SEARCH · Search USGS

Results for “Techniques and Methods”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81Linked to original sources

USGS1999

Estimation of near-surface shear-wave velocity by inversion of Rayleigh waves

The shear‐wave ( S -wave) velocity of near‐surface materials (soil, rocks, pavement) and its effect on seismic‐wave propagation are of fundamental interest in many groundwater, engineering, and environmental studies. Rayleigh‐wave phase velocity of a layered‐earth model is a function of frequency and four groups of earth properties: P -wave velocity, S -wave velocity, density, and thickness of layers. Analysis of the Jacobian matrix provides a measure of dispersion‐curve sensitivity to earth properties. S -wave velocities are the dominant influence on a dispersion curve in a high‐frequency range (>5 Hz) followed by layer thickness. An iterative solution technique to the weighted equation proved very effective in the high‐frequency range when using the Levenberg‐Marquardt and singular‐value decomposition techniques. Convergence of the weighted solution is guaranteed through selection of the damping factor using the Levenberg‐Marquardt method. Synthetic examples demonstrated calculation efficiency and stability of inverse procedures. We verify our method using borehole S -wave velocity measurements.

Geophysics↗

USGS2018

Satellite psychrometric formulation of the operational simplified surface energy balance (SSEBop) model for quantifying and mapping evapotranspiration

Remote sensing-based evapotranspiration (ET) can be derived using various methods, from soil moisture accounting to vegetation-index based approaches to simple and complex surface energy balance techniques. Due to the complexity of fully representing and parameterizing ET sub-processes, different models tend to diverge in their estimations. However, most models appear to provide reasonable estimations that can meet user requirements for seasonal water use estimation and drought monitoring. One such model is the Operational Simplified Surface Energy Balance (SSEBop). This study presents a formulation of the SSEBop model using the psychrometric principle for vapor pressure/relative humidity measurements where the “dry-bulb” and “wet-bulb” equivalent readings can be obtained from satellite-based land surface temperature estimates. The difference in temperature between the dry (desired location) and wet limit (reference value) is directly correlated to the soil-vegetation composite moisture status (surface humidity) and thus producing a fractional value (0-1) to scale the reference ET. The reference ET is independently calculated using available weather data through the standardized Penman-Monteith equation. Satellite Psychrometric Approach (SPA) explains the SSEBop model more effectively than the energy balance principle because SSEBop does not solve all terms of the surface energy balance such as sensible and ground-heat fluxes. The SPA explanation demonstrates the psychrometric constant for the air can be readily adapted to a comparable constant for the surface, thus allowing the creation of a “surface” psychrometric constant that is unique to a location and day-of-year. This new surface psychrometric constant simplifies the calculation and explanation of satellite-based ET for several applications in agriculture and hydrology. The SPA formulation of SSEBop was found to be an enhancement of the ET equation formulated in 1977 by pioneering researchers. With only two key parameters, improved model results can be obtained using a one-time calibration for any bias correction. The model can be set up quickly for routine monitoring and assessment of ET at landscape scales and beyond.

Arizona↗

USGS2015

Evaluation of statistical and rainfall-runoff models for predicting historical daily streamflow time series in the Des Moines and Iowa River watersheds

Daily records of streamflow are essential to understanding hydrologic systems and managing the interactions between human and natural systems. Many watersheds and locations lack streamgages to provide accurate and reliable records of daily streamflow. In such ungaged watersheds, statistical tools and rainfall-runoff models are used to estimate daily streamflow. Previous work compared 19 different techniques for predicting daily streamflow records in the southeastern United States. Here, five of the better-performing methods are compared in a different hydroclimatic region of the United States, in Iowa. The methods fall into three classes: (1) drainage-area ratio methods, (2) nonlinear spatial interpolations using flow duration curves, and (3) mechanistic rainfall-runoff models. The first two classes are each applied with nearest-neighbor and map-correlated index streamgages. Using a threefold validation and robust rank-based evaluation, the methods are assessed for overall goodness of fit of the hydrograph of daily streamflow, the ability to reproduce a daily, no-fail storage-yield curve, and the ability to reproduce key streamflow statistics. As in the Southeast study, a nonlinear spatial interpolation of daily streamflow using flow duration curves is found to be a method with the best predictive accuracy. Comparisons with previous work in Iowa show that the accuracy of mechanistic models with at-site calibration is substantially degraded in the ungaged framework.

