Search USGS⌕ Search

SEARCH · Search USGS

Results for “Water Science and Application”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources
USGS2019

Reach-scale monitoring and modeling of rivers--Expanding hydraulic data collection beyond the cross section

For over 125 years, the U.S. Geological Survey streamgage network has provided important hydrologic information about rivers and streams throughout the Nation. Traditional streamgage methods provide reliable stage and streamflow data but typically only monitor stage at a single location in a river and require frequent calibration streamflow measurements. Direct measurements are not always feasible, therefore improved sensors and methods are being deployed at gages to better document streamflow conditions between measurements. The technology and techniques of reach-scale monitoring allow the U.S. Geological Survey to collect more data across the full range of streamflow without requiring that a hydrographer be present. The U.S. Geological Survey Arizona Water Science Center’s reach-scale monitoring program will enhance the Arizona streamgage network with more accurate streamflow measurements and provide more extensive streamflow records and geomorphological datasets for our agency partners and the public. Reach-scale monitoring installations and techniques are applicable to streams of the western United States and likely throughout the Nation.

Arizona↗
USGS2012

Sound data management as a foundation for natural resources management and science

Effective decision making is closely related to the quality and completeness of available data and information. Data management helps to ensure data quality in any discipline and supports decision making. Managing data as a long-term scientific asset helps to ensure that data will be usable beyond the original intended application. Emerging issues in water-resources management and climate variability require the ability to analyze change in the conditions of natural resources over time. The availability of quality, well-managed, and documented data from the past and present helps support this requirement.

Fact Sheet↗
USGS2005

Assessing ecological integrity of Ozark rivers to determine suitability for protective status

Preservation of extraordinary natural resources, protection of water quality, and restoration of impaired waters require a strategy to identify and protect least-disturbed streams and rivers. We applied two objective, quantitative methods to determine stream ecological integrity of headwater reaches of 10 Ozark rivers, 5 with Wild and Scenic River federal protective status. Thirty-four variables representing macroinvertebrate and fish assemblage characteristics, in-stream habitat, riparian vegetation, water quality, and watershed attributes were quantified for each river and analyzed using two multivariate approaches. The first approach, cluster and discriminant analyses, identified two groups of river with only one variable (% forested watershed) reliably distinguishing groups. Our second approach employed ordinal scaling to compare variables for each river to conceptually ideal conditions that were developed as a composite of optimal attributes among the 10 rivers. The composite distance of each river from ideal was then calculated using a unidimensional ranking technique. Two rivers without Wild and Scenic River designation ranked highest relative to ideal (highest ecological integrity), and two others, also without designation, ranked most distant from ideal (lowest ecological integrity). Fish density, number of intolerant fish species, and invertebrate density were influential biotic variables for scaling. Contributing physical variables included riparian forest cover, water nitrate concentration, water turbidity, percentage of forested watershed, percentage of private land ownership, and road density. These methods provide a framework for refinement and application in other regions to facilitate the process of establishing least-disturbed reference conditions and identifying rivers for protection and restoration. ?? 2005 Springer Science+Business Media, Inc.

Environmental Management↗
USGS2016

Topobathymetric elevation model development using a new methodology: Coastal National Elevation Database

During the coming decades, coastlines will respond to widely predicted sea-level rise, storm surge, and coastalinundation flooding from disastrous events. Because physical processes in coastal environments are controlled by the geomorphology of over-the-land topography and underwater bathymetry, many applications of geospatial data in coastal environments require detailed knowledge of the near-shore topography and bathymetry. In this paper, an updated methodology used by the U.S. Geological Survey Coastal National Elevation Database (CoNED) Applications Project is presented for developing coastal topobathymetric elevation models (TBDEMs) from multiple topographic data sources with adjacent intertidal topobathymetric and offshore bathymetric sources to generate seamlessly integrated TBDEMs. This repeatable, updatable, and logically consistent methodology assimilates topographic data (land elevation) and bathymetry (water depth) into a seamless coastal elevation model. Within the overarching framework, vertical datum transformations are standardized in a workflow that interweaves spatially consistent interpolation (gridding) techniques with a land/water boundary mask delineation approach. Output gridded raster TBDEMs are stacked into a file storage system of mosaic datasets within an Esri ArcGIS geodatabase for efficient updating while maintaining current and updated spatially referenced metadata. Topobathymetric data provide a required seamless elevation product for several science application studies, such as shoreline delineation, coastal inundation mapping, sediment-transport, sea-level rise, storm surge models, and tsunami impact assessment. These detailed coastal elevation data are critical to depict regions prone to climate change impacts and are essential to planners and managers responsible for mitigating the associated risks and costs to both human communities and ecosystems. The CoNED methodology approach has been used to construct integrated TBDEM models in Mobile Bay, the northern Gulf of Mexico, San Francisco Bay, the Hurricane Sandy region, and southern California.

