Search USGS⌕ Search

SEARCH · Search USGS

Results for “Geological & Geophysical Surveys”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77Linked to original sources
USGS2004

A preliminary assessment of geologic framework and sediment thickness studies relevant to prospective US submission on extended continental shelf

Under the provisions of Articles 76 and 77 of the United Nations Convention on the Law of the Sea (UNCLOS), coastal States have sovereign rights over the continental shelf territory beyond 200-nautical mile (nm) from the baseline from which the territorial sea is measured if certain conditions are met regarding the geologic and physiographic character of the legal continental shelf as defined in those articles. These claims to an extended continental shelf must be supported by relevant bathymetric, geophysical and geological data according to guidelines established by the Commission on the Limits of the Continental Shelf (CLCS, 1999). In anticipation of the United States becoming party to UNCLOS, Congress in 2001 directed the Joint Hydrographic Center/Center for Coastal and Ocean Mapping at the University of New Hampshire to conduct a study to evaluate data relevant to establishing the outer limit of the juridical continental shelf beyond 200 nm and to recommend what additional data might be needed to substantiate such an outer limit (Mayer and others, 2002). The resulting report produced an impressive and sophisticated GIS database of data sources. Because of the short time allowed to complete the report, all seismic reflection data were classified together; the authors therefore recommended that USGS perform additional analysis on seismic and related data holdings. The results of this additional analysis are the substance of this report, including the status of geologic framework, sediment isopach research, and resource potential in the eight regions1 identified by Mayer and others (2002) where analysis of seismic data might be crucial for establishing an outer limit . Seismic reflection and refraction data are essential in determining sediment thickness, one of the criteria used in establishing the outer limits of the juridical continental shelf. Accordingly, the initial task has been to inventory public-domain seismic data sources, primarily those regionally extensive data held within the Department of the Interior (DOI). The numerous seismic reflection and refraction surveys collected prior to 1970 by academic and governmental institutions are generally not included in this compilation, except where they provide unique data in a region. These data sources were omitted from this report because they were deemed to be of insufficient quality (poorly navigated or low resolution) to meet the CLCS standards for a submission, or they were redundant with higher-quality, more modern data. Hence, this report attempts to identify those data sets of highest utility for establishing the outer limits of the juridical continental shelf. If there was any ambiguity or uncertainty about the relevance of a data set to a continental shelf submission, either by its quality, location, or other parameter, it was included in this compilation. This report does not summarize other geophysical data (such as marine magnetics or gravity) that might be relevant to understanding crustal provenance and geological continuity. Detailed metadata tables and maps are included to facilitate the location and utilization of these sources when a comprehensive assessment (?desktop study?) is undertaken.

Open-File Report↗
USGS2025

Near-real-time geochemical monitoring of Hawaiian volcanoes using energy dispersive X-ray fluorescence (EDXRF)

Syn-eruption geochemical monitoring during volcanic activity is an important component of integrated volcanic monitoring. Volcanoes on the Island of Hawai‘i are primarily monitored by the U.S. Geological Survey’s Hawaiian Volcano Observatory using instrumental networks, field surveys, satellite observations, and petrologic monitoring. In collaboration with the University of Hawaiʻi at Hilo, an important component of this monitoring is near-real-time (generally within 24 h of sample collection) bulk-rock geochemistry using benchtop energy-dispersive X-ray fluorescence (EDXRF). Bulk-rock geochemistry, coupled with additional petrologic and geophysical analyses, are used to track eruption dynamics to help facilitate identification and understanding of changes that signal the onset of potentially hazardous activity. In this paper, we present EDXRF methodology for bulk-rock analysis used to evaluate the 2018 Kīlauea and 2022 Mauna Loa eruptions and compare this technique to other geochemical methods. Syn-eruption geochemical monitoring using EDXRF provides reliable quantitative data that is important for understanding eruption dynamics. Critical to this process are calibrating the instrument for analysis over the same range of compositions expected during volcanic activity, compiling a relevant database from past eruptions on the same instrument for comparison, and having the physical infrastructure and trained personnel to complete the analyses in a timely fashion. In addition to the scientific goals of petrologic monitoring, near-real-time geochemical analysis in Hawaii provides important information about the nature of on-going eruptions and informs decision-makers and the public about associated evolving hazards.

