Search USGS⌕ Search

SEARCH · Search USGS

Results for “Geophysical Investigations Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76Linked to original sources
USGS2009

Uncertainty analysis for seismic hazard in Northern and Central Italy

In this study we examine uncertainty and parametric sensitivity of Peak Ground Acceleration (PGA) and 1-Hz Spectral Acceleration (1-Hz SA) in probabilistic seismic hazard maps (10% probability of exceedance in 50 years) of Northern and Central Italy. The uncertainty in hazard is estimated using a Monte Carlo approach to randomly sample a logic tree that has three input-variables branch points representing alternative values for b-value, maximum magnitude (Mmax) and attenuation relationships. Uncertainty is expressed in terms of 95% confidence band and Coefficient Of Variation (COV). The overall variability of ground motions and their sensitivity to each parameter of the logic tree are investigated. The largest values of the overall 95% confidence band are around 0.15 g for PGA in the Friuli and Northern Apennines regions and around 0.35 g for 1-Hz SA in the Central Apennines. The sensitivity analysis shows that the largest contributor to seismic hazard variability is uncertainty in the choice of ground-motion attenuation relationships, especially in the Friuli Region (???0.10 g) for PGA and in the Friuli and Central Apennines regions (???0.15 g) for 1-Hz SA. This is followed by the variability of the b-value: its main contribution is evident in the Friuli and Central Apennines regions for both 1-Hz SA (???0.15 g) and PGA (???0.10 g). We observe that the contribution of Mmax to seismic hazard variability is negligible, at least for 10% exceedance in 50-years hazard. The overall COV map for PGA shows that the uncertainty in the hazard is larger in the Friuli and Northern Apennine regions, around 20-30%, than the Central Apennines and Northwestern Italy, around 10-20%. The overall uncertainty is larger for the 1-Hz SA map and reaches 50-60% in the Central Apennines and Western Alps.

Annals of Geophysics↗
USGS2017

Stratigraphic cross sections of the Niobrara interval of the Cody Shale and associated rocks in the Wind River Basin, central Wyoming

The Wind River Basin in Wyoming is one of many structural and sedimentary basins that formed in the Rocky Mountain foreland during the Laramide orogeny. The basin is nearly 200 miles long, 70 miles wide, and encompasses about 7,400 square miles in central Wyoming. The basin is bounded by the Washakie Range, Owl Creek uplift, and southern Bighorn Mountains on the north, the Casper arch on the east, the Granite Mountains on the south, and Wind River Range on the west. Many important conventional oil and gas fields producing from reservoirs ranging in age from Mississippian through Tertiary have been discovered in this basin. In addition, an extensive unconventional overpressured basin-centered gas accumulation has been identified in Cretaceous and Tertiary strata in the deeper parts of the basin. It has long been suggested that various Upper Cretaceous marine shales, including the Cody Shale, are the principal hydrocarbon source rocks for many of these accumulations. With recent advances and success in horizontal drilling and multistage fracture stimulation, there has been an increase in exploration and completion of wells in these marine shales in other Rocky Mountain Laramide basins that were traditionally thought of only as hydrocarbon source rocks. The two stratigraphic cross sections presented in this report were constructed as part of a project carried out by the U.S. Geological Survey to characterize and evaluate the undiscovered continuous (unconventional) oil and gas resources of the Niobrara interval of the Upper Cretaceous Cody Shale in the Wind River Basin in central Wyoming. The primary purpose of the cross sections is to show the stratigraphic relationship of the Niobrara equivalent strata and associated rocks in the lower part of the Cody Shale in the Wind River Basin. These two cross sections were constructed using borehole geophysical logs from 37 wells drilled for oil and gas exploration and production, and one surface section along East Sheep Creek near Shotgun Butte in the northwestern part of the basin. Both lines originate at the East Sheep Creek surface section and end near Clarkson Hill in the extreme southeastern part of the basin. The stratigraphic interval extends from the upper part of the Frontier Formation to the middle part of the Cody Shale. The datum is the base of the “chalk kick” marker bed, a distinctive resistivity peak or zone in the lower part of the Cody Shale. A gamma ray and (or) spontaneous potential (SP) log was used in combination with a resistivity log to identify and correlate units. Marine molluscan index fossils collected from nearby outcrop sections were projected into the subsurface to help determine the relative ages of the strata and aid in correlation.

