Search USGS⌕ Search

SEARCH · Search USGS

Results for “Facies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70Linked to original sources

The chrono- and lithostratigraphic significance of the type section of the Middendorf Formation, Chesterfield County, South Carolina

The name Middendorf Formation has been widely used in the Coastal Plain of South Carolina, eastern Georgia, and southern North Carolina since 1904, despite conflicting interpretations of the age and stratigraphic relations of the unit at its type locality. Between 1995 and 1998, the U.S. Geological Survey, in cooperation with the South Carolina Department of Natural Resources, drilled three continuously cored holes to the south and to the east of the type section of the Middendorf Formation, which is located in Chesterfield County, South Carolina. In addition, two outcrops to the northeast of the type section were sampled for biostratigraphic control. The litho- and biostratigraphic relations of the units in these cores and outcrops provide significant insights into the age of the Middendorf Formation at its type locality, and how this age impacts regional correlations of the formation. A projection of formational contacts and thicknesses from downdip areas into the type locality of the Middendorf Formation indicates that the type section is most likely a facies of either the uppermost Bladen Formation (of the Black Creek Group), or the uppermost Bladen and the lowermost part of the Peedee Formations. This report documents the evidence that support this interpretation. The implication of this interpretation is that the name "Middendorf" has been applied to a variety of units throughout the southeastern United States, all of which display a similar lithology, but differ significantly in stratigraphic position and age. For these reasons, we recommend that the name Middendorf be restricted for use with strata that occur only in the vicinity of the type locality, and use of the name "Middendorf" for units elsewhere in the Coastal Plain be reconsidered.

Southeastern Geology↗

Petrography and character of the bedrock surface beneath western Cape Cod, Massachusetts

Cores collected during recent drilling in western Cape Cod, Massachusetts provide insight into the topography and petrology of the underlying bedrock. 62 drill sites spread over a ???140 km2 study area produced cores of granitoids (31), orthogneisses (20), basalts/diabases (4), amphibolites (3), felsic mylonites (2), and dolomitic rock (2). Granitoid cores range in composition from granite to tonalite to quartz diorite, but are dominated by single-mica granites. Alteration is common in nearly all cores examined in this study, and is evidenced by the secondary growth of chlorite and epidote. The granitoids resemble rocks of the Dedham and Fall River terranes (Wones and Goldsmith 1991). Gneisses from the study area generally contain the mineral assemblage hornblende+plagioclase+quartz+biotite+epidote??chlorite?? sphene??K-feldspar??sericite+oxides. Based on mineral assemblages, we estimate peak metamorphic grade to be of lower amphibolite facies. X-ray powder diffraction of unmetamorphosed dolomitic cores shows presence of layered silicates (clays), plagioclase, and possible magnesite. Contours of the bedrock surface show locally irregular topography suggesting erosion by glacial scour. The distribution of lithologies suggests a possible continuation of the New Bedford gneissic terrane that outcrops 25 km to the west. Dolomitic rocks may represent a lithified fault gouge material at the eastern edge of the gneissic zone. Basalts/diabases are interpreted to be post-metamorphic dikes of Late Paleozoic age, or possibly associated with Mesozoic rifting.

Massachussets↗

Sequence stratigraphy of the Kingak Shale (Jurassic-Lower Cretaceous), National Petroleum Reserve in Alaska

Beaufortian strata (Jurassic-Lower Cretaceous) in the National Petroleum Reserve in Alaska (NPRA) are a focus of exploration since the 1994 discovery of the nearby Alpine oil field (>400 MMBO). These strata include the Kingak Shale, a succession of depositional sequences influenced by rift opening of the Arctic Ocean Basin. Interpretation of sequence stratigraphy and depositional facies from a regional two-dimensional seismic grid and well data allows the definition of four sequence sets that each displays unique stratal geometries and thickness trends across NPRA. A Lower to Middle Jurassic sequence set includes numerous transgressive-regressive sequences that collectively built a clastic shelf in north-central NPRA. Along the south-facing, lobate shelf margin, condensed shales in transgressive systems tracts downlap and coalesce into a basinal condensed section that is likely an important hydrocarbon source rock. An Oxfordian-Kimmeridgian sequence set, deposited during pulses of uplift on the Barrow arch, includes multiple transgressive-regressive sequences that locally contain well-winnowed, shoreface sandstones at the base of transgressive systems tracts. These shoreface sandstones and overlying shales, deposited during maximum flooding, form stratigraphic traps that are the main objective of exploration in the Alpine play in NPRA. A Valanginian sequence set includes at least two transgressive-regressive sequences that display relatively distal characteristics, suggesting high relative sea level. An important exception is the presence of a basal transgressive systems tract that locally contains shoreface sandstones of reservoir quality. A Hauterivian sequence set includes two transgressive-regressive sequences that constitute a shelf-margin wedge developed as the result of tectonic uplift along the Barrow arch during rift opening of the Arctic Ocean Basin. This sequence set displays stratal geometries suggesting incision and synsedimentary collapse of the shelf margin.

