Search USGS⌕ Search

SEARCH · Search USGS

Results for “Environmental Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78Linked to original sources
USGS2022

A framework to integrate innovations in invasion science for proactive management

Invasive alien species (IAS) are a rising threat to biodiversity, national security, and regional economies, with impacts in the hundreds of billions of U.S. dollars annually. Proactive or predictive approaches guided by scientific knowledge are essential to keeping pace with growing impacts of invasions under climate change. Although the rapid development of diverse technologies and approaches has produced tools with the potential to greatly accelerate invasion research and management, innovation has far outpaced implementation and coordination. Technological and methodological syntheses are urgently needed to close the growing implementation gap and facilitate interdisciplinary collaboration and synergy among evolving disciplines. A broad review is necessary to demonstrate the utility and relevance of work in diverse fields to generate actionable science for the ongoing invasion crisis. Here, we review such advances in relevant fields including remote sensing, epidemiology, big data analytics, environmental DNA (eDNA) sampling, genomics, and others, and present a generalized framework for distilling existing and emerging data into products for proactive IAS research and management. This integrated workflow provides a pathway for scientists and practitioners in diverse disciplines to contribute to applied invasion biology in a coordinated, synergistic, and scalable manner.

Biological Reviews↗
USGS1980

Isolation of uranium mill tailings and their component radionuclides from the biosphere; some earth science perspectives

Uranium mining and milling is an expanding activity in the. Western United States. Although the milling process yields a uranium concentrate, the large volume of tailings remaining contains about 85 percent of the radioactivity originally associated with the ore. By virtue of the physical and chemical processing of the ore and the redistribution of the contained radionuclides at the Earth's surface, these tailings constitute a technologically enhanced source of natural radiation exposure. Sources of potential human radiation exposure from uranium mill tailings include the emanation of radon gas, the transport of particles by wind and water, and the transport of soluble radionuclides, seeping from disposal areas, by ground water. Due to the 77,000 year half-life of thorium-230, the parent of radium-226, the environmental effects associated with radionuclides contained in these railings must be conceived of within the framework of geologic processes operating over geologic time. The magnitude of erosion of cover materials and tailings and the extent of geochemical mobilization of the contained radionuclides to the atmosphere and hydrosphere should be considered in the evaluation of the potential, long-term consequences of all proposed uranium mill tailings management plans.

Circular↗
USGS2004

Cyanide hazards to plants and animals from gold mining and related water issues

Highly toxic sodium cyanide (NaCN) is used by the international mining community to extract gold and other precious metals through milling of high-grade ores and heap leaching of low-grade ores (Korte et al. 2000). The process to concentrate gold using cyanide was developed in Scotland in 1887 and was used almost immediately in the Witwatersrand gold fields of the Republic of South Africa. Heap leaching with cyanide was proposed by the U.S. Bureau of Mines in 1969 as a means of extracting gold from low-grade ores. The gold industry adopted the technique in the 1970s, soon making heap leaching the dominant technology in gold extraction (Da Rosa and Lyon 1997). The heap leach and milling processes, which involve dewatering of gold-bearing ores, spraying of dilute cyanide solutions on extremely large heaps of ores containing low concentrations of gold, or the milling of ores with the use of cyanide and subsequent recovery of the gold-cyanide complex, have created a number of serious environmental problems affecting wildlife and water management. In this account, we review the history of cyanide use in gold mining with emphasis on heap leach gold mining, cyanide hazards to plants and animals, water management issues associated with gold mining, and proposed mitigation and research needs.

Archives of Environmental Contamination and Toxico↗
USGS2010

Development of inferential sensors for real-time quality control of water-level data for the Everglades Depth Estimation Network

The Everglades Depth Estimation Network (EDEN) is an integrated network of real-time water-level gaging stations, ground-elevation models, and watersurface models designed to provide scientists, engineers, and water-resource managers with current (2000-present) water-depth information for the entire freshwater portion of the greater Everglades. The generation of EDEN waterlevel surfaces is derived from real-time data. Real-time data are automatically checked for outliers using minimum, maximum, and rate-of-change thresholds for each station. Smaller errors in the real-time data, such as gradual drift of malfunctioning pressure transducers, are more difficult to immediately identify with visual inspection of time-series plots and may only be identified during on-site inspections of the gages. Correcting smaller errors in the data often is time consuming and water-level data may not be finalized for several months. To provide water-level surfaces on a daily basis, EDEN needed an automated process to identify errors in water-level data and to provide estimates for missing or erroneous waterlevel data. A technology often used for industrial applications is “inferential sensor.” Rather than installing a redundant sensor to measure a process, such as an additional waterlevel gage, an inferential sensor, or virtual sensor, is developed that estimates the processes measured by the physical sensor. The advantage of an inferential sensor is that it provides a redundant signal to the sensor in the field but without exposure to environmental threats. In the event that a gage does malfunction, the inferential sensor provides an estimate for the period of missing data. The inferential sensor also can be used in the quality assurance and quality control of the data. Inferential sensors for gages in the EDEN network are currently (2010) under development. The inferential sensors will be automated so that the real-time EDEN data will continuously be compared to the inferential sensor signal and digital reports of the status of the real-time data will be sent periodically to the appropriate support personnel. The development and application of inferential sensors is easily transferable to other real-time hydrologic monitoring networks.

