SEARCH · Search USGS

Results for “Earth Systems and Environmental Sciences”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources

USGS2007

Environmental Assessment of the Muscatatuck Urban Training Center near Butlerville, Indiana, October and November 2005

An environmental assessment of the Muscatatuck Urban Training Center near Butlerville in Jennings County, Indiana, was completed during October and November 2005. As part of the Department of Defense Earth Science Program, the U.S. Geological Survey collected information about environmental conditions at the 825-acre former State of Indiana mental health facility prior to its conversion by the Indiana National Guard into an urban training center. The assessment was designed to investigate the type and extent of potential contamination associated with historical activities in selected areas of the facility. Samples of surface water, ground water, surface soil, and buried sediment were collected for the assessment in seven geographic study areas. Surface-water samples were collected from flowing and pooled surface water, as well as seeps and springs where ground water discharged at the land surface. Ground-water samples were collected from temporary wells installed in boreholes drilled to bedrock. Surface-soil samples were collected near sites of possible contamination. Buried-sediment samples were taken from core material collected near the top of bedrock at depths of 6.4 to 26 feet. For the assessment, 59 environmental, 22 quality-assurance, and 46 laboratory-blank samples were analyzed for as many as 65 volatile organic compounds, 62 semivolatile organic compounds, 20 trace elements, 10 inorganic cations and anions, 3 nutrients, and 4 water-quality characteristics. Concentrations of constituents detected in these samples were compared with regulatory standards (the Indiana Surface-Water-Quality Standards and Indiana Ground-Water-Quality Standards) and guidance criteria from the Indiana Department of Environmental Management's Risk Integrated System of Closures for contaminated soil and ground water. Standards or criteria were exceeded by 17 constituent concentrations in 11 environmental samples from 5 of the 7 geographic study areas. Standards or criteria were exceeded for 10 constituents: ammonia, arsenic, benzo(a)pyrene, beryllium, chloride, chloroform, copper, lead, sulfate, and zinc.

Indiana↗

USGS2009

Measurement of field-saturated hydraulic conductivity on fractured rock outcrops near Altamura (Southern Italy) with an adjustable large ring infiltrometer

Up to now, field studies set up to measure field-saturated hydraulic conductivity to evaluate contamination risks, have employed small cylinders that may not be representative of the scale of measurements in heterogeneous media. In this study, a large adjustable ring infiltrometer was designed to be installed on-site directly on rock to measure its field-saturated hydraulic conductivity. The proposed device is inexpensive and simple to implement, yet also very versatile, due to its large adjustable diameter that can be fixed on-site. It thus allows an improved representation of the natural system's heterogeneity, while also taking into consideration irregularities in the soil/rock surface. The new apparatus was tested on an outcrop of karstic fractured limestone overlying the deep Murge aquifer in the South of Italy, which has recently been affected by untreated sludge disposal, derived from municipal and industrial wastewater treatment plants. The quasi-steady vertical flow into the unsaturated fractures was investigated by measuring water levels during infiltrometer tests. Simultaneously, subsurface electrical resistivity measurements were used to visualize the infiltration of water in the subsoil, due to unsaturated water flow in the fractures. The proposed experimental apparatus works well on rock outcrops, and allows the repetition of infiltration tests at many locations in order to reduce model uncertainties in heterogeneous media. ?? 2009 Springer-Verlag.

Environmental Earth Sciences↗

USGS2022

It’s time for focused in situ studies of planetary surface-atmosphere interactions

