SEARCH · Search USGS

Results for “Processes”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources

USGS1982

Effects of processed oil shale on the element content of Atriplex cancescens

Samples of four-wing saltbush were collected from the Colorado State University Intensive Oil Shale Revegetation Study Site test plots in the Piceance basin, Colorado. The test plots were constructed to evaluate the effects of processed oil shale geochemistry on plant growth using various thicknesses of soil cover over the processed shale and/or over a gravel barrier between the shale and soil. Generally, the thicker the soil cover, the less the influence of the shale geochemistry on the element concentrations in the plants. Concentrations of 20 elements were larger in the ash of four-wing saltbush growing on the plot with the gravel barrier (between the soil and processed shale) when compared to the sample from the control plot. A greater water content in the soil in this plot has been reported, and the interaction between the increased, percolating water and shale may have increased the availability of these elements for plant uptake. Concentrations of boron, copper, fluorine, lithium, molybdenum, selenium, silicon, and zinc were larger in the samples grown over processed shale, compared to those from the control plot, and concentrations for barium, calcium, lanthanum, niobium, phosphorus, and strontium were smaller. Concentrations for arsenic, boron, fluorine, molybdenum, and selenium-- considered to be potential toxic contaminants--were similar to results reported in the literature for vegetation from the test plots. The copper-to-molybdenum ratios in three of the four samples of four-wing saltbush growing over the processed shale were below the ratio of 2:1, which is judged detrimental to ruminants, particularly cattle. Boron concentrations averaged 140 ppm, well above the phytotoxicity level for most plant species. Arsenic, fluorine, and selenium concentrations were below toxic levels, and thus should not present any problem for revegetation or forage use at this time.

Open-File Report↗

USGS1983

Submarine canyon and slope processes of the U.S. Atlantic continental margin

Two regions on the U.S. Atlantic continental margin were surveyed using single-channel, seismic-reflection profiling techniques: the Mid-Atlantic Continental Slope and Rise seaward of New Jersey in the vicinity of Baltimore Canyon and the Continental Slope and upper Rise just north of Cape Hatteras. Submarine canyons are the dominant morphologic feature in both areas. The Continental Slope in the Baltimore Canyon area has a general sea-floor gradient of 3?-4? and a width of approximately 40 km, whereas the study area north of Cape Hatteras has a general sea-floor gradient of approximately 9? and a width of 20 km. The dominant slope process differs in each area. In the Baltimore Canyon area, subbottom reflectors suggest that sediment deposition with progradation of the slope is related to canyon processes. In the study area north of Cape Hatteras, the canyons appear erosional and mass wasting is the dominant erosional process. Dominant slope processes appear to be correlated with the width and sea-floor gradient of the Continental Slope. Although the absolute age of the canyons is difficult to determine without rotary-drill cores for stratigraphic control, Baltimore Canyon is suggested to be older than the shelf-indenting canyon just north of Cape Hatteras. An anomalously large ridge flanking Baltimore Canyon on the upper rise appears to be related to canyon depositional and erosional processes.

Open-File Report↗

USGS1979

Environmental implications of element emissions from phosphate-processing operations in southeastern Idaho

In order to assess the contribution to plants and soils of certain elements emitted by phosphate processing, we sampled sagebrush, grasses, and A- and C-horizon soils along upwind and downwind transects at Pocatello and Soda Springs, Idaho. Analyses for 70 elements in plants showed that, statistically, the concentration of 7 environmentally important elements, cadmium, chromium, fluorine, selenium, uranium, vanadium, and zinc, were related to emissions from phosphate-processing operations. Two additional elements, lithium and nickel, show probable relationships. The literature on the effects of these elements on plant and animal health is briefly surveyed. Relations between element content in plants and distance from the phosphate-processing operations were stronger at Soda Springs than at Pocatello and, in general, stronger in sagebrush than in the grasses. Analyses for 58 elements in soils showed that, statistically, beryllium, fluorine, iron, lead, lithium, potassium, rubidium, thorium, and zinc were related to emissions only at Pocatello and only in the A horizon. Moreover, six additional elements, copper, mercury, nickel, titanium, uranium, and vanadium, probably are similarly related along the same transect. The approximate amounts of elements added to the soils by the emissions are estimated. In C-horizon soils, no statistically significant relations were observed between element concentrations and distance from the processing sites. At Soda Springs, the nonuniformity of soils at the sampling locations may have obscured the relationship between soil-element content and emissions from phosphate processing.

