SEARCH · Search USGS

Results for “Sound Waves”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources

USGS2020

Characterization of water-quality and bed-sediment conditions in Currituck Sound, North Carolina, prior to the Mid-Currituck Bridge construction, 2011–18

The North Carolina Turnpike Authority plans to improve transportation in the Currituck Sound area by constructing a two-lane bridge—the Mid-Currituck Bridge—across Currituck Sound from the mainland to the Outer Banks, North Carolina. The results of the final environmental impact statement for the project indicate potential water-quality and habitat effects for Currituck Sound associated with the bridge and roadway improvements. The primary objective of this study is to characterize water-quality conditions and bed-sediment chemistry in the vicinity of the planned Mid-Currituck Bridge, providing a baseline for evaluating the potential effects of bridge construction and bridge deck runoff on environmental conditions in Currituck Sound. From August 2011 through January 2018, water-quality and bed-sediment samples were collected from five sampling stations along the planned bridge alignment. Samples were analyzed for numerous characteristics, including physical properties and constituents that are associated with bridge deck stormwater runoff and are important to estuarine waters. The analyzed characteristics included dissolved oxygen, pH, specific conductance, turbidity, suspended solids, metals, nutrients, semi-volatile organic compounds, bacteria, chlorophyll a, cyanotoxins, and phytoplankton abundance. The most common constituents with concentrations above applicable State and Federal water-quality thresholds included chlorophyll a, pH, turbidity, Enterococci, and pentachlorophenol. Few bed-sediment samples had constituent concentrations that exceeded applicable sediment-quality guidelines. Results indicated that water sampled along the planned bridge alignment was well mixed vertically and horizontally but varied temporally. Seasonal changes in water quality best explained the variations in water-quality conditions in Currituck Sound during the study. Wind conditions also influenced water levels and water-quality conditions. Turbidity and concentrations of particle-associated constituents tended to be higher when water levels were lower, possibly reflecting the increased resuspension of bottom materials from wind-driven wave action.

North Carolina↗

USGS2001

Three-dimenstional crustal velocity structure beneath the Strait of Georgia, British Columbia

The Strait of Georgia is a topographic depression straddling the boundary between the Insular and Coast belts in southwestern British Columbia. Two shallow earthquakes located within the strait ( M = 4.6 in 1997 and M = 5.0 in 1975) and felt throughout the Vancouver area illustrate the seismic potential of this region. As part of the 1998 Seismic Hazards Investigation of Puget Sound (SHIPS) experiment, seismic instruments were placed in and around the Strait of Georgia to record shots from a marine source within the strait. We apply a tomographic inversion procedure to first-arrival traveltime data to derive a minimum-structure 3-D P -wave velocity model for the upper crust to about 13 km depth. We also present a 2-D velocity model for a profile orientated across the Strait of Georgia derived using a minimum-parameter traveltime inversion approach. This paper represents the first detailed look at crustal velocity variations within the major Cretaceous to Cenozoic Georgia Basin, which underlies the Strait of Georgia. The 3-D velocity model clearly delineates the structure of the Georgia Basin. Taking the 6 km s −1 isovelocity contour to represent the top of the underlying basement, the basin thickens from between 2 and 4 km in the northwestern half of the strait to between 8 and 9 km at the southeastern end of the study region. Basin velocities in the northeastern half are 4.5–6 km s −1 and primarily represent the Upper Cretaceous Nanaimo Group. Velocities to the south are lower (3–6 km s −1 ) because of the additional presence of the overlying Tertiary Huntingdon Formation and more recent sediments, including glacial and modern Fraser River deposits. In contrast to the relatively smoothly varying velocity structure of the basin, velocities of the basement rocks, which comprise primarily Palaeozoic to Jurassic rocks of the Wrangellia Terrane and possibly Jurassic to mid-Cretaceous granitic rocks of the Coast Belt, show significantly more structure, probably an indication of the varying basement rock lithologies. The 2-D velocity model more clearly reveals the velocity layering associated with the recent sediments, Huntingdon Formation and Nanaimo Group of the southern Georgia Basin, as well as the underlying basement. We interpret lateral variation in sub-basin velocities of the 2-D model as a transition from Wrangellian to Coast Belt basement rocks. The effect of the narrow, onshore–offshore recording geometry of the seismic experiment on model resolution was tested to allow a critical assessment of the validity of the 3-D velocity model. Lateral resolution throughout the model to a depth of 3–5 km below the top of the basement is generally 10–20 km.