Alaska↗

1-D/3-D geologic model of the Western Canada Sedimentary Basin

The 3-D geologic model of the Western Canada Sedimentary Basin comprises 18 stacked intervals from the base of the Devonian Woodbend Group and age equivalent formations to ground surface; it includes an estimated thickness of eroded sediments based on 1-D burial history reconstructions for 33 wells across the study area. Each interval for the construction of the 3-D model was chosen on the basis of whether it is primarily composed of petroleum system elements of reservoir, hydrocarbon source, seal, overburden, or underburden strata, as well as the quality and areal distribution of well and other data. Preliminary results of the modeling support the following interpretations. Long-distance migration of hydrocarbons east of the Rocky Mountains is indicated by oil and gas accumulations in areas within which source rocks are thermally immature for oil and (or) gas. Petroleum systems in the basin are segmented by the northeast-trending Sweetgrass Arch; hydrocarbons west of the arch were from source rocks lying near or beneath the Rocky Mountains, whereas oil and gas east of the arch were sourced from the Williston Basin. Hydrocarbon generation and migration are primarily due to increased burial associated with the Laramide Orogeny. Hydrocarbon sources and migration were also influenced by the Lower Cretaceous sub-Mannville unconformity. In the Peace River Arch area of northern Alberta, Jurassic and older formations exhibit high-angle truncations against the unconformity. Potential Paleozoic though Mesozoic hydrocarbon source rocks are in contact with overlying Mannville Group reservoir facies. In contrast, in Saskatchewan and southern Alberta the contacts are parallel to sub-parallel, with the result that hydrocarbon source rocks are separated from the Mannville Group by seal-forming strata within the Jurassic. Vertical and lateral movement of hydrocarbons along the faults in the Rocky Mountains deformed belt probably also resulted in mixing of oil and gas from numerous source rocks in Alberta.

Mountain Geologist↗

Geology of the Carnegie museum dinosaur quarry site of Diplodocus carnegii, Sheep Creek, Wyoming

The holotype of Diplodocus carnegii Hatcher, 1901, consists of a partial skeleton (CM 84) that was recovered, along with a second partial skeleton of the same species (CM 94), from the upper 10 m of the Talking Rock facies of the Brushy Basin Member of the Morrison Formation exposed along Bone Quarry Draw, a tributary of Sheep Creek in Albany County, Wyoming. A composite measured section of the stratigraphic interval exposed adjacent to the quarry indicates that the Brushy Basin Member in this area is a stacked succession of lithofacies consisting of hackly, greenish gray, calcareous mudstone and greenish brown, dense, fine-grained limestone. The more erosion resistant limestone layers can be traced over many hundreds of meters. Thus, these strata do not appear to represent a highly localized deposit such as a stream channel, oxbow lake, or backwater pond. The Sheep Creek succession is interpreted as representing a clastic-dominated lake where high turbidity and sediment influx produced deposition of calcareous mudstone. During drier periods the lake's turbidity decreased and limestone and dolomite precipitation replaced mud deposition. Microkarsting at the top of some limestone/ dolomite layers suggests subaerial deposition may have prevailed during these dry episodes. The quarry of D. carnegii was excavated within the top strata of one of the numerous intervals of hackly, greenish gray, calcareous mudstone that represent an ephemeral freshwater lake. The quarry strata are directly overlain by 0.3 m of dolomite-capped limestone that was deposited shortly after interment of D. carnegii in the lake mudstones. The close vertical proximity of the overlying limestone to the skeleton's stratigraphic: level suggests that the animal's carcass may have been buried beneath the drying lake deposits during a period of decreased rainfall.

