Search USGS⌕ Search

SEARCH · Search USGS

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82Linked to original sources

Reconnaissance study of the strontium isotopic composition of Cenozoic volcanic rocks in the northwestern Great Basin

Sixteen mafic and intermediate lava flows of Eocene to Pleistocene age from the northwestern Great Basin have initial Sr 87 /Sr 86 ratios of from 0.7029 to 0.7047. Seven upper Miocene mafic and intermediate lava flows have initial ratios of from 0.7037 to 0.7041, suggesting a common source for the Steens Basalt and contemporaneous rocks of the northwestern Great Basin. Values of 0.7047 and 0.7033 obtained on olivine basalts of early Miocene and Quaternary ages, respectively, suggest that these lavas were derived from different source materials than were the late Miocene rocks. Unusually low values of 0.7029 obtained on two specimens of andesite from the Eocene Cedarville Series of Russell (1928) suggest that these lava flows were derived from still another source material. Ten silicic volcanic rocks, most from widespread and voluminous ash-flow sheets and lava complexes, have initial ratios of approximately 0.7023 to 0.7057. Some of the more radiogenic values, obtained on very highly differentiated and strontium-poor rock units, provide only an upper limit for the initial Sr 87 /Sr 86 ratios of the parent magmas. The close similiarity of the strontium isotopic composition of the silicic rocks to those of spatially and temporally associated intermediate lavas supports the concept that the widespread Miocene silicic volcanic rocks of the northwestern Great Basin were produced by the fractional crystallization of enormous volumes of mantle-derived mafic magma. The data also provide indirect support for the interpretation that the relatively radiogenic character of many salic volcanic rocks from other parts of the Great Basin largely reflects the presence of an unusually radiogenic mantle rather than the involvement of crustal material.

California, Idaho, Nevada, Oregon↗

Structure and development of the continental margin of British Honduras

The continental margin of British Honduras is characterized by elongate ridges that are sub-parallel with the coast and that diverge slightly northward. Each ridge apparently is formed by aligned fault blocks composed of continental basement rock that rotated and subsided during rifting of the margin. The western part of the Cayman Ridge may be underlain by similar rock that extends southwestward into the margin. Little sediment has been trapped in the basins between the ridges, presumably as a result of long-term, low rates of sedimentation. A canyon system that is controlled by both fault-block ridges and cross faults transects the margin and opens into the Yucatan Basin. Deep-sea sediments are characterized by a succession of pelagic deposits above acoustic basement rocks; these deposits are covered by turbidites that have formed deep-sea fan deposits in some places. The change from pelagic to turbidite deposition may have occurred at the end of Cretaceous time when regional uplift provided a source for clastic materials. The principal channel for transport of sediment to the deep sea is believed to be a graben that extends northeastward from the southwest corner of the Gulf of Honduras. Development of the margin may have begun in Late Jurassic time when sphenochasmic rifting created the ancestral Gulf of Honduras. Near the end of Cretaceous time, a new set of motions began, with the Caribbean plate moving relatively eastward and slightly away from the North American plate. This new motion resulted in continued movement of basement blocks through Tertiary and Quaternary time. Although this margin is not young, it has a geomorphically youthful aspect in that the sedimentary sequences do not obscure the rift structures.

British Honduras, Caribbean Sea, Gulf of Honduras↗

Leg 67: the Deep Sea Drilling Project Mid-America Trench transect off Guatemala.

Drilling on the Cocos plate recovered a basal chalk sequence deposited during early and mid-Miocene time, a short interval of abyssal red clay, and an upper sequence of late Miocene and younger sediment deposited within an area influenced by a terrigenous source. In the trench, a mud and sand fill less than 400,000 yr old overlies the oceanic sequence. The entire section shows no evidence of compressive deformation. In contrast, the section cored on the trench's landward slope 3 km from the trench axis is affected by tectonism. The section contains a Cretaceous to Pliocene claystone sequence capped by Pliocene to Quaternary hemipelagic slope deposits.- from Authors

