Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Geophysical Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70Linked to original sources
USGS2012

Seismic velocity structure and composition of the continental crust: A global view

Seismic techniques provide the highest‐resolution measurements of the structure of the crust and have been conducted on a worldwide basis. We summarize the structure of the continental crust based on the results of seismic refraction profiles and infer crustal composition as a function of depth by comparing these results with high‐pressure laboratory measurements of seismic velocity for a wide range of rocks that are commonly found in the crust. The thickness and velocity structure of the crust are well correlated with tectonic province, with extended crust showing an average thickness of 30.5 km and orogens an average of 46.3 km. Shields and platforms have an average crustal thickness nearly equal to the global average. We have corrected for the nonuniform geographical distribution of seismic refraction profiles by estimating the global area of each major crustal type. The weighted average crustal thickness based on these values is 41.1 km. This value is 10% to 20% greater than previous estimates which underrepresented shields, platforms, and orogens. The average compressional wave velocity of the crust is 6.45 km/s, and the average velocity of the uppermost mantle ( Pn velocity) is 8.09 km/s. We summarize the velocity structure of the crust at 5‐km depth intervals, both in the form of histograms and as an average velocity‐depth curve, and compare these determinations with new measurements of compressional wave velocities and densities of over 3000 igneous and metamorphic rock cores made to confining pressures of 1 GPa. On the basis of petrographic studies and chemical analyses, the rocks have been classified into 29 groups. Average velocities, densities, and standard deviations are presented for each group at 5‐km depth intervals to crustal depths of 50 km along three different geotherms. This allows us to develop a model for the composition of the continental crust. Velocities in the upper continental crust are matched by velocities of a large number of lithologies, including many low‐grade metamorphic rocks and relatively silicic gneisses of amphibolite facies grade. In midcrustal regions, velocity gradients appear to originate from an increase in metamorphic grade, as well as a decrease in silica content. Tonalitic gneiss, granitic gneiss, and amphibolite are abundant midcrustal lithologies. Anisotropy due to preferred mineral orientation is likely to be significant in upper and midcrustal regions. The bulk of the lower continental crust is chemically equivalent to gabbro, with velocities in agreement with laboratory measurements of mafic granulite. Garnet becomes increasingly abundant with depth, and mafic garnet granulite is the dominant rock type immediately above the Mohorovicic discontinuity. Average compressional wave velocities of common crustal rock types show excellent correlations with density. The mean crustal density calculated from our model is 2830 kg/m 3 , and the average SiO 2 content is 61.8%.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Geodetic monitoring of the southern San Andreas Fault, California, 1980-1991

Five geodetic arrays (10 to 40 km aperture) located along the San Andreas fault have been surveyed frequently (several times in most years) over the 1980–1991 interval to detect possible fluctuations in the deformation rate. In each survey of an array the distances between the same four to seven pairs of geodetic monuments were measured. The distances measured (with corresponding standard deviation) range from 8.4 km (3.4 mm) to 38 km (8.2 mm). The data are displayed as plots of measured distance as a function of time. Linear fits in such plots furnish a satisfactory representation of the data. That is, the scatter of the data about the linear fits is within the range expected for the estimated standard deviations in measurement. However, there are coherent low‐amplitude (within the observational error) fluctuations apparent in some of the measured distances. Those fluctuations need not be tectonic effects but rather may be either random patterns or artifacts introduced by systematic drift in instrument calibration or wander of the geodetic monuments. We conclude that the measurements are consistent with steady deformation of the arrays over the 1980–1991 interval, and we find no convincing evidence in the data for fluctuations in the rate of deformation.

