Search USGS⌕ Search

SEARCH · Search USGS

Results for “International Geology Review”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources
USGS2012

Identifying a base network of federally funded streamgaging stations

The U.S. Geological Survey (USGS) has completed a preliminary analysis to identify streamgaging stations needed in a base network that would satisfy five primary Federal goals for collecting streamflow information. The five goals are (1) determining streamflow at interstate and international borders and at locations mandated by court decrees, (2) determining the streamflow component of water budgets for the major river basins of the Nation, (3) providing real-time streamflow information to the U.S. National Weather Service to support flood-forecasting activities, (4) providing streamflow information at locations of monitoring stations included in USGS national water-quality networks, and (5) providing streamflow information necessary for regionalization of streamflow characteristics and assessing potential long-term trends in streamflow associated with changes in climate. The analysis was done using a Geographic Information System. USGS headquarters staff made initial selections of stations that satisfied at least one of the five goals, and then staff in each of the 48 USGS district offices reviewed the selections, making suggestions for additions or changes based on detailed local knowledge of the streams in the area. The analysis indicated that 4,242 streamgaging stations are needed in the base network to meet the 5 Federal goals for streamflow information. Of these, 2,692 stations (63.5 percent) are currently operated by the USGS, 277 stations (6.5 percent) are currently operated by other agencies, 865 (20.4 percent) are discontinued USGS stations that need to be reactivated, and 408 (9.6 percent) are locations where new stations are needed. Copyright ASCE 2004.

Conference Paper↗
USGS2022

Upper Rio Grande Basin water-resource status and trends: Focus area study review and synthesis

The Upper Rio Grande Basin (URGB) is a critical international water resource under pressure from a myriad of climatic, ecological, infrastructural, water-use, and legal constraints. The objective of this study is to provide a comprehensive assessment of the spatial distribution and temporal trends of selected water-budget components (snow processes, evapotranspiration (ET), streamflow processes, and groundwater storage) using integrated analyses, such as watershed modeling and water availability and use data in the URGB over the past three decades. A spatially distributed snow evolution modeling system simulated snowpack processes over 34 years (1984–2017). It highlighted snow water equivalent declines from -35 to -77 mm/decade with widespread variability across elevation zones and land cover types. Gridded actual ET data from the SSEBop model were developed and tested for the URGB and demonstrated that all land-cover types had significant decreasing trends (1986-2015) ranging from -14 to -80 mm/decade. Conductivity-mass-balance (CMB) hydrograph separation results found that baseflow forms a large component of total streamflow, ranging from 29 to 69% (49% average) of total streamflow at 17 URGB sites upstream of Albuquerque, NM. Three of 4 graphical hydrograph separation methods in the U.S. Geological Survey Groundwater Toolbox were found to be inappropriate for estimating baseflow in the URGB; the most promising method, baseflow index (BFI) Standard, was optimized using CMB data and tested at three URGB sites, with resulting overestimation of 0 to 47%. Simulated changes in groundwater storage were extracted from historical and recent groundwater-flow models of select alluvial basins (San Luis, Española, Middle Rio Grande, and Tularosa-Hueco). In general, decreases in groundwater storage were observed from 1903 to 2013 except for the San Luis alluvial basin (Colorado), where periods of recovery are observed. The PRMS hydrologic model was successfully calibrated for 9 near-native subbasins (Nash-Sutcliffe efficiency 0.47 to 0.85) and parameters translated to the remaining subbasins; compared to simulated near-native flows (with minimal influence of reservoirs or diversions), observed Rio Grande streamgage flows demonstrated reductions of 40% or more for New Mexico and Texas areas of the basin. Significant decreasing trends (1980-2015) in precipitation, snowmelt rate, streamflow, and baseflow were observed at many of the 12 streamgage basins studied, which suggests that the decreasing trends for actual ET may be related to overall decreasing water availability in the basin, with negative implications for agricultural production and groundwater abstraction. Water security concerns arise from our findings of higher fraction precipitation as rain, slower snowmelt rates leading to decreasing streamflow production, and an increasing fraction of baseflow, all of which will affect the timing and magnitude of water available for human needs in the basin.

