SEARCH · Search USGS

Results for “Scientific Data”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77Linked to original sources

USGS2010

Earthquake casualty models within the USGS Prompt Assessment of Global Earthquakes for Response (PAGER) system

Since the launch of the USGS’s Prompt Assessment of Global Earthquakes for Response (PAGER) system in fall of 2007, the time needed for the U.S. Geological Survey (USGS) to determine and comprehend the scope of any major earthquake disaster anywhere in the world has been dramatically reduced to less than 30 min. PAGER alerts consist of estimated shaking hazard from the ShakeMap system, estimates of population exposure at various shaking intensities, and a list of the most severely shaken cities in the epicentral area. These estimates help government, scientific, and relief agencies to guide their responses in the immediate aftermath of a significant earthquake. To account for wide variability and uncertainty associated with inventory, structural vulnerability and casualty data, PAGER employs three different global earthquake fatality/loss computation models. This article describes the development of the models and demonstrates the loss estimation capability for earthquakes that have occurred since 2007. The empirical model relies on country-specific earthquake loss data from past earthquakes and makes use of calibrated casualty rates for future prediction. The semi-empirical and analytical models are engineering-based and rely on complex datasets including building inventories, time-dependent population distributions within different occupancies, the vulnerability of regional building stocks, and casualty rates given structural collapse.

Book chapter↗

USGS2023

Initial comparison of pollen counting methods using precipitation and ambient air samples and automated artificial intelligence to support national monitoring objectives

Given the endemic nature of pollen throughout the environment, the impact upon human health, and the need for more extensive and better measurements of pollen in the USA, a preliminary project within the National Atmospheric Deposition Program’s (NADP) National Trends Network (NTN) was developed. Pollen was measured in ambient air by several methods and in precipitation wet deposition samples at three monitoring sites in the NTN. A method for counting pollen on filters was developed and provided pollen counts for NADP atmospheric wet-deposition samples and high-volume ambient air samplers (HVAS) for comparison with co-located traditional National Allergy Bureau microscopy samples and a commercially available pollen sensor (PS) counting method during the 2021 pollen season. The goals of this project were to test the potential of available air-monitoring infrastructures to obtain improved spatial measurements of aeroallergens, compare pollen counting results from the various methods, and to determine the suitability of using wet deposition samples for pollen collection. The onset and senescence of pollen seasons for general categories of genera compared favorably for each method at each site, indicating that pollen monitoring using wet-deposition and ambient air sampling filters could provide useful information to inform scientific studies, but not likely for public health objectives. Pollen counts were log transformed for Pearson product moment correlation. Tree pollen counts were correlated at all sites for daily PS data and traditional counting data ( R = 0.69–0.84), but statistical correlations between methods for grass and weed pollen were weak (0.40 < R < 0.60) or considered not correlated ( R < 0.40). Total pollen counts in NADP precipitation samples were correlated with traditional and PS counts at only one of three sites. Pollen counts for the weekly HVAS filter samples were correlated with PS counts for trees ( R = 0.62) and with NAB counts for trees ( R = 0.68) and weeds ( R = 0.72). Correlations in the data between methods suggest that, given further methods development, a variety of techniques could be integrated to expand and enhance existing pollen monitoring networks. Improved ambient air and atmospheric deposition sampling methods specifically targeted for pollen capture and analysis could support the collection of accurate and efficient meaningful aeroallergen data from existing atmospheric monitoring networks.

Aerobiologia↗

USGS2024

Current advances in coastal wetland elevation dynamics: Introduction to the special issue

The thematic issue entitled, “Current Advances in Coastal Wetland Elevation Dynamics,” draws on topics from two special sessions at the CERF 2021 conference plus additional recent research describing scientific insights gained from the Surface Elevation Table–Marker Horizon (SET–MH) method and its application across the globe to quantify and understand subsurface process influences on wetland elevation change and wetland responses to sea-level rise. The findings group articles within each of five thematic topics. (1) A 30-year retrospective on the scientific insights gained on surface and shallow subsurface process dynamics. (2) Investigations of the subsurface soil process influences on wetland elevation. (3) How the scientific community applies the SET–MH method to quantify and understand wetland responses to RSLR and other environmental drivers such as altered hydrology and sediment supply. (4) How SET–MH data are used in long-term monitoring networks at different geographic scales. (5) Pairing the SET-MH method with (a) survey techniques to increase lateral coverage of wetland elevation trends and (b) geodetic measurements to increase vertical coverage of vertical land motion.

