SEARCH · Search USGS
Results for “Washington Geology”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Hydrogeology of the unconsolidated sediments, water quality, and ground-water/surface-water exchanges in the Methow River Basin, Okanogan County, Washington
The U.S. Geological Survey, in cooperation with Okanogan County, investigated the hydrogeology of the unconsolidated sedimentary deposits in the Methow River Basin, the quality of surface and ground waters, and the exchanges between ground water and surface water. Alluvium (Qa) and glaciofluvial sediments (Qga) deposited during the Quaternary period constitute the primary aquifer in the Methow River Basin, which is used as a source of water for domestic and public-water supplies and for maintaining streamflow during seasonal dry periods. The sediments form a nearly continuous unit along the valley bottom from above the Lost River to the confluence of the Methow and Columbia Rivers, covering more than 45 square miles of the basin?s surface. There are no distinct units within the deposit that can be identified across or along the valley except for fragments of a possible lake bed near the town of Twisp. Ground-water levels in the unconsolidated aquifer are highest during the summer and lowest in the winter and early spring. Ground water and surface water, sampled during June and September 2001, generally were of high quality. Only two samples from domestic and municipal wells indicated the possibility of ground-water contamination from nitrate and arsenic concentrations. In both cases, potential contamination was isolated to an individual well. No trends in water quality were apparent when comparing the results of this investigation with previous studies. The flow of water between rivers and aquifers is important for regulating the availability of water resources for in-stream and out-of-stream uses in the Methow River Basin. Ground-water discharge from the unconsolidated aquifer to the Methow River from Lost River to Pateros ranged from an estimated 153,000 acre-ft in water year 2001 to 157,000 acre-ft in water year 2002. In contrast, ground-water discharge to the lower Twisp River from Newby Creek to near Twisp ranged from 4,700 acre-ft in water year 2001 to 9,200 acre-ft in water year 2002. The Methow and Twisp Rivers, among others in the basin, are major sources of recharge for the unconsolidated aquifer, particularly during high-flow periods in May and June. Aquifer recharge by both rivers increased with streamflow in water year 2002 compared to water year 2001 as indicated by daily losses of streamflow. Aquifer recharge by the Methow River from Lost River to Pateros was estimated to be 82,000 acre-ft in water year 2001 and 137,000 acre-ft in water year 2002. Aquifer recharge by the Twisp River from Newby Creek to near Twisp was estimated to be 2,000 acre-ft in water year 2001 and 6,400 acre-ft in water year 2002. Seepage from unlined irrigation canals also recharges the unconsolidated aquifer during the late spring and summer and may contribute as much 38,000 acre-ft annually to aquifer recharge in the basin. Some portion of this ground water returns to rivers as indicated by a seasonal increase in ground-water discharge in the Methow River from Winthrop to Twisp and in the lower Twisp River during late summer and early autumn. Although the increase is likely due primarily to irrigation canal seepage, however, fluvial recharge during the summer also may have contributed to the increase. The increased rate of ground-water discharge decays by January in both reaches.
Database for the geologic map of upper Eocene to Holocene volcanic and related rocks in the Cascade Range, Washington
This geospatial database for a geologic map of the Cascades Range in Washington state is one of a series of maps that shows Cascade Range geology by fitting published and unpublished mapping into a province-wide scheme of lithostratigraphic units. Geologic maps of the Eocene to Holocene Cascade Range in California and Oregon complete the series, providing a comprehensive geologic map of the entire Cascade Range that incorporates modern field studies and that has a unified and internally consistent explanantion. The complete series will be useful for regional studies of volcanic hazards, volcanology, and tectonics. Originally a project supported by the Geothermal Research Program of the U.S. Geological Survey, the maps emphasize Quaternary volcanic rocks, because large igneous-related hydrothermal systems that have high temperatures are associated with Quaternary volcanic fields. Rocks older than a few million years are also included on the maps as they help to unravel geologic puzzles of the present-day Cascade Range. The deeply eroded older volcanoes found in the Western Cascades physiographic subprovince are analogues of today's snow-covered shield volcanoes and stratovolcanoes. The fossil hydrothermal systems of the Eocene to Pliocene vents now exposed provide clues to processes active today beneath the Pleistocene and Holocene volcanic peaks along the present-day crest of the Cascade Range. Study of these older rocks can aid in developing models of geothermal systems. These rocks also give insight into the origins of volcanic-hosted mineral deposits and even to future volcanic hazards. This digital database contains information used to produce the geologic map published as Sheet 1 in U.S. Geological Survey Miscellaneous Investigations Series Map I-2005. (Sheet 2 of Map I-2005 shows sources of geologic data used in the compilation and is available separately). Sheet 1 of Map I-2005 shows the distribution and relations of volcanic and related rock units in the Cascade Range of Washington at a scale of 1:500,000. This digital release is produced from stable materials originally compiled at 1:250,000 scale that were used to publish Sheet 1. The database therefore contains more detailed geologic information than is portrayed on Sheet 1. This is most noticeable in the database as expanded polygons of surficial units and the presence of additional strands of concealed faults. No stable compilation materials exist for Sheet 1 at 1:500,000 scale. The main component of this digital release is a spatial database prepared using geographic information systems (GIS) applications. This release also contains links to files to view or print the map sheet, main report text, and accompanying mapping reference sheet from Map I-2005. For more information on volcanoes in the Cascade Range in Washington, Oregon, or California, please refer to the U.S. Geological Survey Volcano Hazards Program website.
