Search USGSSearch

SEARCH · Search USGS

Results for “Southeastern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources

A review of geology and mining in the Marble Mountains, southeastern California

Mining in the Marble Mountains of southeastern California was active in the earliest 1900s and gradually declined to very few active mines by 1959. Most mining consisted of hard-rock prospects and mines, with a few soft-rock prospects and one mine. The Marble Mountains are a 10 km by 30 km, gently NE-dipping dipping structural block composed of Proterozoic plutonic and metamorphic rocks, Paleozoic sedimentary rocks, and Jurassic granitoids exposed along the western anti-dip slopes, and Miocene volcanic and sedimentary rocks exposed along the crest of the range and eastern dip slopes. Mineralization occurred in metamorphic aureoles of intrusions, along dikes, as contact metasomatic replacement bodies in carbonate rocks, or adjacent to or along thrust faults. Mineralization locally formed gold, copper, malachite, azurite, bornite, chalcopyrite, magnetite, specularite, limonite, quartz, epidote, actinolite, and garnet. Hard-rock prospects and mines are clustered into five locations. The mines are small open pits, a few consist of a shaft or two with a few adits, most are just a single shaft or adit. There are a few small open-pit marble mines, and one is an open pit fossil mine. Eight prospects were developed in the Miocene tuffaceous deposits; three in the northwest and five prospects, and a single adit, in the south. Most of the Marble Mountains are now in the Trilobite Wilderness or adjacent Areas of Critical Environmental Concern, and the area of the Golden Cycle district (Castle Mine area) and prospect areas in the southern part of the range are in the Mojave Trails National Monument. The Iron Hat mine, several nearby areas, and the Trilobite mine area are privately owned. No rock or mineral mines are currently active, but the Trilobite mine in the south end of the range is still open to the public.

California

Geologic map of southern Prince of Wales Island, southeastern Alaska

Southern Prince of Wales Island is underlain by stratified, intrusive, and metamorphic rocks of Cretaceous through pre-Middle Ordovician age and by surficial deposits. The region was mapped originally in reconnaissance fashion by Buddington and Chapin (1929) and subsequently by W.H. Condon and I.L. Tailleur (unpublished U.S.G.S. report, 1960) primarily with the use of aerial photographs. More recently, MacKevett (I 963) studied the geology of the Bokan Mountain-Stone Rock Bay area, Herreid and others (1978) and G. Donald Eberlein, Michael Churkin Jr., and Walter Vennum (Eberlein and others, 1983; unpublished data) mapped Kassa and Klakas Inlets and regions to the north, and Thompson and others (1982) and B. Col lot (in Saint-Andre and others, 1983) studied the Bokan Mountain Granite. The inset map of Plate 1 shows where this published and unpublished mapping has been incorporated into our geologic map.