Estuaries and Coasts↗

USGS2017

Citizen science can improve conservation science, natural resource management, and environmental protection

Citizen science has advanced science for hundreds of years, contributed to many peer-reviewed articles, and informed land management decisions and policies across the United States. Over the last 10 years, citizen science has grown immensely in the United States and many other countries. Here, we show how citizen science is a powerful tool for tackling many of the challenges faced in the field of conservation biology. We describe the two interwoven paths by which citizen science can improve conservation efforts, natural resource management, and environmental protection. The first path includes building scientific knowledge, while the other path involves informing policy and encouraging public action. We explore how citizen science is currently used and describe the investments needed to create a citizen science program. We find that: Citizen science already contributes substantially to many domains of science, including conservation, natural resource, and environmental science. Citizen science informs natural resource management, environmental protection, and policymaking and fosters public input and engagement. Many types of projects can benefit from citizen science, but one must be careful to match the needs for science and public involvement with the right type of citizen science project and the right method of public participation. Citizen science is a rigorous process of scientific discovery, indistinguishable from conventional science apart from the participation of volunteers. When properly designed, carried out, and evaluated, citizen science can provide sound science, efficiently generate high-quality data, and help solve problems.

Biological Conservation↗

USGS2015

Crowdsourced earthquake early warning

Earthquake early warning (EEW) can reduce harm to people and infrastructure from earthquakes and tsunamis, but it has not been implemented in most high earthquake-risk regions because of prohibitive cost. Common consumer devices such as smartphones contain low-cost versions of the sensors used in EEW. Although less accurate than scientific-grade instruments, these sensors are globally ubiquitous. Through controlled tests of consumer devices, simulation of an M w (moment magnitude) 7 earthquake on California’s Hayward fault, and real data from the M w 9 Tohoku-oki earthquake, we demonstrate that EEW could be achieved via crowdsourcing.

Science Advances↗

USGS2024

The 17 January 1994 Northridge, California, earthquake: A retrospective analysis

The 17 January 1994 Northridge, California, earthquake was a watershed event, with far-reaching societal and scientific impacts. The earthquake, which occurred in the early days of both broadband seismic networks and the Internet, spurred advances in seismic monitoring, real-time systems, and development of data products. Motivated by the 30th anniversary of the earthquake, we present a brief retrospective of the earthquake and its impact, and reconsider both ground motions and the aftershock distribution using modern tools and best-available data. With improvements in instrumentation and analysis methodology, recent earthquakes continue to reveal increasing complexity of ground motions, fault systems, and earthquake ruptures. Even in the absence of data from state-of-the art instrumentation, a retrospective consideration of ground motion data from the Northridge earthquake reveals complexities beyond what could be characterized (and modeled) thirty years ago. Aftershock relocations for both the 1971 Sylmar and 1994 Northridge earthquakes also reveal an updated view of fault complexity. Our study does provide a cautionary tale regarding legacy data sets and research results that are not easily accessible, which can result in discrepancies between catalog data and products from best-available science. We also briefly describe outreach products produced as part of the anniversary commemoration.

California↗

USGS2011

Mapping perennial vegetation cover in the Mojave Desert

Scientists with the U.S. Geological Survey's Western Geographic Science Center have recently created a regional map of perennial vegetation cover for the Mojave Desert. The scientists used existing field data collected for a variety of previous studies and satellite data available for free through USGS archives to create a calibrated model of percent vegetation cover, an important attribute of desert ecosystems. This map is being used to inform ongoing scientific investigations and land-management efforts, including endangered species habitat mapping and vulnerability and recoverability studies of desert landscapes in the arid Southwest.

