Search USGS⌕ Search

SEARCH · Search USGS

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72Linked to original sources
USGS1979

Surface faults in the gulf coastal plain between Victoria and Beaumont, Texas

Displacement of the land surface by faulting is widespread in the Houston-Galveston region, an area which has undergone moderate to severe land subsidence associated with fluid withdrawal (principally water, and to a lesser extent, oil and gas). A causative link between subsidence and fluid extraction has been convincingly reported in the published literature. However, the degree to which fluid withdrawal affects fault movement in the Texas Gulf Coast, and the mechanism(s) by which this occurs are as yet unclear. Faults that offset the ground surface are not confined to the large (>6000-km 2 ) subsidence “bowl” centered on Houston, but rather are common and characteristic features of Gulf Coast geology. Current observations and conclusions concerning surface faults mapped in a 35,000-km 2 area between Victoria and Beaumont, Texas (which area includes the Houston subsidence bowl) may be summarized as follows: (1) Hundreds of faults cutting the Pleistocene and Holocene sediments exposed in the coastal plain have been mapped. Many faults lie well outside the Houston-Galveston region; of these, more than 10% are active, as shown by such features as displaced, fractured, and patched road surfaces, structural failure of buildings astride faults, and deformed railroad tracks. (2) Complex patterns of surface faults are common above salt domes. Both radial patterns (for example, in High Island, Blue Ridge, Clam Lake, and Clinton domes) and crestal grabens (for example, in the South Houston and Friendswood-Webster domes) have been recognized. Elongate grabens connecting several known and suspected salt domes, such as the fault zone connecting Mykawa, Friendswood-Webster, and Clear Lake domes, suggest fault development above rising salt ridges. (3) Surface faults associated with salt domes tend to be short (<5 km in length), numerous, curved in map view, and of diverse trend. Intersecting faults are common. In contrast, surface faults in areas unaffected by salt diapirism are frequently mappable for appreciable distances (>10 km), occur singly or in simple grabens, have gently sinuous traces, and tend to lie roughly parallel to the ENE-NE “coastwise” trend common to regional growth faults identified in subsurface Tertiary sediments. (4) Evidence to support the thesis that surface scarps are the shallow expression of faults extending downward into the Tertiary section is mostly indirect, but nonetheless reasonably convincing. Certainly the patterns of crestal grabens and radiating faults mapped on the surface above salt domes are more than happenstance; analogous fault patterns have been documented around these structures at depth. Similarly, some of the long surface faults not associated with salt domes seem to have subsurface counterparts among known regional growth faults documented through well logs and seismic data. Correlations between surface scarps and faults offsetting subsurface data are not conclusive because of the large vertical distances (1900- 3800 m) involved in making the most of the inferred connections. Nevertheless, the large number of successful correlations - in trend, movement sense, and position - suggests that many surface scarps represent merely the most recent displacements on faults formed during the Tertiary. (5) Upstream-facing fault scarps in this region of low relief can be significant impediments to streams. Locally, both abandoned, mud-filled Pleistocene distributary channels and, more commonly, Holocene drainage lines still occupied by perennial streams reflect the influence of faulting on their development. Some bend sharply near faults and have tended to flow along or pond against the base of scarps; others meander within topographically expressed grabens. Such evidence for Quaternary displacement of the ground surface is widespread in the Texas Gulf coast. In the general, however, streams in areas now offset by faulting show no disruption of their courses where they cross fault scarps. Such scarps are probably very young, and where they can be demonstrated to partly or wholly predate fluid withdrawal, very recent natural fault activity is indicated. (6) Early aerial photographs (1930) of the entire region and topographic maps (1915-16 surveys) of Harris County (Houston and vicinity) show that many faults had already displaced the land surface at a time when appreciable pressure declines in subjacent strata were localized to relatively few areas of large-scale pumping. Prehistoric faulting of the land surface, as noted above, appears to have affected much of the Texas Gulf Coast. (7) A relation between groundwater extraction and current motion on active faults is suspected because of the increased incidence of ground failure in the Houston-Galveston subsidence bowl. This argument is weakened somewhat by recognition of numerous surface faults, some of them active today, far beyond the periphery of the strongly subsiding area. Moreover, tilt beam records from two monitored faults in northwest Houston and accounts of fault damage from local residents demonstrate a complex, episodic nature of fault creep which can only partially be correlated with groundwater production. Nevertheless, although specific mechanisms are in doubt, the extraction of groundwater from shallow (<800-m) sands is probably a major factor in contributing to current displacement of the ground surface in the Houston-Galveston region. Within this large area, the number of faults recognizable from aerial photographs has increased at least tenfold between 1930 and 1970. Elsewhere in the Texas Gulf Coast only a moderate increase has been noted, some of which is possibly attributable to oil and gas production. Surface fault density in the Houston-Galveston region is far greater than in any other area of the Texas Gulf Coast investigated to date. A plausible explanation for these differences is that large overdrafts of groundwater over an extended period of time in the Houston-Galveston region have stimulated fault activity there. Throughout the Texas Gulf Coast, however, a natural contribution to fault motion remains a distinct possibility.

