SEARCH · Search USGS

Results for “Cretaceous Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources

USGS2012

Igneous history of the Koyukuk terrane, western Alaska: Constraints on the origin, evolution, and ultimate collision of an accreted island arc terrane

The Koyukuk terrane of western Alaska consists of volcanic, volcaniclastic, and plutonic rocks which range from Late Paleozoic to Early Cretaceous in age. The terrane crops out in a U-shaped belt which is roughly paralleled by outer belts of ultramafic rocks, oceanic plate basalts and cherts, and retrograded blueschist facies rocks of continental protolith. These rocks have been interpreted as components of a volcanic arc terrane that collided with the North American continental margin in Early Cretaceous time. The Koyukuk terrane consists of four time-stratigraphic units: (1) pre-Middle Jurassic basalts, (2) Middle and Late Jurassic granitic rocks, (3) lower Lower Cretaceous volcanic rocks, and (4) upper Lower Cretaceous volcanic rocks. Limited chemical data from the basalts of unit 1 indicate that they were erupted in a nonarc tectonic environment, possibly in an oceanic island or back arc setting. Units 2, 3, and 4 have the characteristics of subduction-related volcanic rocks (i.e., depleted Nb and Ta and enriched alkaline elements, relative to the light rare earth elements). Unit 3 contains tholeiitic, calc-alkaline, and alkaline rocks with chondrite-normalized rare earth element patterns that range from flat (La N /Yb N = 1) to highly light rare earth element enriched (La N /Yb N > 15). The highly alkaline or shoshonitic lavas were erupted toward the end of unit 3 time (Valanginian) during the final stages of arc-continent collision. These alkaline lavas could have been derived by very small degrees of partial melting of a similar source to that of the earlier arc lavas. Unit 4 lavas are also alkaline or shoshonitic, but their incompatible element composition indicates that they were derived from a different source than that of the earlier arc lavas. These late alkaline lavas are chemically similar to crosscutting mid-Cretaceous plutons whose isotopic compositions (Arth et al., this issue ( a )) suggest derivation by partial melting of distinctly older subcontinental lithosphere. We speculate that the parental magmas of unit 4 lavas may also have been derived by partial melting of this subcontinental mantle which was underthrust beneath the Koyukuk arc terrane during the final stage of arc-continent collision.

Journal of Geophysical Research Solid Earth↗

USGS1976

Pre-Eocene rocks of Java, Indonesia

The exposed pre-Eocene rocks of Java can be divided into two compound units for purposes of reconnaissance mapping and structural interpretation: a sedimentary sequence and melange. The sedimentary sequence consists of moderately deformed and little-metamorphosed conglomerate, sandstone, mudstone, claystone, chert, and limestone. The melange consists of a chaotic mechanical mixture of rocks identical to those of the sedimentary sequence and their metamorphic equivalents, such as schist, phyllite, quartzite, and marble. In addition, it contains a large proportion of quartz porphyry and smaller amounts of granite, basalt, gabbro, peridotite, pyroxenite, and serpentinite. The sedimentary sequence is at least partly of Early Cretaceous age and the melange is of Early Cretaceous to very early Paleocene age. They are overlain unconformably by Eocene rocks. The presence in the melange of blocks of quartz porphyry and granite is not easily reconcilable with current plate tectonic concepts in which the sites of formation of melange and plutonic rocks should be hundreds of kilometres apart.

Java↗

USGS2015

Geologic setting of the proposed Fallon FORGE Site, Nevada: Suitability for EGS research and development

