SEARCH · Search USGS

Results for “Journal of Geophysical Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73Linked to original sources

USGS1996

Observed discrepancy between geodolite and GPS distance measurements

Comparison of contemporaneous measurements of 84 distances in the range of 10 to 50 km by both Global Positioning System (GPS) and Geodolite (an electro-optical distance-measuring instrument) indicates that the Geodolite measurements are systematically longer by 0.283 ± 0.100 parts per million of the measured distance. Quoted uncertainty is 1 standard deviation. This amounts to 11.3 ± 4.0 mm at 40 km, which is near the maximum Geodolite range. The systematic difference is within the random uncertainty of an individual GPS-Geodolite comparison and was detected only from an analysis of a large number (84) of such comparisons. The source of the systematic difference has not been identified.

Journal of Geophysical Research B: Solid Earth↗

USGS1996

Compressive and tensile failure at high fluid pressure where preexisting fractures have cohesive strength, with application to the San Andreas fault

In thrusting and strike-slip situations, when the maximum principal horizontal stress S 1 acts nearly normal to a fault (a misoriented fault, such as the San Andreas), pore-fluid pressure > the lithostatic load, P f > S v , is required to reactivate movement on that fault. P f > S v may be achieved without causing hydraulic tensile fracturing if (1) previously existing cracks have regained cohesive strength by chemical processes, (2) subcritical crack growth has been blunted, and (3) the least principal horizontal stress S 3 nearly equals S v . Where P f > S v has been attained within a misaligned fault, increasing the stress difference ( S 1 – S 3 ) at constant P f > S v will not lead to shear failure, while a decrease in ( S 1 – S 3 ) can lead to shear failure of that fault. However, where the cohesive strength of material in a broad misaligned fault zone is less than that of the surrounding intact rock, increasing ( S 1 – S 3 ) while P f > S v can result in shear failure of fractures at near optimum angles to S 1 , but confined within this weak fault zone. If this faulting results in the local short-lived attainment of P f > S v (cataclastic deformation and frictional heating overcoming dilation) and a simultaneous decrease in ( S 1 – S 3 ), this combination of effects can trigger movement along the main trace of the misaligned fault. When increasing P f results in hydraulic failure, anisotropy in tensile strength or fracture toughness resulting from foliation within faults allows fractures to propagate along the planes of weakness rather than across the foliation perpendicular to S 3 .

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Stratigraphic and structural implications of conodont and detrital zircon U-Pb ages from metamorphic rocks of the Coldfoot terrane, Brooks Range, Alaska

New paleontologic and isotopic data from the Emma Creek and Marion Creek schists of the Coldfoot terrane, Arctic Alaska superterrane, central Brooks Range, suggest Devonian and possibly younger ages of deposition for their sedimentary protoliths. Conodonts from marble of the Emma Creek schist, intruded by a roughly 392 Ma orthogneiss, are late Lochkovian (early Early Devonian, between about 408 and 396 Ma) and Silurian to Devonian at two other locations. Spherical to oblong detrital zircons from quartz-mica schist of the overlying Marion Creek schist yield mostly discordant U—Pb data suggestive of provenance ages of 3.0, 2.0–1.8, and 1.5–1.4 Ga; however, several euhedral grains of zircon from Marion Creek quartz-mica schist have concordant U—Pb ages from 370 to 360 Ma. The Marion Creek schist in our study area therefore is at least 26 m.y. younger than the Emma Creek schist. The age data imply that the protolith of the Emma Creek schist is age correlative with Devonian carbonate rocks in the Hammond and North Slope terranes, whereas the Marion Creek schist is age correlative with Upper Devonian and Lower Mississippian clastic sedimentary rocks of the Endicott Group in the Endicott Mountains terrane and shale and carbonate units in the De Long Mountains and Sheenjek River terranes. Consequently, tectonic models restoring the entire Coldfoot terrane beneath partly or wholly coeval rocks of the Hammond, Endicott Mountains, De Long Mountains, and Sheenjek River terranes of the Arctic Alaska superterrane require revision. Alternative reconstructions, including restoration of the Coldfoot terrane inboard of the Endicott Mountains terrane or outboard of the De Long Mountains and Sheenjek River terranes are plausible but require either larger amounts of shortening than previously suggested or indicate problematic facies relations.

