Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Geophysical Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71Linked to original sources
USGS1996

Coral ages and island subsidence, Hilo drill hole

A 25.8-m-thick sedimentary section containing coral fragments occurs directly below a surface lava flow (the ∼1340 year old Panaewa lava flow) at the Hilo drill hole. Ten coral samples from this section dated by accelerator mass spectrometry (AMS) radiocarbon and five by thermal infrared multispectral scanner (TIMS) 230 Th/U methods show good agreement. The calcareous unit is 9790 years old at the bottom and 1690 years old at the top and was deposited in a shallow lagoon behind an actively growing reef. This sedimentary unit is underlain by a 34-m-thick lava flow which in turn overlies a thin volcaniclastic silt with coral fragments that yield a single 14 C date of 10,340 years. The age-depth relations of the dated samples can be compared with proposed eustatic sea level curves after allowance for island subsidence is taken. Island subsidence averages 2.2 mm/yr for the last 47 years based on measurements from a tide gage near the drill hole or 2.5–2.6 mm/yr for the last 500,000 years based on the ages and depths of a series of drowned coral reefs offshore from west Hawaii. The age-depth measurements of coral fragments are more consistent with eustatic sea levels as determined by coral dating at Barbados and Albrolhos Islands than those based on oxygen isotopic data from deep sea cores. The Panaewa lava flow entered a lagoon underlain by coral debris and covered the drill site with 30.9 m of lava of which 11 m was above sea level. This surface has now subsided to 4.2 m above sea level, but it demonstrates how a modern lava flow entering Hilo Bay would not only change the coastline but could extensively modify the offshore shelf.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Stress/strain changes and triggered seismicity at The Geysers, California

The principal results of this study of remotely triggered seismicity in The Geysers geothermal field are the demonstration that triggering (initiation of earthquake failure) depends on a critical strain threshold and that the threshold level increases with decreasing frequency, or, equivalently, depends on strain rate. This threshold function derives from (1) analyses of dynamic strains associated with surface waves of the triggering earthquakes, (2) statistically measured aftershock zone dimensions, and (3) analytic functional representations of strains associated with power production and tides. The threshold is also consistent with triggering by static strain changes and implies that both static and dynamic strains may cause aftershocks. The observation that triggered seismicity probably occurs in addition to background activity also provides an important constraint on the triggering process. Assuming the physical processes underlying earthquake nucleation to be the same, Gomberg [this issue] discusses seismicity triggered by the M W 7.3 Landers earthquake, its constraints on the variability of triggering thresholds with site, and the implications of time delays between triggering and triggered earthquakes. Our results enable us to reject the hypothesis that dynamic strains simply nudge prestressed faults over a Coulomb failure threshold sooner than they would have otherwise. We interpret the rate-dependent triggering threshold as evidence of several competing processes with different time constants, the faster one(s) facilitating failure and the other(s) inhibiting it. Such competition is a common feature of theories of slip instability. All these results, not surprisingly, imply that to understand earthquake triggering one must consider not only simple failure criteria requiring exceedence of some constant threshold but also the requirements for generating instabilities.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Hydrogeology of the Hawaii Scientific Drilling Project borehole KP-1 1. Hydraulic conditions adjacent to the well bore

Temperature and formation resistivity logs obtained in borehole KP-1 of the Hawaii Scientific Drilling Project indicate that the adjacent formation is characterized by several zones of distinctly different average temperature and water salinity. A series of hydraulic analyses and water sampling programs were conducted to rule out the possibility of local hydraulic effects associated with the presence of the borehole in the generation of these apparent groundwater zones. Hydraulic tests and sampling with the borehole cased to a depth of 710 m and open below that depth indicate that the deep aquifer contains seawater at a temperature nearly identical to that of the open ocean at the same depth. Various analyses give estimates of aquifer transmissivity of about 10-3 m2/s in the vicinity of the borehole. Isolation of this deeper aquifer from the overlying groundwater zones was investigated by perforating the casing at six locations and then measuring the changes in water level in the borehole, in the salinity of the fluid column, in the temperature profile of the fluid column, and in the rate of flow in the fluid column induced by the perforations. These results positively confirm that the zones of distinctly different formation properties indicated on the temperature and resistivity logs are not caused by flow in or around casing. Flow and fluid column salinity induced by the perforations also confirm significant differences between the hydraulic heads and geochemistry of the different groundwater zones inferred from the well logs.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Thermal and mass implications of magmatic evolution in the Lassen volcanic region, California, and minimum constraints on basalt influx to the lower crust

