Search USGS⌕ Search

SEARCH · Search USGS

Results for “Water Resource Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78Linked to original sources
USGS1990

Computerized stratified random site-selection approaches for design of a ground-water-quality sampling network

Computer software was written to randomly select sites for a ground-water-quality sampling network. The software uses digital cartographic techniques and subroutines from a proprietary geographic information system. The report presents the approaches, computer software, and sample applications. It is often desirable to collect ground-water-quality samples from various areas in a study region that have different values of a spatial characteristic, such as land-use or hydrogeologic setting. A stratified network can be used for testing hypotheses about relations between spatial characteristics and water quality, or for calculating statistical descriptions of water-quality data that account for variations that correspond to the spatial characteristic. In the software described, a study region is subdivided into areal subsets that have a common spatial characteristic to stratify the population into several categories from which sampling sites are selected. Different numbers of sites may be selected from each category of areal subsets. A population of potential sampling sites may be defined by either specifying a fixed population of existing sites, or by preparing an equally spaced population of potential sites. In either case, each site is identified with a single category, depending on the value of the spatial characteristic of the areal subset in which the site is located. Sites are selected from one category at a time. One of two approaches may be used to select sites. Sites may be selected randomly, or the areal subsets in the category can be grouped into cells and sites selected randomly from each cell.

Water-Resources Investigations Report↗
USGS1995

Computation of bedrock-aquifer recharge in northern Westchester County, New York, and chemical quality of water from selected bedrock wells

An empirical technique was used to calculate the recharge to bedrock aquifers in northern Westchester County. This method requires delineation of ground-water divides within the aquifer area and values for (1) the extent of till and exposed bedrock within the aquifer area, and (2) mean annual runoff. This report contains maps and data needed for calculation of recharge in any given area within the 165square-mile study area. Recharge was computed by this technique for a 93-square-mile part of the study area and used a ground-water-flow model to evaluate the reliability of the method. A two-layer, steady-state model of the selected area was calibrated. The area consists predominantly of bedrock overlain by small localized deposits of till and stratified drill Ground-water-level and streamflow data collected in mid-November 1987 were used for model calibration. The data set approximates average annual conditions. The model was calibrated from (1) estimates of recharge as computed through the empirical technique, and (2) a range of values for hydrologic properties derived from aquifer tests and published literature. Recharge values used for model simulation appear to be reasonable for average steady-state conditions. Water-quality data were collected from 53 selected bedrock wells throughout northern Westchester County to define the background ground-water quality. The constituents and properties for which samples were analyzed included major cations and anions, temperature, pH, specific conductance, and hardness. Results indicate little difference in water quality among the bedrock aquifers within the study area. Ground water is mainly the calcium-bicarbonate type and is moderately hard. Average concentrations of sodium, sulfate, chloride, nitrate, iron, and manganese were within acceptable limits established by the U.S. Environmental Protection Agency for domestic water supply.