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Correlated errors in geodetic time series: Implications for time-dependent deformation

Analysis of frequent trilateration observations from the two-color electronic distance measuring networks in California demonstrate that the noise power spectra are dominated by white noise at higher frequencies and power law behavior at lower frequencies. In contrast, Earth scientists typically have assumed that only white noise is present in a geodetic time series, since a combination of infrequent measurements and low precision usually preclude identifying the time-correlated signature in such data. After removing a linear trend from the two-color data, it becomes evident that there are primarily two recognizable types of time-correlated noise present in the residuals. The first type is a seasonal variation in displacement which is probably a result of measuring to shallow surface monuments installed in clayey soil which responds to seasonally occurring rainfall; this noise is significant only for a small fraction of the sites analyzed. The second type of correlated noise becomes evident only after spectral analysis of line length changes and shows a functional relation at long periods between power and frequency of 1/ƒ α , where ƒ is frequency and α≈2. With α=2, this type of correlated noise is termed random-walk noise, and its source is mainly thought to be small random motions of geodetic monuments with respect to the Earth's crust, though other sources are possible. Because the line length changes in the two-color networks are measured at irregular intervals, power spectral techniques cannot reliably estimate the level of 1/ƒ α noise. Rather, we also use here a maximum likelihood estimation technique which assumes that there are only two sources of noise in the residual time series (white noise and random-walk noise) and estimates the amount of each. From this analysis we find that the random-walk noise level averages about 1.3 mm/√yr and that our estimates of the white noise component confirm theoretical limitations of the measurement technique. In addition, the seasonal noise can be as large as 3 mm in amplitude but typically is less than 0.5 mm. Because of the presence of random-walk noise in these time series, modeling and interpretation of the geodetic data must account for this source of error. By way of example we show that estimating the time-varying strain tensor (a form of spatial averaging) from geodetic data having both random-walk and white noise error components results in seemingly significant variations in the rate of strain accumulation; spatial averaging does reduce the size of both noise components but not their relative influence on the resulting strain accumulation model.

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Permeability and porosity of the Illinois UPH 3 drillhole granite and a comparison with other deep drillhole rocks

Permeability, porosity, and volumetric strain measurements were conducted on granite cores obtained at depths of 0.7 to 1.6 km from the Illinois UPH 3 drillhole at effective confining pressures from 5 to 100 MPa. Initial permeabilities were in the range of 10-17 to 10-19 m2 and dropped rapidly with applied pressure to values between 10-20 and 10-24 m2 at 100 MPa, typical of other deep granite core samples. These values are several decades lower than equivalent weathered surface granites at comparable effective confining pressures, where weathering products in cracks and pores inhibit crack closure with applied pressure. Permeabilities of the Illinois cores were inversely related to sample depth, suggesting that stress relief and thermal microfractures induced during core retrieval dominated the fluid flow. Thus these samples provide an upper bound on in situ matrix permeability values. A comparison of core permeability from UPH 3 and other deep drillholes shows that stress relief damage can often dominate laboratory permeability measurements. We conclude that it may be difficult to make meaningful estimates of in situ permeability based on either borehole samples (possible damage during retrieval) or surface-derived analogs (altered by weathering). Volumetric strain determined from porosity measurements was compared with differential strain analysis (DSA) data reported by other investigators on samples from the same depths in the drillhole. Our strain measurements (0.002 to 0.005 at 100 MPa) were nearly twice as large as the DSA values, probably because of the crack-enhancing effects of fluids present in our samples that are absent in the dry DSA cores, as well as other time-dependent deformation effects. This difference in observed strain magnitudes between the two measurement methods may be an important consideration if strain and/or porosity data from deep core samples are used in models of stress, fluid circulation, and excess fluid pressure generation in the midcrust.