California;Nevada;Utah;Arizona↗

USGS2017

A record of change - Science and elder observations on the Navajo Nation

A Record of Change - Science and Elder Observations on the Navajo Nation is a 25-minute documentary about combining observations from Navajo elders with conventional science to determine how tribal lands and culture are affected by climate change. On the Navajo Nation, there is a shortage of historical climate data, making it difficult to assess changing environmental conditions. This video reveals how a team of scientists, anthropologists, and translators combined the rich local knowledge of Navajo elders with recent scientific investigation to effectively document environmental change. Increasing aridity and declining snowfall in this poorly monitored region of the Southwest are accompanied by declining river flow and migrating sand dunes. The observations of Navajo elders verify and supplement this record of change by informing how shifting weather patterns are reflected in Navajo cultural practices and living conditions.

Navajo Nation↗

USGS1985

Water-resources activities of the U.S. Geological Survey in Kansas; fiscal years 1983 and 1984

The principal mission of the U.S. Geological Survey, Water Resources Division, in Kansas is to investigate the occurrence, quantity, quality, distribution, and movement of surface and ground waters throughout the State. Primary activities include the systematic collection, analysis, and interpretation of hydrologic data, evaluation of water demands, and water-resources research. Hydrologic investigations are conducted through four basic types of projects: (1) data-collection programs, (2) local or areal investigations, (3) statewide or regional investigations, and (4) research projects. These projects are funded through cooperative agreements with State and local agencies, transfer of funds from other Federal agencies, and direct Federal funds. Fifty water-related projects were ongoing during fiscal years 1983 and 1984 in Kansas. This report describes for each of these water-resources activities the problem that initiated the study, the objectives of the project, and the approach designed to achieve these objectives. Information on data-collection stations in Kansas is presented in maps and tables. A list of the 40 reports approved for publication by the U.S. Geological Survey, its cooperators, or technical and scientific organizations during 1983 and 1984 is provided. (USGS)

Open-File Report↗

USGS1987

Water-resources activities of the U.S. Geological Survey in Kansas; fiscal years 1985 and 1986

The principal mission of the U.S. Geological Survey, Water Resources Division, in Kansas is to investigate the occurrence, quantity, quality, distribution, and movement of surface and groundwater throughout the State. Primary activities include the systematic collection, analysis and interpretation of hydrologic data, evaluation of water demands, and water resources research. Hydrologic investigations are conducted through: (1) data collection programs, (2) statewide or regional investigations, (3) local or areal investigations, and (4) research. These projects are funded through cooperative agreements with state and local agencies, transfer of funds from other federal agencies, and direct federal funds. Forty-three water related projects were ongoing during fiscal years 1985 and 1986 in Kansas. This report describes for each project the problem that initiated the study, the objectives of the project, the approach designed to achieve the objectives, and significant milestones or publications that resulted during fiscal years 1985 and 1986. Information on more than 2,150 data collection stations in Kansas is presented in maps and tables. A list of 47 project reports published or released by the U.S. Geological Survey, its cooperators, or technical and scientific organizations during 1985 and 1986 is provided. (Author 's abstract)

Open-File Report↗

USGS2006

Visualizing the geology of lake trout spawning sites: Northern Lake Michigan

Geologists and biologists are working together to understand the links between lake floor geology (composition and shape) and the distribution of lake trout throughout their life cycle. Lake floor geology is one of the main factors determining where lake trout spawn, feed, and hide. In support of ongoing research to study Lake Michigan trout habitats, the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers mapped the morphology of principle lake trout spawning sites. Using the Army Corps of Engineer's SHOALS airborne lidar (Light Detection and Ranging) system we mapped six regions in Northern Lake Michigan in order to identify ideal spawning regions composed of shallow, clean, gravel/cobble substrate, adjacent to deeper water. Lidar mapping systems, which use laser pulses to measure water depths from an airplane, are now available to map the nearshore lake morphology at meter-scale detail. Maps generated from the bathymetric data are used to define regions with smooth homogeneous substrate, regions with higher relief, and mixed regions with both smooth and rough relief. This morphologic information combined with sediment samples and direct bottom observations enable geologists to map areas with rougher relief composed of rock outcrop, boulders, and cobbles, as well as smooth regions covered with sand or mud. This information helps biologists, fishery managers, and ecologists visualize the lake floor in significant detail which promotes better fishery management, species protection, and habitat identification. These maps present the maps and discuss the geology of the six lake trout spawning sites mapped by the lidar system. Where the mapping approached land, aerial photography of the land is combined with the bathymetric data to help visualize the scale of the offshore features. Map and perspective views of Boulder Reef, Hog Island Reef, and Little Traverse Bay are shown on sheet 1, whereas map and perspective views of Trout and High Island Shoal, Gull Island Reef, and Dahlia Shoal are shown on sheet 2. Additional information, bathymetric data, imagery, and metadata are available online at http://geopubs.wr.usgs.gov/open-file/of03-120/.

