Infrared Sensor (TIRS) response degradation, which has been observed since the two November 2020 safehold events. Detailed analysis results characterizing this degradation have been included in this report. Additional information about the safehold events is here: https://www.usgs.gov/core-science-systems/nli/landsat/november-19-2020-landsat-8-data-availability-update-recent-safehold .

Open-File Report↗

ECCOE Landsat Quarterly Calibration and Validation report— Quarter 4, 2021

Executive Summary The U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 7–8 for quarter 4 (October–December), 2021. All data used to compile the Cal/Val analysis results presented in this report are freely available from the USGS EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the Cal/Val Team continued to closely monitor this quarter was the Landsat 8 Thermal Infrared Sensor (TIRS) response degradation, which has been observed since the two November 2020 safehold events. Detailed analysis results characterizing this degradation have been included in this report. Additional information about the safehold events is here: https://www.usgs.gov/core-science-systems/nli/landsat/november-19-2020-landsat-8-data-availability-update-recent-safehold .

Open-File Report↗

ECCOE Landsat Quarterly Calibration and Validation report—Quarter 1, 2022

Executive Summary The U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 7–8 for quarter 1 (January–March), 2022. All data used to compile the Cal/Val analysis results presented in this report are freely available from the USGS EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the Cal/Val Team continued to closely monitor this quarter was the Landsat 8 Thermal Infrared Sensor (TIRS) response degradation, which has been observed since the two November 2020 safehold events. Detailed analysis results characterizing this degradation have been included in this report. Additional information about the safehold events is here: https://www.usgs.gov/core-science-systems/nli/landsat/november-19-2020-landsat-8-data-availability-update-recent-safehold .

Open-File Report↗

ECCOE Landsat Quarterly Calibration and Validation report—Quarter 2, 2022

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 7–8 for quarter 2 (April–June), 2022. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was the lowering of the Landsat 7 orbit. On April 6, 2022, the Landsat 7 Enhanced Thematic Mapper Plus (ETM+) sensor was placed into standby mode, and a series of spacecraft burns was completed throughout the month of April to lower the satellite’s orbit by 8 kilometers. Imaging resumed at the lower orbit of 697 kilometers on May 5, 2022, extending the science mission to allow for essential data to be acquired during the 2022 Northern Hemisphere fire and growing season. Additional information about the Landsat 7 orbit lowering is here: https://www.usgs.gov/centers/eros/news/landsat-7-lowered-standard-landsat-orbit#:~:text=The%20satellite's%20primary%20science%20mission%20has%20ended&text=On%20April%206%2C%202022%2C%20the,satellite's%20orbit%20by%208%20kilometers .

Open-File Report↗

Improving temporal frequency of Landsat surface temperature products using the gap-filling algorithm

Remotely sensed surface temperature (ST) has been widely used to monitor and assess landscape thermal conditions, hydrologic modeling, and surface energy balance. Landsat thermal sensors have continuously measured the Earth surface thermal radiance since August 1982. The thermal radiance measurements are atmospherically compensated and converted to Landsat STs and delivered as part of the U.S. Geological Survey Landsat Collection 1 U.S. Analysis Ready Data; however, the low satellite revisit cycles combined with the presence of clouds and cloud shadows reduce the number of valid retrievals. This reduction can limit the ability to monitor annual or seasonal variations in the surface thermal budget. These factors reduce the ability to use the temperature data to fit time series for historical trend analysis to match background climate variations. In this study, we implemented an approach that uses linear harmonic least absolute shrinkage and selection operator regression models to fill gaps because of clouds, shadows, and coarse temporal resolution. The gap-filled data provide increased temporal density of Landsat ST records. The gap-filled Landsat ST, therefore, can allow for an improved monitoring of annual, seasonal, or even monthly landscape thermal conditions.

Georgia↗

ECCOE Landsat quarterly Calibration and Validation report—Quarter 3, 2022

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 7–8 for quarter 3 (July–September) of 2022. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was the lowering of the Landsat 7 orbit. On April 6, 2022, the Landsat 7 Enhanced Thematic Mapper Plus (ETM+) sensor was placed into standby mode, and a series of spacecraft burns was completed through the month of April to lower the satellite’s orbit by 8 kilometers. Imaging resumed at a lower orbit of 697 kilometers on May 5, 2022, extending the science mission to allow for essential data acquisition during the 2022 Northern Hemisphere fire and growing season. Additional information about the Landsat 7 orbit lowering is here: https://www.usgs.gov/centers/eros/news/landsat-7-lowered-standard-landsat-orbit#:~:text=The%20satellite's%20primary%20science%20mission%20has%20ended&text=On%20April%206%2C%202022%2C%20the,satellite's%20orbit%20by%208%20kilometers .

Open-File Report↗

ECCOE Landsat quarterly Calibration and Validation report—Quarter 4, 2022

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 7–8 for quarter 4 (October–December) of 2022. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was the lowering of the Landsat 7 orbit. On April 6, 2022, the Landsat 7 Enhanced Thematic Mapper Plus (ETM+) sensor was placed into standby mode, and a series of spacecraft burns was completed through the month of April to lower the satellite’s orbit by 8 kilometers. Imaging resumed at a lower orbit of 697 kilometers on May 5, 2022, extending the science mission. Additional information about the Landsat 7 orbit lowering is here: https://www.usgs.gov/centers/eros/news/landsat-7-lowered-standard-landsat-orbit#:~:text=The%20satellite's%20primary%20science%20mission%20has%20ended&text=On%20April%206%2C%202022%2C%20the,satellite's%20orbit%20by%208%20kilometers .

Open-File Report↗