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Three-dimensional upper crustal velocity structure beneath San Francisco Peninsula, California

This paper presents new seismic data from, and crustal models of the San Francisco Peninsula. In much of central California the San Andreas fault juxtaposes the Cretaceous granitic Salinian terrane on its west and the Late Mesozoic/Early Tertiary Franciscan Complex on its east. On San Francisco Peninsula, however, the present-day San Andreas fault is completely within a Franciscan terrane, and the Pilarcitos fault, located southwest of the San Andreas, marks the Salinian-Franciscan boundary. This circumstance has evoked two different explanations: either the Pilarcitos is a thrust fault that has pushed Franciscan rocks over Salinian rocks or the Pilarcitos is a transform fault that has accommodated significant right-lateral slip. In an effort to better resolve the subsurface structure of the peninsula faults, we established a temporary network of 31 seismographs arrayed across the San Andreas fault and the subparallel Pilarcitos fault at ∼1–2 km spacings. These instruments were deployed during the first 6 months of 1995 and recorded local earthquakes, air gun sources set off in San Francisco Bay, and explosive sources. Travel times from these sources were used to augment earthquake arrival times recorded by the Northern California Seismic Network and were inverted for three-dimensional velocity structure. Results show lateral velocity changes at depth (∼0.5–7 km) that correlate with downward vertical projections of the surface traces of the San Andreas and Pilarcitos faults. We thus interpret the faults as high-angle to vertical features (constrained to a 70°–110° dip range). From this we conclude that the Pilarcitos fault is probably an important strike-slip fault that accommodated much of the right-lateral plate boundary strain on the peninsula prior to the initiation of the modern-day San Andreas fault in this region sometime after about 3.0 m.y. ago.

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Resolution of fault slip along the 470-km-long rupture of the great 1906 San Francisco earthquake and its implications

Data from all available triangulation networks affected by the 1906 earthquake have been combined to assess the trade-off between slip resolution and its uncertainty and to construct a conservative image of coseismic slip along the rupture. Because of varying network aperture and station density, slip resolution is very uneven. Although slip is determined within uncertainties of ??1.0 m along 60% of the fault, constraints are poor on the remaining, mostly offshore portions of the rupture. Slip decreases from maxima of 8.6 and 7.5 m at Shelter Cove and Tomales Bay to 4.5 m near Mount Tamalpais and 2.7 m at Loma Prieta. The geodetically derived slip distribution is in poor agreement with estimates based on analysis of S wave seismograms, probably because these waves register only 20-30% of the total seismic moment obtained from longer-period surface waves. Consideration of a range of fault geometries for 1906 slip near Loma Prieta indicates right-lateral motions lie between 2.3 and 3.1 m. These values are considerably greater than the 1.5 m of measured surface slip on which several assessments of high earthquake hazard for this fault segment were based. This factor, along with the absence of 1989 slippage where 1906 surface slip was used to make the forecasts, casts doubt on some claims of success in predicting the 1989 M = 6.9 Loma Prieta earthquake.

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Empirical Green's function analysis: Taking the next step

An extension of the empirical Green's function (EGF) method is presented that involves determination of source parameters using standard EGF deconvolution, followed by inversion for a common attenuation parameter for a set of colocated events. Recordings of three or more colocated events can thus be used to constrain a single path attenuation estimate. I apply this method to recordings from the 1995–1996 Ridgecrest, California, earthquake sequence; I analyze four clusters consisting of 13 total events with magnitudes between 2.6 and 4.9. I first obtain corner frequencies, which are used to infer Brune stress drop estimates. I obtain stress drop values of 0.3–53 MPa (with all but one between 0.3 and 11 MPa), with no resolved increase of stress drop with moment. With the corner frequencies constrained, the inferred attenuation parameters are very consistent; they imply an average shear wave quality factor of approximately 20–25 for alluvial sediments within the Indian Wells Valley. Although the resultant spectral fitting (using corner frequency and κ) is good, the residuals are consistent among the clusters analyzed. Their spectral shape is similar to the the theoretical one-dimensional response of a layered low-velocity structure in the valley (an absolute site response cannot be determined by this method, because of an ambiguity between absolute response and source spectral amplitudes). I show that even this subtle site response can significantly bias estimates of corner frequency and κ, if it is ignored in an inversion for only source and path effects. The multiple-EGF method presented in this paper is analogous to a joint inversion for source, path, and site effects; the use of colocated sets of earthquakes appears to offer significant advantages in improving resolution of all three estimates, especially if data are from a single site or sites with similar site response.