Water-Resources Investigations Report↗
USGS2002

Hurricane Mitch: Peak Discharge for Selected River Reachesin Honduras

Hurricane Mitch began as a tropical depression in the Caribbean Sea on 22 October 1998. By 26 October, Mitch had strengthened to a Category 5 storm as defined by the Saffir-Simpson Hurricane Scale (National Climate Data Center, 1999a), and on 27 October was threatening the northern coast of Honduras (fig. 1). After making landfall 2 days later (29 October), the storm drifted south and west across Honduras, wreaking destruction throughout the country before reaching the Guatemalan border on 31 October. According to the National Climate Data Center of the National Oceanic and Atmospheric Administration (National Climate Data Center, 1999b), Hurricane Mitch ranks among the five strongest storms on record in the Atlantic Basin in terms of its sustained winds, barometric pressure, and duration. Hurricane Mitch also was one of the worst Atlantic storms in terms of loss of life and property. The regionwide death toll was estimated to be more than 9,000; thousands of people were reported missing. Economic losses in the region were more than $7.5 billion (U.S. Agency for International Development, 1999). Honduras suffered the most widespread devastation during the storm. More than 5,000 deaths, and economic losses of more than $4 billion, were reported by the Government of Honduras. Honduran officials estimated that Hurricane Mitch destroyed 50 years of economic development. In addition to the human and economic losses, intense flooding and landslides scarred the Honduran landscape - hydrologic and geomorphologic processes throughout the country likely will be affected for many years. As part of the U.S. Government's response to the disaster, the U.S. Geological Survey (USGS) conducted post-flood measurements of peak discharge at 16 river sites throughout Honduras (fig. 2). Such measurements, termed 'indirect' measurements, are used to determine peak flows when direct measurements (using current meters or dye studies, for example) cannot be made. Indirect measurements of peak discharge are based on post-flood surveys of the river channel (observed high-water marks, cross sections, and hydraulic properties) and model computation of peak discharge. Determination of the flood peaks associated with Hurricane Mitch will help scientists understand the magnitude of this devastating hurricane. Peak-discharge information also is critical for the proper design of hydraulic structures (such as bridges and levees), delineation of theoretical flood boundaries, and development of stage-discharge relations at streamflow-monitoring sites.

Water-Resources Investigations Report↗
USGS1986

Progress report on the effects of highway construction on suspended-sediment discharge in the Coal River and Trace Fork, West Virginia, 1975-81

Construction of the four-lane Appalachian Corridon G highway disturbed about 2 sq mi in the Coal River and 0.35 sq mi of the 4.75 sq mi Trace Fork basin in southern West Virginia. Construction had a negligible effect on runoff and suspended-sediment load in the Coal River and its major tributaries, the Little Coal and Big Coal Rivers. Drainage areas of the mainstem sites in the Coal River basin ranged from 269 to 862 sq mi, and average annual suspended-sediment yields ranged from 535 to 614 tons/sq mi for the 1975-81 water years. Suspended-sediment load in the smaller Trace Fork basin (4.72 sq mi) was significantly affected by the highway construction. Based on data from undisturbed areas upstream from construction, the normal background load at Trace Fork downstream from construction during the period July 1980 to September 1981 was estimated to be 830 tons; the measured load was 2,385 tons. Runoff from the 0.35 sq mi area disturbed by highway construction transported approximately 1,550 tons of sediment. Suspended-sediment loads from the construction zone were also higher than normal background loads during storms. (USGS)

Water-Resources Investigations Report↗
USGS2003

Sedimentation History of Lago Guayabal, Puerto Rico, 1913-2001

The Lago Guayabal dam, located in the municipality of Villalba in southern Puerto Rico, was constructed in 1913 for irrigation of croplands in the southern coastal plains and is owned and operated by the Puerto Rico Electric Power Authority. The reservoir had an original storage capacity of 11.82 million cubic meters and a drainage area upstream of the dam of 112 square kilometers. Sedimentation has reduced the storage capacity to 6.12 million cubic meters in 2001, which represents a storage loss of about 48 percent. However, the actual sediment accumulation in the reservoir during the 88 years is greater, because some sediment removal was conducted between 1940 and 1948 by dredging and sluicing. This report summarizes the historical data from a 1913 land survey and eight bathymetric surveys conducted between 1914 and 2001, and the relation of high sedimentation to agricultural land practices within the Lago Guayabal basin and six major hurricanes which made landfall on the island. The reservoir had an area-normalized sedimentation rate of about 1,863 cubic meters per square kilometer per year between 1913 and 1936 from a 112 square kilometer basin. In 1972, a new dam upstream along the Rio Toa Vaca impounded runoff from 57.5 square kilometers, and sediment transport to Lago Guayabal was reduced. A comparison of bathymetric survey results between 1972 and 2001 indicates an area-normalized sedimentation rate of 1,120 cubic meters per square kilometer per year or about 60 percent of the rate between 1913 and 1936. The significant reduction (almost half) of the sedimentation rate after the Toa Vaca dam was built may indicate that erosion susceptibility of the Rio Toa Vaca watershed is about twice that of the Rio Jacaguas watershed impounded by Lago Guayabal.