Journal of Coastal Research↗
USGS2022

Weakly supervised spatial deep learning for Earth image segmentation based on imperfect polyline labels

In recent years, deep learning has achieved tremendous success in image segmentation for computer vision applications. The performance of these models heavily relies on the availability of large-scale high-quality training labels (e.g., PASCAL VOC 2012). Unfortunately, such large-scale high-quality training data are often unavailable in many real-world spatial or spatiotemporal problems in earth science and remote sensing (e.g., mapping the nationwide river streams for water resource management). Although extensive efforts have been made to reduce the reliance on labeled data (e.g., semi-supervised or unsupervised learning, few-shot learning), the complex nature of geographic data such as spatial heterogeneity still requires sufficient training labels when transferring a pre-trained model from one region to another. On the other hand, it is often much easier to collect lower-quality training labels with imperfect alignment with earth imagery pixels (e.g., through interpreting coarse imagery by non-expert volunteers). However, directly training a deep neural network on imperfect labels with geometric annotation errors could significantly impact model performance. Existing research that overcomes imperfect training labels either focuses on errors in label class semantics or characterizes label location errors at the pixel level. These methods do not fully incorporate the geometric properties of label location errors in the vector representation. To fill the gap, this article proposes a weakly supervised learning framework to simultaneously update deep learning model parameters and infer hidden true vector label locations. Specifically, we model label location errors in the vector representation to partially reserve geometric properties (e.g., spatial contiguity within line segments). Evaluations on real-world datasets in the National Hydrography Dataset (NHD) refinement application illustrate that the proposed framework outperforms baseline methods in classification accuracy.

ACM Transactions on Intelligent Systems and Techno↗
USGS2026

On-demand global Landsat evapotranspiration product: Development, evaluation, and dissemination

Global actual evapotranspiration (ET) is one of the essential climate variables needed to understand and manage the relationships among food, energy, and water resources. The U.S. Geological Survey Earth Resources Observation and Science (EROS) Center launched a provisional ET product in 2020, offering on-demand, field-scale global coverage derived from Landsat data through the EROS Science Processing Architecture (ESPA) platform. The ESPA interface provides ET data for cloud-free Landsat overpasses starting in 1982 with Landsat 4 through the current Landsat 9. The ET data are delivered as a Provisional Level-3 Science product created using the Operational Simplified Surface Energy Balance (SSEBop) model. Landsat surface temperature and reference ET are the main model drivers along with vegetation index and net radiation for model parameterization. A large volume of Landsat-based ET orders (e.g., over 1,200,000 images from June 2020 through December 2025) around the world indicate increasing awareness and application of the ET data. The ESPA platform enables land and water resource managers and researchers to access a first-order ET product without requiring advanced knowledge of remote sensing technology or evapotranspiration modeling. We present the methodology and workflow of the on-demand Landsat ET product and its performance evaluations over diverse hydro-climatic settings. The product can help estimate field-scale consumptive water use and thus quickly and consistently assess historical water use, allocation, and budget to inform water management under changing environments. Future ET data aggregated to monthly and seasonal time scales are expected to enhance integration with decision-making tools and procedures.

