Search USGS⌕ Search

SEARCH · Search USGS

Results for “Remote Sensing in Earth Systems Sciences”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources
USGS2026

Streamflow and surface-water presence data availability across the conterminous United States: A review for headwater systems

Water is essential for life on Earth, supporting ecosystems, human health, and economic activities. Hydrology relies on observational data, and this paper discusses regional and national datasets for the conterminous United States (CONUS) publicly available as of 2023, focusing on headwaters, defined as first- and second-order streams at 1:24000 scale. It identifies 72 primary and secondary datasets and 11 repositories and argues how better integration and accessibility of hydrological data can improve research. The paper distinguishes between datasets where streamflow was the primary data collection objective and those where it was secondary. This distinction highlights opportunities to consider data from efforts peripheral to hydrology but is still useful for understanding hydrologic conditions. The analysis reveals that out of about 118 000 active and inactive stream observation sites, about 6.6% and 25% are located on first- and second-order streams, respectively. This indicates a substantial data gap for headwater systems, which account for over 77% of stream length in CONUS. Federal agencies manage 72% of hydrologic monitoring sites across all stream orders, but only 34% of these are in headwater systems. Academic institutions operate about 2% of sites, with almost half (48%) in headwater systems, focusing on ecosystem research. State agencies also operate about 2% of sites, primarily on larger systems, with 19% on headwaters. Additionally, 23% of sites are managed by multiple agencies. Spatial patterns further reveal pronounced disparities among physiographic regions. Eastern and coastal provinces show relatively dense monitoring, while central and western regions show sparse coverage. These gaps reflect historical priorities, logistical constraints, funding limitations, and the high cost of continuous instrumentation. To address biases in monitoring networks, data collection could be enhanced with low-cost monitoring, community science, and remote sensing technologies. This study also notes the benefits of long-term monitoring and prioritizing retention of streamgages with longer records.

conterminous United States↗
USGS2014

Spectral masking of goethite in abandoned mine drainage systems: implications for Mars

Remote sensing studies of the surface of Mars use visible- to near-infrared (VNIR) spectroscopy to identify hydrated and hydroxylated minerals, which can be used to constrain past environmental conditions on the surface of Mars. However, due to differences in optical properties, some hydrated phases can mask others in VNIR spectra, complicating environmental interpretations. Here, we examine the role of masking in VNIR spectra of natural precipitates of ferrihydrite, schwertmannite, and goethite from abandoned mine drainage (AMD) systems in southeastern Pennsylvania. Mixtures of ferrihydrite, schwertmannite, and goethite were identified in four AMD sites by using X-ray diffractometry (XRD), and their XRD patterns compared to their VNIR spectra. We find that both ferrihydrite and schwertmannite can mask goethite in VNIR spectra of natural AMD precipitates. These findings suggest that care should be taken in interpreting environments on Mars where ferrihydrite, schwertmannite, or goethite are found, as the former two may be masking the latter. Additionally, our findings suggest that outcrops on Mars with both goethite and ferrihydrite/schwertmannite VNIR signatures may have high relative abundances of goethite, or the goethite may exist in a coarsely crystalline phase.

Pennsylvania↗
USGS2024

Increasing seasonal variation in the extent of rivers and lakes from 1984 to 2022

Knowledge of the spatial and temporal distribution of surface water is important for water resource management, flood risk assessment, monitoring ecosystem health, constraining estimates of biogeochemical cycles and understanding our climate. While global-scale spatiotemporal change detection of surface water has significantly improved in recent years due to planetary-scale remote sensing and computing, it has remained challenging to distinguish the changing characteristics of rivers and lakes. Here we analyze the spatial extent of permanent and seasonal rivers and lakes globally over the past 38 years based on new data of river system extents and surface water trends. Results show that while the total permanent surface area of both rivers and lakes has remained relatively constant, the areas with intermittent seasonal coverage have increased by 12 % and 27 % for rivers and lakes, respectively. The increase is statistically significant in over 84 % of global water catchments based on Spearman's rank correlations (rho) above 0.05 and p values less than 0.05. The seasonal river extent is nearly 32 % larger than the previously observed annual mean river extent, suggesting large seasonal variations that impact not only ecosystem health but also estimations of terrestrial biogeochemical cycles of carbon. The outcomes of our analysis are shared as the Surface Area of Rivers and Lakes (SARL) database, serving as a valuable resource for monitoring and research of hydrological cycles, ecosystem accounting, and water management.

