Search USGS⌕ Search

SEARCH · Search USGS

Results for “Gulf Crossings”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources
USGS2008

EAARL coastal topography - Northern Gulf of Mexico

These remotely sensed, geographically referenced elevation measurements of Lidar-derived coastal topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. One objective of this research is to create techniques to survey areas for the purposes of geomorphic change studies following major storm events. The USGS Coastal and Marine Geology Program's National Assessment of Coastal Change Hazards project is a multi-year undertaking to identify and quantify the vulnerability of U.S. shorelines to coastal change hazards such as effects of severe storms, sea-level rise, and shoreline erosion and retreat. Airborne Lidar surveys conducted during periods of calm weather are compared to surveys collected following extreme storms in order to quantify the resulting coastal change. Other applications of high-resolution topography include habitat mapping, ecological monitoring, volumetric change detection, and event assessment. The purpose of this project is to provide highly detailed and accurate datasets of the northern Gulf of Mexico coastal areas, acquired on September 19, 2004, immediately following Hurricane Ivan. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Airborne Advanced Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532 nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking RGB (red-green-blue) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers and an integrated miniature digital inertial measurement unit which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system on September 19, 2004. The survey resulted in the acquisition of 3.2 gigabytes of data. The data were processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for pre-survey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of 'last return' elevations.

Alabama, Florida, Mississippi↗
USGS2001

Surficial geology of the lower Comb Wash, San Juan County, Utah

The surficial geologic map of lower Comb Wash was produced as part of a master’s thesis for Northern Arizona University Quaternary Sciences program. The map area includes the portion of the Comb Wash alluvial valley between Highway 163 and Highway 95 on the Colorado Plateau in southeastern Utah. The late Quaternary geology of this part of the Colorado Plateau had not previously been mapped in adequate detail. The geologic information in this report will be useful for biological studies, land management and range management for federal, state and private industries. Comb Wash is a south flowing ephemeral tributary of the San Juan River, flanked to the east by Comb Ridge and to the west by Cedar Mesa (Figure 1). The nearest settlement is Bluff, about 7 km to the east of the area. Elevations range from 1951 m where Highway 95 crosses Comb Wash to 1291 m at the confluence with the San Juan River. Primary vehicle access to lower Comb Wash is provided by a well-maintained dirt road that parallels the active channel of Comb Wash between Highway 163 and Highway 95. For much of the year this road can be traversed without the aid of four-wheel drive. However, during inclement weather such as rain or snow the road becomes treacherous even with four-wheel drive. The Comb Wash watershed is public land managed by the Bureau of Land management (BLM) office in Monticello, Utah. The semi-arid climate of Comb Wash and the surrounding area is typical of the Great Basin Desert. Temperature in Bluff, Utah ranges from a minimum of –8° C in January to a maximum of 35° C in July with a mean annual temperature of 9.8° C (U.S. Department of Commerce, 1999). The difference between day and nighttime temperatures is as great as 20° C. Between 1928 and 1998, annual rainfall in Bluff averaged 178 mm per year (U.S. Department of Commerce, 1999). Annual rainfall in Comb Wash averaged 240 mm per year from 1991 to 1999 while Bluff received an average of 193 mm for the same 8 year period. Most precipitation is monsoonal, convective storms that bring moisture from the Gulf of Mexico beginning in early July and ending by October. Large frontal storms during December and January are responsible for most winter precipitation (Figure 2). The record from U.S. Geological Survey gauging station number 09379000 operated by the BLM from 1959 through 1968 indicates that Comb Wash flows in direct response to precipitation events. Most daily discharge and peak events occur in late July through September, coinciding with high intensity monsoon thunderstorms. Comb Wash supports a variety of vegetation typical of the Great Basin Desert and the northern desert shrub zone as described by Fowler and Koch (1982). On the lower alluvial terraces, bushes and shrubs dominate the vegetation, including: sagebrush (Artemesia tridentata), rabbitbrush (Chrysothamnus nauseosus), fourwing saltbush (Atriplex canescens), winterfat (Eurotia lanata), greasewood (Sarcobatus vermiculatus), and shadscale (Atriplex concertifolia). Juniper trees (Juniperus osteosperma) can be found on the rocky colluvial slopes near Comb Ridge and on the higher terrace near Cedar Mesa. The floodplain contains an abundance of riparian vegetation including cottonwood (Populus fremontii), willow (Salix exigua), and tamarisk (Tamarix ramosissima). Tamarisk is one of 7 non-native species present in the lower Comb Wash watershed. At least seven known species of noxious weeds have invaded the watershed, including Bermuda grass (Cynodon dactylon), field bindweed (Convolvulus avensis), Canada thistle (Cirsium arvense), Russian knapweed (Centaurea repens), tamarisk and camel thorn (Alhagi pseudalhagi). Of these, tamarisk or salt-cedar has most aggressively colonized the southwestern United States, including the San Juan watershed. Graf (1978) estimates that since the late 19th century, tamarisk has spread at a rate of 20 km per year. Tamarisk first appeared in Comb Wash during the mid to early 20th century based on photographs taken by Gregory in the early 1900’s (Gregory, 1938).