Remote Sensing of Environment↗
USGS2003

Pore space analysis of NAPL distribution in sand-clay media

This paper introduces a conceptual model of clays and non-aqueous phase liquids (NAPLs) at the pore scale that has been developed from a mathematical unit cell model, and direct micromodel observation and measurement of clay-containing porous media. The mathematical model uses a unit cell concept with uniform spherical grains for simulating the sand in the sand-clay matrix (???10% clay). Micromodels made with glass slides and including different clay-containing porous media were used to investigate the two clays (kaolinite and montmorillonite) and NAPL distribution within the pore space. The results were used to understand the distribution of NAPL advancing into initially saturated sand and sand-clay media, and provided a detailed analysis of the pore-scale geometry, pore size distribution, NAPL entry pressures, and the effect of clay on this geometry. Interesting NAPL saturation profiles were observed as a result of the complexity of the pore space geometry with the different packing angles and the presence of clays. The unit cell approach has applications for enhancing the mechanistic understanding and conceptualization, both visually and mathematically, of pore-scale processes such as NAPL and clay distribution. ?? 2003 Elsevier Science Ltd. All rights reserved.

Advances in Water Resources↗
USGS2011

Proceedings of the third USGS modeling conference, June 7-11, 2010, Broomfield, Colorado-Understanding and predicting for a changing world

The Third USGS Modeling Conference was held June 7th-11, 2010, in Broomfield, Colorado. The conference focused on the development and application of analytical and theoretical models and data availability that support managing the Nation's resources and help protect lives and property. Participants at the conference included scientists and managers from Department of the Interior (DOI) Bureaus; national and international Federal, State, and local agencies; academic institutions; and nongovernmental organizations. The conference was organized according to DOI priorities and the strategic directions of the USGS Science Strategy; the following themes were emphasized: (1) Understanding Ecosystems and Restoring America's Treasured Landscapes; (2) Climate Change and Impact; (3) New Energy Frontier and Minerals for America; (4) A National Hazards, Risk, and Resilience Assessment Program; (5) Role of Environment and Wildlife in Human Health; (6) A Water Census of the United States; and (7) New Methods of Investigation and Discovery. The conference theme-"Understanding and Predicting for a Changing World"-focused on the following goals: advance development and application of models; provide tools that address management issues; present state-of-the-art models ranging from individual phenomena to integrated systems; and foster a working community among scientists and managers.

Scientific Investigations Report↗
USGS2018

A comparison of synthetic flowpaths derived from light detection and ranging topobathymetric data and National Hydrography Dataset High Resolution Flowlines