Iowa, Minnesota↗

USGS1984

Cost-effectiveness of the stream-gaging program in Alaska

This report documents the results of a study of the cost-effectiveness of the stream-gaging program in Alaska. Data uses and funding sources were identified for the 110 continuous stream-gaging stations that were being operated in September 1983 with a budget of about $1,700,000 per year. However, for the purposes of the report, only 98 stations were included in the analysis of cost-effectiveness. The current policy for operation of the 98-station program required $1,539,000 (1983 dollars) per year, which results in an average standard error of estimate of streamflow records for open-water periods of 18.4 percent. This overall level of accuracy at the 98 sites could be maintained with a budget of approximately $1,440,000 if the scheduling of visits and allocation of funds to the stations were changed. A minimum budget of $1,381,000 is required to operate the 98 stations; a budget less than this does not permit proper service and maintenance of the gages and recorders. At the minimum budget, the average standard error is 19.8 percent. Several other budgets were analyzed; the maximum budget analyzed was $2,500,000, which resulted in an average standard error of 11.9 percent. A significant portion of the standard error is attributable to loss of gage-height record, which is used to compute open-water discharge records. If gage-height record loss could be prevented, the average standard error could be reduced to 13.4 percent at the minimum operating budget of $1,381,000. It was determined that the standard error of estimate of streamflow records could be reduced by changing some operational policies and by reducing the amount of missing gage-height record. Since there is no method to determine standard errors of Alaska's winter records of streamflow, it was concluded that such a technique should be developed. More than half of western Alaska was identified as having insufficient streamflow data. It is suggested that steps be undertaken to remedy this situation as funds become available.

Alaska↗

USGS2007

The oxygen-18 isotope approach for measuring aquatic metabolism in high-productivity waters

We examined the utility of δ 18 O 2 measurements in estimating gross primary production (P), community respiration (R), and net metabolism (P : R) through diel cycles in a productive agricultural stream located in the midwestern U.S.A. Large diel swings in O 2 (±200 µmol L −1 ) were accompanied by large diel variation in δ 18 O 2 (±10‰). Simultaneous gas transfer measurements and laboratory‐derived isotopic fractionation factors for O 2 during respiration (α r ) were used in conjunction with the diel monitoring of O 2 and δ 18 O 2 to calculate P, R, and P :R using three independent isotope‐based methods. These estimates were compared to each other and against the traditional “open‐channel diel O 2 ‐change” technique that lacked δ 18 O 2 . A principal advantage of the δ 18 O 2 measurements was quantification of diel variation in R, which increased by up to 30% during the day, and the diel pattern in R was variable and not necessarily predictable from assumed temperature effects on R. The P, R, and P :R estimates calculated using the isotope‐based approaches showed high sensitivity to the assumed system fractionation factor (α r ). The optimum modeled ar values (0.986‐0.989) were roughly consistent with the laboratory‐derived values, but larger (i.e., less fractionation) than α r values typically reported for enzyme‐limited respiration in open water environments. Because of large diel variation in O 2 , P :R could not be estimated by directly applying the typical steady‐state solution to the O 2 and 18 O‐O 2 mass balance equations in the absence of gas transfer data. Instead, our results indicate that a modified steady‐state solution (the daily mean value approach) could be used with time‐averaged O 2 and δ 18 O 2 measurements to calculate P :R independent of gas transfer. This approach was applicable under specifically defined, net heterotrophic conditions. The diel cycle of increasing daytime R and decreasing nighttime R was only partially explained by temperature variation, but could be consistent with the diel production/consumption of labile dissolved organic carbon from photosynthesis.

Limnology and Oceanography↗

USGS1993

Estimating survival of radio-tagged birds

Parametric and nonparametric methods for estimating survival of radio-tagged birds are described. The general assumptions of these methods are reviewed. An estimate based on the assumption of constant survival throughout the period is emphasized in the overview of parametric methods. Two nonparametric methods, the Kaplan-Meier estimate of the survival funcrion and the log rank test, are explained in detail The link between these nonparametric methods and traditional capture-recapture models is discussed aloag with considerations in designing studies that use telemetry techniques to estimate survival.