Texas↗
USGS1979

Anomalously high uplift rates along the Ventura-Santa Barbara coast, California-tectonic implications

The NW—SE trending segments of the California coastline from Point Arena to Point Conception (500 km) and from Los Angeles to San Diego (200 km) generally parallel major right-lateral strike-slip fault systems. Minor vertical crustal movements associated with the dominant horizontal displacements along these fault systems are recorded in local sedimentary basins and slightly deformed marine terraces. Typical maximum uplift rates during Late Quaternary time are about 0.3 m/ka, based on U-series ages of corals and amino-acid age estimates of fossil mollusks from the lowest emergent terraces. In contrast, the E–W-trending segments of the California coastline between Point Conception and Los Angeles (200 km) parallel predominantly northward-dipping thrust and high-angle reverse faults of the western Transverse Ranges. Along this coast, marine terraces display significantly greater vertical deformation. Amino-acid age estimates of mollusks from elevated marine terraces along the Ventura—Santa Barbara coast imply anomalously high uplift rates of between 1 and 6 m/ka over the past 40 to 100 ka. The deduced rate of terrace uplift decreases from Ventura to Los Angeles, conforming with a similar trend observed by others in contemporary geodetic data. The more rapid rates of terrace uplift in the western Transverse Ranges reflect N—S crustal shortening that is probably a local accommodation of the dominant right-lateral shear strain along coastal California.

California↗
USGS1979

Two areas of probable holocene deformation in southwestern Utah

Recent geologic studies in southwestern Utah indicate two areas of probable Holocene ground deformation. 1. (1) A narrow arm of Lake Bonneville is known to have extended southward into Escalante Valley as far as Lund, Utah. Remnants of weakly developed shoreline features, which we have recently found, suggest that Lake Bonnevile covered an area of about 800 km 2 beyond its previously recognized limits near Lund. Shoreline elevations show a gradual increase from 1553 m near Lund to 1584 m at a point 50 km further southwest, representing a reversal of the pattern that would result from isostatic rebound. The conspicuously flat floor of Escalante Valley covers an additional 100 km 2 southward toward Enterprise, where its elevation is greater than 1610 m, but no shoreline features are recognizable; therefore, the former presence of the lake is only suspected. The measured 31-m rise over 50 km and the suspected 57-m rise in elevation over 70 km apparently occurred after Lake Bonnevile abandoned this area. The abandonment could have occurred as recently as 13,000 years ago, in which case the uplift is mainly of Holocene age. It probably has a deep-seated tectonic origin because it is situated above an inferred 9-km upwarp of the mantle that has been reported beneath the southern part of Escalante Valley on the basis of teleseismic P-wave residuals. 2. (2) Numerous closed topographic basins, ranging from a few hundred square meters to 1 km2 in area, are found at various elevations along the west margin of the Colorado Plateau northeast of Cedar City. Geologic mapping in that area indicates that the basins are located over complex structural depressions in which the rocks are faulted and folded. Several of the depressions are perched along the walls of the West Fork of Braffits Creek, one of a few north-draining creeks that have incised deeply into the plateau margin. Extremely active modern erosion by the creek has produced a 6-km-long gorge along which excellent exposures provide good evidence that the topographic depressions, as well as the entire valley, are located over a north-trending structural graben in which rocks of Cretaceous, Tertiary, and Quaternary age are complexly deformed. The trough appears to be actively subsiding, as evidenced by inward-dipping youthful scarps and V-shaped trenches found along both walls of the valley. The scarp on the east side is continuous for 1.5 km, and that on the west is discontinuous for the same distance. Charcoal-bearing alluvium from a sequence of faulted sedimentary debris in the inner gorge has yielded discordant dates by the 14C technique, but the dates suggest that at least 6 m of fault displacement occurred during the Late Holocene.