Upper Rio Grande Basin↗
USGS2023

Annotated bibliography of scientific research on Gunnison sage-grouse published from January 2005 to September 2022

Integrating recent scientific knowledge into management decisions supports effective natural resource management and can lead to better resource outcomes. However, finding and accessing scientific knowledge can be time consuming and costly. To assist in this process, the U.S. Geological Survey is creating a series of annotated bibliographies on topics of management concern for western lands. Previously published reports introduced a methodology for preparing annotated bibliographies to facilitate the integration of recent, peer-reviewed science into resource management decisions. Therefore, relevant text from those efforts is reproduced here to frame the presentation. Centrocercus minimus (Gunnison sage-grouse; hereafter GUSG) has been a focus of scientific investigation since the early 2000s. The U.S. Fish and Wildlife Service listed GUSG as threatened under the Endangered Species Act in 2014 because of declining populations and increasing habitat loss. The U.S. Fish and Wildlife Service, Bureau of Land Management, and Colorado Parks and Wildlife have sought to increase the conservation of this species by adapting management and recovery plans to reduce threats and increase population resiliency. GUSG are studied less than the closely related Centrocercus urophasianus (greater sage-grouse); however, research efforts have recently increased to understand the life history, genetics, and habitat suitability of this sagebrush-obligate species. We compiled and summarized peer-reviewed journal articles, data products, and formal technical reports (such as U.S. Department of Agriculture Forest Service General Technical Reports and U.S. Geological Survey Open-File Reports) on GUSG, published between January 2005 and September 2022. We first systematically searched three reference databases and three government databases using the following search phrases: “Gunnison sage-grouse” or “lesser sage-grouse” or “Gunnison grouse” or “Gunnison sage grouse” or “lesser sage grouse” or “ Centrocercus minimus .” We refined the initial list of products by removing (1) duplicates, (2) publications that were not published as research, data products, or scientific review articles in peer-reviewed journals or as formal technical reports, and (3) products that did not have GUSG as a research focus or products that did not present new data or findings about GUSG. We summarized each product using a consistent structure (background, objectives, methods, location, findings, and implications) and identified the management topics (for example, population estimates or targets, habitat, and management efforts) addressed by each product. We also noted which publications included new geospatial data. The review process for this annotated bibliography included two initial internal colleague reviews of each summary, requesting input on each summary from an author of the original publication, and a formal peer review. Our initial searches resulted in 80 total products, of which 63 met our criteria for inclusion of which 53 were products that had not been summarized before. Across products summarized in the annotated bibliography, broad-scale habitat characteristics; population estimates or targets; behavior or demographics; and genetics were the most commonly addressed management topics. The bibliographies are available on the Science for Resource Managers tool ( https://apps.usgs.gov/science-for-resource-managers ) and are searchable by topic, location, and year, and the search tool includes links to each original publication. The studies compiled and summarized in this annotated bibliography may inform planning and management actions that seek to maintain and restore sagebrush landscapes and GUSG populations across the GUSG range.

Colorado↗
USGS2005

Marine mineral resources of Pacific Islands— A review of the Exclusive Economic Zones of islands of U.S. affiliation, excluding the State of Hawaii

The United States Exclusive Economic Zone (EEZ) was established in 1983 and comprises all marine areas within 200 nautical miles (370 kilometers) of the nearest U.S. land. This vast area of 3.38 million square nautical miles (11.6 million square kilometers) is about 20 percent greater than the entire land area of the United States. The resource potential of the vast mineral deposits that occur within the U.S. EEZ is unknown, despite field studies that have taken place during the past 25 years. Since about 1975, information on marine mineral deposits has been obtained by numerous research cruises to the Pacific Ocean by the U.S. Geological Survey (USGS), the U.S. National Oceanic and Atmospheric Administration (NOAA), equivalent government agencies in Germany, Canada, France, Russia, Japan, China, South Korea, Australia, and New Zealand, and by academic researchers from all of these nations. Although most of the cruises by other nations explored areas outside the U.S. EEZ, information gained from those studies can aid in the evaluation of the mineral potential in the U.S. EEZ. However, the global effort remains inadequate to allow for the quantitative evaluation of mineral resources contained within the EEZ of nations or within international regions of the oceans.

