Search USGSSearch

SEARCH · Search USGS

Results for “Information and Technology Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources

Capacity assessment for Earth Monitoring, Analysis, and Prediction (EarthMAP) and future integrated monitoring and predictive science at the U.S. Geological Survey

Executive Summary Managers of our Nation’s resources face unprecedented challenges driven by the convergence of increasing, competing societal demands and a changing climate that affects the stability, vulnerability, and predictability of those resources. To help meet these challenges, the scientific community must take advantage of all available technologies, data, and integrative Earth systems modeling capacity to better inform resource and risk management decisions. This is the overarching goal of the U.S. Geological Survey (USGS) Earth Monitoring, Analysis, and Prediction (EarthMAP) vision: “By 2030, the USGS will deliver well integrated observations and predictions of the future state of natural systems—water, ecosystems, energy, minerals, hazards—at regional and national scales, working primarily with federal, state, and academic partners to develop and operate the capability” (U.S. Geological Survey, 2021). Providing more integrated Earth systems science and actionable information to decision makers, stakeholders, and the public requires a better understanding of the depth and distribution of existing capacity (capabilities, tools, and techniques) across the Bureau. Identifying existing capacity is also a critical first step toward gap analysis and targeted investments to increase capacity over time. The USGS formed a Capacity Assessment Team (CAT) and charged it with (1) conducting a Request for Information (RFI) to identify existing USGS expertise and activities supportive of integrated and predictive science to inform decision making, (2) developing a strategy and proof-of-concept for a continuously updated capacity assessment capability, and (3) identifying lessons learned to inform development of best practices for future capacity assessment efforts. The RFI took the form of a survey, with content guided by the science and technology needs identified in a USGS report titled “Grand Challenges for Integrated U.S. Geological Survey Science—A Workshop Report” (Jenni and others, 2017). The 44-question survey provided respondents the ability to rate their level of experience with a suite of priority disciplines, analysis and modeling approaches, technologies, and stakeholder engagement strategies and to enter optional narrative text for supporting context. An introductory portion focused on general science capacity assessment, followed by three sections targeting capabilities related to the foundational components of EarthMAP: (1) data and information integration, (2) integrated predictive science, and (3) actionable information. The survey results provided a high-level snapshot of USGS capacity in the targeted areas. Respondents (1,035 individuals) represented approximately 13 percent of the USGS across all mission areas and regions. Seventy-four percent of the respondents held a science-focused position title and the remainder had position titles in information technology, computer science, management, administrative, or other (contractors, volunteers, emeritus, and unknown). To provide greater insight into respondent capabilities and activities, information from the U.S. Department of the Interior and USGS enterprise information systems were used to further characterize topical expertise and organizational associations of survey respondents. To address the ongoing need to assess the Bureau’s capacity to address integrated predictive science priorities, the CAT developed a software-based proof-of-concept called the Integrated Science Assessment Information Database (iSAID) for assembling various information sources together toward making the full extent of USGS capabilities and scientific assets available for routine capacity assessment. This proof-of-concept is intended to serve as a catalyst for further development. The process of implementing the EarthMAP capacity assessment survey, analyzing survey responses, and developing the proof-of-concept resulted in lessons learned, findings, and recommendations. Example scenarios throughout the report demonstrate how capacity assessment data can inform science planning. Three overarching findings and recommendations are: (1) Finding: Capacity is limited in some critical disciplines, skills, and technology applications, but “sufficient” depends on the question and the need relative to availability at a given point in time. Recommendation: Develop an on-demand capacity assessment framework that enables rapid identification and evaluation of existing and available expertise to support decision needs as they arise. (2) Finding: Institutional barriers and lack of awareness constrain the ability of USGS staff to adopt new technologies, collaborate across administrative boundaries, and deliver actionable information to stakeholders in a timely manner. However, these barriers are not universally experienced. Recommendation: Pursue more targeted inquiries to clarify which institutional barriers are obstructing the adoption of new technologies and approaches or the sharing of expertise and equipment across organizational and regional boundaries. These inquiries should inform USGS leadership, mission areas, and regions whether policies can be revised or whether a lack of understanding is creating perceived obstacles. Highlight cases when staff have successfully adopted new technologies and approaches to advance EarthMAP priorities and provide actionable information in a timely manner to spread awareness of how perceived obstacles can be navigated and overcome when appropriate. (3) Finding: Examples of people and projects integrating across disciplines and scales and applying advanced approaches to meet complex stakeholder needs exist. Such examples provide transfer value across the spectrum from approach to decision making. Many projects, already underway, appear to meet elements of the EarthMAP vision, and the USGS has people who can provide leadership in multiple types of specific integrated science efforts. Recommendation: Use these findings as a starting point for near-term strategic planning for integrated science. Highlight, incentivize, and build on existing interdisciplinary predictive science and information delivery activities across the USGS to advance toward further realization of an EarthMAP capacity. The CAT efforts to develop and assess existing USGS capacity to advance the EarthMAP vision revealed a fundamental challenge for not only this effort but any effort to assess existing capacity: A considerable amount of thought, time, and effort is required to survey and assess capabilities and tools available to support a given need, yet best results are still likely to provide an incomplete assessment. To better meet the frequent need to assess capabilities, tools, products, and projects that address an expressed strategic priority, the CAT proposes the concept of an on-demand capacity assessment framework supported by a software package that dynamically pulls and integrates information from existing USGS information systems and public domain registries. Although existing USGS enterprise information systems currently lack the structure, cross-system consistency, interoperability, and stability to support a continuously updated capacity assessment capability, we identify reasonable near-term steps to improve the utility of information gathered on expertise and project capacity and to improve the consistency and completeness of information and the ability of USGS systems to share that information. The ability to search and characterize this information will make future assessments of capacity faster, more complete, more efficient, and more targeted. This approach would grow the Bureau’s capacity knowledge over time, iteratively improving the ability to access, leverage, and synthesize existing capabilities and assets as well as identify and fill critical gaps. The greatest promise for developing integrated science could lie in linking across existing projects and expertise to create a multi-project capacity for addressing large, complex environmental issues.