We have analyzed the heat and mass demands of a petrologic model of basalt-driven magmatic evolution in which variously fractionated mafic magmas mix with silicic partial melts of the lower crust. We have formulated steady state heat budgets for two volcanically distinct areas in the Lassen region: the large, late Quaternary, intermediate to silicic Lassen volcanic center and the nearby, coeval, less evolved Caribou volcanic field. At Caribou volcanic field, heat provided by cooling and fractional crystallization of 52 km 3 of basalt is more than sufficient to produce 10 km of rhyolitic melt by partial melting of lower crust. Net heat added by basalt intrusion at Caribou volcanic field is equivalent to an increase in lower crustal heat flow of ∼7 mW m −2 , indicating that the field is not a major crustal thermal anomaly. Addition of cumulates from fractionation is offset by removal of erupted partial melts. A minimum basalt influx of 0.3 km 3 (km 2 Ma) −1 is needed to supply Caribou volcanic field. Our methodology does not fully account for an influx of basalt that remains in the crust as derivative intrusives. On the basis of comparison to deep heat flow, the input of basalt could be ∼3 to 7 times the amount we calculate. At Lassen volcanic center, at least 203 km 3 of mantle-derived basalt is needed to produce 141 km 3 of partial melt and drive the volcanic system. Partial melting mobilizes lower crustal material, augmenting the magmatic volume available for eruption at Lassen volcanic center; thus the erupted volume of 215 km 3 exceeds the calculated basalt input of 203 km 3 . The minimum basalt input of 1.6 km 3 (km 2 Ma) −1 is >5 times the minimum influx to the Caribou volcanic field. Basalt influx high enough to sustain considerable partial melting, coupled with locally high extension rate, is a crucial factor in development of Lassen volcanic center; in contrast, Caribou volcanic field has failed to develop into a large silicic center primarily because basalt supply there has been insufficient.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Rheology of water ices V and VI

We have measured the mechanical strength (σ) of pure water ices V and VI under steady state deformation conditions. Constant displacement rate compressional tests were conducted in a gas apparatus at confining pressures from 400 < P < 800 MPa, temperatures from 209 < T < 270 K, and strain rates 7 × 10 −7 < < 7 × 10 −4 s −1 . Most of the results fit to an empirical flow law of the form = A σ n exp {−( E * + PV *)/ RT }, where the four material constants A , n , E *, and V * are (for in inverse seconds and P and σ in megapascals) 10 23.0 , 6.0, 136 kJ/mol, and 29 cm 3 /mol, respectively, for ice V; and 10 6.7 , 4.5, 66 kJ/mol, and 11 cm 3 /mol, respectively, for ice VI. Ice VI may weaken to a mechanism of higher E * at T > 250 K. Ices V and VI are thus rheologically distinct but by coincidence have approximately the same strength under the conditions chosen for these experiments. To avoid misidentification, these tests are therefore accompanied by careful observations of the occurrences and characteristics of phase changes. One sample each of ice V and VI was quenched at pressure to metastably retain the high-pressure phase and the acquired deformation microstructures; X ray diffraction analysis of these samples confirmed the phase identification. Surface replicas of the deformed and quenched samples suggest that ice V probably deforms largely by dislocation creep, while ice VI deforms by a more complicated process involving substantial grain size reduction through recrystallization.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Cyclic stressing and seismicity at strongly coupled subduction zones