Geological Society of America Bulletin↗

Sedimentary framework of the Potomac River estuary, Maryland

Analyses of seismic-reflection profiles, sediment cores, grab samples, and side-scan sonar records, along with previously collected borehole data, reveal the characteristics, distribution, and geologic history of the shallow strata beneath the Potomac River estuary. The lowermost strata are sediments of the Chesapeake Group (lower Miocene to lower Pleistocene) that crop out on land near the shore but are buried as much as 40 m below the floor of the estuary. The top of these sediments is an erosional unconformity that outlines the Wisconsinan valley of the Potomac River. This valley has a sinuous trend, a flat bottom, a relief of 15 to 34 m, and axial depths of 34 to 54 m below present sea level. During the Holocene transgression of sea level, the ancestral valley was filled with as much as 40 m of sandy and silty, fluvial-to-shallow estuarine sediments. The fill became the substrate for oyster bars in the upper reach and now forms most marginal slopes of the estuary. Since sea level approached its present position (2,000 to 3,000 yr ago), the main channel has become the locus of deposition for watery, gray to black clay or silty clay, and waves and currents have eroded the heterogeneous Quaternary sediments along the margins, leaving winnowed brown sand on shallow shoreline flats. Pb-210 analyses indicate that modern mud is accumulating at rates ranging from 0.16 to 1.80 cm/yr, being lowest near the mouth and increasing toward the head of the estuary. This trend reflects an increased accumulation of fine-grained fluvial sediments near the turbidity maximum, similar to that found in nearby Chesapeake Bay. The present annual accumulation of mud is about 1.54 million metric tons; the cumulative mass is 406 million metric tons.

Maryl↗

The Loma Seca tuff and the Calabozos caldera: a major ash-flow and caldera complex in the southern Andes of central Chile

A 26 × 14-km composite ring-structure caldera of late Pleistocene age has been discovered and mapped near the Andean crest in central Chile (35°30′S). Rhyodacitic to dacitic zoned ash-flow sheets, each representing 150 to 300 km 3 of magma, were emplaced 0.8, 0.3, and 0.15 m.y. ago; the youngest of the associated collapses was closely followed by resurgent doming of the caldera floor and development of a longitudinal graben. Postcaldera eruptions of dacite and andesite have persisted into Holocene time, and active hot springs are abundant along caldera-marginal and resurgent fault systems, suggesting a significant geothermal-energy resource. The Pleistocene eruption rate of this district and the abundance of older Quaternary to Miocene ash-flow remnants in the 33°S to 36°S segment of the glaciated southern Andes indicate that ash-flow magmatism has been no less important here than in the arid central Andes (16°S–28°S), where ash-flow sheets are far better preserved.

Geological Society of America Bulletin↗

New York Bight fault

High-resolution, single-channel and multichannel seismic-reflection profiles in the New York Bight provide 7 crossings of a 50-km-long fault that trends north-northeast for 30 km from its southern end, then bends northeast, and may continue northward beneath Long Island. Displacement, which is consistently down to the west, decreases upsection and suggests a growth fault. Dip of the fault is near vertical. Its maximum offset of 109 m is the largest offset at the base of the Coastal Plain known for any Cretaceous and younger fault along the East Coast. Seismic stratigraphic controls constrain motion on the fault between Late Cretaceous (95 m.y. B.P.) and middle Oligocene (30 m.y. B.P.). The evidence for Quaternary activity is ambiguous. The fault parallels a magnetic low to the east, interpreted as a buried Mesozoic rift basin from seismic-reflection data, and a gravity low to the west, interpreted as a structure within Paleozoic rocks from well data. Whether these structures control the location of, or movement on, the fault is not clear.