Book chapter↗

USGS1982

Freshwater aspects of anadromous salmonid enhancement

Freshwater enhancement of anadromous salmonid populations has been practiced in the United States and Canada since the late 1800's. Reduction of natural spawning habitat and increasing fishing pressure make artificial enhancement a possible alternative to declining populations. Enhancement of anadromous salmonids involved improvement of the natural environment and reducing natural mortality. Methods of enhancement include fishways, spawning and rearing channels, stream rehabilitation, lake fertilization, environmental management, and artificial propagation techniques. Five Pacific salmon species and steelhead trout are commonly enhanced, primarily in watershed entering the Pacific Ocean and Great Lakes. Enhancement efforts contribute heavily to a commercial and sport industry realizing over $1.5 billion.

NOAA Technical Report NMFS Circular↗

USGS2016

Documenting the use of the Long Term Resource Monitoring element’s fish monitoring methodologies throughout the Midwest

The Upper Mississippi River Restoration (UMRR) Program’s Long Term Resource Monitoring (LTRM) element is designed to monitor and assess long term trends in the Upper Mississippi River System (UMRS). To accomplish this, standardized methods are used that allow for comparisons across pools and rivers. In recent years, other projects and other agencies have adopted the LTRM fish methodologies for use outside the UMRR. To determine how widespread the use of the Fish Component’s methods are, a twelve question survey was delivered via SurveyMonkey.com through the states comprising the American Fisheries Society (AFS) North Central Division and the Upper Mississippi River Conservation Committee. Approximately 2,000 professionals were reached with ≈11 percent participating. Results indicate that nearly all (95 percent) respondents use standardized methods in their sampling and 48 percent are familiar with the LTRM fish methodologies. Roughly one-third (35 percent) of all respondents have used the methods in the past and most (78 percent) of those have modified the methods to suit the information needs specific to their fishery. Results indicate that the LTRM methods have indeed spread outside the UMRR and are now a well-known and potentially widely used technique to sample fish communities.

Illinois, Iowa, Minnesota, Missouri, Wisconsin↗

USGS1969

Critical review of some multivariate procedures in the analysis of geochemical data

Simulation experiments have been conducted to examine the potential usefulness of R-mode and Q-mode factor methods in the analysis and interpretation of geochemical data. The R-mode factor analysis experiment consisted of constructing a factor model, using the model to generate a correlation matrix, and attempting to recover the model by R-mode techniques. The techniques were successful in determining the number of factors in the model, but the factor loadings could not be estimated even approximately on the basis of mathematical procedures alone. Q-mode factor methods were successful in recovering all of the properties of a model used to generate hypothetical chemical data on olivine samples , but it was necessary to use a correction previously regarded as unimportant.

Journal of the International Association for Mathe↗

USGS1986

Regional method to assess offshore slope stability.

The slope stability of some offshore environments can be evaluated by using only conventional acoustic profiling and short-core sampling, followed by laboratory consolidation and strength testing. The test results are synthesized by using normalized-parameter techniques. The normalized data are then used to calculate the critical earthquake acceleration factors or the wave heights needed to initiate failure. These process-related parameters provide a quantitative measure of the relative stability for locations from which short cores were obtained. The method is most applicable to offshore environments of gentle relief and simple subsurface structure and is not considered a substitute for subsequent site-specific analysis. -from ASCE Publications Information

Journal of Geotechnical Engineering↗

USGS2016

Online induction heating for determination of isotope composition of woody stem water with laser spectrometry: A methods assessment

Application of stable isotopes of water to studies of plant–soil interactions often requires a substantial preparatory step of extracting water from samples without fractionating isotopes. Online heating is an emerging approach for this need, but is relatively untested and major questions of how to best deliver standards and assess interference by organics have not been evaluated. We examined these issues in our application of measuring woody stem xylem of sagebrush using a Picarro laser spectrometer with online induction heating. We determined (1) effects of cryogenic compared to induction-heating extraction, (2) effects of delivery of standards on filter media compared to on woody stem sections, and (3) spectral interference from organic compounds for these approaches (and developed a technique to do so). Our results suggest that matching sample and standard media improves accuracy, but that isotopic values differ with the extraction method in ways that are not due to spectral interference from organics.