Open-File Report

Information technology challenges of biodiversity and ecosystems informatics

Computer scientists, biologists, and natural resource managers recently met to examine the prospects for advancing computer science and information technology research by focusing on the complex and often-unique challenges found in the biodiversity and ecosystem domain. The workshop and its final report reveal that the biodiversity and ecosystem sciences are fundamentally information sciences and often address problems having distinctive attributes of scale and socio-technical complexity. The paper provides an overview of the emerging field of biodiversity and ecosystem informatics and demonstrates how the demands of biodiversity and ecosystem research can advance our understanding and use of information technologies.

Information Systems

Selected field parameters from streams and preliminary analytical data from water and macroinvertebrate samples, Central Colorado Assessment Project, task, 2004 and 2005

The U.S. Geological Survey (USGS) Central Colorado Assessment Project (CCAP) began in October 2003 and is planned to last through September 2008. One major goal of this project is to compare the relationships between surface-water chemistry and aquatic fauna in mined and unmined areas. To accomplish this goal, we are conducting a State-scale reconnaissance sampling program, in which we are collecting water and macroinvertebrate samples. Selected results from the first two years of project analyses are reported here. We plan to develop statistical models and use geographic information system (GIS) technology to quantify the relationships between ecological indicators of metal contamination in Rocky Mountain streams and water quality, landscape and land-use characteristics (for example, mine density, geology, geomorphology, vegetation, topography). Our research will test the hypothesis that physicochemical variables and ecological responses to metal concentrations in stream water in Rocky Mountain streams are ultimately determined largely by historical land uses.

Colorado

Water Resources Research Act Program—Current status, development opportunities, and priorities for 2020–30

The U.S. Geological Survey (USGS) Water Resources Research Act (WRRA) Program connects our Nation’s academic capital to the USGS mission by delivering university-based research, outreach, and education services to our citizens. For more than 50 years, the WRRA Program has invested in local, State, and regionally focused water-related research; information and technology transfer; and workforce development through student training and professional internships. This report presents a long-term (10-year) vision for the WRRA Program that the USGS Water Resources Mission Area and 54 State water resources research institutes (or centers) can use to continue this Federal-State partnership to help solve the Nation’s water problems.