Utah↗
USGS1995

Geology and hydrology of the Edwards Aquifer in the San Antonio area, Texas

The Edwards aquifer, which is the sole source of water for the city of San Antonio, is one of the most permeable and productive carbonate aquifers in the United States. The aquifer is composed of extensively faulted, fractured, and cavernous limestone and dolomite of Early Cretaceous age lying within the Balcones fault zone a series of normal en echelon strike faults that separate the Edwards Plateau from the Gulf Coastal Plain in south Texas. Along segments of some faults, the entire thickness of the aquifer is displaced vertically, and these faults then act as barriers to downdip ground-water flow. The large porosity and exceptional permeability of the unconfined part of the Edwards aquifer result from the dissolution of limestone by circulating ground water and development of a cavernous network along fractures. The large porosity and permeability of the freshwater part of the confined Edwards aquifer result primarily from dedolomitization. The small permeability of the saline-water part of the confined aquifer is caused by the limited interconnection between the pores in the rock matrix and by the lack of substantial dissolution along fractures. The large transmissivity of the Edwards aquifer is indicated by the hundreds of highyielding wells, small hydraulic gradients, and large spring discharges. The determined transmissivity throughout most of the confined freshwater aquifer ranges from 430,000 to 2,200,000 feet squared per day; the determined transmissivity of the unconfined aquifer generally is less than 430,000 feet squared per day. Faulting causes the aquifer to be highly anisotropic, and simulation indicates anisotropy ratios ranging from 0.0:1 to 1:1. The ground-water-flow system of the Edwards aquifer includes several components. These include a catchment area on the Edwards Plateau where the unconfined aquifer receives direct recharge, an area of confining beds crossed by streams draining the Edwards Plateau, a major recharge area within the Balcones fault zone where streams lose flow directly into the unconfined Edwards aquifer, and the confined Edwards aquifer that consists of the freshwater and salinewater zones. Water entering the Edwards aquifer in the Balcones fault zone moves downdip in a generally southeasterly direction into the confined parts of the aquifer. In the confined aquifer, flow is toward the east and northeast under low hydraulic gradients through fractured, highly transmissive limestone and ultimately discharges at large springs and wells. All of the base flow and some of the storm runoff of streams crossing the recharge area infiltrates to the unconfined aquifer. On the basis of streamflow losses, the average annual recharge for 1934-88 was 635,500 acre-feet. Freshwater discharges from the Edwards aquifer primarily from wells, springs, and seeps. Beginning in 1968, annual discharge from the aquifer has consistently exceeded average annual recharge largely because of a doubling of well pumpage. However, total springflow also increased because of greater-than-average recharge during most years since the late 1960's. The total volume of circulating freshwater in the Edwards aquifer is about 45 million acrefeet. Long-term hydrographs at San Antonio indicate no net decline in ground-water levels during 1911-87; thus, there was no net loss of water from storage in the freshwater zone of the Edwards aquifer during that long-term period, assuming the San Antonio hydrograph represents the entire aquifer. However, short-term changes in water levels result largely from the variability of precipitation as indicated by severe declines during the drought of the late 1940's to middle 1950's and by rises to record highs during the abnormally wet years in the 1970's and 1980's. The principal components of the groundwater budget (recharge, springflow, and pumpage) have varied greatly over 55 years (1934-88) of pertinent hydrologic records. Annual recharge varied from about 44,000 to 2,000,000 acre-feet. Annual springflow varied from about 70,000 acrefeet to about 580,000 acre-feet. Pumpage increased from about 100,000 acre-feet annually in the early 1930's to more than 500,000 acre-feet annually during some years in the 1980's. However, the average annual recharge of 635,500 acrefeet is about equal to the sum of the average annual springflow (359,500 acre-feet) and average annual pumpage (273,000 acre-feet), indicating no longterm decrease in ground-water storage because of springflow and pumpage.