British Columbia↗

USGS2014

Sea-floor geology in northwestern Block Island Sound, Rhode Island

Multibeam-echosounder and sidescan-sonar data, collected by the National Oceanic and Atmospheric Administration in a 69-square-kilometer area of northwestern Block Island Sound, are used with sediment samples, and still and video photography of the sea floor, collected by the U.S. Geological Survey at 43 stations within this area, to interpret the sea-floor features and sedimentary environments. Features on the sea floor include boulders, sand waves, scour depressions, modern marine sediments, and trawl marks. Boulders, which are often several meters wide, are found in patches in the shallower depths and tend to be overgrown with sessile flora and fauna. They are lag deposits of winnowed glacial drift, and reflect high-energy environments characterized by processes associated with erosion and nondeposition. Sand waves and megaripples tend to have crests that either trend parallel to shore with 20- to 50-meter (m) wavelengths or trend perpendicular to shore with several-hundred-meter wavelengths. The sand waves reflect sediment transport directions perpendicular to shore by waves, and parallel to shore by tidal or wind-driven currents, respectively. Scour depressions, which are about 0.5 m lower than the surrounding sea floor, have floors of gravel and coarser sand than bounding modern marine sediments. These scour depressions, which are conspicuous in the sidescan-sonar data because of their more highly reflective coarser sediment floors, are likely formed by storm-generated, seaward-flowing currents and maintained by the turbulence in bottom currents caused by their coarse sediments. Areas of the sea floor with modern marine sediments tend to be relatively flat to current-rippled and sandy.

Rhode Island↗

USGS2008

Sidescan-sonar imagery and surficial geologic interpretations of the sea floor in central Rhode Island Sound

The U.S. Geological Survey (USGS) has been working with the National Oceanic and Atmospheric Administration (NOAA) to interpret the surficial geology of areas along the northeastern coast of the United States. During 2004, the NOAA Ship RUDE conducted Hydrographic Survey H11321 in Rhode Island Sound. This sidescan-sonar and bathymetry survey covers an area of 93 km? located 12 km southeast of Brenton Point, RI in water depths of 28-39 m (fig. 1). The purpose of this report is to delineate sea floor features and sedimentary environments of this area in central Rhode Island Sound using sidescan-sonar and bathymetric data from NOAA Survey H11321 and seismic-reflection data from a previous USGS field study (Needell and others, 1983a). This is important for the study of benthic habitats and provides a framework for future research. Prior work in this area includes the mapping of surface sediments and surficial geology. McMaster (1960) collected sediment samples from Rhode Island Sound and Narragansett Bay and mapped our study area as having a sandy sea floor. In addition, one sample of sand from the National Ocean Service (NOS) Hydrographic Database came from a location in the northeast part of our study area in 1939 (fig. 2; Poppe and others, 2003). McMaster and others (1968) used seismic-reflection profiles to map the locations of a cuesta of Cretaceous sediments crossing Rhode Island Sound and post-Cretaceous drainage channels. Knebel and others (1982) identified sedimentary environments in Rhode Island Sound using sidescan sonographs. Needell and others (1983b) studied the Quaternary geology and mapped the structure, sedimentary environments, and geologic hazards in Rhode Island Sound using sidescan-sonar and seismic-reflection data. Sidescan-sonar and bathymetric data from NOAA Survey H11320, which overlaps the far eastern edge of our study area, was interpreted to consist of basins surrounded by a moraine and bathymetric highs composed of till with areas of rocks, sand waves, hummocks, glaciolacustrine erosional outliers, small scarps and elongate hills (fig. 1; McMullen and others, 2007). Some of those features extend into this study area.

