SEARCH · Search USGS

Results for “Scientific Investigations Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79Linked to original sources

USGS2015

Potentiometric surfaces and water-level trends in the Cockfield (upper Claiborne) aquifer in southern Arkansas and the Wilcox (lower Wilcox) aquifer of northeastern and southern Arkansas, 2012

The Cockfield aquifer, located in southern Arkansas, is composed of Eocene-age sand beds found near the base of the Cockfield Formation of Claiborne Group. The Wilcox aquifer, located in northeastern and southern Arkansas, is composed of Paleocene-age sand beds found in the middle to lower part of the Wilcox Group. The Cockfield and Wilcox aquifers are primary sources of groundwater. In 2010, withdrawals from the Cockfield aquifer in Arkansas totaled 19.2 million gallons per day (Mgal/d), and withdrawals from the Wilcox aquifer totaled 36.5 Mgal/d. A study was conducted by the U.S. Geological Survey in cooperation with the Arkansas Natural Resources Commission and the Arkansas Geological Survey to measure water levels associated with the Cockfield aquifer and the Wilcox aquifer in northeastern and southern Arkansas. Water levels were measured at 43 wells completed in the Cockfield aquifer and 47 wells completed in the Wilcox aquifer in February and March 2012. Measurements from 2012 are presented as potentiometric-surface maps and in combination with measurements from 2006 as water-level difference maps. Trends in water-level change over time within the Cockfield and Wilcox aquifers were determined using the water-level difference maps and selected well hydrographs. The Cockfield aquifer study area in southern Arkansas is bounded on the east by the Mississippi River and on the west by the area that contains outcrops and subcrops of the Cockfield Formation. The northern boundary of the Cockfield aquifer study area is defined by the area that contains observation wells completed in the Cockfield aquifer and the southern boundary is the Louisiana State line. The Wilcox aquifer study area in northeastern Arkansas is bounded on the east by the Mississippi River and on the north by the Missouri State line. The southern and western boundaries are defined by areas containing observation wells completed in the Wilcox aquifer or by outcrop areas on or near Crowleys Ridge. The Wilcox aquifer study area in southern Arkansas is defined by observation wells completed in the Wilcox aquifer or by areas that contain outcrops of the Wilcox Group, or both. The potentiometric-surface map of the Cockfield aquifer shows the regional direction of groundwater flow was generally toward the east-southeast, except in areas of intense groundwater withdrawals such as southwestern Ashley County, where groundwater flows toward the town of Crossett. The highest water-level altitude measured was 350 feet (ft) above National Geodetic Vertical Datum of 1929 (NGVD 29) in central Columbia County. The lowest water-level altitude measured was 40 ft above NGVD 29 in southeastern Lincoln County. The water-level difference map for the Cockfield aquifer in Arkansas was constructed using 42 water-level measurements made during 2006 and 2012. The difference in water levels for the Cockfield aquifer ranged from 27.4 ft to -10.4 ft. The largest water-level rise was in Calhoun County, and the largest water-level decline was 10.4 ft in Union County. Of the 42 wells, 13 wells had a rise in water level, and the remaining 29 wells had a decline in water level. Hydrographs for 32 wells in the Cockfield aquifer with historical water-level data were evaluated using linear regression to calculate the annual rise or decline for each well. These data were aggregated by county and statistically evaluated for the range, mean, and median of water-level change in each county. Hydrographs for Bradley, Calhoun, Chicot, Columbia, and Union Counties indicated both rising and declining water levels. The mean annual water-level rise or decline for Calhoun County was 0.00 foot per year (ft/yr) or unchanged. The mean annual water-level for Ashley, Bradley, Chicot, Cleveland, Columbia, Lincoln, and Union Counties show declines ranging from -0.02 to -1.10 ft/yr. Two potentiometric-surface maps, one for the southern area and one for the northeastern area, were constructed to show the altitude of the water surface in the Wilcox aquifer. The direction of groundwater flow in the northeastern area was generally towards the south-southwest except for some areas immediately adjacent to the Mississippi River where the flow was more eastward towards the river. The highest water-level altitude was 219 ft in northern Mississippi County, and the lowest water-level altitude was 123 ft near West Memphis in Crittenden County. The direction of groundwater flow in the northern part of the southern area was generally towards the southwest. The direction of groundwater flow in the southern part was in all directions because of two cones of depression and two water-level mounds. The highest water-level altitude measured was 394 ft at the center of a water-level mound in eastern Hot Spring County and a water-level mound in southwestern Hempstead County. The lowest water-level altitude measured was 145 ft at the center of the cone of depression in Clark County. Water-level difference maps for the Wilcox aquifer in Arkansas were constructed using 47 water-level measurements made during 2006 and 2012. The difference in water levels for the Wilcox aquifer in the northeastern area ranged from 22.0 ft to -17.9 ft. The largest rise in water level occurred in Crittenden County, and the largest decline occurred in Lee County. Twenty-one wells had rising water levels, and 10 wells had declining water levels. The difference in water levels for the Wilcox aquifer in the southern area ranged from 18.1 ft to -4.2 ft. The largest rise and the largest decline in water level occurred in Nevada County. Twelve wells had rising water levels, and 4 wells had declining water levels. Linear regression analysis of long-term hydrographs was used to determine the mean annual water-level rise and decline in the Wilcox aquifer in the northeastern and southern areas of Arkansas. In the northeastern area, the mean annual water level declined in all seven counties. The mean annual declines ranged from -0.55 ft/yr in Craighead County to -1.46 ft/yr in St. Francis County. In the southern area, the annual rise and decline calculations for wells with over 20 years of records indicate rising and declining water levels in Clark, Hot Spring, and Nevada Counties. The mean annual water level declined in all counties except Hot Spring County.