Utah↗
USGS1990

Role of heat and detachment in continental extension as viewed from the eastern basin and range province in Arizona

The Bill Williams River area of west-central Arizona includes not only the Rawhide-Buckskin metamorphic core complex, which is part of the lower Colorado River highly extended terrane (HET), but also the boundary between the extended terranes of the Basin and Range Province and the less deformed Arizona Transition Zone/Colorado Plateau. This provides important constraints on models that address the mechanisms for the mid- to late Tertiary deformation. Three phases of extension are present. The oldest is the extension associated with core-complex tectonism, which characteristically shows a lower plate composed of lineated mylonitic gneiss overlain by a detachment fault that is regionally nearly horizontal but undulates at the local scale. The fault in turn is overlain by an upper plate that includes Precambrian basement rocks, recrystallized Paleozoic sedimentary rocks, Mesozoic(?) metasedimentary and metavolcanic rocks of greenschist facies, and unaltered to hydrothermally altered syntectonic sedimentary and volcanic rocks of Miocene age. The upper plate is cut by closely spaced faults of modest structural relief that strike northwest and strongly rotate intervening blocks to face southwest. Most of these faults do not penetrate below the detachment fault. Fault spacing increases, and rotation decreases, to the northeast, away from the trace of the detachment. The second phase consists of “classic” Basin-Range high-angle normal faults that strike about north and have wide spacing, high structural relief, and modest rotation of blocks. These faults have no consistent direction of displacement and so produced horst and graben that form the ranges and basins visible today. This phase is locally superposed on Phase I, and also extends in more subdued form into the Transition Zone/Colorado Plateau. The third phase consists of tectonic quiescence and is present everywhere except parts of the Transition Zone that are still active seismically. The first phase occurred in the early and middle Miocene and was accompanied by deposition of syntectonic fluviolacustrine rocks (Suite I); the second (middle to late Miocene) was marked by interior-basin deposits (Suite II); the third (latest Miocene through Quaternary) is characterized by deposits related to through-flowing drainage. The phases grade into each other and thus are likely to be genetically related. Tectonic models must take into account not only the geographic distribution of deformation at any one time but also the time-dependent succession of deformation at any one place. A model proposed in this paper attempts to do this. The model is thermotectonic. A heating event in the lower crust, (basaltic intrusion, asthenospheric upwelling) combined with stretching, causes a sharp thermal front to rise within the crust. Embedded within the front is an “isotherm” that marks the brittle-ductile transition. As the front rises, it leaves behind a trail of shear zones, each marking a locus of preferred failure defined by mechanical or physical properties, or combinations thereof. The highest shear zone, now preserved in fossil form as the “detachment”, occurs where the front impinges on the meteoric groundwater, a few km below the topographic surface. The water steepens the thermal gradient at the front, which it stabilizes. A convective hydrothermal circulation system is established, causing alteration and mineralization above the ductile-brittle transition, as well as pore overpressure that results in hydrofracturing (producing monolithologic breccias) and the sliding of gravity-glide sheets. During these events, extension is taking place by brittle failure in the upper plate and ductile deformation below the detachment. Simultaneously, the hottest areas (core complexes) are updomed, promoting drainage reversals and the sliding of breccias and glide sheets. All this occurred only in the hottest areas or “blisters”, now marked by the core complexes. Distal areas showed less or no deformation at the surface. With time and the waning of the thermal event, the thermal front, and thus the brittle-ductile transition, smoothed out and sank, again leaving a trail of shear zones. Phase 1 deformation ceased and was replaced by Phase 2 deformation that occurred over a much wider area. Eventually, the front sank so deep that surface deformation ceased. This illustrates how the style of deformation at the surface may be a measure of the depth to the brittle-ductile transition. According to the thermotectonic model, extensional strain does not need to be constant along the detachment, in contrast to models involving simple shear through crustal-scale normal faults. On the contrary, one would expect strain to vary geographically as a function of maximum temperature attained, because of the well known relation between temperature and lithospheric strength. The thermotectonic model is also in good accord with geophysical characteristics of the Basin and Range Province, which suggests that extension was accompanied by intrusion of basalt into the lower crust, with consequent heating and anatexis. Many studies in the U.S. and elsewhere support the model by showing that continental extension commonly is accompanied by near-surface temperatures corresponding to the brittle-ductile transition, by steep thermal gradients, and by hydrothemal convective systems. A possible driving mechanism from the thermotectonic processes described by the model is the rise of asthenospheric domes or welts, which thin the lithosphere by subcrustal transfer while heating and stretching it. An asthenospheric welt that migrates northeastward while dying out might explain the encroachment of relatively subdued extension onto the Colorado Plateau, as well as the juxtaposition of compressive stress on the plateau with extensional stress in the adjacent Transition Zone and Basin and Range Province.