Alaska

Introduction to special section: China shale gas and shale oil plays

In the last 10 years, the success of shale gas and shale oil productions as a result of technological advances in horizontal drilling, hydraulic fracturing and nanoscale reservoir characterization have revolutionized the energy landscape in the United States. Resource assessment by the China Ministry of Land and Resources in 2010 and 2012 and by the U.S. Energy Information Administration in 2011 and 2013 indicates China’s shale gas resource is the largest in the world and shale oil resource in China is also potentially significant. Inspired by the success in the United States, China looks forward to replicating the U.S. experience to produce shale gas to power its economy and reduce greenhouse gas emissions. By 2014, China had drilled 400 wells targeting marine, lacustrine, and coastal swamp transitional shales spanning in age from the Precambrian to Cenozoic in the last five years. So far, China is the leading country outside of North America in the viable production of shale gas, with very promising prospects for shale gas and shale oil development, from the Lower Silurian Longmaxi marine shale in Fuling in the southeastern Sichuan Basin. Geological investigations by government and academic institutions as well as exploration and production activities from industry indicate that the tectonic framework, depositional settings, and geomechanical properties of most of the Chinese shales are more complex than many of the producing marine shales in the United States. These differences limit the applicability of geologic analogues from North America for use in Chinese shale oil and gas resource assessments, exploration strategies, reservoir characterization, and determination of optimal hydraulic fracturing techniques. Understanding the unique features of the geology, shale oil and gas resource potential, and reservoir characteristics is crucial for sweet spot identification, hydraulic fracturing optimization, and reservoir performance prediction. Even though China shale gas and shale oil exploration is still in an early stage, limited data are already available. We are pleased to have selected eight high-quality papers from fifteen submitted manuscripts for this timely section on the topic of China shale gas and shale oil plays. These selected papers discuss various subject areas including regional geology, resource potentials, integrated and multidisciplinary characterization of China shale reservoirs (geology, geophysics, geochemistry, and petrophysics) China shale property measurement using new techniques, case studies for marine, lacustrine, and transitional shale deposits in China, and hydraulic fracturing. One paper summarizes the regional geology and different tectonic and depositional settings of the major prospective shale oil and gas plays in China. Four papers concentrate on the geology, geochemistry, reservoir characterization, lithologic heterogeneity, and sweet spot identification in the Silurian Longmaxi marine shale in the Sichuan Basin in southwest China, which is currently the primary focus of shale gas exploration in China. One paper discusses the Ordovician Salgan Shale in the Tarim Basin in northwest China, and two papers focus on the reservoir characterization and hydraulic fracturing of Triassic lacustrine shale in the Ordos Basin in northern China. Each paper discusses a specific area.

Interpretation

The marine geology of the eastern Santa Barbara Channel, with particular emphasis on the ground water basins offshore from the Oxnard Plain, Southern California

Marine geophysical investigations provide new data concerning the stratigraphy, tectonic and sedimentary history, and the ground water geology of the southeastern Santa Barbara Channel region. The offshore stratigraphy identified in seismic reflection profiles includes a succession of Neogene to Quaternary strata. The middle Miocene Conejo volcanics form an acoustical basement and the overlying late Cenozoic sedimentary rocks attain a thickness greater than 2,500 m. These sedimentary deposits fill a structurally controlled, physiographic and depositional depression called the Ventura Basin. Structure consists generally of a gently folded, east-trending Tertiary synclinorium bordered on the north by a regional thrust fault and on the south by a steep asymmetrical anticlinal ridge. Most structures show evidence of north-south compression that occurred during early Pleistocene time. Three well-defined unconformities represent widespread erosion in late Miocene, early to middle Pleistocene, and late Pleistocene time. The boundaries of Miocene, Pliocene, and lower Pleistocene strata continue uninterrupted eastward along the southern part of Santa Barbara basin to Hueneme Canyon, where they turn northeast and can be traced to the coast near Port Hueneme. These limits probably represent the south edge of the Santa Barbara basin during Pliocene and Pleistocene time. Fresh water-bearing materials of the Oxnard plain are unconsolidated Quaternary sediment laid down on more consolidated Tertiary rocks. Offshore, the total fresh water-bearing materials distinguished in the seismic reflection profiles attain a thickness of about 356 m and have an areal extent of over 760 km2. Strata that contain the offshore continuation of the five major on-land aquifers (Grimes Canyon, Fox Canyon, Hueneme, Mugu, and Oxnard aquifers) are identified in the seismic reflection profiles. These strata make up the two offshore ground-water basins, the Mound and Oxnard plain ground-water basins, which are separated by the east-west trending Oak Ridge fault. Possible entrance areas for salt water intrusion into fresh water aquifers are found along the walls of the submarine canyons and along the northern slopes of Santa Barbara and Santa Monica basins. Hueneme and Mugu aquifers are probably exposed locally in all five submarine canyons of the Oxnard offshore area and may also crop out along the upper northern slope of Santa Monica basin. In all of these areas, salt water readily intrudes the aquifers. A salinity-temperature-depth study made in April, 1971, does not indicate any great dilution of surface ocean water by fresh water that could be 'leaking' from the exposed aquifers along the walls of Hueneme Canyon and the landward slope of Santa Barbara Channel. Earthquakes in the vicinity of the Oxnard plain suggest that the region is seismically active. Epicenters are widely dispersed over the region. No distinct trend or alignment of earthquake epicenters occurs near the trace of any of the faults, although many epicenters are scattered around the Oak Ridge zone of deformation in the northern part of the region. The largest magnitude earthquake recorded in the area was a magnitude 5.7 that occurred on February 21, 1973, offshore of Point Mugu, south of the Oxnard plain.

