Search USGS⌕ Search

SEARCH · Search USGS

Results for “Earth Surfaces Processes and Landforms”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources
USGS2022

The use of continuous sediment-transport measurements to improve sand-load estimates in a large sand-bedded river: The Lower Chippewa River, WI

Accurately determining sediment loads is necessary for managing river environments but is difficult because multiple processes can lead to large discharge-independent changes in sediment transport. Thus, estimations of sediment load using discharge–sediment rating curves fit to sparse or historical sediment-transport measurements can be inaccurate, necessitating alternative approaches to reduce uncertainty. Continuous sediment-transport measurements reduce uncertainty because they can be used to detect discharge-independent changes in transport and are therefore unaffected by hysteresis. We used largely continuous approaches to measure sand transport in the lower Chippewa River, a large sand-supplying tributary to the Mississippi River. We used side-looking acoustic-Doppler profilers to continuously measure suspended-sand concentration, and bedform-tracking techniques to episodically measure bedload transport. Bedload transport was then continuously estimated using a discharge-dependent ratio of bedload to suspended-sand transport. This approach allowed determination of sand loads that were not estimated based only on water discharge. Our continuous suspended-sand measurements show that hysteresis between discharge and suspended-sand concentration occurs during most floods. Quasi-continuous bed-elevation measurements using a scour monitor show that lags between discharge and dune geometric adjustment is also common, causing hysteresis between discharge and bedload transport during floods. Furthermore, comparisons of our measurements with historical sediment-transport measurements indicate large discharge-independent declines in both suspended-sand and bedload transport since the 1980s. These findings indicate that sand transport is a non-stationary function of water discharge over timescales ranging from within individual floods to decades. Consequently, although our continuous-measurement approach yields only a ~20–30% improvement over rating-curve estimates of sand load over multi-year periods, our approach yields up to a factor-of-five improvement in sand-load estimates over the shorter, i.e., within a flood, timescales over which the largest discharge-independent changes in sand transport occur.

Wisconsin↗
USGS2022

River channel response to invasive plant treatment across the American Southwest

Invasive riparian plants were introduced to the American Southwest in the early 19th century and contributed to regional trends of decreasing river channel width and migration rate in the 20th century. More recently, efforts to remove invasive riparian vegetation (IRV) have been widespread, especially since 1990. To what extent has IRV treatment reversed the earlier trend of channel narrowing and reduced dynamism? In this study, paired treated and untreated reaches at 15 sites along 13 rivers were compared before and after IRV treatment using repeat aerial imagery to assess long-term (~10-year) channel change due to treatment on a regional scale across the Southwest USA. We found that IRV treatment significantly increased channel width and floodplain destruction. Treated reaches had higher floodplain destruction than untreated reaches at 14 of 15 sites, and IRV treatment increased the rate of floodplain destruction by a median factor of 1.9. The effect of treatment increased with the stream power of the largest flow over the study period. Resolving observations of channel change into separate measures of floodplain destruction and formation provided more information on underlying processes than simple measurements of channel width and centerline migration rate. Restoration practitioners who perform IRV treatment projects often focus on wildlife or vegetation response; however, geomorphic processes should be considered in restoration planning because they drive aquatic habitat and vegetation dynamics, and because of the potential for damage to downstream infrastructure. Depending on the restoration goal, management practices can be used to enhance or minimize the increase in channel dynamism caused by IRV treatment.

Arizona, California, Colorado, New Mexico, Texas, ↗
USGS2023

Changes in suspended-sediment yields under divergent land-cover disturbance histories: A comparison of two large watersheds, Olympic Mountains, USA