Professional Paper↗

USGS2010

Geochemical evolution processes and water-quality observations based on results of the National Water-Quality Assessment Program in the San Antonio segment of the Edwards aquifer, Texas, 1996-2006

As part of the National Water-Quality Assessment Program, the U.S. Geological Survey collected and analyzed groundwater samples during 1996-2006 from the San Antonio segment of the Edwards aquifer of central Texas, a productive karst aquifer developed in Cretaceous-age carbonate rocks. These National Water-Quality Assessment Program studies provide an extensive dataset of groundwater geochemistry and water quality, consisting of 249 groundwater samples collected from 136 sites (wells and springs), including (1) wells completed in the shallow, unconfined, and urbanized part of the aquifer in the vicinity of San Antonio (shallow/urban unconfined category), (2) wells completed in the unconfined (outcrop area) part of the regional aquifer (unconfined category), and (3) wells completed in and springs discharging from the confined part of the regional aquifer (confined category). This report evaluates these data to assess geochemical evolution processes, including local- and regional-scale processes controlling groundwater geochemistry, and to make water-quality observations pertaining to sources and distribution of natural constituents and anthropogenic contaminants, the relation between geochemistry and hydrologic conditions, and groundwater age tracers and travel time. Implications for monitoring water-quality trends in karst are also discussed. Geochemical and isotopic data are useful tracers of recharge, groundwater flow, fluid mixing, and water-rock interaction processes that affect water quality. Sources of dissolved constituents to Edwards aquifer groundwater include dissolution of and geochemical interaction with overlying soils and calcite and dolomite minerals that compose the aquifer. Geochemical tracers such as magnesium to calcium and strontium to calcium ratios and strontium isotope compositions are used to evaluate and constrain progressive fluid-evolution processes. Molar ratios of magnesium to calcium and strontium to calcium in groundwater typically increase along flow paths; results for samples of Edwards aquifer groundwater show an increase from shallow/urban unconfined, to unconfined, to confined groundwater categories. These differences are consistent with longer residence times and greater extents of water-rock interaction controlling fluid compositions as groundwater evolves from shallow unconfined groundwater to deeper confined groundwater. Results for stable isotopes of hydrogen and oxygen indicate specific geochemical processes affect some groundwater samples, including mixing with downdip saline water, mixing with recent recharge associated with tropical cyclonic storms, or mixing with recharge water than has undergone evaporation. The composition of surface water recharging the aquifer, as well as mixing with downdip water from the Trinity aquifer or the saline zone, also might affect water quality. A time-series record (1938-2006) of discharge at Comal Springs, one of the major aquifer discharge points, indicates an upward trend for nitrate and chloride concentrations, which likely reflects anthropogenic activities. A small number of organic contaminants were routinely or frequently detected in Edwards aquifer groundwater samples. These were the pesticides atrazine, its degradate deethylatrazine, and simazine; the drinking-water disinfection byproduct chloroform; and the solvent tetrachloroethene. Detection of these contaminants was most frequent in samples of the shallow/urban unconfined groundwater category and least frequent in samples of the unconfined groundwater category. Results indicate that the shallow/urban unconfined part of the aquifer is most affected by anthropogenic contaminants and the unconfined part of the aquifer is the least affected. The high frequency of detection for these anthropogenic contaminants aquifer-wide and in samples of deep, confined groundwater indicates that the entire aquifer is susceptible to water-quality changes as a result of anthropogenic activities. L

Texas↗

USGS2017

Efficient processing of two-dimensional arrays with C or C++

Because fast and efficient serial processing of raster-graphic images and other two-dimensional arrays is a requirement in land-change modeling and other applications, the effects of 10 factors on the runtimes for processing two-dimensional arrays with C and C++ are evaluated in a comparative factorial study. This study’s factors include the choice among three C or C++ source-code techniques for array processing; the choice of Microsoft Windows 7 or a Linux operating system; the choice of 4-byte or 8-byte array elements and indexes; and the choice of 32-bit or 64-bit memory addressing. This study demonstrates how programmer choices can reduce runtimes by 75 percent or more, even after compiler optimizations. Ten points of practical advice for faster processing of two-dimensional arrays are offered to C and C++ programmers. Further study and the development of a C and C++ software test suite are recommended. Key words : array processing, C, C++, compiler, computational speed, land-change modeling, raster-graphic image, two-dimensional array, software efficiency