Circular↗
USGS2022

Annotated bibliography of scientific research on pygmy rabbits published from 1990 to 2020

Integrating recent scientific knowledge into management decisions supports effective natural resource management and can lead to better resource outcomes. However, finding and accessing scientific knowledge can be time consuming and costly. To assist in this process, the U.S. Geological Survey (USGS) is creating a series of annotated bibliographies on topics of management concern for western lands. Previously published reports introduced a methodology for preparing annotated bibliographies to facilitate the integration of recent, peer-reviewed science into resource management decisions. Therefore, relevant text from those efforts is reproduced here to frame the presentation. Sagebrush ecosystems throughout North America face management challenges including habitat loss and fragmentation. Brachylagus idahoensis (pygmy rabbits) are a sagebrush-obligate species that has experienced population declines and range contraction in recent decades. A disjunct population of pygmy rabbits in the Columbia Basin in Washington was listed as federally endangered in 2003. Due to their specialized habitat requirements and low dispersal ability, pygmy rabbits are a high priority for managers throughout their range. We compiled and summarized peer-reviewed journal articles, data products, and formal technical reports (such as U.S. Forest Service General Technical Reports and U.S. Geological Survey Open-File Reports) on pygmy rabbits published between January 1, 1990 and December 31, 2020. We first conducted a structured search of three reference databases and three government databases using the phrase “pygmy rabbit” or “ Brachylagus idahoensis .” We refined the initial list of products by removing (1) duplicates, (2) products not written in English, (3) publications that were not focused on North America, (4) publications that were not published as research, data products, or scientific review articles in peer-reviewed journals or as formal technical reports, and (5) products for which pygmy rabbits were not a research focus or for which the study did not present new data or findings about pygmy rabbits. We summarized each product using a consistent structure (background, objectives, methods, location, findings, and implications) and identified the management topics (for example, captive breeding, habitat characteristics, and population estimates) addressed by each product. We also noted which publications included new publicly available geospatial data. The review process for this annotated bibliography included an initial internal colleague review of each summary, requesting input on each summary from an author of the original publication, and a formal peer review. Our initial searches resulted in 2,285 total products, of which 105 met our criteria for inclusion. Sensitive/rare wildlife, behavior or demographics, site-scale habitat characteristics, habitat selection, and effects distances or spatial scale were the management topics most commonly addressed. The online version of this bibliography, Science for Resource Managers, will be searchable by topic, location, and year; it will include links to each original publication, where available. The studies compiled and summarized here may inform planning and management actions that seek to maintain and restore sagebrush landscapes and associated native species across the western United States.

Open-File Report↗
USGS2024

Annotated bibliography of scientific research on Taeniatherum caput-medusae published from January 2010 to January 2022

Integrating recent scientific knowledge into management decisions supports effective natural resource management and can lead to better resource outcomes. However, finding and accessing scientific knowledge can be time consuming and costly. To assist in this process, the U.S. Geological Survey is creating a series of annotated bibliographies on topics of management concern for western lands. Previously published reports introduced a methodology for preparing annotated bibliographies to facilitate the integration of recent, peer-reviewed science into resource management decisions. Therefore, relevant text from those efforts is reproduced here to frame the presentation. Invasive annual grasses are widely distributed throughout the western United States and threaten native ecosystems by altering fire regimes, replacing native plants, and altering grazing patterns, often with tremendous associated costs. One invasive annual grass, Taeniatherum caput-medusae (hereafter, medusahead), was first documented in the United States in 1887 and has been identified as a species of management concern. Medusahead’s life history traits allow it to quickly and effectively dominate native plant communities, and it has already taken over millions of acres in western North America. Although medusahead can spread widely and disrupt ecosystem function, it has been studied less than other western invasive grass species. We compiled and summarized peer-reviewed journal articles, data products, and formal technical reports (such as U.S. Department of Agriculture Forest Service General Technical Reports and U.S. Geological Survey Open-File Reports) on medusahead, published between January 2010 and January 2022. We first performed a systematic search of three reference databases and three government databases using the search phrase “medusahead” OR “medusa head” OR “ Taeniatherum caput-medusae ” OR “ Taeniatherum caputmedusae ” OR “ Taeniatherum asperum .” We refined the initial list of products by removing (1) duplicates, (2) products not written in English, (3) publications that were not focused on North America, (4) publications that were not published as research, data products, or scientific review articles in peer-reviewed journals or as formal technical reports, and (5) products for which medusahead was not a research focus, or the study did not present new data or findings about medusahead. We summarized each product using a consistent structure (background, objectives, methods, location, findings, and implications) and identified the management topics (for example, species and population characteristics; habitat; and control and management efforts) addressed by each product. We also noted which publications included new geospatial data. The review process for this annotated bibliography included an initial internal colleague review of each summary, requesting input on each summary from an author of the original publication, and a formal peer review. Our initial searches resulted in 4,245 total products, of which 211 met our criteria for inclusion. The most commonly addressed management topics addressed in products summarized in the annotated bibliography were as follows: nonnative invasive plants, weed management, site-scale habitat characteristics, habitat restoration or reclamation, and cultural management of weeds. All published bibliographies, including the online version of this bibliography, are available at the Science for Resource Managers ( https://apps.usgs.gov/science-for-resource-managers ). This database is searchable by topic, location, and year and includes links to each original publication. The studies compiled and summarized here may inform planning and management actions that seek to maintain and restore sagebrush landscapes and associated native species across the western United States.