A critical gap in planetary observations has been in situ characterization of extra-terrestrial, present-day atmospheric and surface environments and activity. While some surface activity has been observed and some in situ meteorological measurements have been collected by auxiliary instruments on Mars, existing information is insufficient to conclusively characterize the natural processes via concurrent and high-resolution measurement of environmental drivers and activity. Thus, many atmospheric, aeolian, and other surface processes models – which are used to generate key constraints on science and exploration in many areas of planetary investigation—such as surface exposure/erosion estimates, landscape interpretation, and modeling dust storm development—remain untested under non-Earth conditions. Analogous terrestrial processes are often studied intensively via numerical modeling that integrates empirical results from laboratory and/or field studies of process-response interactions between the atmosphere and relevant surface landforms. Incorporation of such in situ measurements into model development has significantly advanced our understanding of atmosphere-surface interactions and related geomorphic processes on Earth, and is poised to do so on other planets. However, to date, such testing and refinement have not been possible in other planetary environments, partially because investigations of this sort require new technologies, mission architectures, and operations designs (e.g., different from large rovers focused on geochemical investigations) to fully address the key gaps in our understanding while keeping cost and risk low. Fortunately, technological developments in the areas of surface access, instrumentation, and onboard processing/memory now enable small spacecraft to accommodate meteorological and aeolian instrumentation that could collect the needed measurements to fill this critical gap while remaining within typical small spacecraft resource budgets. Furthermore, maturity of our understanding of the broader geologic and atmospheric context on Mars provides a ready framework for ingestion of discrete ground truth measurements into our understanding of the broader and multi-scale martian natural systems and processes. These advancements make addressing key science questions with novel mission concepts feasible, promising results that would significantly advance our understanding of extraterrestrial surface-atmosphere interactions. This summary follows from a community-generated white paper for the ongoing Planetary Science/Astrobiology Decadal Survey, small spacecraft concept development at JPL, and numerous JPL and community discussions.

Conference Paper↗

USGS2021

Discrete sample introduction module for quantitative and isotopic analysis of methane and other gases by cavity ring-down spectroscopy

Carbon dioxide (CO 2 ) and methane (CH 4 ) are natural and anthropogenic products that play a central role in the global carbon cycle and regulating Earth’s climate. Applications utilizing laser absorption spectroscopy, which continuously measure concentrations and stable isotope ratios of these greenhouse gases, are routinely employed to measure the source and magnitude of atmospheric inputs. We developed a discrete sample introduction module (DSIM) to enable measurements of methane and CO 2 concentrations and δ 13 C values from limited volume (5–100 mL) gas samples when interfaced with a commercially available cavity ring-down spectroscopy (CRDS) analyzer. The analysis has a dynamic range that spans six orders of magnitude from 100% analyte to the lower limit of instrument detection (2 ppm). We demonstrate system performance for methane by comparing concentrations and δ 13 C results from the DSIM-CRDS system and traditional methods for a variety of sample types, including low concentration (nanomolar CH 4 ) seawater and high concentration (>90% CH 4 ) natural gas. The expansive concentration range of the field-portable DSIM-CRDS system can measure enhances analytical performance for investigating methane and CO 2 dynamics and, potentially, other gases measured by laser absorption spectroscopy.

Environmental Science & Technology↗

USGS2009

Application of a rule-based model to estimate mercury exchange for three background biomes in the continental United States

Ecosystems that have low mercury (Hg) concentrations (i.e., not enriched or impactedbygeologic or anthropogenic processes) cover most of the terrestrial surface area of the earth yet their role as a net source or sink for atmospheric Hg is uncertain. Here we use empirical data to develop a rule-based model implemented within a geographic information system framework to estimate the spatial and temporal patterns of Hg flux for semiarid deserts, grasslands, and deciduous forests representing 45% of the continental United States. This exercise provides an indication of whether these ecosystems are a net source or sink for atmospheric Hg as well as a basis for recommendation of data to collect in future field sampling campaigns. Results indicated that soil alone was a small net source of atmospheric Hg and that emitted Hg could be accounted for based on Hg input by wet deposition. When foliar assimilation and wet deposition are added to the area estimate of soil Hg flux these biomes are a sink for atmospheric Hg. ?? 2009 American Chemical Society.

Environmental Science & Technology↗

USGS2022

The biogeography of relative abundance of soil fungi versus bacteria in surface topsoil