Wyoming↗
USGS1967

Effects of the earthquake of March 27, 1964, at Seward, Alaska

Seward, in south-central Alaska, was one of the towns most devastated by the Alaska earthquake of March 27, 1964. The greater part of Seward is built on an alluvial fan-delta near the head of Resurrection Bay on the southeast coast of the Kenai Peninsula. It is one of the few ports in south-central Alaska that is ice free all year, and the town’s economy is almost entirely dependent upon its port facilities. The Alaska earthquake of March 27, 1964, magnitude approximately 8.3–8.4, began at 6:36 p.m. Its epicenter was in the northern part of the Prince William Sound area; focal depth was 20–50 km. Strong ground motion at Seward lasted 3–4 minutes. During the shaking, a strip of land 50–400 feet wide along the Seward waterfront, together with docks and other harbor facilities, slid into Resurrection Bay as a result of large-scale submarine landsliding. Fractures ruptured the ground for'severa1 hundred feet back from the landslide scarps. Additional ground was fractured in the Forest Acres subdivision and on the alluvial floor of the Resurrection River valley; fountaining and sand boils accompanied the ground fracturing. Slide-generated wares, possibly seiche waves, and seismic sea waves crashed onto shore; ware runup was as much as 30 feet above mean lower low water and caused tremendous damage; fire from burning oil tanks added to the destruction. Damage from strong ground motion itself was comparatively minor. Tectonic subsidence of about 3.6 feet resulted in low areas being inundated at high tide. Thirteen people were killed and five were injured as a result of the earthquake. Eighty-six houses were totally destroyed and 260 were heavily damaged. The harbor facilities were almost completely destroyed, and the entire economic base of the town was wiped out. The total cost to replace the destroyed public and private facilities was estimated at $22 million. Seward lies on the axis of the Chugach Mountains geosyncline. The main structural trend in the mapped area, where the rocks consist almost entirely of graywacke and phyllite, is from near north to N. 20° E. Beds and cleavage of the rocks commonly dip 70° W. or NW. to near vertical. Locally, the rocks are complexly folded or contorted. So major faults were found in the mapped area, but small faults, shear zones, and joints are common. Surficial deposits of the area hare been divided for mapping into the following units: drift deposits, alluvial fan deposits, valley alluvium, intertidal deposits, landslide deposits, and artificial fill. Most of these units intergrade and were deposited more or less contemporaneously. The drift deposits consist chiefly of till that forms moraines along the lower flanks of the Resurrection River valley and up tributary valleys. The till is predominantly silt and sand and lesser amounts of clay-size particles, gravel, cobbles, and boulders. Glacial outwash and stratified ice-contact deposits constitute the remainder of the drift deposits. Fans and fan-deltas have been deposited at the valley mouths of tributary streams. Some, including the one upon which Seward built, project into Resurrection Bay, and deltaic-type deposits form their distal edges. The larger fans—composed chiefly of loosely compacted and poorly sorted silt, sand, and gravel—form broad aprons having low gradients. The fan deposits range in thickness from about 100 feet to possibly several hundred feet and, at least in some places, lie on a platform of compact drift. Smaller fans at the mouths of several canyons have steep gradients and considerable local relief. Valley alluvium, deposited chiefly by the Resurrection River, consists mostly of coarse sand and fine to medium gravel. In the axial part of the valley it is probably more than 100 feet thick. Near the head of Resurrection Bay, the alluvium is underlain by at least 75 feet of marine deltaic sediments, which are in turn underlain by 600 or more feet of drift in the deepest part of the bedrock valley. Beach, deltaic, and estuarine sediments, deposited on intertidal flats at the head of the bay and along far1 margins that extend into the bay, arc mapped as intertidal deposits. They consist mostly of silt, sand, and fine gravel, and lesser amounts of clay-size particles. The earthquake reactivated old slides and trigged new ones in the mountains. Rock and snow avalanches, debris flows, and creep of talus deposits characterized slide activity on the steeper slops. The Seward waterfront had been extended before the earthquake by adding artificial fill consisting of loose sand and gravel; part of the lagoon area had been filled with refuse. After the earth- quake, fill, consisting of silt and sand dredged from the head of the bay, was pumped onto part of the lagoon area and also on land at the northwest corner of the bay. Response to the disaster was immediate and decisive. City, State, and Federal agencies, as well as other organizations and individuals, gave unstintingly of their time and facilities. Within a few days, there was temporary restoration of water, sewerage, and electrical facilities. The U.S. Army Corps of Engineers was authorized to select sites and construct a new dock for the Alaska Railroad, a new small-boat basin, and related facilities. The firm of Shannon and Wilson, Inc., under contract to the Corps of Engineers, investigated subsurface soils extensively to determine the factors responsible for the sliding along the Seward waterfront and to assist in site selection for reconstruction of the destroyed harbor facilities. Borings also made along the Seward waterfront and at the head of the bay, and laboratory tests were conducted on pertinent samples. These studies were augmented by geophysical studies both on land and in the bay. In addition, the Corps of Engineers made shallow borings on the intertidal flats at the head of the bay and performed pile-driving and load tests. Borings also were drilled and test pits were dug in the subdivision of Forest Acres. Sliding along the Seward waterfront markedly deepened the water along the former shoreline. Post-earthquake slopes of the bay floor immediately offshore also are steeper in places than before the earthquake. The strong ground motion of the earthquake triggered the landsliding, but several factors may have contributed to the magnitude and characteristics of the slides. These factors are: (1) the long duration of strong ground motion, (2) the grain size and texture of the material involved in the sliding, (3) the probability that the finer grained materials liquefied and flowed seaward, and (4) the added load of manmade facilities built on the edge of the shore, Secondary effects of the slides themselves—sudden drawdown of water, followed by the weight of returning waves—also may have contributed to the destruction. Submarine sliding at the northwest corner of the bay occurred in fine-grained deltaic deposits whose frontal slopes probably were in metastable equilibrium under static conditions. Uplift pressures from aquifers under hydrostatic head, combined with the probable liquefaction characteristics of the sediments when vibrated by strong ground motion, probably caused the material to slide and flow seaward as a heavy slurry. Under static conditions, no major shoreline or submarine landsliding is expected in the Seward area; in the event of another severe earthquake, however, additional sliding is likely along the Seward waterfront and also in the deltaic deposits at the northwest corner of the bay. Fractured ground in back of the present shoreline along the Seward waterfront is an area of incipient landslides that would be unstable under strong shaking. For this reason the Scientific and Engineering Task Force placed the area in a high-risk classification and recommended no repair, rehabilitation, or new construction in this area involving use of Federal funds; it was further recommended that the area should be reserved for park or other uses that do not involve large congregations of people. The deltaic deposits at the head of the bay probably also would be susceptible to sliding during another large earthquake. This sliding would result in further landward retreat of the present shoreline toward the new railroad dock. Specifications for the new dock, whose seaward end is now approximately 1,100 feet from the back scarp of the subaqueous landslide, require design pro- visions to withstand seismic shock up to certain limits. Earthquake-induced fracturing of the ground in the subdivision of Forest Acres was confined to the lower part of a broad alluvial fan. There, sewer and water lines were ruptured and the foundations of some homes were heavily damaged. Landsliding, such as occurred along the shoreline of the bay, was not a contributing cause of the fracturing. Two hypotheses are offered to explain the fracturing: 1. Seismic energy was transformed into visible surface waves of such amplitude that the strength of surface layer was exceeded and rupturing occurred; tensional and compressional stresses alternately opened and closed the fractures and forced out water and mud. 2. Compaction by vibration of the fine-grained deposits of the fan caused ground settlement and fracturing; ground water under temporary hydrostatic head was forced to the surface as fountains and carried the finer material with it. Water waves that crashed onto shore, while shaking was still continuing, were generated chiefly by onshore and offshore landsliding. Waves that overran the shores about 25 minutes after shaking stopped and that continued to arrive for the next several hours are believed to be seismic sea waves (tsunamis) that originated in an uplifted area in the Gulf of Alaska. During the time of seismic sea-wave activity and perhaps preceding it, seiche wares also may have been generated within Resurrection Bay and complicated the wave effects along the shoreline.