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Geodetic measurements of horizontal strain near the White Wolf fault, Kern County, California, 1926-1993

The White Wolf fault, located north of the Big Bend segment of the San Andreas fault, is the NE‐SW trending, left lateral‐oblique reverse fault responsible for the M s =7.8 1952 Kern County earthquake. We combined Global Positioning System (GPS) measurements with historical triangulation and trilateration data to determine changes in the strain rate over 7 decades (1926–1993). We reanalyzed the historical geodetic data and calculated an elevated preseismic (1926–1952) maximum shear strain rate of 0.62±0.16 μstrain/yr across the White Wolf fault. The maximum shear strain rate decreased with distance toward the Garlock fault to 0.09±0.08 μstrain/yr. In the decade following the earthquake (1952–1963), the near fault was high (0.85±0.23μstrain/yr), and decreased to 0.23±0.13 μstrain/yr across the Garlock fault. In 1993, we resurveyed many of the same monuments with GPS receivers to estimate fault‐crossing and off‐fault strain rates for the preceding 30 years. Across the White Wolf fault, the maximum shear strain rate dropped to 0.19±0.07 μstrain/yr. The azimuths of the maximum principal strain rates (ϕ) for the 1963–1993 epoch rotate from a fault normal orientation (−57°±15°) across the White Wolf fault to 11°±3°E across the Garlock fault.

California↗

USGS1997

An integrated model for the tectonic development of the frontal Brooks Range and Colville Basin 250 km west of the Trans-Alaska Crustal Transect

We present a kinematic model for the sequence of deformation and sedimentation in the frontal Brooks Range and adjacent Colville Basin in the Etivluk River region, 250 km west of the Trans-Alaska Crustal Transect (TACT). The model is based on a tectonic subsidence analysis of the foreland basin, combined with structural, stratigraphic, and thermal studies of the northern edge of the Brooks Range thrust belt. We interpret six discrete tectonic events that led to the present-day configuration of the thrust belt in this area: (1) emplacement of ophiolitic allochthons over the distal continental margin rocks in Valanginian time, hundreds of kilometers south of this study, (2) Hauterivian uplift of the Barrow Arch rift margin, affecting the northern part of the Colville Basin, (3) Barremian contraction involving emplacement of distal continental margin and ophiolitic allochthons onto the Endicott Mountains allochthon and creation of a southward dipping flexural basin on the North Slope autochthon, (4) mid-Cretaceous exhumation of imbricated rocks in the Brooks Range during northward propagation of the thrust front into the foreland, (5) minor thrusting in Late Cretaceous-Paleocene in the northern foreland to the northern limit of contractional structures, and (6) regional exhumation of the orogen and the foreland in Paleocene-Eocene time. This sequence of deformation agrees well with a simple model of a forward propagating thrust system.

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Tectonic evolution of the central Brooks Range mountain front: Evidence from the Atigun Gorge region