Improvements in timber harvest practices and reductions in harvest volumes over the past half century are commonly presumed to have reduced sediment loads in many western US rivers. However, direct assessments in larger watersheds are relatively sparse. Here, we compare 2019–21 sediment concentrations against those of the late 1970s in the Bogachiel and Calawah River watersheds, adjacent and similarly sized (~300 km 2 ) basins in the western Olympic Mountains of Washington State. The Calawah River watershed has experienced significant land-cover disturbance, including a large 1951 fire, extensive post-fire salvage logging, and relatively high rates of timber harvest through the 1990s. In contrast, the Bogachiel River watershed did not burn, and experienced only modest timber harvest that largely post-dated 1970s sediment monitoring. Channel-width trends suggest the Calawah River was still recovering from 1950s disturbances in the late 1970s. We found that 2019–21 suspended-sediment loads in the Calawah River were 2.3–2.6 times lower than would have been expected based on 1970s sediment rating curves, while recent loads in the Bogachiel River were a factor of 1.4 ± 1.0 lower. We consider the plausibility and possible explanations of declining concentrations in the less-disturbed Bogachiel River. Suspended-sediment yields in the Bogachiel River were two times higher than yields in the Calawah River, which is attributed to a combination of modestly higher precipitation, more efficient runoff generation, and more extensive and erodible Quaternary valley fills in the Bogachiel River. Regional shifts in flood hydrology have also influenced suspended-sediment loads in both watersheds. Our results then document a significant decline in suspended-sediment concentrations in the Calawah River over the past half century. Reduced land-cover disturbance provides the simplest and most likely explanation for this decline, though the wide range of possible concentration changes in the Bogachiel River leaves open possibilities that other processes (human, natural, or methodologic) could be a factor.

Washington↗
USGS2023

Six years of fluvial response to a large dam removal on the Carmel River, California, USA

Measuring river response to dam removal affords a rare, important opportunity to study fluvial response to sediment pulses on a large field scale. We present a before–after/control–impact study of the Carmel River, California, measuring fluvial geomorphic and grain-size evolution over 8 years, six of which postdated removal of a 32 m-high dam (one of the largest dams removed worldwide) and included 11 flow events exceeding the 2-year flood magnitude. We find that the reservoir-sediment pulse following dam removal was relatively small (97 000 ± 24 000 t over 4 years), owing to deliberate reservoir-sediment stabilization. Scaled to the size of the Carmel River watershed and compared against long-term bedrock denudation rates, the post-dam-removal sediment release was slightly less than the annualized long-term sediment export from this basin. New sediment transited >30 km to the river mouth in less than 2 years, assisted by floods 2 and 4 years after dam removal. The sediment pulse fined the downstream riverbed while causing mostly low-magnitude bed-elevation changes: commonly 0.5 to 1 m or smaller, occurring as discontinuous sediment patches or interstitial deposits, aside from the filling and subsequent partial scour of deep pools. There was no major geomorphic reset downstream from the dam site. Geomorphic changes were driven almost entirely by flow rather than by the modest increase in sediment supply, in contrast to recent examples from other large dam removals. The relatively minor disturbance caused by dam removal on the Carmel River is likely analogous to many future dam removals: a relatively small sediment pulse after deliberate limitation of reservoir-sediment erosion, and with an upstream dam remaining in place. Thus, a large dam removal need not lead to major downstream impacts.

California↗
USGS2023

Guidance for parameterizing post-fire hydrologic models with in situ infiltration measurements

Wildfire can alter soil-hydraulic properties, often resulting in an increased prevalence of infiltration-excess overland flow and greater potential for debris-flow hazards. Mini disk tension infiltrometers (MDIs) can be used to estimate soil hydraulic properties, such as field-saturated hydraulic conductivity ( K fs ) and wetting front potential ( H f ), and their spatial variability following wildfire. However, the small (point-scale) footprint of MDI measurements makes it challenging to use these data to parameterize hydrologic models at the hillslope and watershed scales where hydrologic hazards, such as debris flows, initiate. Here, we designed numerical experiments to estimate spatially constant or watershed-scale effective hydrologic parameters (EHPs) that approximate the response of spatially variable hydrologic parameters with distributions derived from MDI measurements at five sites in the southwestern United States. We found that it is possible to define EHPs for both K fs and H f based on the MDI measurements that lead to reasonable approximations of run-off hydrographs at the outlets of small watersheds (<1 km 2 ). We found that watershed EHPs are functions of rainfall characteristics, although they are most sensitive to rainfall intensity and relatively less sensitive to the temporal distribution of rainfall. EHPs are lower than the arithmetic mean of the MDI measurements and are better approximated by the median or geometric mean of the MDI measurements, particularly for storms with recurrence intervals of approximately 1 year or less that commonly initiate post-fire debris flows. This work demonstrated that using the proposed upscaling method to estimate watershed-scale EHPs, as opposed to approximating EHPs based on the arithmetic mean of the MDI measurements, improved the ability of a hydrologic model to identify storms that are likely to produce debris flows. Results improved our ability to link point-scale MDI measurements and watershed-scale EHPs in post-fire settings and helped guide our ability to use MDI data to parameterize post-fire hydrologic models.