Arkansas↗

USGS2015

Preliminary methodology to assess the national and regional impact of U.S. wind energy development on birds and bats

The U.S. Geological Survey has developed a methodology to assess the impacts of wind energy development on wildlife; it is a probabilistic, quantitative assessment methodology that can communicate to decision makers and the public the magnitude of these effects on species populations. The methodology is currently applicable to birds and bats, focuses primarily on the effects of collisions, and can be applied to any species that breeds in, migrates through, or otherwise uses any part of the United States. The methodology is intended to assess species at the national scale and is fundamentally different from existing methods focusing on impacts at individual facilities. Publicly available fatality information, population estimates, species range maps, turbine location data, biological characteristics, and generic population models are used to generate both a ranked list of species based on relative risk as well as quantitative measures of the magnitude of the effect on species' population trend and size. Three metrics are combined to determine direct and indirect relative risk to populations. A generic population model is used to estimate the expected change in population trend and includes additive mortality from collisions with wind turbines. Lastly, the methodology uses observed fatalities and an estimate of potential biological removal to assess the risk of a decline in population size. Data for six bird species have been processed through the entire methodology as a test case, and the results are presented in this report. Components of the methodology are based on simplifying assumptions and require information that, for many species, may be sparse or unreliable. These assumptions are presented in the report and should be carefully considered when using output from the methodology. In addition, this methodology can be used to recommend species for more intensive demographic modeling or highlight those species that may not require any additional protection because effects of wind energy development on their populations are projected to be small.

Scientific Investigations Report↗

USGS2008

Hydrogeochemical investigation of the Standard Mine Vicinity, Upper Elk Creek Basin, Colorado

Ground- and surface-water samples were collected in the vicinity of the Standard Mine in west-central Colorado in order to characterize the local ground-water flow system, determine metal concentrations in local ground water, and better understand factors controlling the discharge of metal-rich waters from the mine. The sampling program included a one-time sampling of springs, mine adits, and exploration pits in Elk Basin and Redwell Basin; repeated sampling throughout one year of Standard Mine Level 1 discharge and Elk Creek near its confluence with Coal Creek; and a one-time sampling of underground sites in Levels 3 and 5 of the Standard Mine. Samples were analyzed for major ions and trace elements, stable isotopes of hydrogen (2H/1H) and oxygen (18O/16O), strontium isotopes, and tritium and dissolved noble gases (including helium isotopes) for tritium/helium-3 age dating. No clear correlations were observed between natural ground-water discharge locations and map-scale faults and lithology. Surface observations and the location of ground-water discharge suggest that simple topography, rather than large-scale geologic features, primarily controls the occurrence and flow of shallow ground water in Elk Basin. Discrete inflows from cross faults or other features were not observed in Levels 3 and 5 of the Standard Mine. Instead, water entered the mine as relatively persistent dripping from gouge and breccia within the Standard fault, which both tunnels follow. Therefore, the Standard fault itself is probably the main pathway of ground-water flow from the shallow subsurface to the mine workings. Low pH (as low as 3.2) and elevated concentrations of zinc, lead, cadmium, copper, and manganese (commonly exceeding water-quality standards for Elk Creek) were measured in samples located within or immediately downgradient of areas where sulfides are abundant, including the Standard fault, the Elk Lode portal, and the breccia pipe in Redwell Basin. Concentrations of these metals were typically low and pH values were circumneutral at surrounding locations. Metal concentrations in samples collected from underground workings in the Standard Mine were also generally higher than in samples collected at aboveground sites located outside of sulfide-rich areas. Metal concentrations in discharge from the Level 1 tunnel were among the highest measured in Elk Basin. All of these observations suggest that sulfide-rich mineralized rock is the primary control on dissolved metal concentrations and pH in ground water in the Standard Mine vicinity. Waste-rock piles apparently exert another major control on metal concentrations and pH; the lowest pH and highest metal concentrations typically are found in discharge from waste-rock piles. Concentrations of several chemical constituents along with strontium isotope data indicate that none of the sampled waters could have been the primary source of metals in discharge from Level 1. Therefore, this study did not identify the primary source location for metals in Level 1 discharge. Possible sources must be located below Levels 3 and 5 or farther back into the mountainside than the ends of Levels 3 and 5. Apparent tritium/helium-3 ground-water ages ranged from 0 to 9 yr, and a considerable majority were <1 yr. Tritium data and computed initial tritium values (measured tritium plus measured tritiogenic helium-3) suggest that much of the ground water in the Standard Mine vicinity was weeks to months old rather than years old. Tritium, d2H, and d18O data from water entering into and discharging from the Standard Mine displayed spatial and temporal patterns indicating that these tracers were influenced by seasonal variations in their concentration in precipitation. The tracer data therefore suggest that ground water entering into and discharging from the Standard Mine was largely composed of water <1 yr old. Pronounced seasonal variations in geochemistry in Level 1 discharge also are consistent with short r

Colorado↗

USGS2011

Hydrogeologic framework and groundwater/surface-water interactions of the Chehalis River basin, Washington

The Chehalis River has the largest drainage basin of any river entirely contained within the State of Washington with a watershed of approximately 2,700 mi 2 and has correspondingly diverse geology and land use. Demands for water resources have prompted the local citizens and governments of the Chehalis River basin to coordinate with Federal, State and Tribal agencies through the Chehalis Basin Partnership to develop a long-term watershed management plan. The recognition of the interdependence of groundwater and surface-water resources of the Chehalis River basin became the impetus for this study, the purpose of which is to describe the hydrogeologic framework and groundwater/surface-water interactions of the Chehalis River basin. Surficial geologic maps and 372 drillers' lithostratigraphic logs were used to generalize the basin-wide hydrogeologic framework. Five hydrogeologic units that include aquifers within unconsolidated glacial and alluvial sediments separated by discontinuous confining units were identified. These five units are bounded by a low permeability unit comprised of Tertiary bedrock. A water table map, and generalized groundwater-flow directions in the surficial aquifers, were delineated from water levels measured in wells between July and September 2009. Groundwater generally follows landsurface-topography from the uplands to the alluvial valley of the Chehalis River. Groundwater gradients are highest in tributary valleys such as the Newaukum River valley (approximately 23 cubic feet per mile), relatively flat in the central Chehalis River valley (approximately 6 cubic feet per mile), and become tidally influenced near the outlet of the Chehalis River to Grays Harbor. The dynamic interaction between groundwater and surface-water was observed through the synoptic streamflow measurements, termed a seepage run, made during August 2010, and monitoring of water levels in wells during the 2010 Water Year. The seepage run revealed an overall gain of 56.8 ± 23.7 cubic feet per second over 32.8 river miles (1.7 cubic feet per second per mile), and alternating gains and losses of streamflow ranging from -48.3 to 30.9 cubic feet per second per mile, which became more pronounced on the Chehalis River downstream of Grand Mound. However, most gains and losses were within measurement error. Groundwater levels measured in wells in unconsolidated sediments fluctuated with changes in stream stage, often within several hours. These fluctuations were set by precipitation events in the upper Chehalis River basin and tides of the Pacific Ocean in the lower Chehalis River basin.±