Techniques and Methods↗

USGS2003

Oxidation-reduction processes in ground water at Naval Weapons Industrial Reserve Plant, Dallas, Texas

Concentrations of trichloroethene in ground water at the Naval Weapons Industrial Reserve Plant in Dallas, Texas, indicate three source areas of chlorinated solvents?building 1, building 6, and an off-site source west of the facility. The presence of daughter products of reductive dechlorination of trichloroethene, which were not used at the facility, south and southwest of the source areas are evidence that reductive dechlorination is occurring. In places south of the source areas, dissolved oxygen concentrations indicated that reduction of oxygen could be the dominant process, particularly south of building 6; but elevated dissolved oxygen concentrations south of building 6 might be caused by a leaking water or sewer pipe. The nitrite data indicate that denitrification is occurring in places; however, dissolved hydrogen concentrations indicate that iron reduction is the dominant process south of building 6. The distributions of ferrous iron indicate that iron reduction is occurring in places south-southwest of buildings 6 and 1; dissolved hydrogen concentrations generally support the interpretation that iron reduction is the dominant process in those places. The generally low concentrations of sulfide indicate that sulfate reduction is not a key process in most sampled areas, an interpretation that is supported by dissolved hydrogen concentrations. Ferrous iron and dissolved hydrogen concentrations indicate that ferric iron reduction is the primary oxidation-reduction process. Application of mean first-order decay rates in iron-reducing conditions for trichloroethene, dichloroethene, and vinyl chloride yielded half-lives for those solvents of 231, 347, and 2.67 days, respectively. Decay rates, and thus half-lives, at the facility are expected to be similar to those computed. A weighted scoring method to indicate sites where reductive dechlorination might be likely to occur indicated strong evidence for anaerobic biodegradation of chlorinated solvents at six sites. In general, scores were highest for samples collected on the northeast side of the facility.

Texas↗

USGS1995

Ground-water quality and geochemical processes at a municipal landfill, Town of Brookhaven, Long Island, New York

The principal geochemical process within a plume of leachate-contaminated ground water downgradient from the municipal landfill in the Town of Brookhaven is the oxidation of organic matter. Concurrent reducing processes are the reduction of iron and manganese oxyhydroxides to soluble ferrous and manganous forms, of nitrate and nitrite to nitrogen and ammonia, of sulfate to sulfide (sulfide precipitates from solution as iron and manganese sulfides), and, under extreme conditions, of some organic matter to methane. Secondary processes unrelated to bacterial activity and redox processes are the exchange of dissolved sodium and potassium for calcium and magnesium at ion-exchange sites and the dissolution of calcium and magnesium silicate minerals; these processes cause sodium and potassium concentrations to decrease with depth and with distance from the landfill and cause calcium, magnesium, and silica concentrations to increase.

New York↗

USGS1981

An examination of techniques for reformatting digital cartographic data/part 1: The raster-to- vector process.

Current graphic devices suitable for high-speed computer input and output of cartographic data are tending more and more to be raster-oriented, such as the rotating drum scanner and the color raster display. However, the majority of commonly used manipulative techniques in computer-assisted cartography and automated spatial data handling continue to require that the data be in vector format. This situation has recently precipitated the requirement for very fast techniques for converting digital cartographic data from raster to vector format for processing, and then back into raster format for plotting. The current article is part one of a two-part paper concerned with examining the state-of-the-art in these conversion techniques. In part one, algorithms to perform all phases of the raster-to-vector process are systematically outlined, and then compared in general terms. Examples of existing implementations of the raster-to-vector process are also described and evaluated. Part two will outline and compare algorithms to perform the reverse process, vector-to-raster conversion. Part two will also discuss raster-to-vector and vector-to-raster conversion as an integrated process.