Bathymetric and topobathymetric light detection and ranging (lidar) digital elevation models created for the Delaware River were provided to the National Geospatial Program and used to evaluate synthetic flowpath extraction from bathymetric/topobathymetric lidar survey data as a data source for improving the density, distribution, and connectivity of the National Hydrography Dataset High Resolution Flowline Network. As the surface-water component of The National Map, the National Hydrography Dataset maintains the Nation’s drainage network flow information and geometries for surface-water features used in hydrologic, hydraulic, and other science and engineering disciplines. The regional lidar survey for the Delaware River between Hancock, New York, and Trenton, New Jersey, was collected for the U.S. Geological Survey using the Experimental Advanced Airborne Research Lidar sensor system and processed by the Coastal National Elevation Database Applications Program. Using 1 percent of the maximum flow accumulation value for the surveyed Delaware River corridor as the flow accumulation threshold for grid cells at 1-, 5-, and 10-meter resolution created 223 to 283 kilometers of synthetic flowpaths potentially representing the river channel thalweg, which is the deepest point in a riverbed cross-section. There was potential for improving the High Resolution National Hydrography Dataset (HR NHD) Flowline network in places where the Delaware River channel, depicted as an Artificial Path in the HR NHD, is offset from the extracted synthetic river flowpath which sometimes appeared better positioned than the Artificial Path to represent the river thalweg. For the same area, using 0.05 percent of the maximum flow accumulation at the 1-, 5-, and 10-meter resolutions extracted 744 to 1,317 kilometers of synthetic flowpaths, with extracted synthetic flowpaths representing the main river channel and additional synthetic flowpaths representing tributaries or streams adjacent to the main channel. Overlaying these results with the HR NHDFlowline Network indicates that some of the additional synthetic flowpaths are connected to or extend HR NHD stream/river feature types. Some disconnected or isolated synthetic flowpaths not included in stream/river feature types were validated in orthoimagery and U.S. Topo Maps and provide examples of how extracted synthetic flowpaths could be used to delineate new stream/river features. Other additional extracted synthetic flowpaths depict linear features such as canals, tree lines, roads, or linear topographic depressions. For some river reaches where obstructions to flow or where low-relief topographic or bathymetric surfaces alter the flow direction, the software tool used to develop the flow direction grid did not calculate a primary flowpath for the river channel. Based on the results of this analysis, site conditions for the Delaware River corridor did not affect the quality of lidar bathymetric survey data. However, depending on the resolution of the lidar bathymetric digital elevation models (BDEMs), site conditions do have different effects on results for extracted synthetic flowpaths. We found that synthetic flowpaths extracted from 1-meter resolution lidar DEMs had more varied flow directions around in-channel landforms that obstructed flow than synthetic flowpaths extracted from 5- or 10-meter resolution lidar DEMs. As a result the 1-meter resolution DEM created some isolated or discontinuous synthetic flowpath segments where the 5- and 10-meter DEMs developed more continuous flowpaths. In this case the river bed upstream from the in-channel obstruction is shallower than the river bed downstream. Under these conditions the 1-meter resolution DEM provided synthetic flowpaths delineating a potential river thalweg. In this same area, the software solution modified (virtually raised) the river bed in the 5- and 10-meter resolution DEMs and flattened the bathymetric surface to create a continuous downstream flow direction, which caused trellis-patterned synthetic flowpaths to form. Under different site conditions and converse to the above development of synthetic flowpaths at different resolutions, at an abandoned river flood plain (terrace) with low relief that is adjacent to the river channel, the flow direction grid for the 1-meter resolution DEM developed continuous synthetic flowpath corresponding to a HR NHD Flowline network stream/river feature that connected to the main river channel but the larger resolution DEMs created isolated or disconnected synthetic flowpaths. A project to continue an evaluation of benefits of or issues caused by extracting synthetic flowpaths to enhance the HR NHD could include a study to assess the potential for merging surface-water flowpaths extracted from lidar topobathymetry and 3D Elevation Program digital elevation models. The merged DEM approach to synthetic flowpath extraction could extend the HR NHDFlowline network and enhance flow accumulations that might develop better flow direction grids in low-relief areas. Because of the confined lateral extent of the Delaware River, the lidar DEMs were not used to create catchments or watersheds; however, the merged DEM approach could also be tested as a resource for enhancing HR NHD catchments and watersheds. This lidar DEM synthetic flowpath extraction project supports the National Geospatial Program efforts to collect and produce high-quality lidar data to provide 3-dimensional representations of natural feature and aligns with the National Spatial Data Infrastructure to improve utilization of geospatial data. The results also can be useful for understanding strategies that can help maintain quality data in the HR NHD programs. KEYWORDS: bathymetric, digital elevation model, extracted synthetic flowpath, lidar, High Resolution National Hydrography Dataset, topobathymetric

New Jersey↗
USGS2023

Application of the technology readiness levels framework to natural resource management tools

Technology advancements in fisheries science can provide useful tools to support natural resource management and conservation. However, new technologies may also present challenges for decision makers due to the lack of a standardized process to assess technologies for consideration within management plans. Future technology development in fishery and water resources could benefit from a framework that assigns an appropriate technology development stage and defines the readiness for implementation. Technology Readiness Levels (TRL) are one established research and development scale used throughout engineering and related disciplines that could be applied to natural resource management tools. The TRL assess the maturity of a technology from nascent idea through a fully developed technology. Steps within this scale could provide a general framework for researchers to follow when planning and conducting studies, while similarly providing a standard scale for resource managers to assess readiness for technology transfer and implementation. The goal of this paper is to describe TRL in the context of natural resource management tools and offer this existing framework as one option to facilitate communication between researchers and managers.