Rhode Island↗

USGS2007

The case for infrasound as the long-range map cue in avian navigation

Of the various 'map' and 'compass' components of Kramer's avian navigational model, the long-range map component is the least well understood. In this paper atmospheric infrasounds are proposed as the elusive longrange cues constituting the avian navigational map. Although infrasounds were considered a viable candidate for the avian map in the 1970s, and pigeons in the laboratory were found to detect sounds at surprisingly low frequencies (0.05 Hz), other tests appeared to support either of the currently favored olfactory or magnetic maps. Neither of these hypotheses, however, is able to explain the full set of observations, and the field has been at an impasse for several decades. To begin, brief descriptions of infrasonic waves and their passage through the atmosphere are given, followed by accounts of previously unexplained release results. These examples include 'release-site biases' which are deviations of departing pigeons from the homeward bearing, an annual variation in homing performance observed only in Europe, difficulties orienting over lakes and above temperature inversions, and the mysterious disruption of several pigeon races. All of these irregularities can be consistently explained by the deflection or masking of infrasonic cues by atmospheric conditions or by other infrasonic sources (microbaroms, sonic booms), respectively. A source of continuous geographic infrasound generated by atmosphere-coupled microseisms is also proposed. In conclusion, several suggestions are made toward resolving some of the conflicting experimental data with the pigeons' possible use of infrasonic cues.

Conference Paper↗

USGS2013

Temporal variability of exchange between groundwater and surface water based on high-frequency direct measurements of seepage at the sediment-water interface

Seepage at the sediment-water interface in several lakes, a large river, and an estuary exhibits substantial temporal variability when measured with temporal resolution of 1 min or less. Already substantial seepage rates changed by 7% and 16% in response to relatively small rain events at two lakes in the northeastern USA, but did not change in response to two larger rain events at a lake in Minnesota. However, seepage at that same Minnesota lake changed by 10% each day in response to withdrawals from evapotranspiration. Seepage increased by more than an order of magnitude when a seiche occurred in the Great Salt Lake, Utah. Near the head of a fjord in Puget Sound, Washington, seepage in the intertidal zone varied greatly from −115 to +217 cm d−1 in response to advancing and retreating tides when the time-averaged seepage was upward at +43 cm d−1. At all locations, seepage variability increased by one to several orders of magnitude in response to wind and associated waves. Net seepage remained unchanged by wind unless wind also induced a lake seiche. These examples from sites distributed across a broad geographic region indicate that temporal variability in seepage in response to common hydrological events is much larger than previously realized. At most locations, seepage responded within minutes to changes in surface-water stage and within minutes to hours to groundwater recharge associated with rainfall. Likely implications of this dynamism include effects on water residence time, geochemical transformations, and ecological conditions at and near the sediment-water interface.

Water Resources Research↗

USGS1994

Effects of weather and tides on feeding and flock positions of wintering redheads in the Chandeleur Sound, Louisiana

We studied the effects of weather and tides on percent feeding and flock positions of wintering redheads ( Aythya americana Eyton) in the Chandeleur Sound, Louisiana, USA. Flock scans ( n = 750) were made on 55 flocks from November through March of 1988–1989. The percent of the flock that was feeding was negatively correlated with time of day, temperature, water level, and distance of the flock from shore, and was positively correlated with wind velocity, flock size, fetch, and wave height; birds also fed more in early winter and during northerly winds. Flocks were closer to land earlier in the winter on cloudy, rainy, and windy days when waves were high, and those flocks were smaller than flocks farther from shore. Conditions associated with reduced fetch by flocks included later time of day, smaller waves, warmer air temperatures, northerly wind shifts, stronger winds, increasing cloud cover, and rain. Redheads minimized energy expenditure by foraging during low tides and in shallow water closer to shore; they increased feeding and reduced fetch during times of high thermoregulatory demands.

Louisiana↗

USGS2025

2024 Surprise Inlet landslides: Insights from a prototype landslide‐triggered tsunami monitoring system in Prince William Sound, Alaska

Alaska's coastal communities face growing landslide hazards owing to glacier retreat and extreme weather intensified by the warming climate, yet hazard monitoring remains challenging. As part of ongoing experimental monitoring in Prince William Sound, we detected three large landslides (0.5–2.3 M m 3 ) at Surprise Inlet on 20 September 2024, within the span of an hour. These events were identified in near real-time through seismic data and later confirmed using satellite imagery, tidal records, and infrasound. The landslides generated a modest tsunami, and a 4 cm wave was recorded by a tide gauge 18 km away, marking the first recorded landslide to reach water since monitoring began in this region in 2021. Here, we examine the detection and interpretation of these landslides using multiple data sources and modeling. We demonstrate the effectiveness of this regional seismic monitoring system and show how complementary instrumentation, where available, can enhance detection capabilities.