Cartographica: The International Journal for Geogr↗

USGS2023

Sediment sources and connectivity linked to hydrologic pathways and geomorphic processes: A conceptual model to specify sediment sources and pathways through space and time

Sediment connectivity is a conceptualization for the transfer and storage of sediment among different geomorphic compartments across upland landscapes and channel networks. Sediment connectivity and dysconnectivity are linked to the water cycle and hydrologic systems with the associated multiscale interactions with climate, soil, topography, ecology, and landuse/landcover under natural variability and human intervention. We review current sediment connectivity and modeling approaches evaluating and quantifying water and sediment transfer in catchment systems. Many studies highlight the interaction between sediment and water in defining landscape connectivity, but many efforts to quantify and/or simulate sediment connectivity rely on the topographic/structural controls on sediment erosion and delivery. More recent modeling efforts integrate functional and structural connectivity to capture hydrologic properties influencing sediment delivery. Though the recent modeling development is encouraging, a comprehensive sediment connectivity framework, which integrates geomorphic and hydrologic processes across spatiotemporal scales, has not yet been accomplished. Such an effort requires understanding the hydrologic and geomorphic processes that control sediment source, storage, and transport at different spatiotemporal scales and across various geophysical conditions. We propose a path for developing this new understanding through an integrated hydrologic and sediment connectivity conceptual model that broadly categorizes dominant processes and patterns relevant to understanding sediment flux dynamics. The conceptual model describes hydrologic–sediment connectivity regimes through spatial-temporal feedback between hydrologic processes and geomorphic drivers. We propose that in combining hydrologic and sediment connectivity into a single conceptual model, patterns emerge such that catchments will exist in a single characteristic behavior at a particular instance, which would shift with space and time, and with landscape disturbances. Using the conceptual model as a “thinking” tool, we extract case studies from a multidisciplinary literature review—from hydrology, geomorphology, biogeochemistry, and watershed modeling to remote-sensing technology—that correspond to each of the dominant hydrologic–sediment connectivity regimes. Sediment and water interactions in real-world examples through various observational and modeling techniques illustrate the advancements in the spatial and temporal scales of landscape connectivity observations and simulations. The conceptual model and case studies provide a foundation for advancing the understanding and predictive capability of watershed sediment processes at multiple spatiotemporal scales. Plain language summary: Soil erosion and movement across the landscape are closely linked to rain events and flow pathways. Landscape connectivity is a way to consider how soil erosion from different parts of the landscape is connected to the streams. We explore where soil erosion occurs and how eroded soil moves across the landscape through the interaction with rainfall and drainage. The comprehensive understanding of sediment connectivity and its dependence on rainfall characteristics and watershed hydrology may help to inform the effective distribution of conservation funds and management actions to address water pollution from excess sediment.

Frontiers in Water↗

USGS2023

Evaluation of Copernicus DEM and comparison to the DEM used for Landsat collection-2 processing

Having highly accurate and reliable Digital Elevation Models (DEMs) of the Earth’s surface is critical to orthorectify Landsat imagery. Without such accuracy, pixel locations reported in the data are difficult to assure as accurate, especially in more mountainous landscapes, where the orthorectification process is the most challenging. To this end, the Landsat Calibration and Validation Team (Cal/Val) compared the Copernicus DEM (CopDEM) to the DEM that is currently used in Collection-2 processing (called “Collection-2 DEM”). NGS ground-surveyed and lidar-based ICESat-2 points were used, and the CopDEM shows improvement to be less than 1 m globally, except in Asia where the accuracy and resolution of the DEM were greater for the CopDEM compared to the Collection-2 DEM. Along with slightly improved accuracy, the CopDEM showed more consistent results globally due to its virtually seamless source and consistent creation methods throughout the dataset. While CopDEM is virtually seamless, having greater than 99% of their data coming from a single source (Tandem-X), there are significantly more voids in the higher elevations which were mostly filled with SRTM derivatives. The accuracy of the CopDEM fill imagery was also compared to the Collection-2 DEM and the results were very similar, showing that the choice of fill imagery used by CopDEM was appropriate. A qualitative assessment using terrain-corrected products processed with different DEMs and viewing them as anaglyphs to evaluate the DEMs proved useful for assessing orbital path co-registration. While the superiority of the CopDEM was not shown to be definitive by the qualitative method for many of the regions assessed, the CopDEM showed a clear advantage in Northern Russia, where the Collection-2 DEM uses some of the oldest and least accurate datasets in the compilation of the Collection-2 DEM. This paper presents results from the comparison study, along with the justification for proceeding with using the Copernicus DEM in future Landsat processing. As of this writing, the Copernicus DEM is planned to be used in Collection-3 processing, which is anticipated to be released no earlier than 2025.