New Jersey, New York↗

A fan dam for Tulare Lake, California, and implications for the Wisconsin glacial history of the Sierra Nevada

Historic fluctuations and late Quaternary deposits of Tulare Lake, in the southern San Joaquin Valley, indicate that maximum lake size has depended chiefly on the height of a frequently overtopped spillway. This dependence gives Tulare Lake a double record of paleoclimate. Climate in the Tulare Lake region has influenced the degree to which the lake fills its basin during dry seasons and dry years: during the past 100,000–130,000 yr, incidence of desiccation of Tulare Lake (inferred from stiffness, mud cracks, and other hand-specimen properties) has been broadly consistent with the lake's salinity and depth (inferred from diatoms and ostracodes) and with regional vegetation (inferred from pollen). Climate, however, also appears to control basin capacity itself: Tulare Lake becomes large as a consequence of glacial-outwash aggradation of its alluvial-fan dam. Late Wisconsin enlargement of Tulare Lake probably resulted from the last major glaciation of the Sierra Nevada. The lake's spillway coincides with the axis of the glacial-outwash fan of a major Sierra Nevada stream; moreover, sediment deposited in the transgressive lake resembles glacial rock flour from the Sierra Nevada. Differential tectonic subsidence and deposition by a Coast Range creek facilitated the building of Tulare Lake's fan dam during the late Wisconsin but were less important than deposition of Sierra Nevada outwash. Four stratigraphically consistent 14 C dates on peat and wood give an age of 26,000 yr B.P. for the start of Tulare Lake's late Wisconsin transgression. The last major Sierra Nevada glaciation (Tioga glaciation) thus may have begun about 26,000 yr B.P., provided that vigorous glacial-outwash deposition began early in the glaciation. Onset of the Tioga glaciation about 26,000 yr B.P. is consistent with new stratigraphic and radiocarbon data from the northeastern San Joaquin Valley. These data suggest that the principal episode of glacial-outwash deposition of Wisconsin age began in the San Joaquin Valley after 32,000 yr B.P., rather than at least 40,000 yr B.P., as previously believed. An earlier enlargement of Tulare Lake probably resulted from a fan dam produced by the penultimate major (Tahoe) glaciation of the Sierra Nevada. Average sedimentation rates inferred from depths to a 600,000-yr-old clay and from radiocarbon dates indicate that this earlier lake originated no later than 100,000 yr B.P. The Tahoe glaciation therefore is probably pre-Wisconsin.

Geological Society of America Bulletin↗

Tectonic setting of the Portland-Vancouver area, Oregon and Washington: Constraints from low-altitude aeromagnetic data

Seismic activity in the Portland-Vancouver metropolitan area may be associated with various mapped faults that locally offset volcanic basement of Eocene age and younger. This volcanic basement is concealed in most places by young deposits, vegetation, and urban development. The U.S. Geological Survey conducted an aeromagnetic survey in September 1992 to investigate the extent of these mapped faults and possibly to help identify other seismic and volcanic hazards in the area. The survey was flown approximately 240 m above terrain, along flight lines spaced 460 m apart, and over an area about 50 × 50 km. These magnetic data indicate a pronounced northwest-striking magnetic lineation east of the Willamette River in downtown Portland associated with a fault concealed beneath Quaternary sedimentary deposits and previously inferred from shallow well data. The magnetic lineation confirms the existence of the fault and suggests that it has had a prolonged history: (1) Although well data indicate <200 m of vertical offset of underlying volcanic basement, models based on the aeromagnetic data from downtown Portland suggest reverse faulting with up to 1 km of offset deeper in the section. (2) The magnetic lineation associated with this fault extends southeast to the Clackamas River drainage, a distance of 50 km and considerably beyond the mapped extent of the fault. A northwest-striking magnetic anomaly located southwest of the Tualatin Mountains corresponds closely with another mapped fault and with mixed reverse and strike-slip faulting during a seismic swarm (M ≤ 3) in 1991. We believe these and other anomalies in the aeromagnetic data reflect the Portland Hills fault zone, believed to be the southwestern boundary of a structural basin now occupied by Portland and Vancouver. The postulated northeastern boundary of the basin, the Frontal fault zone, is also evident, although less well represented in the aeromagnetic data. Aeromagnetic anomalies, geologic mapping, and earthquake focal-plane solutions demonstrate a complex deformational history in the Portland-Vancouver area since middle Miocene time that includes elements of compression, extension, and dextral slip. These complexities reflect Portland-Vancouver's unique position within a north-south transition in tectonic styles along the Cascadia margin, from compressional in the north to extensional in the south.