Geologic assessment of undiscovered gas resources of the Eastern Oregon and Washington Province
The purpose of the U.S. Geological Survey's (USGS) National Oil and Gas Assessment is to develop geology-based hypotheses regarding the potential for additions to oil and gas reserves in priority areas of the United States, focusing on the distribution, quantity, and availability of oil and natural gas resources. The USGS has completed an assessment of the undiscovered oil and gas potential of the Eastern Oregon and Washington Province of Oregon and Washington (USGS Province 5005). The province is a priority Energy Policy and Conservation Act (EPCA) province for the National Assessment because of its potential for oil and gas resources. The assessment of this province is based on geologic principles and uses the total petroleum system concept. The geologic elements of a total petroleum system include hydrocarbon source rocks (source rock maturation, hydrocarbon generation and migration), reservoir rocks (stratigraphy, sedimentology, petrophysical properties), and hydrocarbon traps (trap formation and timing). In the Eastern Oregon and Washington Province, the USGS used this geologic framework to define one total petroleum system and two assessment units within the total petroleum system, and quantitatively estimated the undiscovered gas resources within each assessment unit.
Geologic map of the Chewelah 30' x 60' Quadrangle, Washington and Idaho
This data set maps and describes the geology of the Chewelah 30' X 60' quadrangle, Washington and Idaho. Created using Environmental Systems Research Institute's ARC/INFO software, the data base consists of the following items: (1) a map coverage containing geologic contacts and units, (2) a point coverage containing site-specific geologic structural data, (3) two coverages derived from 1:100,000 Digital Line Graphs (DLG); one of which represents topographic data, and the other, cultural data, (4) two line coverages that contain cross-section lines and unit-label leaders, respectively, and (5) attribute tables for geologic units (polygons), contacts (arcs), and site-specific data (points). In addition, the data set includes the following graphic and text products: (1) A PostScript graphic plot-file containing the geologic map, topography, cultural data, and two cross sections, and on a separate sheet, a Correlation of Map Units (CMU) diagram, an abbreviated Description of Map Units (DMU), modal diagrams for granitic rocks, an index map, a regional geologic and structure map, and a key for point and line symbols; (2) PDF files of the Readme text-file and expanded Description of Map Units (DMU), and (3) this metadata file. The geologic map database contains original U.S. Geological Survey data generated by detailed field observation and by interpretation of aerial photographs. The map was compiled from geologic maps of eight 1:48,000 15' quadrangle blocks, each of which was made by mosaicing and reducing the four constituent 7.5' quadrangles. These 15' quadrangle blocks were mapped chiefly at 1:24,000 scale, but the detail of the mapping was governed by the intention that it was to be compiled at 1:48,000 scale. The compilation at 1:100,000 scale entailed necessary simplification in some areas and combining of some geologic units. Overall, however, despite a greater than two times reduction in scale, most geologic detail found on the 1:48,000 maps is retained on the 1:100,000 map. Geologic contacts across boundaries of the eight constituent quadrangles required minor adjustments, but none significant at the final 1:100,000 scale. The geologic map was compiled on a base-stable cronoflex copy of the Chewelah 30' X 60' topographic base and then scribed. The scribe guide was used to make a 0.007 mil-thick blackline clear-film, which was scanned at 1200 DPI by Optronics Specialty Company, Northridge, California. This image was converted to vector and polygon GIS layers and minimally attributed by Optronics Specialty Company. Minor hand-digitized additions were made at the USGS. Lines, points, and polygons were subsequently edited at the USGS by using standard ARC/INFO commands. Digitizing and editing artifacts significant enough to display at a scale of 1:100,000 were corrected. Within the database, geologic contacts are represented as lines (arcs), geologic units as polygons, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum.