Water-Resources Investigations Report↗
USGS2004

Estimating the magnitude of bankfull flows for streams in Idaho

Methods for estimating magnitudes of peak flows with recurrence intervals of 1.5 and 2.33 years were developed for ungaged sites on streams throughout Idaho. These peak flows represent the magnitudes at and near bankfull stage and are needed for quantification of water rights required to maintain or restore fish and wildlife habitats and riparian vegetation. Data from a previous report detailing methods for estimating magnitudes with recurrence intervals of 2 to 500 years were used in this study. Generalized least-squares regression techniques were used to calculate the final coefficients and measures of accuracy for the regression equations for each of nine regions. The equations relate basin and climatic characteristics to peak flows with recurrence intervals of 1.5 and 2.33 years. The basin and climatic characteristics used to develop the equations included drainage area, mean basin elevation, forested area, mean annual precipitation, basin slope, north-facing slopes greater than 30 percent, and slopes greater than 30 percent. Average standard errors of the regression model ranged from +150 to -60.1 percent, and average standard errors of prediction ranged from +165 to -62.2 percent. The range of prediction errors was narrowest, -48.9 to -32.9 percent, for region 5. A computer program was developed to automate the calculations required for the regional regression calculations. Results from this program comprised calculated peak flows, site-specific standard errors of prediction, and the 90-percent confidence intervals for the estimates.

Idaho;Montana;Nevada;Oregon;Washington;Wyoming↗
USGS1999

Summary of hydrogeologic and ground-water-quality data and hydrogeologic framework at selected well sites, Adams County, Pennsylvania