Texas↗
USGS2009

EAARL Topography-Vicksburg National Military Park 2007: First Surface

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first-surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Vicksburg National Military Park in Mississippi, acquired on September 12, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗
USGS2008

EAARL topography - Vicksburg National Military Park 2008: Bare earth

These remotely sensed, geographically referenced elevation measurements of Lidar-derived bare earth (BE) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Vicksburg National Military Park in Mississippi, acquired on March 6, 2008. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Mississippi↗
USGS2009

A fungus disease in fishes of the Gulf of Maine

1. A fungus disease of epidemic proportions was found in the common sea herring (Clupea harengus) throughout the Gulf of Maine. 2. The fungus was also found to infect the common winter flounder (Pseudopleuronectes americanus) and the alewife (Pomobolus pseudoharengus). 3. The causative agent was found to be a species of fungus belonging to the genus Ichthyosporidium Caullery and Mesnil (1905). The specific name is tentatively accepted as hoferi Plehn and Muslow (1911). 4. The organism is believed to be a normal parasite to the herring and reaches epidemic proportions only when certain unknown factors are operative. 5. The causative organism was found in herring preserved in 1926, and it is believed that the epidemic has been increasing in severity since that time. 6. It is believed that such an epidermic,once initiated, increases in severity, reaches a peak, and subsides to a subpatent level. The peak is believed to have been reached in 1931. 7. The life history and effects of the organism in the herring and flounder are described. 8. The herring is believed to acquire the infection by the ingestion of parasites liberated from fish in the same school. 9. The flounder is believed to acquire the infection by the consumption of infected herring. 10. The alewife is believed to acquire the infection by ingestion of the parasite during its infrequent association with the herring. 11. Infection is believed to be established by way of the alimentary canal and, once established, to spread throughout the host by way of the blood stream or the lymphatics. 12. Direct cross infection from the herring to the flounder establishes the theory that the parasites in these two hosts are one and the same organism. 13. Direct cross infection experiments from the herring to the flounder eliminate the necessity of an intermediate host. 14. There is no reason to believe that this parasite is capable of infecting warm-blooded animals.

Maine, New Hampshire, Massachusetts, New Brunswick↗
USGS2008

EAARL topography - Natchez Trace Parkway 2007: First surface

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Natchez Trace Parkway in Mississippi, acquired on September 14, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗
USGS2008

EAARL topography: Jean Lafitte National Historical Park and Preserve 2006

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) and bare earth (BE) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Jean Lafitte National Historical Park and Preserve in Louisiana, acquired on September 22, 2006. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Louisiana↗
USGS2009

EAARL Coastal Topography - Northern Gulf of Mexico, 2007: First surface

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) elevation data were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. The project provides highly detailed and accurate datasets of select barrier islands and peninsular regions of Louisiana, Mississippi, Alabama, and Florida, acquired June 27-30, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Alabama, Mississippi↗
USGS2010