Oregon, Washington↗

Volcanism and erosion during the past 930 k.y. at the Tatara-San Pedro complex, Chilean Andes

Geologic mapping, together with 73 new K-Ar and 40 Ar/ 39 Ar age determinations of 45 samples from 17 different volcanic units, plus paleomagnetic orientations, geochemical compositions, and terrestrial photogrammetry are used to define the chronostratigraphy of the Tatara–San Pedro complex, an eruptive center at 36°S on the volcanic front of the Andean southern volcanic zone. The Tatara–San Pedro complex preserves ≈55 km 3 of lavas that erupted from at least three central vent regions. Remnant, unconformity-bound sequences of lavas are separated by lacunae that include significant periods of erosion. Quaternary volcanism commenced ca. 930 ka with eruption of voluminous dacitic magma, followed 100 k.y. later by the only major rhyolitic eruption. From 780 ka onward, more than 80% of the preserved volume is basaltic andesite (52%–57% SiO 2 ), but petrographically and geochemically diverse dacitic magmas (63%–69% SiO 2 ) erupted sporadically throughout this younger, dominantly mafic phase of activity. A few basaltic lavas (49%–52% SiO 2 ) are present, mainly in portions of the complex older than 230 ka. The number of vents, the petrologic and geochemical diversity, and the temporal distribution of mafic and silicic lavas are consistent with emplacement of many separate batches of mafic magma into the shallow crust beneath the Tatara–San Pedro complex over the past million years.

Geological Society of America Bulletin↗

Tectonic controls on magmatism in the Geysers-Clear Lake region: Evidence from new geophysical models

In order to study magmatism and geothermal systems in The Geysers–Clear Lake region, we developed a detailed three-dimensional tomographic velocity model based on local earthquakes. This high-resolution model resolves the velocity structure of the crust in the region to depths of approximately 12 km. The most significant velocity contrasts in The Geysers–Clear Lake region occur in the steam production area, where high velocities are associated with a Quaternary granitic pluton, and in the Mount Hannah region, where low velocities occur in a 5-km-thick section of Mesozoic argillites. In addition, a more regional tomographic model was developed using traveltimes from earthquakes covering most of northern California. This regional model sampled the whole crust, but at a lower resolution than the local model. The regional model outlines low velocities at depths of 8–12 km in The Geysers–Clear Lake area, which extend eastward to the Coast Range thrust. These low velocities are inferred to be related to unmetamorphosed Mesozoic sedimentary rocks. In addition, the regional velocity model indicates high velocities in the lower crust beneath the Clear Lake volcanic field, which we interpret to be associated with mafic underplating. No large silicic magma chamber is noted in either the local or regional tomographic models. A three-dimensional gravity model also has been developed in the area of the tomographic imaging. Our gravity model demonstrates that all density contrasts can be accounted for in the upper 5–7 km of the crust. Two-dimensional magnetotelluric models of data from a regional, east-west profile indicate high resistivities associated with the granitic pluton in The Geysers production area and low resistivities in the low-velocity section of Mesozoic argillites near Mount Hannah. No indication of midcrustal magma bodies is present in the magnetotelluric data. On the basis of heat flow and geologic evidence, Holocene intrusive activity is thought to have occurred near the Northwest Geysers, Mount Hannah, Sulphur Bank Mine, and perhaps other areas. The geophysical data provide no conclusive evidence for such activity, but the detailed velocity model is suggestive of intrusive activity near Mount Hannah similar to that in the “felsite” of The Geysers production area. The geophysical models, seismicity patterns, distribution of volcanic vents, heat flow, and other data indicate that small, young intrusive bodies that were injected along a northeast trend from The Geysers to Clear Lake probably control the thermal regime.