Circular

Colocating artificial intelligence data centers with energy infrastructure on Federal public lands—A science synthesis and spatial analysis to inform decision making

Executive Summary Artificial intelligence (AI) is rapidly transforming industries and economies, creating an urgent need to strategically plan for the energy and infrastructure required to support increasing AI use. U.S. Federal agencies and bureaus have been directed to explore ways to accelerate permitting, development, and deployment of energy resources and AI technologies, including encouraging the colocation of energy infrastructure and data centers. To inform these initiatives, this report synthesizes relevant scientific information and presents a spatial analysis of existing energy infrastructure and data centers on or near U.S. Federal public lands managed by the Bureau of Land Management (BLM). The purpose of this science synthesis and spatial analysis is to provide the BLM with foundational information for considering potential colocation of data centers with energy infrastructure on Federal public lands to support evidence-based decisions. Additionally, this report provides insight into current (2025) and potential future energy demands by providing projections of a range of potential future environmental conditions relevant to maintaining industry-recommended cooling temperature standards necessary for efficient data center operations. As a part of this effort, a rapid response literature review was conducted of the best available science on the topic of data center development and energy infrastructure in July–August 2025, supplemented by additional resources recommended by U.S. Federal agency and bureau subject matter experts (hereafter experts; including the U.S. Department of Energy National Laboratory of the Rockies) and peer reviewers. To better understand current conditions relevant to AI data center development, a spatial analysis was conducted across Alaska and 11 States in the Western United States, Arizona, California, Colorado, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, and Wyoming, all of which contain extensive BLM-managed surface lands (hereafter referred to as “BLM lands”) that could be considered for the colocation of energy infrastructure and AI data centers. This effort identified BLM lands within 10 miles of existing transmission lines, consistent with methods used in previous BLM programmatic environmental impact statements. This report describes the types of data centers operating within the United States, which vary in ownership, size, technology, and proximity to end users. This report then outlines the primary considerations of data center development, including reliable energy supply, natural resources (such as water availability to support cooling requirements), and relevant policy and regulatory considerations. Energy supply considerations are pivotal for data center operation. Between 2014 and 2018, data centers in the United States accounted for nearly 2 percent of the Nation’s total electricity consumption, and data center energy consumption is projected to increase from 2 to 6.7–12 percent of total U.S. electricity use by 2028. These energy requirements necessitate careful consideration of energy supply when considering potentially suitable locations for data center development. Experts anticipate that an increase in renewable energy generation will likely support most potential future power demand needs, including for data centers, followed by increases in natural gas, nuclear, and geothermal energy production. Additional capacity in the form of battery storage will likely not generate electricity, but may improve the reliability and flexibility of supply, helping to ensure that growing data center loads can be met. However, the U.S. Department of Energy estimates that the United States will need, on average, 57 percent more energy transmission infrastructure by 2035 to account for the growing power demand introduced by development such as data centers. Cooling server equipment in data centers requires large amounts of electricity and water, and this demand can be exacerbated by hot and humid conditions. Energy efficient water-based cooling technologies may reduce electricity consumption onsite but require more water consumption. This additional water demand has the potential to increase water stress and competition with other users. As such, developing data centers will likely need a thorough assessment of current and potential future water availability, as well as consideration of how water demand may change across other sectors. Data center development involves policy and regulatory considerations, as projects must undergo environmental review and authorization processes that can take 18–24 months. Coordinating these environmental reviews and authorizations with other energy development projects, such as building new transmission lines, may cause additional delays. Recent efforts by the U.S. Department of Energy and U.S. Department of the Interior aim to expedite environmental reviews and authorizations and improve coordination across agencies. The spatial analysis identified 771 existing AI data centers and more than 3,300 power plants. The spatial analysis found that 6 percent of AI data centers and 22 percent of power plants in the Western United States were on or within 1 mile of BLM lands, and California had the largest number of facilities. Most existing AI data centers were near high-voltage transmission lines and close to power plants, supporting efficient energy delivery. More than 90,000,000 acres of BLM lands were within 10 miles of existing high-voltage transmission lines, representing 38 percent of BLM lands in the study area. Available transmission infrastructure and the overlap with BLM lands varied by State, and Alaska had limited overlap compared to the rest of the Western United States. To operate most efficiently, data center temperatures must be at or below 80.6 degrees Fahrenheit. This analysis of future temperature and precipitation projections indicated increasing cooling demands for data centers, particularly in Arizona, California, and Nevada, where rising temperatures are expected to increase energy and operational costs while potentially stressing current regional electrical grid infrastructure. This report highlights relevant energy supply, natural resources, and regulatory considerations for data center development on BLM lands. This report does not provide a comprehensive ecological, regulatory, land suitability, or permitting analysis. The factors described here are contextual considerations only and are not intended to identify, rank, quantify, or recommend optimal areas for data center colocation. This spatial analysis focused solely on energy considerations relevant to data centers and did not consider water availability, critical habitats, BLM National Conservation Lands, areas of cultural or historical significance, and other sensitive resources. These topics are recognized as critical but were not within the scope of this science synthesis and spatial analysis.