Florida↗
USGS2002

HAZPAC: An interactive map of Pacific Rim natural hazards, population, and infrastructure

This is an online version of a CD-ROM publication. The text files that describe using this publication make reference to software provided on the disc. For this online version the software can be downloaded for free from Adobe Systems and Environmental Systems Research Institute, Inc. (ESRI). Welcome to HAZPAC! HAZPAC is an interactive map about natural hazard risk in the Pacific Rim region. It is intended to communicate to a broad audience the ideas of 'Crowding the Rim,' which is an international, public-private partnership that fosters collaborative solutions for regional risks. HAZPAC, which stands for 'HAZards of the PACific,' uses Geographic Information System (GIS) technology to help people visualize the socioeconomic connections and shared hazard vulnerabilities among Pacific Rim countries, as well as to explore the general nature of risk. Please refer to the 'INTRODUCTION TO HAZPAC' section of the readme file below to determine which HAZPAC project will be right for you. Once you have decided which HAZPAC project is suitable for you, please refer to the 'GETTING STARTED' sections in the readme file for some basic information that will help you begin using HAZPAC. Also, we highly recommend that you follow the Tutorial exercises in the project-specific HAZPAC User Guides. The User Guides are PDF (Portable Document Format) files that must be read with Adobe Acrobat Reader (a free copy of Acrobat Reader is available using the link near the bottom of this page).

Data Series↗
USGS2022

Hydrological and lock operation conditions associated with paddlefish and bigheaded carp dam passage on a large and small scale in the Upper Mississippi River (Pools 14–18)

Movement and dispersal of migratory fish species is an important life-history characteristics that can be impeded by navigation dams. Although habitat fragmentation may be detrimental to native fish species, it might act as an effective and economical barrier for controlling the spread of invasive species in riverine systems. Various technologies have been proposed as potential fish deterrents at locks and dams to reduce bigheaded carp (i.e., silver carp and bighead carp ( Hypophthalmichthys spp.)) range expansion in the Upper Mississippi River (UMR). Lock and Dam (LD) 15 is infrequently at open-river condition (spillway gates completely open; hydraulic head across the dam <0.4 m) and has been identified as a potential location for fish deterrent implementation. We used acoustic telemetry to evaluate paddlefish passage at UMR dams and to evaluate seasonal and diel movement of paddlefish and bigheaded carp relative to environmental conditions and lock operations at LD 15. We observed successful paddlefish passage at all dams, with the highest number of passages occurring at LDs 17 and 16. Paddlefish residency events in the downstream lock approach of LD 15 occurred more frequently and for longer durations than residency events of bigheaded carp. We documented upstream passages completed by two individual paddlefish through the lock chamber at LD 15, and a single bighead carp completed upstream passage through the lock chamber during two separate years of this study. We identified four bigheaded carp and 19 paddlefish that made upstream passages through the spillway gates at LD 15 during this study. The majority of the upstream passages through the spillway gates for both species occurred during open river conditions. When hydraulic head was approximately 1-m or greater, we observed these taxa opt for upstream passage through the lock chamber more often than the dam gates. In years with infrequent open-river condition, a deterrent placed in the downstream lock approach may assist in meeting the management goal of reducing upstream passage of bigheaded carps but could also potentially affect paddlefish residency and passage. Continued study to understand the effects of deterrents on native fish could be beneficial for implementing an integrated bigheaded carp control strategy. Understanding fish behavior at UMR dams is a critical information need for river managers as they evaluate potential tools or technologies to control upstream expansion of bigheaded carp in the UMR.

Illinois, Iowa↗
USGS2013

Monitoring to assess progress toward meeting the total maximum daily load for phosphorus in the Assabet River, Massachusetts: phosphorus loads, 2008 through 2010