Scientific Investigations Report↗

USGS2019

Flood-inundation maps for the Yellow River from River Drive to Centerville Highway, Gwinnett County, Georgia

Digital flood-inundation maps for a 16.4-mile reach of the Yellow River in Gwinnett County, Georgia, from 0.5 mile upstream from River Drive to Centerville Highway (Georgia State Route 124) were developed to depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at two U.S. Geological Survey (USGS) streamgages in the mapped area. The maps for the 9.0-mile reach from 0.5 mile upstream from River Drive to Stone Mountain Highway (U.S. Route 78) are referenced to the streamgage Yellow River near Snellville, Ga. (station 02206500), and the maps for the 7.4-mile reach from Stone Mountain Highway to Centerville Highway are referenced to the streamgage Yellow River at Ga. 124, near Lithonia, Ga. (02207120). Real-time stage information from these streamgages can be used with these maps to estimate near real-time areas of inundation. The forecasted peak-stage information for the USGS streamgages Yellow River near Snellville, Ga. (02206500), and Yellow River at Ga. 124, near Lithonia, Ga. (02207120), can be used in conjunction with the maps developed for this study to show predicted areas of flood inundation. A one-dimensional step-backwater model was developed using the U.S. Army Corps of Engineers Hydrologic Engineering Center's River Analysis System (HEC–RAS) software for the Yellow River and was used to compute flood profiles for a 16.4-mile reach of the Yellow River. The hydraulic model was then used to simulate 16 water-surface profiles at 1.0-foot (ft) intervals at the Yellow River near Snellville streamgage and 17 water-surface profiles at 1.0-ft intervals at the Yellow River near Lithonia streamgage. At the Yellow River near Snellville streamgage, the profiles ranged from a stage of 18.0 ft, which is 819.1 ft above the North American Vertical Datum of 1988 (NAVD 88), to a stage of 33.0 ft, which is 834.1 ft above NAVD 88. At the Yellow River near Lithonia streamgage, the profiles ranged from the National Weather Service action stage of 13.0 ft, which is 732.5 ft above NAVD 88, to a stage of 29.0 ft, which is 748.5 ft above NAVD 88. The simulated water-surface profiles were then combined with a geographic information system digital elevation model—derived from light detection and ranging (lidar) data having a 5.0-ft horizontal resolution—to delineate the area flooded at each 1.0-ft interval of stream stage for both streamgages.

Georgia↗

USGS2015

Hydrogeology of the Ramapo River-Woodbury Creek valley-fill aquifer system and adjacent areas in eastern Orange County, New York

The hydrogeology of the valley-fill aquifer system and surrounding watershed areas was investigated within a 23-mile long, fault-controlled valley in eastern Orange County, New York. Glacial deposits form a divide within the valley that is drained to the north by Woodbury Creek and is drained to the south by the Ramapo River. Surficial geology, extent and saturated thickness of sand and gravel aquifers, extent of confining units, bedrock-surface elevation beneath valleys, major lineaments, and the locations of wells for which records are available were delineated on an interactive map. Currently (2013), groundwater is the primary source of water supply in the study area. Several public water-supply systems withdraw groundwater from production wells in valley areas; elsewhere, domestic wells are used for water supply. Community-supply wells tap both sand and gravel and fractured bedrock aquifers; most domestic wells tap fractured-bedrock aquifers. Thick, saturated sand and gravel deposits are limited in areal extent but form several localized, productive aquifer zones within the valley-fill sediments. Hydraulic interconnection among these zones is largely untested. Fine-grained lacustrine deposits form extensive confining units above some aquifer material. Till deposits that extend into valleys also confine sand and gravel or bedrock aquifers. The study area was divided into three sections—south, central, and north. The south section of the study area, from Harriman south to the Rockland County and New Jersey borders, includes the south-draining valleys of the Ramapo River and Summit Brook. South of the wide valley area at Harriman, the valleys are narrow and the valley-fill aquifers are largely untested; the most favorable aquifer conditions are likely at Arden and where major tributary streams enter the valley, between Southfields and We-Wah Lake. At Harriman, the Ramapo River valley fill has water-resource potential from ice-contact sand and gravel deposits. The central section of the study area encompasses the headwater drainage area of the Ramapo River, from Harriman to Monroe and Kiryas Joel. The valley-fill aquifer material is generally thin, mostly unconfined, and underlain by glacial till. Shallow production wells tap parts of this aquifer, and appear most productive when sited near surface-water bodies. Production wells in the section are frequently completed in the underlying bedrock. The north section of the study area encompasses the watershed of north-draining Woodbury Creek to just north of its confluence with Moodna Creek. The width of the valley bottom and type of valley-fill deposits vary considerably within the valley. The section likely has the greatest water-resource potential—both confined and unconfined aquifers are present and the village of Woodbury and town of Cornwall draw water supply from production wells. Aquifer potential appears most promising north of Central Valley, but several areas in this section are largely untested. Valley-fill aquifers are modest resources within the area, as indicated by the common practice of completing supply wells in the underlying bedrock rather than the overlying glacial deposits. Groundwater turbidity problems curtail use of the resource. However, additional groundwater resources have been identified by test drilling, and there are remaining untested areas. New groundwater supplies that stress localized aquifer areas will alter the groundwater flow system. Considerations include potential water-quality degradation from nearby land use(s) and, where withdrawals induce infiltration of surface-water, balancing withdrawals with flow requirements for downstream users or for maintenance of stream ecological health.