Open-File Report↗
USGS2019

A Methodology to Assess the National and Regional Impacts of U.S. Wind Energy Development on Birds and Bats

This scientific investigations report describes an effort by the U.S. Geological Survey (USGS) that used research, monitoring data, and modeling to develop a methodology to assess both the current and future population-level consequences of wind energy development on species of birds and bats that are present in the United States during any part of their life cycle. The methodology is currently applicable to birds and bats, focuses primarily on the effects of collisions with turbines, and can be applied to any species that breeds in, migrates through, or otherwise uses any part of the United States. The methodology assesses species at the national and regional scales and identifies those species potentially in need of more detailed study, as well as those species that are likely at low risk from wind energy development. This approach is fundamentally different from existing methods focusing on impacts at individual facilities. This report supersedes USGS Scientific Investigations Report 2015–5066 by the same authors, which described a preliminary version of the methodology. Following reviews of the preliminary methodology by a panel of external experts, public comments, and additional internal review, the methodology was revised and finalized. The three components of the refined methodology described in this new report rely on publicly available fatality information, population estimates, species range maps, turbine location data, biological characteristics of species, and population models. First, three metrics are combined to determine direct and indirect relative effects from wind energy facilities to generate a list of species scores. Second, a generic population model estimates the expected change in population trend caused by the additive mortality from collisions with wind turbines. Third, the methodology combines an estimate of observed fatalities and an estimate of potential biological removal to assess the possibility of a decrease in population size. The latter two components are quantitative. In a test case, the methodology was used to analyze data for six bird species and three bat species. Components of the methodology are based on simplifying assumptions and require information that, for many species, may be sparse or unreliable or may require further study. These assumptions should be carefully considered when using outputs from the methodology. Increases in the quality of data for fatalities from collisions with wind turbines, species distributions, abundance, and demography will likely improve results for uses of the methodology. The methodology’s design identifies and prioritizes a subset of the bird and bat species that may experience population-level impacts from collisions with wind turbines, both currently and from future wind energy development in the United States. Results of an assessment using this methodology could focus future research to improve our understanding of those impacts and to guide avoidance and minimization strategies. In addition, this methodology can be used to identify species for more intensive demographic modeling or to highlight those species that may not require any additional research because effects of wind energy development on their populations are projected to be small. The effects of wind energy facilities on nine unidentified species used in the test case described in this report have not been assessed. Their data were simply used to show the application of the methodology to real-world data and the types of outputs it would produce.

Scientific Investigations Report↗
USGS2021

Research to inform Caltrans best management practices for reptile and amphibian road crossings

In October of 2014, the U.S. Geological Survey (USGS) began a 5-year project to conduct research to inform Best Management Practices (BMPs) for amphibian and reptile crossing and barrier systems in California. To inform future conservation and transportation planning, this project involved identification of species at highest risk of negative road impacts, creation of geodatabase and spatial mapping tools that crosswalk with California Essential Habitat Connectivity Planning, and field research to address information gaps in the efficacy of reptile and amphibian passage and barrier systems. Per the agreement with California Department of Transportation (Caltrans; agreement 65A0553), this project was part of a broader collaborative effort between the Western Transportation Institute (WTI) of Montana State University and USGS Western Ecological Research Center (WERC). As part of this broader project, WTI conducted a worldwide literature review and gap analysis and produced the BMP manual for herpetofauna in California. WTI and USGS were contracted separately although we worked closely together throughout this broader effort and each brought particular expertise to the project. WTI has expertise in highways, the attributes of the highway environment, and has broad international experience with road ecology and herpetofauna connectivity systems worldwide. USGS WERC has expertise with California amphibian and reptile species and their ecology, study design and implementation, as well as expertise in landscape connectivity and road ecology.