Isotopes in Environmental and Health Studies↗

USGS2013

Prediction of suspended-sediment concentrations at selected sites in the Fountain Creek watershed, Colorado, 2008-09

In 2008, the U.S. Geological Survey (USGS), in cooperation with Pikes Peak Area Council of Governments, Colorado Water Conservation Board, Colorado Springs City Engineering, and the Lower Arkansas Valley Water Conservancy District, began a small-scale pilot study to evaluate the effectiveness of the use of a computational model of streamflow and suspended-sediment transport for predicting suspended-sediment concentrations and loads in the Fountain Creek watershed in Colorado. Increased erosion and sedimentation damage have been identified by the Fountain Creek Watershed Plan as key problems within the watershed. A recommendation in the Fountain Creek Watershed plan for management of the basin is to establish measurable criteria to determine if progress in reducing erosion and sedimentation damage is being made. The major objective of this study was to test a computational method to predict local suspended-sediment loads at two sites with different geomorphic characteristics in order to evaluate the feasibility of using such an approach to predict local suspended-sediment loads throughout the entire watershed. Detailed topographic surveys, particle-size data, and suspended-sediment samples were collected at two gaged sites: Monument Creek above Woodmen Road at Colorado Springs, Colorado (USGS gage 07103970), and Sand Creek above mouth at Colorado Springs, Colorado (USGS gage 07105600). These data were used to construct three-dimensional computational models of relatively short channel reaches at each site. The streamflow component of these models predicted a spatially distributed field of water-surface elevation, water velocity, and bed shear stress for a range of stream discharges. Using the model predictions, along with measured particle sizes, the sediment-transport component of the model predicted the suspended-sediment concentration throughout the reach of interest. These computed concentrations were used with predicted flow patterns and channel morphology to determine fluxes of suspended sediment for the median particle size and for the measured range of particle sizes in the channel. Three different techniques were investigated for making the suspended-sediment predictions; these techniques have varying degrees of reliance on measured data and also have greatly differing degrees of complexity. Based on these data, the calibrated Rouse method provided the best balance between accuracy and both computational and data collection costs; the presence of substantial washload was the primary factor in eliminating the simpler and the more complex techniques. Based on this work, using the selected technique at additional sites in the watershed to determine relative loads and source areas appears plausible. However, to ensure that the methodology presented in this report yields reasonable results at other selected sites in the basin, it is necessary to collect additional verification data sets at those locations.

Colorado↗

USGS2001

Use of advanced borehole geophysical techniques to delineate fractured-rock ground-water flow and fractures along water-tunnel facilities in northern Queens County, New York

Advanced borehole geophysical methods were used to assess the geohydrology of crystalline bedrock along the course of a new water tunnel for New York City. The logging methods include natural gamma, spontaneous potential, single-point resistance, mechanical and acoustic caliper, focused electromagnetic induction, electromagnetic resistivity, magnetic susceptibility, borehole-fluid temperature and conductance, differential temperature, heat-pulse flowmeter, acoustic televiewer, borehole deviation, optical televiewer, and borehole radar. Integrated interpretation of the geophysical logs from an 825-foot borehole (1) provided information on the extent, orientation, and structure (foliation and fractures) within the entire borehole, including intensely fractured intervals from which core recovery may be poor; (2) delineated transmissive fracture zones intersected by the borehole and provided estimates of their transmissivity and hydraulic head; and (3) enabled mapping of the location and orientation of structures at distances as much as 100 ft from the borehole. Analyses of the borehole-wall image and the geophysical logs from the borehole on Crescent Street, in northern Queens County, are presented here to illustrate the application of the methods. The borehole penetrates gneiss and other crystalline bedrock that has predominantly southeastward dipping foliation and nearly horizontal and southeastward-dipping fractures. The heat-pulse flowmeter logs obtained under pumping and nonpumping conditions, together with the other geophysical logs, indicate five transmissive fracture zones. More than 90 percent of the open-hole transmissivity is associated with a fracture zone 272 feet BLS (below land surface). A transmissive zone at 787 feet BLS that consists of nearly parallel fractures lies within the projected tunnel path; here the hydraulic head is 12 to 15 feet lower than that of transmissive zones above the 315-foot depth. The 60-megahertz directional borehole radar logs indicate the location and orientation of two closely spaced radar reflectors that would intersect the projection of the borehole below its drilled depth. Subsequent excavation of the tunnel past the borehole allowed comparison of the log analysis with conditions observed in the tunnel. The tunnel was found to intersect gneiss with southeastward dipping foliation; many nearly horizontal fractures; and a southeastward dipping fracture zone whose location, character, and orientation was consistent with that of the mapped radar reflectors. The fracture zone produced inflow to the tunnel at a rate of 50 to 100 gallons per minute. All conditions indicated by the logging methods were consistent with those observed within the tunnel.