California↗
USGS2012

Estimation of rod scale errors in geodetic leveling

Comparisons among repeated geodetic levelings have often been used for detecting and estimating residual rod scale errors in leveled heights. Individual rod-pair scale errors are estimated by a two-step procedure using a model based on either differences in heights, differences in section height differences, or differences in section tilts. It is shown that the estimated rod-pair scale errors derived from each model are identical only when the data are correctly weighted, and the mathematical correlations are accounted for in the model based on heights. Analyses based on simple regressions of changes in height versus height can easily lead to incorrect conclusions. We also show that the statistically estimated scale errors are not a simple function of height, height difference, or tilt. The models are valid only when terrain slope is constant over adjacent pairs of setups (i.e., smoothly varying terrain). In order to discriminate between rod scale errors and vertical displacements due to crustal motion, the individual rod-pairs should be used in more than one leveling, preferably in areas of contrasting tectonic activity. From an analysis of 37 separately calibrated rod-pairs used in 55 levelings in southern California, we found eight statistically significant coefficients that could be reasonably attributed to rod scale errors, only one of which was larger than the expected random error in the applied calibration-based scale correction. However, significant differences with other independent checks indicate that caution should be exercised before accepting these results as evidence of scale error. Further refinements of the technique are clearly needed if the results are to be routinely applied in practice.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Rapid extension recorded by cooling‐age patterns and brittle deformation, Naxos, Greece

The metamorphic core complex exposed as the island of Naxos in the Aegean Sea records an unusually complete sequence of structures developed as a result of continental extension. The structures formed during Miocene rise and cooling from ductile, upper amphibolite facies and anatectic conditions to brittle near‐surface conditions beneath the Naxos detachment fault. Top‐to‐the‐north ductile fabrics in the footwall, which initially developed during amphibolite facies prograde metamorphism, were overprinted by a succession of north directed, normal sense lower‐temperature brittle structures as the footwall was tectonically unloaded and unroofed. Pseudotachylite and cataclasite formation, brittle faulting, alteration, and erosion of the footwall occurred during continued slip and tectonic denudation. Neogene conglomerate and megabreccia, in part derived from exhumation of this footwall, lie structurally above the peripheral Naxos fault. Published K‐Ar and 40 Ar/ 39 Ar ages for hornblende, white mica, and biotite in the footwall decrease northwestward; apparent ages 17–50 Ma in the southeast correspond to areas of low metamorphic grade where preextension argon was partially retained. Published ages 16–10 Ma in higher‐grade rocks of the domal core in the north are cooling ages that for each of the three minerals show a component of younging in the NNE direction of extension. Assuming this is the direction of unroofing, we interpret the rate of this younging as the fault slip rate as the footwall rocks moved >20 km SSW relative to their hanging wall along the base of the Naxos detachment fault. The calculated rates of slip average 5–8 mm/yr, comparable to maximum rates reported in the Basin and Range province.

Naxos↗
USGS2012

Effects of geothermal development on deformation in the Long Valley Caldera, eastern California, 1985-1994

Long Valley caldera in east central California has been the site of crustal unrest in the form of seismicity and ground deformation in response to magmatic inflation since 1980. Uplift of the resurgent dome has totaled ∼0.6 m over the 1975–1992 period. Within this region of uplift, and near the southwestern edge of the resurgent dome, is the Casa Diablo area, which experienced relative subsidence of 0.17 m between 1985 and 1992. Geothermal fluid production began at Casa Diablo in 1985 to supply a binary electric power plant; currently, three such plants generate a total of about 40 MW of electricity. The plants are supplied by 170°C water pumped from depths near 150m; all the produced water is reinjected at cooler temperatures at depths near 600 m. Analyses of data from (1) regional leveling lines and a network of bench marks in the geothermal well field area, (2) tilt observations from an L‐shaped array of bench marks, and (3) calculations relating pressure and temperature changes to subsidence indicate that relative subsidence at Casa Diablo results mainly from reductions in pressure in the shallow production reservoir and overlying formations and reductions in temperature in the underlying injection reservoir. Secondary effects on deformation are caused by offsets along the Taylor‐Bryant fault bounding the west side of the well field.