Alaska↗
USGS2012

Tracking lava flow emplacement on the east rift zone of Kilauea, Hawai’i with synthetic aperture radar (SAR) coherence

Lava flow mapping is both an essential component of volcano monitoring and a valuable tool for investigating lava flow behavior. Although maps are traditionally created through field surveys, remote sensing allows an extraordinary view of active lava flows while avoiding the difficulties of mapping on location. Synthetic aperture radar (SAR) imagery, in particular, can detect changes in a flow field by comparing two images collected at different times with SAR coherence. New lava flows radically alter the scattering properties of the surface, making the radar signal decorrelated in SAR coherence images. We describe a new technique, SAR Coherence Mapping (SCM), to map lava flows automatically from coherence images independent of look angle or satellite path. We use this approach to map lava flow emplacement during the Pu‘u ‘Ō‘ō-Kupaianaha eruption at Kīlauea, Hawai‘i. The resulting flow maps correspond well with field mapping and better resolve the internal structure of surface flows, as well as the locations of active flow paths. However, the SCM technique is only moderately successful at mapping flows that enter vegetation, which is also often decorrelated between successive SAR images. Along with measurements of planform morphology, we are able to show that the length of time a flow stays decorrelated after initial emplacement is linearly related to the flow thickness. Finally, we use interferograms obtained after flow surfaces become correlated to show that persistent decorrelation is caused by post-emplacement flow subsidence.

Hawai'i↗
USGS2016

Compilation of V S 30 Data for the United States

V S 30 , the time-averaged shear-wave velocity ( V S ) to a depth of 30 meters, is a key index adopted by the earthquake engineering community to account for seismic site conditions. V S 30 is typically based on geophysical measurements of V S derived from invasive and noninvasive techniques at sites of interest. Owing to cost considerations, as well as logistical and environmental concerns, V S 30 data are sparse or not readily available for most areas. Where data are available, V S 30 values are often assembled in assorted formats that are accessible from disparate and (or) impermanent Web sites. To help remedy this situation, we compiled V S 30 measurements obtained by studies funded by the U.S. Geological Survey (USGS) and other governmental agencies. Thus far, we have compiled V S 30 values for 2,997 sites in the United States, along with metadata for each measurement from government-sponsored reports, Web sites, and scientific and engineering journals. Most of the data in our V S 30 compilation originated from publications directly reporting the work of field investigators. A small subset (less than 20 percent) of V S 30 values was previously compiled by the USGS and other research institutions. Whenever possible, V S 30 originating from these earlier compilations were crosschecked against published reports. Both downhole and surface-based V S 30 estimates are represented in our V S 30 compilation. Most of the V S 30 data are for sites in the western contiguous United States (2,141 sites), whereas 786 V S 30 values are for sites in the Central and Eastern United States; 70 values are for sites in other parts of the United States, including Alaska (15 sites), Hawaii (30 sites), and Puerto Rico (25 sites). An interactive map is hosted on the primary USGS Web site for accessing V S 30 data ( https://earthquake.usgs.gov/data/vs30/us/ ).