Fungi and bacteria are the two dominant groups of soil microbial communities worldwide. By controlling the turnover of soil organic matter, these organisms directly regulate the exchange of carbon between the soil and the atmosphere. Fundamental differences in the physiology and life history of bacteria and fungi suggest that variation in the biogeography of soil fungal and bacterial relative abundance could drive striking differences in carbon decomposition and soil organic matter formation across different biomes. However, a lack of global and predictive information on the distribution of these organisms in terrestrial 45 ecosystems has prevented the inclusion of soil fungal and bacterial relative abundance and the associated processes into global biogeochemical models. Here, we used a global scale dataset in the top soil surface (>3000 distinct observations of soil fungal and bacterial abundance) to generate the first quantitative and spatially high resolution (1km) explicit map of soil fungal proportion, defined as fungi/fungi + bacteria, across terrestrial ecosystems. We reveal striking latitudinal trends where fungal dominance increases in cold and high latitude environments with large soil carbon stocks. There was strong non-linear response of fungal 50 dominance to environmental gradient, i.e., mean annual temperature (MAT) and net primary productivity (NPP). Fungi and bacteria dominated in regions with low and high MAT and NPP, respectively, thus representing slow vs. fast soil energy channels, a concept with a long history in soil ecology. These high-resolution models provide the first steps towards representing the major soil microbial groups and their functional differences in global biogeochemical models to improve predictions of soil organic matter turnover under current and future climate scenarios

Earth System Science Data↗

USGS2016

Users and uses of Landsat 8 satellite imagery—2014 survey results

Executive Summary In 2013, Landsat 8 began adding high quality, global, moderate-resolution imagery to the more than 40-year archive of Landsat imagery. To assess the potential effects of the availability of Landsat 8 imagery on users and their work, the U.S. Geological Survey (USGS) Land Remote Sensing Program (LRS) initiated a survey of Landsat users. The objectives of the survey were to 1. Characterize various Landsat user groups, such as United States (U.S.) and international users and Landsat 8 and non-Landsat 8 users; 2. Identify any differences among user groups in uses and preferences; 3. Measure the importance of and satisfaction with Landsat 8 attributes; 4. Assess the importance to users of the frequency of usable imagery; and 5. Determine any challenges in using Landsat 8. The online survey was sent to 51,617 Landsat users registered with USGS in May 2014. Almost 13,000 people responded to the survey for a response rate of 25 percent (n = 12,966). Current Landsat users (users who had used Landsat in their work in the year prior to the survey) composed 89 percent of the sample (n = 11,549) and past Landsat users composed 11 percent (n = 1,417). The results reported here apply to current Landsat users registered with the USGS Earth Resources Observation and Science (EROS) Center. Users from 161 countries responded to the survey. Of those, 19 percent were citizens or permanent residents of the United States and 81 percent resided in other countries. More than 70 percent of current users had used Landsat 8 in the year prior to the survey. The majority of Landsat 8 users (65 percent) were established users who used Landsat imagery regularly both before and after Landsat 8 imagery became available. The average current Landsat user was male, 36 years old, and highly educated, with 9 years of experience using satellite imagery or geographic information system (GIS) software. Landsat 8 users had, on average, two more years of experience than non-Landsat 8 users. Users were employed predominantly by academic institutions (65 percent), followed by private businesses (13 percent), Federal governments (10 percent), State and local governments (6 percent), and nonprofit organizations (6 percent). Of the Landsat imagery obtained in the past year by current users, on average 31 percent came from a Landsat 8 sensor. An equivalent amount came from the Landsat 7 ETM+ sensor (33 percent); slightly less came from Landsats 4 and 5 TM sensors (27 percent). Much less came from Landsats 1 through 5 MSS sensors (5 percent). Overall, more than a third of users’ work used Landsat imagery (38 percent). Of this work, on average, 37 percent of the work was operational. Landsat 8 users considered a greater proportion of their work operational than non-Landsat 8 users (39 percent compared with 29 percent). Environmental sciences and management were the most commonly selected primary applications (selected by 42 percent of users). Land use/land cover (23 percent) was the second most commonly selected primary application, followed by education (12 percent), agriculture (9 percent), and planning and development (6 percent). Landsat 8 users were asked to rank the importance of certain attributes in determining whether to use Landsat 8 imagery in their work. The archive was ranked most important, followed by cost, spatial resolution, extent of coverage, data quality, and frequency of revisit. Users were asked how satisfied they were with these same attributes as they currently apply to Landsat 8 imagery. On average, users were most satisfied with lack of cost, extent of coverage, data quality, and the archive, but they were satisfied with all attributes. Users were asked how often they needed Landsat imagery to meet various requirements for their primary application. The survey question specifically asked how often users needed usable imagery, which differs from how often they would like the Landsat satellites to acquire an image. Users were asked to identify their needed frequency of usable imagery for the following levels: 1. Threshold level—the minimum frequency of usable imagery needed to be of any value to their primary application. 2. Breakthrough level—the frequency of usable imagery that would result in a significant improvement for their primary application of the imagery. 3. Target level—the frequency of usable imagery that would only provide a limited additional increase in the expected performance for their primary application. To meet the threshold level, three-quarters of users needed usable imagery every 17 days or less frequently. At the breakthrough level, two-thirds of users (64 percent) needed a usable image every 5–16 days. The current constellation of two satellites (Landsat 7 and 8) is capable of meeting the threshold and breakthrough needs of most users at least some of the time, but a single satellite would be highly unlikely to do so. Two-fifths of users (40 percent) felt that usable imagery provided every 4 days or more frequently would meet their target level which the current Landsat constellation cannot provide. Landsat 8 users were significantly more likely than non-Landsat 8 users to need usable imagery more frequently to meet their target levels. Additionally, U.S. Landsat 8 users were significantly more likely than other Landsat users to need usable imagery more frequently in order meet both their breakthrough and target levels. To explore the effect of the availability of Landsat 8 imagery on Landsat imagery use in general, established users (those who had consistently used Landsat imagery both before and after Landsat 8 imagery became available) using Landsat 8 imagery were asked about changes in the amount of Landsat imagery they used. The majority of established users using Landsat 8 imagery (60 percent) reported an average increase of 51 percent in the number of scenes obtained after Landsat 8 imagery became available. Landsat 8 users were asked if they had encountered challenges in using Landsat 8 whereas non-Landsat 8 users were asked if such challenges had played a role in why they were not using Landsat 8 imagery. Although many users did not encounter challenges when using or trying to use Landsat 8 data, slightly less than 30 percent did encounter issues with processing the data to a usable point. The most common issue reported was not being able to create or have access to a surface reflectance corrected product. Other challenges were related to the file sizes of images being too large to download, store, or analyze. There were no statistically significant differences between Landsat 8 and non-Landsat 8 users in terms of challenges encountered when using or trying to use the imagery, which indicates that users were not unduly discouraged by the challenges they may have encountered. When asked about potential consequences of not using Landsat 8, more than half of the non-Landsat 8 users did not report detrimental effects on their work from not using the imagery. Of those who did report detrimental effects, decreased quality of work, decreased scope of work, and increased time spent on work were the most common.