Hydrology and Earth System Sciences↗
USGS2022

Fifty years of Landsat science and impacts

Since 1972, the Landsat program has been continually monitoring the Earth, to now provide 50 years of digital, multispectral, medium spatial resolution observations. Over this time, Landsat data were crucial for many scientific and technical advances. Prior to the Landsat program, detailed, synoptic depictions of the Earth's surface were rare, and the ability to acquire and work with large datasets was limited. The early years of the Landsat program delivered a series of technological breakthroughs, pioneering new methods, and demonstrating the ability and capacity of digital satellite imagery, creating a template for other global Earth observation missions and programs. Innovations driven by the Landsat program have paved the way for subsequent science, application, and policy support activities. The economic and scientific value of the knowledge gained through the Landsat program has been long recognized, and despite periods of funding uncertainty, has resulted in the program's 50 years of continuity, as well as substantive and ongoing improvements to payload and mission performance. Free and open access to Landsat data, enacted in 2008, was unprecedented for medium spatial resolution Earth observation data and substantially increased usage and led to a proliferation of science and application opportunities. Here, we highlight key developments over the past 50 years of the Landsat program that have influenced and changed our scientific understanding of the Earth system. Major scientific and programmatic impacts have been realized in the areas of agricultural crop mapping and water use, climate change drivers and impacts, ecosystems and land cover monitoring, and mapping the changing human footprint. The introduction of Landsat collection processing, coupled with the free and open data policy, facilitated a transition in Landsat data usage away from single images and towards time series analyses over large areas and has fostered the widespread use of science-grade data. The launch of Landsat-9 on September 27, 2021, and the advanced planning of its successor mission, Landsat-Next, underscore the sustained institutional support for the program. Such support and commitment to continuity is recognition of both the historic impact the program, and the future potential to build upon Landsat's remarkable 50-year legacy.