Michigan, Wisconsin↗

USGS2008

Sedimentation Survey of Lago La Plata, Puerto Rico, July 2006

Lago La Plata dam is located between the municipalities of Naranjito and Toa Alta in north central Puerto Rico, about 5 kilometers south of the town of Toa Alta and about 5 kilometers north of the town of Naranjito. The reservoir impounds the waters of the Rio de La Plata, the Rio Guadiana, and the Rio Ca?as, and is part of the San Juan Metropolitan Water District, which provides about 35 percent of the total water demand for the area (Soler-Lopez and others, 2000). The reservoir has a drainage area of about 469 square kilometers. The dam was constructed in 1974 and is a concrete gravity structure with a normal pool elevation of 52.00 meters above mean sea level (Puerto Rico Electric Power Authority, 1979). During October 1998, the U.S. Geological Survey (USGS), Caribbean Water Science Center, in cooperation with the Puerto Rico Aqueduct and Sewer Authority (PRASA) conducted a bathymetric survey of Lago La Plata to assess the impact of Hurricane Georges on the storage capacity of the reservoir. Between July 17 and 20, 2006, the USGS and the PRASA conducted an additional bathymetric survey of Lago La Plata to update the reservoir storage capacity and determine the reservoir sedimentation rate by comparing the 2006 survey data with the 1998 survey data.. The purpose of this report is to update the reservoir storage capacity, sedimentation rates, and areas of substantial sediment accumulation since 1998. Historical (1974) data are referenced as needed to account for long-term storage capacity loss trends...

Puerto Rico↗

USGS2012

Earthquakes and faults in southern California (1970-2010)

The map depicts both active and inactive faults and earthquakes magnitude 1.5 to 7.3 in southern California (1970–2010). The bathymetry was generated from digital files from the California Department of Fish And Game, Marine Region, Coastal Bathymetry Project. Elevation data are from the U.S. Geological Survey National Elevation Database. Landsat satellite image is from fourteen Landsat 5 Thematic Mapper scenes collected between 2009 and 2010. Fault data are reproduced with permission from 2006 California Geological Survey and U.S. Geological Survey data. The earthquake data are from the U.S. Geological Survey National Earthquake Information Center.

California↗

USGS2013

Bathymetric map, area/capacity table, and sediment volume estimate for Millwood Lake near Ashdown, Arkansas, 2013

Millwood Lake, in southwestern Arkansas, was constructed and is operated by the U.S. Army Corps of Engineers (USACE) for flood-risk reduction, water supply, and recreation. The lake was completed in 1966 and it is likely that with time sedimentation has resulted in the reduction of storage capacity of the lake. The loss of storage capacity can cause less water to be available for water supply, and lessens the ability of the lake to mitigate flooding. Excessive sediment accumulation also can cause a reduction in aquatic habitat in some areas of the lake. Although many lakes operated by the USACE have periodic bathymetric and sediment surveys, none have been completed for Millwood Lake. In March 2013, the U.S. Geological Survey (USGS), in cooperation with the USACE, surveyed the bathymetry of Millwood Lake to prepare an updated bathymetric map and area/capacity table. The USGS also collected sediment thickness data in June 2013 to estimate the volume of sediment accumulated in the lake.