Wastewater discharges to the Assabet River contribute substantial amounts of phosphorus, which support accumulations of nuisance aquatic plants that are most evident in the river’s impounded reaches during the growing season. To restore the Assabet River’s water quality and aesthetics, the U.S. Environmental Protection Agency required the major wastewater-treatment plants in the drainage basin to reduce the amount of phosphorus discharged to the river by 2012. From October 2008 to December 2010, the U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection and in support of the requirements of the Total Maximum Daily Load for Phosphorus, collected weekly flow-proportional, composite samples for analysis of concentrations of total phosphorus and orthophosphorus upstream and downstream from each of the Assabet River’s two largest impoundments: Hudson and Ben Smith. The purpose of this monitoring effort was to evaluate conditions in the river before enhanced treatment-plant technologies had effected reductions in phosphorus loads, thereby defining baseline conditions for comparison with conditions following the mandated load reductions. The locations of sampling sites with respect to the impoundments enabled examination of the impoundments’ effects on phosphorus sequestration and on the transformation of phosphorus between particulate and dissolved forms. The study evaluated the differences between loads upstream and downstream from the impoundments throughout the sampling period and compared differences during two seasonal periods of relevance to aquatic plants: April 1 through October 31, the growing season, and November 1 through March 31, the nongrowing season, when existing permit limits allowed average monthly wastewater-treatment-plant-effluent concentrations of 0.75 milligram per liter (growing season) or 1.0 milligram per liter (nongrowing season) for total phosphorus. At the four sampling sites during the growing season, median weekly total phosphorus loads ranged from 110 to 190 kilograms (kg) and median weekly orthophosphorus loads ranged from 17 to 41 kg. During the nongrowing season, median weekly total phosphorus loads ranged from 240 to 280 kg and median weekly orthophosphorus loads ranged from 56 to 66 kg. During periods of low and moderate streamflow, estimated loads of total phosphorus upstream from the Hudson impoundment generally exceeded those downstream during the same sampling periods throughout the study; orthophosphorus loads downstream from the impoundment were typically larger than those upstream. When storm runoff substantially increased the streamflow, loads of total phosphorus and orthophosphorus both tended to be larger downstream than upstream. At the Ben Smith impoundment, both total phosphorus and orthophosphorus loads were generally larger downstream than upstream during low and moderate streamflow, but the differences were not as pronounced as they were at the Hudson impoundment. High flows were also associated with substantially larger total phosphorus and orthophosphorus loads downstream than those entering the impoundment from upstream. In comparing periods of growing- and nongrowing-season loads, the same patterns of loads entering and leaving were observed at both impoundments. That is, at the Hudson impoundment, total phosphorus loads entering the impoundment were greater than those leaving it, and orthophosphorus loads leaving the impoundment were greater than those entering it. At the Ben Smith impoundment, both total phosphorus and orthophosphorus loads leaving the impoundment were greater than those entering it. However, the loads were greater during the nongrowing seasons than during the growing seasons, and the net differences between upstream and downstream loads were about the same. The results indicate that some of the particulate fraction of the total phosphorus loads is sequestered in the Hudson impoundment, where particulate phosphorus probably undergoes some physical and biogeochemical transformations to the dissolved form orthophosphorus. The orthophosphorus may be taken up by aquatic plants or transported out of the impoundments. The results for the Ben Smith impoundment are less clear and suggest net export of total phosphorus and orthophosphorus. Differences between results from the two impoundments may be attributable in part to differences in their sizes, morphology, unmonitored tributaries, riparian land use, and processes within the impoundments that have not been quantified for this study.

Massachusetts↗
USGS2003

Seabird tissue archival and monitoring project: Egg collections and analytical results 1999-2002

In 1998, the U.S. Geological Survey Biological Resources Division (USGS-BRD), the U.S. Fish and Wildlife Service (USFWS) Alaska Maritime National Wildlife Refuge (AMNWR), and the National Institute of Standards and Technology (NIST) began the Seabird Tissue Archival and Monitoring Project (STAMP) to collect and cryogenically bank tissues from seabirds in Alaska for future retrospective analysis of anthropogenic contaminants. The approach of STAMP was similar to that of the Alaska Marine Mammal Tissue Archival Project (AMMTAP). AMMTAP was started in 1987 by NIST and the National Oceanic and Atmospheric Administration (NOAA) as part of the Outer Continental Shelf Environmental Assessment Program sponsored by the Minerals Management Service. Presently sponsored by the USGS-BRD, AMMTAP continues its work as part of a larger national program, the Marine Mammal Health and Stranding Response Program. AMMTAP developed carefully designed sampling and specimen banking protocols. Since 1987, AMMTAP has collected tissues from marine mammals taken in Alaska Native subsistence hunts and has cryogenically banked these tissues at the NIST National Biomonitoring Specimen Bank (NBSB). Through its own analytical work and working in partnership with other researchers both within and outside Alaska, AMMTAP has helped to develop a substantial database on contaminants in Alaska marine mammals. In contrast, data and information is limited on contaminants in Alaska seabirds, which are similar to marine mammals in that they feed near the top of the food chain and have the potential for accumulating anthropogenic contaminants. During its early planning stages, STAMP managers identified the seabird egg as the first tissue of choice for study by the project. There is a relatively long history of using bird eggs for environmental monitoring and for investigating the health status of bird populations. Since 1998, protocols for collecting and processing eggs, and cryogenically banking egg samples have been developed by STAMP (see York et al. 2001). Eggs are being collected on an annual basis for several species at nesting colonies throughout Alaska. Aliquots of these egg samples are being analyzed on a regular basis for persistent organic pollutants and mercury. Results of this work have been published in scientific journals (Christopher et al. 2002) and in conference proceedings (Kucklick et al. 2002; Vander Pol et al. 2002a, 2002b). The intent of this report is to provide an up-to-date description of STAMP. The report contains the most recent egg collection inventory, analytical data, preliminary interpretations based on these data, and a discussion of possible future directions of the project.