New York↗

USGS1999

Techniques for restoration of disturbed coastal wetlands of the Great Lakes

A long history of human-induced degradation of Great Lakes wetlands has made restoration a necessity, but the practice of wetland restoration is relatively new, especially in large lake systems. Therefore, we compiled tested methods and developed additional potential methods based on scientific understanding of Great Lakes wetland ecosytems to providc an overview of approaches for restoration. We addressed this challenge by focusing on four general fields of science: hydrology, sedimentology, chemistry, and biology. Hydrologic remediation methods include restoring hydrologic connections between diked and hydrologically altered wetlands and the lakes, restoring water tables lowered by ditching, and restoring natural variation in lake levels of regulated lakes Superior and Ontario. Sedimentological remediation methods include management of sediment input from uplands, removal or proper management of dams on tributary rivers, and restoration of protective barrier beaches and sand spits. Chemical remediation methods include reducing or eliminating inputs of contaminants from point and non-pont sources, natural sediment remediation by biodegradation and chemical degradation, and active sediment remediation by removal or by in situ treatment Biological remediation methods include control of non-target organisms, enhancing populations of target organisms, and enhancing habitat for target organisms. Some of these method were used in three major restoration projects (Metzger Marsh on Lake Erie and Cootes Paradise and Oshawa Second Marsh on Lake Ontario), which are described as case studies to show practical applications of wetland restoration in the Great Lakes. Successful restoration techniques that do not require continued manipulation must be founded in the basic tenets of ecology and should mimic natural processes. Success is demonstrated by the sustainability, productivity, nutrient-retention ability, invasibility, and biotic interactions within a restored wetland.

Wetlands↗

USGS2017

Reconstruction of spatio-temporal temperature from sparse historical records using robust probabilistic principal component regression

Scientific records of temperature and precipitation have been kept for several hundred years, but for many areas, only a shorter record exists. To understand climate change, there is a need for rigorous statistical reconstructions of the paleoclimate using proxy data. Paleoclimate proxy data are often sparse, noisy, indirect measurements of the climate process of interest, making each proxy uniquely challenging to model statistically. We reconstruct spatially explicit temperature surfaces from sparse and noisy measurements recorded at historical United States military forts and other observer stations from 1820 to 1894. One common method for reconstructing the paleoclimate from proxy data is principal component regression (PCR). With PCR, one learns a statistical relationship between the paleoclimate proxy data and a set of climate observations that are used as patterns for potential reconstruction scenarios. We explore PCR in a Bayesian hierarchical framework, extending classical PCR in a variety of ways. First, we model the latent principal components probabilistically, accounting for measurement error in the observational data. Next, we extend our method to better accommodate outliers that occur in the proxy data. Finally, we explore alternatives to the truncation of lower-order principal components using different regularization techniques. One fundamental challenge in paleoclimate reconstruction efforts is the lack of out-of-sample data for predictive validation. Cross-validation is of potential value, but is computationally expensive and potentially sensitive to outliers in sparse data scenarios. To overcome the limitations that a lack of out-of-sample records presents, we test our methods using a simulation study, applying proper scoring rules including a computationally efficient approximation to leave-one-out cross-validation using the log score to validate model performance. The result of our analysis is a spatially explicit reconstruction of spatio-temporal temperature from a very sparse historical record.