Remote Sensing↗

USGS2013

Differential preservation in the geologic record of intraoceanic arc sedimentary and tectonic processes

Records of ancient intraoceanic arc activity, now preserved in continental suture zones, are commonly used to reconstruct paleogeography and plate motion, and to understand how continental crust is formed, recycled, and maintained through time. However, interpreting tectonic and sedimentary records from ancient terranes after arc–continent collision is complicated by preferential preservation of evidence for some arc processes and loss of evidence for others. In this synthesis we examine what is lost, and what is preserved, in the translation from modern processes to the ancient record of intraoceanic arcs. Composition of accreted arc terranes differs as a function of arc–continent collision geometry. ‘Forward-facing’ collision can accrete an oceanic arc on to either a passive or an active continental margin, with the arc facing the continent and colliding trench- and forearc-side first. In a ‘backward-facing’ collision, involving two subduction zones with similar polarity, the arc collides backarc-first with an active continental margin. The preservation of evidence for contemporary sedimentary and tectonic arc processes in the geologic record depends greatly on how well the various parts of the arc survive collision and orogeny in each case. Preservation of arc terranes likely is biased towards those that were in a state of tectonic accretion for tens of millions of years before collision, rather than tectonic erosion. The prevalence of tectonic erosion in modern intraoceanic arcs implies that valuable records of arc processes are commonly destroyed even before the arc collides with a continent. Arc systems are most likely to undergo tectonic accretion shortly before forward-facing collision with a continent, and thus most forearc and accretionary-prism material in ancient arc terranes likely is temporally biased toward the final stages of arc activity, when sediment flux to the trench was greatest and tectonic accretion prevailed. Collision geometry and tectonic erosion vs. accretion are important controls on the ultimate survival of material from the trench, forearc, arc massif, intra-arc basins, and backarc basins, and thus on how well an ancient arc terrane preserves evidence for tectonic processes such as subduction of aseismic ridges and seamounts, oblique plate convergence, and arc rifting. Forward-facing collision involves substantial recycling, melting, and fractionation of continent-derived material during and after collision, and so produces melts rich in silica and incompatible trace elements. As a result, forward-facing collision can drive the composition of accreted arc crust toward that of average continental crust.

Earth-Science Reviews↗

USGS2014

Forcing functions governing salt transport processes in coastal navigation canals and connectivity to surrounding marshes in South Louisiana using Houma Navigation Canal as a surrogate

Understanding how circulation and mixing processes in coastal navigation canals influence the exchange of salt between marshes and coastal ocean, and how those processes are modulated by external physical processes, is critical to anticipating effects of future actions and circumstance. Examples of such circumstances include deepening the channel, placement of locks in the channel, changes in freshwater discharge down the channel, changes in outer continental shelf (OCS) vessel traffic volume, and sea level rise. The study builds on previous BOEM-funded studies by investigating salt flux variability through the Houma Navigation Canal (HNC). It examines how external physical factors, such as buoyancy forcing and mixing from tidal stirring and OCS vessel wakes, influence dispersive and advective fluxes through the HNC and the impact of this salt flux on salinity in nearby marshes. This study quantifies salt transport processes and salinity variability in the HNC and surrounding Terrebonne marshes. Data collected for this study include time-series data of salinity and velocity in the HNC, monthly salinity-depth profiles along the length of the channel, hourly vertical profiles of velocity and salinity over multiple tidal cycles, and salinity time series data at three locations in the surrounding marshes along a transect of increasing distance from the HNC. Two modes of vertical current structure were identified. The first mode, making up 90% of the total flow field variability, strongly resembled a barotropic current structure and was coherent with alongshelf wind stress over the coastal Gulf of Mexico. The second mode was indicative of gravitational circulation and was linked to variability in tidal stirring and the longitudinal salinity gradients along the channel’s length. Diffusive process were dominant drivers of upestuary salt transport, except during periods of minimal tidal stirring when gravitational circulation became more important. Salinity in the surrounding marshes was much more responsive to salinity variations in the HNC than it was to variations in the lower Terrebonne marshes, suggesting that the HNC is the primary conduit for saltwater intrusion to the middle Terrebonne marshes. Finally, salt transport to the middle Terrebonne marshes directly associated with vessel wakes was negligible.