Report↗
USGS2024

Critical considerations for communicating environmental DNA science

The economic and methodological efficiencies of environmental DNA (eDNA) based survey approaches provide an unprecedented opportunity to assess and monitor aquatic environments. However, instances of inadequate communication from the scientific community about confidence levels, knowledge gaps, reliability, and appropriate parameters of eDNA-based methods have hindered their uptake in environmental monitoring programs and, in some cases, has created misperceptions or doubts in the management community. To help remedy this situation, scientists convened a session at the Second National Marine eDNA Workshop to discuss strategies for improving communications with managers. These include articulating the readiness of different eDNA applications, highlighting the strengths and limitations of eDNA tools for various applications or use cases, communicating uncertainties associated with specified uses transparently, and avoiding the exaggeration of exploratory and preliminary findings. Several key messages regarding implementation, limitations, and relationship to existing methods were prioritized. To be inclusive of the diverse managers, practitioners, and researchers, we and the other workshop participants propose the development of communication workflow plans, using RACI (Responsible, Accountable, Consulted, Informed) charts to clarify the roles of all pertinent individuals and parties and to minimize the chance for miscommunications. We also propose developing decision support tools such as Structured Decision-Making (SDM) to help balance the benefits of eDNA sampling with the inherent uncertainty, and developing an eDNA readiness scale to articulate the technological readiness of eDNA approaches for specific applications. These strategies will increase clarity and consistency regarding our understanding of the utility of eDNA-based methods, improve transparency, foster a common vision for confidently applying eDNA approaches, and enhance their benefit to the monitoring and assessment community.

Environmental DNA↗
USGS2022

Next-generation technologies unlock new possibilities to track rangeland productivity and quantify multi-scale conservation outcomes

Historically, relying on plot-level inventories impeded our ability to quantify large-scale change in plant biomass, a key indicator of conservation practice outcomes in rangeland systems. Recent technological advances enable assessment at scales appropriate to inform management by providing spatially comprehensive estimates of productivity that are partitioned by plant functional group across all contiguous US rangelands. We partnered with the Sage Grouse and Lesser Prairie-Chicken Initiatives and the Nebraska Natural Legacy Project to demonstrate the ability of these new datasets to quantify multi-scale changes and heterogeneity in plant biomass following mechanical tree removal, prescribed fire, and prescribed grazing. In Oregon's sagebrush steppe, for example, juniper tree removal resulted in a 21% increase in one pasture's productivity and an 18% decline in another. In Nebraska's Loess Canyons, perennial grass productivity initially declined 80% at sites invaded by trees that were prescriptively burned, but then fully recovered post-fire, representing a 492% increase from nadir. In Kansas' Shortgrass Prairie, plant biomass increased 4-fold (966,809 kg/ha) in pastures that were prescriptively grazed, with gains highly dependent upon precipitation as evidenced by sensitivity of remotely sensed estimates (SD ± 951,308 kg/ha). Our results emphasize that next-generation remote sensing datasets empower land managers to move beyond simplistic control versus treatment study designs to explore nuances in plant biomass in unprecedented ways. The products of new remote sensing technologies also accelerate adaptive management and help communicate wildlife and livestock forage benefits from management to diverse stakeholders.

Kansas, Nebraska, Oregon↗
USGS2005

Screening and evaluation of polymers as flocculation aids for the treatment of aquacultural effluents