Scientific Investigations Report

Preliminary observations of the April 5th, 2024, Mw4.8 New Jersey earthquake

On 5 April 2024, 10:23 a.m. local time, a moment magnitude 4.8 earthquake struck Tewksbury Township, New Jersey, about 65 km west of New York City. Millions of people from Virginia to Maine and beyond felt the ground shaking, resulting in the largest number (>180,000) of U.S. Geological Survey (USGS) “Did You Feel It?” reports of any earthquake. A team deployed by the Geotechnical Extreme Events Reconnaissance Association and the National Institute of Standards and Technology documented structural and nonstructural damage, including substantial damage to a historic masonry building in Lebanon, New Jersey. The USGS National Earthquake Information Center reported a focal depth of about 5 km, consistent with a lack of signal in Interferometric Synthetic Aperture Radar data. The focal mechanism solution is strike slip with a substantial thrust component. Neither mechanism’s nodal plane is parallel to the primary northeast trend of geologic discontinuities and mapped faults in the region, including the Ramapo fault. However, many of the relocated aftershocks, for which locations were augmented by temporary seismic deployments, form a cluster that parallels the general northeast trend of the faults. The aftershocks lie near the Tewksbury fault, north of the Ramapo fault.

New Jersey

A guide to the proper selection and use of federally approved sediment and water-quality samplers

The Federal Interagency Sedimentation Project (FISP) was created in 1939 to unify and standardize the research and development activities of Federal agencies involved in fluvial sediment studies1,2. Research and development conducted by the FISP originally focused on hydraulic and mechanical aspects of sediment sampling. The mission of the FISP has expanded to provide, identify, and evaluate tools and techniques for accurate, standardized, calibrated, cost-efficient, and safe measurement and analysis of sediment properties and transport. FISP activities focus on measurement and analysis of suspended sediment, bedload sediment, bed material, bed topography, adsorbed constituents, sediment characteristics, and water quality. Sponsoring agencies and the public gain a distinct advantage from the cooperative action that leads to common standards, methods, equipment, and procedures for the measurement and characterization of sediment. As interest in the health of rivers and streams increases3, and new water-quality regulations4 are promulgated, interest in sediment and water-quality sampling equipment and technologies has increased. While much information on the subject exists, a comprehensive summary document of sediment sampling equipment and technology is lacking. This report seeks to provide such a summary.