We use the finite element method to analyze stress variations in and near a strongly coupled subduction zone during an earthquake cycle. Deformation is assumed to be uniform along strike (plane strain on a cross section normal to the trench axis), and periodic earthquake slip is imposed consistent with the long-term rate of plate convergence and degree of coupling. Simulations of stress and displacement rate fields represent periodic fluctuations in time superimposed on an average field. The oceanic plate, descending slab, and continental lithosphere are assumed here to respond elastically to these fluctuations, and the remaining mantle under and between plates is assumed to respond as Maxwell viscoelastic. In the first part of the analysis we find that computed stress fluctuations in space and time are generally consistent with observed earthquake mechanism variations with time since a great thrust event. In particular, trench-normal extensional earthquakes tend to occur early in the earthquake cycle toward the outer rise but occur more abundantly late in the cycle in the subducting slab downdip of the main thrust zone. Compressional earthquakes, when they occur at all, have the opposite pattern. Our results suggest also that the actual timing of extensional outer rise events is controlled by the rheology of the shallow aseismic portion of the thrust interface. The second part of the analysis shows the effects of mantle relaxation on the rate of ground surface deformation during the earthquake cycle. Models without relaxation predict a strong overall compressional strain rate in the continental plate above the main thrust zone, with the strain rate constant between mainshocks. However with significant relaxation present, a localized region of unusually low compressional, or even slightly extensional, strain rate develops along the surface of the continental plate above and somewhat inland from the downdip edge of the locked main thrust zone. The low strain rate starts in the middle or late part of the cycle, depending on position. This result suggests that the negligible or small contraction measured on the Shumagin Islands, Alaska, during 1980 to 1991, may not invalidate an interpretation of that region as being a moderately coupled subduction zone. In contrast, mantle relaxation causes only modest temporal nonuniformity of uplift rates in the overriding plate and of extensional stress rates in the subducting plate, even when the Maxwell time is an order of magnitude less than the recurrence interval.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

The 40Ar/39Ar and K/Ar dating of lavas from the Hilo 1-km core hole, Hawaii Scientific Drilling Project

Mauna Kea lava flows cored in the Hilo hole range in age from <200 ka to about 400 ka based on 40 Ar/ 39 Ar incremental heating and K‐Ar analyses of 16 groundmass samples and one coexisting plagioclase. The lavas, all subaerially deposited, include a lower section consisting only of tholeiitic basalts and an upper section of interbedded alkalic, transitional tholeiitic, and tholeiitic basalts. The lower section has yielded predominantly complex, discordant 40 Ar/ 39 Ar age spectra that result from mobility of 40 Ar and perhaps K, the presence of excess 40 Ar, and redistribution of 39 Ar by recoil. Comparison of K‐Ar ages with 40 Ar/ 39 Ar integrated ages indicates that some of these samples have also lost 39 Ar. Nevertheless, two plateau ages of 391 ± 40 and 400 ± 26 ka from deep in the hole, combined with data from the upper section, show that the tholeiitic section accumulated at an average rate of about 7 to 8 m/kyr and has a mean recurrence interval of 0.5 kyr/flow unit. Samples from the upper section yield relatively precise 40 Ar/ 39 Ar plateau and isotope correlation ages of 326 ± 23, 241 ± 5, 232 ± 4, and 199 ± 9 ka for depths of −415.7 m to −299.2 m. Within their uncertainty, these ages define a linear relationship with depth, with an average accumulation rate of 0.9 m/kyr and an average recurrence interval of 4.8 kyr/flow unit. The top of the Mauna Kea sequence at −280 m must be older than the plateau age of 132 ± 32 ka, obtained for the basal Mauna Loa flow in the corehole. The upward decrease in lava accumulation rate is a consequence of the decreasing magma supply available to Mauna Kea as it rode the Pacific plate away from its magma source, the Hawaiian mantle plume. The age‐depth relation in the core hole may be used to test and refine models that relate the growth of Mauna Kea to the thermal and compositional structure of the mantle plume.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Origin and depositional environment of clastic deposits in the Hilo drill hole, Hawaii