Rapid population growth in Adams County has increased the demand for ground water and led Adams County planning officials to undertake an effort to evaluate the capabilities of existing community water systems to meet future, projected growth and to begin wellhead-protection programs for public-supply wells. As part of this effort, this report summarizes ground-water data on a countywide scale and provides hydrogeologic information needed to delineate wellheadprotection areas in three hydrogeologic units (Gettysburg Lowland, Blue Ridge, and Piedmont Lowland). Reported yields, specific capacities, well depths, and reported overburden thickness can vary by hydrogeologic unit, geologic formation, water use (domestic and nondomestic), and topographic setting. The reported yields of domestic wells drilled in the Gettysburg Lowland (median reported yield of 10 gallons per minute) are significantly greater than the reported yields from the Blue Ridge, Piedmont Lowland, and Piedmont Upland (median reported yields of 7.0, 8.0, and 7.0 gallons per minute, respectively). Reported yields of domestic wells completed in the diabase and the New Oxford Formation of the Gettysburg Lowland, and in the metarhyolite and metabasalt of the Blue Ridge, are significantly lower than reported yields of wells completed in the Gettysburg Formation. For nondomestic wells, reported yields from the Conestoga Formation of the Piedmont Lowland are significantly greater than in the diabase. Reported yields of nondomestic wells drilled in the Gettysburg, New Oxford, and Conestoga Formations, and the metarhyolite are significantly greater than those for domestic wells drilled in the respective geologic formations. Specific capacities of nondomestic wells in the Conestoga and Gettysburg Formations are significantly greater than their domestic counterparts. Specific capacities of nondomestic wells in the Conestoga Formation are significantly greater than the specific capacities of nondomestic wells in the metarhyolite, diabase, and Gettysburg and New Oxford Formations.Well depths do not vary considerably by hydrogeologic unit; instead, the greatest variability is by water use. Nondomestic wells drilled in the metarhyolite, Kinzers, Conestoga, Gettysburg, and New Oxford Formations are completed at significantly greater depths than their domestic counterparts. The reported thickness of overburden varies significantly by geologic formation and water use, but not by topographic setting. The median overburden thickness of the Blue Ridge (35 feet) is greater than in any other hydrologic unit. Except where adversely affected by human activities, ground water in Adams County is suitable for most purposes. Calcium and magnesium are the dominant cations, and bicarbonate is the dominant anion. In general, the pH and hardness of ground water is lower in areas that are underlain by crystalline rocks (Blue Ridge and Piedmont Upland) than in areas underlain by sedimentary rocks, especially where limestone or dolomite is dominant (Piedmont Lowland). Dissolved nitrate (as N) and dissolved nitrite (as N) concentrations in the water from 9 of 69 wells and 3 of 80 wells sampled exceeded the U.S. Environmental Protection Agency (USEPA) maximum contaminant levels (MCL) of 10 and 1.0 mg/L (milligrams per liter), respectively. Sulfate concentrations greater than the proposed USEPA MCL of 500 mg/L were reported from the water in 3 of 110 wells sampled. Iron concentrations in the water from 13 of 67 wells sampled and manganese in the water from 9 of 64 wells sampled exceeded the USEPA secondary maximum contaminant level (SMCL) of 300 and 50 mg/L (micrograms per liter), respectively. Aluminum concentrations in the water from 16 of 22 wells sampled exceeded the lower USEPA SMCL threshold of 50 µg/L. Pesticides were detected in the water from seven wells but at concentrations that did not exceed USEPA MCL's. Most volatile organic compounds detected in the ground water were confined to USEPA Superfund sites or the immediate area around the sites. The hydrogeologic framework in the vicinity of four public-supply well fields (Gettysburg, Abbottstown, Fairfield, and Littlestown) consists of two zones—an upper zone and a lower zone. In general, the upper zone is thin (5 to 60 feet or more) and dominated by saturated regolith and deeply weathered bedrock. The upper zone is bounded at the top by the water table and below by bedrock in which secondary porosity and permeability are considerably lower. Ground water is generally unconfined, and recharge rates are rapid. Ground-water flow is influenced more strongly by the topography of the ground surface and bedrock surface than by geologic structure. The lower zone is relatively thick (400 to 1,000 feet) and consists of slightly weathered to highly competent bedrock. Ground-water flow paths in the lower zone are generally greater and recharge rates are longer than in the upper zone; confined conditions are common, especially at depth.

Water-Resources Investigations Report↗
USGS1989

Geohydrology and susceptibility of major aquifers to surface contamination in Alabama; area 3

This report delineates and describes the geohydrology and the susceptibility to contamination of the major aquifers in Area 3--Cullman, Fayette, Lamar, Marion, Walker, and Winston Counties , Alabama. The major aquifers in the study area are the Tuscaloosa, Pottsville, and Bangor aquifers. The Pottsville aquifer is the most extensively used in the study area. The aquifer consists of sandstones and conglomerates with fractures and bedding plane openings. The Tuscaloosa aquifer, primarily used in the west and southwest part of the study area, is composed of sands and gravels in the Tuscaloosa Group. The Bangor aquifer, the least used aquifer in the study area, consists of limestone with bedding planes, solution cavaties, and fractures. All three aquifers are recharged throughout their outcrop areas and are susceptible to contamination from the surface within these areas. The Tuscaloosa aquifer is the most susceptible aquifer to contamination within the study area because of the absence of confining layers, shallow depth to the water surface, and relatively uniform porosity and permeability of aquifer materials. The Pottsville and Bangor aquifers are less susceptible to surface contamination than the Tuscaloosa aquifer; generally having lower permeability and receiving less recharge than the Tuscaloosa aquifer thereby making surface contamination less likely. (USGS)

Water-Resources Investigations Report↗
USGS1978

Interim report on streamflow, sediment discharge, and water quality in the Calabazas Creek Basin, Santa Clara County, California