California↗
USGS1996

Identifying coseismic subsidence in tidal-wetland stratigraphic sequences at the Cascadia subduction zone of western North America

Tidal-wetland stratigraphy reveals that great plate boundary earthquakes have caused hundreds of kilometers of coast to subside at the Cascadia subduction zone. However, determining earthquake recurrence intervals and mapping the coastal extent of past great earthquake ruptures in this region are complicated by the effects of many sedimentologic, hydrographic, and oceanographic processes that occur on the coasts of tectonically passive as well as active continental margins. Tidal-wetland stratigraphy at many Cascadia estuaries differs little from that at similar sites on passive-margin coasts where stratigraphic sequences form through nonseismic processes unrelated to coseismic land level changes. Methods developed through study of similar stratigraphic sequences in Europe provide a framework for investigating the Cascadia estuarine record. Five kinds of criteria must be evaluated when inferring regional coastal subsidence due to great plate boundary earthquakes: the suddenness and amount of submergence, the lateral extent of submerged tidal-wetland soils, the coincidence of submergence with tsunami deposits, and the degree of synchroneity of submergence events at widely spaced sites. Evaluation of such criteria at the Cascadia subduction zone indicates regional coastal subsidence during at least two great earthquakes. Evidence for a coseismic origin remains equivocal, however, for the many peat-mud contacts in Cascadia stratigraphic sequences that lack (1) contrasts in lithology or fossils indicative of more than half a meter of submergence, (2) well-studied tsunami deposits, or (3) precise ages needed for regional correlation. Paleoecologic studies of fossil assemblages are particularly important in estimating the size of sudden sea level changes recorded by abrupt peat-mud contacts and in helping to distinguish erosional and gradually formed contacts from coseismic contacts. Reconstruction of a history of great earthquakes for the Cascadia subduction zone will require rigorous application of the above criteria and many detailed investigations.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Interseismic deformation along the San Andreas Fault in southern California

Eight trilateration networks located along the San Andreas fault in southern California have been surveyed 8 to 19 times within a 14- to 17-year interval between 1971 and 1992. The data, measurements of distances between the same 10 to 32 pairs of geodetic monuments within a network in each of the surveys, have been corrected for coseismic offsets from nearby earthquakes calculated from dislocation models. The corrected data, a total of 2027 measurements, are displayed in the form of plots of measured distance versus time for each of the 167 lines measured. The hypothesis that the interseismic deformation is steady is tested by examining whether deviations from linear fits to the data in the plots are within the range expected for observational error. A significant deviation from steady deformation is found only for the network located neax Palmdale, California. In that network, many of the measurements made in the survey of early 1982 deviate from the trend defined by the measurements in other surveys. The deviations are not of the form (fixed proportional error) one would generally expect from systematic survey error. If the survey of early 1982 is excluded, the remaining data at Palmdale are consistent with steady deformation. Thus the apparent strain event observed near Palmdale in 1982 was transient.

Journal of Geophysical Research↗
USGS2012

Principal component analysis of interseismic deformation in southern California

Eight trilateration networks along the San Andreas fault in southern California have been surveyed repeatedly (8 to 19 times) within an approximately 15-year interval between 1971 and 1992. The data for each network were analyzed by principal component analysis to represent the observed changes in line length as a superposition of individual modes: L ij - L i = ∑ k A ik C k ( t j ), where L ij is the length of the i th line measured at the time t j , L i is the average length of the i th line, and A ik C k ( t j ) is the k th mode. Each mode is described by a common time function Ck(tj) that is evaluated only at the times t j of the surveys, and the participation of each line in that mode is described by a constant amplitude A ik for that line. For all networks the deformation is largely described by the first mode, and the first-mode time function is essentially linear in time. That is, the deformation in each of the networks appears to be steady. Two anomalies in the accumulation of deformation were observed: In the network near Palmdale a transient strain event occurred in the second mode in early 1982, and in the network within Cajon Pass, fluctuations in the accumulation of deformation somewhat greater than would be attributed to measurement error were found. Although both anomalies are formally significant given the estimated measurement error, I am not confident that either anomaly is real. The principal conclusion is that the accumulation of interseismic deformation in the southern California trilateration networks is steady within the precision of measurement.