Alaska↗

USGS2020

Basin amplification effects in the Puget Lowland, Washington from strong motion recordings and 3D simulations

Sedimentary basins in the Puget Sound region, Washington State, increase ground‐motion intensity and duration of shaking during local earthquakes. We analyze Pacific Northwest Seismic Network and U.S. Geological Survey strong‐motion recordings of five local earthquakes ( M 3.9–6.8), including the 2001 Nisqually earthquake, to characterize sedimentary basin effects within the Seattle and Tacoma basins. We observe basin‐edge generated surface waves at sites within the Seattle basin for most ray paths that cross the Seattle fault zone. We also note previously undocumented basin‐edge surface waves in the Tacoma basin during one of the local earthquakes. To place quantitative constraints on basin amplification, we determine amplification factors by computing the spectral ratios of inside‐basin sites to outside‐basin sites at 1, 2, 3, and 5 s periods. Ground shaking is amplified in the Seattle basin for all the earthquakes analyzed and for a subset of events in the Tacoma basin. We find that the largest amplification factors in the Seattle basin are produced by a shallow earthquake located to the southwest of the basin. Our observation suggests that future shallow crustal and megathrust earthquakes rupturing west of the Puget Lowland will produce greater amplification within the Seattle basin than has been seen for intraslab events. We also perform ground‐motion simulations using a finite‐difference method to validate a 3D Cascadia velocity model (CVM) by comparing properties of observed and synthetic waveforms up to a frequency of 1 Hz. Basin‐edge effects are well reproduced in the Seattle basin, but are less well resolved in the Tacoma basin. Continued study of basin effects in the Tacoma basin would improve the CVM.

Washington↗

USGS1994

Map showing depth to bedrock of the Tacoma and part of the Centralia 30' x 60' quadrangles, Washington

The heavily populated Puget Sound region in the State of Washington has experienced moderate to large earthquakes in the recent past (Nuttli, 1952; Mullineaux and others, 1967). Maps showing thickness of unconsolidated sedimentary deposits are useful aids in delineating areas where damage to engineered structures can result from increased shaking resulting from these earthquakes. Basins containing thick deposits of unconsolidated materials can amplify earthquakes waves and cause far more damage to structures than the same waves passing through bedrock (Singh and others, 1988; Algermissen and others, 1985). Configurations of deep sedimentary basins can also cause reflection and magnification of earthquake waves in ways still not fully understood and presently under investigation (Frankel and Vidale, 1992).