Remote Sensing of Environment↗
USGS2025

Global methane budget 2000-2020

Understanding and quantifying the global methane (CH 4 ) budget is important for assessing realistic pathways to mitigate climate change. CH 4 is the second most important human-influenced greenhouse gas in terms of climate forcing after carbon dioxide (CO 2 ), and both emissions and atmospheric concentrations of CH 4 have continued to increase since 2007 after a temporary pause. The relative importance of CH 4 emissions compared to those of CO 2 for temperature change is related to its shorter atmospheric lifetime, stronger radiative effect, and acceleration in atmospheric growth rate over the past decade, the causes of which are still debated. Two major challenges in quantifying the factors responsible for the observed atmospheric growth rate arise from diverse, geographically overlapping CH 4 sources and from the uncertain magnitude and temporal change in the destruction of CH 4 by short-lived and highly variable hydroxyl radicals (OH). To address these challenges, we have established a consortium of multidisciplinary scientists under the umbrella of the Global Carbon Project to improve, synthesise, and update the global CH 4 budget regularly and to stimulate new research on the methane cycle. Following Saunois et al. (2016, 2020), we present here the third version of the living review paper dedicated to the decadal CH 4 budget, integrating results of top-down CH 4 emission estimates (based on in situ and Greenhouse Gases Observing SATellite (GOSAT) atmospheric observations and an ensemble of atmospheric inverse-model results) and bottom-up estimates (based on process-based models for estimating land surface emissions and atmospheric chemistry, inventories of anthropogenic emissions, and data-driven extrapolations). We present a budget for the most recent 2010–2019 calendar decade (the latest period for which full data sets are available), for the previous decade of 2000–2009 and for the year 2020. The revision of the bottom-up budget in this 2025 edition benefits from important progress in estimating inland freshwater emissions, with better counting of emissions from lakes and ponds, reservoirs, and streams and rivers. This budget also reduces double counting across freshwater and wetland emissions and, for the first time, includes an estimate of the potential double counting that may exist (average of 23 Tg CH 4 yr −1 ). Bottom-up approaches show that the combined wetland and inland freshwater emissions average 248 [159–369] Tg CH 4 yr −1 for the 2010–2019 decade. Natural fluxes are perturbed by human activities through climate, eutrophication, and land use. In this budget, we also estimate, for the first time, this anthropogenic component contributing to wetland and inland freshwater emissions. Newly available gridded products also allowed us to derive an almost complete latitudinal and regional budget based on bottom-up approaches. For the 2010–2019 decade, global CH 4 emissions are estimated by atmospheric inversions (top-down) to be 575 Tg CH 4 yr −1 (range 553–586, corresponding to the minimum and maximum estimates of the model ensemble). Of this amount, 369 Tg CH 4 yr −1 or ∼ 65 % is attributed to direct anthropogenic sources in the fossil, agriculture, and waste and anthropogenic biomass burning (range 350–391 Tg CH 4 yr −1 or 63 %–68 %). For the 2000–2009 period, the atmospheric inversions give a slightly lower total emission than for 2010–2019, by 32 Tg CH 4 yr −1 (range 9–40). The 2020 emission rate is the highest of the period and reaches 608 Tg CH 4 yr −1 (range 581–627), which is 12 % higher than the average emissions in the 2000s. Since 2012, global direct anthropogenic CH 4 emission trends have been tracking scenarios that assume no or minimal climate mitigation policies proposed by the Intergovernmental Panel on Climate Change (shared socio-economic pathways SSP5 and SSP3). Bottom-up methods suggest 16 % (94 Tg CH 4 yr −1 ) larger global emissions (669 Tg CH 4 yr −1 , range 512–849) than top-down inversion methods for the 2010–2019 period. The discrepancy between the bottom-up and the top-down budgets has been greatly reduced compared to the previous differences (167 and 156 Tg CH 4 yr −1 in Saunois et al. (2016, 2020) respectively), and for the first time uncertainties in bottom-up and top-down budgets overlap. Although differences have been reduced between inversions and bottom-up, the most important source of uncertainty in the global CH 4 budget is still attributable to natural emissions, especially those from wetlands and inland freshwaters. The tropospheric loss of methane, as the main contributor to methane lifetime, has been estimated at 563 [510–663] Tg CH 4 yr −1 based on chemistry–climate models. These values are slightly larger than for 2000–2009 due to the impact of the rise in atmospheric methane and remaining large uncertainty ( ∼ 25 %). The total sink of CH 4 is estimated at 633 [507–796] Tg CH 4 yr −1 by the bottom-up approaches and at 554 [550–567] Tg CH 4 yr −1 by top-down approaches. However, most of the top-down models use the same OH distribution, which introduces less uncertainty to the global budget than is likely justified. For 2010–2019, agriculture and waste contributed an estimated 228 [213–242] Tg CH 4 yr −1 in the top-down budget and 211 [195–231] Tg CH 4 yr −1 in the bottom-up budget. Fossil fuel emissions contributed 115 [100–124] Tg CH 4 yr −1 in the top-down budget and 120 [117–125] Tg CH 4 yr −1 in the bottom-up budget. Biomass and biofuel burning contributed 27 [26–27] Tg CH 4 yr −1 in the top-down budget and 28 [21–39] Tg CH 4 yr −1 in the bottom-up budget. We identify five major priorities for improving the CH 4 budget: (i) producing a global, high-resolution map of water-saturated soils and inundated areas emitting CH 4 based on a robust classification of different types of emitting ecosystems; (ii) further development of process-based models for inland-water emissions; (iii) intensification of CH 4 observations at local (e.g. FLUXNET-CH 4 measurements, urban-scale monitoring, satellite imagery with pointing capabilities) to regional scales (surface networks and global remote sensing measurements from satellites) to constrain both bottom-up models and atmospheric inversions; (iv) improvements of transport models and the representation of photochemical sinks in top-down inversions; and (v) integration of 3D variational inversion systems using isotopic and/or co-emitted species such as ethane as well as information in the bottom-up inventories on anthropogenic super-emitters detected by remote sensing (mainly oil and gas sector but also coal, agriculture, and landfills) to improve source partitioning.

Earth System Science Data↗
USGS2022

Weakly supervised spatial deep learning for Earth image segmentation based on imperfect polyline labels

In recent years, deep learning has achieved tremendous success in image segmentation for computer vision applications. The performance of these models heavily relies on the availability of large-scale high-quality training labels (e.g., PASCAL VOC 2012). Unfortunately, such large-scale high-quality training data are often unavailable in many real-world spatial or spatiotemporal problems in earth science and remote sensing (e.g., mapping the nationwide river streams for water resource management). Although extensive efforts have been made to reduce the reliance on labeled data (e.g., semi-supervised or unsupervised learning, few-shot learning), the complex nature of geographic data such as spatial heterogeneity still requires sufficient training labels when transferring a pre-trained model from one region to another. On the other hand, it is often much easier to collect lower-quality training labels with imperfect alignment with earth imagery pixels (e.g., through interpreting coarse imagery by non-expert volunteers). However, directly training a deep neural network on imperfect labels with geometric annotation errors could significantly impact model performance. Existing research that overcomes imperfect training labels either focuses on errors in label class semantics or characterizes label location errors at the pixel level. These methods do not fully incorporate the geometric properties of label location errors in the vector representation. To fill the gap, this article proposes a weakly supervised learning framework to simultaneously update deep learning model parameters and infer hidden true vector label locations. Specifically, we model label location errors in the vector representation to partially reserve geometric properties (e.g., spatial contiguity within line segments). Evaluations on real-world datasets in the National Hydrography Dataset (NHD) refinement application illustrate that the proposed framework outperforms baseline methods in classification accuracy.