Journal of Geophysical Research↗
USGS2012

Strain accumulation across the central Nevada seismic zone, 1973–1994

Five trilateration networks extending for 280 km along the central Nevada seismic zone (1915 Pleasant Valley, M = 7.3; 1954 Dixie Valley, M = 6.8; 1954 Stillwater, M = 6.8; 1954 Rainbow Mountain, M = 6.6; 1954 Fairview Peak, M = 7.1; and 1932 Cedar Mountain, M = 7.2) have been surveyed 6 times since 1973 to determine deformation along the zone. Within the precision of measurement the deformation appears uniform along the zone and is described by the principal strain rates 0.036±0.008 μstrain/yr N60°W±3° and −0.031±0.008 μstrain/yr N30°E±3°, extension reckoned positive. The observed strain rates are consistent with simple, right‐lateral, tensor shear at the rate of 0.033 μstrain/yr across a shear zone striking N15°W. This central Nevada shear zone appears to be the northward continuation of the eastern California shear zone. The orientation of the strike‐slip and normal‐slip ruptures within the central Nevada seismic zone are consistent with principal stress axes parallel to the measured principal strain rate axes. Space‐based geodetic measurements (very long baseline interferometry) indicate that the relative motion accommodated across the Basin and Range province west of Ely, Nevada, is about 9.1±1.5 mm/yr N16°W±8° (Dixon et al., 1995.) Notice that the right‐lateral shear zone postulated to explain deformation in the central Nevada seismic zone is properly oriented to accommodate that relative motion. However, a 135‐km effective width of the shear zone would be required to accommodate all of the 9.1 mm/yr relative motion at the strain rates observed in the Nevada seismic zone; only about 3 mm/yr of that relative motion is accommodated within the span of the trilateration networks.

California, Nevada↗
USGS1996

Crustal velocity field near the big bend of California's San Andreas fault

We use geodetic data spanning the 1920–1992 interval to estimate the horizontal velocity field near the big bend segment of California's San Andreas fault (SAF). More specifically, we estimate a horizontal velocity vector for each node of a two-dimensional grid that has a 15-min-by-15-min mesh and that extends between latitudes 34.0°N and 36.0°N and longitudes 117.5°W and 120.5°W. For this estimation process, we apply bilinear interpolation to transfer crustal deformation information from geodetic sites to the grid nodes. The data include over a half century of triangulation measurements, over two decades of repeated electronic distance measurements, a decade of repeated very long baseline interferometry measurements, and several years of Global Positioning System measurements. Magnitudes for our estimated velocity vectors have formal standard errors ranging from 0.7 to 6.8 mm/yr. Our derived velocity field shows that (1) relative motion associated with the SAF exceeds 30 mm/yr and is distributed on the Earth's surface across a band (>100 km wide) that is roughly centered on this fault; (2) when velocities are expressed relative to a fixed North America plate, the motion within our primary study region has a mean orientation of N44°W ± 2° and the surface trace of the SAF is congruent in shape to nearby contours of constant speed yet this trace is oriented between 5° and 10° counterclockwise relative to these contours; and (3) large strain rates (shear rates > 150 nrad/yr and/or areal dilatation rates < −150 nstr/yr) exist near the Garlock fault, near the White Wolf fault, and in the Ventura basin.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Tholeiitic‐alkalic transition at subglacial volcanoes, Tuya region, British Columbia, Canada