Hawaii↗
USGS2015

A quick SEED tutorial

Introduction A number of different government-funded seismic data centers offer free open-access data (e.g., U.S. Geological Survey, National Earthquake Information Center, the Incorporated Research Institutions for Seismology (IRIS), and Data Management System), which can be freely downloaded and shared among different members of the community ( Lay, 2009 ). To efficiently share data, it is important that different data providers follow a common format. The Standard for the Exchange of Earthquake Data (SEED) provides one such format for storing seismic and other geophysical data. The SEED format is widely used in earthquake seismology; however, SEED and its structure can be difficult for many first-time users (ourselves included). Below is a quick tutorial that outlines the basic structure of SEED format. This write-up is in no way intended to replace the comprehensive SEED manual ( Ahern et al. , 2009 ), and instead of going into the details of any specific part of the SEED format we refer the reader to the manual for additional details. The goal of this write-up is to succinctly explain the basic structure of SEED format as well as the associated jargon, as most commonly used now, in a colloquial way so that novice users of SEED can become more familiar with the format and its application quickly. Our goal is to give the reader the necessary background so that when problems or questions about SEED format arise they will have some understanding of where they should look for more details or from where the problem might be stemming. As a secondary goal, we hope to help the reader become familiar with the SEED manual ( Ahern et al. , 2009 ), which contains detailed information about all aspects of the SEED format.

Seismological Research Letters↗
USGS2023

Multiple-well monitoring site adjacent to the Elk Hills Oil Field, Kern County, California

Introduction The Elk Hills Oil Field is one of the many fields selected for regional groundwater mapping and monitoring by the California State Water Resources Control Board as part of the Oil and Gas Regional Monitoring Program (California State Water Resources Control Board, 2015, 2022b; U.S. Geological Survey, 2022a). The U.S. Geological Survey (USGS), in cooperation with the California State Water Resources Control Board, is evaluating groundwater resources near areas of oil and gas development in California, including (1) the location of groundwater resources near oil fields; (2) the proximity of oil and gas operations to groundwater, and the geologic materials between them; (3) evidence (or lack of evidence) of fluids from oil and gas sources in groundwater; and (4) the pathways or processes responsible when fluids from oil and gas sources are present in groundwater (U.S. Geological Survey, 2022a). As part of this evaluation, the USGS installed a multiple-well monitoring site near the administrative boundary of the Elk Hills Oil Field in the southern San Joaquin Valley about 6 miles northeast of Taft, California (California Department of Water Resources, 2020; fig. 1). Data collected at the Elk Hills multiple-well monitoring site (ELKH) provide information about the geology, hydrology, geophysical properties, and water quality of the aquifer system, thus enhancing the understanding of relations between adjacent groundwater and the Elk Hills Oil Field in an area where groundwater data are limited, particularly at different depths in the aquifer. This report presents construction information for the ELKH and initial geohydrologic data collected from the site. Similar sites installed on the east side of the Lost Hills Oil Field, on the east side of the North and South Belridge Oil Fields, and within the Poso Creek Oil Field were described by Everett and others (2020a, b, 2023).

California↗
USGS2009

A comparison of phase inversion and traveltime tomography for processing near-surface refraction traveltimes

With phase inversion, one can estimate subsurface velocities using the phases of first-arriving waves, which are the frequency-domain equivalents of the traveltimes. Phase inversion is modified to make it suitable for processing traveltimes from near-surface refraction surveys. The modifications include parameterizing the model, correcting the observed phases, and selecting the complex frequency. This modified phase inversion is compared to traveltime tomography. For two comparisons using computer-simulated traveltimes, the difference between the estimated and correct models, the residual mean, and the residual standard deviation are smaller for the phase inversion than they are for the traveltime tomography. For a comparison using field data from an S-wave refraction survey, both methods estimate models that are consistent with the known geology. Nonetheless, the phase-inversion model includes small-scale features in the bedrock that are geologically plausible; the residual mean and the residual standard deviation are smaller for the phase inversion than they are for the traveltime tomography.