Louisiana↗

USGS2006

Groundwater in geologic processes, 2nd edition

Interest in the role of Groundwater in Geologic Processes has increased steadily over the past few decades. Hydrogeologists and geologists are now actively exploring the role of groundwater and other subsurface fluids in such fundamental geologic processes as crustal heat transfer, ore deposition, hydrocarbon migration, earthquakes, tectonic deformation, diagenesis, and metamorphism. Groundwater in Geologic Processes is the first comprehensive treatment of this body of inquiry. Chapters 1 to 4 develop the basic theories of groundwater motion, hydromechanics, solute transport, and heat transport. Chapter 5 applies these theories to regional groundwater flow systems in a generic sense, and Chapters 6 to 13 focus on particular geologic processes and environments. Relative to the first edition of Groundwater in Geologic Processes , this second edition includes a much more comprehensive treatment of hydromechanics (the coupling of groundwater flow and deformation). It also includes new chapters on "compaction and diagenesis," "metamorphism," and "subsea hydrogeology." Finally, it takes advantage of the substantial body of published research that has appeared since the first edition in 1998. The systematic presentation of theory and application, and the problem sets that conclude each chapter, make this book ideal for undergraduate- and graduate-level geology courses (assuming that the students have some background in calculus and introductory chemistry). It also serves as an invaluable reference for researchers and other professionals in the field

Book↗

USGS2015

PESTools – A Python toolkit for processing PEST-related information

PESTools is an open-source Python package for processing and visualizing information associated with the parameter estimation software PEST and PEST++. While PEST output can be reformatted for post- processing in spreadsheets or other menu-driven software packages, that approach can be error-prone and time-consuming. Managing information from highly parameterized models with thousands of parameters and observations presents additional challenges. PESTools consists of a set of Python object classes to facilitate efficient processing and visualization of PEST-related information. Processing and visualization of observation residuals, objective function contributions, parameter and observation sensitivities, parameter correlation and identifiability, and other common PEST outputs have been implemented. PESTools is integrated with the pyemu software package for linear-based computer model uncertainty analyses, allowing for efficient computations using the Jacobian Matrix without any external utilities or files. The use of dataframe objects (pandas Python package) facilitates rapid subsetting and querying of large datasets, as well as the incorporation of ancillary information such as observation locations, times, measurement types, and other associated information. PESTools’ object methods can be easily scripted with concise code, or alternatively, the use of IPython notebooks allows for live interaction with the information. PESTools is designed to streamline workflows and provide deeper insight into model behavior, enhance troubleshooting, and improve transparency in the calibration process.

Conference Paper↗

USGS2024

A journey to the center of the USGS National Strong-motion Project processing and beyond

The United States Geological Survey (USGS) National Strong Motion Project (NSMP) has the primary U.S. government responsibility to acquire, process, and disseminate significant strong-motion earthquake ground motion records measured at surficial free-field stations, structures (buildings, dams, and bridges, and geotechnical arrays to the earthquake engineering community. As a result of the deployment of modern seismic instrumentation and growth of tools such as web-services, earthquake data from U.S. and international seismic networks are more accessible than ever. Our mission is to provide raw and processed strong-motion waveforms with PGA values greater than 0.1%g for M3.0 earthquakes and larger in California and M4.0 and larger within the conterminous US, Hawaii, Puerto Rico, and Alaska. Datasets of interest to the engineering and geophysics communities, such as event sequences in areas of induced seismicity and significant global events, are also processed and posted at the Center for Engineering Strong Motion Data (CESMD) at strongmotioncenter.org when available through collaboration with the international strong-motion data community. Here we outline (1) the NSMP’s current workflow to acquire, process, and distribute data at CESMD; (2) our new endeavours and collaborations focusing on comparison and integration of waveform processing software, development of techniques for metadata quality checks before and after earthquakes, and construction of a dynamic site characterization repository; and (3) our topics for possible collaboration topics across the global strong-motion community.

Conference Paper↗

USGS2006

Dealing with uncertainty and sensitivity issues in process-based models of carbon and nitrogen cycles in northern forest ecosystems