Streamflow, sediment-discharge, and water-quality data are being collected in the Calabazas Creek basin, Santa Clara County, Calif., to determine annual water and sediment discharge at base-line conditions that are representative of a basin prior to urbanization. Results of the first 3 years of the study (1973-75) are given in this report. Climatic conditions during this period were representative of a very wet year (1973) and 2 years of above-average rainfall (1974 and 1975). Daily water and sediment discharge were monitored at three primary stations, and periodic measurements were made at five secondary stations during selected storms. Most of the total annual sediment discharge at each station was transported during a few days each year. Maximum daily sediment discharge in a given year ranged from 23 to 62 percent of the annual total. Daily water discharge at the gaging station Calabazas Creek at Rainbow Drive, near Cupertino, ranged from no flow to 3.31 cubic meters per second. Streamflow at this location was significantly augmented during low flow by diversion of water from the South Bay Aqueduct. Annual sediment discharge at Calabazas Creek at Rainbow Drive was 4,900 t in 1974 and 9,570 t in 1975. A large quantity of sediment was trapped in a debris basin at Comer Drive upstream from this station during both years. If this sediment had not been trapped, sediment discharge at the station would have been about 35 percent greater in 1974 and 30 percent greater in 1975. Most of the trapped sediment consists of sand and gravel that would probably have been deposited in the Calabazas Creek channel downstream from the station. (Woodard-USGS)

California↗
USGS1993

Simulated flow and solute transport, and mitigation of a hypothetical soluble-contaminant spill for the New River in the New River Gorge National River, West Virginia

This report presents the results of a study by the U.S. Geological Survey (USGS), in cooperation with the National Park Service, to investigate the transport and factors affecting mitigation of a hypothetical spill of a soluble contaminant into the New River in the New River Gorge National River, West Virginia. The study reach, 53 miles of the lower New River between Hinton and Fayette, is characterized as a pool-and-riffle stream that becomes narrower, steeper, and deeper in the downstream direction. A USGS unsteady-flow model, DAFLOW (Diffusion Analogy FLOW), and a USGS solute-transport model, BLTM (Branch Lagrangian Transport Model), were applied to the study reach. Increases in discharge caused decreases in peak concentration and traveltime of peak concentration. Decreases in discharge caused increases in peak concentration and traveltime of peak concentration. This study indicated that the effects of an accidental spill could be mitigated by regulating discharge from Bluestone Dam. Knowledge of the chemical characteristics of the spill, location and time of the spill, and discharge of the river can aid in determining a mitigation response.

Water-Resources Investigations Report↗
USGS1984

Cost-effectiveness of the stream-gaging program in Nebraska

This report documents the results of a study of the cost-effectiveness of the streamflow information program in Nebraska. Presently, 145 continuous surface-water stations are operated in Nebraska on a budget of $908,500. Data uses and funding sources are identified for each of the 145 stations. Data from most stations have multiple uses. All stations have sufficient justification for continuation, but two stations primarily are used in short-term research studies; their continued operation needs to be evaluated when the research studies end. The present measurement frequency produces an average standard error for instantaneous discharges of about 12 percent, including periods when stage data are missing. Altering the travel routes and the measurement frequency will allow a reduction in standard error of about 1 percent with the present budget. Standard error could be reduced to about 8 percent if lost record could be eliminated. A minimum budget of $822,000 is required to operate the present network, but operations at that funding level would result in an increase in standard error to about 16 percent. The maximum budget analyzed was $1,363,000, which would result in an average standard error of 6 percent. (USGS)