Geophysical Journal↗
USGS2013

Preliminary stratigraphic and hydrogeologic cross sections and seismic profile of the Floridan aquifer system of Broward County, Florida

To help water-resource managers evaluate the Floridan aquifer system (FAS) as an alternative water supply, the U.S. Geological Survey initiated a study, in cooperation with the Broward County Environmental Protection and Growth Management Department, to refine the hydrogeologic framework of the FAS in the eastern part of Broward County. This report presents three preliminary cross sections illustrating stratigraphy and hydrogeology in eastern Broward County as well as an interpreted seismic profile along one of the cross sections. Marker horizons were identified using borehole geophysical data and were initially used to perform well-to-well correlation. Core sample data were integrated with the borehole geophysical data to support stratigraphic and hydrogeologic interpretations of marker horizons. Stratigraphic and hydrogeologic units were correlated across the county using borehole geophysical data from multiple wells. Seismic-reflection data were collected along the Hillsboro Canal. Borehole geophysical data were used to identify and correlate hydrogeologic units in the seismic-reflection profile. Faults and collapse structures that intersect hydrogeologic units were also identified in the seismic profile. The information provided in the cross sections and the seismic profile is preliminary and subject to revision.

Florida↗
USGS1998

Radar attenuation tomography using the centroid frequency downshift method

A method for tomographically estimating electromagnetic (EM) wave attenuation based on analysis of centroid frequency downshift (CFDS) of impulse radar signals is described and applied to cross-hole radar data. The method is based on a constant- Q model, which assumes a linear frequency dependence of attenuation for EM wave propagation above the transition frequency. The method uses the CFDS to construct the projection function. In comparison with other methods for estimating attenuation, the CFDS method is relatively insensitive to the effects of geometric spreading, instrument response, and antenna coupling and radiation pattern, but requires the data to be broadband so that the frequency shift and variance can be easily measured. The method is well-suited for difference tomography experiments using electrically conductive tracers. The CFDS method was tested using cross-hole radar data collected at the U.S. Geological Survey Fractured Rock Research Site at Mirror Lake, New Hampshire (NH) during a saline-tracer injection experiment. The attenuation-difference tomogram created with the CFDS method outlines the spatial distribution of saline tracer within the tomography plane.

Journal of Applied Geophysics↗
USGS2014

Gravity, magnetic, and radiometric data for Newberry Volcano, Oregon, and vicinity

Newberry Volcano in central Oregon is a 3,100-square-kilometer (1,200-square-mile) shield-shaped composite volcano, occupying a location east of the main north-south trend of the High Cascades volcanoes and forming a transition between the High Lava Plains subprovince of the Basin and Range Province to the east and the Cascade Range to the west. Magnetic, gravity, and radiometric data have been gathered and assessed for the region around the volcano. These data have widely varying quality and resolution, even within a given dataset, and these limitations are evaluated and described in this release. Publicly available gravity data in general are too sparse to permit detailed modeling except along a few roads with high-density coverage. Likewise, magnetic data are also unsuitable for all but very local modeling, primarily because available data consist of a patchwork of datasets with widely varying line-spacing. Gravity data show only the broadest correlation with mapped geology, whereas magnetic data show moderate correlation with features only in the vicinity of Newberry Caldera. At large scales, magnetic data correlate poorly with both geologic mapping and gravity data. These poor correlations are largely due to the different sensing depths of the two potential fields methods, which respond to physical properties deeper than the surficial geology. Magnetic data derive from rocks no deeper than the Curie-point isotherm depth (10 to 15 kilometers, km, maximum), whereas gravity data reflect density-contrasts to 100 to 150 km depths. Radiometric data from the National Uranium Resource Evaluation (NURE) surveys of the 1980s have perhaps the coarsest line-spacing of all (as much as 10 km between lines) and are extremely “noisy” for several reasons inherent to this kind of data. Despite its shallow-sensing character, only a few larger anomalies in the NURE data correlate well with geologic mapping. The purpose of this data series release is to collect and place the available geophysical data in the hands of other investigators in a readily comprehensible form. All data-compilation, splicing, filtering, and overlay-map displays were accomplished with the commercial Geosoft™ system, Advanced Option. Images are provided in both JPG and PDF formats.