Many process-based models on carbon (C) and nitrogen (N) cycles have been developed for northern forest ecosystems. These models are widely used to evaluate the long-term decisions in forest management dealing with effects like particulate pollution, productivity and climate change. Regarding climate change, one of the key questions that have sensitive political implications is whether northern forests will sequester atmospheric C or not. Whilst many process-based models have been tested for accuracy by evaluating or validating against observed data, few have dealt with the complexity of the incorporated procedures to estimate uncertainties associated with model predictions or the sensitivity of these predictions to input factors in a systematic, inter-model comparison fashion. In general, models differ in their underlying attempts to match natural complexities with assumed or imposed model structure and process formulations to estimate model parameters, to gather data and to address issues on scope, scale and natural variations. Uncertainties may originate from model structure, estimation of model parameters, data input, representation of natural variation and scaling exercises. Model structure relates to the mathematical representation of the processes modelled and the type of state variables that a model contains. The modelling of partitioning among above- and below-ground C and N pools and the interdependence among these pools remain a major source of uncertainty in model structure and error propagation. Most soil C models use at least three state variables to represent the different types of soil organic matter (SOM). This approach results in creating three artificial SOM pools, assuming that each one contains C compounds with same turnover rate. In reality, SOM consists of many different types of C compounds with widely different turnover rates. Uncertainty in data and parameter estimates are closely linked. Data uncertainties are associated with high variations in estimating forest biomass, productivity and soil organic matter and may be incomplete for model initialization, calibration, validation and sensitivity analysis of generalized predictor models. The scale at which a model is being used also affects the level of uncertainty, as the errors in the prediction of the C and N dynamics differ from the site to the landscape levels and across climatic regions. If the spatial or temporal scale of a model application is changed, additional uncertainty arises from neglecting natural variability in system variables in time and space. Uncertainty issues are also intimately related to model validation and sensitivity analysis. The estimation of uncertainties is needed to inform decision process, in order to detect the possible corridor of development. Uncertainty in this context is an essential measure of quality for stakeholder and decision makers.

Conference Paper↗

USGS2011

Multitemporal ALSM change detection, sediment delivery, and process mapping at an active earthflow

Remote mapping and measurement of surface processes at high spatial resolution is among the frontiers in Earth surface process research. Remote measurements that allow meter-scale mapping of landforms and quantification of landscape change can revolutionize the study of landscape evolution on human timescales. At Mill Gulch in northern California, USA, an active earthflow was surveyed in 2003 and 2007 by airborne laser swath mapping (ALSM), enabling meter-scale quantification of landscape change. We calculate four-year volumetric flux from the earthflow and compare it to long-term catchment average erosion rates from cosmogenic radionuclide inventories from adjacent watersheds. We also present detailed maps of changing features on the earthflow, from which we can derive velocity estimates and infer dominant process. These measurements rely on proper digital elevation model (DEM) generation and a simple surface-matching technique to align the multitemporal data in a manner that eliminates systematic error in either dataset. The mean surface elevation of the earthflow and an opposite slope that was directly influenced by the earthflow decreased 14 ± 1 mm/yr from 2003 to 2007. By making the conservative assumption that these features were the dominant contributor of sediment flux from the entire Mill Gulch drainage basin during this time interval, we calculate a minimum catchment-averaged erosion rate of 0·30 ± 0·02 mm/yr. Analysis of beryllium-10 ( 10 Be) concentrations in fluvial sand from nearby Russian Gulch and the South Fork Gualala River provide catchment averaged erosion rates of 0·21 ± 0·04 and 0·23 ± 0·03 mm/yr respectively. From translated landscape features, we can infer surface velocities ranging from 0·5 m/yr in the wide upper ‘source’ portion of the flow to 5 m/yr in the narrow middle ‘transport’ portion of the flow. This study re-affirms the importance of mass wasting processes in the sediment budgets of uplifting weak lithologies.

California↗

USGS2014

Hyporheic flow and transport processes: mechanisms, models, and biogeochemical implications

Fifty years of hyporheic zone research have shown the important role played by the hyporheic zone as an interface between groundwater and surface waters. However, it is only in the last two decades that what began as an empirical science has become a mechanistic science devoted to modeling studies of the complex fluid dynamical and biogeochemical mechanisms occurring in the hyporheic zone. These efforts have led to the picture of surface-subsurface water interactions as regulators of the form and function of fluvial ecosystems. Rather than being isolated systems, surface water bodies continuously interact with the subsurface. Exploration of hyporheic zone processes has led to a new appreciation of their wide reaching consequences for water quality and stream ecology. Modern research aims toward a unified approach, in which processes occurring in the hyporheic zone are key elements for the appreciation, management, and restoration of the whole river environment. In this unifying context, this review summarizes results from modeling studies and field observations about flow and transport processes in the hyporheic zone and describes the theories proposed in hydrology and fluid dynamics developed to quantitatively model and predict the hyporheic transport of water, heat, and dissolved and suspended compounds from sediment grain scale up to the watershed scale. The implications of these processes for stream biogeochemistry and ecology are also discussed."

Reviews of Geophysics↗