Open-File Report

BIA interpretation techniques for vegetation mapping using thematic mapper false color composites (interim report for San Carlos Reservation)

The Bureau of Indian Affairs (BIA) is responsible for the natural resource management of approximately 52 million acres of Trust lands in the contiguous United States. The lands are distributed in a "patchwork" fashion throughout the country. Management responsibilities on these areas include: minerals, range, timber, fish and wildlife, agricultural, cultural, and archaeological resources. In an age of decreasing natural resources and increasing natural resource values, effective multiple resource management is critical. BIA has adopted a "systems approach" to natural resource management which utilizes Geographic Information System (GIS) technology. The GIS encompasses a continuum of spatial and relational data elements, and included functional capabilities such as: data collection, data entry, data base development, data analysis, data base management, display, and report generalization. In support of database development activities, BIA and BLM/TGS conducted a cooperative effort to investigate the potential of 1:100,000 scale Thematic Mapper (TM) False Color Composites (FCCs) for providing vegetation information suitable for input to the GIS and to later be incorporated as a generalized Bureau wide land cover map. Land cover information is critical as the majority of reservations currently have no land cover information in either map or digital form. This poster outlines an approach which includes the manual interpretation of land cover using TM FCCs, the digitizing of interpreted polygons, and the editing of digital data, used upon ground truthing exercises. An efficient and cost-effective methodology for generating large area land cover information is illustrated for the Mineral Strip area on the San Carlos Indian Reservation in Arizona. Techniques which capitalize on the knowledge of the local natural resources professionals, while minimizing machine processing requirements, are suggested.

Arizona

The Virtual Data Center Tagged-Format Tool: Introduction and executive summary

This Report introduces and summarizes the new Virtual Data Center (VDC) Tagged Format (VTF) Tool, which was developed by a diverse group of seismologists, earthquake engineers, and information technology professionals for internal use by the COSMOS VDC and other interested parties for the exchange, archiving, and analysis of earthquake strong-ground-motion data.

Open-File Report

Geologic framework of the San Juan structural basin of New Mexico, Colorado, Arizona, and Utah, with emphasis on Triassic through Tertiary rocks

The San Juan Basin Regional Aquifer-System Analysis began in 1984. This report describes rocks of Triassic through Tertiary age in the basin and also describes the regional geologic and stratigraphic framework of the basin's multilayered aquifer system. Maps showing altitude of top, depth to top, and thickness of major geologic units were prepared using geographic information system technology. Results presented form the basis for ground-water flow modeling and geochemical studies of the basin.

Professional Paper

A linked GeoData map for enabling information access

Overview The Geospatial Semantic Web (GSW) is an emerging technology that uses the Internet for more effective knowledge engineering and information extraction. Among the aims of the GSW are to structure the semantic specifications of data to reduce ambiguity and to link those data more efficiently. The data are stored as triples, the basic data unit in graph databases, which are similar to the vector data model of geographic information systems (GIS); that is, a node-edge-node model that forms a graph of semantically related information. The GSW is supported by emerging technologies such as linked geospatial data, described below, that enable it to store and manage geographical data that require new cartographic methods for visualization. This report describes a map that can interact with linked geospatial data using a simulation of a data query approach called the browsable graph to find information that is semantically related to a subject of interest, visualized using the Data Driven Documents (D3) library. Such a semantically enabled map functions as a map knowledge base (MKB) (Varanka and Usery, 2017). A MKB differs from a database in an important way. The central element of a triple, alternatively called the edge or property, is composed of a logic formalization that structures the relation between the first and third parts, the nodes or objects. Node-edge-node represents the graphic form of the triple, and the subject-property-object terms represent the data structure. Object classes connect to build a federated graph, similar to a network in visual form. Because the triple property is a logical statement (a predicate), the data graph represents logical propositions or assertions accepted to be true about the subject matter. These logical formalizations can be manipulated to calculate new triples, representing inferred logical assertions, from the existing data. To demonstrate a MKB system, a technical proof-of-concept is developed that uses geographically attributed Resource Description Framework (RDF) serializations of linked data for mapping. The proof-of-concept focuses on accessing triple data from visual elements of a geographic map as the interface to the MKB. The map interface is embedded with other essential functions such as SPARQL Protocol and RDF Query Language (SPARQL) data query endpoint services and reasoning capabilities of Apache Marmotta (Apache Software Foundation, 2017). An RDF database of the Geographic Names Information System (GNIS), which contains official names of domestic feature in the United States, was linked to a county data layer from The National Map of the U.S. Geological Survey. The county data are part of a broader Government Units theme offered to the public as Esri shapefiles. The shapefile used to draw the map itself was converted to a geographic-oriented JavaScript Object Notation (JSON) (GeoJSON) format and linked through various properties with a linked geodata version of the GNIS database called “GNIS–LD” (Butler and others, 2016; B. Regalia and others, University of California-Santa Barbara, written commun., 2017). The GNIS–LD files originated in Terse RDF Triple Language (Turtle) format but were converted to a JSON format specialized in linked data, “JSON–LD” (Beckett and Berners-Lee, 2011; Sorny and others, 2014). The GNIS–LD database is composed of roughly three predominant triple data graphs: Features, Names, and History. The graphs include a set of namespace prefixes used by each of the attributes. Predefining the prefixes made the conversion to the JSON–LD format simple to complete because Turtle and JSON–LD are variant specifications of the basic RDF concept. To convert a shapefile into GeoJSON format to capture the geospatial coordinate geometry objects, an online converter, Mapshaper, was used (Bloch, 2013). To convert the Turtle files, a custom converter written in Java reconstructs the files by parsing each grouping of attributes belonging to one subject and pasting the data into a new file that follows the syntax of JSON–LD. Additionally, the Features file contained its own set of geometries, which was exported into a separate JSON–LD file along with its elevation value to form a fourth file, named “features-geo.json.” Extracted data from external files can be represented in HyperText Markup Language (HTML) path objects. The goal was to import multiple JSON–LD files using this approach.