Data Series↗
USGS2001

Structural controls on ground-water conditions and estimated aquifer properties near Bill Williams Mountain, Williams, Arizona

As of 1999, surface water collected and stored in reservoirs is the sole source of municipal water for the city of Williams. During 1996 and 1999, reservoirs reached historically low levels. Understanding the ground-water flow system is critical to managing the ground-water resources in this part of the Coconino Plateau. The nearly 1,000-meter-deep regional aquifer in the Redwall and Muav Limestones, however, makes studying or utilizing the resource difficult. Near-vertical faults and complex geologic structures control the ground-water flow system on the southwest side of the Kaibab Uplift near Williams, Arizona. To address the hydrogeologic complexities in the study area, a suite of techniques, which included aeromagnetic, gravity, square-array resistivity, and audiomagnetotelluric surveys, were applied as part of a regional study near Bill Williams Mountain. Existing well data and interpreted geophysical data were compiled and used to estimate depths to the water table and to prepare a potentiometric map. Geologic characteristics, such as secondary porosity, coefficient of anisotropy, and fracture-strike direction, were calculated at several sites to examine how these characteristics change with depth. The 14-kilometer-wide, seismically active northwestward-trending Cataract Creek and the northeastward-trending Mesa Butte Fault systems intersect near Bill Williams Mountain. Several north-south-trending faults may provide additional block faulting north and west of Bill Williams Mountain. Because of the extensive block faulting and regional folding, the volcanic and sedimentary rocks are tilted toward one or more of these faults. These faults provide near-vertical flow paths to the regional water table. The nearly radial fractures allow water that reaches the regional aquifer to move away from the Bill Williams Mountain area. Depth to the regional aquifer is highly variable and depends on location and local structures. On the basis of interpreted audiomagnetotelluric and square-array resistivity sounding curves and limited well data, depths to water may range from 450 to 1,300 meters.

Arizona↗
USGS1997

The distribution of sulfur dioxide and other infrared absorbers on the surface of Io

The Galileo Near Infrared Mapping Spectrometer was used to investigate the distribution and properties of sulfur dioxide over the surface of Io, and qualitative results for the anti‐Jove hemisphere are presented here. SO 2 , existing as a frost, is found almost everywhere, but with spatially variable concentration. The exceptions are volcanic hot spots, where high surface temperatures promote rapid vaporization and can produce SO 2 ‐free areas. The pervasive frost, if fully covering the cold surface, has characteristic grain sizes of 30 to 100 µm, or greater. Regions of greater sulfur dioxide concentrations are found. The equatorial Colchis Regio area exhibits extensive snowfields with large particles (250 to 500 µm diameter, or greater) beneath smaller particles. A weak feature at 3.15 µm is observed and is perhaps due to hydroxides, hydrates, or water. A broad absorption in the 1 µm region, which could be caused by iron‐containing minerals, shows a concentration in Io's southern polar region, with an absence in the Pele plume deposition ring.

Geophysical Research Letters↗
USGS2020

High-resolution airborne geophysical survey of the Shellmound, Mississippi area

In late February to early March 2018, the U.S. Geological Survey acquired 2,364 line-kilometers (km) of airborne electromagnetic, magnetic, and radiometric data in the Shellmound, Mississippi study area. The purpose of this survey is to contribute high-resolution information about subsurface geologic structure to inform groundwater models, water resource infrastructure studies, and local decision making. The Shellmound region hosts a managed aquifer recharge (MAR) pilot project, developed by the Agricultural Research Service of the U.S. Department of Agriculture. The MAR pilot project is investigating the use of bank filtration along the Tallahatchie River as a source for recharge in areas of significant groundwater decline. Direct injection into the Mississippi River Valley Alluvial aquifer (MRVA) occurs about 3 km from the extraction gallery. Understanding the structure of the aquifer, including both shallow and deep confining units, is important for the success of this pilot MAR study and may be even more important for potential future large-scale MAR projects and groundwater model development efforts.

Mississippi↗
USGS1958

Geology and ore deposits of the Monument Valley area, Apache and Navajo counties, Arizona: Part II

In 1951 and 1952, the U.S. Geological Survey conducted a program of uranium investigations and geologic mapping in the Monument Valley area, Apache and Navajo Counties, Ariz. About 700 square miles were mapped on the Navajo Indian Reservation. A resource appraisal of the area was an inherent part of the program, and is detailed in this report. Production of vanadium and uranium is from two areas, the Monument No. 1 mine area in Navajo County, and the Monument No. 2 mine area in Apache County. In the period 1942-53 about 200,300 tons of ore was produced from these two areas. This ore yielded about 1,700,000 pounds of U 3 O 8 and about 6,500,000 pounds of V 2 O 5 . The grade ranged from 0.15 percent U 3 O 8 to 0.60 percent U 3 O 8 , and from 0.38 percent V 2 O 5 to 3.02 percent V 2 O 5 . The vanadium-uranium ratio is about 4:1. The ore deposits are composed principally of the hydrous calcium-uranium vanadate tyuyamunite in basal channel sediments of the Shinarump member off the Chinle formation. Four types of ore bodies are present: (1) rods, (2) tabular ore bodies, (3) corvusite-type ore bodies, and (4) rolls. The reserves of uranium- and vanadium-bearing material are classed as measured, indicated, inferred, and potential. The reserves are further divided into three grade classes for material 1 foot or more thick: (1) 0.10 percent U 3 O 8 and 1.00 percent V 2 O 5 and above; (2) 0.05 percent U 3 O 8 and 0.50 percent V 2 O 5 and less than 0.10 percent U 3 O 8 and 1.00 percent V 2 O 5 ; and (3) 0.01 percent U 3 O 8 and 0.10 percent V 2 O 5 and less than 0.05 percent U 3 O 8 and 0.05 percent V 2 O 5 . Measured reserves as of June 1953, in the Monument Valley area, Arizona, (all in the Monument No. 2 mine) total about 36,000 tons. Indicated reserves in the first grade class amount to about 62,000 tons. In this same grade class inferred reserves total about 3,000,000 tons. In the second grade class indicated and inferred reserves amount to about 2,000,000 tons. Inferred reserves in the third grade class total about 345,000 tons of mineralized material. Potential reserves in all grade classes for the Monument Valley area amount to about 13,000,000 tons. It is recommended that an extensive exploration program be carried out in the Monument Valley area, Arizona. This program would consist of two phases. The first phase would involve a geophysical survey of selected channels and would have at its principal objective the delineation of the trend, length, width, and depth of scour of the channels. The second phase would consist of a diamond-drilling program that would make use of the data secured by the geophysical survey. This drilling program would have as one of its principal objectives the determination of which channels are most likely to contain ore bodies. Once the favorable channels are discovered, the drilling program could be carried on most suitably by private operators.

