Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Geophysical Research- Solid Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources
USGS2012

Strain accumulation across the Denali fault in the Delta River canyon, Alaska

Deformation along the Denali fault in the Delta River canyon was determined from geodetic surveys in 1941/1942, 1970, 1975, and 1979. The data were best for the 1975–1979 interval; in that period the average strain accumulation was essentially pure right lateral shear at a rate of 0.6 ± 0.1 μrad/a (a is years) (engineering shear) across a vertical plane striking N87°E. The plane of maximum shear is rotated about 30° counterclockwise from the local strike of the Denali fault but closely coincides with the strike of a major linear segment of the fault that begins 50 km farther west. The deformation between 1941/1942 and 1970 is consistent with a similar rate of strain accumulation if one removes the coseismic strain step contributed by the 1964 Alaska earthquake. The 1970–1975 deformation is poorly defined owing to uncertainties in the 1970 survey, but the strain accumulation during that period is certainly much less than during the 1975–1979 interval. The 1975–1979 strain accumulation is interpreted by means of a dislocation model which suggests that the Denali fault in the vicinity of the Delta River Canyon behaves as a leaky transform fault (i.e., a source of spreading as well as lateral slip). The block south of the Denali fault appears to be moving westward (parallel to the strike of the Denali fault west of the 147th meridian) at the rate of about 20 mm/a relative to the North American plate. Because the linear segment of the Denali fault east of the 147th meridian (along which the geodetic network is located) strikes N63°W, accommodation of the westward motion of the southern block requires some spreading within the fault zone as well as right lateral slip on the fault.

Journal of Geophysical Research Solid Earth↗
USGS2012

Tectonic setting for ophiolite obduction in Oman

The Samail ophiolite is part of an elongate belt in the Middle East that forms an integral part of the Alpine mountain chains that make up the northern boundary of the Arabian-African plate. The Samail ophiolite represents a portion of the Tethyan ocean crust formed at a spreading center of Middle Cretaceous age (Cenomanian). During the Cretaceous spreading of the Tethyan Sea, Gondwana Land continued its dispersal, and the Arabian-African plate drifted northward about 10°. These events combined with the opposite rotation of Eurasia and Africa initiated the closing of the Tethyan during the Late Cretaceous. At the early stages of closure, downwarping of the Arabian continental margin combined with the compressional forces of closure from the Eurasian plate initiated obduction of the Tethyan oceanic crust along preexisting transform faults, and still hot oceanic crust was detached along oblique northeast dipping thrust faults. Amphibolites developed at the base of the detached hot peridotite as it was thrust southward over oceanic volcanic and sedimentary rocks. Plate configurations combined with palinspastic reconstructions show that subduction and attendant large-scale island arc volcanism did not commence until after the Tethyan sea began to close and after the Samail ophiolite was emplaced southward across the Arabian continental margin. The Samail ophiolite nappe now rests upon a melange consisting mainly of pelagic sediments, volcanics, and detached fragments of the basal amphibolites which in turn rest on autochthonous shelf carbonates of the Arabian platform. Laterites and conglomerates with reworked laterites on the eroded upper surface of the ophiolite indicate a period of emergence prior to the deposition of shallow water Maestrichtian carbonates. Following emplacement (Eocene) of the Samail ophiolite, the Tethyan oceanic crust began northward subduction, and active arc volcanism started just north of the present Jaz Murian depression in Iran.

Journal of Geophysical Research Solid Earth↗
USGS2012

An assessment of the accuracy of the geodetic measurements that define the southern California uplift

Examination of the charge that the geodetic measurements which define the southern California uplift are seriously flawed by height-dependent systematic errors indicates that this charge is unfounded. Our review of those factors designed to minimize the effects of rod error shows that systematic errors attributable to rod miscalibration are trivial and would tend to cancel during the particularly pertinent period 1955–1965. Comparisons between the results of measurements in which the correlation between topography and signal is generally poor reveal large aseismic tilts in a number of places within and around the margins of the uplift. Especially significant in this context are the results of preuplift and postuplift levelings over routes characterized by diverse length, topography, and atmospheric conditions that produce closely matching, temporally equivalent heights for a representative bench mark within the uplift. Statistical analyses of the short-wavelength components of uplift signal and elevation along a frequently repeated survey line indicate variable correlations between the two. However, the spatial and temporal patterns of these correlations are inconsistent with their attribution to height-dependent systematic errors. Statistically significant short-wavelength correlations along this survey line are reasonably explained in part as due to real movement associated with differentially subsiding bench marks, and there is a strong likelihood that this movement tends to dominate many of the correlations.