Oregon↗
USGS2006

Compilation of water-resources data and hydrogeologic setting for four research stations in the Piedmont and Blue Ridge Physiographic Provinces of North Carolina, 2000—2004

Water-resources data were collected to describe the hydrologic conditions at four research stations in the Piedmont and Blue Ridge Physiographic Provinces of North Carolina. Data collected by the U.S. Geological Survey and the North Carolina Department of Environment and Natural Resources, Division of Water Quality, from September 2000 through September 2004 are presented in this report. The locations and periods of data collection are as follows: the Lake Wheeler Road research station (Raleigh) from April 2001 to September 2004, the Langtree Peninsula research station (Mooresville) from September 2000 to September 2004, the Upper Piedmont research station (Reidsville) from March 2002 to September 2004, and the Bent Creek research station (Asheville) from July 2002 to September 2004. Data presented in this report include well-construction characteristics for 110 wells, periodic ground-water-level measurements for 96 wells, borehole geophysical logs for 23 wells, hourly ground-water-level measurements for 12 wells, continuous-stage measurements for 2 streams, continuous water-quality measurements for 8 wells and 2 streams, periodic water-quality samples for 57 wells and 6 stream sites, slug-test results for 38 wells, and shallow ground-water-flow maps. In addition, the geology and hydrogeology at each site are summarized.

North Carolina↗
USGS2024

Simulation of groundwater flow in the Long Island, New York regional aquifer system for pumping and recharge conditions from 1900 to 2019

The U.S. Geological Survey has developed a transient, groundwater-flow model that simulates hydrologic conditions in the Long Island aquifer system as part of an ongoing (since 2016) multiyear, cooperative investigation with the New York State Department of Environmental Conservation. The goals of this investigation are to assist stakeholders and resource managers to evaluate the response of the hydrologic system to changes in future hydraulic stresses. Responses in the hydrologic system include changes in water levels in the hydrogeologic units; discharge to streams, coastal waters, and subsurface infrastructure; and the extent of saline groundwater in the aquifers. Hydraulic stresses include future water-supply management and changes in land use and infrastructure. The numerical model synthesizes a diverse set of physiographic, geologic, climatic, land-use, and historical population, water use, and infrastructure data to physically represent the Long Island aquifer system from land surface to bedrock and to simulate annual hydrologic conditions between 1900 and 2019. A three-dimensional hydrogeologic framework was developed from existing and recently collected borehole geologic and geophysical data collected as part of a companion drilling program. Water-transmitting properties of the principal aquifer sediments were defined in three dimensions from new and existing lithologic logs. The distribution of recharge from precipitation was estimated from landscape characteristics and climate data. Anthropogenic recharge from wastewater, leaky infrastructure, and storm runoff were estimated from population, infrastructure, and pumping data. Water-use data, including well locations, depths, and pumping rates, were obtained from historical sources and records and used to estimate pumping stresses continuously in time and space, at an annual average time scale. The data were incorporated into a three-dimensional numerical model using the U.S. Geological Survey finite difference modeling code MODFLOW 6; the model encompassed all of Long Island and surrounding surface waters and simulated historical hydrologic conditions from 1900 to 2019. The calibration process involved trial and error adjustments using prior knowledge to improve general fit to observations followed by an inverse calibration to update and optimize input parameters, using an iterative ensemble smoother algorithm implemented in PEST++ version 5.0. This resulted in a model that generally was in good agreement with observed, dynamically varying hydrologic conditions from 1900 to 2019. The calibrated model was used to develop two base-case models for scenario testing of future, hypothetical conditions where one represented average-annual conditions, and one represented average-seasonal conditions from 2010 to 2019. The model representing average-annual conditions was modified further to represent an alternate sea-level position of 6 feet above the North American Vertical Datum of 1988, and the model representing average-seasonal conditions was modified to represent the average seasonal effects of a 5-year drought imposed upon current hydrologic conditions. Recharge is the sole source of water to the aquifer system; groundwater discharges to coastal water and streams and is withdrawn by pumped wells. Model-estimated annual recharge ranged from about 11 inches in 1965 to 41 inches in 1983. On average, from 2010 to 2019, about 23 percent of water was pumped from wells, and about 47 and 27 percent discharged to coastal waters and streams, respectively; the remaining 4 percent was water that moved into storage in the aquifer matrix. Water levels on Long Island vary naturally during time in response to changes in recharge; the amount of variation is largest in the interior of the island, in areas with highest water table altitudes near groundwater divides and lowest near streams and the coastal waters. The total range of water table altitudes on Long Island between 1900 and 2019 ranged from near 0 to more than 70 feet in western parts of Long Island. The largest range in altitudes is in New York City and is associated with areas of large historical withdrawals between the 1920s and the late 1980s. Water table altitudes generally varied by less than 10 feet in eastern Suffolk County, where the aquifer is under more natural conditions. Saltwater intrusion is of great concern on Long Island, particularly in western Long Island where both the unconfined and confined parts of the aquifer system have been intruded in response to large-scale groundwater withdrawals; however, the volume of freshwater in the islandwide aquifer system only has changed by about 5 percent between 1900 and 2019. The decadal change in the freshwater volume was largest during the early and mid-20th century, corresponding to the largest historical pumping, but that volume change did not exceed 1 percent. The negligible change in freshwater volume suggests that saltwater intrusion as of 2019 was limited at an islandwide scale but continues to occur in local areas of Queens and Nassau Counties, adversely affecting current water supplies and limiting future water supplies for affected communities. The regional groundwater model developed for this investigation is a tool that can be used to help determine the viability of current and future water supplies at a regional scale and can be used to support development of additional models at finer scale to support more focused assessments of groundwater sustainability.