Volcaniclastic units cored at depths of about 87, 164, 178, 226, and 246 m below sea level and carbonate units located between depths of 27 and 53 m below sea level in the Hilo drill core were found to be deposited at or near sea level. Four of these units are hydroclastic deposits, formed when subaerially erupted Mauna Loa lava flows entered the ocean and fragmented to produce quenched, glassy fragments during hydrovolcanic explosions. Ash units 24 and 26, at 178 m depth, accumulated at sea level in a freshwater bog. They contain pyroxenes crystallized from tholeiitic magma that we infer erupted explosively at the summit of Kilauea volcano. Two carbon‐rich layers from these ashes have a weighted average radiocarbon age of 38.6 ± 0.9 ka; the ashes probably correlate with the oldest and thickest part of the Pahala ash. Ash unit 44, at the transition from Mauna Kea to Mauna Loa lava flows, was probably nearly 3.2 m thick and is inferred to be equivalent to the lower thick part of the composite Homelani ash mapped in Hilo and on the flanks of Mauna Kea. The age of this part of Homelani ash is between 128 ± 33 and 200 ± 10 ka; it may have erupted subglacially during the Pohakuloa glacial maxima on Mauna Kea. Beach sand units 12 and 22 were derived from nearby Mauna Loa and Mauna Kea lava flows. The middle of beach sand unit 38 was derived mainly from lava erupted near the distal end of the subaerial east rift zone of Kilauea volcano; these sands were transported about 33 km northwest to Hilo Bay by prevailing longshore currents. Combined age, depth, and sea level markers in the core allow us to determine that lava flow recurrence intervals averaged one flow every 4 kyr during the past 86 kyr and one flow every 16 kyr between 86 and 200 ka at the drill site and that major explosive eruptions that deposit thick ash in Hilo have occurred only twice in the last 400 kyr. These recurrence intervals support the moderate lava flow hazard zonation (zone 3) for coastal Hilo previously determined from surficial mapping.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Crustal structure of the Colorado Plateau, Arizona: Application of new long-offset seismic data analysis techniques

The Colorado Plateau is a large crustal block in the southwestern United States that has been raised intact nearly 2 km above sea level since Cretaceous marine sediments were deposited on its surface. Controversy exists concerning the thickness of the plateau crust and the source of its buoyancy. Interpretations of seismic data collected on the plateau vary as to whether the crust is closer to 40 or 50 km thick. A thick crust could support the observed topography of the Colorado Plateau isostatically, while a thinner crust would indicate the presence of an underlying low-density mantle. This paper reports results on long-offset seismic data collected during the 1989 segment of the U.S. Geological Survey Pacific to Arizona Crustal Experiment that extended from the Transition Zone into the Colorado Plateau in northwest Arizona. We apply two new methods to analyze long-offset data that employ finite difference travel time calculations: (1) a first-arrival time inverter to find upper crustal velocity structure and (2) a forward-modeling technique that allows the direct use of the inverted upper crustal solution in modeling secondary reflected arrivals. We find that the crustal thickness increases from 30 km beneath the metamorphic core complexes in the southern Basin and Range province to about 42 km beneath the northern Transition Zone and southern Colorado Plateau margin. We observe some crustal thinning (to ∼37 km thick) and slightly higher lower crustal velocities farther inboard; beneath the Kaibab uplift on the north rim of the Grand Canyon the crust thickens to a maximum of 48 km. We observe a nonuniform crustal thickness beneath the Colorado Plateau that varies by ∼15% and corresponds approximately to variations in topography with the thickest crust underlying the highest elevations. Crustal compositions (as inferred from seismic velocities) appear to be the same beneath the Colorado Plateau as those in the Basin and Range province to the southwest, implying that the plateau crust represents an unextended version of the Basin and Range. Some of the variability in crustal structure appears to correspond to preserved lithospheric discontinuities that date back to the Proterozoic Era.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Analysis of fractures intersecting Kahi Puka Well 1 and its relation to the growth of the island of Hawaii