Atigun Gorge, at the northern front of the eastern Endicott Mountains, contains well-exposed rocks of the upper part of the Endicott Mountains allochthon and rocks of the structurally higher Picnic Creek or Ipnavik River allochthon. These allochthons contain rocks as young as Early Cretaceous (Valanginian) and are separated by a nearly vertical fault zone that contains exotic blocks of Triassic and Jurassic chert and silicified mudstone. Siliceous rocks of this type are not present in the Endicott Mountains allochthon but are characteristic of the Picnic Creek, Ipnavik River, and some of the other allochthons that structurally overlie the Endicott Mountains allochthon in the central and western Brooks Range. These exotic blocks, therefore indicate that structurally higher rocks of either the Picnic Creek or Ipnavik River allochthon were emplaced during the Early Cretaceous and are preserved along the northern flank of the eastern Endicott Mountains. The deformed thickness of this higher allochthon in the subsurface north of the mountains is unknown but probably exceeds 2 kilometers. Similar relations are mapped east of Atigun Gorge in an area of structural transition from the eastern Endicott Mountains into the northern Philip Smith Mountains, which are formed by the parautochthonous North Slope stratigraphic assemblage. The allochthonous rocks at the mountain front are regionally unconformably overlain by proximal Lower Cretaceous (Albian) foredeep conglomerate at the southern flank of the Colville basin, but at Atigun Gorge, the base of these deposits is interpreted as a possible back thrust at a triangle zone. Conglomerate clasts in the foredeep deposits are dominantly chert, mafic igneous rock, and other lithologies characteristic of the Picnic Creek and Ipnavik River allochthons and scattered clasts from the Endicott Mountains allochthon. The conglomerates show that the chert-rich allochthonous rocks and the Endicott Mountains allochthon were emplaced in the north-central Brooks Range by large-scale crustal shortening (>300 km) between the Valanginian and Albian (∼135 to ∼112 Ma). This orogenic event significantly postdates early stages of Brooks Range orogeny but predates later stages of orogeny documented by stratigraphic and apatite fission-track data. These relations reduce the magnitude of shortening inferred at the triangle zone at the Brooks Range mountain front. The outcrop data suggest that some of the strata preserved at a structurally low level north of the mountain front and visible in the seismic data of the Trans-Alaska Crustal Transect (TACT) may consist of clastic sedimentary rocks of the structurally higher Picnic Creek or Ipnavik River allochthon.

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Crustal implications of bedrock geology along the Trans-Alaska Crustal Transect (TACT) in the Brooks Range, northern Alaska

Geologic mapping of the Trans-Alaska Crustal Transect (TACT) project along the Dalton Highway in northern Alaska indicates that the Endicott Mountains allochthon and the Hammond terrane compose a combined allochthon that was thrust northward at least 90 km in the Early Cretaceous. The basal thrust of the combined allochthon climbs up section in the hanging wall from a ductile shear zone in the south through lower Paleozoic rocks of the Hammond terrane and into Upper Devonian rocks of the Endicott Mountains allochthon at the Mount Doonerak antiform, culminating in Early Cretaceous shale in the northern foothills of the Brooks Range. Footwall rocks north of the Mount Doonerak antiform are everywhere parautochthonous Permian and Triassic shale of the North Slope terrane rather than Jurassic and Lower Cretaceous strata of the Colville Basin as shown in most other tectonic models of the central Brooks Range. Stratigraphic and structural relations suggest that this thrust was the basal detachment for Early Cretaceous deformation. Younger structures, such as the Tertiary Mount Doonerak antiform, deform the Early Cretaceous structures and are cored by thrusts that root at a depth of about 10 to 30 km along a deeper detachment than the Early Cretaceous detachment. The Brooks Range, therefore, exposes (1) an Early Cretaceous thin-skinned deformational belt developed during arc-continent collision and (2) a mainly Tertiary thick-skinned orogen that is probabty the northward continuation of the Rocky Mountains orogenic belt. A down-to-the-south zone of both ductile and brittle normal faulting along the southern margin of the Brooks Range probably formed in the mid-Cretaceous by extensional exhumation of the Early Cretaceous contractional deformation.

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Composition of the crust in the Grenville and Appalachian Provinces of North America inferred from VP/VS ratios

We use the ratios between P and S wave velocities (V P /V S ), derived from seismic refraction data, to infer the composition of the crust in the Grenville and the Appalachian Provinces of North America. The crust exhibits V P /V S increasing with depth from 1.64 to 1.84; there is a clear distinction between the Grenville Province (average V P /V S =1.81) and the Appalachian Province (average V P /V S =1.73) which persists at all depths. The boundary between these provinces is east dipping extending for 100 km east of the Champlain thrust. In the Appalachian Province the increase in V P /V S ratios with depth from 1.67 to 1.74±0.02 may reflect a normal decrease of silica content in the continental crust. In the Grenville Province beneath the Central Granulite Terrane, an anomalous V P /V S ratio of 1.82±0.02 is observed extending to a depth of 10 km; this correlates with the abundance of Ca‐plagioclase in the Marcy Anorthosite. At greater depth (15–20 km), where seismic lamination and high electrical conductivity is observed, V P /V S is 1.84±0.02 and correlates with the Tahawus Complex, a layered mafic intrusion. Within the 25‐km‐thick lower crust of the Grenville Province the V P /V S is 1.84±0.02 and P‐velocity is 7.0±0.1 km/s, which are typical for plagioclase‐bearing rocks (gabbro‐norite). The high V P /V S ratio in the Grenville Province has not been reported in crust of any other age. Since the Grenville Province contains 75% of the world's known anorthosites, high V P /V S ratio is related to high plagioclase. We suggest that the composition of the Grenville lower crust was significantly modified by the emplacement of the anorthosites in the mid‐Proterozoic.