Arizona, New Mexico↗
USGS2024

Major fluvial erosion and a 500-Mt sediment pulse triggered by lava-dam failure, Río Coca, Ecuador

The failure of a 144-m-high lava-dam waterfall on the Río Coca, Ecuador, in February 2020 initiated a catastrophic watershed reset—regressive erosion upstream and a massive sediment pulse downstream—as the river evolves towards a new equilibrium grade. The evolution of this river corridor after a sudden base-level fall embodies the “complex response” concepts long understood through laboratory experiments, numerical modelling and smaller-scale field studies, but that have not been observed in the field before on this scale. This paper presents geomorphic and geotechnical data to characterize the evolution of the Río Coca since 2020. In the three years after the lava-dam failure, the erosion front migrated almost 13 km upstream along the mainstem river and triggered secondary headcuts that began migrating up tributaries. Erosion of the mainstem and tributary valleys generated a sediment pulse estimated to be 277 million m 3 and ~500 million tonnes (Mt) over three years, depositing sediment tens of meters thick over tens of kilometres downstream from the former waterfall. This sediment pulse is one of the largest in modern times, comparable to the annual sediment load of a major continent-draining river but with orders-of-magnitude greater sediment yield. Geomorphic adjustment of the Río Coca represents a highly unusual natural disaster threatening life, property, water quality, the regional economy, major infrastructure and energy security. However, this event also provides a rare opportunity to learn how a large autogenic watershed disturbance and recovery evolve, with important lessons for interpreting the sedimentary record of volcanic landscapes.

Río Coca↗
USGS2024

A framework to facilitate development and testing of image-based river velocimetry algorithms

Image-based methods have compelling, demonstrated potential for characterizing flow fields in rivers, but algorithms like particle image velocimetry (PIV) must be further tested and improved to enable more effective use of these techniques. This paper presents a framework designed for this exact purpose: Simulating Hydraulics and Images for Velocimetry Evaluation and Refinement (SHIVER). The approach involves coupling a hydrodynamic model with a synthetic particle generator to advect particles between frames, as dictated by local velocity vectors and thus construct a plausible image sequence specific to the reach of interest. The resulting time series can then be used as input to a velocimetry algorithm to compare image-derived estimates with known (modelled) velocities to perform an exhaustive, spatially distributed accuracy assessment. As an example application of SHIVER, we examined the effects of interrogation area (IA) size, frame rate, flow velocity, and image sequence duration on the performance of a standard PIV algorithm. This analysis indicated that image-derived velocities were generally in close agreement with those from the flow model (root mean square error <10% and mean bias <3%), except when small IAs were coupled with low frame rates. Velocity estimates were most accurate for the lowest modelled discharge ( R 2 =0.97 at baseflow) and became less reliable as the mean flow velocity increased ( R 2 =0.92 for an intermediate discharge and R 2 =0.86 at bankfull). Accuracy was essentially independent of image sequence duration, implying that long occupations might not be necessary. Errors were concentrated along channel margins, where PIV-based velocities tended to be greater than those from the flow model. Small IAs led to underpredictions of velocity, while larger IAs led to overpredictions. SHIVER is highly modular and could be updated to make use of different hydrodynamic models or image simulators. The framework could also facilitate more thorough sensitivity analyses and comparison of various velocimetry algorithms.