Open-File Report

Model documentation for relations between continuous real-time and discrete water-quality constituents in Indian Creek, Johnson County, Kansas, June 2004 through May 2013

Johnson County is the fastest growing county in Kansas, with a population of about 560,000 people in 2012. Urban growth and development can have substantial effects on water quality, and streams in Johnson County are affected by nonpoint-source pollutants from stormwater runoff and point-source discharges such as municipal wastewater effluent. Understanding of current (2014) water-quality conditions and the effects of urbanization is critical for the protection and remediation of aquatic resources in Johnson County, Kansas and downstream reaches located elsewhere. The Indian Creek Basin is 194 square kilometers and includes parts of Johnson County, Kansas and Jackson County, Missouri. Approximately 86 percent of the Indian Creek Basin is located in Johnson County, Kansas. The U.S. Geological Survey, in cooperation with Johnson County Wastewater, operated a series of six continuous real-time water-quality monitoring stations in the Indian Creek Basin during June 2011 through May 2013; one of these sites has been operating since February 2004. Five monitoring sites were located on Indian Creek and one site was located on Tomahawk Creek. The purpose of this report is to document regression models that establish relations between continuously measured water-quality properties and discretely collected water-quality constituents. Continuously measured water-quality properties include streamflow, specific conductance, pH, water temperature, dissolved oxygen, turbidity, and nitrate. Discrete water-quality samples were collected during June 2011 through May 2013 at five new sites and June 2004 through May 2013 at a long-term site and analyzed for sediment, nutrients, bacteria, and other water-quality constituents. Regression models were developed to establish relations between discretely sampled constituent concentrations and continuously measured physical properties to estimate concentrations of those constituents of interest that are not easily measured in real time because of limitations in sensor technology and fiscal constraints. Regression models for 28 water-quality constituents were developed and documented. The water-quality information in this report is important to Johnson County Wastewater because it allows the concentrations of many potential pollutants of interest, including nutrients and sediment, to be estimated in real time and characterized during conditions and time scales that would not be possible otherwise.

Kansas

U.S. Geological Survey energy and wildlife research annual report for 2018

USGS scientists provide scientific information and options that land and resource managers and private industries can use to make decisions regarding the development of energy resources while protecting the health of ecosystems. Studies focus on delivering information to avoid, minimize, or mitigate the impacts of energy infrastructure on fish and wildlife. USGS scientists are currently developing mapping tools and models that identify areas of biological strengths and weaknesses or high- and low-quality habitat and can identify opportunities for conservation—areas of high-quality habitat where energy-generating potential is low—and areas of potential risk—areas of high-quality habitat where energy-generating potential is high. These tools can assist resource managers and the industry concerning siting of energy development and selection of off-site mitigation areas. Scientific efforts, such as these, further the understanding of impacts related to energy development and create workable solutions. The three goals guiding USGS activities related to the interactions between wildlife and energy development are to understand risks by identifying when, where, and how fish and wildlife share space with energy facilities, measure direct and indirect impacts to species, and inform feasible and cost-effective solutions to minimize impacts through technological fixes, management, and mitigation.