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Continuous monitoring of surface deformation at Long Valley Caldera, California, with GPS

Continuous Global Positioning System (GPS) measurements at Long Valley Caldera, an active volcanic region in east central California, have been made on the south side of the resurgent dome since early 1993. A site on the north side of the dome was added in late 1994. Special adaptations for autonomous operation in remote regions and enhanced vertical precision were made. The data record ongoing volcanic deformation consistent with uplift and expansion of the surface above a shallow magma chamber. Measurement precisions (1 standard error) for “absolute” position coordinates, i.e., relative to a global reference frame, are 3–4 mm (north), 5–6 mm (east), and 10–12 mm (vertical) using 24 hour solutions. Corresponding velocity uncertainties for a 12 month period are about 2 mm/yr in the horizontal components and 3–4 mm/yr in the vertical component. High precision can also be achieved for relative position coordinates on short (less than 10 km) baselines using broadcast ephemerides and observing times as short as 3 hours, even when data are processed rapidly on site. Comparison of baseline length changes across the resurgent dome between the two GPS sites and corresponding two-color electronic distance measurements indicates similar extension rates within error (∼2 mm/yr) once we account for a random walk noise component in both systems that may reflect spurious monument motion. Both data sets suggest a pause in deformation for a 3.5 month period in mid-1995, when the extension rate across the dome decreased essentially to zero. Three dimensional positioning data from the two GPS stations suggest a depth (5.8±1.6 km) and location (west side of the resurgent dome) of a major inflation center, in agreement with other geodetic techniques, near the top of a magma chamber inferred from seismic data. GPS systems similar to those installed at Long Valley can provide a practical method for near real-time monitoring and hazard assessment on many active volcanoes.

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Färoe-Iceland Ridge Experiment: 1. Crustal structure of northeastern Iceland

Results from the Färoe-Iceland Ridge Experiment (FIRE) constrain the crustal thickness as 19 km under the Northern Volcanic Zone of Iceland and 35 km under older Tertiary areas of northeastern Iceland. The Moho is defined by strong P wave and S wave reflections. Synthetic seismogram modeling of the Moho reflection indicates mantle velocities of at least 8.0 km/s beneath the Tertiary areas of northeastern Iceland and at least 7.9 km/s beneath the neovolcanic zone. Crustal diving rays resolve the structure of the upper and lower crust. Surface P wave velocities are 1.1–4.0 km/s in Quaternary rocks and are rather higher, 4.4–4.7 km/s, in the Tertiary basalts that outcrop elsewhere. The highest crustal P wave velocities observed directly from diving rays are 7.1 km/s, from rays that turn at 24 km depth. Velocities of 7.35 km/s at the base of the crust are inferred from extrapolation of the lower crustal velocity gradient (0.024 s −1 ). A Poisson's ratio of approximately 0.27, equivalent to an S wave to P wave travel time ratio of 1.78, is measured throughout the crust east of the neovolcanic zone. The Poisson's ratio and the steep Moho topography (in places up to 30° from the horizontal) indicate that the entire crust outside the neovolcanic zone is cool (<800°C). Gravity data are well matched by a velocity/density conversion of our seismic crustal model and indicate a region of low mantle density beneath the neovolcanic zone, believed to be due to elevated mantle temperatures. The crustal thickness in the neovolcanic zone is consistent with geochemical estimates of the melt generation, placing constraints on the flow within the Iceland mantle plume.