Arizona↗
USGS1993

An in vitro technique for surveying immunostimulants in fish

In vitro assays were developed to investigate the effects of immunostimulants on leukocytes in spleen sections of rainbow trout ( Oncorhynchus mykiss ). Fish spleens were divided, and individual sections were placed in 10 ml of tissue culture media and 0.1, 1, 10, or 100 μg/ml dilutions of Levamisole, QAC (quaternary ammonium compound), or ISK (a polypeptide). After 4 days of incubation, cell suspensions were prepared to examine the effects of the immunostimulants on neutrophil oxidative activity using the nitroblue tetrazolium (NBT) assay and on phagocytic activity by engulfment of glutaraldehyde-fixed sheep red blood cells. QAC induced a heightened activity in plates receiving 0.1 and 1.0 μg/ml, but suppressed activity at 10 and 100 μg/ml levels. Sections incubated with ISK showed heightened responses at all doses except 100 μg/ml. Levamisole showed heightened responses at all doses in the NBT assay, and at the 1.0 and 10 μg/ml doses in the phagocytic assay.

Aquaculture↗
USGS1988

Sedimentary biomarker and isotopic indicators of the paleoclimatic history of the Walker Lake basin, western Nevada

Walker Lake, a terminal saline lake in western Nevada, has experienced major fluctuations in its water level due to changes in the regional climate during Quaternary times. As part of a paleo-climatological study of western Nevada, we have investigated organic matter δ 13 C and C/N values and lipid biomarker contents of sediments deposited at various periods over the past 150 thousand years of lake history. Surficial sediments from two cross-lake transects contain mostly lake-derived organic matter. Diagenetic losses of organic matter are evident in deeper sediments, and the proportion of aquatic and terrigenous organic materials changes in response to variations in preservational factors. Source identification of organic matter is complicated by the probability that Walker Lake has experienced desiccation at various times in its history which impacts the degree of preservation of organic substances.

Nevada↗
USGS1991

Petrography of Permian “Gondwana” coals from boreholes in northwestern Bangladesh, based on semiautomated reflectance scanning

Drilling through Quaternary alluvium and Tertiary cover at low-gravity anomalies in northwestern Bangladesh showed the presence of Permian sedimentary rocks in depressions that may be as much as a thousand meters deep in the crystalline basement. These Permian strata include low-sulfur, high-volatile bituminous coals in beds as thick as 15 m. The maceral group composition of these coals was determined by semiautomated reflectance scanning with a motorized microscope stage, rather than by point counting. This method was chosen to give objectively recorded raw analytical data and to provide a graphical picture of each sample. The coals are mostly “Gondwana” type (poorly layered “plum pudding” with abundant minerals and inertinite in a vitrinite groundmass) that would be classed as semi-dull (inerto-gelitite) coals. However, six samples have more than 70% vitrinite. None of the samples would be classed as sapropelic (liptinitic). The upper, middle, and lower main seams in borehole GDH-45 were sampled in 10 benches (0.1–3 m thick) each. Inertinite ranges from 7 to 100 vol% (mineral free basis) in individual benches, but composite seam averages are 41, 54 and 67%. Inertinite increases toward the top of two main seams so the bottom would yield the most valuable first mine slices. Some benches with extremely high inertinite content, such as the top 7 m of the lower thick seam, might be mined specially for blending with foreign low-inert coals to increase coke strength. The free swelling index reaches 7.5 in several vitrinite-rich benches, which can indicate good coking coal. Much of the vitrinite is fluorescent, which indicates secondary bituminization characteristic of vitrinite in good coking coals. Ash yields range from 8 to 52%, with composite seam averages of 15, 14 and 24%. Rare visible pyrite is in veinlets or small nodules; framboids and dispersed pyrite are absent. In borehole GDH-40 near Barapukuria (200–500 m depth), the mean random reflectance of vitrinite “A” ranges from 0.60 to 0.80% R o and vitrinite “B” ranges from 0.55 to 0.65%. In borehole GDH-45 near Khalaspir (287–442 m), the reflectance of vitrinite ranges from 0.79 to 0.94%. In individual cases, the vitrinite is difficult to define because of semivitrinite at higher reflectance (forming a separate peak on several reflectograms) and because of surface bitumen films or resinous (?) inclusions at lower reflectance. On the basis of vitrinite reflectance, the coals can be considered to have entered the “main phase of bitumen generation” of organic thermal maturation as understood in petroleum geochemistry.