Circular

Functional requirements of computer systems for the U.S. Geological Survey, Water Resources Division, 1988-97

Investigating the occurrence, quantity, quality, distribution, and movement of the Nation 's water resources is the principal mission of the U.S. Geological Survey 's Water Resources Division. Reports of these investigations are published and available to the public. To accomplish this mission, the Division requires substantial computer technology to process, store, and analyze data from more than 57,000 hydrologic sites. The Division 's computer resources are organized through the Distributed Information System Program Office that manages the nationwide network of computers. The contract that provides the major computer components for the Water Resources Division 's Distributed information System expires in 1991. Five work groups were organized to collect the information needed to procure a new generation of computer systems for the U. S. Geological Survey, Water Resources Division. Each group was assigned a major Division activity and asked to describe its functional requirements of computer systems for the next decade. The work groups and major activities are: (1) hydrologic information; (2) hydrologic applications; (3) geographic information systems; (4) reports and electronic publishing; and (5) administrative. The work groups identified 42 functions and described their functional requirements for 1988, 1992, and 1997. A few new functions such as Decision Support Systems and Executive Information Systems, were identified, but most are the same as performed today. Although the number of functions will remain about the same, steady growth in the size, complexity, and frequency of many functions is predicted for the next decade. No compensating increase in the Division 's staff is anticipated during this period. To handle the increased workload and perform these functions, new approaches will be developed that use advanced computer technology. The advanced technology is required in a unified, tightly coupled system that will support all functions simultaneously. The new approaches and expanded use of computers will require substantial increases in the quantity and sophistication of the Division 's computer resources. The requirements presented in this report will be used to develop technical specifications that describe the computer resources needed during the 1990's. (USGS)

Open-File Report

Tillage practices in the conterminous United States, 1989-2004: Datasets aggregated by watershed

This report documents the methods used to aggregate county-level tillage practices to the 8-digit hydrologic unit (HU) watershed. The original county-level data were collected by the Conservation Technology Information Center (CTIC). The CTIC collects tillage data by conducting surveys about tillage systems for all counties in the United States. Tillage systems include three types of conservation tillage (no-till, ridge-till, and mulch-till), reduced tillage, and intensive tillage. Total planted acreage for each tillage practice for each crop grown is reported to the CTIC. The dataset includes total planted acreage by tillage type for selected crops (corn, cotton, grain sorghum, soybeans, fallow, forage, newly established permanent pasture, spring and fall seeded small grains, and 'other' crops) for 1989-2004. Two tabular datasets, based on the 1992 enhanced and 2001 National Land Cover Data (NLCD), are provided as part of this report and include the land-cover area-weighted interpolation and aggregation of acreage for each tillage practice in each 8-digit HU watershed in the conterminous United States for each crop. Watershed aggregations were done by overlying the 8-digit HU polygons with a raster of county boundaries and a raster of either the enhanced 1992 or the 2001 NLCD for cultivated land to derive a county/land-cover area weighting factor. The weighting factor then was applied to the county-level tillage data for the counties within each 8-digit HU and summed to yield the total acreage of each tillage type within each 8-digit HU watershed.

Conterminous United States

USGS Capabilities to Study the Impacts of Drought and Climate Change in the Southeastern United States

In the Southeast, U.S. Geological Survey (USGS) scientists are researching issues through technical studies of water availability and quality, geologic processes (marine, coastal, and terrestrial), geographic complexity, and biological resources. The USGS is prepared to tackle multifaceted questions associated with global climate change and resulting weather patterns such as drought through expert scientific skill, innovative research approaches, and accurate information technology.

Fact Sheet