Journal of Geophysical Research Solid Earth↗
USGS2012

An interpretation of episodic slip on the Calaveras fault near Hollister, California

Data from a precision multi-wavelength distance measuring (MWDM) instrument, located near Hollister, California, have been analyzed in terms of strike-slip faulting in the region covered by the network. Four episodes of deformation that are readily identifiable in the MWDM data for the year following September 1975 can be modeled as slip on the Calaveras fault. Creepmeter data tend to support this interpretation, since the creep events and the observed episodes of deformation appear to be correlated in a temporal sense. Lower bounds on the moment for each episode of slip can be determined from the MWDM data by the technique of linear programing. The results indicate that aseismic slip is the dominant mechanism for strain release, since the combined moment of 1.16 × 10 24 dyn cm for the four episodes far exceeds the moment of all of the earthquakes that occurred during the year. Creepmeter data and geologic evidence that are taken in conjunction with the lower bound of the moment indicate that the depth of aseismic slip for some of the episodes of fault slip could extend to below the greatest depth of earthquake hypocenters for this region of central California.

Journal of Geophysical Research Solid Earth↗
USGS2012

Geodetic analysis of reservoir depletion at the Geyser steam field in northern California

Reservoir depletion at the Geysers from 1974 to 1977 is evident in measured changes in gravity, surface strain, and pore pressure drainage. The drainage area increased about 20%, the maximum gravity decrease was about −120 μGal, and the maximum elevation change was about 6 cm during this period. Since the net mass withdrawal is known, it may be combined with the gravity change to estimate a drainage volume. The maximum drainage volume is 25 km 3 . Because the depth of the caprock and extent of the pore pressure drainage is known, this volume limit implies that no significant mass withdrawal occurs below a depth of 4 km. The ratios of surface elevation changes to horizontal contraction coinciding with the drainage area imply an equant drainage geometry, assuming that fluid production produces negative dilatation. Using the same cylindrical geometry used to model the gravity, negative dilatational strain rates of 4 to 5 × 10 −5 /yr were found to produce the observed surface displacements. The likelihood of boiling in the system to produce steam combined with apparent large bulk moduli (from seismic velocities) and small pore pressure declines suggest that most of the reservoir contraction is due to cooling.

Journal of Geophysical Research Solid Earth↗
USGS2012

Strain accumulation in southern California, 1973-1980

Frequent surveys of seven trilateration networks in southern California over the interval 1973–1980 suggest that a regional increment in strain may have occurred in 1978–1979. Prior to 1978 and after late 1979 the strain accumulation has been predominantly a uniaxial north-south compression. This secular trend was interrupted sometime in 1978–1979 by an increment in both north-south and east-west extension in five of the seven networks. The onset of this change appears to have occurred first in the networks farthest south. The changes occurred without any unusual seismicity within the networks, but the overall seismicity in southern California was unusually low prior to and has been unusually high since the occurrence. The average principal strain rates for the seven networks in the 1973–1980 interval are 0.17 μstrain/yr north-south contraction and 0.08 μstrain/yr east-west extension. Although the observed increment in strain could be related to unidentified systematic error in the measuring system, a careful review of the measurements and comparisons with three other measuring systems reveal no appreciable cumulative systematic error.

Journal of Geophysical Research Solid Earth↗
USGS2012

Quaternary and geodetically measured crustal movements in the Tokai District, Central Honshu, Japan

Geodetic measurements made in this century demonstrate that modern movements correlate well with deformation that has occurred during the past 2 m.y. Both show effects of subduction and of the Quaternary collision of Izu Peninsula with Central Honshu. Westward from Suruga Bay, deformation is greatest near the coast, decreases markedly towards the uplifting Akaishi Mountains, and then increases again in the conjugate block-faulted terranes of Chubu district. Quaternary faults, historic earthquakes, and the distribution of horizontal shear straining since ∼1880 all reflect this deformation pattern. Since 1900 the west coast of Suruga Bay has undergone secular subsidence, horizontal contraction and tilting towards Suruga Trough, all typical of the strain buildup process that occurs landward of subduction zones. However, futher westward, active mountain building is occuring, and the Akaishi Ranges are rising 3 mm/a. Unlike the episodic aseismic uplift of the Transverse Ranges of southern California, movements here have been relatively uniform. It seems likely that an increase in the tilt rate of the Suruga coast recognized since ∼1973 is part of a long-term readjustment to the great 1944 Tonankai earthquake. Data show that a monotonic increase has occurred since at least 1949, and similar effects are seen adjacent to the 1944 rupture zone over 200 km southwest along the Nankai Trough.