Annals of Carnegie Museum↗

Pore morphology effect in microlog for porosity prediction in a mature field

In an matured field, developed during the 1950s, no porosity logs were available from sources other than invaded zone resistivity Rxo . The microresistivity porosity is calibrated with the core porosity to yield an accurate estimate of the porosity. However, the procedure of calibrating the porosity with Rxo for a linear regression model may not be predictive without an understanding of the pore types in the reservoir interval. A thorough investigation of the pore types, based on the lithofacies description obtained from the core analysis, and its role in obtaining a good estimate of porosity is demonstrated in the Ogallah field. Therefore, the objective of this paper is to separate the porosity-microlog data into pore-type based zones with characteristic cementation exponents (m) in this multi-petrotype reservoir with a complex mixture of Arbuckle dolomite and sandstone rock. The value of m is critical in making estimates of water saturation. "Rule of thumb" values of cementation might lead to errors in water saturation on either the optimistic or the pessimistic side. The rock types in the Ogallah contain interparticle/intercrystalline, vugs and fractures distributed through the rock-facies, which influence the values of cementation factor. We use the modern typed well to shed light on the Archie's equation parameter values. Rock fabric numbers and flow zone indices have been identified for classification of dolomite and sandstone, respectively. The analysis brings out characteristic cementation factors for distinct pore types in the Arbuckle rock. The porosity predictions The analysis results also compliment the petrofacies delineation using LDA in this complicated rock layout as a quality control of the statistical application. The comparison between the predicted and core porosities shows a significant improvement over using a single m value for carbonates and sandstones which will lead to improved description of a matured field. Copyright 2011, Society of Petroleum Engineers.

Conference Paper↗

Hierarchy of sedimentary discontinuity surfaces and condensed beds from the middle Paleozoic of eastern North America: Implications for cratonic sequence stratigraphy

Sedimentological analyses of middle Paleozoic epeiric sea successions in North America suggest a hierarchy of discontinuity surfaces and condensed beds of increasing complexity. Simple firmgrounds and hardgrounds, which are comparatively ephemeral features, form the base of the hierarchy. Composite hardgrounds, reworked concretions, authigenic mineral crusts and monomictic intraformational conglomerates indicate more complex histories. Polymictic intraformational conglomerates, ironstones and phosphorites form the most complex discontinuity surfaces and condensed beds. Complexity of discontinuities is closely linked to depositional environments duration of sediment starvation and degree of reworking which in turn show a relationship to stratigraphic cyclicity. A model of cratonic sequence stratigraphy is generated by combining data on the complexity and lateral distribution of discontinuities in the context of facies successions. Lowstand, early transgressive and late transgressive systems tracts are representative of sea-level rise. Early and late transgressive systems tracts are separated by the maximum starvation surface (typically a polymictic intraformational conglomerate or condensed phosphorite), deposited during the peak rate of sea-level rise. Conversely the maximum flooding surface, representing the highest stand of sea level, is marked by little to no break in sedimentation. The highstand and falling stage systems tracts are deposited during relative sea-level fall. They are separated by the forced-regression surface, a thin discontinuity surface or condensed bed developed during the most rapid rate of sea-level fall. The lowest stand of sea level is marked by the sequence boundary. In subaerially exposed areas it is occasionally modified as a rockground or composite hardground.

Conference Paper↗

Sequence stratigraphic control on prolific HC reservoir development, Southwest Iran

An important carbonate formation in the Persian Gulf and the onshore oil fields of Southwest Iran is the Lowermost Cretaceous Fahliyan formation. The formation in Darkhowain field consists of unconformity-bounded depositional sequences containing prolific hydrocarbon reservoirs of contrasting origin. Located in the high stand systems tract (HST) of the lower sequence encompassing over 200m of oil column are the most prolific reservoir. Another reservoir is over 80m thick consisting of shallowing-upward cycles that are best developed within the transgressive systems tract of the upper sequence. Vertical facies distribution and their paleobathymetry and geophysical log signatures of the Fahliyan formation in the Darkhowain platform reveal the presence of two unconformity-bounded depositional sequences in Vail et al., Van Wagoner et al., and Sarg. The Fahliyan formation mainly consists of platform carbonates composed of restricted bioclastic lime mudstone to packstone of the platform interior, Lithocodium boundstone or ooid-intraclast-bioclast grainstone of the high energy platform margin and the bioclast packstone to lime mudstone related to the off-platform setting.