Geological Society of America Bulletin↗

Northern San Andreas fault near Shelter Cove, California

The location of the San Andreas fault in the Shelter Cove area of northern California has been the subject of long-standing debate within the geological community. Although surface ruptures were reported near Shelter Cove in 1906, several subsequent workers questioned whether these ruptures represented true fault slip or shaking-related, gravity-driven deformation. This study, involving geologic and geomorphic mapping, historical research, and excavation across the 1906 rupture zone, concludes that the surface ruptures reported in 1906 were the result of strike-slip faulting, and that a significant Quaternary fault is located onshore near Shelter Cove. Geomorphic arguments suggest that the Holocene slip rate of this fault is greater than about 14 mm/yr, indicating that it plays an important role within the modern plate-boundary system. The onshore trace of the fault zone is well expressed as far north as Telegraph Hill; north of Telegraph Hill, its location is less well-constrained, but we propose that a splay of the fault may continue onshore northward for at least 9 km to the vicinity of Saddle Mountain.

California↗

New aeromagnetic data reveal large strike-slip (?) faults in the Northern Willamette Valley, Oregon

High-resolution aeromagnetic data from the northern Willamette Valley, Oregon, reveal large, northwest-striking faults buried beneath Quaternary basin sediments. Several faults known from geologic mapping are well defined by the data and appear to extend far beyond their mapped surface traces. The Mount Angel fault, the likely source of the Richter magnitude (M1) 5.6 earthquake in 1993, is at least 55 km long and may be connected in the subsurface with the Gales Creek fault 25 km farther northwest. Northeast of the Mount Angel fault, a 60-km-long, northwest-striking anomaly may represent a previously unrecognized dextral-slip fault beneath the towns of Canby and Molalla. Vertical offsets along the Mount Angel fault increase with depth, indicating a long history of movement for the fault. Dominantly northwest- trending, relatively straight faults, consistent stepover geometries, offset magnetic anomalies and earthquake focal mechanisms suggest that these faults collectively accommodate significant dextral slip. The 1993 earthquake may have occurred on a left-stepping restraining bend along the Mount Angel-Gales Creek fault zone.

Oregon↗

Potential seismic hazards and tectonics of the upper Cook Inlet basin, Alaska, based on analysis of Pliocene and younger deformation

The Cook Inlet basin is a northeast-trending forearc basin above the Aleutian subduction zone in southern Alaska. Folds in Cook Inlet are complex, discontinuous structures with variable shape and vergence that probably developed by right-transpressional deformation on oblique-slip faults extending downward into Mesozoic basement beneath the Tertiary basin. The most recent episode of deformation may have began as early as late Miocene time, but most of the deformation occurred after deposition of much of the Pliocene Sterling Formation. Deformation continued into Quaternary time, and many structures are probably still active. One structure, the Castle Mountain fault, has Holocene fault scarps, an adjacent anticline with flower structure, and historical seismicity. If other structures in Cook Inlet are active, blind faults coring fault-propagation folds may generate M w 6–7+ earthquakes. Dextral transpression of Cook Inlet appears to have been driven by coupling between the North American and Pacific plates along the Alaska-Aleutian subduction zone, and by lateral escape of the forearc to the southwest, due to collision and indentation of the Yakutat terrane 300 km to the east of the basin.

Alaska↗

Drainage reversals in Mono Basin during the late pliocene and Pleistocene

Mono Basin, on the eastern flank of the central Sierra Nevada, is the highest of the large hydrographically closed basins in the Basin and Range province. We use geomorphic features, shoreline deposits, and basalt-filled paleochannels to reconstruct an early to middle Pleistocene record of shorelines and changing spillways of Lake Russell in Mono Basin. During this period of time, Lake Russell repeatedly attained altitudes between 2205 and 2280 m-levels far above the present surface of Mono Lake (~1950 m) and above its last overflow level (2188 m). The spill point of Lake Russell shifted through time owing to late Tertiary and Quaternary faulting and volcanism. During the early Pleistocene, the lake periodically discharged through the Mount Hicks spillway on the northeastern rim of Mono Basin and flowed northward into the Walker Lake drainage basin via the East Walker River. Paleochannels recording such discharge were incised prior to 1.6 Ma, possibly between 1.6 and 1.3 Ma, and again after 1.3 Ma (ages of basaltic flows that plugged the paleochannels). Faulting in the Adobe Hills on the southeastern margin of the basin eventually lowered the rim in this area to below the altitude of the Mount Hicks spillway. Twice after 0.76 Ma, and possibly as late as after 0.1 Ma, Lake Russell discharged southward through the Adobe Hills spillway into the Owens-Death Valley system of lakes. This study supports a pre-Pleistocene aquatic connection through Mono Basin between the hydrologically distinct Lahontan and Owens-Death Valley systems, as long postulated by biologists, and also confirms a probable link during the Pleistocene for species adapted to travel upstream in fast-flowing water.