As environmental regulations become more stringent, environmentally sound waste management and disposal are becoming increasingly more important in all aquaculture operations. One of the primary water quality parameters of concern is the suspended solids concentration in the discharged effluent. For example, EPA initially considered the establishment of numerical limitations for only one single pollutant: total suspended solids (TSS). For recirculation systems, the proposed TSS limitations would have applied to solids polishing or secondary solids removal technology. The new rules and regulations from EPA (August 23, 2004) require only qualitative TSS limits, in the form of solids control best management practices (BMP), allowing individual regional and site specific conditions to be addressed by existing state or regional programs through NPDES permits. In recirculation systems, microscreen filters are commonly used to remove the suspended solids from the process water. Further concentration of suspended solids from the backwash water of the microscreen filter could significantly reduce quantity of discharge water. And in some cases, the backwash water from microscreen filters needs to be further concentrated to minimize storage volume during over wintering for land disposal or other final disposal options. In addition, this may be required to meet local, state, and regional discharge water quality. The objective of this research was an initial screening of several commercially available polymers routinely used as coagulation-flocculation aids in the drinking and wastewater treatment industry and determination of their effectiveness for the treatment of aquaculture wastewater. Based on the results of the initial screening, a further evaluation of six polymers was conducted to estimate the optimum polymer dosage for flocculation of aquaculture microscreen effluent and overall solids removal efficiency. Results of these evaluations show TSS removal was close to 99% via settling, with final TSS values ranging from as low as 10-17 mg/L. Although not intended to be used for reactive phosphorus (RP) removal, RP was reduced by 92-95% by removing most of the TSS in the wastewater to approximately 1 mg/L-P. Dosage requirements were fairly uniform, requiring between 15 and 20 mg/L of polymer. Using these dosages, estimated costs range from $4.38 to $13.08 per metric tonne of feed. ?? 2005 Elsevier B.V. All rights reserved.

Aquacultural Engineering↗
USGS2007

A watershed approach to ecosystem monitoring in Denali National Park and preserve, Alaska

The National Park Service and the National Biological Service initiated research in Denali National Park and Preserve, a 2.4 million-hectare park in southcentral Alaska, to develop ecological monitoring protocols for national parks in the Arctic/Subarctic biogeographic area. We are focusing pilot studies on design questions, on scaling issues and regionalization, ecosystem structure and function, indicator selection and evaluation, and monitoring technologies. Rock Creek, a headwater stream near Denali headquarters, is the ecological scale for initial testing of a watershed ecosystem approach. Our conceptual model embraces principles of the hydrological cycle, hypotheses of global climate change, and biological interactions of organisms occupying intermediate, but poorly studied, positions in Alaskan food webs. The field approach includes hydrological and depositional considerations and a suite of integrated measures linking key aquatic and terrestrial biota, environmental variables, or defined ecological processes, in order to establish ecological conditions and detect, track, and understand mechanisms of environmental change. Our sampling activities include corresponding measures of physical, chemical, and biological attributes in four Rock Creek habitats believed characteristic of the greater system diversity of Denali. This paper gives examples of data sets, program integration and scaling, and research needs.

Journal of the American Water Resources Associatio↗
USGS2016

Arctic Research Plan: FY2017-2021

The United States is an Arctic nation—Americans depend on the Arctic for biodiversity and climate regulation and for natural resources. America’s Arctic—Alaska—is at the forefront of rapid climate, environmental, and socio-economic changes that are testing the resilience and sustainability of communities and ecosystems. Research to increase fundamental understanding of these changes is needed to inform sound, science-based decision- and policy-making and to develop appropriate solutions for Alaska and the Arctic region as a whole. Created by an Act of Congress in 1984, and since 2010 a subcommittee of the National Science and Technology Council (NSTC) in the Executive Office of the President, the Interagency Arctic Research Policy Committee (IARPC) plays a critical role in advancing scientific knowledge and understanding of the changing Arctic and its impacts far beyond the boundaries of the Arctic. Comprising 14 Federal agencies, offices, and departments, IARPC is responsible for the implementation of a 5-year Arctic Research Plan in consultation with the U.S. Arctic Research Commission, the Governor of the State of Alaska, residents of the Arctic, the private sector, and public interest groups.

Report↗
USGS2017

A comparison of honey bee-collected pollen from working agricultural lands using light microscopy and ITS metabarcoding

Taxonomic identification of pollen has historically been accomplished via light microscopy but requires specialized knowledge and reference collections, particularly when identification to lower taxonomic levels is necessary. Recently, next-generation sequencing technology has been used as a cost-effective alternative for identifying bee-collected pollen; however, this novel approach has not been tested on a spatially or temporally robust number of pollen samples. Here, we compare pollen identification results derived from light microscopy and DNA sequencing techniques with samples collected from honey bee colonies embedded within a gradient of intensive agricultural landscapes in the Northern Great Plains throughout the 2010–2011 growing seasons. We demonstrate that at all taxonomic levels, DNA sequencing was able to discern a greater number of taxa, and was particularly useful for the identification of infrequently detected species. Importantly, substantial phenological overlap did occur for commonly detected taxa using either technique, suggesting that DNA sequencing is an appropriate, and enhancing, substitutive technique for accurately capturing the breadth of bee-collected species of pollen present across agricultural landscapes. We also show that honey bees located in high and low intensity agricultural settings forage on dissimilar plants, though with overlap of the most abundantly collected pollen taxa. We highlight practical applications of utilizing sequencing technology, including addressing ecological issues surrounding land use, climate change, importance of taxa relative to abundance, and evaluating the impact of conservation program habitat enhancement efforts.