Organic Geochemistry↗
USGS1994

Laboratory simulation of hydrothermal petroleum formation from sediment in Escanaba Trough, offshore from northern California

Petroleum associated with sulfide-rich sediment is present in Escanaba Trough at the southern end of the Gorda Ridge spreading axis offshore from northern California within the Exclusive Economic Zone (EEZ) of the U.S. This location and occurrence are important for evaluation of the mineral and energy resource potential of the seafloor under U.S. jurisdiction. In Escanaba Trough, petroleum is believed to be formed by hydrothermal processes acting on mainly terrigenous organic material in Quaternary, river-derived sediment. To attempt to simulate these processes in the laboratory, portions of a Pleistocene gray-green mud, obtained from ∼ 1.5 m below the seafloor at a water depth of ∼ 3250 m in Escanaba Trough, were heated in the presence of water in four hydrous-pyrolysis experiments conducted at temperatures ranging from 250 to 350°C and at a pressure of 350 bar for 1.0–4.5 days. Distributions of n -alkanes, isoprenoid hydrocarbons, triterpanes, and steranes in the heated samples were compared with those in a sample of hydrothermal petroleum from the same area. Mud samples heated for less than 4.5 days at less than 350°C show changes in some, but not all, molecular marker ratios of organic compounds that are consistent with those expected during hydrothermal petroleum formation. Our results suggest that the organic matter in this type of sediment serves as one possible source for some of the compounds found in the hydrothermal petroleum.

California↗
USGS1986

Pb-, Sr- and Nd-Isotopic systematics and chemical characteristics of cenozoic basalts, Eastern China

Forty-eight Paleogene, Neogene and Quaternary basaltic rocks from northeastern and east-central China have been analyzed for major-element composition, selected trace-element contents, and Pb, Sr and Nd isotopic systematics. The study area lies entirely within the marginal Pacific tectonic domain. Proceeding east to west from the continental margin to the interior, the basalts reveal an isotopic transition in mantle source material and/or degree of crustal interaction. In the east, many of the rocks are found to merge both chemically and isotopically with those previously reported from the Japanese and Taiwan island-arc terrains. In the west, clear evidence exists for component(s) of Late Archean continental lithosphere to be present in some samples. A major crustal structure, the Tan-Lu fault, marks the approximate boundary between continental margin and interior isotopic behaviors. Although the isotopic signature of the western basalts has characteristics of lower-crustal contamination, a subcrustal lithosphere, i.e. an attached mantle keel, is probably more likely to be the major contributor of their continental “flavor”. The transition from continental margin to interior is very pronounced for Pb isotopes, although Sr and Nd isotopes also combine to yield correlated patterns that deviate strikingly from the mid-ocean ridge basalt (MORB) and oceanic-island trends. The most distinctive chemical attribute of this continental lithosphere component is its diminished U/Pb as reflected in the Pb isotopic composition when compared to sources of MORB, oceanic-island and island-arc volcanic rocks. Somewhat diminished Sm/Nd and elevated Rb/Sr, especially in comparison to the depleted asthenospheric mantle, are also apparent from the Nd- and Sr-isotopic ratios.