New York↗
USGS2012

Real-time forecasting of the April 11, 2012 Sumatra tsunami

The April 11, 2012, magnitude 8.6 earthquake off the northern coast of Sumatra generated a tsunami that was recorded at sea-level stations as far as 4800 km from the epicenter and at four ocean bottom pressure sensors (DARTs) in the Indian Ocean. The governments of India, Indonesia, Sri Lanka, Thailand, and Maldives issued tsunami warnings for their coastlines. The United States' Pacific Tsunami Warning Center (PTWC) issued an Indian Ocean-wide Tsunami Watch Bulletin in its role as an Interim Service Provider for the region. Using an experimental real-time tsunami forecast model (RIFT), PTWC produced a series of tsunami forecasts during the event that were based on rapidly derived earthquake parameters, including initial location and Mwp magnitude estimates and the W-phase centroid moment tensor solutions (W-phase CMTs) obtained at PTWC and at the U. S. Geological Survey (USGS). We discuss the real-time forecast methodology and how successive, real-time tsunami forecasts using the latest W-phase CMT solutions improved the accuracy of the forecast.

Sumatra↗
USGS2001

The STRATAFORM Project: U.S. Geological Survey geotechnical studies

This report presents physical property logs of core samples from an offshore area near Eureka, CA. The cores were obtained as part of the STRATAFORM Program (Nittrouer and Kravitz, 1995, 1996), a study investigating how present sedimentation and sediment transport processes influence long-term stratigraphic sequences preserved in the geologic record. The core samples were collected during four separate research cruises to the northern California study area, and data shown in the logs of the cores were collected using a multi-sensor whole core logger. The physical properties collected are useful in identifying stratigraphic units, ground-truthing acoustic imagery and sub-bottom profiles, and in understanding mass movement processes. STRATA FOR mation on M argins was initiated in 1994 by the Office of Naval Research, Marine Geology and Geophysics Department as a coordinated multi-investigator study of continental-margin sediment transport processes and stratigraphy (Nittrouer and Kravitz, 1996). The program is investigating the stratigraphic signature of the shelf and slope parts of the continental margins, and is designed to provide a better understanding of the sedimentary record and a better prediction of strata. Specifically, the goals of the STRATAFORM Program are to (Nittrouer and Kravitz, 1995): - determine the geological relevance of short-term physical processes that erode, transport, and deposit particles and those processes that subsequently rework the seabed over time scales <10 2 years. - improve capabilities for identifying the processes that form the strata observed within the upper ~100 m of the seabed commonly representing 104-106 years of sedimentation. - synthesize this knowledge and bridge the gap between time scales of sedimentary processes and those of sequence stratigraphy. The STRATAFORM Program is divided into studies of the continental shelf and the continental slope; the geotechnical group within the U.S. Geological Survey provides support to both parts of the project.