The proposed Fallon FORGE site lies within and adjacent to the Naval Air Station Fallon (NASF) directly southeast of the town of Fallon, Nevada, within the large basin of the Carson Sink in west-central Nevada. The site is located on two parcels that include land owned by the NASF and leased and owned by Ormat Nevada, Inc. The Carson Sink in the vicinity of the Fallon site is covered by Quaternary deposits, including alluvial fan, eolian, and lacustrine sediments. Four wells penetrate the entire Neogene section and bottom in Mesozoic basement. Late Miocene to Quaternary basin-fill sediments are 0.5 to >1 km thick and overlie Oligocene-Miocene volcanic and lesser sedimentary rocks. The volcanic section is 0.5 to 1.0 km thick and dominated by Miocene mafic lavas. The Neogene section rests nonconformably on heterogeneous Mesozoic basement, which consists of Triassic-Jurassic metamorphic rocks intruded by Cretaceous granitic plutons. The structural framework is dominated by a gently west-tilted half graben cut by moderately to steeply dipping N- to NNEstriking normal faults that dip both east and west. Quaternary faults have not been observed within the proposed FORGE site. Fallon was selected for a potential FORGE site due to its extensional tectonic setting, abundance of available data, existing infrastructure, and documented temperatures, permeability, and lithologic composition of potential reservoirs that fall within the ranges specified by DOE for FORGE. Since the early 1970s, more than 45 wells have been drilled for geothermal exploration within the area. Four exploration wells within the FORGE site are available for use in the project. Several additional wells are available for monitoring outside the central FORGE site within the NASF and Ormat lease area, including numerous temperature gradient holes. There is an existing, ten-station micro-seismic earthquake (MEQ) array that has been collecting data since 2001; the MEQ array can be expanded to encompass the entire Fallon project. The well data indicate that a sizeable area (~4.5 km2 ) has adequate temperatures in crystalline basement but lacks sufficient permeability within the proposed FORGE site. There are two possible, competent target formations in Mesozoic basement for stimulation in the FORGE project area: 1) Jurassic felsic metavolcanic rocks/and or metaquartzite; and 2) Cretaceous granitic intrusions. These units make up at least 3 km3 in the project area and have target temperatures of ~175-215o C. The abundant well data and detailed geophysical surveys (e.g., gravity, MT, and seismic reflection) provide significant subsurface control for the site and will permit development of a detailed 3D model. The documented temperatures, low permeability, and basement lithologies, as well as abundant available data facilitate development of a site dedicated to testing and improving new EGS technologies and techniques, thus making Fallon an ideal candidate for FORGE.

GRC Transactions↗

USGS1998

Detailed study of selenium and selected constituents in water, bottom sediment, soil, and biota associated with irrigation drainage in the San Juan River area, New Mexico, 1991-95