Washington↗

USGS2013

Benthic substrate classification map: Gulf Islands National Seashore

The 2005 hurricane season was devastating for the Mississippi Gulf Coast. Hurricane Katrina caused significant degradation of the barrier islands that compose the Gulf Islands National Seashore (GUIS). Because of the ability of coastal barrier islands to help mitigate hurricane damage to the mainland, restoring these habitats prior to the onset of future storms will help protect the islands themselves and the surrounding habitats. During Hurricane Katrina, coastal barrier islands reduced storm surge by approximately 10 percent and moderated wave heights (Wamsley and others, 2009). Islands protected the mainland by preventing ocean waves from maintaining their size as they approached the mainland. In addition to storm protection, it is advantageous to restore these islands to preserve the cultural heritage present there (for example, Fort Massachusetts) and because of the influence that these islands have on marine ecology. For example, these islands help maintain a salinity regime favorable to oysters in the Mississippi Sound and provide critical habitats for many migratory birds and endangered species such as sea turtles (Chelonia mydas, Caretta caretta, and Dermochelys coriacea), Gulf sturgeon (Acipenser oxyrinchus desotoi), and piping plovers (Charadrius melodus) (U.S. Army Corps of Engineers, 2009a). As land manager for the GUIS, the National Park Service (NPS) has been working with the State of Mississippi and the Mobile District of the U.S. Army Corps of Engineers to provide a set of recommendations to the Mississippi Coastal Improvements Program (MsCIP) that will guide restoration planning. The final set of recommendations includes directly renourishing both West Ship Island (to protect Fort Massachusetts) and East Ship Island (to restore the French Warehouse archaeological site); filling Camille Cut to recreate a continuous Ship Island; and restoring natural regional sediment transport processes by placing sand in the littoral zone just east of Petit Bois Island. Prevailing sediment transport processes will provide natural renourishment of the westward islands in the barrier system (U.S. Army Corps of Engineers, 2009b). One difficulty in developing the final recommendations is that few data are available to incorporate into restoration plans related to bathymetry, sediment type, and biota. For example, the most recent bathymetry available dates to when East and West Ship Islands were a single continuous island (1917). As a result, the MsCIP program has encouraged post-hurricane bathymetric data collection for future reference. Furthermore, managing a complex environment such as this barrier island system for habitat conservation and best resource usage requires significant knowledge about those habitats and resources. To effectively address these issues, a complete and comprehensive understanding of the type, geographic extent, and condition of marine resources included within the GUIS is required. However, the data related to the GUIS marine resources are limited either spatially or temporally. Specifically, there is limited knowledge and information about the distribution of benthic habitats and the characteristics of the offshore region of the GUIS, even though these are the habitats that will be most affected by habitat restoration. The goal of this project is to develop a comprehensive map of the benthic marine habitats within the GUIS to give park managers the ability to develop strategies for coastal and ocean-resource management and to aid decisionmakers in evaluating conservation priorities.

Mississippi↗

USGS2007

Historical Shoreline Changes at Rincon, Puerto Rico, 1936-2006

The coast from Punta Higuero to Punta Cadena in Rincon, Puerto Rico is experiencing long-term erosion. This study documents historical shoreline changes at Rincon for the period 1936-2006 and constitutes a significant expansion and revision of previous work. The study area extends approximately 8 km from Punta Higuero to Punta Cadena. Fourteen historical shoreline positions were compiled from existing data, new orthophotography, and Global Positioning System (GPS) field surveys. The study area can be divided into four distinct reaches on the basis of observed erosion rates, consistent with previous work. The coast of Reach A, from Punta Higuero to the north end of the Balneario de Rincon, is fairly stable and has a long-term (70 years) average erosion rate of -0.2 ? 0.1 m/yr. The coast of Reach B, from the Balneario de Rincon to 500 m south of the mouth of Quebrada los Ramos, has an average long-term erosion rate of -1.1 ? 0.3 m/yr. The coast of Reach C, from 500 m south of the mouth of Quebrada los Ramos to Corcega, has an average long-term erosion rate of -0.4 ? 0.2 m/yr. The coast of Reach D, from Corcega to Punta Cadena, has an average long-term change rate of -0.2 ? 0.2 m/yr. Previous work (Thieler and others, 1995) identified an apparent increase in erosion rate in Reach B that probably began between 1977 and 1987. New data and statistical analysis suggest that long-term and short-term rates of shoreline change are statistically similar. Nevertheless, the coast in Reach B is eroding at a rapid and statistically significant rate that is 2 to 10 times greater than in the other three reaches. Comparison of the 1994 and 2006 GPS shoreline positions indicates the following erosion rates occurred over the past 12 years: Reach A, -0.3 ? 0.4 m/yr; Reach B, -1.0 ? 0.4 m/yr; Reach C, -0.7 ? 0.4 m/yr; and Reach D, -0.3 ? 0.4 m/yr. Thieler and others (1995) speculated that the increased erosion rate in Reach B could be attributed to the effects of marina construction in 1983 on the local sediment budget. New data and analysis suggest, however, that other factors may be equally or perhaps more important. For example, high-resolution lidar bathymetric data collected in 2001 show a complex nearshore bathymetry that may substantially affect wave refraction, diffraction, and reflection in Reach B where erosion rates are the highest. In addition, several historical photographs dating from 1951 to 2006 show a wide array of complex wave patterns that suggest the bathymetric influence on nearshore processes to be a long-term, rather than recent, phenomenon. In addition, removal of sand from the beach system may be contributing further to the elevated erosion rates in Reach B. Development of potential options for addressing coastal erosion in Rincon was beyond the scope of this study, but the data and interpretations presented here provide a sound scientific foundation for further work to identify the causes of the increased erosion and to develop strategies to mitigate its effect.