California↗
USGS2026

Quantitative mineral resource assessment of lithium pegmatite deposits in the northern Appalachian orogen, USA

Lithium demand is projected to increase more than 48 times by 2040 due to electric vehicle production and other energy storage needs. Most lithium production is outside of the USA, thereby increasing supply chain vulnerability. The combined end use importance and heightened supply risk of lithium make this lightest metallic element a critical commodity to the USA. To mitigate this supply risk, the US Geological Survey is actively assessing lithium deposits in the USA. Herein, we detail an assessment for lithium-mineralized pegmatites in the US northern Appalachian Mountains. Permissive tracts were generated by cross-referencing tectonic and geologic maps and mineral occurrence data with mappable criteria derived from generalized and region-specific lithium pegmatite ore deposit models; tracts were then ranked as having high, medium, or low permissibility. Available geophysical and geochemical data were found to be of minimal utility for this deposit type at the scale of the assessment. The number of undiscovered deposits were estimated and integrated into probabilistic simulations, which included an expanded and updated global grade and tonnage model of pegmatite-hosted lithium ore. The estimated total amount of undiscovered resources for the northern Appalachian Orogen has a median value of 1,410,000 metric tons of Li 2 O when considering moderate correlation across sub-regions. At a confidence level of 90%, a resource of at least 90,000 metric tons of Li 2 O remains undiscovered, and at a 10% confidence level, a resource of as much as 7,380,000 metric tons Li 2 O remains undiscovered. After applying an up-to-date economic filter to convert median contained lithium to recoverable material, a correlated total of 900,000 metric tons of Li 2 O may be economically extractable, equating to enough Li 2 O to provide the current annual US lithium supply deficit (presently obtained through net imports) for 127 years at 2025 rates of apparent consumption. This period of provision will inevitably shorten with projected increasing consumption rates, emphasizing that further research could be completed to better delineate regions of high lithium resource potential and support exploration and domestic production.

Connecticut, Delaware, Maine, Massachusetts, New H↗
USGS2001

Hydrogeology and ground-water quality of the county road a disposal site on the Bad River Indian Reservation, Ashland County, Wisconsin: 1997-98

The County Road A disposal site, located on the Bad River Indian Reservation, Ashland County, Wisconsin, contains papermill sludge generated by a former mill in the City of Ashland. Since the time of disposal (1968-1970) the site has been the subject of investigations by the U.S. Bureau of Indian Affairs, the U.S. Environmental Protection Agency, and private consultants. During 1997- 1998, an investigation was conducted by the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency and the Natural Resources Department of the Bad River Indian Tribe, to evaluate the hydrogeology and groundwater quality of the disposal site, particularly with respect to the hydraulic connection between two ponds at the site and the shallow ground-waterflow system. Additional monitoring wells and well points were installed, and additional hydrogeologic, ground-water quality, and geophysical data were collected. The data from this and previous studies were integrated and interpreted.

Wisconsin↗
USGS2014

Report of the committee on chemistry of natural waters, 1936–37

The membership of this Committee is as follows: C. S. Howard, Chairman, U. S. Geological Survey, Washington, D.C. D. G. Thompson, U. S. Geological Survey, Washington, D.C. A. C. Lane, 22 Arlington Street, Cambridge, Massachusetts C. S. Scofield, Bureau of Plant Industry, U. S. Dept. Agri., Washington, D. C. I. A. Denison, U.S. Bureau of Standards, Washington, D.C. T. G. Thompson, University of Washington, Seattle, Washington W. P. Kelley, Citrus Experiment Station, Riverside, California In order to provide for close cooperation between the work of the different research‐committees of the American Geophysical Union it was decided to have the chairmen of certain committees serve on other committees. The Chairman of the Committee on the Chemistry of Natural Waters is serving on the Committee of Underground waters and D. G. Thompson as Chairman of the Committee on Underground Waters is serving on the Committee on Chemistry of Natural Waters

Eos, Transactions, American Geophysical Union↗
USGS1983

Strain accumulation in western United States

This review is principally concerned with recent geodetic strain measurements in western United States undertaken by the US Geological Survey as part of the earthquake studies program and, as a consequence, is heavily biased toward the author's own publications. Most of the publications reporting crustal-strain measurements in western United States prior to about 1968 have been compiled in one volume (National Geodetic Survey 1973), and more recent work (with complete bibliographies) is summarized in three successive quadrennial reports to the International Union of Geodesy and Geophysics (Meade 1971, Savage 1975, Thatcher 1979b). The following conventions are employed in this paper: Strain, a dimensionless quantity, is reported in units of 10 6 Extension is taken as positive. To distinguish between engineering and tensor shear strain, we denote the former by γ and quote the units as μr ad, whereas the latter is denoted by e and given the units of μ strain. Uncertainties in all cases are quoted as ± one standard deviation.