Arizona↗
USGS2000

Detection of conduit-controlled ground-water flow in northwestern Puerto Rico using aerial photograph interpretation and geophysical methods

The development potential of ground-water resources in the karst limestone of northwestern Puerto Rico, in an area extending from the Río Camuy to Aguadilla, is uncertain as a result of limited knowledge of the location of areas where a high density of cavities (interconnected fractures, conduits, and other dissolution features) might suggest the occurrence of high water yields. The presence in northwestern Puerto Rico of numerous coastal submarine springs, cavernous porosity in some of the wells, and rivers with entrenched and underground paths, indicate that it is probable that water-bearing, subterranean interconnected cavities occur in the area between the Río Camuy and Aguadilla. The number of exploratory wells needed to determine the location of these conduits or zones of enhanced secondary porosity could be substantially reduced if more information were available about the location of these subterranean features, greatly reducing the drilling costs associated with a trial-and-error exploratory process. A 3-year study was conducted by the U.S. Geological Survey, in cooperation with the Puerto Rico Aqueduct and Sewer Authority, to detect the presence of cavities that might suggest the occurrence of conduit-controlled groundwater flow. Aerial photographs, geologic and topographic maps, and field reconnaissance were used to identify such linear terrain features as ridges, entrenched canyons, and fracture traces. Natural potential and gravity geophysical methods were also used. The following sites were selected for the aerial photograph interpretation and geophysical testing: Caimital Bajo uplands and former Ramey Air Force Base in Aguadilla; Quebrada de los Cedros between Aguadilla and Isabela; the University of Puerto Rico Agricultural Experiment Station, Otilio dairy farm, and Pozo Brujo in Isabela; the Monte Encantado area in Moca and Isabela; and the Rio Camuy cave system in Hatillo and Camuy. In general, the degree of success varied with site and the geophysical method used. At some sites such as Pozo Brujo, the University of Puerto Rico Agricultural Experiment Station, and Monte Encantado area, natural potential anomalies strongly suggest the existence of conduits with flowing water. At most sites, however, the results obtained did not clearly reveal the presence of subsurface cavities that might be associated with the occurrence of conduit-controlled ground-water flow. Sites such as the University of Puerto Rico Agricultural Experiment Station, Pozo Brujo, and Quebrada de los Cedros warrant a more detailed analysis, including a test well drilling phase to confirm the presence of suspected high-yield water-bearing zones.

Water-Resources Investigations Report↗
USGS2000

Hydrogeology and simulation of ground-water flow at the Gettysburg Elevator Plant Superfund Site, Adams County, Pennsylvania

Ground water in Triassic-age sedimentary fractured-rock aquifers in the area of Gettysburg, Pa., is used as drinking water and for industrial and commercial supply. In 1983, ground water at the Gettysburg Elevator Plant was found by the Pennsylvania Department of Environmental Resources to be contaminated with trichloroethene, 1,1,1-trichloroethane, and other synthetic organic compounds. As part of the U.S. Environmental Protection Agency?s Comprehensive Environmental Response, Compensation, and Liability Act, 1980 process, a Remedial Investigation was completed in July 1991, a method of site remediation was issued in the Record of Decision dated June 1992, and a Final Design Report was completed in May 1997. In cooperation with the U.S. Environmental Protection Agency in the hydrogeologic assessment of the site remediation, the U.S. Geological Survey began a study in 1997 to determine the effects of the onsite and offsite extraction wells on ground-water flow and contaminant migration from the Gettysburg Elevator Plant. This determination is based on hydrologic and geophysical data collected from 1991 to 1998 and on results of numerical model simulations of the local ground-water flow-system. The Gettysburg Elevator Site is underlain by red, green, gray, and black shales of the Heidlersburg Member of the Gettysburg Formation. Correlation of natural-gamma logs indicates the sedimentary rock strike about N. 23 degrees E. and dip about 23 degrees NW. Depth to bedrock onsite commonly is about 6 feet but offsite may be as deep as 40 feet. The ground-water system consists of two zones?a thin, shallow zone composed of soil, clay, and highly weathered bedrock and a thicker, nonweathered or fractured bedrock zone. The shallow zone overlies the bedrock zone and truncates the dipping beds parallel to land surface. Diabase dikes are barriers to ground-water flow in the bedrock zone. The ground-water system is generally confined or semi-confined, even at shallow depths. Depth to water can range from flowing at land surface to more than 71 feet below land surface. Potentiometric maps based on measured water levels at the Gettysburg Elevator Plant indicate ground water flows from west to east, towards Rock Creek. Multiple-well aquifer tests indicate the system is heterogeneous and flow is primarily in dipping beds that contain discrete secondary openings separated by less permeable beds. Water levels in wells open to the pumped bed, as projected along the dipping stratigraphy, are drawn down more than water levels in wells not open to the pumped bed. Ground-water flow was simulated for steady-state conditions prior to pumping and long-term average pumping conditions. The three-dimensional numerical flow model (MODFLOW) was calibrated by use of a parameter estimation program (MODFLOWP). Steady-state conditions were assumed for the calibration period of 1996. An effective areal recharge rate of 7 inches was used in model calibration. The calibrated flow model was used to evaluate the effectiveness of the current onsite and offsite extraction well system. The simulation results generally indicate that the extraction system effectively captures much of the ground-water recharge at the Gettysburg Elevator Plant and, hence, contaminated ground-water migrating from the site. Some of the extraction wells pump at low rates and have very small contributing areas. Results indicate some areal recharge onsite will move to offsite extraction wells.