Attributes for NHDPlus Catchments (Version 1.1): Basin Characteristics, 2002

This data set represents basin characteristics, compiled for every catchment in NHDPlus for the conterminous United States. These characteristics are basin shape index, stream density, sinuosity, mean elevation, mean slope, and number of road-stream crossings. The source data sets are the U.S. Environmental Protection Agency's NHDPlus and the U.S. Census Bureau's TIGER/Line Files. The NHDPlus Version 1.1 is an integrated suite of application-ready geospatial datasets that incorporates many of the best features of the National Hydrography Dataset (NHD) and the National Elevation Dataset (NED). The NHDPlus includes a stream network (based on the 1:100,00-scale NHD), improved networking, naming, and value-added attributes (VAAs). NHDPlus also includes elevation-derived catchments (drainage areas) produced using a drainage enforcement technique first widely used in New England, and thus referred to as "the New England Method." This technique involves "burning in" the 1:100,000-scale NHD and when available building "walls" using the National Watershed Boundary Dataset (WBD). The resulting modified digital elevation model (HydroDEM) is used to produce hydrologic derivatives that agree with the NHD and WBD. Over the past two years, an interdisciplinary team from the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agency (USEPA), and contractors, found that this method produces the best quality NHD catchments using an automated process (USEPA, 2007). The NHDPlus dataset is organized by 18 Production Units that cover the conterminous United States. The NHDPlus version 1.1 data are grouped by the U.S. Geologic Survey's Major River Basins (MRBs, Crawford and others, 2006). MRB1, covering the New England and Mid-Atlantic River basins, contains NHDPlus Production Units 1 and 2. MRB2, covering the South Atlantic-Gulf and Tennessee River basins, contains NHDPlus Production Units 3 and 6. MRB3, covering the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins, contains NHDPlus Production Units 4, 5, 7 and 9. MRB4, covering the Missouri River basins, contains NHDPlus Production Units 10-lower and 10-upper. MRB5, covering the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins, contains NHDPlus Production Units 8, 11 and 12. MRB6, covering the Rio Grande, Colorado and Great Basin River basins, contains NHDPlus Production Units 13, 14, 15 and 16. MRB7, covering the Pacific Northwest River basins, contains NHDPlus Production Unit 17. MRB8, covering California River basins, contains NHDPlus Production Unit 18.

Data Series↗
USGS2010

EAARL Coastal Topography-Mississippi and Alabama Barrier Islands, Post-Hurricane Gustav, 2008

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Mississippi and Alabama barrier islands, acquired post-Hurricane Gustav (September 2008 hurricane) on September 8, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2009

EAARL coastal topography — Northern Gulf of Mexico, 2007: Bare earth

These remotely sensed, geographically referenced elevation measurements of Lidar -derived bare earth ( BE ) topography were produced as a collaborative effort between the U.S. Geological Survey ( USGS ), Florida Integrated Science Center ( FISC ), St. Petersburg, FL ; the National Park Service ( NPS ), Gulf Coast Network, Lafayette, LA ; and the National Aeronautics and Space Administration ( NASA ), Wallops Flight Facility, VA . The purpose of this project is to provide highly detailed and accurate datasets of select barrier islands and peninsular regions of Louisiana, Mississippi, Alabama, and Florida, acquired on June 27-30, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar ( EAARL ), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar , a down-looking red-green-blue ( RGB ) digital camera, a high-resolution multi-spectral color infrared ( CIR ) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system and the resulting data were then processed using the Airborne Lidar Processing System ( ALPS ), a custom-built processing system developed in a NASA - USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

northern Gulf of Mexico↗
USGS2013

Application of a hydrodynamic and sediment transport model for guidance of response efforts related to the Deepwater Horizon oil spill in the Northern Gulf of Mexico along the coast of Alabama and Florida

U.S. Geological Survey (USGS) scientists have provided a model-based assessment of transport and deposition of residual Deepwater Horizon oil along the shoreline within the northern Gulf of Mexico in the form of mixtures of sand and weathered oil, known as surface residual balls (SRBs). The results of this USGS research, in combination with results from other components of the overall study, will inform operational decisionmaking. The results will provide guidance for response activities and data collection needs during future oil spills. In May 2012 the U.S. Coast Guard, acting as the Deepwater Horizon Federal on-scene coordinator, chartered an operational science advisory team to provide a science-based review of data collected and to conduct additional directed studies and sampling. The goal was to characterize typical shoreline profiles and morphology in the northern Gulf of Mexico to identify likely sources of residual oil and to evaluate mechanisms whereby reoiling phenomena may be occurring (for example, burial and exhumation and alongshore transport). A steering committee cochaired by British Petroleum Corporation (BP) and the National Oceanic and Atmospheric Administration (NOAA) is overseeing the project and includes State on-scene coordinators from four States (Alabama, Florida, Louisiana, and Mississippi), trustees of the U.S. Department of the Interior (DOI), and representatives from the U.S. Coast Guard. This report presents the results of hydrodynamic and sediment transport models and developed techniques for analyzing potential SRB movement and burial and exhumation along the coastline of Alabama and Florida. Results from these modeling efforts are being used to explain the complexity of reoiling in the nearshore environment and to broaden consideration of the different scenarios and difficulties that are being faced in identifying and removing residual oil. For instance, modeling results suggest that larger SRBs are not, under the most commonly observed low-energy wave conditions, likely to move very far alongshore. This finding suggests that SRBs from one source location may not (outside of storm conditions) be redistributed to other up or down coast locations. This information can guide operational response decisions. In addition, because SRBs are less mobile compared with sand, they are likely to become buried and unburied under normal sand transport processes thereby lengthening the time SRBs may take to move onshore. The rate of onshore movement was not specifically addressed by this study, yet the results resolve the cross-shore domain and cross-shore variations in alongshore transport that are relevant to achieving the primary objectives. Furthermore, during infrequent events (for example, winter storms and severe meteorological events such as Hurricane Isaac of August 2012), energy is shown to be sufficient to move a greater range of SRB sizes and potentially expose and break up submerged oil mats. When SRBs do move alongshore, the models indicate that there are regions that are more conducive to accumulation of SRB material than others. Accumulation can occur where there are reversals and decelerations in alongshore currents and where forces created by shear stress drops below critical thresholds to maintain or initiate SRB movement. In addition, flow and SRB mobility patterns around inlets indicate patterns in hydrodynamic forces that influence redistribution of SRBs and the surface oil that mixed with sediment to form oil mats in the first place.