ACM Transactions on Intelligent Systems and Techno↗
USGS2025

From hydrated silica to quartz: Potential hydrothermal precipitates found in Jezero crater, Mars

On Earth, silica-rich phases from opal to quartz are important indicators and tracers of geological processes. Hydrated silica, such as opal, is a particularly good matrix for the preservation of molecular and macroscopic biosignatures. Cherts, a type of silica-dominated rocks, provide a unique archive of ancient terrestrial life while quartz is the emblematic mineral of the Earth's continental crust. On Mars, hydrated silica has been detected in several locations based on remote sensing and rover-based studies. In the present article we report on the detection of cobbles made of hydrated silica (opal or chalcedony), as well as well-crystallized quartz. These detections were made with the SuperCam instrument onboard Perseverance (Mars 2020 mission), using a combination of LIBS, infrared and Raman spectroscopy. Quartz-dominated stones are detected unambiguously for the first time on the Martian surface, and based on grain size and crystallinity are proposed to be of hydrothermal origin. Although these rocks were all found as float, we propose that these detections are part of a common hydrothermal system, and represent different depths / temperatures of precipitation. This attests that hydrothermal processes were active in and around Jezero crater, possibly triggered by the Jezero crater-forming impact. These silica-rich rocks, in particular opaline silica, are very promising targets for sampling and return to Earth given their high biosignature preservation potential.

Earth and Planetary Science Letters↗
USGS2013

A GIS and statistical approach to identify variables that control water quality in hydrothermally altered and mineralized watersheds, Silverton, Colorado, USA

Hydrothermally altered bedrock in the Silverton mining area, southwest Colorado, USA, contains sulfide minerals that weather to produce acidic and metal-rich leachate that is toxic to aquatic life. This study utilized a geographic information system (GIS) and statistical approach to identify watershed-scale geologic variables in the Silverton area that influence water quality. GIS analysis of mineral maps produced using remote sensing datasets including Landsat Thematic Mapper, advanced spaceborne thermal emission and reflection radiometer, and a hybrid airborne visible infrared imaging spectrometer and field-based product enabled areas of alteration to be quantified. Correlations between water quality signatures determined at watershed outlets, and alteration types intersecting both total watershed areas and GIS-buffered areas along streams were tested using linear regression analysis. Despite remote sensing datasets having varying watershed area coverage due to vegetation cover and differing mineral mapping capabilities, each dataset was useful for delineating acid-generating bedrock. Areas of quartz–sericite–pyrite mapped by AVIRIS have the highest correlations with acidic surface water and elevated iron and aluminum concentrations. Alkalinity was only correlated with area of acid neutralizing, propylitically altered bedrock containing calcite and chlorite mapped by AVIRIS. Total watershed area of acid-generating bedrock is more significantly correlated with acidic and metal-rich surface water when compared with acid-generating bedrock intersected by GIS-buffered areas along streams. This methodology could be useful in assessing the possible effects that alteration type area has in either generating or neutralizing acidity in unmined watersheds and in areas where new mining is planned.

Colorado↗
USGS2026

Understanding the resource potential of natural hydrogen on Earth: Scientific gaps, uncertainties and recommendations