California

Geologic interpretation and multibeam bathymetry of the sea floor in southeastern Long Island Sound

Digital terrain models (DTMs) produced from multibeam echosounder (MBES) bathymetric data provide valuable base maps for marine geological interpretations (e.g. Todd and others, 1999; Mosher and Thomson, 2002; ten Brink and others, 2004; Poppe and others, 2006a,b). These maps help define the geological variability of the sea floor (one of the primary controls of benthic habitat diversity); improve our understanding of the processes that control the distribution and transport of bottom sediments, the distribution of benthic habitats and associated infaunal community structures; and provide a detailed framework for future research, monitoring, and management activities. The bathymetric survey interpreted herein (National Oceanic and Atmospheric Administration (NOAA) survey H11255) covers roughly 95 km? of sea floor in southeastern Long Island Sound (fig. 1). This bathymetry has been examined in relation to seismic reflection data collected concurrently, as well as archived seismic profiles acquired as part of a long-standing geologic mapping partnership between the State of Connecticut and the U.S. Geological Survey (USGS). The objective of this work was to use these geophysical data sets to interpret geomorphological attributes of the sea floor in terms of the Quaternary geologic history and modern sedimentary processes within Long Island Sound.

Open-File Report

Rare earth mineral potential in the southeastern U.S. Coastal Plain from integrated geophysical, geochemical, and geological approaches

We combined geophysical, geochemical, mineralogical, and geological data to evaluate the regional presence of rare earth element (REE)−bearing minerals in heavy mineral sand deposits of the southeastern U.S. Coastal Plain. We also analyzed regional differences in these data to determine probable sedimentary provenance. Analyses of heavy mineral separates covering the region show strong correlations between thorium, monazite, and xenotime, suggesting that radiometric equivalent thorium (eTh) can be used as a geophysical proxy for those REE-bearing minerals. Airborne radiometric data collected during the National Uranium Resource Evaluation (NURE) program cover the southeastern United States with line spacing varying from ∼2 to 10 km. These data show eTh highs over Cretaceous and Tertiary Coastal Plain sediments from the Cape Fear arch in North Carolina to eastern Alabama; these highs decrease with distance from the Piedmont. Quaternary sediments along the modern coasts show weaker eTh anomalies, except near coast-parallel ridges from South Carolina to northern Florida. Prominent eTh anomalies are also observed over large riverbeds and their floodplains, even north of the Cape Fear arch where surrounding areas are relatively low. These variations were verified using ground geophysical measurements and sample analyses, indicating that radiometric methods are a useful exploration tool at varying scales. Further analyses of heavy mineral separates showed regional differences, not only in concentrations of monazite, but also of rutile and staurolite, and in magnetic susceptibility. The combined properties suggest the presence of subregions where heavy mineral sediments are primarily sourced from high-grade metamorphic, low-grade metamorphic, or igneous terrains, or where they represent a mixing of these sources. Comparisons between interpreted sources of heavy mineral sands near the Fall Line and igneous and metamorphic Piedmont and Blue Ridge units showed a strong correspondence with rocks closest to the Fall Line and poor correspondence with rocks farther inland. This strongly suggests that the primary source of those heavy minerals, especially monazite, is the rocks that formed the rocky coast that was present during opening of the Atlantic Ocean, which in turn indicates the importance of coastal processes in forming heavy mineral sand concentrations. Furthermore, narrow radiometric eTh and K anomalies are associated with major rivers, indicating limited spatial influence of fluvial processes. Later coastal plain sediment deposition appears to have involved reworking of sediments, providing an “inheritance” of the rocky coast composition that persists for some distance from the Fall Line. However, this inheritance is reduced with distance, and sediments within ∼100 km of the coast in Georgia and Florida exhibit properties indicative of mixing from multiple sources.