Alabama;Florida↗
USGS2006

Genetic Considerations for the Restoration of Smooth Cordgrass (Spartina alterniflora) Within Its Native Range

In order to remain viable over many generations, plant populations require the ability to respond adaptively to a changing environment. Such adaptive potential is directly controlled by underlying genetic variation, which can be measured in terms of both heterozygosity at the individual level and clonal, or genotypic diversity at the population level. This report summarizes research relating to the importance of genetic diversity in the restoration of salt marsh smooth cordgrass, Spartina alterniflora, a dominant member of low elevation intertidal marshes throughout the northern Gulf of Mexico and Atlantic Coasts of North America. Recent research has indicated that S. alterniflora is a partially clonal species characterized by the recruitment of seedlings exclusively during the initial colonization phase of population establishment. A major consequence of this finding is that clonal diversity generally peaks rather early in the development of a restored marsh, depending on the rate of natural immigration and/or the clonal diversity of planting units, and then undergoes a steady decline over geological time spans because of stochastic mortality and intraspecific competition. Low levels of clonal diversity resulting from restricted immigration or clonally depauperate planting materials in turn places strict limits on opportunities for outcrossing in a species known to suffer from severe inbreeding depression. Low clonal diversity may further lead to declining levels of heterozyosity of individual clones, which directly affects competitive ability. In addition, the planting of genetically diverse plant materials should take into account the genetic and adaptive differentiation that takes place when plant populations are widely separated in space and/or dwell under varying sets of environmental conditions. Thus, steps should be taken to ensure that S. alterniflora clones developed for restorative plantings are both genetically diverse and sufficiently pre-adapted to environmental conditions at the proposed restoration site. This can be achieved by growing plant materials collected from local sources and by either taking care to maintain relatively high levels of clonal diversity or by planting clones at sufficiently low densities that they will not quickly grow to monopolize a restoration site without first producing several generations of sexual recruits through crosses with nearby native populations.

Open-File Report↗
USGS2024

Linking temperature sensitivity of mangrove communities, populations and individuals across a tropical-temperate transitional zone

Climate change is reshaping coastal wetlands worldwide, driving ecosystem shifts like mangrove poleward expansion into saltmarshes in tropical-temperate transitional zones. Though warming is recognized as the primary driver, a lack of detailed field studies limits our ability to predict mangrove responses to rapid climate warming. Here, we characterized how mangroves vary across a temperature gradient at 18 sites along Florida's Gulf of Mexico coast (USA). We used minimum air temperature ( T min ) derived from daily data from 1989 to 2021 as the independent variable and applied plot-based and synoptic approaches to quantify species-specific mangrove variation at community, population, and individual levels. We then used these results to spatially project future mangrove ecosystem properties under multiple warming scenarios. Across the T min gradient from −10.8 to −1.4°C, mangrove canopy height and coverage ranged from 0.4 to 11.5 m and 15% to 98%, respectively, with both exhibiting sigmoidal increases with T min . Estimated mangrove aboveground biomass ranged from 0 to 496.7 Mg/ha and showed a positive linear relationship with T min due both to the tall tree stratum's increased biomass per tree and higher abundance. While the population abundance and coverage of Rhizophora mangle and Laguncularia racemosa had positive linear relationships with T min , Avicennia germinans exhibited a significant quadratic relationship, reflecting the higher freeze tolerance of this species. Such tolerance may stem from A. germinans ' higher morphological plasticity observed at the individual level, adapting to cold stress by exhibiting a more shrub-like architecture at colder sites. Based on these field-derived quantitative relationships, we projected substantial increases in mangrove coverage and canopy height near current range limits, with tall A. germinans dominating in the north and R. mangle dominating the centre and south of the study region. Synthesis. To better predict the ecological consequences in coastal wetlands under future climate change, it is essential to understand how mangroves respond to winter temperature regimes across a temperature gradient. Collectively, these cross-level and species-specific results advance our understanding of mangrove temperature sensitivity and provide information about the future of coastal wetland structure and function in response to a changing climate.