Fisheries↗
USGS1961

Synopsis of geologic and hydrologic results: Chapter A in Geological Survey research 1961

The Geological Survey is engaged in many different kinds of investigations in the fields of geology and hydrology. These investigations may be grouped into several broad, inter-related categories as follows: (a) Economic geology, including engineering geology (b) Regional geologic mapping, including detailed mapping and stratigraphic studies (c) Resource and topical studies (d) Ground-water studies (e) Surface-water studies (f) Quality-of-water studies (g) Field and laboratory research on geologic and hydrologic processes and principles. The Geological Survey also carries on investigations in its fields of competence for other Federal agencies that do not have the required specialized staffs or scientific facilities. Nearly all the Geological Survey's activities yield new data and principles of value in the development or application of the geologic and hydrologic sciences. The purpose of this report, which consists of 4 chapters, is to present as promptly as possible findings that have come to the fore during the fiscal year 1961 the 12 months ending June 30, 1961. The present volume, chapter A, is a synopsis of the highlights of recent findings of scientific and economic interest. Some of these findings have been published or placed on open file during the year; some are presented in chapters B, C, and D; still others have not been published previously. Only part of the scientific and economic results developed during the year can be presented in this synopsis. Readers who wish more complete or more detailed information should consult the bibliography of reports beginning on page A-156 of this volume, and the collection of short articles presented in the companion chapters as follows: Prof. Paper 424-B Articles 1 to 146 Prof. Paper 424-C Articles 147 to 292 Prof. Paper 424-D Articles 293 to 435 A list of investigations in progress in the Geologic and Water Resources Divisions with the names and addresses of the project leaders is given on pages A-110 to A-155 for those interested in work in progress in various areas or on special topics. During the fiscal year 1961, the services of the Geologic and Water Resources Divisions were utilized, or supported financially in part, by the many Federal and State agencies listed on pages A-106 to A-109. The Geological Survey has also cooperated from time to time with other agencies, and some of the work described in these chapters stems from work of previous years in cooperation with agencies not shown on the list. All cooperating agencies are identified where appropriate in the individual short articles in chapters B, C, and D, and they are mentioned in connection with some of the larger programs summarized in chapter A; because of space limitations, however, their contributions are mentioned in many of the short summary paragraphs contained in chapter A.

Professional Paper↗
USGS1958

Selected topics of fluid mechanics

The fundamental equations of fluid mechanics are specific expressions of the principles of motion which are ascribed to Isaac Newton. Thus, the equations which form the framework of applied fluid mechanics or hydraulics are, in addition to the equation of continuity, the Newtonian equations of energy and momentum. These basic relationships are also the foundations of river hydraulics. The fundamental equations are developed in this report with sufficient rigor to support critical examinations of their applicability to most problems met by hydraulic engineers of the Water Resources Division of the United States Geological Survey. Physical concepts are emphasized, and mathematical procedures are the simplest consistent with the specific requirements of the derivations. In lieu of numerical examples, analogies, and alternative procedures, this treatment stresses a brief methodical exposition of the essential principles. An important objective of this report is to prepare the user to read the literature of the science. Thus, it begins With a basic vocabulary of technical symbols, terms, and concepts. Throughout, emphasis is placed on the language of modern fluid mechanics as it pertains to hydraulic engineering. The basic differential and integral equations of simple fluid motion are derived, and these equations are, in turn, used to describe the essential characteristics of hydrostatics and piezometry. The one-dimensional equations of continuity and motion are defined and are used to derive the general discharge equation. The flow net is described as a means of demonstrating significant characteristics of two-dimensional irrotational flow patterns. A typical flow net is examined in detail. The influence of fluid viscosity is described as an obstacle to the derivation of general, integral equations of motion. It is observed that the part played by viscosity is one which is usually dependent on experimental evaluation. It follows that the dimensionless ratios known as the Euler, Froude, Reynolds, Weber, and Cauchy numbers are defined as essential tools for interpreting and using experimental data. The derivations of the energy and momentum equations are treated in detail. One-dimensional equations for steady nonuniform flow are developed, and the restrictions applicable to the equations are emphasized. Conditions of uniform and gradually varied flow are discussed, and the origin of the Chezy equation is examined in relation to both the energy and the momentum equations. The inadequacy of all uniform-flow equations as a means of describing gradually varied flow is explained. Thus, one of the definitive problems of river hydraulics is analyzed in the light of present knowledge. This report is the outgrowth of a series of short schools conducted during the spring and summer of 1953 for engineers of the Surface Water Branch, Water Resources Division, U. S. Geological Survey. The topics considered are essentially the same as the topics selected for inclusion in the schools. However, in order that they might serve better as a guide and outline for informal study, the arrangement of the writer's original lecture notes has been considerably altered. The purpose of the report, like the purpose of the schools which inspired it, is to build a simple but strong framework of the fundamentals of fluid mechanics. It is believed that this framework is capable of supporting a detailed analysis of most of the practical problems met by the engineers of the Geological Survey. It is hoped that the least accomplishment of this work will be to inspire the reader with the confidence and desire to read more of the recent and current technical literature of modern fluid mechanics.