Journal of Geophysical Research Solid Earth↗
USGS2012

Gravity model and structural implications of the Goddard Pendant, Sierra Nevada, California

A subsurface model for the Goddard pendant is constructed from a residual gravity high of about 7 mGal over the pendant. The model, which is the simplest and most geologically reasonable possibility, shows a metamorphic block that tapers with depth and extends about 3.5 km below the surface. The structures in the Goddard pendant are similar in style and orientation to those in other Sierra Nevada pendants, indicating that the country rock was neither deformed nor rotated during pluton emplacement. Consequently, emplacement must have been a passive rather than a forceful process. The pendant itself represents a piece of country rock trapped between plutons which are dome shaped in cross section.

Journal of Geophysical Research Solid Earth↗
USGS2012

The Redskin granite: Evidence for thermogravitational diffusion in a Precambrian granite batholith

The 1000-Ma-old composite Pikes Peak batholith consists largely of medium- to coarse-grained biotite granite but is intruded by several smaller granite plutons. Two of these, the Tarryall Mountains batholith and the Redskin Granite (Hawley, 1969; Hawley and Wobus, 1977), are here interpreted as cupolas atop the main mass of the Pikes Peak batholith. Chemical analysis for 38 elements in rocks from the Redskin Granite, the Tarryall Mountains batholith, and the biotite granite of the Pikes Peak batholith support the contention that the compositions of the smaller plutons are unlikely to have evolved from that of the main mass of the batholith by crystal fractionation. It is believed that these compositions arose through liquid-state fractionation processes, possibly the convection-aided thermogravitational model of Shaw et al. (1976). It is important to recognize that the chemical signature of this fractionation process can be discerned in holocrystalline rocks as well as in their glassy equivalents because the process may be instrumental in the formation of some kinds of lithophile ore deposits.

Journal of Geophysical Research Solid Earth↗
USGS2012

Chemistry of rock-forming minerals of the Cretaceous-Paleocene batholith in southwestern Japan and implications for magma genesis

Petrographic descriptions and electron microprobe analyses of minerals are presented for 35 specimens from seven suites chosen to examine the transition from magnetite series to ilmenite series granitoids along two transects across the Cretaceous-Paleocene Inner Zone batholith of southwestern Japan. Regularities in chemical compositions of amphiboles, biotites, and feldspars suggest that fundamentally similar processes produced the magmas that formed the two series. Constant or decreasing Fe/(Fe+Mg) for biotites and amphiboles with increasing host rock silica content, coupled with the absence of early formed magnetite and sphene, suggest that magnetite series rocks may have become oxidized during crystallization near the level of intrusion, through the processes of second boiling and differential loss of hydrogen. For the Daito-Yokota, magnetite series suite, Fe/(Fe+Mg) for biotites decreased from 0.48 to 0.37 as SiO 2 content of the host rock increased from 55.3 to 75.5 wt %; for an ilmenite series suite from the Takanawa Peninsula, Fe/(Fe+Mg) for biotites increased from 0.51 to 0.77 with an increase in host rock SiO 2 from 53.4 to 75.5. Detailed consideration of amphibole chemistry shows predominance of edenitic and tschermakitic substitution schemes as well as coupling between substitutions of Ti in octahedral sites and Al IV . Interrelations between amphibole and biotite chemistry show that Fe/(Fe+Mg) and Mn contents can be interpreted in terms of equilibration, whereas Ti content cannot. The chemistry of chlorites correlates well with that of biotites; primary and secondary muscovites are distinct in composition. Plagioclase in all studied suites shows igneous zoning appropriate to host rock composition; perthitic alkali feldspars in all samples have lost albite component, and temperatures based on the two-feldspar geothermometer are low. The biotite-apatite geothermometer is also inoperative for this group of samples because fully fluorinated apatites typically occur in biotites of modest F content. Whereas magnetites have reequilibrated, analyses of ilmenites for the representative Daito-Yokota and Takanawa suites corroborate biotite compositional data and suggest that f O2 probably differed by 2 to 3 orders of magnitude during crystallization of silica-rich magnetite and ilmenite series granites. Whole-rock chemistry supports mineral chemistry in suggesting that the studied granitoids have crystallized from magmas generated in a lower crustal environment in which mantle-derived magmas partially melted source materials with igneous characteristics.