Water-Resources Investigations Report↗
USGS1987

Cost-effectiveness of the stream-gaging program in Missouri

This report documents the results of an evaluation of the cost effectiveness of the 1986 stream-gaging program in Missouri. Alternative methods of developing streamflow information and cost-effective resource allocation were used to evaluate the Missouri program. Alternative methods were considered statewide, but the cost effective resource allocation study was restricted to the area covered by the Rolla field headquarters. The average standard error of estimate for records of instantaneous discharge was 17 percent; assuming the 1986 budget and operating schedule, it was shown that this overall degree of accuracy could be improved to 16 percent by altering the 1986 schedule of station visitations. A minimum budget of $203,870, with a corresponding average standard error of estimate 17 percent, is required to operate the 1986 program for the Rolla field headquarters; a budget of less than this would not permit proper service and maintenance of the stations or adequate definition of stage-discharge relations. The maximum budget analyzed was $418,870, which resulted in an average standard error of estimate of 14 percent. Improved instrumentation can have a positive effect on streamflow uncertainties by decreasing lost records. An earlier study of data uses found that data uses were sufficient to justify continued operation of all stations. One of the stations investigated, Current River at Doniphan (07068000) was suitable for the application of alternative methods for simulating discharge records. However, the station was continued because of data use requirements. (Author 's abstract)

Water-Resources Investigations Report↗
USGS1990

Source, extent, and degradation of herbicides in a shallow aquifer near Hesston, Kansas

Atrazine, alachlor, cyanazine, metolachlor, and metribuzin were detected in water from a domestic well completed in a shallow aquifer underlying the Harvey County Experiment Field near Hesston, Kansas. The study described in this report investigated the source, extent, and degradation of these five herbicides. Hydrogeologic analysis of the site enabled estimation of the degradation half-lives of the herbicides in the saturated zone. The most probable source of the contamination was back- siphonage or spillage of herbicides from a sprayer tank into a trench backfilled with sand. The herbicides moved downgradient to the domestic well and then moved into the aquifer via the annular space in the well. Once in the aquifer, the contaminants remained nearly stationary with very little lateral movement away from the point of injection. Decreases in herbicide concentrations were caused mainly by degradation of the parent compounds and to a lesser degree, by extensive pumping of the well. Estimated herbicide degradation half-lives in the saturated environment were 1,000 days for atrazine, 400 days for alachlor, 250 days for cyanazine, 350 days for metolachlor, and 350 days for metribuzin. The herbicides will likely be eliminated from the soil and groundwater at the experiment field by continued natural degradation at the land surface and by degradation in and continued pumping of water from the aquifer. Pumping will remove any degradation products as well as the remaining parent compounds. (USGS)

Kansas↗
USGS1994

Yields of bedrock wells in Massachusetts

Six to seven percent of the population of Massachusetts obtains its water from domestic bedrock wells. Additional public, commercial, industrial, and domestic supplies from bedrock will be needed in the future. Information about the factors that are related to large well yields is needed. The factors associated with well yields were identified by use of statistical analysis of reported data from 4,218 bedrock wells. The median reported yield of all bedrock wells was 7 gallons per minute, and the median depth was 170 feet. Wells in valleys and lowlands had the largest median yield--I0 gallons per minute. The median well yield on hilltops and slopes was 6 gallons per minute. In valleys and lowlands, significant increases in well yields corresponded to increasing thickness of overburden. On hilltops and slopes, only small increases in well yield corresponded to increases in overburden thickness. Increases in well diameter corresponded to significant increases in well yields for all well locations, depths, and use categories. The common assumptions that fractured crystalline rocks generally yield only small quantities of water to wells and that the fractures that yield water to wells pinch out or are closed because of lithostatic pressure at depths greater than 300 to 400 feet may be in error. Analysis of well data indicates that the median yield of all bedrock wells decreased as well depth increased to 400 feet and increased slightly with well depths greater than 600 feet. The median yield of bedrock wells located in valleys and lowlands reached 50 gallons per minute at depths of 600 to 700 feet. The median yield of wells located on hilltops and slopes reached 15 gallons per minute at depths of 600 to 700 feet. Carbonate bedrock, with a median well yield of 25 gallons per minute, seemed to be the most productive bedrock type. A reported yield of 1,700 gallons per minute from an industrial well completed in carbonate bedrock is the largest reported yield from a bedrock well in Massachusetts. Yield of wells in sedimentary rocks of the Connecticut Valley increased significantly at depths greater than 400 feet, indicating that this bedrock type may have some primary permeability. Commercial or industrial wells had a median yield of 30 gallons per minute. These wells appear to be preferentially sited, large in diameter, and deeper than average to maximize potential well yields. The median reported bedrock well yield and depth have changed over time. The median yield of about 20 gallons per minute for 1920-40 decreased to 6 gallons per minute for 1970-80. Well depth increased from 128 feet for 1950- 60 to 250 feet for 1980-90. The period during which well depths began to increase coincides with a change in bedrock-well drilling methods from cable tool to air rotary with percussion. Four methods of testing the yield of domestic bedrock wells were evaluated: air injection, evacuation and recovery, constant-discharge, and instantaneous discharge or recharge. A constant-discharge test best satisfied the criteria established to evaluate the testing methods. Further data collection and evaluation are needed for the systematic characterization and appraisal of the bedrock aquifers of Massachusetts. Specific elements include (1) improved and expanded collection and storage of well data, (2) detailed hydrogeologic evaluations of apparent high yield bedrock areas, (3) an evaluation of the relation between the vertical distribution of hydraulic properties measured during well drilling to actual hydraulic properties, (4) an evaluation of the effect of well diameter on well yield, and (5) areal evaluations to characterize the quality of water in bedrock.