GSA Bulletin

Climatic-eustatic control of Holocene nearshore parasequence development, southeastern Texas coast

Sediment cores, seismic profiles, radiocarbon dates, and faunal assemblages were used to interpret the depositional setting and geological evolution of the southeastern Texas coast during the last glacio-eustatic cycle. Discrete lithofacies and biofacies zones in the ebb-dominated Sabine Lake estuary and adjacent chenier plain record alternating periods of rapid marine flooding and gradual shoaling related to linked climatic/eustatic fluctuations. Monospecific zones of the mollusks Rangia cuneata and Crassostrea virginica, respectively, indicate high fresh water outflow followed by invasion of marine water, whereas intervening organic-rich zones record bayhead delta deposition. High-frequency parasequence stacking patterns within the valley fill and across the adjacent interfluve reflect an initial rapid rise in sea level about 9 ka that flooded abandoned alluvial terraces and caused onlap of Holocene marsh in the incised valley. The rapid rise was followed by slowly rising and oscillating sea level that filled the deepest portions of the incised valleys with fluvially dominated estuarine deposits, and then a maximum highstand (+1 m msl) about 5 ka that flooded the former subaerial coastal plain between the incised valleys and constructed the highest beach ridges. Between 3.5 and 1.5 ka, sea level oscillated and gradually fell, causing a forced regression and rapid progradation of both the chenier plain and accretionary barrier islands. The only significant sands in the valley fill are (1) falling-stage and lowstand-fluvial sediments between the basal sequence boundary and transgressive surface unconformity, and (2) highstand beach-ridge sediments of the chenier plain.

Texas

Geology and ground-water conditions in southern Nassau and southeastern Queens Counties, Long Island, N.Y.