Journal of Geophysical Research Solid Earth↗
USGS2012

Petrology and geochronology of metamorphosed volcanic rocks and a middle Cretaceous volcanic neck in the east-central Sierra Nevada, California

Metamorphosed Mesozoic volcanic rocks from the east-central Sierra Nevada range in composition from basalt to rhyolite and have ages, based on whole rock Rb-Sr and U-Pb zircon dating, of about 237–224, 185, 163, 134, and 100 m.y. The major plutons of the batholith in this area are of Triassic (215–200 m.y.) and Cretaceous (94–80 m.y.) ages. Initial 87 Sr/ 86 Sr values for the metamorphosed volcanic rocks of the area are in the range from 0.7042 to 0.7058 and are generally different from the values for the surrounding batholithic rocks (0.7056–0.7066). A circular, zoned granitic pluton, with an outcrop area of 2.5 km 2 , similar in appearance to a ring dike complex, was apparently a conduit for some or possibly all of the middle-Cretaceous metamorphosed volcanic rocks exposed about 5 km to the south in the western part of the Ritter Range. Samples from the metamorphosed volcanic rocks and the pluton yield a Rb-Sr whole rock isochron age of 99.9 ± 2.2 m.y. with an initial 87 Sr/ 86 Sr of 0.7048 ± 0.0001. Major element variation diagrams of the pluton and volcanic rocks define coincident compositional trends. The pluton, intruded into Early Jurassic metamorphosed volcanic rocks (Rb-Sr whole rock isochron age of 185 ± 6 m.y., initial 87 / 86 Sr = 0.70474 ± 0.00009), is composed of a central body of granite that is intruded into and almost completely surrounded by a crescent-shaped outer rim of quartz monzodiorite. Contact relations between the granitic rocks, intrusive in some places and completely gradational at other places, indicate that the quartz monzodiorite was not completely crystallized prior to the intrusion of the granite. Modal minerology within the pluton is also consistent with this inferred crystallization history. The granitic rock textures are cataclastic, characterized by a groundmass of feldspar and quartz that surrounds larger grains of feldspar, hornblende, and biotite. Widely spaced aplite dikes from the granite intrude the quartz monzodiorite along the contact between the granitic rocks. The aplite dikes and interstitial alkali feldspar associated with myrmekite in the pluton, being undeformed, indicate crystallization of a small amount of silicate liquid after cataclasis. Aplite compositions suggest a minimum crystallization pressure of 0.5 kb (1–2 km); this depth is consistent with crystallization near the base of a large stratovolcano. The pluton is characterized by steep, linear features, defined by mineral clots and inclusions, that probably formed during the upward movement of the nearly crystallized magma in the volcanic conduit. The ages of volcanic events relative to the ages of the major intrusive epochs and the major element and isotopic compositions of the volcanic rocks relative to the major plutons indicate that the volcanic rocks are not simply or directly related to the major plutons in the Sierra Nevada.

Journal of Geophysical Research Solid Earth↗
USGS2012

Two-mica granites of northeastern Nevada

The field settings are described and analytical data are presented for six two-mica granites from north-eastern Nevada. High δ 18 O and 87 Sr/ 86 Sr values indicate that all are S-type granites, derived from continental crust. The major element chemistry and accessory mineral contents of these rocks also are characteristic of S-type granites. Chemical, X ray, and other data are presented for the micas recovered from these granites. The muscovites are notably high in Fe 2 O 3 , FeO, and MgO. Except for one hydrobiotite, each of the biotites has an MgO content near 6.0 weight percent. Two different types of two-mica granites are recognized in the area of this study. One type is distinguished by the presence of many biotite euhedra within muscovite phenocrysts and by an unusual suite of accessory minerals completely devoid of opaque oxides. This type probably resulted from anatexis of late Precambrian argillites under conditions of relatively low oxygen fugacity, along a line that roughly coincides with the westward disappearance of continental basement. In the other textural type of two-mica granite the micas are equigranular and there is a greater variety of accessory minerals. The magmatic evolution of this type also appears to reflect the influence of late Precambrian argillites; there may be age differences between the two types of two-mica granites.