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Multispectral thermal infrared mapping of sulfur dioxide plumes: A case study from the East Rift Zone of Kilauea Volcano, Hawaii

The synoptic perspective and rapid mode of data acquisition provided by remote sensing are well suited for the study of volcanic SO 2 plumes. In this paper we describe a plume-mapping procedure that is based on image data acquired with NASA's airborne thermal infrared multispectral scanner (TIMS) and apply the procedure to TIMS data collected over the East Rift Zone of Kilauea Volcano, Hawaii, on September 30, 1988. These image data covered the Pu‘u ‘O ‘o and Kupaianaha vents and a skylight in the lava tube that was draining the Kupaianaha lava pond. Our estimate of the SO 2 emission rate from Pu‘u ‘O ‘o (17–20 kg s −1 ) is roughly twice the average of estimates derived from correlation spectrometer (COSPEC) measurements collected 10 days prior to the TIMS overflight (10 kg s −1 ). The agreement between the TIMS and COSPEC results improves when we compare SO 2 burden estimates, which are relatively independent of wind speed. We demonstrate the feasibility of mapping Pu‘u ‘O ‘o - scale SO 2 plumes from space in anticipation of the 1998 launch of the advanced spaceborne thermal emission and reflectance radiometer (ASTER).

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Deep seismic structure and tectonics of northern Alaska: Crustal-scale duplexing with deformation extending into the upper mantle

Seismic reflection and refraction and laboratory velocity data collected along a transect of northern Alaska (including the east edge of the Koyukuk basin, the Brooks Range, and the North Slope) yield a composite picture of the crustal and upper mantle structure of this Mesozoic and Cenozoic compressional orogen. The following observations are made: (1) Northern Alaska is underlain by nested tectonic wedges, most with northward vergence (i.e., with their tips pointed north). (2) High reflectivity throughout the crust above a basal decollement, which deepens southward from about 10 km depth beneath the northern front of the Brooks Range to about 30 km depth beneath the southern Brooks Range, is interpreted as structural complexity due to the presence of these tectonic wedges, or duplexes. (3) Low reflectivity throughout the crust below the decollement is interpreted as minimal deformation, which appears to involve chiefly bending of a relatively rigid plate consisting of the parautochthonous North Slope crust and a 10- to 15-km-thick section of mantle material. (4) This plate is interpreted as a southward verging tectonic wedge, with its tip in the lower crust or at the Moho beneath the southern Brooks Range. In this interpretation the middle and upper crust, or all of the crust, is detached in the southern Brooks Range by the tectonic wedge, or indentor: as a result, crust is uplifted and deformed above the wedge, and mantle is depressed and underthrust beneath this wedge. (5) Underthrusting has juxtaposed mantle of two different origins (and seismic velocities), giving rise to a prominent sub-Moho reflector.

Journal of Geophysical Research B: Solid Earth↗

USGS1996

Factors affecting suspended-solids concentrations in South San Francisco Bay, California

Measurements of suspended-solids concentration (SSC) were made at two depths at three sites in South San Francisco Bay (South Bay) to determine the factors that affect SSC. Twenty-eight segments of reliable and continuous SSC time series data longer than 14 days were collected from late 1991 or 1992 through September 1993. Spectral analysis and singular spectrum analysis were used to relate these data segments to time series of several potential forcing factors, including diurnal and semidiurnal tides, the spring-neap tidal cycle, wind shear, freshwater runoff, and longitudinal density differences. SSC is greatest during summer, when a landward wind shear is applied to South Bay by the afternoon sea breeze. About one half the variance of SSC is caused by the spring-neap cycle, and SSC lags the spring-neap cycle by about 2 days. Relatively short duration of slack water limits the duration of deposition of suspended solids and consolidation of newly deposited bed sediment during the tidal cycle, so suspended solids accumulate in the water column as a spring tide is approached and slowly deposit as a neap tide is approached. Perturbations in SSC caused by wind and local runoff from winter storms during the study period were usually much smaller than SSC variations caused by the spring-neap cycle. Variations of SSC at the study sites at tidal timescales are tidally forced, and nonlinear physical processes are significant. Advective transport dominates during spring tides, when water with higher SSC due to wind wave resuspension is advected to the main channel from shallow water, but, during neap tides, advective transport is less significant. The findings of this and other studies indicate that the tidally averaged transport of suspended solids responds to seasonal variations of wind shear in South Bay.

Journal of Geophysical Research C: Oceans↗