A comprehensive scientific research roadmap is essential to bridge knowledge gaps and deepen the understanding of key geological, geochemical, and geophysical aspects of natural hydrogen (H 2 ) as a potential new energy resource. This paper reviews major scientific uncertainties on natural H 2 , suggesting research priorities, as a guide for defining exploration strategies, techniques, and data interpretation. The uncertainties concern all phases of the natural H 2 cycle, from generation (source rocks) through migration (advection and diffusion) and accumulation (reservoir and cap rocks) to the application and interpretation of subsurface and surface geochemical and geophysical exploration techniques. Understanding H 2 sources and generation rates (the amount of H 2 generated by a given volume of rock over time) is crucial for determining whether a geological H 2 system operates as a short-term dynamic system with rapid H 2 production and release, or as a conventional gas system with long-term accumulations, analogous to petroleum reservoirs. Preliminary estimates for serpentinisation, radiolysis, and organic matter degradation suggest that H 2 generation is not inherently fast, especially for non-hydrothermal continental systems (crystalline basement of shields, ophiolites, peridotite massifs, sedimentary basins), and long-term accumulations, like those of fossil natural gas systems, represent the most likely scenario. The mechanisms of H 2 migration through geological formations require application of fundamental principles of fluid-flow physics, distinguishing advection and diffusion, as well as their forms (from gas-phase, bubble flows to aqueous solutions). Additional studies of H 2 accumulation and retention in subsurface reservoirs could improve understanding of mechanisms of H 2 migration by focusing on the rock fluid-bearing properties and the factors affecting H 2 preservation, such as the presence of cap rocks impermeable to H 2 , pressure conditions, residence times, and microbial or abiotic consumption. Advanced techniques, including reservoir modelling, flow simulations, 3D imaging (micro-CT) of H 2 -bearing rocks, and extraction and analysis of gas occluded in rocks, can provide insights into the stability and potential recoverability of H 2 accumulations. The interpretation of surface exploration techniques, including gas geochemistry, geophysics, and remote sensing, long employed in mineral and energy resource exploration, is now being adapted for natural H 2 studies, but challenges remain in the data interpretation. Distinguishing H 2 seepage due to geological degassing from H 2 produced near the surface by modern microbial processes or artificial sources, such as hammering or drilling for soil-gas sampling, drilling into aquifers, and corrosion in boreholes, is an essential step in exploration. The simple detection of H 2 in soils, even in morphological structures like sub-circular depressions or “fairy circles”, cannot be cursorily interpreted as a signal of natural H 2 seepage from a deep source. A holistic geochemical approach, including isotopic analyses of gases associated with H 2 , is recommended to distinguish among the variety of possible H 2 origins. Observations of H 2 in wells should be interrogated to rule out possible artifacts such as corrosion and drill bit metamorphism. The integration of multiple geophysical methods, including seismic, gravimetric, magnetic, and electro-magnetic surveys, is recommended to mitigate interpretation ambiguities regarding the structure of a subsurface H 2 system (source and reservoir rocks, including fluid and gas storage), due to the non-uniqueness of rock-specific physical properties.

Earth-Science Reviews↗
USGS2022

The future of coastal monitoring through satellite remote sensing

Satellite remote sensing is transforming coastal science from a “data-poor” field into a “data-rich” field. Sandy beaches are dynamic landscapes that change in response to long-term pressures, short-term pulses, and anthropogenic interventions. Until recently, the rate and breadth of beach change have outpaced our ability to monitor those changes, due to the spatiotemporal limitations of our observational capacity. Over the past several decades, only a handful of beaches worldwide have been regularly monitored with accurate yet expensive in situ surveys. The long-term coastal-change data of these few well-monitored beaches have led to in-depth understanding of many site-specific coastal processes. However, because the best-monitored beaches are not representative of all beaches, much remains unknown about the processes and fate of the other >99% of unmonitored beaches worldwide. The fleet of Earth-observing satellites has enabled multiscale monitoring of beaches, for the very first time, by providing imagery with global coverage and up to daily frequency. The long-standing and ever-expanding archive of satellite imagery will enable coastal scientists to investigate coastal change at sites vulnerable to future sea-level rise, that is, (almost) everywhere. In the past decade, our capability to observe coastal change from space has grown substantially with computing and algorithmic power. Yet, further advances are needed in automating monitoring using machine learning, deep learning, and computer vision to fully leverage this massive treasure trove of data. Extensive monitoring and investigation of the causes and effects of coastal change at the requisite spatiotemporal scales will provide coastal managers with additional, valuable information to evaluate problems and solutions, addressing the potential for widespread beach loss due to accelerated sea-level rise, development, and reduced sediment supply. Monitoring from Earth-observing satellites is currently the only means of providing seamless data with high spatiotemporal resolution at the global scale of the impending impacts of climate change on coastal systems.