Journal of Geophysical Research Solid Earth↗
USGS2012

A stochastic fault model. 2. Time-dependent case

A random model of fault motion in an earthquake is formulated by assuming that the slip velocity is a random function of position and time truncated at zero, so that it does not have negative values. This random function is chosen to be self-affine; that is, on change of length scale, the function is multiplied by a scale factor but is otherwise unchanged statistically. A snapshot of slip velocity at a given time resembles a cluster of islands with rough topography; the final slip function is a smoother island or cluster of islands. In the Fourier transform domain, shear traction on the fault equals the slip velocity times an impedance function. The fact that this impedance function has a pole at zero frequency implies that traction and slip velocity cannot have the same spectral dependence in space and time. To describe stress fluctuations of the order of 100 bars when smoothed over a length of kilometers and of the order of kilobars at the grain size, shear traction must have a one-dimensional power spectrum is space proportional to the reciprocal wave number. Then the one-dimensional power spectrum for the slip velocity is proportional to the reciprocal wave number squared and for slip to its cube. If slip velocity has the same power law spectrum in time as in space, then the spectrum of ground acceleration will be flat (white noise) both on the fault and in the far field.

Journal of Geophysical Research Solid Earth↗
USGS2012

Geomagnetic local and regional harmonic analyses

Procedures are developed for using rectangular and cylindrical harmonic analyses in local and regional areas. Both the linear least squares analysis, applicable when component data are available, and the nonlinear least squares analysis, applicable when only total field data are available, are treated. When component data are available, it is advantageous to work with residual fields obtained by subtracting components derived from a harmonic potential from the observed components. When only total field intensity data are available, they must be used directly. Residual values cannot be used. Cylindrical harmonic analyses are indicated when fields tend toward cylindrical symmetry; otherwise, rectangular harmonic analyses will be more advantageous. Examples illustrating each type of analysis are given.

Journal of Geophysical Research Solid Earth↗
USGS2012

Lead and strontium isotopes and related trace elements as genetic tracers in the Upper Cenozoic rhyolite-basalt association of the Yellowstone Plateau volcanic field

Supported by various field geologic and petrologic data, the contents of Pb, U, Th, Rb, and Sr and the isotopic compositions of Pb and Sr for upper Cenozoic volcanic rocks of the Yellowstone Plateau volcanic field are consistent with the hypothesis of derivation of the basaltic and rhyolitic magmas by partial melting of distinct source regions in the upper mantle and lower crust, respectively. All the basalt samples analyzed but one have systematically lower values of 207 Pb/ 204 Pb and 87 Sr/ 86 Sr than the rhyolites. The values of 206 Pb/ 204 Pb are smaller, and 87 Sr/ 86 Sr are mostly larger than known values in oceanic basalts. In all but one case, the values of 207 Pb/ 204 Pb are higher than expected from an extrapolation of known values in oceanic basalts to less radiogenic values of 206 Pb/ 204 Pb. Because there are no xenoliths, phenocrysts are only moderate to sparse in abundance, REE patterns are low and flat at the radiogenic end of lead isotopic compositions, several values of Rb/Sr are low, and 80% of the basalt samples form a well-developed secondary isochron separate from the rhyolites, we favor an interpretation for basalt genesis wherein isotopic signatures of most mafic magmas were attained in a continental ‘keel’ of mantlelike character about 2.6 b.y. old or somewhat older attached to the crust, and these signatures were unaltered by magma passage through the crust. At the very least, the current data continue to cast serious doubt as to the inevitability of crustal contamination for basaltic magma intruding the continental environment and postulate that much can be learned about the mantle under continents through the study of continental basalts. One basalt unit with an unusually low value of 207 Pb/ 204 Pb and an 87 Ar/ 86 Ar less than 0.704 may represent subcontinental ‘keel’-derived magma that rose unaltered to the surface. Our data also are not consistent with formation of this rhyolite-basalt association primarily by such processes as crystal fractionation, separation of immiscible silicate liquids from a common parental magma, or fractional melting of a homogeneous source. Rather as a conceptual model, we envision large mafic intrusions to have been injected into the lower crust resulting in rhyolite generation through partial anatexis of the adjacent wall rocks which probably had a 206 Pb/ 204 Pb < 17 and 87 Sr/ 86 Sr > 0.709; a model that has much in common with that proposed by Holmes (1931). All the other hypotheses listed have the necessary added complication that either the basalt or the rhyolite or both become contaminated after the two magma types separated, have problems accounting for the lack of igneous rocks of intermediate compositions or production of such large volumes of rhyolitic material (∼5000 km 3 ), and fail to explain why rhyolitic magma is not a more common occurrence in the ocean basin. We appeal to bouyancy of rhyolites to generate a barrier for basalt magma migration and account for the great preponderance of rhyolite relative to basalt at the surface. Furthermore, the complex isotopic picture in the rhyolites indicates that many of these magmas interacted with the upper crustal geologic units that they traversed. The interactions involved diverse processes, probably including reacton with hydrothermal fluids or hydrothermally altered rocks at high levels as well as by contamination with Phanerozoic sedimentary and Precambrian crystalline rocks at deeper levels. At the very least, we feel our study adds a cautionary note to the currently increasingly popular hypothesis that differentiation of basalt or gabbro magmas to rhyolite or granite (as distinct from tonalite or dacite) is a common occurrence and is therefore an important continential building process. Models for formation of rhyolite and granite predominantly by reworking of crust (anatexis) must still be considered. The primitive Archean mantle of the region was characterized by higher Rb/Sr, U/Pb, and Th/U values than are typical of modern suboceanic mantle. The mantle residuum within the continental subcrustal lithosperic ‘keel’ that resulted from the Archean crustal differentiation event probably was depleted in Rb/Sr and U/Pb, and the crust was correspondingly enriched in these ratios. The crust probably was further differentiated by an Archean high-grade metamorphism, during or after the primary event, into a granulitic lower crust depleted in U/Pb and Rb/Sr and a lower-grade upper crust enriched in these ratios.