Environmental Entomology↗
USGS2022

Science mission requirements for a globally ranging, riserless drilling vessel for U.S. Scientific Ocean Drilling

Through the collection and analysis of shallow and deep subseafloor sediments, rocks, fluids, and life, scientific ocean drilling has enriched our understanding of the complex Earth system. Among other achievements, scientific ocean drilling has documented the history of Earth’s climate, the waxing and waning of polar ice sheets, the past changes in ocean and atmospheric circulation, the existence and function of microbial life in the subseafloor, the compositional variations in Earth’s crust and underlying mantle, and the physical and chemical processes acting at subduction zones, including those associated with tsunamigenic earthquakes. Over the decades, more than 12,000 articles that depend on analyses of scientific ocean drilling samples and geophysical data have been published, many detailing breakthrough contributions to global knowledge about the Earth system. Approximately 45% of these publications were led by U.S.-affiliated authors (International Ocean Discovery Program Publication Services, 2021). Since the mid-1980s, the workhorse of this multidisciplinary, international research effort has been the riserless D/V JOIDES Resolution, operated by Texas A&M University with funding from the U.S. National Science Foundation (NSF). D/V JOIDES Resolution has conducted the vast majority of scientific ocean drilling expeditions and collected most of the scientific cores over that period, including 82% of the expeditions and 93% of the cores in the last decade alone, despite being one of three platforms that is operated within the International Ocean Discovery Program. However, D/V JOIDES Resolution is approaching the end of its useful life. With a strong commitment to continue scientific ocean drilling beyond the end of the current phase, the community developed a document outlining the research frontiers that should be pursued. Exploring Earth by Scientific Ocean Drilling: 2050 Science Framework (Koppers and Coggon, 2020) describes seven scientific strategic objectives that focus on understanding interconnections within the Earth system and five flagship initiatives that integrate these objectives into long-term research efforts that address issues facing society. Additional elements in the 2050 Science Framework, including STEM education, workforce development, technology development, and innovative applications of data analytics, will advance the goals of scientific ocean drilling. Addressing the 2050 Science Framework also requires building partnerships with allied U.S. and international science programs and strengthening existing ones. To implement a significant portion of the 2050 Science Framework, the U.S. scientific community seeks to lease or acquire a newly built, globally ranging, state-of-the art, riserless drilling vessel. The many and varied technical and human resources requirements for successful accomplishment of scientific and educational goals summarized in this document and described in detail in the 2050 Science Framework require broad community input and careful consideration. Following receipt of NSF’s formal Request for Assistance to the United States Science Support Program (USSSP), the U.S. scientific ocean drilling community conducted a one-year exercise to identify its national scientific needs and priorities in order to determine the Science Mission Requirements (SMRs) presented here. This community effort included: (1) a U.S. community-wide survey to identify the specific operational and technical capabilities critical to addressing science in the 2050 Science Framework; (2) a series of online workshops focusing on critical capabilities identified by the survey; and (3) a large in-person workshop to synthesize the results of the survey and the virtual workshops (Appendix 1). The approach was designed to reach as many participants as possible. Overall, 278 survey responses were received from U.S. community members, representing 104 unique institutions from 39 states and the District of Columbia, and 137 unique individuals participated in the workshops (Appendix 2). The results of this effort comprise two classes of SMRs: Foundational Science Mission Requirements and Primary Science Mission Requirements. Foundational SMRs define minimum criteria for a new riserless drilling vessel that can address significant portions of the 2050 Science Framework. Primary SMRs build upon the Foundational SMRs and will create more robust science opportunities and data collection capabilities, will increase progress in addressing the 2050 Science Framework objectives, and will provide more real-time ship-to-shore interaction to improve science productivity, engagement, and outreach. Modern safety and environmental standards, including meeting standards to access protected waters such as exclusive economic zones, extended continental shelves, or high latitudes, while being cognizant of the vessel’s environmental footprint. Safe and efficient operations in global locations and in water depths from 70 m to 6000+ m, with total drill string length of at least 7000 m. High-quality core and data collection from a range of key subseafloor environments. Advanced heave compensation, dynamic positioning, and drill pipe stability. Modern mud and cement/casing systems. Critical onboard measurements for safety, operational decision-making, documentation of ephemeral properties, mission-specific science, and long-term science goals that extend beyond a single expedition. Designated and appropriate space for sample and data preservation. Highly skilled onboard personnel, including technical staff for curation and core handling; support for safety, time-sensitive, and critical shipboard measurements; computer support; equipment and instrument repair; application support; and data assurance. Primary Science Mission Requirements include: Flexible shipboard space for laboratories and on deck to ensure safe, successful implementation of diverse science objectives and operations. Minimizing contamination of recovered samples. Over-the-side capabilities for science-supporting technology (e.g., remotely operated vehicles, water- column sampling, sediment-water interface sampling). Downhole logging and measurements. Expanded borehole observatory capabilities. Reliable and consistent ship-to-shore communications. NSF’s investment in a new globally ranging, riserless drilling vessel will have a powerful economic multiplier effect, including the infusion of additional science support funds in the United States for training and research, the development of new technologies and tools, and the associated scientific and technical workforce development. The skills and knowledge gained through scientific ocean drilling are translatable to careers in fields such as sustainable energy development (e.g., geothermal and offshore wind), carbon sequestration, data management and cyberinfrastructure, biotechnology, communications, science education, policy, hazard mitigation, and environmental management. The United States is a leader in a well-established and internationally collaborative scientific ocean drilling community. A modern, globally ranging, riserless drilling vessel will allow the United States to expand its leadership position, address broad scientific questions that current capabilities preclude, and cultivate equitable international, multidisciplinary collaborations that will ensure scientific ocean drilling’s future success.