Cambridge Prisms: Coastal Futures↗
USGS2005

A magnetotelluric study of the sensitivity of an area to seismoelectric signals

During recent years, efforts at better understanding the physical properties of precursory ultra-low frequency pre-seismic electric signals (SES) have been intensified. Experiments show that SES cannot be observed at all points of the Earth's surface but only at certain so-called sensitive sites. Moreover, a sensitive site is capable of collecting SES from only a restricted number of seismic areas (selectivity effect). Tberefore the installation of a permanent station appropriate for SES collection should necessarily be preceded by a pilot study over a broad area and for a long duration. In short, a number of temporary stations are installed and, after the occurrence of several significant earthquakes (EQs) from a given seismic area, the most appropriate (if any) of these temporary stations, in the sense that they happen to collect SES, can be selected as permanent. Such a long experiment constitutes a serious disadvantage in identifying a site as SES sensitive. However, the SES sensitivity of a site should be related to the geoelectric structure of the area that hosts the site as well as the regional geoelectric structure between the station and the seismic focal area. Thus, knowledge of the local and regional geoelectric structure can dramatically reduce the time involved in identifying SES sites. hi this paper the magnetotelluric method is used to investigate the conductivity structure of an area where a permanent SES station is in operation. Although general conclusions cannot be drawn, the area surrounding an SES site near Ioannina, Greece is characterized by: (1) major faults in the vicinity; (2) highly resistive structure flanked by abrupt conductivity contrasts associated with large-scale geologic contacts, and (3) local inhomogeneities in conductivity structure. The above results are consistent with the fact that electric field amplitudes from remotely-generated signals should be appreciably stronger at such sites when compared to neighboring sites. European Geosciences Union ?? 2005 Author(s). This work is licensed under a Creative Commons License.

Natural Hazards and Earth System Sciences↗
USGS2021

DLR Earth Sensing Imaging Spectrometer (DESIS) level 1 product evaluation using RadCalNet measurements

The DLR Earth Sensing Imaging Spectrometer (DESIS) is the first hyperspectral imaging spectrometer installed in the Multi-User System for Earth Sensing (MUSES) on the International Space Station (ISS) for acquiring routine science grade images from orbit. It was launched on 29 June 2018 and integrated into MUSES. DESIS measures energy in the spectral range of 400 to 1000 nm with high spatial and spectral resolution: 30 m and 2.55 nm, respectively. DESIS data should be sufficiently quantitative and accurate to use it for different applications and research. This work performs a radiometric evaluation of DESIS Level 1 product (Top of Atmosphere (TOA) reflectance) by comparing it with coincident Radiometric Calibration Network (RadCalNet) measurements at Railroad Valley Playa (RVUS), Gobabeb (GONA), and La Crau (LCFR). RVUS, GONA, and LCFR offer 4, 15, and 5 coincident datasets between DESIS and RadCalNet measurements, respectively. The results show an agreement between DESIS and RadCalNet TOA reflectance within ~5% for most spectral regions. However, there is an additional ~5% disagreement across the wavelengths affected by water vapor absorption and atmospheric scattering. Among the three RadCalNet sites, RVUS and GONA show a similar measurement disagreement with DESIS of ~5%, while LCFR differs by ~10%. Agreement between DESIS and RadCalNet measurements is variable across all three sites, likely due to surface type differences. DESIS and RadCalNet agreement show a precision of ~2.5%, 4%, and 7% at RVUS, GONA, and LCFR, respectively. RVUS and GONA, which have a similar surface type, sand, have a similar level of radiometric accuracy and precision, whereas LCFR, which consists of sparse vegetation, has lower accuracy and precision. The observed precision of DESIS Level 1 products from all the sites, especially LCFR, can be improved with a better Bidirectional Reflection Distribution Function (BRDF) characterization of the RadCalNet sites.

Remote Sensing↗
USGS2020

Landsat 9: Empowering open science and applications through continuity

The history of Earth observation from space is well reflected through the Landsat program. With data collection beginning with Landsat-1 in 1972, the program has evolved technical capabilities while maintaining continuity of land observations. In so doing, Landsat has provided a critical reference for assessing long-term changes to Earth's land environment due to both natural and human forcing. Poised for launch in mid-2021, the joint NASA-USGS Landsat 9 mission will continue this important data record. In many respects Landsat 9 is a clone of Landsat-8. The Operational Land Imager-2 (OLI-2) is largely identical to Landsat 8 OLI, providing calibrated imagery covering the solar reflected wavelengths. The Thermal Infrared Sensor-2 (TIRS-2) improves upon Landsat 8 TIRS, addressing known issues including stray light incursion and a malfunction of the instrument scene select mirror. In addition, Landsat 9 adds redundancy to TIRS-2, thus upgrading the instrument to a 5-year design life commensurate with other elements of the mission. Initial performance testing of OLI-2 and TIRS-2 indicate that the instruments are of excellent quality and expected to match or improve on Landsat 8 data quality. Landsat-9 will maintain the current data acquisition rate of up to 740 scenes per day, with these scenes available from the Landsat archive at no cost to users. In this communication, we provide background and rationale for the Landsat 9 mission, describe the instrument payloads and ground system, and discuss data products available from the Landsat 9 mission through USGS.