Advances in Statistical Climatology, Meteorology a↗

USGS2000

Analyzing slug tests in wells screened across the watertable: A field assessment

The slug test is the most widely used technique for the in situ estimation of hydraulic conductivity in confined and unconfined formations. Currently, there are no generally accepted methods in the groundwater literature for the analysis of response data from slug tests performed in wells screened across the watertable. A field study was undertaken in an attempt to develop a set of practical guidelines for tests conducted in such wells. Three wells, screened within unconsolidated material exhibiting a range of hydraulic conductivities (.05-30.0 m/day), were installed to depths of up to 9 m (30 ft) in Kansas River alluvium that ranges in thickness from 15 m to 21 m (50 ft to 70 ft) near Lawrence, Kansas. Intensive well-development efforts removed any drilling debris that could interfere with well-formation hydraulics. Once the wells were developed properly, a series of slug tests was performed at each well. The tests were designed to assess the role of the unsaturated zone and the appropriateness of assuming a fixed hydraulic head upper boundary. The results of this investigation can be summarized as follows: (1) the sufficiency of well development should be based on repeat slug tests and not the clarity of pumped water; (2) the effective screen radius for best model analysis should be based on a mass balance and not nominal screen dimensions; (3) the watertable can be represented as a constant head boundary and flow in the unsaturated zone can be ignored in most situations; (4) conventional techniques for the analysis of slug-test data seem to be reasonable for slug tests conducted in wells screened across the watertable, when used with the appropriate effective screen radius and normalized head range; and (5) fluctuations in the watertable elevation through time can be exploited to obtain some insight into the nature of vertical variation in hydraulic conductivity at a well. The results of this investigation indicate that multiple slug tests should be performed at wells screened across the watertable in order to reliably assess the sufficiency of well development and the appropriateness of conventional theory. ?? 2000 International Association for Mathematical Geology.

Natural Resources Research↗

USGS2006

Examples of transient sounding from groundwater exploration in sedimentary aquifers

Examples of the use of transient electromagnetic soundings for three ground-water exploration problems in sedimentary aquifers are given. The examples include: (1) estimating depths to water table and bedrock in an alluvium-filled basin, (2) mapping a confined fresh-water aquifer in bedrock sediments, and (3) locating a freshwater/salt-water interface in a glacial-outwash aquifer. The technique works quite well for these problems within the limitations imposed by the problem of equivalence. For thin conductive targets (S-equivalence) such as a salt-water lens, the ratio of the layer thickness to its resistivity can be determined, but not the individual layer parameters. The thickness of thin resistive zones (H-equivalence) can be resolved, but the resistivity of such layers is not well determined. The problem of H-equivalence is more severe than the S-equivalence. Equivalence imposes restrictions on the transient sounding method for some ground-water exploration problems. Model studies prior to field work can be used to assess the usefulness of the technique for a particular exploration objective.

Groundwater↗

USGS2004

Improved 206Pb/238U microprobe geochronology by the monitoring of a trace-element-related matrix effect; SHRIMP, ID-TIMS, ELA-ICP-MS and oxygen isotope documentation for a series of zircon standards

Precise isotope dilution-thermal ionisation mass spectrometry (ID-TIMS) documentation is given for two new Palaeozoic zircon standards (TEMORA 2 and R33). These data, in combination with results for previously documented standards (AS3, SL13, QGNG and TEMORA 1), provide the basis for a detailed investigation of inconsistencies in 206Pb/238U ages measured by microprobe. Although these ages are normally consistent between any two standards, their relative age offsets are often different from those established by ID-TIMS. This is true for both sensitive high-resolution ion-microprobe (SHRIMP) and excimer laser ablation-inductively coupled plasma-mass spectrometry (ELA-ICP-MS) dating, although the age offsets are in the opposite sense for the two techniques. Various factors have been investigated for possible correlations with age bias, in an attempt to resolve why the accuracy of the method is worse than the indicated precision. Crystallographic orientation, position on the grain-mount and oxygen isotopic composition are unrelated to the bias. There are, however, striking correlations between the 206Pb/238U age offsets and P, Sm and, most particularly, Nd abundances in the zircons. Although these are not believed to be the primary cause of this apparent matrix effect, they indicate that ionisation of 206Pb/238U is influenced, at least in part, by a combination of trace elements. Nd is sufficiently representative of the controlling trace elements that it provides a quantitative means of correcting for the microprobe age bias. This approach has the potential to reduce age biases associated with different techniques, different instrumentation and different standards within and between laboratories. Crown Copyright ?? 2004 Published by Elsevier B.V. All rights reserved.

Chemical Geology↗