California↗
USGS1992

Map showing sediment isopachs in the deep-sea basins of the Pacific continental margin, Point Conception to Point Loma

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. index map for I-2089-A See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1992

Map showing depth to basement in the deep-sea basins of the Pacific continental margin, Point Conception to Point Loma

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. index map for I-2089-A See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1993

Map showing sediment isopachs in the deep-sea basins of the Pacific continental margin, Cape Mendocino to Point Conception

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1993

Map showing depth to basement in the deep-sea basins of the Pacific continental margin, Cape Mendocino to Point Conception

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1993

Map showing sediment isopachs in the deep-sea basins of the Pacific Continental Margin, Strait of Juan de Fuca to Cape Mendocino

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1993

Map showing depth to basement in the deep-sea basins of the Pacific continental margin, Strait of Juan de Fuca to Cape Mendocino

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1987

Colorado Plateau

Field studies in the Colorado Plateau occupy an honored place in the development of geomorphic theory. The purpose of this chapter is to briefly review the foundational, regional, and process-oriented studies in the region, and to provide a review of promising threads of inquiry set in a context of more than a century of geomorphologic research in the region. The Colorado Plateau has sharply defined boundaries that separate it from neighboring geomorphic provinces (Fig. 1; for details see Thornbury, 1965). On the west, faults and the perimeters of volcanic plateaus mark the boundary between the Colorado Plateau and the Basin and Range Province. The boundary extends across the southern edge of the plateau where it is less radically defined, but is nonetheless visible on the surface in the form of an uplifted edge of sedimentary rocks known as the Mogollon Rim, which extends from northwest Arizona diagonally into north-central New Mexico. The eastern and northern boundaries are delineated by the contact between sedimentary rocks and upthrust or folded crystalline rocks of the Rocky Mountains. The plateau is a definable tectonic unit relatively easily separated from other provinces, but it shows considerable internal variation (Fig. 1; for details see Hunt, 1974a). The interior of the kidney-shaped Colorado Plateau Province reveals a series of subsections that depend on geologic and geomorphologic definition. The centrally located Canyon Lands Section is dominated by gently folded sedimentary rocks, while the western High Plateaus Section reveals widespread accumulations of volcanic materials.

Arizona, Colorado, New Mexico, Utah↗
USGS2023

Development of a volcanic risk management system at Mount St. Helens—1980 to present

Here, we review volcanic risk management at Mount St. Helens from the perspective of the US Geological Survey’s (USGS) experience over the four decades since its 18 May 1980 climactic eruption. Prior to 1980, volcano monitoring, multidisciplinary eruption forecasting, and interagency coordination for eruption response were new to the Cascade Range. A Mount St. Helens volcano hazards assessment had recently been published and volcanic crisis response capabilities tested during 1975 thermal unrest at nearby Mount Baker. Volcanic unrest began in March 1980, accelerating the rate of advance of volcano monitoring, prompting coordinated eruption forecasting and hazards communication, and motivating emergency response planning. The destruction caused by the 18 May 1980 eruption led to an enormous emergency response effort and prompted extensive coordination and planning for continuing eruptive activity. Eruptions continued with pulsatory dome growth and explosive eruptions over the following 6 years and with transport of sediment downstream over many more. In response, USGS scientists and their partners expanded their staffing, deployed new instruments, developed new tools (including the first use of a volcanic event tree) for eruption forecasting, and created new pathways for agency internal and external communication. Involvement in the Mount St. Helens response motivated the establishment of response measures at other Cascade Range volcanoes. Since assembly during the early and mid-1990s, volcano hazard working groups continue to unite scientists, emergency and land managers, tribal nations, and community leaders in common cause for the promotion of risk reduction. By the onset of renewed volcanic activity in 2004, these new systems enabled a more efficient response that was greatly facilitated by the participation of organizations within volcano hazard working groups. Although the magnitude of the 2004 eruptive sequence was much smaller than that of 1980, a new challenge emerged focused on hazard communication demands. Since 2008, our understanding of Mount St. Helens volcanic system has improved, helping us refine hazard assessments and eruption forecasts. Some professions have worked independently to apply the Mount St. Helens story to their products and services. Planning meetings and working group activities fortify partnerships among information disseminators, policy and decision-makers, scientists, and communities. We call the sum of these pieces the Volcanic Risk Management System (VRMS). In its most robust form, the VRMS encompasses effective production and coordinated exchange of volcano hazards and risk information among all interested parties.