Arkansas↗

USGS2014

Geologic and geophysical maps of the eastern three-fourths of the Cambria 30' x 60' quadrangle, central California Coast Ranges

The Cambria 30´ x 60´ quadrangle comprises southwestern Monterey County and northwestern San Luis Obispo County. The land area includes rugged mountains of the Santa Lucia Range extending from the northwest to the southeast part of the map; the southern part of the Big Sur coast in the northwest; broad marine terraces along the southwest coast; and broadvalleys, rolling hills, and modest mountains in the northeast. This report contains geologic, gravity anomaly, and aeromagnetic anomaly maps of the eastern three-fourths of the 1:100,000-scale Cambria quadrangle and the associated geologic and geophysical databases (ArcMap databases), as well as complete descriptions of the geologic map units and the structural relations in the mapped area. A cross section is based on both the geologic map and potential-field geophysical data. The maps are presented as an interactive, multilayer PDF, rather than more traditional pre-formatted map-sheet PDFs. Various geologic, geophysical, paleontological, and base map elements are placed on separate layers, which allows the user to combine elements interactively to create map views beyond the traditional map sheets. Four traditional map sheets (geologic map, gravity map, aeromagnetic map, paleontological locality map) are easily compiled by choosing the associated data layers or by choosing the desired map under Bookmarks.

California↗

USGS2004

A decision support system for map projections of small scale data

The use of commercial geographic information system software to process large raster datasets of terrain elevation, population, land cover, vegetation, soils, temperature, and rainfall requires both projection from spherical coordinates to plane coordinate systems and transformation from one plane system to another. Decision support systems deliver information resulting in knowledge that assists in policies, priorities, or processes. This paper presents an approach to handling the problems of raster dataset projection and transformation through the development of a Web-enabled decision support system to aid users of transformation processes with the selection of appropriate map projections based on data type, areal extent, location, and preservation properties.

Scientific Investigations Report↗

USGS2008

Net Acid Production, Acid Neutralizing Capacity, and Associated Mineralogical and Geochemical Characteristics of Animas River Watershed Igneous Rocks Near Silverton, Colorado

This report presents results from laboratory and field studies involving the net acid production (NAP), acid neutralizing capacity (ANC), and magnetic mineralogy of 27 samples collected in altered volcanic terrain in the upper Animas River watershed near Silverton, Colo., during the summer of 2005. Sampling focused mainly on the volumetrically important, Tertiary-age volcanic and plutonic rocks that host base- and precious-metal mineralization in the study area. These rocks were analyzed to determine their potential for neutralization of acid-rock drainage. Rocks in the study area have been subjected to a regional propylitic alteration event, which introduced calcite, chlorite (clinochlore), and epidote that have varying amounts and rates of acid neutralizing capacity (ANC). Locally, hydrothermal alteration has consumed any ANC and introduced minerals, mainly pyrite, that have a high net acid production (NAP). Laboratory studies included hydrogen pyroxide (H2O2) acid digestion and subsequent sodium hydroxide (NaOH) titration to determine NAP, and sulfuric acid (H2SO4) acid titration experiments to determine ANC. In addition to these environmental rock-property determinations, mineralogical, chemical, and petrographic characteristics of each sample were determined through semiquantitative X-ray diffractometry (Rietveld method), optical mineralogy, wavelength dispersive X-ray fluorescence, total carbon-carbonate, and inductively coupled plasma?mass spectrometric analysis. An ANC ranking was assigned to rock samples based on calculated ANC quantity in kilograms/ton (kg/t) calcium carbonate equivalent and ratios of ANC to NAP. Results show that talus near the southeast Silverton caldera margin, composed of andesite clasts of the Burns Member of the Silverton Volcanics, has the highest ANC (>100 kg/t calcium carbonate equivalent) with little to no NAP. The other units found to have moderate to high ANC include (a) andesite lavas and volcaniclastic rocks of the San Juan Formation, west and northwest of the Silverton caldera, and (b) the Picayune Megabreccia Member of Sapinero Mesa Tuff along the western San Juan caldera margin. Sultan Mountain stock, composed of granitoid intrusive rocks, was shown to have low ANC and moderate NAP. Sequential leachate analyses on a suite of whole-rock samples from the current and a previous study indicate that host rock composition and mineralogy control leachate compositions. The most mafic volcanic samples had high leachate concentrations for Mg, Fe, and Ca, whereas silicic volcanic samples had lower ferromagnesiun compositions. Samples with high chlorite abundance also had high leachable Mg concentrations. Trace-element substitution, such as Sr for Ca in plagioclase, controls high Sr concentrations in those samples with high plagioclase abundance. High Ti abundance in leachate was observed in those samples with high magnetite concentrations. This is likely due to samples containing intergrown magnetite-ilmenite. Whole rocks having high trace-element concentrations have relatively high leachate trace-element abundances. Some lavas of the San Juan Formation and Burns Member of the Silverton Volcanics had elevated Zn-, Cd-, and Pb-leachate concentrations. Manganese was also elevated in one San Juan Formation sample. Other San Juan Formation and Burns Member lavas had low to moderate trace-element abundances. One sample of the pyroxene andesite member of the Silverton Volcanics had elevated concentrations for As and Mo. Most other pyroxene andesite member samples had low leachate trace-element abundances. Mine-waste-leachate analyses indicated that one mine-waste sample had elevated concentrations of Cu (1.5 orders of magnitude), Zn (1 order of magnitude), As (1 order of magnitude), Mo (1.5 to 2 orders of magnitude), Cd (1 to 2 orders of magnitude), and Pb (2 to 3 orders of magnitude) compared to whole rocks. These data indicate the importance of whole-rock geochemistry or leachate analys