Chemical Geology↗
USGS1990

Climatic influences on species: Evidence from the fossil record

The detailed Neogene and Quaternary paleoclimatic reconstructions now available provide a means to test how species respond to environmental change. Paleontologic studies of marine organisms show that climatic change causes evolution (via cladogenesis and anagenesis), ecophenotypic variation, migration, morphologic stasis and extinction. Evolution during climatic change is a rare event relative to the number of climatic cycles that have occurred, but climate-related environmental barriers, usually temperature, may play an important role in the isolation of populations during allopatric speciation.

Trends in Ecology and Evolution↗
USGS1989

A record of Appalachian denudation in postrift Mesozoic and Cenozoic sedimentary deposits of the U.S. Middle Atlantic continental margin

The complex interplay between source-terrain uplift, basin subsidence, paleoclimatic shifts, and sea-level change, left an extensive sedimentary record in the contiguous offshore basins of the U.S. middle Atlantic margin (Salisbury Embayment, Baltimore Canyon Trough, and Hatteras Basin). Isopach maps of 23 postrift (Lower Jurassic to Quaternary) a allostratigraphic units, coupled with a revised stratigraphic framework, reveal that tectonism, by regulating sediment supply (accumulation rate), dominated the interplay of forcing mechanisms. Tectonic pulses are evidenced by abruptly accelerated sediment accumulation, marked latitudinal shifts in the location of depocenters, and regional changes in lithofacies. Relatively rapid tectonic subsidence during the Early and Middle Jurassic history of the basins may have enhanced sediment accumulation rates. Beginning in the Late Jurassic, however, subsidence rates decreased significantly, though occasional short pulses of subsidence may have effected relative sea-level rises. Sea-level change heavily influenced the distribution and redistribution of sediments one they reached the basins, and paleoclimate regulated the relative abundance of carbonates and evaporites in the basins. We conclude that source terrains of the central Appalachian Highlands were tectonically uplifted, intensely weathered, and rapidly eroded three times since the Late Triassic: (1) Early to Middle Jurassic (Aalenian to Callovian); (2) mid-Early Cretaceous (Barremian); and (3) Late Cenozoic (Middle Miocene). Intervals of tectonic quiescence following these three tectonic pulses provided conditions suitable for the formation of regional erosion surfaces, geomorphic features commonly reported to characterize the central Appalachian Highlands. This series of three, irregularly spaced, tectonic/quiescent cycles does not, however, match the traditional four-cycle concept of post-Triassic Appalachian “peneplanation”.

Geomorphology↗
USGS1991

Debris flows as geomorphic agents in the Huachuca Mountains of southeastern Arizona

Numerous debris flows occurred in the Huachuca Mountains of southeastern Arizona during the summer rainy season of 1988 in areas that were burned by a forest fire earlier in the summer. Debris flows occurred following a major forest fire in 1977 as well, suggesting a causal link between fires and debris flows. Abundant evidence of older debris flows preserved along channels and in mountain front fans indicates that debris flows have occurred repeteadly during the late Quaternary in this environment. Soil development in sequences of debris-flow deposits indicates that debris flows probably recur over time intervals of several hundred to a thousand years in individual drainage basins in the study area. Surface runoff in the steep drainage basins of the Huachuca Mountains is greatly enhanced following forest fires, as the hillslopes are denuded of their vegetative cover. Water and sediment eroded from the hillslope regolith are rapidly introduced into the upper reaches of tributary channels by widespread rilling and slope wash during rainfall events. This influx of water and sediment destabilizes regolith previously accumulated in the channel, triggering debris flows that scour the channel to bedrock in the upper reaches. Following a debris flow, the scoured, trapezoidally-shaped channel gradually assumes a swale shape and the percentage of exposed bedrock declines, as material is introduced from the slopes. Debris flows do a tremendous amount of work in a very short time, however, and are the major channel-forming events. Where the tributary channels enter larger, trunk channels, the debris flows serve as the main source of very coarse sediment. The local slope and coarse particle distribution of the trunk channel depend on the competence of water flows in the channel to transport the material introduced by debris flows. Where the smaller channels drain directly to the mountain front, debris flows create extensive alluvial fans which dominate the morphology of the basin-range boundary. Time intervals between debris flows in the drainage basins of the Huachuca Mountains are probably controlled by complex interactions among climate, forest fires and slope processes. Fires destroy the protective vegetation that stabilizes the upper catchment slopes and inhibits erosion. However, not every fire that burns a catchment causes debris flows, because sufficient weathered material must accumulate in the upper channel reaches to initiate a large debris flow. If such accumulation has not occurred, the material introduced to a channel following a forest fire will move only a short distance down the channel. Thus, the episodic nature of debris flows probably depends on rates of slope weathering and erosion, which are in turn controlled by climate, both directly and through vegetation and forest fires.