Geologic map of the Maud quadrangle, Nelson and Washington Counties, Kentucky
Explore the source record for details and available documents.
Topographic and geologic maps of manganese deposits in California
Geologic and topographic maps of several manganese properties in California were released today by the Geological Survey according to an announcement made by Survey Director W. E. Wrather to Secretary of the Interior Harold L. Ickes. The maps have been placed on open file at the offices of the Geological Survey in Washington, D. C., and at the offices of the Geologic Branch, California Division of Mines, Ferry Building, San Francisco, where they may be consulted by persons directly interested in the properties. The recently increased demand for information regarding deposits of manganese silicates for new uses in connection with the war effort has indicated the desirability of releasing unpublished detailed maps of the California deposits, many of which carry manganese silicates. The maps were made as part of the strategic minerals investigations of the Geological Survey from 1941 to 1943. The deposits covered by the maps are in the following counties of California: Amador, Calaveras, Eldorado, Glenn, Humboldt, Los Angeles, Madera, Mariposa, Mendocino, Mono, Placer, Plumas, San Bernardino, San Benito, San Luis Obispo, San Joaquin, Sonoma, Stanislaus, Trinity, and Tuolumne.
Geologic map of the Wilmont Creek quadrangle, Ferry and Stevens Counties, Washington
Explore the source record for details and available documents.
Geologic map of the Duwamish Head quadrangle, King and Kitsap Counties, Washington
Explore the source record for details and available documents.
Geologic map of the Lucerne quadrangle, Chelan County, Washington
Explore the source record for details and available documents.
Digital geologic map of the Spokane 1:100,000 quadrangle, Washington and Idaho: A digital database for the 1990 N.L. Joseph map
Geologic data from the geologic map of the Spokane 1:100,000-scale quadrangle compiled by Joseph (1990) were entered into a geographic information system (GIS) as part of a larger effort to create regional digital geology for the Pacific Northwest. The map area is located in eastern Washington and extends across the state border into western Idaho (Fig. 1). This open-file report describes the methods used to convert the geologic map data into a digital format, documents the file structures, and explains how to download the digital files from the U.S. Geological Survey public access World Wide Web site on the Internet.
Tectonics and seismicity of the southern Washington Cascade range
Geophysical, geological, and seismicity data are combined to develop a transpressional strain model for the southern Washington Cascades region. We use this model to explain oblique fold and fault systems, transverse faults, and a linear seismic zone just west of Mt. Rainier known as the western Rainier zone. We also attempt to explain a concentration of earthquakes that connects the northwest-trending Mount St. Helens seismic zone to the north-trending western Rainier zone. Our tectonic model illustrates the pervasive effects of accretionary processes, combined with subsequent transpressive forces generated by oblique subduction, on Eocene to present crustal processes, such as seismicity and volcanism.
Geologic setting of Merrill Lake and evaluation of volcanic hazards in the Kalama River valley near Mount St. Helens, Washington
Volcanic rocks and unconsolidated geologic deposits in the upper Kalama River valley were studied in order to determine the kind of catastrophic geologic events that might accompany a future eruption of Mount St. Helens. The chief purpose of the study was to appraise the potential geologic hazards at the site of a hydroelectric project under consideration by the Cowlitz County Public Utility District. It is concluded that if future eruptions of Mount St. Helens are like those of the recent geologic past, the principal hazards near the project site probably will be from nuees ardentes, mudflows, floods, and lava flows. If the volcano should erupt after the hydroelectric facility is constructed, it is recommended that the reservoir be emptied as quickly as possible, and that persons be evacuated from the valley floors adjacent to the volcano.
Economic geology of the Amity quadrangle, eastern Washington County, Pennsylvania
No abstract available.
Geologic map of the Brush Grove quadrangle, Nelson and Washington Counties, Kentucky
Explore the source record for details and available documents.
Preliminary geologic map of Seattle and vicinity, Washington
Explore the source record for details and available documents.
Geologic map of the Olympic Peninsula, Washington
Explore the source record for details and available documents.
Distribution and description of geologic units in the Mukilteo Quadrangle, Washington
Explore the source record for details and available documents.