Water-Resources Investigations Report↗
USGS1993

Flood of April 1989 in the Wahpeton-Breckenridge and Fargo-Moorhead areas, Red River of the North Basin, North Dakota and Minnesota

The most severe flooding during the April 1989 flood in the Red River of the North Basin in North Dakota and Minnesota occurred in the Wahpeton-Breckenridge area. Flood stage on April 5, 1989, was the highest stage that has been reported in almost 100 years. The 1989 peak flow was not as large as that of the 1969 flood, which had the largest peak flow since the Wahpeton gage was installed in 1942. The 1989 peak stage, however, was more than 1 foot higher than during the 1969 flood because of backwater from ice. Cooler weather subsequent to the peak at Wahpeton slowed the snowmelt and allowed the peak to attenuate as it moved downstream; thus, the severity of flooding in the Fargo-Moorhead area and in areas farther downstream was reduced. Advance flood warning allowed communities downstream from the Wahpeton-Breckenridge area to prepare for the flood and was instrumental in reducing flood damage. Aerial photographs were used to delineate the extent of the April 1989 flood in the Wahpeton-Breckenridge and the Fargo-Moorhead areas on topographic maps. The aerial photographs of the Wahpeton-Breckenridge area were taken during the flood peak on April 5 and those of the Fargo-Moorhead area were taken during the flood peak on April 9.

Minnesota, North Dakota↗
USGS1996

Glaciers along proposed routes extending the Copper River Highway, Alaska

Three inland highway routes are being considered by the Alaska Department of Transportation and Public Facilities to connect the community of Cordova in southcentral Alaska to a statewide road system. The routes use part of a Copper River and Northwest Railway alignment along the Copper River through mountainous terrain having numerous glaciers. An advance of any of several glaciers could block and destroy the roadway, whereas retreating glaciers expose large quantities of unconsolidated, unvegetated, and commonly ice-rich sediments. The purpose of this study was to map historical locations of glacier termini near these routes and to describe hazards associated with glaciers and seasonal snow. Historical and recent locations of glacier termini along the proposed Copper River Highway routes were determined by reviewing reports and maps and by interpreting aerial photographs. The termini of Childs, Grinnell, Tasnuna, and Woodworth Glaciers were 1 mile or less from a proposed route in the most recently available aerial photography (1978-91); the termini of Allen, Heney, and Schwan Glaciers were 1.5 miles or less from a proposed route. In general, since 1911, most glaciers have slowly retreated, but many glaciers have had occasional advances. Deserted Glacier and one of its tributary glaciers have surge-type medial moraines, indicating potential rapid advances. The terminus of Deserted Glacier was about 2.1 miles from a proposed route in 1978, but showed no evidence of surging. Snow and rock avalanches and snowdrifts are common along the proposed routes and will periodically obstruct the roadway. Floods from ice-dammed lakes also pose a threat. For example, Van Cleve Lake, adjacent to Miles Glacier, is as large as 4.4 square miles and empties about every 6 years. Floods from drainages of Van Cleve Lake have caused the Copper River to rise on the order of 20 feet at Million Dollar Bridge.