Geomorphology↗
USGS1994

Flood geomorphology of Arthurs Rock Gulch, Colorado: paleoflood history

Episodic late Quaternary flooding is recorded by bouldery deposits and slackwater sediments along Arthurs Rock Gulch, an ephemeral stream west of Fort Collins, Colorado. Flood deposits consist of individual granodiorite and pegmatite boulders, boulder bars, and coarse overbank sediment that rest on erosional terrace segments along the channel. We identified evidence for at least five flood in the lower two thirds of the 1.84 km 2 drainage basin. Flood deposits are differentiated by their position above the active channel, weathering characteristics, degree of boulder burial by colluvium, amount of lichen cover, and position with respect to terrace and colluvial deposits. Age estimates for the flood deposits are based on radiocarbon dating, tree-ring analyses, and relative-age criteria from four sites in the basin. At least two floods occurred in the last 300 years; a third flood is at least 5000 years old, but likely younger than 10,000 yr BP; and the two oldest floods occurred at least 40,000 years BP.

Geomorphology↗
USGS1990

Late cenozoic subduction complex of Sicily

Besides remnants of Hercynian deformations in the Peloritani nappe and of pre-Oligocene Alpine structures in the Troiani nappe, most compressive structures observed in the Sicilian accretionary wedge result from the late Cenozoic (Tortonian to Present) continental subduction of the Apulia (Iblei) block, and are thus synchronous with distensive structures related to the opening of the Tyrrhenian Sea. Syntectonic deposits fill southward-migrating foredeeps in a sequential fashion, and the dating of these deposits helps to constrain the timing of deformation. Similarly, Plio-Quaternary sediments, eroded from the accreted units, rest on top of the allochthon in either compressive piggy-back depressions or extensional basins. The age and configuration of these overlap deposits constrain our reconstructions of the subsurface geometry of the underlying peri-Tyrrhenian detachment faults or S-verging thrust-faults. Post-depositional erosion, normal faulting and syntectonic filling of basins contribute to maintaining the critical taper of the prism, whose geometry is continuously altered owing to frontal accretion, underplating and isostatic uplift.

Journal of Structural Geology↗
USGS1991

Segmentation and the coseismic behavior of basin and range normal faults. Examples from east-central Idaho and southwestern Montana, USA

The range-front normal faults of the Lost River and Lemhi Ranges, and the Beaverhead and Tendoy Mountains in east-central Idaho and southwestern Montana have well-preserved fault scarps on Quaternary deposits along much of their lengths. Fault-scarp morphology, the age of deposits displaced by the faults, and the morphology of the range fronts provide a basis for dividing the faults into segments that are typically 20-25 km long. Four characteristics are recognized that help to identify segment boundaries: (1) major en echelon offsets or pronounced gaps in the continuity of fault scarps; (2) distinct, persistent, along-strike changes in fault-scarp morphology that indicate different ages of faulting; (3) major salients in the range front; and (4) transverse bedrock ridges where the cumulative throw is low compared to other places along the fault zone. Only features whose size is measured on the scale of kilometers are regarded as significant enough to represent a segment boundary that could inhibit or halt a propagating rupture. The ability to identify segments of faults that are likely to behave as independent structural entities will improve seismic-hazard assessment. However, one should not assume that the barriers at segment boundaries will completely stop all propagating ruptures.