As part of the Hawaii Scientific Drilling Project, Kahi Puka Well 1 penetrated about 275 m of Mauna Loa basalts overlying a sequence of Mauna Kea flow units as it was drilled and cored to a total depth of 1053 m below land surface. A borehole televiewer (BHTV) was run in most of the well in successive stages prior to casing in order to obtain magnetically oriented acoustic images of the borehole wall. A total of 283 individual fractures were identified from this log and characterized in terms of strike and dip. These data are divided into three vertical sections based upon age and volcanic source, and lower hemisphere stereographic plots identify two predominant, subparallel fracture subsets common to each section. Assuming that most of the steeply dipping fractures observed in the BHTV log are tensile features generated within basalt flows during deposition and cooling, this fracture information can be combined with models of the evolution of the island of Hawaii to investigate the depositional history of these Mauna Loa and Mauna Kea basalts over the past 400 kyr. The directions of high-angle fractures appear to be generally parallel to topography or to the coastline at the time of deposition, as is supported by surface mapping of modern flows. Consequently, an overall counterclockwise rotation of about 75?? in the strike of these fractures from the bottom to the top of the well represents a systematic change in depositional slope direction over time. We attribute the observed rotation in the orientations of the two predominant fracture subsets over the past 400 kyr to changes in the configurations of volcanic sources during shield building and to the structural interference of adjacent volcanoes that produces shifts in topographic patterns.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Satellite imagery of the onset of streaming flow of ice streams C and D, West Antarctica

Five overlapping Landsat multispectral scanner satellite images of the interior of the West Antarctic ice sheet were enhanced with principal component analysis, high-pass filtering, and linear contrast stretching and merged into a mosaic by aligning surface features in the overlap areas. The mosaic was registered to geodetic coordinates, to an accuracy of about 1 km, using the five scene centers as control points. The onset of streaming flow of two tributaries of ice stream C and one tributary of ice stream D is visible in the mosaic. The onset appears to occur within a relatively short distance, less than the width of the ice stream, typically at a subglacial topographic feature, such as a step or ridge. The ice streams extend farther up into the interior than previously mapped. Ice stream D starts about 150 km from the ice divide, at an altitude of about 1500 m, approximately halfway up the convex-upward dome shape of the interior ice sheet. Ice stream D is relatively much longer than ice stream C, possibly because ice stream D is currently active, whereas ice stream C is currently inactive. The grounded portion of the West Antarctic ice sheet is perhaps best conceptualized as an ice sheet in which ice streams are embedded over most of its area, with slow-moving ice converging into fast-moving ice streams in a widely distributed pattern, much like that of streams and rivers in a hydrologic basin. A relic margin appears to parallel most of the south margin of the tributary of ice stream D, separated from the active shear margin by about 10 km or less for a distance of over 200 km. This means there is now evidence for recent changes having occurred in three of the five major ice streams which drain most of West Antarctica (B, C, and D), two of which (B and D) are currently active.

Journal of Geophysical Research C: Oceans↗
USGS1996

Southern Ocean monthly wave fields for austral winters 1985-1988 by Geosat radar altimeter

Four years of monthly averaged wave height fields for the austral winters 1985–1988 derived from the Geosat altimeter data show a spatial variability of the scale of 500–1000 km that varies monthly and annually. This variability is superimposed on the zonal patterns surrounding the Antarctic continent and characteristic of the climatology derived from the U.S. Navy [1992] Marine Climatic Atlas of the World. The location and the intensity of these large-scale features, which are not found in the climatological fields, exhibit strong monthly and yearly variations. A global underestimation of the climatological mean wave heights by more than 1 m is also found over large regions of the Southern Ocean. The largest monthly averaged significant wave heights are above 5 m and are found during August of every year in the Indian Ocean, south of 40°S. The monthly wave fields show more variability in the Atlantic and Pacific Oceans than in the Indian Ocean. The Seasat data from 1978 and the Geosat data from 1985 and 1988 show an eastward rotation of the largest wave heights. However, this rotation is absent in 1986 and 1987; the former was a year of unusually low sea states, and the latter was a year of unusually high sea states, which suggests a link to the El Niño-Southern Oscillation event of 1986.