New York↗

USGS1958

Suggestions to authors of the reports of the United States Geological Survey

Knowledge acquired by the Geological Survey through programs of research and investigations has no value to the public if it remains in office files or in the minds of the scientists and engineers who did the work. The full discharge of the Survey's responsibilities is attained only by making its acquired knowledge available promptly and effectively to all people who will find it of interest and use. And, to insure effectiveness, reports must be not only accurate but so clearly and simply written that they are easy to read and understand. Efforts by the Geological Survey to attain high quality in reports are necessarily group efforts. The largest contribution is made by the author, who has assembled facts, has worked out ideas to explain them, and has a direct personal interest in making the facts and ideas clearly and effectively known. The Geological Survey encourages that interest, recognizing that it is an essential ingredient of the high morale of the members of the Survey. Authors should keep in mind, however, that the Survey has a proprietary interest in all their manuscript reports and as proprietor may dispose of the reports, or require that they be changed before publication, as it sees fit. The Survey generally exercises its proprietary interest only to the extent of seeing that a report is scientifically and technically sound, will reach the proper audience, and will reflect credit on both the Survey and the author. To these ends, each report is reviewed by the author's fellow workers, supervisors, and staff officials, who bring to bear upon it their specialized knowledge, skill, judgement to assure a sound product. In its final form each Survey report is that product of team effort in which many persons do their share -- even though most of them remain anonymous. There is no easy way to prepare reports of high quality, any more than there is an easy means of carrying out research to sure and outstanding conclusions. Each task calls for intensive thinking and for preserving work. The author bears the primary responsibility and correspondingly faces the most difficult task. To aid him is the chief purpose of this volume. The subject matter of this volume is arranged under several principal headings. First, a summary is given of the Survey's publications: the historical basis for them, statistics as to what has been issued in the periods 1879-1957, and a list and description of the several series of reports and maps in which material is being published. Next are outlined successive steps that the author will normally take from the start of a project to his final proofreading of the text and illustrations. Under the third broad heading is brought together much detailed information about the form and content of reports. The fourth part of this volume is devoted to advice on expression -- what to seek and what to avoid. A fifth major part of this volume bears on the most common questions of typographic style that affect Survey publications. The final sections of the volume give instructions for typing manuscript copy and correcting the galley and page proofs; also they include a few useful tables and a discussion of the purpose and content of press releases.

Report↗

USGS2014

Porphyry copper assessment of Central America and the Caribbean Basin

Mineral resource assessments provide a synthesis of available information about distributions of mineral deposits in the Earth’s crust. The U.S. Geological Survey prepared a probabilistic mineral resource assessment of undiscovered resources in porphyry copper deposits in Central America and the Caribbean Basin in collaboration with geoscientists from academia and the minerals industry. The purpose of the study was to (1) delineate permissive areas (tracts) for undiscovered porphyry copper deposits within 1 kilometer of the surface at a scale of 1:1,000,000; (2) provide a database of known porphyry copper deposits and significant prospects; (3) estimate numbers of undiscovered deposits within the permissive tracts; and (4) provide probabilistic estimates of amounts of copper, molybdenum, gold, and silver that could be contained in undiscovered deposits. The assessment was done using a three-part mineral resource assessment based on established mineral deposit models. Permissive tracts were delineated based primarily on distributions of mapped igneous rocks related to magmatic arcs that formed in tectonic settings associated with convergent plate margins. Five permissive tracts were delineated: the Early Cretaceous through Eocene Santiago tract, the Late Cretaceous through Oligocene Chortis tract, the Paleocene through Oligocene Darién tract, the Miocene and Pliocene Cocos tract, and the Eocene to Holocene Lesser Antilles tract. These tracts range in size from about 3,000 to about 204,000 square kilometers. Probabilistic estimates of numbers of undiscovered deposits were made for all tracts. To estimate the number of undiscovered porphyry copper deposits, data on known mineral deposits, prospects, and occurrences were considered along with mapped alteration zones, local stream-sediment geochemistry, exploration history, descriptive deposit models, and grade and tonnage models. Most porphyry copper exploration in Central America and the Caribbean Basin has focused on Panama and on the exposed Cretaceous to Eocene central Cordilleran arc that extends from Cuba and Jamaica through Haiti and the Dominican Republic to Puerto Rico and the Virgin Islands. Interest in gold has prompted exploration of historical precious-metal prospects and small mines, some of which may represent high-sulfidation epithermal systems or skarns overlying, or adjacent to, porphyry copper systems. This assessment estimated a total mean of 37 undiscovered porphyry copper deposits within the assessed permissive tracts in Central America and the Caribbean Basin. This represents more than five times the seven known deposits. Predicted mean (arithmetic) resources that could be associated with these undiscovered deposits are about 130 million metric tons of copper and about 5,200 metric tons of gold, as well as byproduct molybdenum and silver. The reported identified resources for the seven known deposits total about 39 million metric tons of copper and about 930 metric tons of gold. The assessment area is estimated to contain nearly four times as much copper and six times as much gold in undiscovered porphyry copper deposits as has been identified to date.

Scientific Investigations Report↗

USGS2005

Comparison of preconstruction and 2003 bathymetric and topographic surveys of Lake McConaughy, Nebraska

The U.S. Geological Survey, in cooperation with The Central Nebraska Public Power and Irrigation District, conducted a study that used bathymetric and topographic surveying in conjunction with Geographical Information Systems techniques to determine the 2003 physical shape, current storage capacity, and the changes in storage capacity of Lake McConaughy that have occurred over the past 62 years. By combining the bathymetric and topographic survey data, the current surface area of Lake McConaughy was determined to be 30,413.0 acres, with a volume of 1,756,300 acre-feet at the lake conservation-pool elevation of 3,266.4 feet above North American Vertical Datum of 1988 (3,265.0 feet above Central datum). To determine the changes in storage of Lake McConaughy, the 2003 survey Digital Elevation Model (DEM) was compared to a preconstruction DEM compiled from historical contour maps. This comparison showed an increase in elevation at the dam site due to the installation of Kingsley Dam. Immediately to the west of the Kingsley Dam is an area of decline where a borrow pit for Kingsley Dam was excavated. The comparison of the preconstruction survey to the 2003 survey also was used to estimate the gross storage capacity reduction that occurred between 1941 and 2002. The results of this comparison indicate a gross storage capacity reduction of approximately 42,372 acre-feet, at the lake conservation-pool elevation of 3,266.4 feet in NAVD 88 (3,265.0 feet in Central datum). By comparing preconstruction and 2003 survey data and subtracting the Kingsley Dam and borrow pit, the total estimated net volume of sediment deposited over the past 62 years is 53,347,124 cubic yards, at an annual average rate of 860,437 cubic yards per year. The approximate decrease in the net storage capacity occurring over the past 62 years is 33,066 acre-feet, at an annual average decrease of approximately 533 acre-feet per year, which has resulted in a 1.8 percent decrease in storage capacity of Lake McConaughy. The lake has accumulated most of the sediment in the original river channel and in the west end of the delta area on the upstream end of the lake.