Journal of Geophysical Research Solid Earth↗
USGS2012

Earthquakes of Loihi submarine volcano and the Hawaiian hot spot

Loihi is an active submarine volcano located 35 km south of the island of Hawaii and may eventually grow to be the next and southernmost island in the Hawaiian chain. The Hawaiian Volcano Observatory recorded two major earthquake swarms located there in 1971–1972 and 1975 which were probably associated with submarine eruptions or intrusions. The swarms were located very close to Loihi's bathymetric summit, except for earthquakes during the second stage of the 1971–1972 swarm, which occurred well onto Loihi's southwest flank. The flank earthquakes appear to have been triggered by the preceding activity and possible rifting along Loihi's long axis, similar to the rift-flank relationship at Kilauea volcano. Other changes accompanied the shift in locations from Loihi's summit to its flank, including a shift from burst to continuous seismicity, a rise in maximum magnitude, a change from small earthquake clusters to a larger elongated zone, a drop in b value, and a presumed shift from concentrated volcanic stresses to a more diffuse tectonic stress on Loihi's flank. The 1971–1972 swarm began at depths of 20–50 km about 1 month before the shallow swarm started and suggests an upward migration of seismicity as the first stage of the 13-month swarm. The seismic ‘root’ of Kilauea volcano is well defined by earthquakes which plunge to the south and southwest to a depth of 50–60 km, terminating in a region in which earthquakes are associated with deep harmonic tremor and magma. The zone of these deeper earthquakes and tremor lies between Kilauea, Loihi, and Mauna Loa volcanoes, may feed magma to all three volcanoes, and probably locates the Hawaiian hot spot.

Journal of Geophysical Research Solid Earth↗
USGS2012

A teleseismic analysis of the New Brunswick earthquake of January 9, 1982

The analysis of the New Brunswick earthquake of January 9, 1982, has important implications for the evaluation of seismic hazards in eastern North America. Although moderate in size ( m b 5.7), it was well-recorded teleseismically. Source characteristics of this earthquake have been determined from analysis of data that were digitally recorded by the Global Digital Seismograph Network. From broadband displacement and velocity records of P waves, we have obtained a dynamic description of the rupture process as well as conventional static properties of the source. The depth of the hypocenter is estimated to be 9 km from depth phases. The focal mechanism determined from the broadband data corresponds to predominantly thrust faulting. From the variation in the waveforms the direction of slip is inferred to be updip on a west dipping NNE striking fault plane. The steep dip of the inferred fault plane suggests that the earthquake occurred on a preexisting fault that was at one time a normal fault. From an inversion of bodywave pulse durations, the estimated rupture length is 5.5 km. Average properties of the rupture process were examined by a moment tensor analysis of long-period P and SH body waves. The long-period moment of this earthquake was 5.3 × 10 24 dyne cm. The static and dynamic stress drops are 41 and 65 bars, respectively, similar to those of many earthquakes with similar moment in regions that are more seismically active. The joint epicenter determination algorithm was used to locate, relative to the mainshock, the three teleseismically recorded aftershocks that occurred through March 31, 1982. The relocated hypocenters of the aftershocks are significantly different from each other and from that of the mainshock; they provide additional support for the source dimensions inferred from the waveform analysis.

Journal of Geophysical Research Solid Earth↗