Earth Surface Processes and Landforms↗
USGS2024

Inbuilt age, residence time, and inherited age from radiocarbon dates of modern fires and late Holocene deposits, Western Transverse Ranges, California

Radiocarbon dates of sedimentary deposits include the elapsed time between formation of the organic material and deposition at the sample site, known as the inherited age. Long inherited ages reduce the accuracy of estimates of the timing of depositional events used to infer paleoclimate change, fire histories, and paleoearthquake timing. An inherited age distribution combines the inbuilt age distribution, which reflects the age composition of the vegetation of the source area, and the residence time distribution, which includes transport and interim storage prior to final deposition. Differentiating residence time and inbuilt age is difficult given typical dispersion of ages in a sedimentary deposit. We address this problem by comparing charcoal dates from two modern fires in southern California, the 2020 Bobcat and the 2013 Grand Fire, with a well-dated late Holocene deposit in the Pallett Creek watershed. The modern fire deposits have negligible transport time (<1 year), and 56 radiocarbon dates indicate a median age of 25 years (300-year 95% range) provides an estimate of inbuilt age for the San Gabriel Mountains. The inherited age calculated from the paleodeposits is older with a median age of ~90 years and has a positive skew (850-year 95% range). A modeled inherited age, calculated by applying the pre-bomb radiocarbon calibration curve to the modern fire age distribution, is shorter than the paleodeposit inherited age by only 21 years, indicating samples with long residence times are not common in the deposit. Comparison of inherited ages calculated from organic-rich and clastic paleodeposits indicate a slight facies dependence that may reflect longer residence time in clastic deposits. The results provide insight into the transport of charcoal through the landscape are useful for refining estimates of past environmental and tectonic events.

California↗
USGS2024

Fluviomorphic trajectories for dryland ephemeral stream channels following extreme flash floods

Ephemeral alluvial streams pose globally significant flood hazards to human habitation in drylands, but sparse data for these regions limit understanding of the character and impacts of extreme flooding. In this study, we document decadal changes in dryland ephemeral channel patterns at two sites in the lower Colorado River Basin (southwestern United States) that were ravaged by extraordinary flash floods in the 1970s: Bronco Creek, Arizona (1971), and Eldorado Canyon, Nevada (1974). We refer to these two floods as ‘fluviomorphic erasure events’, because they produced blank slates for the channels that were gradually moulded by more frequent but much smaller flood events. We studied georectified aerial photos that span ~60 years at each site to show that both study sites recovered to their pre-flood condition after ~25 years. We employ channel network metrics: stream-link area (SLA), geometric braiding index and junction-node density. Each metric decreased during the short-duration extreme flood erasure events. Subsequently, a fluviomorphic trajectory at a decadal tempo returned the channels to pre-flood values. The SLA decreased at rates of 3.6%–4.1% per year in the decade following the floods. The extreme flood events decreased the pre-flood geometric braiding index at the two sites by 56%–68%, and it took 15–24 years for this index to recover to pre-flood values. In contrast, it took 30–35 years for the channels to recover to a uniform pre-flood channel form, as indicated by the spatial distribution of bars and junction nodes. Our results document baseline examples of ephemeral stream channel evolution trajectories, as future climatic change will likely accelerate increases in the magnitudes and frequencies of extreme floods and geomorphic erasure events.

Earth Surface Processes and Landforms↗
USGS2024

Debris-flow entrainment modelling under climate change: Considering antecedent moisture conditions along the flow path

Debris-flow volumes can increase along their flow path by entraining sediment stored in the channel bed and banks, thus also increasing hazard potential. Theoretical considerations, laboratory experiments and field investigations all indicate that the saturation conditions of the sediment along the flow path can greatly influence the amount of sediment entrained. However, this process is usually not considered for practical applications. This study aims to close this gap by combining runout and hydrological models into a predictive framework that is calibrated and tested using unique observations of sediment erosion and debris-flow properties available at a Swiss debris-flow observation station (Illgraben). To this end, hourly water input to the erodible channel is predicted using a simple, process-based hydrological model, and the resulting water saturation level in the upper sediment layer of the channel is modelled based on a Hortonian infiltration concept. Debris-flow entrainment is then predicted using the RAMMS debris-flow runout model. We find a strong correlation between the modelled saturation level of the sediment on the flow path and the channel-bed erodibility for single-surge debris-flow events with distinct fronts, indicating that the modelled water content is a good predictor for erosion simulated in RAMMS. Debris-flow properties with more complex flow behaviour (e.g., multiple surges or roll waves) are not as well predicted using this procedure, indicating that more physically complete models are necessary. Finally, we demonstrate how this modelling framework can be used for climate change impact assessment and show that earlier snowmelt may shift the peak of the debris-flow season to earlier in the year. Our novel modelling framework provides a plausible approach to reproduce saturation-dependent entrainment and thus better constrain event volumes for current and future hazard assessment.