Test drilling, electrical logging, and water sampling of 'outpost' and other wells have revealed the existence of a deep confined body of salt water in the Magothy(?) formation beneath southwestern Nassau and southeastern Queens Counties, Long Island, N.Y. In connection with a test-drilling program, cooperatively sponsored by the U.S. Geological Survey, the Nassau County Department of Public Works, and the New York State Water Resources Commission (formerly Water Power and Control Commission), 13 wells ranging in depth from about 130 to 800 feet were drilled during 1952 and 1953 and screened at various depths in the Magothy(?) formation and Jameco gravel. On the basis of the preliminary geologic, hydrologic, and chemical data from these wells, a detailed investigation of ground-water conditions from the water table to the bedrock was begun in a 200-square-mile area in southern Nassau and southeastern Queens Counties. The Inain purposes of the investigation were to delineate the bodies of fresh and salty ground water in the project area, to relate their occurrence and movement to geologic and hydrologic conditions, to estimate the rate of encroachment, if any, of the salty water, and to evaluate the effectiveness of the existing network of outpost wells as detectors of salt-water encroachment. About a million people in the report area, residing mainly in southern Nassau County, are completely dependent on ground water as a source of supply. Fortunately, precipitation averages about 44 inches per year, of which approximately half is estimated to percolate into the ground-water reservoir. The ground water is contained in and moves through eight differentiated geologic units composed of unconsolidated gravel, sand, and clay, of Late Cretaceous, Pleistocene, and Recent age, having a maximum total thickness of about 1,700 feet. The underlying metamorphic and igneous crystalline basement rocks are of Precambrian age and are not water bearing. The water-yielding units from the surface down are (1) the upper Pleistocene deposits, (2) the principal artesian aquifer, composed of the Jameco gravel and Magothy(?) formation, and (3) the Lloyd sand member of the Raritar formation. The confining units are the '20-foot' clay, the Gardiners clay, and the clay member of the Raritan formation. The upper Pleistocene deposits contain an extensive unconfined body of fresh water. Fresh water under artesian conditions is contained in the principal artesian aquifer and the Lloyd sand member. The piezometric surface of the principal artesian aquifer is similar in shape to the south-ward-sloping water table; it ranges in altitude from about sea level to 55 feet above. The chemical quality of the fresh ground water in most of the area in all aquifers is good to excellent, and concentrations of dissolved solids and of chloride generally are below 100 ppm (parts per million) and 10 ppm, respectively. Analyses of water samples from selected wells show no progressive increase in concentration of chloride in most of the area. The data on quality of water have been used to delineate one major and several minor bodies of salty ground water. The wedgeshaped main confined salt-water body, in which the concentration of chloride reaches about 17,000 ppm, is in the Magothy(?) formation and Jameco gravel in extreme southwestern Nassau County and southeastern Queens County. The base of the salt-water wedge is about at the top of the clay member of the Raritan formation. Beneath the barrier beach in south-central and southeastern Nassau County a shallow extension of the main confined salt-water body contains as much as 4,000 ppm of chloride and is separated from the lower main salt-water body by fresh ground water. Shallow, thin bodies of unconfined salty ground water are common in the upper Pleistocene and Recent deposits adjacent to salty surface water in tidal creeks, bays, and the Atlantic

New York

Foreward: Geology Field Trips in and around the U.S. Capital