Open-File Report↗

USGS2022

Permafrost and climate change: Carbon cycle feedbacks from the warming Arctic

Rapid Arctic environmental change affects the entire Earth system as thawing permafrost ecosystems release greenhouse gases to the atmosphere. Understanding how much permafrost carbon will be released, over what time frame, and what the relative emissions of carbon dioxide and methane will be is key for understanding the impact on global climate. In addition, the response of vegetation in a warming climate has the potential to offset at least some of the accelerating feedback to the climate from permafrost carbon. Temperature, organic carbon, and ground ice are key regulators for determining the impact of permafrost ecosystems on the global carbon cycle. Together, these encompass services of permafrost relevant to global society as well as to the people living in the region and help to determine the landscape-level response of this region to a changing climate.

Annual Review of Earth Science↗

USGS2023

Interlaboratory comparison of testing hydraulic, elastic, and failure properties in compression: Lessons learned

Many geoscientific problems require us to exploit synergies of experimental and numerical approaches, which in turn lead to questions regarding the significance of experimental details for validation of numerical codes. We report results of an interlaboratory comparison regarding experimental determination of mechanical and hydraulic properties of samples from five rock types, three sandstone varieties with porosities ranging from 5% to 20%, a marble, and a granite. The objective of this study was to build confidence in the participating laboratories’ testing approaches and to establish tractable standards for several physical properties of rocks. We addressed the issue of sample-to-sample variability by investigating the variability of basic physical properties of samples of a particular rock type and by performing repeat tests. Compressive strength of the different rock types spans an order of magnitude and shows close agreement between the laboratories. However, differences among stress–strain relations indicate that the external measurement of axial displacement and the determination of system stiffness require special attention, apparently more so than the external load measurement. Furthermore, post-failure behavior seems to exhibit some machine-dependence. The different methods used for the determination of hydraulic permeability, covering six orders of magnitude for the sample suite, yield differences in absolute values and pressure dependence for some rocks but not for others. The origin of the differences in permeability, in no case exceeding an order of magnitude, correlate with the compressive strength and potentially reflect a convolution of end plug–sample interaction, sample-to-sample variability, heterogeneity on sample scale, and/or anisotropy, the last two aspects are notably not accounted for by the applied evaluation procedures. Our study provides an extensive data set apt for “benchmarking” considerations, be it regarding new laboratory equipment or numerical modeling approaches.