Illgraben basin↗
USGS2024

A two-dimensional, reach-scale implementation of space-time image velocimetry (STIV) and comparison to particle image velocimetry (PIV)

Image-based algorithms have become a powerful tool for estimating flow velocities in rivers. In this study, we generalize the space-time image velocimetry (STIV) framework for reach-scale application rather than along a cross section. The new algorithm provides information on both the magnitude and orientation of velocity vectors, and we refer to the algorithm as two-dimensional STIV, or 2D-STIV. The workflow involves setting up a grid, using centreline tangent vectors as initial estimates of flow direction, and then extracting space-time images (STIs) along search lines radiating from each grid node. The autocorrelation function is used to infer the inclination of streak lines present in STIs, which represents the advection of water surface features. Information on flow direction is obtained by evaluating various candidate search lines and identifying that which yields the highest velocity. This search can be performed exhaustively or via optimization. We applied the new 2D-STIV algorithm to three test cases, one simulated data set and two natural channels, and compared image-derived velocities to modelled or measured values. We also applied two established particle image velocimetry (PIV) algorithms to the same data sets. 2D-STIV performed as well as the two PIV algorithms for simulated images. For a natural river with distinct water surface features, 2D-STIV was effective for much of the channel but also led to a more patchy, irregular velocity field than the two PIV algorithms. For a site lacking obvious surface features, exhaustive 2D-STIV led to velocity estimates uncorrelated with field data while the optimization-based version produced erratic flow directions. 2D-STIV also required greater image sequence durations, higher frame rates, and generally longer computational run times. Overall, ensemble PIV was the most reliable algorithm.

Earth Surface Processes and Landforms↗
USGS2024

Oil and gas development influences potential for dust emission from the Upper Colorado River Basin, USA

Wind erosion and dust emission from drylands have large consequences for ecosystem function and human health. Wind erosion is naturally reduced by soil crusting and sheltering by non-erodible roughness elements such as plants. Land uses that reduce surface roughness and disturb the soil surface can dramatically increase dust emission. Extraction of oil and gas is a common and growing land use in the western United States (US) that removes vegetation and other roughness elements for construction of well pads and unpaved access roads, resulting in thousands of small (1–4 ha), discrete patches of unprotected soil. Here, we use a satellite albedo-based model to assess the effect of oil/gas activity on surface roughness in the Uinta-Piceance Basin, an area of the Upper Colorado River Basin (UCRB) with dense oil and natural gas development and modelled how the change in surface roughness could impact aeolian sediment flux and dust emission. We also investigated how regional drought influences the response of surface roughness to well pads and access roads. Oil/gas activity reduced surface roughness and increased modelled aeolian sediment flux at the landscape scale across much of the study region, resulting in a modest increase of 10 139 kg of dust per year, which is small relative to dust loads from a single regional dust event observed in the region, but downwind impact could be significant. The magnitude of surface roughness reductions by oil/gas activity was generally consistent among land cover types. However, in parts of the basin that had high cover of annual forbs and grasses, oil/gas activity was associated with larger surface roughness and smaller potential dust emission. Drought decreased surface roughness across disturbed and undisturbed sites, but there was no interactive effect of oil/gas activity and drought on surface roughness. These results suggest that oil/gas activity may increase sediment fluxes and likely contributes to dust emission from landscapes in the UCRB. Understanding how drought and land use change contribute to dust emissions will benefit mitigation of undesirable impacts of wind erosion and dust transport.