Water Supply Paper↗
USGS2024

Side-scan sonar as a tool for measuring fish populations: Current state of the science and future directions

Side-scan sonar (SSS) is a powerful tool that can be used to address many key questions in fisheries science. In principle, SSS uses dual transducers to transmit a narrow-beam, wide-angle acoustic signal as the survey vessel transits an area. The intensity of reflected sound is recorded to generate an image mosaic comprised of benthic substrates and targets in the water column, including organisms such as fish. Although SSS has been around for decades, recent advancements have opened new opportunities to leverage this technology to directly measure fish populations. In this paper, we review the current state of the science and identify opportunities to further refine SSS for fisheries applications.

Fisheries↗
USGS1983

Land resource information needs of county government : a case study in Larimer County, Colorado

My two colleagues on the study team, Rex Burns of the Larimer County Planning Department, and Glenn McCarty of the Fort Collins office of the Soil Conservation Service, contributed substantially to this report; many of their written words have found their way directly into the text. Jill O'Gara later replaced Rex Burns as the Larimer County coordinator in the study's final stages. John Rold, Colorado State Geologist, assisted in coordinating our efforts at the beginning of this study. Lou Campbell, State Cartographer, gave valuable advice and assistance throughout the effort. Wallace Hansen and James Blakey of the USGS Geologic and Water Resources Divisions, respectively, read the final manuscript and helped in many other ways. Joanna Trolinger served as research assistant and manuscript typist. Many others in the USGS, SCS, and other organizations helped in supplying information and advice. Tom Bates, then Chairman of the USGS Central Region Earth Science Applications Task Force, was the originator of the study, leader of the USGS participation effort, and guiding inspiration throughout. The study was carried out in association with the Program on Environment and Behavior, Institute of Behavioral Science, University of Colorado, Boulder.

Open-File Report↗
USGS2022

Modeling risk dynamics of contaminants of emerging concern in a temperate-region wastewater effluent-dominated stream

Wastewater effluent-dominated streams are becoming increasingly common worldwide, including in temperate regions, with potential impacts on ecological systems and drinking water sources. We recently quantified the occurrence/spatiotemporal dynamics of pharmaceutical mixtures in a representative temperate-region wastewater effluent-dominated stream (Muddy Creek, Iowa) under baseflow conditions and characterized relevant fate processes. Herein, we quantified the ecological risk quotients (RQs) of 19 effluent-derived contaminants of emerging concern (CECs; including: 14 pharmaceuticals, 2 industrial chemicals, and 3 neonicotinoid insecticides) and 1 run-off-derived compound (atrazine) in the stream under baseflow conditions, and estimated the probabilistic risks of effluent-derived CECs under all-flow conditions ( i.e. , including runoff events) using stochastic risk modeling. We determined that 11 out of 20 CECs pose medium-to-high risks to local ecological systems ( i.e. , algae, invertebrates, fish) based on literature-derived acute effects under measured baseflow conditions. Stochastic risk modeling indicated decreased, but still problematic, risk of effluent-derived CECs ( i.e. , RQ ≥ 0.1) under all-flow conditions when runoff events were included. Dilution of effluent-derived chemicals from storm flows thus only minimally decreased risk to aquatic biota in the effluent-dominated stream. We also modeled in-stream transport. Thirteen out of 14 pharmaceuticals persisted along the stream reach (median attenuation rate constant k < 0.1 h −1 ) and entered the Iowa River at elevated concentrations. Predicted and measured concentrations in the drinking water treatment plant were below the human health benchmarks. This study demonstrates the application of probabilistic risk assessments for effluent-derived CECs in a representative effluent-dominated stream under variable flow conditions (when measurements are less practical) and provides an enhanced prediction tool transferable to other effluent-dominated systems.