Nebraska↗

USGS2010

Effects of groundwater levels and headwater wetlands on streamflow in the Charlie Creek basin, Peace River watershed, west-central Florida

The Charlie Creek basin was studied from April 2004 to December 2005 to better understand how groundwater levels in the underlying aquifers and storage and overflow of water from headwater wetlands preserve the streamflows exiting this least-developed tributary basin of the Peace River watershed. The hydrogeologic framework, physical characteristics, and streamflow were described and quantified for five subbasins of the 330-square mile Charlie Creek basin, allowing the contribution of its headwaters area and tributary subbasins to be separately quantified. A MIKE SHE model simulation of the integrated surface-water and groundwater flow processes in the basin was used to simulate daily streamflow observed over 21 months in 2004 and 2005 at five streamflow stations, and to quantify the monthly and annual water budgets for the five subbasins including the changing amount of water stored in wetlands. Groundwater heads were mapped in Zone 2 of the intermediate aquifer system and in the Upper Floridan aquifer, and were used to interpret the location of artesian head conditions in the Charlie Creek basin and its relation to streamflow. Artesian conditions in the intermediate aquifer system induce upward groundwater flow into the surficial aquifer and help sustain base flow which supplies about two-thirds of the streamflow from the Charlie Creek basin. Seepage measurements confirmed seepage inflow to Charlie Creek during the study period. The upper half of the basin, comprised largely of the Upper Charlie Creek subbasin, has lower runoff potential than the lower basin, more storage of runoff in wetlands, and periodically generates no streamflow. Artesian head conditions in the intermediate aquifer system were widespread in the upper half of the Charlie Creek basin, preventing downward leakage from expansive areas of wetlands and enabling them to act as headwaters to Charlie Creek once their storage requirements were met. Currently, the dynamic balance between wetland storage, rainfall-runoff processes, and groundwater-level differences in the upper basin allow it to generate approximately half of the streamflow from the Charlie Creek basin. Therefore, future development in the upper basin that would alter the hydraulic connectivity of wetlands during high flow conditions or expand recharging groundwater conditions could substantially affect streamflow in Charlie Creek. LIDAR (Light detection and ranging) based topographic maps and integrated modeling results were used to quantify the water stored in wetlands and other topographic depressions, and to describe the network of shallow stream channels connecting wetlands to Charlie Creek and its tributaries over distances of several thousand feet. Peak flows at all but one streamflow station were underpredicted in MIKE SHE simulations, possibly because the hydraulics of surface channels connecting wetlands to stream channels were not explicitly simulated in the model. Explicitly simulating the smaller channels connecting wetlands and stream channels should improve the ability of future watershed models to simulate peak flows in streams with headwater wetlands. The runoff potential was greater in the lower half of the Charlie Creek basin than in the upper half, and the streambed of Charlie Creek had greater potential to both directly gain streamflow from groundwater and lose streamflow to groundwater. Charlie Creek is more incised into the surficial aquifer in the lower basin than in the upper basin, and the streambed intersects the top of the intermediate aquifer system at two known locations. Groundwater levels in the intermediate aquifer system varied widely in the lower half of the basin from artesian conditions inducing upward flow toward the surficial aquifer and streams, to recharging conditions allowing downward flow and stream leakage. Recharge areas were greatest in May 2004 when rainfall was at a seasonal low and irrigation pumping was at a seasonal high. Recharge conditions

Scientific Investigations Report↗

USGS2025

Bathymetric contour maps, surface area and capacity tables, and bathymetric change maps for selected water-supply lakes in Missouri, 2022–23

Bathymetric data were collected at 13 water-supply lakes around the periphery of Missouri by the U.S. Geological Survey in cooperation with the Missouri Department of Natural Resources and various local agencies, as part of a multiyear effort to establish or update the surface area and capacity tables for the surveyed lakes. Surveys were carried out during the months of April and May in 2022 and 2023. All but two of the lakes had been surveyed previously by the U.S. Geological Survey, and the recent surveys were compared to the earlier surveys to document the changes in the bathymetric surface and capacity of the lake. Bathymetric data were collected using a high-resolution multibeam mapping system mounted on a boat. Supplemental depth data at three of the lakes were collected in shallow areas with an acoustic Doppler current profiler on a remote-controlled boat. Data points from the various sources were exported at a gridded data resolution appropriate to each lake, either 0.82 foot, 1.64 feet, or 3.28 feet. Data outside the multibeam survey extent and greater than the surveyed water-surface elevation were obtained from data collected using aerial light detection and ranging (lidar) point cloud data. A linear enforcement technique was used to add points to the dataset in areas of sparse data (the upper ends of coves where the water was shallow or aquatic vegetation precluded data acquisition) based on surrounding multibeam and upland data values. The various point datasets were used to produce a three-dimensional triangulated irregular network surface of the lake-bottom elevations for each lake. A surface area and capacity table was produced from the three-dimensional surface for each lake showing surface area and capacity at specified lake water-surface elevations. Various quality-assurance tests were conducted to ensure quality data were collected with the multibeam, including beam angle checks and patch tests. Additional quality-assurance tests were conducted on the gridded bathymetric data from the survey, the bathymetric surface created from the gridded data, and the contours created from the bathymetric survey.

Missouri↗

USGS2010

Groundwater conditions during 2009 and changes in groundwater levels from 1984 to 2009, Columbia Plateau Regional Aquifer System, Washington, Oregon, and Idaho