Pennsylvania↗
USGS2006

Distribution of recent volcanism and the morphology of seamounts and ridges in the GLIMPSE study area: Implications for the lithospheric cracking hypothesis for the origin of intraplate, non-hot spot volcanic chains

Lithospheric cracking by remotely applied stresses or thermoelastic stresses has been suggested to be the mechanism responsible for the formation of intraplate volcanic ridges in the Pacific that clearly do not form above fixed hot spots. As part of the Gravity Lineations Intraplate Melting Petrology and Seismic Expedition (GLIMPSE) project designed to investigate the origin of these features, we have mapped two volcanic chains that are actively forming to the west of the East Pacific Rise using multibeam echo sounding and side-scan sonar. Side-scan sonar reveals the distribution of rough seafloor corresponding to recent, unsedimented lava flows. In the Hotu Matua volcanic complex, recent flows and volcanic edifices are distributed over a region 450 km long and up to 65 km wide, with an apparent, irregular age progression from older flows in the west to younger in the east. The 550-km-long Southern Cross Seamount/Sojourn Ridge/Brown Ridge chain appears to have been recently active only at its eastern end near the East Pacific Rise. A third region of recent flows is found 120 km north of Southern Cross Seamount in seafloor approximately 9 Myr old. No indication of lithospheric extension in the form of faulting or graben formation paralleling the trend of the volcanic chains is found in the vicinity of recent flows or anywhere else in the study area. Thermoelastic cracking could be a factor in the formation of a few small, very narrow volcanic ridges, but most of the volcanic activity is broadly distributed in wide swaths with no indication of formation along narrow cracks. The Sojourn and Brown chains appear to begin as distributed zones of small seamounts that later develop into segmented ridges, perhaps under the influence of membrane stresses from self-loading. We suggest that the linear volcanic chains are created by moving melting anomalies in the asthenosphere and that lithospheric cracking plays at most a secondary role. Copyright 2006 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Use of advanced borehole geophysical techniques to delineate fractured-rock ground-water flow and fractures along water-tunnel facilities in northern Queens County, New York

Advanced borehole geophysical methods were used to assess the geohydrology of crystalline bedrock along the course of a new water tunnel for New York City. The logging methods include natural gamma, spontaneous potential, single-point resistance, mechanical and acoustic caliper, focused electromagnetic induction, electromagnetic resistivity, magnetic susceptibility, borehole-fluid temperature and conductance, differential temperature, heat-pulse flowmeter, acoustic televiewer, borehole deviation, optical televiewer, and borehole radar. Integrated interpretation of the geophysical logs from an 825-foot borehole (1) provided information on the extent, orientation, and structure (foliation and fractures) within the entire borehole, including intensely fractured intervals from which core recovery may be poor; (2) delineated transmissive fracture zones intersected by the borehole and provided estimates of their transmissivity and hydraulic head; and (3) enabled mapping of the location and orientation of structures at distances as much as 100 ft from the borehole. Analyses of the borehole-wall image and the geophysical logs from the borehole on Crescent Street, in northern Queens County, are presented here to illustrate the application of the methods. The borehole penetrates gneiss and other crystalline bedrock that has predominantly southeastward dipping foliation and nearly horizontal and southeastward-dipping fractures. The heat-pulse flowmeter logs obtained under pumping and nonpumping conditions, together with the other geophysical logs, indicate five transmissive fracture zones. More than 90 percent of the open-hole transmissivity is associated with a fracture zone 272 feet BLS (below land surface). A transmissive zone at 787 feet BLS that consists of nearly parallel fractures lies within the projected tunnel path; here the hydraulic head is 12 to 15 feet lower than that of transmissive zones above the 315-foot depth. The 60-megahertz directional borehole radar logs indicate the location and orientation of two closely spaced radar reflectors that would intersect the projection of the borehole below its drilled depth. Subsequent excavation of the tunnel past the borehole allowed comparison of the log analysis with conditions observed in the tunnel. The tunnel was found to intersect gneiss with southeastward dipping foliation; many nearly horizontal fractures; and a southeastward dipping fracture zone whose location, character, and orientation was consistent with that of the mapped radar reflectors. The fracture zone produced inflow to the tunnel at a rate of 50 to 100 gallons per minute. All conditions indicated by the logging methods were consistent with those observed within the tunnel.