Ash Mountain, South Tuya, and Tuya Butte are three small basaltic volcanoes in the Stikine volcanic belt of northern British Columbia. The volcanoes rise 700, 500, and 400 m above their bases and are about 3.2, 1.6, and 2.6 km 3 in volume, respectively. They began eruptive activity under several hundred meters of overlying glacial ice, or water in an ice‐impounded lake, and undegassed pillow lava was erupted and forms the bases of all three. Later, as the vents grew into shallow water, explosive phreatomagmatic activity erupted partly degassed glassy tuffs. Finally, when the volcano emerged through the surface of the ice or water (or the water was drained), degassed subaerial lava flows were erupted and were converted to assemblages of foreset‐bedded pillow breccia and pillow lava when subaerial flows crossed a shoreline and flowed into meltwater lakes. The undegassed subglacial pillow base of Ash Mountain is overlain by partly degassed pillows and hyaloclastite tuff cut by dikes; at South Tuya the pillow base is overlain by hyaloclastite tuffs and lenses of pillow lava; at Tuya Butte the pillow base is overlain by foreset‐bedded pillow lava, pillow breccias, and hyaloclastite tuffs, which in turn are overlain by subaerial lava flows composing a small shield volcano. The undegassed basal subglacial pillow lava of the three volcanoes contain 0.10 ± 0.01 wt % sulfur and ∼0.5 wt % H 2 O. The overlying partly degassed assemblages contain 0.06 ± 0.02% sulfur and ∼0.2% H 2 O at Ash Mountain, 0.07±0.01% sulfur at South Tuya, and 0.03±0.01% sulfur at Tuya Butte. The differences in the degree of degassing can be related to the nature of eruption and quenching and the distance of flow of the subaerial lava. When the volcanoes switched from subglacial to shallow water or subaerial eruptions, as shown by change to more explosive activity and then to subaerial lava flows (and by a marked reduction of sulfur in volcanic glass), the magma shifted from tholeiitic to alkalic composition. This transition occurs at each of the three volcanoes. The tholeiitic and alkalic magmas cannot be related by shallow crystal fractionation and apparently originated by differing degrees of deep melting at a mantle source. Prior to eruption the tholeiitic melts overlay alkalic melts in shallow chambers underlying each of the volcanoes because of their lower density and were, therefore, the first to erupt under subglacial conditions. As the volcano grew through the ice (or ice‐impounded water), the volcanic conduit vented to the atmosphere, producing a partial depressurization of the conduit and the subsurface chamber. This sudden reduction in confining pressure caused enhanced vesiculation of volatile saturated melts, particularly of the more volatile‐rich alkalic melts, causing them to rise to the top of the chamber and erupt.

British Columbia↗
USGS1996

The 1992 M=7 Cape Mendocino, California, earthquake: Coseismic deformation at the south end of the Cascadia megathrust

We invert geodetic measurements of coseismic surface displacements to determine a dislocation model for the April 25, 1992, M = 7 Cape Mendocino, California, earthquake. The orientation of the model slip vector, which nearly parallels North America-Juan de Fuca relative plate convergence, and the location and orientation of the model fault relative to the offshore Cascadia megathrust, suggest that the 1992 Cape Mendocino earthquake is the first well-recorded event to relieve strain associated with the Cascadia subduction zone. We use data from three geodetic techniques: (1) the horizontal and vertical displacements of 13 monuments surveyed with the Global Positioning System, corrected for observed horizontal interseismic strain accumulation, (2) 88 section-elevation differences between leveling monuments, and (3) the uplift of 12 coastal sites observed from the die-off of intertidal marine organisms. Maximum observed displacements are 0.4 m of horizontal movement and 1.5 m of uplift along the coast. We use Monte Carlo techniques to estimate an optimal uniform slip rectangular fault geometry and its uncertainties. The optimal model using all the data resolves 4.9 m of slip on a 14 by 15 km fault that dips 28° SE. The fault extends from 1.5 to 8.7 km in depth and the main-shock hypocenter is close to the downdip projection of the fault. The shallowly dipping fault plane is consistent with the observed aftershock locations, and the estimated geodetic moment is 3.1 × 10 19 N m, 70% of the seismic moment. Other models that exclude leveling data collected in 1935 and 1942 are more consistent with seismological estimates of the fault geometry. If the earthquake is characteristic for this segment, the estimated horizontal slip vector compared with plate convergence rates suggests a recurrence interval of 140 years, with a 95% confidence range of 100–670 years. The coseismic uplift occurred in a region that also has high Quaternary uplift rates determined from marine terrace studies. If repeated ruptures of this southernmost segment of the Cascadia megathrust are responsible for the Quaternary uplift, a comparison of the coseismic uplift with coastal uplift rates suggests a recurrence interval of 200–400 years. Thus comparing horizontal and vertical coseismic to long-term deformation suggests a recurrence interval of about 100–300 years for M = 7 events at the south end of the Cascadia megathrust.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Mapping playa evaporite minerals and associated sediments in Death Valley, California, with multispectral thermal infrared images