California↗
USGS1996

Neogene and Quaternary geology of a stratigraphic test hole on Horn Island, Mississippi Sound

During April and May, 1991, the U.S. Geological Survey (USGS) drilled a 510-ft-deep, continuously cored, stratigraphic test hole on Horn Island, Mississippi Sound, as part of a field study of the Neogene and Quaternary geology of the Mississippi coastal area. The USGS drilled two new holes at the Horn Island site. The first hole was continuously cored to a depth of 510 ft; coring stopped at this depth due to mechanical problems. To facilitate geophysical logging, an unsampled second hole was drilled to a depth of 519 ft at the same location.

Open-File Report↗
USGS2009

Apparent Resistivity and Estimated Interaction Potential of Surface Water and Groundwater along Selected Canals and Streams in the Elkhorn-Loup Model Study Area, North-Central Nebraska, 2006-07

In 2005, the State of Nebraska adopted new legislation that in part requires local Natural Resources Districts to include the effect of groundwater use on surface-water systems in their groundwater management plan. In response the U.S. Geological Survey, in cooperation with the Upper Elkhorn, Lower Elkhorn, Upper Loup, Lower Loup, Middle Niobrara, Lower Niobrara, Lewis and Clark, and Lower Platte North Natural Resources Districts, did a study during 2006-07 to investigate the surface-water and groundwater interaction within a 79,800-square-kilometer area in north-central Nebraska. To determine how streambed materials affect surface-water and groundwater interaction, surface geophysical and lithologic data were integrated at four sites to characterize the hydrogeologic conditions within the study area. Frequency-domain electromagnetic and waterborne direct- current resistivity profiles were collected to map the near-surface hydrogeologic conditions along sections of Ainsworth Canal near Ainsworth, Nebraska; Mirdan and Geranium Canals near Ord, Nebraska; North Loup River near Ord, Nebraska; and Middle Loup River near Thedford, Nebraska. Lithologic data were collected from test holes at each site to aid interpretation of the geophysical data. Geostatistical analysis incorporating the spatial variability of resistivity was used to account for the effect of lithologic heterogeneity on effective hydraulic permeability. The geostatistical analysis and lithologic data descriptions were used to make an interpretation of the hydrogeologic system and derive estimates of surface-water/groundwater interaction potential within the canals and streambeds. The estimated interaction potential at the Ainsworth Canal site and the Mirdan and Geranium Canal site is generally low to moderately low. The sediment textures at nearby test holes typically were silt and clay and fine-to-medium sand. The apparent resistivity values for these sites ranged from 2 to 120 ohm-meters. The vertical and horizontal variability of the apparent resistivity data were consistently low. Low resistive variability indicates little lithologic heterogeneity for either canal site. The surface-water/groundwater interaction-potential estimates are in agreement with the narrow frequency distribution of resistivity, low apparent resistivities, low spatial heterogeneity, and test-hole grain-size ranges. The estimated surface-water/groundwater interaction potential at the North Loup and Middle Loup River sites is moderate to moderately high. The sediment textures at nearby test holes were predominantly fine, medium, and coarse sand with some silt and silty to sandy clay. The apparent resistivity values for these sites ranged from 34 to 1,338 ohm-meters. The vertical variability of the resistivity data was moderately high. The horizontal variability at these sites is low to moderately low. The higher resistive variability at these sites indicates generally greater lithologic heterogeneity than at either the Ainsworth Canal site or the Mirdan and Geranium Canal site. The surface-water/groundwater interaction-potential estimates are in agreement with the generally moderate to high apparent resistivity, the greater spatial heterogeneity, and the variable lithologic texture. A higher interaction potential as compared to the canal sites is expected because of the higher subsurface resistivity and greater lithologic heterogeneity.

Scientific Investigations Report↗