Environmental Earth Sciences↗

USGS2020

A hybrid approach for predictive soil property mapping using conventional soil survey data

Soil property maps are important for land management and earth systems modeling. A new hybrid point-disaggregation predictive soil property mapping strategy improved mapping in the Colorado River Basin, and can be applied to other areas with similar data (e.g. conterminous United States). This new approach increased sample size ~6-fold over past efforts. Random forests related environmental raster layers representing soil forming factors to samples to predict 15 soil properties (pH, texture fractions, rock, electrical conductivity, gypsum, CaCO3, sodium adsorption ratio, available water capacity, bulk density, erodibility, organic matter) at 7 depths, depth to restrictive layer, and surface rock size and cover. Cross-validations resulted in coefficient of determinations averaging 0.52, with a range of 0.20 to 0.76; and mean absolute errors ranged from 3% to 98% of training data averages with a mean of 41%. Uncertainty estimates were also developed by creating relative prediction intervals (RPIs) for the entire study area, which allow end users to evaluate uncertainty relative to original data distributions. Average error increased with higher RPI values (higher uncertainty), and areas with the highest RPI are consistently under-sampled, suggesting that additional sampling in these areas may improve prediction accuracy. Greater uncertainty was also observed in areas with shale parent materials and physiographic settings uncommon relative to the broader study area.

New Mexico, Colorado, Wyoming, Utah, Nevada, Arizo↗

USGS1991

Landscape analysis: Theoretical considerations and practical needs

Numerous systems of land classification have been proposed. Most have led directly to or have been driven by an author's philosophy of earth-forming processes. However, the practical need of classifying land for planning and management purposes requires that a system lead to predictions of the results of management activities. We propose a landscape classification system composed of 11 units, from realm (a continental mass) to feature (a splash impression). The classification concerns physical aspects rather than economic or social factors; and aims to merge land inventory with dynamic processes. Landscape units are organized using a hierarchical system so that information may be assembled and communicated at different levels of scale and abstraction. Our classification uses a geomorphic systems approach that emphasizes the geologic-geomorphic attributes of the units. Realm, major division, province, and section are formulated by subdividing large units into smaller ones. For the larger units we have followed Fenneman's delineations, which are well established in the North American literature. Areas and districts are aggregated into regions and regions into sections. Units smaller than areas have, in practice, been subdivided into zones and smaller units if required. We developed the theoretical framework embodied in this classification from practical applications aimed at land use planning and land management in Maryland (eastern Piedmont Province near Baltimore) and Utah (eastern Uinta Mountains). ?? 1991 Springer-Verlag New York Inc.

Environmental Geology and Water Sciences↗

USGS2003

Imaging spectroscopy: Earth and planetary remote sensing with the USGS Tetracorder and expert systems

Imaging spectroscopy is a tool that can be used to spectrally identify and spatially map materials based on their specific chemical bonds. Spectroscopic analysis requires significantly more sophistication than has been employed in conventional broadband remote sensing analysis. We describe a new system that is effective at material identification and mapping: a set of algorithms within an expert system decision‐making framework that we call Tetracorder. The expertise in the system has been derived from scientific knowledge of spectral identification. The expert system rules are implemented in a decision tree where multiple algorithms are applied to spectral analysis, additional expert rules and algorithms can be applied based on initial results, and more decisions are made until spectral analysis is complete. Because certain spectral features are indicative of specific chemical bonds in materials, the system can accurately identify and map those materials. In this paper we describe the framework of the decision making process used for spectral identification, describe specific spectral feature analysis algorithms, and give examples of what analyses and types of maps are possible with imaging spectroscopy data. We also present the expert system rules that describe which diagnostic spectral features are used in the decision making process for a set of spectra of minerals and other common materials. We demonstrate the applications of Tetracorder to identify and map surface minerals, to detect sources of acid rock drainage, and to map vegetation species, ice, melting snow, water, and water pollution, all with one set of expert system rules. Mineral mapping can aid in geologic mapping and fault detection and can provide a better understanding of weathering, mineralization, hydrothermal alteration, and other geologic processes. Environmental site assessment, such as mapping source areas of acid mine drainage, has resulted in the acceleration of site cleanup, saving millions of dollars and years in cleanup time. Imaging spectroscopy data and Tetracorder analysis can be used to study both terrestrial and planetary science problems. Imaging spectroscopy can be used to probe planetary systems, including their atmospheres, oceans, and land surfaces.