Florida↗
USGS2017

Regional patterns of Mesozoic-Cenozoic magmatism in western Alaska revealed by new U-Pb and 40Ar/39Ar ages

In support of regional geologic framework studies, we obtained 50 new argon-40/argon-39 ( 40 Ar/ 39 Ar) ages and 33 new uranium-lead (U-Pb) ages from igneous rocks of southwestern Alaska. Most of the samples are from the Sleetmute and Taylor Mountains quadrangles; smaller collections or individual samples are from the Bethel, Candle, Dillingham, Goodnews Bay, Holy Cross, Iditarod, Kantishna River, Lake Clark, Lime Hills, McGrath, Medfra, Talkeetna, and Tanana quadrangles. A U-Pb zircon age of 317.7±0.6 million years (Ma) reveals the presence of Pennsylvanian intermediate igneous (probably volcanic) rocks in the Tikchik terrane, Bethel quadrangle. A U-Pb zircon age of 229.5±0.2 Ma from gabbro intruding the Rampart Group of the Angayucham-Tozitna terrane, Tanana quadrangle, confirms and tightens a previously cited Triassic age for this intrusive suite. A fresh mafic dike in Goodnews Bay quadrangle yielded a 40 Ar/ 39 Ar whole rock age of 155.0±1.9 Ma; this establishes a Jurassic or older age for the previously unconstrained (Paleozoic? to Mesozoic?) sandstone unit that it intrudes. A thick felsic tuff in the Gemuk Group in Taylor Mountains quadrangle yielded a U-Pb zircon age of 153.0±2.0 Ma, extending the age of magmatism in this part of the Togiak terrane back into the Late Jurassic. We report three new U-Pb zircon ages between 120 and 110 Ma—112.0±0.9 Ma from syenite in the Candle quadrangle, 114.9±0.3 Ma from orthogneiss assigned to the Ruby terrane in Iditarod quadrangle, and 116.6±0.1 Ma from a gabbro of the Dishna River mafic-ultramafic complex in Iditarod quadrangle. The latter result requires a substantial age revision, from Triassic to Cretaceous, for at least some rocks that have been mapped as the Dishna River mafic-ultramafic complex. A tuff in the Upper Cretaceous Kuskokwim Group yielded a U-Pb zircon (sensitive high-resolution ion microprobe, SHRIMP) age of 88.3±1.0 Ma; we speculate that the eruptive source was an arc along the trend of the Pebble porphyry copper deposit along the Gulf of Alaska continental margin. More than half of the new ages fall between 75 and 65 Ma, confirming the existence, based on conventional potassium-argon (K-Ar) ages, of a 70-Ma igneous flare-up across southwestern Alaska. Our new ages hint that during this pulse, the locus of magmatism shifted toward the Gulf of Alaska, that is, toward a more outboard position. This shift is consistent with the hypothesis that magmatism was the product of rollback of a subducted slab, which at that time would have been the Resurrection Plate. Intrusive rocks in the Taylor Mountains and Sleetmute quadrangles in the age range of 63 to 59 Ma were emplaced shortly before the onset of ridge subduction as dated by near-trench plutons in the adjacent part of the Chugach accretionary complex. Southwestern Alaska at this time would have been positioned above a very young subducted slab belonging to the Resurrection Plate; magmas, in this scenario, were generated near the edge of the slab window related to ridge subduction. A 56.3±0.2 Ma granite in Taylor Mountains quadrangle and a 54.7±0.7 Ma ashfall tuff in McGrath quadrangle were likely emplaced above the Resurrection-Kula slab window, which by this time is inferred to have entered the region. Another ashfall tuff in McGrath quadrangle, at 42.8±0.5 Ma, likely belongs to the Meshik Arc, the product of renewed subduction after inferred passage of the slab window. A 49.0±0.3-Ma rhyolite in Taylor Mountains quadrangle is about the age of the transition from slab window to renewed subduction. Two plutons in the western Alaska Range, at 31.8±0.4 and 30.9±0.6 Ma, belong to a suite of gabbro to peralkaline granite of unknown origin. Finally, a 4.6±0.1-Ma basalt from a flow in Taylor Mountains quadrangle belongs to the Neogene basaltic province of western Alaska. These rocks were erupted in a distal retroarc setting; the cause of magmatism is unknown.