Report↗
USGS2024

The EnMAP spaceborne imaging spectroscopy mission: Initial scientific results two years after launch

Imaging spectroscopy has been a recognized and established remote sensing technology since the 1980s, mainly using airborne and field-based platforms to identify and quantify key bio- and geo-chemical surface and atmospheric compounds, based on characteristic spectral reflectance features in the visible-near infrared (VNIR) and short-wave infrared (SWIR). Spaceborne missions, a leap in technology, were sparse, starting with the CHRIS/PROBA and EO1/Hyperion missions in the early 2000s, and providing spectroscopy data with limited spectral coverage and/or low data quality in the SWIR. Since 2019, several countries and agencies have successfully launched a number of spaceborne imaging spectroscopy systems into orbit or deployed them on the International Space Station (ISS) such as DESIS, PRISMA, HISUI, GF-5, EnMAP and EMIT. Among these recent missions, the German Environmental Mapping and Analysis Program (EnMAP) stands for its long-term development, sophisticated design with on-board calibration, high data quality requirements, and extensive accompanying science program. EnMAP was launched in April 2022 and, following a successful commissioning phase, started its operational activities in November 2022. The EnMAP mission encompasses global coverage from 80° N to 80° S through on-demand data acquisitions. Data are free and open access with 30 m spatial resolution, a high spectral resolution with a spectral sampling distance of 6.5 nm and 10 nm in the VNIR and SWIR regions respectively, and a high signal-to-noise ratio. In this paper, we aim to present the mission's current status, coverage, science capabilities and performance two years after launch. We show the potential of EnMAP for space-based imaging spectroscopy to operate in various environments, including high and low light levels, dense forests, Antarctic glaciers, and arid agricultural areas. EnMAP enables various applications in fields such as agriculture and forestry, soil compositional, raw materials, and methane mapping, as well as water quality assessment, and snow and ice properties. The results show that EnMAP's performance exceeds the mission requirements, and highlights the significant potential for contribution to scientific exploitation in various geo- and biochemical sciences. EnMAP is also expected to serve as a key tool for the development and testing of data processing algorithms for upcoming global operational missions.

Remote Sensing of Environment↗
USGS2009

Web-based decision support and visualization tools for water quality management in the Chesapeake Bay watershed

Federal, State, and local water quality managers charged with restoring the Chesapeake Bay ecosystem require tools to maximize the impact of their limited resources. To address this need, the U.S. Geological Survey (USGS) and the Environmental Protection Agency's Chesapeake Bay Program (CBP) are developing a suite of Web-based tools called the Chesapeake Online Assessment Support Toolkit (COAST). The goal of COAST is to help CBP partners identify geographic areas where restoration activities would have the greatest effect, select the appropriate management strategies, and improve coordination and prioritization among partners. As part of the COAST suite of tools focused on environmental restoration, a water quality management visualization component called the Nutrient Yields Mapper (NYM) tool is being developed by USGS. The NYM tool is a web application that uses watershed yield estimates from USGS SPAtially Referenced Regressions On Watershed (SPARROW) attributes model (Schwarz et al., 2006) [6] to allow water quality managers to identify important sources of nitrogen and phosphorous within the Chesapeake Bay watershed. The NYM tool utilizes new open source technologies that have become popular in geospatial web development, including components such as OpenLayers and GeoServer. This paper presents examples of water quality data analysis based on nutrient type, source, yield, and area of interest using the NYM tool for the Chesapeake Bay watershed. In addition, we describe examples of map-based techniques for identifying high and low nutrient yield areas; web map engines; and data visualization and data management techniques.