Geological Society of America Bulletin↗

Mesozoic and Cenozoic tectonics of the eastern and central Alaska Range: Progressive basin development and deformation in a suture zone

Analysis of late Mesozoic and Cenozoic sedimentary basins, metamorphic rocks, and major faults in the eastern and central Alaska Range documents the progressive development of a suture zone that formed as a result of collision of an island-arc assemblage (the Wrangellia composite terrane) with the former North American continental margin. New basin-analysis, structural, and geochronologic data indicate the following stages in the development of the suture zone: (1) Deposition of 3-5 km of Upper Jurassic-Upper Cretaceous marine strata (the Kahiltna assemblage) recorded the initial collision of the island-arc assemblage with the continental margin. The Kahiltna assemblage exposed in the northern Talkeetna Mountains represents a Kimmeridgian-Valanginian backarc basin that was filled by northwestward-flowing submarine-fan systems that were transporting sediment derived from Mesozoic strata of the island-arc assemblage. The Kahiltna assemblage exposed in the southern Alaska Range represents a Valanginian-Cenomanian remnant ocean basin filled by west-southwestward-flowing submarine-fan systems that were transporting sediment derived from Paleozoic continental-margin strata uplifted in the along-strike suture zone. A belt of retrograde metamorphism and a regional anticlinorium developed along the continental margin from 115 to 106 Ma, roughly coeval with the end of widespread deposition in the Kahiltna sedimentary basins. (2) Metamorphism of submarine-fan deposits of the Kahiltna basin, located near the leading edge of the island-arc assemblage, occurred at ca. 74 Ma, as determined from a new U-Pb zircon age for a synkinematic sill. Coeval with metamorphism of deposits of the Kahiltna basin in the southern part of the suture zone was development of a thrust-top basin, the Cantwell basin, in the northern part of the suture zone. Geologic mapping and compositional data suggest that the 4 km of Upper Cretaceous nonmarine and marginal marine sedimentary strata in this basin record regional subaerial uplift of the suture zone. (3) Shortening and exhumation of the suture zone peaked from 65 to 60 Ma on the basis of metamorphic and geochronologic data. In the southern part of the suture zone, submarine-fan deposits of the Kahiltna basin, which had been metamorphosed to kyanite schists at ???25 km depth and ???650 ??C, were exhumed and cooled through the biotite closure temperature (???300 ??C) by ca. 62 Ma. In the northern part of the suture zone, this time period was marked by shortening, uplift, and erosion of sedimentary strata of the Cantwell basin. (4) From 60 to 54 Ma, ???3 km of volcanic strata were deposited over deformed sedimentary strata of the Cantwell basin, and several granitic plutons (the McKinley sequence) were emplaced along the suture zone. (5) Following igneous activity, strikeslip displacement occurred from ca. 54 to 24 Ma along the Denali fault system, which had developed in the existing suture zone. Late Eocene-Oligocene strike-slip displacement resulted in the formation of several small sedimentary basins along the Denali fault system. (6) Regional transpressive shortening characterized the suture zone from ca. 24 Ma to the present. Flexural subsidence, related to regional shortening, is represented by late Eocene to Holocene nonmarine deposits of the Tanana foreland basin. Regional subsidence resulted in Miocene coal seams up to 20 m thick and well-developed lacustrine deposits. Overlying the Miocene deposits are ???1.2 km of Pliocene and Holocene conglomeratic deposits. Compositional and paleocurrent data from these younger deposits record regional Neogene uplift of the suture zone and recycling of detritus from older basins to the south that had become incorporated into the uplifted suture zone. Geologic mapping of major thrust faults along the northern and southern margins of the suture zone documents Paleozoic strata thrust over both Pliocene fluvial deposits and Quaternary glacial deposits of the Tanana basin.