Washington↗
USGS2002

Identifying a large landslide with small displacements in a zone of coseismic tectonic deformation; the Villa Del Monte landslide triggered by the 1989 Loma Prieta, California, earthquake

The Villa Del Monte landslide was one of 20 large and complex landslides triggered by the 1989 Loma Prieta , California , earthquake in a zone of pervasive coseismic ground cracking near the fault rupture. The landslide was approximately 980 m long, 870 m wide, and encompassed an area of approximately 68 ha. Drilling data suggested that movement may have extended to depths as great as 85 m below the ground surface. Even though the landslide moved <1 m, it caused substantial damage to numerous dwellings and other structures, primarily as a result of differential displacements and internal Assuring. Surface cracks, scarps, and compression features delineating the Villa Del Monte landslide were discontinuous, probably because coseismic displacements were small ; such discontinuous features were also characteristic of the other large , coseismic landslides in the area, which also moved only short distances during the earthquake . Because features marking landslide boundaries were discontinuous and because other types of coseismic ground cracks were widespread in the area, identification of the landslides required detailed mapping and analysis. Recognition that landslides such as that at Villa Del Monte may occur near earthquake-generating fault ruptures should aid in future hazard evaluations of areas along active faults.

Reviews in Engineering Geology↗
USGS2015

National Earthquake Information Center systems overview and integration

Overview The primary mission of the U.S. Geological Survey (USGS) National Earthquake Information Center (NEIC) is comprehensive global earthquake monitoring (M4.5 or larger) and complete seismic monitoring of the United States for all significant earthquakes (M3.0 or larger or felt). In recent years, the NEIC has assumed a more prominent role in local and regional seismic monitoring, backup capabilities, and special studies. The NEIC uses numerous scientific algorithms to produce information products for local, national, and international disaster responders; infrastructure corporations (for example, utility providers and insurers); U.S. embassies worldwide; news agencies; national and international earth science research communities; and millions of public users. To support this mission, the NEIC operates a constant service to derive numerous information products as rapidly and accurately as possible. Derived information products and data sets provide a wealth of related earthquake information and include products such as location, magnitude, maps of shaking intensity, moment tensors, phase arrivals, and loss and damage reports. These information products are automatically derived in near real-time and refined over time. Earthquake information products vary from well formatted text files, to binary files, to directories full of many files. A team of analysts, who provide constant coverage, 24 hours a day, seven days a week, 365 days a year, review the acquired data and automatically derived products (1) in near real-time for rapid release and (2) in the weeks following events to produce historical catalogs of global earthquakes in support of scientific research. Data and products are reviewed both in near real-time for rapid release and in the weeks following events to produce historical catalogs of global earthquakes in support of scientific research. At the present time, the NEIC publishes data for approximately 25,000 earthquakes annually. The NEIC software system that supports this service and mission comprises many subsystems. The internals of each subsystem are often complex, but the integration between all of the subsystems is well defined, standardized, and straightforward. This Open-File Report describes the systems&rsquo; integration infrastructure and how all the subsystems fit together. It provides summary views of the system as a whole, along with detailed views of the inputs, outputs, and dependencies for each subsystem. It also outlines the many shared data services that support these subsystems and applications as well as external customers. The NEIC systems-integration effort is ongoing. Additional integration steps, needed to reach our goals, are discussed. It is important to note that this document provides a brief introduction to the work of dozens of software developers and IT specialists, spanning in many cases more than a decade. References to significant amounts of supporting documentation, code, and information are supplied within.

Open-File Report↗