Groundwater elevations in three basalt units and one unconsolidated hydrogeologic unit in the Columbia Plateau Regional Aquifer System were measured and evaluated to provide a regional overview of groundwater conditions in spring 2009. Water levels for the Saddle Mountains unit, the Wanapum unit, the Grande Ronde unit, and for the overlying Overburden unit were measured in 1,752 wells during spring 2009 by the U.S. Geological Survey (USGS) and 10 other Federal, State, Tribal, and local agencies, including 66 wells located and measured by the USGS specifically for this study. These data were analyzed to determine the presence of spatial correlation of groundwater levels with distance and direction from each other. Groundwater flow in the Palouse Slope structural region showed evidence of being more continuous relative to groundwater flow in the Yakima Fold Belt, where the geologic complexity may contribute to compartmentalization of groundwater flow. This information was used to interpolate the generalized groundwater elevations for each of the basalt hydrogeologic units and to provide information on regional flow. Water-level change maps were constructed for the three basalt hydrogeologic units and the Overburden (unconsolidated) unit. Groundwater levels measured in spring 1984 and 2009 in 470 wells were compared. Small to moderate groundwater-level declines were measured in most wells, although declines greater than 100 ft and as great as 300 ft were measured in many wells. Essentially unchanged groundwater levels were measured in other wells. Of the wells measured in 1984 and 2009, water levels declined in 83 percent of the wells, and declines greater than 25 ft were measured in 29 percent of all wells. The groundwater-level changes were greatest in the deeper hydrogeologic units. Mean groundwater-level changes ranged from a 7 ft decline for the Overburden unit to a 51 ft decline for the Grande Ronde unit. The average annual rates of groundwater-level change for the 25-year period ranged from a 0.3 ft/yr decline for the Overburden unit to a 2.0 ft/yr decline for the Grande Ronde unit. Groundwater level declines were identified throughout the Columbia Plateau, but areas with large and widespread declines were located in the central northern part of the study area, in parts of the Yakima River basin in Washington, in the Pullman-Moscow area in Washington and Idaho, and in parts of the Umatilla River basin in Oregon. These declines are in areas known to rely heavily on groundwater for irrigation and other uses.

Idaho, Oregon, Washington↗

USGS2017

Simulation of groundwater flow in the glacial aquifer system of northeastern Wisconsin with variable model complexity

The U.S. Geological Survey, National Water-Quality Assessment seeks to map estimated intrinsic susceptibility of the glacial aquifer system of the conterminous United States. Improved understanding of the hydrogeologic characteristics that explain spatial patterns of intrinsic susceptibility, commonly inferred from estimates of groundwater age distributions, is sought so that methods used for the estimation process are properly equipped. An important step beyond identifying relevant hydrogeologic datasets, such as glacial geology maps, is to evaluate how incorporation of these resources into process-based models using differing levels of detail could affect resulting simulations of groundwater age distributions and, thus, estimates of intrinsic susceptibility. This report describes the construction and calibration of three groundwater-flow models of northeastern Wisconsin that were developed with differing levels of complexity to provide a framework for subsequent evaluations of the effects of process-based model complexity on estimations of groundwater age distributions for withdrawal wells and streams. Preliminary assessments, which focused on the effects of model complexity on simulated water levels and base flows in the glacial aquifer system, illustrate that simulation of vertical gradients using multiple model layers improves simulated heads more in low-permeability units than in high-permeability units. Moreover, simulation of heterogeneous hydraulic conductivity fields in coarse-grained and some fine-grained glacial materials produced a larger improvement in simulated water levels in the glacial aquifer system compared with simulation of uniform hydraulic conductivity within zones. The relation between base flows and model complexity was less clear; however, the relation generally seemed to follow a similar pattern as water levels. Although increased model complexity resulted in improved calibrations, future application of the models using simulated particle tracking is anticipated to evaluate if these model design considerations are similarly important for understanding the primary modeling objective - to simulate reasonable groundwater age distributions.

Wisconsin↗

USGS2011

Geologic framework and hydrogeology of the middle Carson River Basin, Eagle, Dayton, and Churchill Valleys, West-Central Nevada

Changes in land use and water use and increasing development of water resources in the middle Carson River basin may affect flow of the river and, in turn, affect downstream water users dependent on sustained river flows to Lahontan Reservoir. The U.S. Geological Survey, in cooperation with the Bureau of Reclamation, began a study in 2008 of the middle Carson River basin, extending from Eagle Valley to Churchill Valley. Various types of geologic and hydrologic data were compiled from previous studies, collected for this study, and compiled and analyzed to provide a framework for development of a numerical model of the groundwater and surface-water flow systems of the basin. Geologic units that are assumed to have similar hydrologic characteristics were grouped into hydrogeologic units comprised of consolidated rocks of pre-Cenozoic age that underlie a unit of consolidated volcanic rock and semi-consolidated sediments of Tertiary age. The principal aquifer in the study area is comprised of unconsolidated sediments of Quaternary age. The Quaternary sediments include alluvial fan, fluvial, and lake sediments, and were grouped into a basin-fill hydrogeologic unit that overlies the pre-Cenozoic and Tertiary hydrologic units. The thickness of the combined section of Tertiary volcanic and sedimentary rocks and Quaternary basin-fill deposits previously was estimated to range from zero where pre-Cenozoic rocks are exposed to greater than 10,000 feet in the Bull Canyon subbasin, and greater than 6,000 feet on the western side of Churchill Butte and beneath the Desert Mountains. The thickness of Quaternary basin-fill sediments was estimated using gravity data and lithologic descriptions from driller’s logs. The most permeable parts of basin-fill sediments are greater than 1,000 feet thick in the Carson Plains subbasin, greater than 800 feet and 600 feet thick in the western and northeastern parts of the Stagecoach subbasin, and greater than 1,000 feet and 800 feet thick in the northern and southern parts of Churchill Valley, respectively. The distribution of aquifer properties was estimated for basin-fill sediments using slug-test and aquifer test data, and the lithologic descriptions of previously mapped geologic units. Slug-test data show hydraulic conductivity is greater than 10 to greater than 100 feet per day for fluvial sediments near the flood plain, less than 10 feet per day for basin-fill sediments outside the flood plain, and less than 1 foot per day for consolidated rocks. Estimates of transmissivity exceed 20,000 feet squared per day near the Carson River in Dayton, Churchill, and western Lahontan Valleys and in the northern part of the Stagecoach subbasin, and exceed 10,000 feet squared per day in the western part of Churchill Valley. A transmissivity of 90,000 feet squared per day was estimated from results of an aquifer test in the Carson Plains subbasin, indicating that permeable gravel and cobble zones at depths greater than 400 feet supplied water to the pumping well. Estimates of specific yield ranged from less than 1 to 2 percent for most consolidated rocks, from 1 to 15 percent for semi-consolidated Tertiary sediments, and from 10 to 40 percent for unconsolidated basin-fill sediments. Water-level altitude maps based on measurements at about 300 wells in 2009 show water levels have declined as much as 70 feet since 1964 on the northwestern side of Eagle Valley, about 10 feet since 1995 near Dayton in the Carson Plains subbasin, and from 5 to 10 feet since 1982 in the western and northeastern parts of the Stagecoach subbasin and the northwestern part of Churchill Valley. The declines are likely the result of municipal and agricultural pumping. The maps show a groundwater divide between the Carson Plains and Stagecoach subbasins, and a continuous hydraulic gradient between the Stagecoach subbasin and Churchill Valley. Groundwater flow directions are uncertain beneath parts of the boundary of Churchill Valley. The altitude of the top of pre-Cenozoic rocks shows thick sections of saturated Tertiary rocks and sediments south of the Dead Camel Mountains and beneath the eastern part of the Desert Mountains through which groundwater flow between Churchill Valley, Mason Valley, and Lahontan Valley may take place. North of Lahontan reservoir, beneath the Dead Camel Mountains, and beneath the southern part of Adrian Valley, the altitude of pre-Cenozoic rocks indicates groundwater flow between the three valleys is minimal. Streamflow measurements, supported by data on the deuterium content and specific conductance of surface-water samples, indicate a loss of Carson River streamflow in the Riverview subbasin, streamflow gains in the Moundhouse subbasin and the eastern part of the Carson Plains subbasin, and streamflow losses in the Bull Canyon subbasin. Comparisons of fluctuations in groundwater levels to those in stream stage in the Carson Plains subbasin indicate that streamflow lost to infiltration from the Carson River, from irrigation ditches, and from irrigated fields is an important source of groundwater recharge. Fluctuations in groundwater levels compared with the stage of Lahontan Reservoir in Churchill Valley indicate losses to infiltration from the reservoir during high stage and groundwater seepage to the reservoir during low stage.