Geological Society of America Bulletin↗

Eruptive history and geochronology of the Mount Baker volcanic field, Washington

Mount Baker, a steaming, ice-mantled, andesitic stratovolcano, is the most conspicuous component of a multivent Quaternary volcanic field active almost continuously since 1.3 Ma. More than 70 packages of lava flows and ~110 dikes have been mapped, ???500 samples chemically analyzed, and ~80 K-Ar and 40Ar/39Ar ages determined. Principal components are (1) the ignimbrite-filled Kulshan caldera (1.15 Ma) and its precaldera and postcaldera rhyodacite lavas and dikes (1.29-0.99 Ma); (2)~60 intracaldera, hydrothermally altered, andesite-dacite dikes and pods-remnants of a substantial early-postcaldera volcanic center (1.1-0.6 Ma); (3) unaltered intracaldera andesite lavas and dikes, including those capping Ptarmigan and Lasiocarpa Ridges and Table Mountain (0.5-0.2 Ma); (4) the long-lived Chowder Ridge focus (1.29-0.1 Ma)-an andesite to rhyodacite eruptive complex now glacially reduced to ~50 dikes and remnants of ~10 lava flows; (5) Black Buttes stratocone, basaltic to dacitic, and several contemporaneous peripheral volcanoes (0.5-0.2 Ma); and (6) Mount Baker stratocone and contemporaneous peripheral volcanoes (0.1 Ma to Holocene). Glacial ice has influenced eruptions and amplified erosion throughout the lifetime of the volcanic field. Although more than half the material erupted has been eroded, liberal and conservative volume estimates for 77 increments of known age yield cumulative curves of volume erupted vs. time that indicate eruption rates in the range 0.17-0.43 km3/k.y. for major episodes and longterm background rates of 0.02-0.07 km3/k.y. Andesite and rhyodacite each make up nearly half of the 161 ?? 56 km3 of products erupted, whereas basalt and dacite represent only a few cubic kilometers, each representing 1%-3% the total. During the past 4 m.y., the principal magmatic focus has migrated stepwise 25 km southwestward, from the edge of the Chilliwack batholith to present-day Mount Baker.

Geological Society of America Bulletin↗

Triggering of large earthquakes by magma-chamber inflation, Izu Peninsula (Japan)

A close spatial and temporal association between three aseismic uplift episodes and subsequent large (M ≈ 7) earthquakes on the Izu Peninsula, Japan, suggests a causal relation. Quaternary geology, as well as studies by other workers, indicates a volcanic origin for the observed uplift, and we use a simple inflation model constrained by leveling data to compute the expected increments in normal and shear stress across faults that ruptured in the earthquakes. Using a Mohr-Coulomb criterion, we find that in two cases out of three, stress changes induced by inflation are in the correct sense to trigger failure. Although changes are no more than a few bars, they represent the equivalent of several decades to a century of secular stress buildup.

Izu Peninsula↗

Early Tertiary marine fossils from northern Alaska: Implications for Arctic Ocean paleogeography and faunal evolution

Marine mollusks and ostracodes indicate a post-Danian Paleocene to early Eocene (Thanetian to Ypresian) age for a fauna from the Prince Creek Formation at Ocean Point, northern Alaska, that also contains genera characteristic of the Cretaceous and Neogene-Quaternary. The life-association of heterochronous taxa at Ocean Point resulted from an unusual paleogeographic setting, the nearly complete isolation of the Arctic Ocean from about the end of the Cretaceous until sometime in the Eocene, in which relict Cretaceous taxa survived into Tertiary time while endemic taxa evolved in situ; these later migrated to the northern mid-latitudes. Paleobiogeographic affinities of the Ocean Point association with mild temperate faunas of the London Basin (England), Denmark, and northern Germany indicate that a shallow, intermittent Paleocene seaway extended through the Norwegian-Greenland Sea to the North Sea Basin. Early Tertiary Arctic Ocean paleogeography deduced from faunal evidence agrees with that inferred from plate-tectonic reconstructions.

Geology↗