Oil & Gas Journal↗

High resolution shallow geologic characterization of a late Pleistocene eolian environment using ground penetrating radar and optically stimulated luminescence techniques: North Carolina, USA

Geophysical surveys, sedimentology, and optically-stimulated luminescence age analyses were used to assess the geologic development of a coastal system near Swansboro, NC. This area is a significant Woodland Period Native American habitation and is designated the "Broad Reach" archaeological site. 2-d and 3-d subsurface geophysical surveys were performed using a ground penetrating radar system to define the stratigraphic framework and depositional facies. Sediment samples were collected and analyzed for grain-size to determine depositional environments. Samples were acquired and analyzed using optically stimulated luminescence techniques to derive the depositional age of the various features. The data support a low eolian to shallow subtidal coastal depositional setting for this area. Li-DAR data reveal ridge and swale topography, most likely related to beach ridges, and eolian features including low-relief, low-angle transverse and parabolic dunes, blowouts, and a low-relief eolian sand sheet. Geophysical data reveal dominantly seaward dipping units, and low-angle mounded features. Sedimentological data reveal mostly moderately-well to well-sorted fine-grained symmetrical to coarse skewed sands, suggesting initial aqueous transport and deposition, followed by eolian reworking and bioturbation. OSL data indicate initial coastal deposition prior to ca. 45,000 yBP, followed by eolian reworking and low dune stabilization at ca. 13,000 to 11,500 yBP, and again at ca. 10,000 yBP (during, and slightly after the Younger Dryas chronozone).

Southeastern Geology↗

Anadarko Basin conodont studies

Preliminary analysis of early Paleozoic conodonts from the subsurface within and adjacent to the Anadarko basin demonstrates their utility in stratigraphic and thermal evolution studies in the basin. More than 100 samples from 30 drill holes produced conodonts that can be correlated with faunas known from rock sequences exposed along the southern flanks of the basin. For the Middle Ordovician to Devonian, extant biozonations and/or recent published literature based on Oklahoma surface sections allow good biostratigraphic correlation into the subsurface and often allow testing of physical correlations. In contrast, conodonts from the Arbuckle Group (Lower to Middle Ordovician) are less well known. Faunas from the upper half of the group are documented only in unpublished theses, and published faunas are in need of restudy and revision. However, this limited information, along with work in progress in Oklahoma and data from carbonate platform facies elsewhere in North America, still permit correlations into the subsurface with the promise of increasingly improved resolution.

Oklahoma↗

Geologic model for the assessment of undiscovered hydrocarbons in Lower to Upper Cretaceous carbonate rocks of the Fredericksburg and Washita groups, U.S. Gulf Coast Region

As part of the assessment of undiscovered oil and gas resources in Jurassic and Cretaceous strata of the U.S. Gulf Coast in 2010, the U.S. Geological Survey assessed carbonate rocks of the Fredericksburg and Washita groups and their equivalent units underlying onshore lands and State waters. One conventional assessment unit extending from south Texas to the Florida panhandle was defined: the Fredericksburg-Buda Carbonate Platform-Reef Gas and Oil assessment unit. Assessed strata range in age from Early Cretaceous Albian to Late Cretaceous Cenomanian. The assessment was based on a geologic model that incorporated the Upper Jurassic–Cretaceous–Tertiary Composite Total Petroleum System of the Gulf of Mexico Basin. The following factors were evaluated to define the assessment unit and estimate undiscovered oil and gas resources: potential source rocks, hydrocarbon migration, reservoir porosity and permeability, traps and seals, structural features, depositional framework, and potential for water washing of hydrocarbons near outcrop areas. Analysis of the production history of discovered reservoirs and well data within the assessment unit was also essential for estimating the numbers and sizes of undiscovered oil and gas reservoirs within the assessment unit. The downdip boundary of the assessment unit was drawn as an arbitrary line 10 miles downdip of the Lower Cretaceous shelf margin, to include potential reef-talus reservoirs, a facies described in the geologic model developed for the assessment. Updip boundaries of the assessment unit were drawn based on the updip extent of assessment unit carbonate reservoir rocks, basin margin fault zones, and (or) the presence of producing wells within the assessed interval. Using the U.S. Geological Survey methodology, mean undiscovered resources of 40 million barrels of oil, 622 billion cubic feet of gas, and 14 million barrels of natural gas liquids were estimated for the assessment unit.