New York↗
USGS2002

Hydrogeological investigation at Site 5, Willow Grove Naval Air Station/Joint Reserve Base, Horsham Township, Montgomery County, Pennsylvania

The U.S. Geological Survey conducted borehole geophysical logging, collected and analyzed water-level data, and sampled sections of a rock core to determine the concentration of volatile organic compounds in the aquifer matrix of the Stockton Formation. Borehole geophysical logs were run in three monitor wells. At well 05MW04I, the vertical gradient was upward at depths above 42 feet below land surface (ft bls), downward between 42 and 82 ft bls, and upward below 82 ft bls. At well 05MW05I, a downward vertical gradient was present. At well 05MW12I, the vertical gradient was downward above 112 ft bls and upward below 112 ft bls. Three water-bearing fractures in a 17-foot long rock core from 23.5 to 40.5 ft bls were identified and sampled. Three samples were analyzed from each water-bearing fracture—at the fracture face, 2 centimeters (cm) below the fracture, and 4 cm below the fracture. Fifteen compounds were detected; however, concentrations of seven compounds were less than 1 microgram per kilogram (mg/kg) when detected. Concentrations of benzene (from 0.39 to 3.3 mg/kg), 1,1-dichloroethene (1,1-DCE) (from 0.15 to 13 mg/kg), 1,1,1-trichloroethane (TCA) (from 0.17 to 22 mg/kg), and trichloroethylene (TCE) (from 0.092 to 9.6 mg/kg) were detected in all samples. The highest concentrations detected were for toluene, which was detected at a concentration of 32 and 86 mg/kg in the samples from unweathered sandstone at 2 and 4 cm below the fracture, respectively. Concentrations generally decreased with distance below the fracture in the mudstone samples. Concentrations of benzene and toluene increased with distance below the fractures in the unweathered sandstone samples. Concentrations of 1,1-DCE, TCA, and TCE were higher in the mudstone samples than in the samples from sandstone. Toluene concentrations were higher in unweathered sandstone than in weathered sandstone or mudstone. The effect of the pumping of Horsham Water and Sewer Authority public supply well 26 (HWSA-26), 0.2 mile southwest of the base boundary, on groundwater levels on the base was determined by shutting the well down for 6 days to allow water levels to recover. Water levels in 22 nearby wells were measured. The only well (02MW01I) that showed an unambiguous response to the shutdown of well HWSA-26 is 1,350 feet directly along strike from well HWSA-26. The recovery of well 05MW11I in response to the shutdown of well HWSA-26 is masked by recharge from snowmelt but probably does not exceed about 0.2 feet on the basis of the water level in well 05MW11I, which showed a response to the pumping of well HWSA-26 that ranged from 0.5 to 0.15 foot. Horizontal gradients differ with depth, and the rate and direction of ground-water flow and contaminant movement is depth dependent. The potentiometric-surface map for water levels measured in wells screened between 5 and 44 ft bls in the aquifer shows a ground-water mound that is the high point on a regional ground-water divide. From this divide, ground water flows both northwest toward Park Creek and southeast toward Pennypack Creek. The hydraulic gradient around this mound is relatively flat to the southeast and particularly flat to the northwest. The potentiometric-surface map for water levels measured in wells screened between 40 and 100 ft bls in the aquifer shows a very flat hydraulic gradient. Differences in the elevation of the potentiometric surface are less than 2 feet. The potentiometric-surface map for water levels measured in wells screened between 105 and 179 ft bls in the aquifer shows a steep hydraulic gradient between Sites 5 and 2 and a relatively flat hydraulic gradient between Sites 5 and 3. Water levels measured on October 7, 1999, showed downward vertical head gradients for all well clusters at Site 5. Vertical gradients ranged from 0.01 at well cluster 05MW10 to 0.2 at cluster 05MW11. Most gradients were between 0.01 and 0.026. Vertical head gradients vary with time. The variability is caused by a difference in the magnitude of water-level fluctuations between shallow and the deep fractures. The difference in the magnitude of water-level fluctuations is because of differences in lithology and aquifer storativity.

Pennsylvania↗
USGS2014

Latest Quaternary paleoseismology and evidence of distributed dextral shear along the Mohawk Valley fault zone, northern Walker Lane, California

The dextral-slip Mohawk Valley fault zone (MVFZ) strikes northwestward along the eastern margin of the Sierra Nevada in the northern Walker Lane. Geodetic block modeling indicates that the MVFZ may accommodate ~3 mm/yr of regional dextral strain, implying that it is the highest slip-rate strike-slip fault in the region; however, only limited geologic data are available to constrain the system’s slip rate and earthquake history. We mapped the MVFZ using airborne lidar data and field observations and identified a site near Sulphur Creek for paleoseismic investigation. At this site, oblique dextral-normal faulting on the steep valley margin has created a closed depression that floods annually during spring snowmelt to form an ephemeral pond. We excavated three fault-perpendicular trenches at the site and exposed pond sediment that interfingers with multiple colluvial packages eroded from the scarp that bounds the eastern side of the pond. We documented evidence for four surface-rupturing earthquakes on this strand of the MVFZ. OxCal modeling of radiocarbon and luminescence ages indicates that these earthquakes occurred at 14.0 ka, 12.8 ka, 5.7 ka, and 1.9 ka. The mean ~4 kyr recurrence interval is inconsistent with slip rates of ~3 mm/yr; these rates imply surface ruptures of more than 10 m per event, which is geologically implausible for the subdued geomorphic expression and 60 km length of the MVFZ. We propose that unidentified structures not yet incorporated into geodetic models may accommodate significant dextral shear across the northern Walker Lane, highlighting the role of distributed deformation in this region.