Alaska↗
USGS1983

Structure maps and seismic stratigraphy of the Yakataga segment of the continental margin, northern Gulf of Alaska

Multichannel seismic-reflection data show the late Cenozoic structure, seismic stratigraphy, and geologic history of the Yakataga segment of the continental margin, between Icy Bay and Kayak Island, northern Gulf of Alaska. The structure of the Yakataga segment consists of broad folds and associated thrust faults beneath the continental shelf and slope, trending generally northeast in the eastern part of the s~gment to east-west in the western part. Anticlines are generally asymmetric and doubly plunging and are commonly bounded on the seaward side by high-angle thrust faults. The degree of deformation is less intense than is observed in adjacent onshore areas. The age of deformation decreases seaward and the deformation shows an overall southeastward migration with time. Structures of similar age define three structural zones; structural growth was roughly contemporaneous in each structural zone, although the local growth pattern is complex in detail. Deformation within each structural zone was followed by subsidence and burial by rapidly deposited marine sediment. Deformation appears to have been continuous during the late Cenozoic, rather than a series of discrete events, because subsidence of a particular structural zone is accompanied by initiation of growth on a younger, more seaward zone. Varying degrees of reactivation of the older structures within recent time have resulted in renewed uplift of these structures. Average sedimentation, uplift, and subsidence rates are all extremely high, and generally range from about 1 to 2 m/1,000 yr; these rates can locally be much higher. The average strike of structures in the Yakataga segment indicates northwest-southeastward compression and is consistent with the current convergence direction between the Pacific and North America plates. Observed shortening within the segment is much less than required by the late Cenozoic convergence rate (about 6 cm/yr), and the major deformation is taken up elsewhere, primarily onshore. Thus, the deformation of the Yakataga segment is caused by minor shortening of the continental margin between Cross Sound and Kayak Island, which together comprise the Yakutat block, as the margin moves northwestward with the Pacific plate and collides with the North America plate.

Alaska↗
USGS2011

Early marine growth of pink salmon in Prince William Sound and the coastal gulf of Alaska during years of low and high survival

Although early marine growth has repeatedly been correlated with overall survival in Pacific salmon Oncorhynchus spp., we currently lack a mechanistic understanding of smolt-to-adult survival. Smolt-to-adult survival of pink salmon O. gorbuscha returning to Prince William Sound was lower than average for juveniles that entered marine waters in 2001 and 2003 (3% in both years), and high for those that entered the ocean in 2002 (9%) and 2004 (8%). We used circulus patterns from scales to determine how the early marine growth of juvenile pink salmon differed (1) seasonally during May-October, the period hypothesized to be critical for survival; (2) between years of low and high survival; and (3) between hatchery and wild fish. Juvenile pink salmon exhibited larger average size, migrated onto the continental shelf and out of the sampling area more quickly, and survived better during 2002 and 2004 than during 2001 and 2003. Pink salmon were consistently larger throughout the summer and early fall during 2002 and 2004 than during 2001 and 2003, indicating that larger, faster-growing juveniles experienced higher survival. Wild juvenile pink salmon were larger than hatchery fish during low-survival years, but no difference was observed during high-survival years. Differences in size among years were determined by some combination of growing conditions and early mortality, the strength of which could vary significantly among years. ?? Copyright by the American Fisheries Society 2008.

Transactions of the American Fisheries Society↗