U.S. Gulf Coast↗

Application of aerial gamma-ray spectrometric and magnetic surveys in geologic mapping: a case study in southern Virginia and northern North Carolina

Aerial gamma-ray spectrometric and magnetic survey maps are valuable aids for geologic mapping where rocks are poorly exposed in south-central Virginia and northernmost North Carolina. Broad low areas on the potassium and thorium gamma-ray survey maps distinguish the Carolina, Spring Hope, and Roanoke Rapids terranes from more highly radiogenic areas of the Raleigh and Triplet terranes, reflecting differences in the compositions of residual soils. Granitic rocks are delineated most clearly by potassium highs and less clearly by thorium highs. Nearly all the thorium highs other than those related to granites are associated with amphibolite-facies rocks of the Raleigh and Triplet terranes. Contrasting thorium lows within these terranes help to distinguish the individual rock units. In the Carolina and Roanoke Rapids terranes, high-gradient magnetic patterns delineate stratified metavolcanic and metasedimentary units that are not discernible from the gamma-ray surveys. Circular magnetic highs coincide with gabbro plutons, and numerous magnetic lineaments correspond to Jurassic diabase dikes. Magnetically uniform, low-gradient areas coincide with less mafic plutons. A magnetic lineament (high) coincides with the Nutbush Creek fault zone, and other faults are distinguished as boundaries between zones of contrasting geophysical properties. The gamma-ray spectrometric and magnetic survey maps most effectively indicate geologic features in the region if they are employed collectively, and if they are interpreted in concert with simultaneous geologic field investigations.

North Carolina;Virginia↗

ChemCam results from the Shaler Outcrop in Gale Crater, Mars

The "Shaler" outcrop in Gale crater is approximately 0.7 m thick and >20 m long, and exhibits multiple well-exposed platy and cross-stratified facies [1] interpreted to be primarily fluvial sandstone deposits. The outcrop is a part of the upper Glenelg member in the Yellowknife Bay (YKB) stratigraphic section [2]. Curiosity first encountered the "Shaler" outcrop on sol 121 of the mission, and returned to the outcrop on sols 309- 324. The rugged nature of the outcrop and short time available for analysis limited opportunities for contact science, but ChemCam’s ability to remotely collect compositional and textural observations resulted in a large data set from Shaler. ChemCam conducted analyses of 29 non-soil targets at Shaler, 26 of which used laser-induced breakdown spectroscopy (LIBS) for a total of 9,180 spectra. Three observations used only the remote micro-imager (RMI). Each of the 26 LIBS targets were analyzed at between 5 and 25 points, providing a measure of the target homogeneity and in some cases transecting fine strata.

Conference Paper↗

Mapping contact metamorphic aureoles in Extremadura, Spain, using Landsat thematic mapper images