Colorado, Utah↗
USGS2024

The where and why of large wood occurrence in the Upper Mississippi and Illinois Rivers

Large wood (LW) plays important geomorphic and ecological roles in rivers and is widely used as a restoration tool. Changes to floodplain land use and historical removal have altered wood dynamics in fluvial systems globally. We know little about the distribution and dynamics of LW in great rivers (approximately >10 5 km 2 ) like the Upper Mississippi and Illinois Rivers despite its ecosystem importance and use in restoration projects. We assessed LW occurrence data collected by the fisheries component of the Upper Mississippi River Restoration Program's Long Term Resource Monitoring element. We analysed 25 years of data collected across six reaches of the Upper Mississippi and Illinois Rivers that represented contrasting physiographic settings, and across four aquatic area types comprising gradients of hydrology, connectivity and geomorphology. We tested hypotheses on drivers of LW occurrence using generalised linear mixed effects models, where occurrence was predicted by reach- and local-scale environmental variables. Occurrence varied significantly across reaches and aquatic area types. In general, wood occurred more frequently upriver and in side channels compared to other aquatic areas. Large wood was most strongly predicted systemically by reach identity but not local-scale variables, underscoring the importance of broad-scale physiographic gradients in defining hydrogeomorphic processes. Floodplain forests and shoreline revetment were consistently important predictors across reaches. Our findings show that the spatial variability of LW occurrence reflects the physical variability of the Upper Mississippi and Illinois Rivers. They also reveal the value in using geomorphic classifications as frameworks for understanding physical processes like LW dynamics because of their ability to contextualise site-scale conditions. The baseline understanding of LW abundance across different hydrogeomorphic gradients and scales presented here can give insight into how to more effectively target restoration efforts in great rivers and contribute to a broader understanding of LW dynamics where such studies have been lacking.

Illinois, Iowa, Minnesota, Missouri, Wisconsin↗
USGS2024

Wildfire, extreme precipitation and debris flows, oh my! Channel response to compounding disturbances in a mountain stream in the Upper Colorado Basin, USA

Compounding changes in climate and human activities stand to increase sediment input to rivers in many landscapes, including via discrete perturbations such as post-fire debris flows. Because sediment supply is a dominant control on river morphology, understanding mountain river responses to sediment regime perturbations is critical to predicting and addressing downstream effects to infrastructure, water security and aquatic habitat. A growing body of literature explores the causes, likelihood, size and composition of post-fire debris flows, but the channel response to these disturbances remains poorly studied. This study used repeat field surveys, time-lapse photographs and pre- and post-disturbance remote sensing datasets to document and analyse space- and time-varying channel response to post-fire debris flows along a steep mountain stream in the Upper Colorado River Basin, USA. Specifically, we evaluated channel morphology and bed composition changes, correlations between channel changes and valley and channel attributes, and the relative importance of spring snowmelt versus summer monsoon events. Several cross-sectional channel change types were observed from lidar a month after post-fire debris-flow events, including channelized and braided incision into deposits, incision into the pre-fire channel bed, bank erosion and no change. Channel changes were most correlated with pre-fire channel width, valley width and unit stream power, and these relationships could be tested in other burned locations to evaluate their transferability. Repeat channel surveys before and after snowmelt indicate rapid recovery and channel narrowing following major sediment disturbances, although sediment deposits remained in the channel margins. Together, these results highlight the importance of field and remote sensing-based channel surveys to improve understanding of, and potential to predict, mountain channel response to compounding climate disturbances.

Earth Surface Processes and Landforms↗
USGS2024

Redistribution of debris-flow sediment following severe wildfire and floods in the Jemez Mountains, New Mexico, USA

Severe fire on steep slopes increases stormwater runoff and the occurrence of runoff-initiated debris flows. Predicting locations of debris flows and their downstream effects on trunk streams requires watershed-scale high-resolution topographic data. Intense precipitation in July and September 2013 following the June 2011 Las Conchas Fire in the Jemez Mountains, New Mexico, led to widespread debris flows in the watershed of Rito de los Frijoles. We differenced lidar Digital Elevation Models (DEMs) collected in 2010 and 2016 to map subwatersheds experiencing debris flows and changes in elevation of the trunk stream. Debris flow occurrence was well predicted by previous assessments of debris-flow hazard; debris flows occurred in 7 of 9 sub-basins where the debris-flow hazard was above 60% for the 25-year rainfall event, and in 0 of 21 basins where debris flow hazard was less than 60%. Debris flows resulted in fan deposition at the confluence with the trunk stream followed by transport during three documented floods. The bed of the 22 km trunk stream increased in elevation by a mean of 0.29 m, but the local change in thalweg elevation was controlled by inputs of water and sediment and longitudinal variation in gradient. Downstream of the mouths of tributaries with debris flows, the thalweg of the trunk stream rose as much as 2 m. Downstream of the mouths of tributaries without debris flows the thalweg of the main stem degraded by as much as 2 m, mobilizing sediment that was then deposited further downstream where the gradient of the trunk stream decreases. In conclusion, the transport of sediment generated by debris flows was predictably related to spatial variation in sediment supply, discharge and gradient.