Nevada↗

USGS2012

Geohydrology of Big Bear Valley, California: phase 1--geologic framework, recharge, and preliminary assessment of the source and age of groundwater

The Big Bear Valley, located in the San Bernardino Mountains of southern California, has increased in population in recent years. Most of the water supply for the area is pumped from the alluvial deposits that form the Big Bear Valley groundwater basin. This study was conducted to better understand the thickness and structure of the groundwater basin in order to estimate the quantity and distribution of natural recharge to Big Bear Valley. A gravity survey was used to estimate the thickness of the alluvial deposits that form the Big Bear Valley groundwater basin. This determined that the alluvial deposits reach a maximum thickness of 1,500 to 2,000 feet beneath the center of Big Bear Lake and the area between Big Bear and Baldwin Lakes, and decrease to less than 500 feet thick beneath the eastern end of Big Bear Lake. Interferometric Synthetic Aperture Radar (InSAR) was used to measure pumping-induced land subsidence and to locate structures, such as faults, that could affect groundwater movement. The measurements indicated small amounts of land deformation (uplift and subsidence) in the area between Big Bear Lake and Baldwin Lake, the area near the city of Big Bear Lake, and the area near Sugarloaf, California. Both the gravity and InSAR measurements indicated the possible presence of subsurface faults in subbasins between Big Bear and Baldwin Lakes, but additional data are required for confirmation. The distribution and quantity of groundwater recharge in the area were evaluated by using a regional water-balance model (Basin Characterization Model, or BCM) and a daily rainfall-runoff model (INFILv3). The BCM calculated spatially distributed potential recharge in the study area of approximately 12,700 acre-feet per year (acre-ft/yr) of potential in-place recharge and 30,800 acre-ft/yr of potential runoff. Using the assumption that only 10 percent of the runoff becomes recharge, this approach indicated there is approximately 15,800 acre-ft/yr of total recharge in Big Bear Valley. The INFILv3 model was modified for this study to include a perched zone beneath the root zone to better simulate lateral seepage and recharge in the shallow subsurface in mountainous terrain. The climate input used in the INFILv3 model was developed by using daily climate data from 84 National Climatic Data Center stations and published Parameter Regression on Independent Slopes Model (PRISM) average monthly precipitation maps to match the drier average monthly precipitation measured in the Baldwin Lake drainage basin. This model resulted in a good representation of localized rain-shadow effects and calibrated well to measured lake volumes at Big Bear and Baldwin Lakes. The simulated average annual recharge was about 5,480 acre-ft/yr in the Big Bear study area, with about 2,800 acre-ft/yr in the Big Bear Lake surface-water drainage basin and about 2,680 acre-ft/yr in the Baldwin Lake surface-water drainage basin. One spring and eight wells were sampled and analyzed for chemical and isotopic data in 2005 and 2006 to determine if isotopic techniques could be used to assess the sources and ages of groundwater in the Big Bear Valley. This approach showed that the predominant source of recharge to the Big Bear Valley is winter precipitation falling on the surrounding mountains. The tritium and uncorrected carbon-14 ages of samples collected from wells for this study indicated that the groundwater basin contains water of different ages, ranging from modern to about 17,200-years old.The results of these investigations provide an understanding of the lateral and vertical extent of the groundwater basin, the spatial distribution of groundwater recharge, the processes responsible for the recharge, and the source and age of groundwater in the groundwater basin. Although the studies do not provide an understanding of the detailed water-bearing properties necessary to determine the groundwater availability of the basin, they do provide a framework for the future development of a groundwater model that would help to improve the understanding of the potential hydrologic effects of water-management alternatives in Big Bear Valley.

California↗

USGS2004

Status of water levels and selected water-quality conditions in the Sparta-Memphis aquifer in Arkansas and the Sparta aquifer in Louisiana, spring-summer 2001