In the Extremadura region of western Spain, Ag, Pb, Zn, and Sn deposits occur in the pieces of late Hercynian granitic plutons and near the pluton contacts in late Proterozoic slate and metagraywacke that have been regionally metamorphosed to the green schist facies. The plutons generally are well exposed and have distinctive geomorphological expression and vegetation; poor exposures of the metasedimentary host rocks and extensive cultivation, however, make delineation of the contact aureoles difficult. Landsat Thematic Mapper (TM) images have been used to distinguish soil developed on the contact metamorphic rocks from soil formed on the stratigraphically equivalent slate-metagraywacke sequence. The mineral constituents of these soils are similar, except that muscovite is more common in the contact metamorphic soil; carbonaceous material is common in both soils. Contact metamorphic soil have lower reflectance, especially in the 1.6-micrometers wavelength region (TM 5), and weaker Al-OH, Mg-OH, and Fe 3+ absorption features than do spectra of the slate-metagraywacke soil. The low-reflectance and subdued absorption features exhibited by the contact metamorphic soil spectra are attributed to the high absorption coefficient f the carbonaceous material caused by heating during emplacement of the granitic plutons. These spectral differences are evident in a TM 4/3, 4/5, 3/1 color-composite image. Initially, this image was used to outline the contact aureoles, but digital classification of the TM data was necessary for generating internally consistent maps of the distribution of the exposed contact metamorphic soil. In an August 1984, TM scene of the Caceras area, the plowed, vegetation-free fields were identified by their low TM 4/3 values. Then, ranges of TM 4/5 and 3/1 values were determine for selected plower fields within and outside the contact aureoles; TM 5 produced results similar to TM 4/5. Field evaluation, supported by X-ray diffraction and petrographic studies, confirmed the presence of more extensive aureoles than shown in published geologic maps; few misclassified areas were noted. Additional plowed fields consisting of exposed contact metamorphic soil were mapped digitally in an August 1985 TM scene. Subsequently, this approach was used to map two 1-km-wide linear zones of contact metamorphosed rock and oil in the San Nicolas-Sn-W Mine area, which is located approximated 125 km southeast of the Caceras study area. Exposures of granite in the San Nicolas area are limited to a few unaltered granitic dikes in the mine and a small exposure of unaltered pegmatite-bearing granite in a quarry about 1.5 km west of the mine. The present of coarsely crystalline biotite and beryl in the granite in the quarry and of contact metamorphosed slate up to 2.5 km from the nearest granite exposure suggest that only the apical part of a pluton is exposed in the quarry and that a larger, shallowly buried body is probably present. These results indicate that potential application of TM image analysis to mineral exploration in lithologically similar areas that are cultivated in spite of poor rock exposures.

Extremadura↗

Reconnaissance geochronology of tuffs in the Miocene Barstow Formation: implications for basin evolution and tectonics in the central Mojave Desert

Early to middle Miocene lacustrine strata of the Barstow Formation are well dated in just a few places, limiting our ability to infer basin evolution and regional tectonics. At the type section in the Mud Hills, previous studies have shown that the lacustrine interval of the Barstow Formation is between ~16.3 Ma and ~13.4 Ma. Elsewhere, lake beds of the Barstow Formation have yielded vertebrate fossils showing the Hemingfordian/Bartovian transition at ~16 Ma but are otherwise poorly dated. In an attempt to clarify the age and depositional environments of the lake deposits, we are mapping the Barstow Formation and dating zircons from interbedded tuffs, as well as testing ash-flow tuffs for the distinctive remanent magnetization direction of the widespread Peach Spring Tuff. Thus far, our new U-Pb zircon ages inficate that the Barstow lake beds contain tuff beds as old as 19.1 Ma and as young as 15.3 Ma. At Harvard Hill, Barstow lake beds contain a thick tuff dated at 18.7 Ma. On the basis of zircon ages, mineralogy, zircon chemistry, and paleomagnetic results, we consider the thick tuff to be a lacustrine facies of the Peach Spring Tuff. We have identified the Peach Spring Tuff by similar methods at eight localities over a broad area, providing a timeline for several fluvial and lacustrine sections. The new dates indicate that long-lived lacustrine systems originated before 19 Ma and persisted to at least 15 Ma. The onset of lacustrine conditions predates the Peach Spring Tuff in most Barstow Formation sections and may be older than 19.5 Ma in some places. The new data indicate that the central Mojave Desert contained narrow to broad lake basins during and after extension, and that Barstow lacustrine deposits did not exclusively postdate extensional tectonics. At present, it is unclear whether several separate, small lake basins coexisted during the early to middle Miocene, or if instead several small early Miocene basins gradually coalesced over about 6 millions years to form one or two large middle Miocene lake basins.

Mojave Desert↗

Multichannel seismic depth sections and interval velocities over outer continental shelf and upper continental slope between Cape Hatteras and Cape Cod: Rifted margins