Efflorescent salt crusts and associated sediments in Death Valley, California, were studied with remote-sensing data acquired by the NASA thermal infrared multispectral scanner (TIMS). Nine spectral classes that represent a variety of surface materials were distinguished, including several classes that reflect important aspects of the playa groundwater chemistry and hydrology. Evaporite crusts containing abundant thenardite (sodium sulfate) were mapped along the northern and eastern margins of the Cottonball Basin, areas where the inflow waters are rich in sodium. Gypsum (calcium sulfate) crusts were more common in the Badwater Basin, particularly near springs associated with calcic groundwaters along the western basin margin. Evaporite-rich crusts generally marked areas where groundwater is periodically near the surface and thus able to replenish the crusts though capillary evaporation. Detrital silicate minerals were prevalent in other parts of the salt pan where shallow groundwater does not affect the surface composition. The surface features in Death Valley change in response to climatic variations on several different timescales. For example, salt crusts on low-lying mudflats form and redissolve during seasonal-to-interannual cycles of wetting and desiccation. In contrast, recent flooding and erosion of rough-salt surfaces in Death Valley probably reflect increased regional precipitation spanning several decades. Remote-sensing observations of playas can provide a means for monitoring changes in evaporite facies and for better understanding the associated climatic processes. At present, such studies are limited by the availability of suitable airborne scanner data. However, with the launch of the Earth Observing System (EOS) AM-1 Platform in 1998, multispectral visible/near-infrared and thermal infrared remote-sensing data will become globally available.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Equatorial origin for Lower Jurassic radiolarian chert in the Franciscan Complex, San Rafael Mountains, southern California

Lower Jurassic radiolarian chert sampled at two localities in the San Rafael Mountains of southern California (∼20 km north of Santa Barbara) contains four components of remanent magnetization. Components A , B ′, and B are inferred to represent uplift, Miocene volcanism, and subduction/accretion overprint magnetizations, respectively. The fourth component ( C ), isolated between 580° and 680°C, shows a magnetic polarity stratigraphy and is interpreted as a primary magnetization acquired by the chert during, or soon after, deposition. Both sequences are late Pliensbachian to middle Toarcian in age, and an average paleolatitude calculated from all tilt-corrected C components is 1° ± 3° north or south. This result is consistent with deposition of the cherts beneath the equatorial zone of high biologic productivity and is similar to initial paleolatitudes determined for chert blocks in northern California and Mexico. This result supports our model, in which deep-water Franciscan-type cherts were deposited on the Farallon plate as it moved eastward beneath the equatorial productivity high, were accreted to the continental margin at low paleolatitudes, and were subsequently distributed northward by strike-slip faulting associated with movements of the Kula, Farallon, and Pacific plates. Upper Cretaceous turbidites of the Cachuma Formation were sampled at Agua Caliente Canyon to determine a constraining paleolatitude for accretion of the Jurassic chert sequences. These apparently unaltered rocks, however, were found to be completely overprinted by the A component of magnetization. Similar in situ directions and demagnetization behaviors observed in samples of other Upper Cretaceous turbidite sequences in southern and Baja California imply that these rocks might also give unreliable results.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Thermal and unroofing history of a thick, tilted Basin-and-Range crustal section in the Tortilla Mountains, Arizona