Journal of Geophysical Research E: Planets↗

USGS2002

Environmental variation, vegetation distribution, carbon dynamics and water/energy exchange at high latitudes

The responses of high latitude ecosystems to global change involve complex interactions among environmental variables, vegetation distribution, carbon dynamics, and water and energy exchange. These responses may have important consequences for the earth system. In this study, we evaluated how vegetation distribution, carbon stocks and turnover, and water and energy exchange are related to environmental variation spanned by the network of the IGBP high latitude transects. While the most notable feature of the high latitude transects is that they generally span temperature gradients from southern to northern latitudes, there are substantial differences in temperature among the transects. Also, along each transect temperature co-varies with precipitation and photosynthetically active radiation, which are also variable among the transects. Both climate and disturbance interact to influence latitudinal patterns of vegetation and soil carbon storage among the transects, and vegetation distribution appears to interact with climate to determine exchanges of heat and moisture in high latitudes. Despite limitations imposed by the data we assembled, the analyses in this study have taken an important step toward clarifying the complexity of interactions among environmental variables, vegetation distribution, carbon stocks and turnover, and water and energy exchange in high latitude regions. This study reveals the need to conduct coordinated global change studies in high latitudes to further elucidate how interactions among climate, disturbance, and vegetation distribution influence carbon dynamics and water and energy exchange in high latitudes.

Journal of Vegetation Science↗

USGS2003

To the National Map and beyond

Scientific understanding, technology, and social, economic, and environmental conditions have driven a rapidly changing demand for geographic information, both digital and analog. For more than a decade, the U.S. Geological Survey (USGS) has been developing innovative partnerships with other government agencies and private industry to produce and distribute geographic information efficiently; increase activities in remote sensing to ensure ongoing monitoring of the land surface; and develop new understanding of the causes and consequences of land surface change. These activities are now contributing to a more robust set of geographic information called The National Map (TNM). The National Map is designed to provide an up-to-date, seamless, horizontally and vertically integrated set of basic digital geographic data, a frequent monitoring of changes on the land surface, and an understanding of the condition of the Earth's surface and many of the processes that shape it. The USGS has reorganized its National Mapping Program into three programs to address the continuum of scientific activities-describing (mapping), monitoring, understanding, modeling, and predicting. The Cooperative Topographic Mapping Program focuses primarily on the mapping and revision aspects of TNM. The National Map also includes results from the Land Remote Sensing and Geographic Analysis and Monitoring Programs that provide continual updates, new insights, and analytical tools. The National Map is valuable as a framework for current research, management, and operational activities. It also provides a critical framework for the development of distributed, spatially enabled decision support systems.

Cartography and Geographic Information Science↗

USGS2017

Sediment unmixing using detrital geochronology

Sediment mixing within sediment routing systems can exert a strong influence on the preservation of provenance signals that yield insight into the influence of environmental forcings (e.g., tectonism, climate) on the earth’s surface. Here we discuss two approaches to unmixing detrital geochronologic data in an effort to characterize complex changes in the sedimentary record. First we summarize ‘top-down’ mixing, which has been successfully employed in the past to characterize the different fractions of prescribed source distributions (‘parents’) that characterize a derived sample or set of samples (‘daughters’). Second we propose the use of ‘bottom-up’ methods, previously used primarily for grain size distributions, to model parent distributions and the abundances of these parents within a set of daughters. We demonstrate the utility of both top-down and bottom-up approaches to unmixing detrital geochronologic data within a well-constrained sediment routing system in central California. Use of a variety of goodness-of-fit metrics in top-down modeling reveals the importance of considering the range of allowable mixtures over any single best-fit mixture calculation. Bottom-up modeling of 12 daughter samples from beaches and submarine canyons yields modeled parent distributions that are remarkably similar to those expected from the geologic context of the sediment-routing system. In general, mixture modeling has potential to supplement more widely applied approaches in comparing detrital geochronologic data by casting differences between samples as differing proportions of geologically meaningful end-member provenance categories.