Open-File Report↗

USGS2007

Submarine slope failures near Seward, Alaska, during the M9.2 1964 earthquake

Following the 1964 M9.2 megathrust earthquake in southern Alaska, Seward was the only town hit by tsunamis generated from both submarine landslides and tectonic sources. Within 45 seconds of the start of the earthquake, a 1.2-km-long section of waterfront began sliding seaward, and soon after, ~6-8-m high waves inundated the town. Studies soon after the earthquake concluded that submarine landslides along the Seward waterfront generated the tsunamis that occurred immediately after the earthquake. We analyze pre- and post-earthquake bathymetry data to assess the location and extent of submarine mass failures and sediment transport. New NOAA multibeam bathymetry shows the morphology of the entire fjord at 15 m resolution. We also assembled all older soundings from smooth sheets for comparison to the multibeam dataset. We gridded the sounding data, applied corrections for coseismic subsidence, post-seismic rebound, unrecovered co-seismic subsidence, sea-level rise (vertical datum shift), and measurement errors. The difference grids show changes resulting from the 1964 earthquake. We estimate the total volume of slide material to be about 211 million m3. Most of this material was transported to a deep, flat area, which we refer to as “the bathtub”, about 6 to 13 km south of Seward. Sub-bottom profiling of the bathtub shows an acoustically transparent unit, which we interpret as a sediment flow deposit resulting from the submarine landslides. The scale of the submarine landslides and the distance over which sediment was transported is much larger than previously appreciated.

Alaska↗

USGS2013

Circulation exchange patterns in Sinclair Inlet, Washington

In 1994, the U.S. Geological Survey (USGS), in cooperation with the U.S. Navy, deployed three sets of moorings in Sinclair Inlet, which is a relatively small embayment on the western side of Puget Sound (fig. 1). This inlet is home to the Puget Sound Naval Shipyard. One purpose of the measurement program was to determine the transport pathways and fate of contaminants known to be present in Sinclair Inlet. Extensive descriptions of the program and the resultant information about contaminant pathways have been reported in Gartner and others (1998). This report primarily focused on the bottom boundary layer and the potential for resuspension and transport of sediments on the seabed in Sinclair Inlet as a result of tides and waves. Recently (2013), interest in transport pathways for suspended and dissolved materials in Sinclair Inlet has been rekindled. In particular, the USGS scientists in Washington and California have been asked to reexamine the datasets collected in the earlier study to refine not only our understanding of transport pathways through the inlet, but to determine how those transport pathways are affected by subtidal currents, local wind stress, and fresh water inputs. Because the prior study focused on the bottom boundary layer and not the water column, a reanalysis of the datasets could increase our understanding of the dynamic forces that drive transport within and through the inlet. However, the early datasets are limited in scope and a comprehensive understanding of these transport processes may require more extensive datasets or the development of a detailed numerical model of transport processes for the inlet, or both.

Washington↗

USGS2011

Combined multibeam and LIDAR bathymetry data from eastern Long Island Sound and westernmost Block Island Sound-A regional perspective