We estimate here a geothermal gradient of only 17 ± 5°C km −1 for the tilted Grayback fault block in southeastern Arizona when extension began ∼25 Ma. This gradient is lower than preextension gradients estimated elsewhere in the Basin and Range, is only about 50% of typical gradients in the Basin and Range today, and needs to be accounted for in models of continental extension. The Grayback block exposes a 12-km-thick crustal section of Proterozoic and Cretaceous granitoids, which was tilted 90° during extension between 25 and 15 Ma. Zircon fission-track ages decrease structurally downward (westward) across the block and were all within a zone of partial track annealing prior to tilting and quenching. The zircon age gradient suggests that the 220°–240°C isotherm migrated downward 5–6 km during Paleogene erosion and regional cooling. Apatite fission-track ages decrease westward from ∼83 Ma in the structurally highest crystalline rocks to ∼24 Ma at ∼6-km paleodepth and then to ∼15 Ma another 6 km farther west. Track-length analysis confirms that apatites above the break in slope in age at ∼5.7-km paleodepth resided in a zone of partial annealing prior to tilting, and deeper apatites record rapid cooling upon tilting and unroofing beginning ∼25 Ma. At that time the 110 ± 10°C isotherm determined by the depth at which tracks in apatite were fully erased was at a basement paleodepth of ∼5.7 km, and the 220 ± 30°C isotherm as estimated from zircon data resided at a pretilting basement depth of ∼12.15 km. From consistent values of paleogeothermal gradient for two depth intervals we estimate the pretilt gradient was 17 ± 5°C km −1 . From 25 to 15 Ma the rotating Grayback block cooled rapidly as higher, westward moving blocks unroofed it tectonically at a rate of ∼1 km m.y. −1 .

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Gravity field over the Sea of Galilee: Evidence for a composite basin along a transform fault

The Sea of Galilee (Lake Kinneret) is located at the northern portion of the Kinneret-Bet Shean basin, in the northern Dead Sea transform. Three hundred kilometers of continuous marine gravity data were collected in the lake and integrated with land gravity data to a distance of more than 20 km around the lake. Analyses of the gravity data resulted in a free-air anomaly map, a variable density Bouguer anomaly map, and a horizontal first derivative map of the Bouguer anomaly. These maps, together with gravity models of profiles across the lake and the area south of it, were used to infer the geometry of the basins in this region and the main faults of the transform system. The Sea of Galilee can be divided into two units. The southern half is a pull-apart that extends to the Kinarot Valley, south of the lake, whereas the northern half was formed by rotational opening and transverse normal faults. The deepest part of the basinal area is located well south of the deepest bathymetric depression. This implies that the northeastern part of the lake, where the bathymetry is the deepest, is a young feature that is actively subsiding now. The pull-apart basin is almost symmetrical in the southern part of the lake and in the Kinarot Valley south of the lake. This suggests that the basin here is bounded by strike-slip faults on both sides. The eastern boundary fault extends to the northern part of the lake, while the western fault does not cross the northern part. The main factor controlling the structural complexity of this area is the interaction of the Dead Sea transform with a subperpendicular fault system and rotated blocks.

Sea of Galilee↗
USGS1996

Three-dimensional P and S wave velocity structure of Redoubt Volcano, Alaska

The three‐dimensional P and S wave structure of Redoubt Volcano, Alaska, and the underlying crust to depths of 7–8 km is determined from 6219 P wave and 4008 S wave first‐arrival times recorded by a 30‐station seismograph network deployed on and around the volcano. First‐arrival times are calculated using a finite‐difference technique, which allows for flexible parameterization of the slowness model and easy inclusion of topography and source‐receiver geometry. The three‐dimensional P wave velocity structure and hypocenters are determined simultaneously, while the three‐dimensional S wave velocity model is determined using the relocated seismicity and an initial S wave velocity model derived from the P wave velocity model assuming an average Vp / Vs ratio of 1.78. Convergence is steady with approximately 73% and 52% reduction in P and S wave arrival time RMS, respectively, after 10 iterations. The most prominent feature observed in the three‐dimensional velocity models derived for both P and S waves is a relative low‐velocity, near‐vertical, pipelike structure approximately 1 km in diameter that extends from 1 to 6 km beneath sea level. This feature aligns axially with the bulk of seismicity and is interpreted as a highly fractured and altered zone encompassing a magma conduit. The velocity structure beneath the north flank of the volcano between depths of 1 and 6 km is characterized by large lateral velocity variations. High velocities within this region are interpreted as remnant dikes and sills and low velocities as regions along which magma migrates. No large low‐velocity body suggestive of a magma chamber is resolved in the upper 7–8 km of the crust.

Journal of Geophysical Research B: Solid Earth↗