Journal of Structural Geology↗
USGS1995

Stratigraphic and palaeoenvironmental summary of the south-east Georgia embayment: a correlation of exploratory wells

A Continental Offshore Stratigraphic Test (COST) well and six exploratory wells have been drilled in the south-east Georgia embayment. The oldest rocks penetrated are weakly metamorphosed Lower Ordovician quartz arenites and Silurian shales and argillites in the Transco 1005-1 well and Upper Devonian argillites in the COST GE-1 well. These marine strata, which are equivalent to the Tippecanoe sequence in Florida, underlie the post-rift unconformity and represent part of a disjunct fragment of Gondwana that was sutured to the North American craton during the late Palaeozoic Alleghanian orogeny. The Palaeozoic strata are unconformably overlain by interbedded non-marine Jurassic (Bajocian and younger) sandstones and shales and marginal marine Lower Cretaceous sandstones, calcareous shales and carbonates, which contain scattered beds of coal and evaporite. Together, these rocks are stratigraphically equivalent to the onshore Fort Pierce and Cotton Valley(?) Formations and rocks of the Lower Cretaceous Comanchean Provincial Series. The abundance of carbonates and evaporites in this interval, which reflects marine influences within the embayment, increases upwards, eastwards and southwards. The Upper Cretaceous part of the section is composed mainly of neritic calcareous shales and shaley limestones stratigraphically equivalent to the primarily marginal marine facies of the onshore Atkinson, Cape Fear and Middendorf Formations and Black Creek Group, and to limestones and shales of the Lawson Limestone and Peedee Formations. Cenozoic strata are primarily semiconsolidated marine carbonates. Palaeocene to middle Eocene strata are commonly cherty; middle Miocene to Pliocene strata are massive and locally phosphatic and glauconitic; Quaternary sediments are dominated by unconsolidated carbonate sands. The effects of eustatic changes and shifts in the palaeocirculation are recorded in the Upper Cretaceous and Tertiary strata.

Georgia↗
USGS1978

Chemical composition and distribution of lithium-rich brines in salar de Uyuni and nearby salars in southwestern Bolivia

Preliminary investigations at Salar de Uyuni and the nearby salars (salt pans) of Coipasa and Empexa in the southern part of the Bolivian Altiplano show the presence of widespread lithium-rich brines. Widely scattered brine samples from Salar de Uyuni, which has an area of about 9000 km 2 and is the largest salt pan on earth, show lithium values ranging from 80 to 1500 ppm. High values of 300–700 ppm are most prevalent in an area of about 2500 km 2 in the east-central and southeastern part of the salar. A few brine samples in small areas in Coipasa and Empexa Salars have values ranging from 170 to 580 ppm Li. All the brines are essentially saturated with halite and are moderately high in sulfate (5000–15,000 ppm SO 4 ) but low in carbonate (<500 ppm HCO 3 ). Potassium and magnesium values are relatively high, chiefly in the range of 2000–20,000 ppm, and the K Mg "> KMg ratio is about 1:1. The Li K "> LiK and Li Mg "> LiMg ratios are relatively constant at about 1:20. The crystalline saline material and brines in these salars are residual from a former large lake, Lago Minchin, that occupied much of the southern Bolivian Altiplano during late Pleistocene time, augmented by saline material carried to the salars by streams since final drying of this lake. Thermal springs associated with rhyolitic volcanic rocks of Quaternary age may have been a major source of the lithium.

Energy↗
USGS1993

Geology of kilauea volcano

This paper summarizes studies of the structure, stratigraphy, petrology, drill holes, eruption frequency, and volcanic and seismic hazards of Kilauea volcano. All the volcano is discussed, but the focus is on its lower cast rift zone (LERZ) because active exploration for geothermal energy is concentrated in that area. Kilauea probably has several separate hydrothermal-convection systems that develop in response to the dynamic behavior of the volcano and the influx of abundant meteoric water. Important features of some of these hydrothermal-convection systems are known through studies of surface geology and drill holes. Observations of eruptions during the past two centuries, detailed geologic mapping, radiocarbon dating, and paleomagnetic secular-variation studies indicate that Kilauea has erupted frequently from its summit and two radial rift zones during Quaternary time. Petrologic studies have established that Kilauea erupts only tholeiitic basalt. Extensive ash deposits at Kilauea's summit and on its LERZ record locally violent, but temporary, disruptions of local hydrothermal-convection systems during the interaction of water or steam with magma. Recent drill holes on the LERZ provide data on the temperatures of the hydrothermal-convection systems, intensity of dike intrusion, porosity and permeability, and an increasing amount of hydrothermal alteration with depth. The prehistoric and historic record of volcanic and seismic activity indicates that magma will continue to be supplied to deep and shallow reservoirs beneath Kilauea's summit and rift zones and that the volcano will be affected by eruptions and earthquakes for many thousands of years. ?? 1993.

Geothermics↗