During the spring of 2001, water levels were measured in 427 wells in the Sparta-Memphis aquifer in Arkansas and the Sparta aquifer in Louisiana. Water-quality samples were collected for temperature and specific-conductance measurements during the spring and summer of 2001 from 150 wells in Arkansas in the Sparta-Memphis aquifer. Dissolved chloride samples were collected and analyzed for 87 of the 150 wells. Water-quality samples were not collected in Louisiana. Maps of areal distribution of potentiometric surface, difference in water-level measurements from 1997 to 2001, and specific conductance generated from these data reveal spatial trends across the study area. The highest water-level altitude measured in Arkansas was 328 feet above National Geodetic Vertical Datum of 1929 (NGVD of 1929) in Grant County; the lowest water-level altitude was 197 feet below NGVD of 1929 in Union County. The highest water-level altitude measured in Louisiana was 235 feet above NGVD of 1929 in Bienville Parish; the lowest water-level altitude was 218 feet below NGVD of 1929 in Ouachita Parish. The regional direction of ground-water flow in the Sparta-Memphis aquifer in Arkansas generally is to the south-southwest in the northern half of Arkansas and to the east and south in the southern half of Arkansas; the ground-water flow in the Sparta aquifer in northern Louisiana generally is in an easterly direction toward the Mississippi River. Four cones of depression are shown in the 2001 potentiometric-surface map, centered in Columbia, Jefferson, and Union Counties in Arkansas and Ouachita Parish in Louisiana as a result of large withdrawals for industrial and public supplies. A broad depression exists in western Poinsett, Cross, and St. Francis Counties in Arkansas. A map for water-level changes from 1997 to 2001 was constructed using water-level measurements from 278 wells. The largest rise in water level measured in Arkansas was about 35 feet in Prairie County. The largest decline in water level measured in Arkansas was about 93 feet in Columbia County. The largest rise in water level measured in Louisiana was about 23 feet in Jackson Parish. The largest decline in water level measured in Louisiana was about 33 feet in Claiborne Parish. Hydrographs were constructed for wells with a minimum of 25 years of water-level measurements. A trend line using a linear regression was calculated for the period of record from spring of 1976 to spring of 2001 to determine the annual decline or rise in feet per year for water levels in each well. The hydrographs were grouped by county or parish. The median values for county and parish annual water-level decline or rise ranged from -1.57 to 0.29 foot per year. Specific conductance ranged from 16.8 microsiemens per centimeter at 25 degrees Celsius in Ouachita County to about 1,470 microsiemens per centimeter at 25 degrees Celsius in Lee County. The median specific conductance was 340 microsiemens per centimeter at 25 degrees Celsius. Dissolved chloride concentrations ranged from 1.4 milligrams per liter at a well in Lincoln County to 250 milligrams per liter at a well in Lee County. The median dissolved chloride concentration was 7.7 milligrams per liter.

Scientific Investigations Report↗

USGS2018

Flood-inundation and flood-mitigation modeling of the West Branch Wapsinonoc Creek Watershed in West Branch, Iowa

The U.S. Geological Survey (USGS) in cooperation with the city of West Branch and the Herbert Hoover National Historic Site of the National Park Service assessed flood-mitigation scenarios within the West Branch Wapsinonoc Creek watershed. The scenarios are intended to demonstrate several means of decreasing peak streamflows and improving the conveyance of overbank flows from the West Branch Wapsinonoc Creek and its tributary Hoover Creek where they flow through the city and the Herbert Hoover National Historic Site located within the city. Hydrologic and hydraulic models of the watershed were constructed to assess the flood-mitigation scenarios. To accomplish this, the models used the U.S. Army Corps of Engineers Hydrologic Engineering Center-Hydrologic Modeling System (HEC–HMS) version 4.2 to simulate the amount of runoff and streamflow produced from single rain events. The Hydrologic Engineering Center-River Analysis System (HEC–RAS) version 5.0 was then used to construct an unsteady-state model that may be used for routing streamflows, mapping areas that may be inundated during floods, and simulating the effects of different measures taken to decrease the effects of floods on people and infrastructure. Both models were calibrated to three historic rainfall events that produced peak streamflows ranging between the 2-year and 10-year flood-frequency recurrence intervals at the USGS streamgage (05464942) on Hoover Creek. The historic rainfall events were calibrated by using data from two USGS streamgages along with surveyed high-water marks from one of the events. The calibrated HEC–HMS model was then used to simulate streamflows from design rainfall events of 24-hour duration ranging from a 20-percent to a 1-percent annual exceedance probability. These simulated streamflows were incorporated into the HEC–RAS model. The unsteady-state HEC–RAS model was calibrated to represent existing conditions within the watershed. HEC–RAS model simulations with the existing conditions and streamflows from the design rainfall events were then done to serve as a baseline for evaluating flood-mitigation scenarios. After these simulations were completed, three different flood-mitigation scenarios were developed with HEC–RAS: a detention-storage scenario, a conveyance improvement scenario, and a combination of both. In the detention-storage scenario, four in-channel detention structures were placed upstream from the city of West Branch to attenuate peak streamflows. To investigate possible improvements to conveying floodwaters through the city of West Branch, a section of abandoned railroad embankment and an old truss bridge were removed in the model, because these structures were producing backwater areas during flooding events. The third scenario combines the detention and conveyance scenarios so their joint efficiency could be evaluated. The scenarios with the design rainfall events were run in the HEC–RAS model so their flood-mitigation effects could be analyzed across a wide range of flood magnitudes.

Iowa↗

USGS2007

The Black Mountain tectonic zone--a reactivated northeast-trending crustal shear zone in the Yukon-Tanana Upland of east-central Alaska: Chapter D in Recent U.S. Geological Survey studies in the Tintina Gold Province, Alaska, United States, and Yukon, Canada--results of a 5-year project

The Black Mountain tectonic zone in the YukonTanana terrane of east-central Alaska is a belt of diverse northeast-trending geologic features that can been traced across Black Mountain in the southeast corner of the Big Delta 1°×3° degree quadrangle. Geologic mapping in the larger scale B1 quadrangle of the Big Delta quadrangle, in which Black Mountain is the principal physiographic feature, has revealed a continuous zone of normal and left-lateral strikeslip high-angle faults and shear zones, some of which have late Tertiary to Quaternary displacement histories. The tectonic zone includes complexly intruded wall rocks and intermingled apophyses of the contiguous mid-Cretaceous Goodpaster and Mount Harper granodioritic plutons, mafic to intermediate composite dike swarms, precious metal mineralization, early Tertiary volcanic activity and Quaternary fault scarps. These structures define a zone as much as 6 to 13 kilometers (km) wide and more than 40 km long that can be traced diagonally across the B1 quadrangle into the adjacent Eagle 1°×3° quadrangle to the east. Recurrent activity along the tectonic zone, from at least mid-Cretaceous to Quaternary, suggests the presence of a buried, fundamental tectonic feature beneath the zone that has influenced the tectonic development of this part of the Yukon-Tanana terrane. The tectonic zone, centered on Black Mountain, lies directly above a profound northeast-trending aeromagnetic anomaly between the Denali and Tintina fault systems. The anomaly separates moderate to strongly magnetic terrane on the northwest from a huge, weakly magnetic terrane on the southeast. The tectonic zone is parallel to the similarly oriented left-lateral, strike-slip Shaw Creek fault zone 85 km to the west.

Alaska;Yukon↗