Earth and Planetary Science Letters↗

USGS2015

Higher-order statistical moments and a procedure that detects potentially anomalous years as two alternative methods describing alterations in continuous environmental data

Statistics of central tendency and dispersion may not capture relevant or desired characteristics of the distribution of continuous phenomena and, thus, they may not adequately describe temporal patterns of change. Here, we present two methodological approaches that can help to identify temporal changes in environmental regimes. First, we use higher-order statistical moments (skewness and kurtosis) to examine potential changes of empirical distributions at decadal extents. Second, we adapt a statistical procedure combining a non-metric multidimensional scaling technique and higher density region plots to detect potentially anomalous years. We illustrate the use of these approaches by examining long-term stream temperature data from minimally and highly human-influenced streams. In particular, we contrast predictions about thermal regime responses to changing climates and human-related water uses. Using these methods, we effectively diagnose years with unusual thermal variability and patterns in variability through time, as well as spatial variability linked to regional and local factors that influence stream temperature. Our findings highlight the complexity of responses of thermal regimes of streams and reveal their differential vulnerability to climate warming and human-related water uses. The two approaches presented here can be applied with a variety of other continuous phenomena to address historical changes, extreme events, and their associated ecological responses.

Hydrology and Earth System Sciences↗

USGS2001

Our evolving conceptual model of the coastal eutrophication problem

A primary focus of coastal science during the past 3 decades has been the question: How does anthropogenic nutrient enrichment cause change in the structure or function of nearshore coastal ecosystems? This theme of environmental science is recent, so our conceptual model of the coastal eutrophication problem continues to change rapidly. In this review, I suggest that the early (Phase I) conceptual model was strongly influenced by limnologists, who began intense study of lake eutrophication by the 1960s. The Phase I model emphasized changing nutrient input as a signal, and responses to that signal as increased phytoplankton biomass and primary production, decomposition of phytoplankton-derived organic matter, and enhanced depletion of oxygen from bottom waters. Coastal research in recent decades has identified key differences in the responses of lakes and coastal-estuarine ecosystems to nutrient enrichment. The contemporary (Phase II) conceptual model reflects those differences and includes explicit recognition of (1) system-specific attributes that act as a filter to modulate the responses to enrichment (leading to large differences among estuarine-coastal systems in their sensitivity to nutrient enrichment); and (2) a complex suite of direct and indirect responses including linked changes in: water transparency, distribution of vascular plants and biomass of macroalgae, sediment biogeochemistry and nutrient cycling, nutrient ratios and their regulation of phytoplankton community composition, frequency of toxic/harmful algal blooms, habitat quality for metazoans, reproduction/growth/survival of pelagic and benthic invertebrates, and subtle changes such as shifts in the seasonality of ecosystem functions. Each aspect of the Phase II model is illustrated here with examples from coastal ecosystems around the world. In the last section of this review I present one vision of the next (Phase III) stage in the evolution of our conceptual model, organized around 5 questions that will guide coastal science in the early 21st century: (1) How do system-specific attributes constrain or amplify the responses of coastal ecosystems to nutrient enrichment? (2) How does nutrient enrichment interact with other stressors (toxic contaminants, fishing harvest, aquaculture, nonindigenous species, habitat loss, climate change, hydrologic manipulations) to change coastal ecosystems? (3) How are responses to multiple stressors linked? (4) How does human-induced change in the coastal zone impact the Earth system as habitat for humanity and other species? (5) How can a deeper scientific understanding of the coastal eutrophication problem be applied to develop tools for building strategies at ecosystem restoration or rehabilitation?

Marine Ecology Progress Series↗

USGS2011

EAARL Coastal Topography--Cape Canaveral, Florida, 2009: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Kennedy Space Center, FL. This project provides highly detailed and accurate datasets of a portion of the eastern Florida coastline beachface, acquired on May 28, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations.

Data Series↗