Conference Paper↗
USGS2013

Potential reductions of street solids and phosphorus in urban watersheds from street cleaning, Cambridge, Massachusetts, 2009-11

Material accumulating and washing off urban street surfaces and ultimately into stormwater drainage systems represents a substantial nonpoint source of solids, phosphorus, and other constituent loading to waterways in urban areas. Cost and lack of usable space limit the type and number of structural stormwater source controls available to municipalities and other public managers. Non-structural source controls such as street cleaning are commonly used by cities and towns for construction, maintenance and aesthetics, and may reduce contaminant loading to waterways. Effectiveness of street cleaning is highly variable and potential improvements to water quality are not fully understood. In 2009, the U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection, the U.S. Environmental Protection Agency, and the city of Cambridge, Massachusetts, and initiated a study to better understand the physical and chemical nature of the organic and inorganic solid material on street surfaces, evaluate the performance of a street cleaner at removing street solids, and make use of the Source Loading and Management Model (SLAMM) to estimate potential reductions in solid and phosphorus loading to the lower Charles River from various street-cleaning technologies and frequencies. Average yield of material on streets collected between May and December 2010, was determined to be about 740 pounds per curb-mile on streets in multifamily land use and about 522 pounds per curb-mile on commercial land-use streets. At the end-of-winter in March 2011, about 2,609 and 4,788 pounds per curb-mile on average were collected from streets in multifamily and commercial land-use types, respectively. About 86 percent of the total street-solid yield from multifamily and commercial land-use streets was greater than or equal to 0.125 millimeters in diameter (or very fine sand). Observations of street-solid distribution across the entire street width indicated that as much as 96 percent of total solids resided within 9 feet of the curb. Median accumulation rates of street solids and median washoff of street solids after rainstorms on multifamily and commercial land-use streets were also similar at about 33 and 22 pounds per curb-mile per day, and 35 and 40 percent, respectively. Results indicate that solids on the streets tested in Cambridge, Mass., can recover to pre-rainstorm yields within 1 to 3 days after washoff. The finer grain-size fractions tended to be more readily washed from the roadway surfaces during rainstorms. Street solids in the coarsest grain-size fraction on multifamily streets indicated an average net increase following rainstorms and are likely attributed to debris run-on from trees, lawns, and other plantings commonly found in residential areas. In seven experiments between May and December 2010, the median removal efficiency of solids from street surfaces following a single pass by a regenerative-air street cleaner was about 82 percent on study sites in the multifamily land-use streets and about 78 percent on the commercial land-use streets. Median street-solid removal efficiency increased with increasing grain size. This type of regenerative-air street cleaner left a median residual street-solid load on the street surface of about 100 pounds per curb-mile. Median concentrations of organic carbon and total phosphorus (P) on multifamily streets were about 35 and 29 percent greater, respectively, than those found on commercial streets. The median total mass of organic carbon and total P in street solids on multifamily streets was 68 and 75 percent greater, respectively, than those found on commercial streets. More than 87 percent of the mass of total P was determined to be in solids greater than or equal to 0.125 millimeters in diameter for both land-use types. The median total accumulation rate for total P on multifamily streets was about 5 times greater than on commercial streets. Total P accumulation in the medium grain-size fraction was nearly the same for streets within both land-use types at 0.004 pounds per curb-mile per day. Accumulation rates within the coarsest and finest grain-size fractions on multifamily streets were about 11 and 82 times greater than those on the commercial streets. Median washoff of total P was 58 and 48 percent from streets in multifamily and commercial land-use types, respectively, and generally increased with decreasing grain size. Total P median reductions resulting from a single pass of a regenerative-air street cleaner on streets in multifamily and commercial land-use types were about 82 and 62 percent, respectively, and were similar in terms of grain size between both land-use types. A Source Loading and Management Model for Microsoft Windows (WinSLAMM) was applied to a 21.8 acre subcatchment in Cambridge, Mass. The subcatchment area consists of mostly commercial and multifamily land-use types to evaluate the potential reductions of total and particulate solids, and P attributed to street cleaning. Rainwater runoff from rooftops represented between 20 and 50 percent of the total basin runoff. Street surfaces only accounted for about 20 percent of the total basin runoff. Monthly applications of mechanical-brush and vacuum-assisted street cleaners within the subcatchment as defined by SLAMM for areas with long-term (24-hour) on-street parking and monthly parking controls using five average climatic years resulted in total solid reductions of about 3 and 5 percent, respectively. Simulating the regenerative-air street cleaner tested as part of this study resulted in total solid reductions of about 16 percent. Increasing street cleaning frequency to three times weekly increased total solids removal for mechanical-brush, vacuum-assisted, and regenerative-air street cleaners to about 6, 14, and 19 percent, respectively. Monthly applications of mechanical-brush, vacuum-assisted, and regenerative-air street cleaners within the subcatchment resulted in total P reductions of about 1, 3, and 8 percent, respectively. A street cleaning frequency of three times each week for each of the three street-cleaner types increased total P removal to about 3, 7, and 9 percent, respectively.

Massachusetts↗