Iowa↗
USGS2012

In situ optical water-quality sensor networks - Workshop summary report

Advanced in situ optical water-quality sensors and new techniques for data analysis hold enormous promise for furthering scientific understanding of aquatic systems. These sensors measure important biogeochemical parameters for long deployments, enabling the capture of data at time scales over which they vary most meaningfully. The high-frequency, real-time water-quality data they generate provide opportunities for early warning of water-quality deterioration, trend detection, and science-based decision support. However, developing networks of optical sensors in freshwater systems that report reliable and comparable data across and between sites remains a challenge to the research and monitoring community. To address this, the U. S. Geological Survey (USGS) and the Consortium of Universities for the Advancement of Hydrologic Science, Inc. (CUAHSI) convened a joint 3-day workshop (June 8-10, 2011) at the National Conservation Training Center in Shepardstown, West Virginia, to explore ways to coordinate development of standards and applications for optical sensors, and improve handling, storing, and analyzing the continuous data they produce. The workshop brought together more than 60 scientists, program managers, and vendors from universities, government agencies, and the private sector. Several important outcomes emerged from the presentations and breakout sessions. There was general consensus that making intercalibrated measurements requires that both manufacturers and users better characterize and calibrate the sensors under field conditions. For example, the influence of suspended particles, highly colored water, and temperature on optical sensors remains poorly understood, but consistently accounting for these factors is critical to successful deployment and for interpreting results in different settings. This, in turn, highlights the lack of appropriate standards for sensor calibrations, field checks, and characterizing interferences, as well as methods for data validation, treatment, and analysis of resulting measurements. Participants discussed a wide range of logistical considerations for successful sensor deployments, including key physical infrastructure, data loggers, and remote-communication techniques. Tools to manage, assure, and control quality, and explore large streams of continuous water-quality data are being developed by the USGS, CUAHSI, and other organizations, and will be critical to making full use of these highfrequency data for research and monitoring.

Open-File Report↗
USGS2010

Saltcedar and Russian Olive Control Demonstration Act Science Assessment

The primary intent of this document is to provide the science assessment called for under The Saltcedar and Russian Olive Control Demonstration Act of 2006 (Public Law 109-320; the Act). A secondary purpose is to provide a common background for applicants for prospective demonstration projects, should funds be appropriated for this second phase of the Act. This document synthesizes the state-of-the-science on the following topics: the distribution and abundance (extent) of saltcedar (Tamarix spp.) and Russian olive (Elaeagnus angustifolia) in the Western United States, potential for water savings associated with controlling saltcedar and Russian olive and the associated restoration of occupied sites, considerations related to wildlife use of saltcedar and Russian olive habitat or restored habitats, methods to control saltcedar and Russian olive, possible utilization of dead biomass following removal of saltcedar and Russian olive, and approaches and challenges associated with revegetation or restoration following control efforts. A concluding chapter discusses possible long-term management strategies, needs for additional study, potentially useful field demonstration projects, and a planning process for on-the-ground projects involving removal of saltcedar and Russian olive.

Scientific Investigations Report↗
USGS2010

Saltcedar and Russian olive control demonstration act science assessment [Executive summary]

The primary intent of this document is to provide the science assessment called for under The Saltcedar and Russian Olive Control Demonstration Act of 2006 (Public Law 109–320; the Act). A secondary purpose is to provide a common background for applicants for prospective demonstration projects, should funds be appropriated for this second phase of the Act. This document synthesizes the state-of-the-science on the following topics: the distribution and abundance (extent) of saltcedar (Tamarix spp.) and Russian olive (Elaeagnus angustifolia) in the Western United States, potential for water savings associated with controlling saltcedar and Russian olive and the associated restoration of occupied sites, considerations related to wildlife use of saltcedar and Russian olive habitat or restored habitats, methods to control saltcedar and Russian olive, possible utilization of dead biomass following removal of saltcedar and Russian olive, and approaches and challenges associated with revegetation or restoration following control efforts. A concluding chapter discusses possible long-term management strategies, needs for additional study, potentially useful field demonstration projects, and a planning process for on-the-ground projects involving removal of saltcedar and Russian olive. The principal findings and conclusions from each of these chapters are summarized below.

Book chapter↗