Journal of Geophysical Research C: Oceans↗
USGS1996

Cadmium in the California Current system: Tracer of past and present upwelling

Over 100 samples were collected off the west coast of North America during 1991–1993 to determine the relation between wind‐driven upwelling and nearshore concentrations of dissolved silicate (Si), phosphate (P), and cadmium (Cd). Highly enriched in deep water offshore, these constituents are sensitive indicators of upwelling. Coastal water was sampled from the shore in January and June 1992 at 12 sites distributed between 36° and 48°N latitude. In January the composition of nearshore water along this transect was fairly uniform: 5–15 μmol/kg for Si, 0.5 to 1.0 μmol/kg for P, and 0.1–0.3 nmol/kg for Cd. In June, elevated concentrations of Si (30 μmol/kg), P (2.0 μmol/kg), and Cd (0.6 nmol/kg) revealed a region of intense upwelling between 38° and 40°N. The pattern is broadly consistent with meridional gradients in coastal upwelling calculated from the long‐term mean of alongshore winds compiled from ship reports. Nearshore water was also collected biweekly to monthly at two sites 3 km apart near San Francisco Bay (37.5°N) during 1991–1993. The variability seen in the time series suggests that the composition of nearshore water integrates the effect of alongshore winds over timescales of several weeks. Seasonal variations in Si (5–50 μmol/kg), P (0.5–2.5 μmol/kg), and Cd (0.1–0.8 nmol/kg) concentrations were consistent with upwelling during spring and summer. Maximum Si, P, and Cd concentrations reached in May 1991 were consistent with advection to the very nearshore region from a depth of about 300 m relative to a vertical profile at a distance of 200 km from the coast. Nearshore Si, P, and Cd concentrations were reduced relative to 1991 in 1992, and, to a lesser extent, in 1993 due to weaker upwelling linked to the warm phase of the El Niño‐Southern Oscillation. During periods of weaker upwelling or downwelling, variations in P, Si, and Cd concentrations became uncoupled. There is a good correlation between the coastal Cd time series near San Francisco Bay (37.5°N) and a second order polynomial function of the upwelling index of Bakun [1975] at 36°N, filtered with a 30‐day running mean ( r 2 = 0.71, n = 39). The index is a daily estimate of coastal upwelling calculated from 6‐hourly mean atmospheric pressure distributions at 36°N. From this function and a record of daily upwelling indices, we infer a range of annually averaged coastal Cd concentrations of at least 0.3–0.5 nmol/kg since 1967. Cd/Ca ratios in shells of foraminifera from San Francisco Bay suggest that average coastal Cd concentrations 3500–4500 years ago were at the upper end of this range.

Journal of Geophysical Research C: Oceans↗
USGS1996

Potential climatic impacts of vegetation change: A regional modeling study

The human species has been modifying the landscape long before the development of modern agrarian techniques. Much of the land area of the conterminous United States is currently used for agricultural production. In certain regions this change in vegetative cover from its natural state may have led to local climatic change. A regional climate version of the Colorado State University Regional Atmospheric Modeling System was used to assess the impact of a natural versus current vegetation distribution on the weather and climate of July 1989. The results indicate that coherent regions of substantial changes, of both positive and negative sign, in screen height temperature, humidity, wind speed, and precipitation are a possible consequence of land use change throughout the United States. The simulated changes in the screen height quantities were closely related to changes in the vegetation parameters of albedo, roughness length, leaf area index, and fractional coverage.

Journal of Geophysical Research D: Atmospheres↗
USGS1996

Modeling of fluidized ejecta emplacement over digital topography on Venus

The FLOW computer model of McEwen and Malin (1989) modified for application to the study of Venus fluidized ejecta blankets (FEBs) demonstrates that relatively low viscosities, yield strengths, and initial velocities are required to duplicate the observed flow paths of the outflow materials. The model calculates the velocities and simulated flow paths of gravity flows over Magellan topography. The model is formulated to determine flow movements from initial conditions, gravitational acceleration, and resistance to motion as described by Coulomb, viscous, and turbulent resistance forces. Successful duplication of observed FEB flow paths has been achieved for the FEB craters Addams, Isabella, and Cochran. When used as a simple energy‐line model, the model requires low coefficients of friction to extend FEBs to near their observed termini in the synthetic aperture radar (SAR) imagery, although the resulting straight flow lines do not follow the observed flow paths well. For Bingham flow, the model requires low values of viscosity and yield strength which are more similar to pyroclastic or debris flows than basaltic lavas. Flows of 100‐m depth require 1 to 2 orders of magnitude higher values of both viscosity and yield strength than 10‐m‐deep flows. The complicated nature of the flow lines for the low velocity model suggests that FEBs were probably emplaced under variably laminar and turbulent flow conditions, where underlying topography influenced both the direction and energy of flow materials.