Detailed bathymetric maps of the sea floor in Long Island Sound are of great interest to the Connecticut and New York research and management communities because of this estuary's ecological, recreational, and commercial importance. The completed, geologically interpreted digital terrain models (DTMs), ranging in area from 12 to 293 square kilometers, provide important benthic environmental information, yet many applications require a geographically broader perspective. For example, individual surveys are of limited use for the planning and construction of cross-sound infrastructure, such as cables and pipelines, or for the testing of regional circulation models. To address this need, we integrated 12 multibeam and 2 LIDAR (Light Detection and Ranging) contiguous bathymetric DTMs, produced by the National Oceanic and Atmospheric Administration during charting operations, into one dataset that covers much of eastern Long Island Sound and extends into westernmost Block Island Sound. The new dataset is adjusted to mean lower low water, is gridded to 4-meter resolution, and is provided in UTM Zone 18 NAD83 and geographic WGS84 projections. This resolution is adequate for sea floor-feature and process interpretation but is small enough to be queried and manipulated with standard Geographic Information System programs and to allow for future growth. Natural features visible in the grid include exposed bedrock outcrops, boulder lag deposits of submerged moraines, sand-wave fields, and scour depressions that reflect the strength of the oscillating and asymmetric tidal currents. Bedform asymmetry allows interpretations of net sediment transport. Anthropogenic artifacts visible in the bathymetric data include a dredged channel, shipwrecks, dredge spoils, mooring anchors, prop-scour depressions, buried cables, and bridge footings. Together the merged data reveal a larger, more continuous perspective of bathymetric topography than previously available, providing a fundamental framework for research and resource management activities in this major east-coast estuary.

Open-File Report↗

USGS1980

High-resolution seismic-reflection profiles collected by the R/V James M. Gilliss, cruise GS 7903-4, in the Baltimore Canyon outer continental shelf area, offshore New Jersey

High-resolution seismic-reflection profiles were collected by the U.S. Geological Survey (USGS) aboard R/V JAMES M. GILLIS (cruise GS 7903-4) from 27 June to 11 July 1979 over the Continental Slope of the Eastern United States between Lindenkohl and Hudson Canyons. These data were acquired as part of a study to determine potential geologic hazards to petroleum development of the Baltimore Canyon trough area. On this cruise, the Continental Slope between Carteret and South Toms Canyons was surveyed along lines spaced one-half nautical mile apart to study the size and distribution of mass-wasting features as a guide to assess the importance of mass-wasting processes on the Continental Slope. The seimsic-reflection profiles were placed to complement other data gathered previously by the USGS and to continue a survey grid begun in 1978 aboard the R/V COLUMBUS !SELIN, cruise CI 7807-1. Track-line distances totaled 1,555 km of 40-in3 air-gun (with wave shaper) profiles, 1, 750 km of 800-J sparker data, and 1,780 km of 3 .5-kHz data. All data are of high quality. A side-scan sonar system was operated briefly along the uppermost Continental Slope to acquire data over 70 km of ship's track. In addition, experimental profiling data were collected from a hydrophone towed at depth over the midslope on the end of the side-scan cable; the surface-towed sparker was used as a sound source. High-resolution profiles were collected by this method over 105 km of track. Navigation was by Loran-C (5-minute fix interval) and satellite. The original data may be inspected at the offices of the U.S. Geological Survey in Woods Hole, Massachusetts 02543. Microfilm copies of the data from this cruise are available for purchase from the National Geophysical and Solar-Terrestrial Data Center (NGSDC), Boulder, Colorado 80303.

Open-File Report↗

USGS2010

Surficial geology of the sea floor in Long Island Sound offshore of Plum Island, New York

The U.S. Geological Survey (USGS), the Connecticut Department of Environmental Protection, and the National Oceanic and Atmospheric Administration (NOAA) have been working cooperatively to interpret surficial sea-floor geology along the coast of the Northeastern United States. NOAA survey H11445 in eastern Long Island Sound, offshore of Plum Island, New York, covers an area of about 12 square kilometers. Multibeam bathymetry and sidescan-sonar imagery from the survey, as well as sediment and photographic data from 13 stations occupied during a USGS verification cruise are used to delineate sea-floor features and characterize the environment. Bathymetry gradually deepens offshore to over 100 meters in a depression in the northwest part of the study area and reaches 60 meters in Plum Gut, a channel between Plum Island and Orient Point. Sand waves are present on a shoal north of Plum Island and in several smaller areas around the basin. Sand-wave asymmetry indicates that counter-clockwise net sediment transport maintains the shoal. Sand is prevalent where there is low backscatter in the sidescan-sonar imagery. Gravel and boulder areas are submerged lag deposits produced from the Harbor Hill-Orient Point-Fishers Island moraine segment and are found adjacent to the shorelines and just north of Plum Island, where high backscatter is present in the sidescan-sonar imagery.

Open-File Report↗

USGS2010

Sea-floor geology and character offshore of Rocky Point, New York

Open-File Report↗