Scientific Investigations Report↗

USGS2011

Estimates of tracer-based piston-flow ages of groundwater from selected sites: National Water-Quality Assessment Program, 1992–2005

This report documents selected age data interpreted from measured concentrations of environmental tracers in groundwater from 1,399 National Water-Quality Assessment (NAWQA) Program groundwater sites across the United States. The tracers of interest were chlorofluorocarbons (CFCs), sulfur hexafluoride (SF 6 ), and tritium/helium-3 ( 3 H/ 3 He). Tracer data compiled for this analysis primarily were from wells representing two types of NAWQA groundwater studies—Land-Use Studies (shallow wells, usually monitoring wells, in recharge areas under dominant land-use settings) and Major-Aquifer Studies (wells, usually domestic supply wells, in principal aquifers and representing the shallow, used resource). Reference wells (wells representing groundwater minimally impacted by anthropogenic activities) associated with Land-Use Studies also were included. Tracer samples were collected between 1992 and 2005, although two networks sampled from 2006 to 2007 were included because of network-specific needs. Tracer data from other NAWQA Program components (Flow System Studies, which are assessments of processes and trends along groundwater flow paths, and various topical studies) were not compiled herein. Tracer data from NAWQA Land-Use Studies and Major-Aquifer Studies that previously had been interpreted and published are compiled herein (as piston-flow ages), but have not been reinterpreted. Tracer data that previously had not been interpreted and published are evaluated using documented methods and compiled with aqueous concentrations, equivalent atmospheric concentrations (for CFCs and SF 6 ), estimates of tracer-based piston-flow ages, and selected ancillary data, such as redox indicators, well construction, and major dissolved gases (N 2 , O 2 , Ar, CH 4 , and CO 2 ). Tracer-based piston-flow ages documented in this report are simplistic representations of the tracer data. Tracer-based piston-flow ages are a convenient means of conceptualizing groundwater age. However, the piston-flow model is based on the potentially limiting assumptions that tracer transport is advective and that no mixing occurs. Additional uncertainties can arise from tracer degradation, sorption, contamination, or fractionation; terrigenic (natural) sources of tracers; spatially variable atmospheric tracer concentrations; and incomplete understanding of mechanisms of recharge or of the conditions under which atmospheric tracers were partitioned to recharge. The effects of some of these uncertainties are considered herein. For example, degradation, contamination, or fractionation often can be identified or inferred. However, detailed analysis of the effects of such uncertainties on the tracer-based piston-flow ages is constrained by sparse data and an absence of complementary lines of evidence, such as detailed solute transport simulations. Thus, the tracer-based piston-flow ages compiled in this report represent only an initial interpretation of the tracer data.

Scientific Investigations Report↗