The first annual meeting of the Geological Society of America (GSA) was held in 1888 in Ithaca, New York (Fairchild, 1932), but official Sections of GSA formed much later. During the spring of 1949, a symposium in Knoxville, Tennessee, on mineral resources of the southeastern United States became the catalyst for the creation of the Southeastern Section of the Geological Society of America (King, 1964), and the first annual meeting of the Southeastern Section was held in 1952 in Roanoke, Virginia (Wilson, 1954). The Northeastern Section formed much later, and its first annual meeting was held in 1966 in Philadelphia, Pennsylvania (Socolow, 1968). At all of these section meetings, field trips have been important venues for geologists and especially students to gather together, examine rocks in the field, and discuss ideas. These field trips have been especially important at combined section meetings because they provide settings for geologists who are experienced in one geographic region to examine and compare the geology of other regions. The first combined meeting of the Southeastern and Northeastern sections occurred in 1976 in Arlington, Virginia. Since then, the Southeastern and Northeastern sections have met together on numerous occasions, including 1982 in Washington, DC; 1991 in Baltimore, Maryland; 2004 in Tysons Corner, Virginia; and 2010 in Baltimore, Maryland. Since the first combined section meeting in 1976, there has been a gradual increase in the role of technology in geology field studies. In fact, during the past several decades there has been an increase in emphasis in our society on the instrumental component of science, the goal of which is operational techniques to do or control things, and a corresponding decrease in emphasis on the natural philosophy component of science, the goal of which is a greater understanding of the natural world (Dear, 2006). The modern education acronym STEM (Science, Technology, Engineering, and Mathematics), for example, is often used as a catch-all term that implies that science and technology are relatively synonymous, and implies that greater technology leads automatically to greater understanding of the natural world. This assumption, however, is not always valid (Dear, 2006), and technology should not be promoted as a substitute for field experiences. Technology can be a tool that leads to greater understanding of the natural world, but not all Science uses technology as a means of providing greater understanding. The benefits of new technologies include: (1) data of greater resolution; and (2) greater efficiency of capturing, storing, and visualizing data. The risks of new technologies include: (1) an overabundance of data, some of which may be of little value; (2) less time available for analysis of data, if geologists become occupied primarily with capturing and storing data; and (3) errors that arise from complacency and the perception that field-checking may not be necessary. In other words, there is a risk that a glut of data and vast amounts of time devoted to the capturing and storing of data may result in a reduced interest and (or) willingness to field-check data. In the spirit of the early GSA section meetings, we feel that there are still enormous advantages to conducting geology field trips in conjunction with traditional meeting presentations and posters. In 2020, with this current combined Southeastern and Northeastern section meeting in Reston, Virginia, we have assembled eight different field trips that cover a wide range of territory in and around the Nation’s capital. These field trip localities include the immediate vicinity of Washington, DC, as well as various locations in nearby areas of Virginia, Maryland, and West Virginia. The physiographic provinces include Mesozoic Rift Basins, the Piedmont, the Blue Ridge, the Valley and Ridge, and the Allegheny Plateau of the Appalachian Basin. The field trip sites exhibit a wide range of igneous, metamorphic, and sedimentary rocks, as well as rocks with a wide range of geologic ages from the Mesoproterozoic to the Holocene. We hope that this guidebook provides new motivation for geologists to examine rocks in the field, to discuss ideas with colleagues in the field, and to avoid becoming complacent. The editors of this volume would like to thank the authors of the different field trip guides, the field trip leaders, and all of the reviewers who made suggestions for improving the field trip manuscripts. The editors would also like to thank Elle Derwent of GSA for her logistical help and guidance regarding the field trips, and April Leo and the staff of the GSA Publications Department for seeing this book through to publication.