Journal of Geophysical Research E: Planets↗
USGS2012

Compositional variations on the Moon: Recalibration of Galileo solid‐state imaging data for the Orientale region and farside

Updated radiometric calibration and systematic processing procedures for Galileo solid‐state imaging (SSI) data from the first (1990) Earth‐Moon encounter are presented. These procedures were applied to a whole‐disk imaging sequence of the Moon centered near Mare Orientale, called Lunmap 14 (L14). Processing of L14 data included radiometric calibration, subpixel coregistration, scattered light removal, geometric control and reprojection, photometric normalization, and calibration to Earth‐based spectra. Coregistration and scattered‐light removal procedures are improvements over the initial calibration of the SSI mosaics. The effects of scattered light correction are best seen using a whole‐Moon view such as L14; resolution of the debated amounts of light scattering from within or outside the camera field of view is not necessary. Scattered light removal particularly affects the 1‐μm spectral region and has implications for interpretation of mafic mineral signatures in mare deposits of the lunar limb and farside. Recalibrated spectra indicate that mare ponds of the limb show moderately deep 1‐μm absorptions, and thus mafic mineral contents, comparable to those of other nearside basalts. Mafic mineral contents of Schiller‐Shickard cryptomaria are higher than previously thought and are similar to some low‐Ti nearside basalts. Many of the recalibrated spectra from South Pole/Aitken are similar to those of Schiller‐Schickard cryptomaria, suggesting that many of these soils represent a mixed mare/highland lithology. The hypothesis that there is an olivine enrichment in southern South Pole/Aitken basin is not supported strongly by spectra shown here.

Journal of Geophysical Research: Planets↗
USGS1996

Along-axis variability in crustal accretion at the Mid-Atlantic Ridge: Results from the OCEAN study

The OCEAN experiment is an integrated geophysical study of a region of the Cape Verde abyssal plain that formed at 140 Ma. Deep seismic reflection and ocean bottom hydrophone (OBH) refraction data were acquired along lines parallel and perpendicular to the paleoridge axis trend identified from a detailed magnetic anomaly survey. The igneous basement is overlain by about 1.3 km of sediment which enables improved imaging of intracrustal structure beyond that possible near the Mid-Atlantic Ridge axis. We describe the results of a 150-km long profile oriented parallel to magnetic anomalies M15 and M16, along which deep seismic reflection data collected by the British Institutions Reflection Profiling Syndicate are complemented by refraction data constrained by four OBHs. The line spans an entire spreading segment between two fracture zones; the northern of which has an offset of 40 km and the other (central) has an offset of only 10 km. Away from the fracture zones, the mean igneous crustal thickness is 7.2 km; near both fracture zones, thinning of up to 4 km is observed, giving a mean igneous crustal thickness over the whole segment of approximately 6.5 km. Differences are seen between the two fracture zones in their seismic velocity structure, in the associated basement topography, and in the presence of a strong reflection extending into the mantle beneath the northern fracture zone. The boundary between oceanic layers 2 and 3 correlates with variably coherent normal incidence reflections and a change in the character of the reflectivity. A number of planar reflections up to 10 km in length are present within the middle and lower crust, dipping outward from beneath low-amplitude basement highs at ∼15°; these appear to be present only within layer 3. The Moho has several expressions in the reflection data, including isolated reflection events, a local increase in reflected amplitudes, and a downward decrease in coherent reflections. At the center of the segment there is a zone at the base of the crust within which both high- and low-velocity materials are present. This zone shows an enhanced level of discontinuous normal incidence reflectivity and may represent an initial fractionation event as melt was emplaced at the spreading ridge.

Journal of Geophysical Research B: Solid Earth↗