New Mexico↗
USGS2024

The feasibility of using national-scale datasets for classifying wetlands in Arizona with machine learning

The advent of machine learning techniques has led to a proliferation of landscape classification products. These approaches can fill gaps in wetland inventories across the United States (U.S.) provided that large reference datasets are available to develop accurate models. In this study, we tested the feasibility of expediting the classification process by sourcing requisite training and testing data from existing national-scale land cover maps instead of customized sample sets. We created a single map of water and wetland presence by intersecting water and wetland classes from available land cover products (National Wetland Inventory, Gap Analysis Project, National Land Cover Database and Dynamic Surface Water Extent) across the U.S. state of Arizona, which has fewer wetland-specific mapping products than other parts of the U.S. We derived classified samples for four wetland classes from the combined map: open water, herbaceous wetlands, wooded wetlands and non-wetland cover. In Google Earth Engine, we developed a random forest model that combined the training data with spatial predictor variables, including vegetation greenness indices, wetness indices, seasonal index variation, topographic parameters and vegetation height metrics. Results show that the final model separates the four classes with an overall accuracy of 86.2%. The accuracy suggests that existing datasets can be effectively used to compile machine learning training samples to map wetlands in arid landscapes in the U.S. These methods hold promise for the generation of wetland inventories at more frequent intervals, which could allow more nuanced investigations of wetland change over time in response to anthropogenic and climatic drivers.

Arizona↗
USGS2024

Correction to A regime shift in sediment export from a coastal watershed during a record wet winter, California: Implications for landscape response to hydroclimatic extremes

In the referenced article, the authors would like to correct text in the first paragraph on page 2571, Figure 9 and its caption. The changes reflect an error made in the processing of the rainfall intensity-duration data used to compare storms to published debris flow triggering thresholds. The correctly processed data does not change the interpretations made in the paper but does correctly indicate that the investigated storms did not exceed the rainfall intensity – duration threshold of Cannon (1988) but did significantly exceed the debris flow triggering threshold of Wieczorek (1987).

Earth Surface Processes and Landforms↗
USGS2025

Improving hydroacoustic methods for monitoring suspended-sand flux and grain size in sediment-laden rivers

Suspended-sand concentration and grain-size data in rivers provide valuable information on the catchment's dynamics for scientists and river managers. Producing continuous measurements of suspended-sand concentrations remains a scientific challenge due to their high spatial and temporal variability. Traditional methods such as sediment-rating curves may be highly uncertain, and optical turbidity is insensitive to coarse particles when there are many fine particles. Surrogate hydroacoustic methods aim to improve sand concentration measurements. These single- or dual-frequency acoustic methods use acoustic attenuation and/or backscatter to estimate fine-sediment (i.e., silt and clay) and/or sand concentration and possibly grain size. New methods have recently been developed and applied in rivers exhibiting a wide range of sediment conditions in North America but not independently tested elsewhere by other researchers. In this article, we apply, adapt and evaluate hydroacoustic methods to continuously estimate suspended-sand concentration and grain size in an Alpine river with high suspended-sediment concentrations. From the example of the River Isère at Grenoble Campus, France, we show that the hydroacoustic methods adapted to local conditions may yield valuable sand concentration estimates consistent with traditional measurements. Compared with prior knowledge, limited additional information on the grain size can be obtained due to high uncertainties. Hydroacoustic concentration estimates are more sensitive to real changes in concentration at the event scale than traditional rating-curve methods that relate concentration to discharge only. These findings open the perspective for facilitated sand concentration monitoring at a higher temporal resolution with decreased field work.

Grenoble Campus↗