Six computer-generated seismic depth sections over the outer continental shelf and upper slope reveal that subhorizontal Lower Cretaceous reflectors continue 20 to 30 km seaward of the present shelf edge. Extensive erosion on the continental slope has occurred primarily during the Tertiary, causing major unconformities and retreat of the shelf edge to its present position. The precise age and number of erosional events is not established, but at least one major erosional event is thought to be Oligocene and related to a marine regression in response to a worldwide eustatic lowering of sea level. Velocities derived from the multichannel data reveal distinctive ranges and lateral trends as functions of sediment age, depth of burial, and distance from the coastline. Seismic units beneath the shelf and slope of inferred Tertiary age range from 1.7 to 2.7 km/sec, increasing with age and depth of burial. Units interpreted as Upper Cretaceous rocks beneath the shelf range from 2.3 to 3.6 km/sec and show a distinct lateral increase across the shelf followed by a decrease beneath the present continental slope. Inferred Lower Cretaceous and Upper Jurassic rocks beneath the shelf increase from 3.7 to 4.8 km/sec from nearshore to offshore and indicate a change in facies from clastic units below the inner shelf to carbonate units beneath the outer shelf and upper continental slope. Both reflection and refraction data suggest that thin, high-velocity limestone units (5.0 km/sec) are present within the Lower Cretaceous and Upper Jurassic units beneath the outermost shelf edge, but that these change lithology or pinch out before reaching the middle shelf. Although lateral changes in velocity across the shelf and local velocity inversions appear, the interval velocities along the length of the margin show excellent continuity between Cape Hatteras and Cape Cod. The high-velocity horizons within the Lower Cretaceous and Upper Jurassic shelf-edge complex indicate the presence of a carbonate bank or reef. The continental shelf off New Jersey is underlain by a trough approximately 150 km wide with up to 12 km of sedimentary fill. The oceanic basement beneath the upper continental rise is usually at a depth of 10 to 11 km and is overlain by 6 to 8 km of sediments. The rise sediment trough is separated from the shelf trough by an acoustic basement ridge 25 to 75 km wide where penetration never exceeds 6 km beneath sea level, although faulting and carbonate bank or reef complexes frequently limit penetration to 3 to 4 km in this zone. The acoustic basement ridge coincides with the East Coast Magnetic Anomaly and is interpreted as thick oceanic crust formed during the initial phase of seafloor spreading between North America and Africa. Rapid differential subsidence occurred on opposite sides of the basement ridge during the Jurassic and Early Cretaceous. Differential subsidence beneath the shelf also occurred along the margins, with narrower and shallower shelf troughs occurring off platform areas such as Cape Cod and Cape Hatteras.

Cape Cod, Cape Hatteras↗

Geology of the offshore Southeast Georgia Embayment, U.S. Atlantic continental margin, based on multichannel seismic reflection profiles

A geologic interpretation of the offshore Southeast Georgia Embayment is based on an 1,100-km multichannel seismic reflection survey conducted jointly by the University of Texas Marine Science Institute and the U.S. Geological Survey. The Southeast Georgia Embayment consists of a wedge of Cretaceous and Cenozoic sedimentary rocks that thins from 5 to 8 km beneath the Blake Plateau to about 1 km over the Cape Fear Arch. North of about 31°N lat. the sedimentary section onlaps a regional unconformity characterized by a strong, smooth reflector/high-velocity refractor (5.8 to 6.3 km/sec). Rocks below the unconformity may consist of Lower Jurassic volcanic(?) rocks, crystalline basement, or a high-velocity sedimentary layer. Acoustic basement south of 31°N lat. is an i regular unconformable surface that probably truncates a varied lithology consisting of Paleozoic (and Precambrian?) igneous, metamorphic, and sedimentary rocks or Triassic to Early Jurassic igneous and sedimentary rocks in fault basins, all of which crop out or have been drilled onshore. The sedimentary section is divided into three major seismic intervals. The intervals are separated by unconformities and can be mapped regionally. The oldest interval ranges in age from Early Cretaceous through middle Late Cretaceous, although it may contain Jurassic rocks where it thickens beneath the Blake Plateau. It probably consists of continental to nearshore clastic rocks where it onlaps basement and grades seaward to a restricted carbonate platform facies (dolomite-evaporite). The middle interval (Upper Cretaceous) is characterized by prograding clinoforms interpreted as open marine slope deposits. This interval represents a Late Cretaceous shift of the carbonate shelf margin from the Blake Escarpment shoreward to about its present location, probably due to a combination of co tinued subsidence, an overall Late Cretaceous rise in sea level, and strong currents across the Blake Plateau. The youngest (Cenozoic) interval represents a continued seaward progradation of the continental shelf and slope. Cenozoic sedimentation on the Blake Plateau was much abbreviated owing mainly to strong currents.

Southeast Georgia Embayment↗