Remote Sensing of Environment↗
USGS2014

Landsat TM and ETM+ thermal band calibration

Landsat-5 has been imaging the Earth since March 1984, and Landsat-7 was added to the series of Landsat instruments in April 1999. The Landsat Project Science Office and the Landsat-7 Image Assessment System have been monitoring the on-board calibration of Landsat-7 since launch. Additionally, two separate university teams have been evaluating the on-board thermal calibration of Landsat-7 through ground-based measurements since launch. Although not monitored as closely over its lifetime, a new effort is currently being made to validate the calibration of Landsat-5. Two university teams are beginning to collect ground truth under Landsat-5, along with using other vicarious calibration methods to go back into the archive to validate the history of the calibration of Landsat-5. This paper considers the calibration efforts for the thermal band, band 6, of both the Landsat-5 and Landsat-7 instruments. Though stable since launch, Landsat-7 had an initial calibration error of about 3 K, and changes were made to correct for this beginning 1 October 2000 for data processed with the National Landsat Archive Production System (NLAPS) and beginning 20 December 2000 for data processed with the Landsat Product Generation System (LPGS). Recent results from Landsat-5 vicarious calibration efforts show an offset of –0.7 K over the lifetime of the instrument. This suggests that historical calibration efforts may have been detecting errors in processing systems rather than changes in the instrument. A correction to the Landsat-5 processing has not yet been implemented but will be in the near future.

Canadian Journal of Remote Sensing↗
USGS2019

Demonstrating the value of Earth observations—methods, practical applications, and solutions—group on Earth observations side event proceedings

Executive Summary The U.S. Geological Survey, the National Oceanic and Atmospheric Administration, the European Association for Remote Sensing Companies, and the European Space Agency in coordination with the GEOValue Community hosted a side event to the Group on Earth Observations Plenary on October 23–24, 2017, in Washington, D.C. The workshop, entitled “Demonstrating the Value of Earth Observations: Methods, Practical Applications and Solutions,” brought together more than 60 international experts including economists, scientists, and engineers to consider the state of the science and applications of valuing Earth observations (EO). This 2-day workshop built upon previous activities developed under the GEOValue initiative. This workshop brought together expert analysts from multiple disciplines and backgrounds who are developing methods to identify and measure the value of information generated from the use of satellite and in-situ data. The mix of government agencies, international financial institutions, and independent consultants who participated in the workshop blended to develop a rich mix of views, approaches, and outcomes. During the first part of the workshop, the focus was on the latest science in valuing EO. A number of methodologies were described. Approaches generally assess the societal benefits of specific actions (for example, investments in EO). Some methods focus on broad measures of economic activity (for example, gross domestic product) or methods to assess total economic value such as contingent valuation surveys. Alternatively, use-case approaches (a use case is defined as an evaluation in which one or more decisions, applications, or other uses of data, information, and information products are specifically considered) start with the specific actions and how information is used to support decision making and affect outcomes. The second part of the meeting was focused on the use and development of value chains and decision trees. A value chain can be defined as the set of value-adding activities that one or more organizations perform in creating and distributing goods and services. In terms of EO, the value chain approach can be applied to consider societal benefits of the data and assess the value of data and data features. The EO value chain considers the geospatial data sources and the processing of the data into value added information to be incorporated into decision-support systems, leading to decision makers’ actions. To understand the value of EO, one would also need to recognize the demand side of the equation or how EO benefits users. Extending the value chain concept and incorporating tenets of Bayesian decision making, a decision tree would include one or more use cases. The value provided by the marginal increase in information could flow from one or several parts of the supply side of the value chain. The decision tree is based on the premise that information has no value if it is not used in at least one decision. By connecting the value chain and the decision tree, a framework is created that allows for conceptualizing the value of EO in its many uses. One can then apply economic techniques to monetize the marginal benefit of an outcome with information versus one without. A third part of the meeting applied the value chain and decision-tree frameworks to five specific thematic areas, each with the focus of using information for a decision point: Effect of increasing temperatures on human health; Flooding—Mitigating, managing, and avoiding impacts to safety and property damage; Harmful algal blooms—Effects on human health, recreation, and tourism; Energy and mineral supply—Mitigating, managing, and avoiding impacts of shortfalls on the economy; and Effects of natural hazards on transportation systems—Effects on mobility, safety, and the economy. During the working session, five separate groups worked to define and delineate the value chains and decision trees associated with each topic, discussing the related challenges and data needs. The outcomes were reported back to the full group. Because of the complexity of the topics, most groups first identified a network of value chains and then narrowed the scope to develop a single value chain to address their group’s topic. Although they worked separately and on different topics, the groups came to similar conclusions, concurring that the value chain and decision-tree frameworks are very effective for informing quantitative impact assessments and developing a relatable narrative to assist the public in understanding the link between EO and citizens.