California↗
USGS2011

Field Reconnaissance Geologic Mapping of the Columbia Hills, Mars: Results from MER Spirit and MRO HiRISE Observations

Chemical, mineralogic, and lithologic ground truth was acquired for the first time on Mars in terrain units mapped using orbital Mars Reconnaissance Orbiter's High Resolution Imaging Science Experiment (MRO HiRISE) image data. Examination of several dozen outcrops shows that Mars is geologically complex at meter length scales, the record of its geologic history is well exposed, stratigraphic units may be identified and correlated across significant areas on the ground, and outcrops and geologic relationships between materials may be analyzed with techniques commonly employed in terrestrial field geology. Despite their burial during the course of Martian geologic time by widespread epiclastic materials, mobile fines, and fall deposits, the selective exhumation of deep and well-preserved geologic units has exposed undisturbed outcrops, stratigraphic sections, and structural information much as they are preserved and exposed on Earth. A rich geologic record awaits skilled future field investigators on Mars. The correlation of ground observations and orbital images enables construction of a corresponding geologic reconnaissance map. Most of the outcrops visited are interpreted to be pyroclastic, impactite, and epiclastic deposits overlying an unexposed substrate, probably related to a modified Gusev crater central peak. Fluids have altered chemistry and mineralogy of these protoliths in degrees that vary substantially within the same map unit. Examination of the rocks exposed above and below the major unconformity between the plains lavas and the Columbia Hills directly confirms the general conclusion from remote sensing in previous studies over past years that the early history of Mars was a time of more intense deposition and modification of the surface. Although the availability of fluids and the chemical and mineral activity declined from this early period, significant later volcanism and fluid convection enabled additional, if localized, chemical activity.

Journal of Geophysical Research E: Planets↗
USGS2024

Geologic map of Scoggins Dam, Henry Hagg Lake, and Scoggins Valley, Washington County, Oregon

New geologic mapping (Wells and others, 2020b) and geophysical mapping (Blakely and others, 2000; McPhee and others, 2014; Wells and others, 2020a) document kilometers of Cenozoic right-lateral offset along the Gales Creek Fault Zone, a major, northwest-striking fault zone forming the boundary between the Tualatin Valley and the Coast Range. The Bureau of Reclamation’s (Reclamation) Scoggins Dam (fig. 1), in the Coast Range foothills west of Forest Grove, Oregon, lies within the Gales Creek Fault Zone as mapped by Wells and others (2020a, 2020b; fig. 2). Active faults of the Gales Creek Fault Zone defined by paleoseismic trenching (Redwine and others, 2017, 2019b, Horst and others, 2018, 2019, 2021, and Wells and others, 2020a) are presently mapped as projecting through the existing dam. The Pacific Northwest Region of Reclamation requested assistance with geologic studies around Scoggins Dam to provide better understanding of fault locations and their activity, which are needed to design a modification of the dam (Maguire, 2019a, b). The scope of this project includes detailed geology of the existing Scoggins Dam site, Henry Hagg Lake, the reservoir behind the dam, and Scoggins Valley downstream of the existing dam, particularly around a potential new dam site, where Scoggins Creek cuts through a narrow gap formed by a resistant felsic tuff bed that crosses the valley.

Oregon↗
USGS2012

Airborne electromagnetic mapping of the base of aquifer in areas of western Nebraska

Airborne geophysical surveys of selected areas of the North and South Platte River valleys of Nebraska, including Lodgepole Creek valley, collected data to map aquifers and bedrock topography and thus improve the understanding of groundwater - surface-water relationships to be used in water-management decisions. Frequency-domain helicopter electromagnetic surveys, using a unique survey flight-line design, collected resistivity data that can be related to lithologic information for refinement of groundwater model inputs. To make the geophysical data useful to multidimensional groundwater models, numerical inversion converted measured data into a depth-dependent subsurface resistivity model. The inverted resistivity model, along with sensitivity analyses and test-hole information, is used to identify hydrogeologic features such as bedrock highs and paleochannels, to improve estimates of groundwater storage. The two- and three-dimensional interpretations provide the groundwater modeler with a high-resolution hydrogeologic framework and a quantitative estimate of framework uncertainty. The new hydrogeologic frameworks improve understanding of the flow-path orientation by refining the location of paleochannels and associated base of aquifer highs. These interpretations provide resource managers high-resolution hydrogeologic frameworks and quantitative estimates of framework uncertainty. The improved base of aquifer configuration represents the hydrogeology at a level of detail not achievable with previously available data.

Nebraska↗