Water-Resources Investigations Report↗
USGS1995

Irrigation water use for the Fort Lyon Canal, southeastern Colorado, 1989-90

The U.S. Geological Survey, in cooperation with the Bent County Board of County Commissioners, began a study to evaluate irrigation water use quanti- tatively for about 91,630 acres of farmland irrigated from the 103.7-mile-long Fort Lyon Main Canal in the Arkansas River Valley of southeastern Colorado. This report provides information from 1980 and 1990 for four hydrologic components of irrigation water use: Surface-water withdrawals, conveyance losses, ground-water withdrawals, and estimates of threretical crop consumptive use. Surface-water withdrawals for the Fort Lyon Canal were 211,150 acre-feet (about 2.3 acre-feet per acre) during 1989 and 202,000 acre-feet (about 2.2 acre-feet per acre) during 1990. Conveyance losses occurred during the transport of water in the unlined Fort Lyon Canal. Conveyance losses were as much as 72 (acre-feet per day) per mile in the first division of the canal and generally decreased in the downstream canal divisions. Ground-water withdrawals for the Fort Lyon Canal were estimated to be 38,890 acre-feet (about 0.8 acre-foot per acre irrigated ground water) during 1989 and 33,970 acre-feet (about 0.7 acre-foot per acre irrigated by ground water) during 1990. Theoretical crop consumptive use was estimated to be 227,530 acre-feet (about 2.7 acre-feet per acre of cropland) during 1989 and 251, 130 acre-feet (about 2.9 acre-feet per acre of cropland) during 1990. The total crop irrigation requirement needed from irrigation withdrawals was 172,100 acre-feet (about 2.0 acre-feet per acre of cropland) during ` 1989 and 190,050 acre-feet (about 2.2 acre-feet per acre of cropland) during 1990. Crops cultivted in the five divisions of the canal were alfalfa, sorghum, corn, wheat, pasture, and spring grains.

Water-Resources Investigations Report↗
USGS1975

Stream reconnaissance for nutrients and other water-quality parameters, Greater Pittsburgh Region, Pennsylvania

Eighty-five stream sites in and near the six-county Greater Pittsburgh Region were sampled in mid-June 1971 in mid-October 1972. Data are reported for 89 sites because 4 substitute sites were sampled in the second period. Drainage areas of the basins sampled ranged from 4.1 to 19,5000 square miles (10.6 to 50,500 square kilometres). The chemical analyses included constituents of three general classes: (1) nutrients, (2) activity indicators, and (3) dominant anions. Modification of the natural chemical and physical characteristics of the surface waters by man's activities is evident in some of the data. However, the activities are so diverse in type and in areal extent that their influence in terms of cause and effect is often obscure. Nutrient concentrations were high enough to indicate potential problems at about a quarter of the sampling sites. Temperature, dissolved oxygen, and pH values indicated a generally favorable capacity for regeneration or recovery from degradation, although a number a streams east of the Allegheny and Monongahela Rivers are marginal or lacking in the capacity. Regionally, sulfate is the dominant ion and was observed in concentrations of 40 milligrams per litre or more at 90 percent of the sites. Bicarbonate exceeded 100 milligrams per litre at 22 sites. A moderate to high degree of mineralization, as indicated by conductance readings of more than 500 micromhos per cetrimetre at half of the sampling sites, is a characteristic of the region's surface waters.

Pennsylvania↗