Open-File Report↗
USGS2024

Concept of a satellite cross-calibration radiometer for in-orbit calibration of commercial optical satellites

The satellite Earth observation (EO) sector is burgeoning with hundreds of commercial satellites being launched each year, delivering a rich source of data that could be exploited for societal benefit. Data streams from the growing number of commercial satellites are of variable quality, limiting the potential for their combined use in science applications that need long time-series data from multiple sources. The quality of calibration performed on optical sensors onboard many satellite systems is highly variable due to calibration methods, sensor design, mission objective, budget, or other operational constraints. A small number of currently operating well-characterised satellite systems with onboard calibration, such as Landsat-8/9 and Sentinel-2, and planned future missions, like the NASA Climate Absolute Radiance and Refractivity Observatory (CLARREO) Pathfinder, the European Space Agency (ESA)’s Traceable Radiometry Underpinning Terrestrial and Helio Studies (TRUTHS), and LIBRA from China, are considered benchmarks for optical data quality due to their traceability to international measurement standards. This paper describes the concept of a space-based transfer calibration radiometer called the Satellite Cross-Calibration Radiometer (SCR) that would enable the calibration parameters from satellites such as Landsat-8/9, Sentinel-2, or other benchmark systems to be transferred to a range of commercial optical EO satellite systems while in orbit. A description of the key characteristics of the SCR to successfully operate in orbit and transfer calibration from reference systems to client systems is presented. A system like the SCR in orbit could complement SI-Traceable satellites (SITSats) to improve data quality and consistency and facilitate the interoperable use of data from multiple optical sensor systems for delivering higher returns on the global investment in EO.

Remote Sensing↗
USGS2024

Remote sensing large-wood storage downstream of reservoirs during and after dam removal: Elwha River, Washington, USA

Large wood is an integral part of many rivers, often defining river-corridor morphology and habitat, but its occurrence, magnitude, and evolution in a river system are much less well understood than the sedimentary and hydraulic components, and due to methodological limitations, have seldom previously been mapped in substantial detail. We present a new method for this, representing a substantial advance in automated deep-learning-based image segmentation. From these maps, we measured large wood and sediment deposits from high-resolution orthoimages to explore the dynamics of large wood in two reaches of the Elwha River, Washington, USA, between 2012 and 2017 as it adjusted to upstream dam removals. The data set consists of a time series of orthoimages (12.5-cm resolution) constructed using Structure-from-Motion photogrammetry on imagery from 14 aerial surveys. Model training was optimized to yield maximum accuracy for estimated wood areas, compared to manually digitized wood, therefore model development and intended application were coupled. These fully reproducible methods and model resulted in a maximum of 15% error between observed and estimated total wood areas and wood deposit size-distributions over the full spatio-temporal extent of the data. Areal extent of wood in the channel margin approximately doubled in the years following dam removal, with greatest increases in large wood in wider, lower-gradient sections. Large-wood deposition increased between the start of dam removal (2011) and winter 2013, then plateaued. Sediment bars continued to grow up until 2016/17, assisted by a partially static wood framework deposited predominantly during the period up to winter 2013.

Washington↗
USGS2014

Landsat-8: Science and product vision for terrestrial global change research

Landsat 8, a NASA and USGS collaboration, acquires global moderate-resolution measurements of the Earth's terrestrial and polar regions in the visible, near-infrared, short wave, and thermal infrared. Landsat 8 extends the remarkable 40 year Landsat record and has enhanced capabilities including new spectral bands in the blue and cirrus cloud-detection portion of the spectrum, two thermal bands, improved sensor signal-to-noise performance and associated improvements in radiometric resolution, and an improved duty cycle that allows collection of a significantly greater number of images per day. This paper introduces the current (2012–2017) Landsat Science Team's efforts to establish an initial understanding of Landsat 8 capabilities and the steps ahead in support of priorities identified by the team. Preliminary evaluation of Landsat 8 capabilities and identification of new science and applications opportunities are described with respect to calibration and radiometric characterization; surface reflectance; surface albedo; surface temperature, evapotranspiration and drought; agriculture; land cover, condition, disturbance and change; fresh and coastal water; and snow and ice. Insights into the development of derived ‘higher-level’ Landsat products are provided in recognition of the growing need for consistently processed, moderate spatial resolution, large area, long-term terrestrial data records for resource management and for climate and global change studies. The paper concludes with future prospects, emphasizing the opportunities for land imaging constellations by combining Landsat data with data collected from other international sensing systems, and consideration of successor Landsat mission requirements.

Remote Sensing of Environment↗