Maryland, Virginia, West Virginia

Water-level data from wells in the vicinity of the Waste Isolation Pilot Plant, southeastern New Mexico

The U.S. Geological Survey monitored water levels in wells in the vicinity of the Waste Isolation Pilot Plant, a storage facility constructed in bedded salts in which defense-associated transuranic wastes will be deposited, in southeastern New Mexico during 1977 to 1985. A variety of methods was used to measure water levels. The particular method utilized at a given time depended on several factors, including the amount of condensation in the well, well-head configuration, depth to water, rate of water level change, and availability of equipment. The five methods utilized were: air line, Lynes pressure sentry system, M-scope, steel tape, and winch. (Lantz-PTT)

Open-File Report

Geology, geochemistry, and genesis of the Greens Creek massive sulfide deposit, Admiralty Island, southeastern Alaska

In 1996, a memorandum of understanding was signed by representatives of the U.S. Geological Survey and Kennecott Greens Creek Mining Company to initiate a cooperative applied research project focused on the Greens Creek massive sulfide deposit in southeastern Alaska. The goals of the project were consistent with the mandate of the U.S. Geological Survey Mineral Resources Program to maintain a leading role in national mineral deposits research and with the need of Kennecott Greens Creek Mining Company to further development of the Greens Creek deposit and similar deposits in Alaska and elsewhere. The memorandum enumerated four main research priorities: (1) characterization of protoliths for the wall rocks, and elucidation of their alteration histories, (2) determination of the ore mineralogy and paragenesis, including metal residences and metal zonation within the deposit, (3) determination of the ages of events important to ore formation using both geochronology and paleontology, and (4) development of computer models that would allow the deposit and its host rocks to be examined in detail in three dimensions. The work was carried out by numerous scientists of diverse expertise over a period of several years. The written results, which are contained in this Professional Paper, are presented by 21 authors: 13 from the U.S. Geological Survey, 4 from Kennecott Greens Creek Mining Company, 2 from academia, and 2 from consultants. The Greens Creek deposit (global resource of 24.2 million tons at an average grade of 13.9 percent zinc, 5.1 percent lead, 0.15 troy ounce per ton gold, and 19.2 troy ounces per ton silver at zero cutoff) formed in latest Triassic time during a brief period of rifting of the Alexander terrane. The deposit exhibits a range of syngenetic, diagenetic, and epigenetic features that are typical of volcanogenic (VMS), sedimentary exhalative (SEDEX), and Mississippi Valley-type (MVT) genetic models. In the earliest stages of rifting, formation of precious-metal-rich silica-barite-carbonate white ores began at low temperature in a shallow, subaqueous setting, probably a thin carbonate shelf on the flanks of the Alexander landmass. Epigenetic carbonate replacement textures in the footwall dolostones are overlain by stratiform silica-carbonate-barite-rich ores and indicate that early mineralization formed at and just beneath the paleo sea floor by mixing of a reduced, precious-metal-rich, base-metal-poor hydrothermal fluid with oxygenated seawater. As rifting intensified, the shelf was downfaulted and isolated as a graben. Isolation of the basin and onset of starved-basin shale sedimentation was concurrent with emplacement of mafic-ultramafic intrusives at shallow levels in the rift, resulting in an increasingly higher temperature and progressively more anoxic ore-forming environment. The formation of the main stage of massive sulfide ores began as the supply of bacterially reduced sulfur increased in the accumulating shales. As the main-stage mineralization intensified, shale sedimentation inundated the hydrothermal system, eventually forming a cap. Biogenic sulfate reduction supplied reduced sulfur to the base of the shales where mixing occurred with hot, base-metal-rich hydrothermal fluids. Ore deposition continued by destruction and epigenetic replacement of the early white ores in proximal areas and by inflation and diagenetic replacement of unlithified shale at the interface between the white ores and the base of the shale cap. Ore deposition waned as the shales became lithified and as the supply of bacterially reduced sulfur to the site of ore deposition ceased. The final stages of rifting resulted in the emplacement of mafic-ultramafic intrusive rocks into the Greens Creek system and extrusion of voluminous basaltic flows at the top of the Triassic section. Greenschist facies metamorphism during the Jurassic-Cretaceous accretion of the Alexander terrane to the continental margin resulted in recrystalli

Professional Paper

Hydraulic properties of the Ironton and Galesville sandstones, Shakopee Mdewakanton Sioux Community, southeastern Minnesota, 2004

The U.S. Geological Survey, in cooperation with the Shakopee Mdewakanton Sioux Community, conducted an aquifer test December 6–22, 2004, to improve definition of the hydraulic properties of the Ironton and Galesville Sandstones beneath the Shakopee Community in southeastern Minnesota. Three wells were used in the aquifer test—a production well and two observation wells, located 3,247 feet northwest of the production well and 3,049 feet southeast of the production well. The production well, completed in the Ironton and Galesville Sandstones, was pumped at about 600 gallons per minute from 10:30 a.m. on December 6, 2004, to 3:26 p.m. on December 9, 2004. Drawdown and recovery water levels were measured in all three wells. Four curve-fitting methods and two graphical methods were used to estimate the transmissivity and storage coefficient of the Ironton and Galesville Sandstones. The four curve-fitting methods were the Theis, Hantush, Hantush-Jacob, and Neumann-Witherspoon methods. These methods were applied to the drawdown and residual recovery curves of the observation wells. The two graphical methods were the Cooper-Jacob method and the Theis recovery method. The Cooper-Jacob method was applied to the drawdown curve of the production well and the drawdown curves of the two observation wells. The Theis recovery method was applied to the residual drawdown curves of the two observation wells. The transmissivity estimated using the six methods ranged from 450 to 650 feet squared per day. The average transmissivity for the six methods was 540 feet squared per day. The storage coefficient estimated using the six methods ranged from 4.2 to 5.7 x 10-5. The average storage coefficient for all six methods was 5.0 x 10-5. The hydraulic conductivity was estimated by dividing the estimated transmissivity by 45 feet. The average hydraulic conductivity for the six methods was 12.1 feet per day.

Minnesota