In response to increasing concern about the quality of irrigation drainage and its potential effects on fish, wildlife, and human health, the U.S. Department of the Interior began the National Irrigation Water Quality Program (NIWQP) to investigate these concerns at irrigation projects sponsored by the Department. The San Juan River area in northwestern New Mexico was one of the areas designated for study. Study teams composed of scientists from the U.S. Geological Survey, the U.S. Fish and Wildlife Service, the Bureau of Reclamation, and the Bureau of Indian Affairs collected water, bottom-sediment, soil, and biological samples at 61 sites in the San Juan River area during 1993-94. Supplemental data collection conducted during 1991-95 by the Bureau of Indian Affairs and its contractor extended the time period and sampling sites available for analysis. Analytical chemistry performed on samples indicated that most potentially toxic elements other than selenium generally were not high enough to be of concern to fish, wildlife, and human health. Element concentrations in some water, bottom-sediment, soil, and biological samples exceeded applicable standards and criteria suggested by researchers in current literature. Selenium concentrations in water samples from 28 sites in the study area exceeded the 2-microgramper-liter (lg/L) wildlife-habitat standard. Vanadium concentrations in water exceeded the 100-Kg/L standard for livestock-drinking water at one site. In biota, selenium and aluminum concentrations regularly equaled or exceeded avian dietary threshold concentrations. In bottom sediment and soil, element concentrations above the upper limit of the baseline range for western soils were: selenium, 24 exceedances; lead, 2 exceedances; molybdenum, 2 exceedances;strontium, 4 exceedances; and zinc, 4 exceedances. Concentrations of total selenium in bottom-sediment and soil samples were significantly greater for Cretaceous than for non-Cretaceous soil types in the study area and were generally similar for habitats within and outside irrigation-affected areas. Mean and median total-selenium concentrations in samples from areas with Cretaceous soil types were 4.6 and 2.2 micrograms per gram (ps/g), respectively. Mean and median total-selenium concentrations in samples from areas with non-Cretaceous soil types were 0.6 and 0.15 pg/g, respectively. Samples from the study area had low concentrations of organic constituents. Organochlorine pesticides and polychlorinated biphenyls were detected in a few biological samples at low concentrations. Polycyclic aromatic hydrocarbon (PAH) compounds were not detected in whole-water samples collected using conventional water-sampling techniques. In tests involving the use of semipermeable-membrane devices to supplement conventional water assays for PAH's, low concentrations of PAH's were found at several locations in the Hammond Irrigation Supply Canal, but were not detected in the Hammond ponds at the downstream reach of the Hammond irrigation service area. PAH compounds do not appear to reach the San Juan River through the Hammond Canal. Data indicate that water samples from irrigation-drainage-affected habitats had increased mean selenium concentrations compared with samples from irrigation-delivery habitat. The mean selenium concentration in water was greatest at seeps and tributaries draining irrigated land (17 μg/L); less in irrigation drains and in ponds on irrigated land (61.tg/L); and least in backwater, the San Juan River, and irrigation-supply water (0.5 - 0.6 μg/L). Statistical tests imply that irrigation significantly increases selenium concentrations in water samples when a Department of the Interior irrigation project is developed on selenium-rich sediments. Water samples from sites with Cretaceous soils had significantly greater selenium concentrations than water samples from sites with non-Cretaceous soils. Water samples from Department of the Interior project irrigation-drainage sites developed on Cretaceous soils contained a mean selenium concentration about 10 times greater than those in samples from Department of the Interior project sites developed on non-Cretaceous soils. Selenium was much less concentrated in water than in bottom sediment, soil, or biota in the study area. The range in concentrations of dissolved selenium in water was less than 1 ptg/L to 37 1.1g/L (less than 1 to 37 parts per billion). The range in concentrations of total selenium in bottom sediment and soil was less than 0.1 to 23lig/g (less than 100 to 23,000 parts per billion). The range in concentration of selenium in biota was less than 0.1 to 24.0 fig/g (less than 100 to 24,000 parts per billion). Data indicated that bioaccumulation and leaching from soil were the important processes at the study area that lead to elevated levels of selenium. Other processes examined included: (1) evapoconcentration of selenium; (2) atmospheric deposition of aerosols containing selenium; and (3) contamination of surface water by point-source or non-point-source discharges. Selenium concentrations in biological samples were evaluated by a number of variables including: (1) media sampled (emergent and submergent plants, nektonic and benthic invertebrates, omnivore/herbivore and carnivore fish, and terrestrial and aquatic amphibians); (2) habitat (San Juan River main-stem reaches, backwaters, tributary reaches, irrigation delivery or drainage canals, and ponds); (3) irrigation project area and reference sites; and (4) soil type (non-Cretaceous or Cretaceous soils). Graphical techniques and nonparametric statistical tests were applied to determine the influence of selected physiographic variables on selenium concentrations in biological samples collected in the San Juan River area. Species of sucker and of smaller fish contained significantly higher selenium concentrations in the upstream portion of the river where a productive community of plants and animals is found that is associated with warming, nutrient-rich waters discharged from an upstream reservoir. Selenium concentrations in algae, odonates, and mosquitofish collected from both irrigation-drain and pond habitats underlain by Cretaceous soils were significantly greater than in those collected from similar habitats underlain by non-Cretaceous soils. Investigators conclude that the major factor affecting the variability of selenium accumulation in biota at aquatic habitats was the presence of underlying Cretaceous soils. Median selenium concentrations were less than 2 lAg/g for plant samples, less than 7 μg/g for invertebrate samples, and less than 6 lAg/g for whole-fish samples collected from aquatic habitats underlain by non-Cretaceous soils. Similar samples collected from aquatic habitats underlain by Cretaceous soils contained median selenium concentrations two to five times greater. Leaching of selenium from Cretaceous soils in the San Juan River area increases the accumulation of selenium concentrations in the biota and thereby increases the exposure and potential health risks associated with selenium to migratory birds, fish, and other wildlife that use these aquatic habitats extensively. Aquatic habitats presenting the greatest average exposure to excess selenium concentrations in the diets of resident wildlife are from consumption of plants, invertebrates, and fish at irrigation-drain habitats underlain by Cretaceous soils. Of the irrigation projects evaluated in the San Juan River area, the highest median selenium concentrations in algae, cattail leaves, odonate nymphs, mosquitofish, and leopard frog samples from the study area were collected from the east hogback irrigation drain.

New Mexico↗

USGS2018

New data yield new geologic insights at the Fallon FORGE site, Carson Sink Region, Nevada

The geologic structure beneath the Fallon Frontier Observatory for Research in Geothermal Energy (FORGE) site represents a record of the Mesozoic through Cenozoic tectonism, volcanism, and sedimentation that has affected the Carson Sink local to Fallon, NV. A robust dataset confirms that the lithologic sequence consists of Quaternary through Miocene sedimentary and volcanic rocks resting non-conformably on Mesozoic crystalline basement. The basement consists of four lithologic units; 1) Triassic-Jurassic low-to-medium grade meta-rhyolites, 2) Jurassic low-to-medium grade quartzites and other metamorphosed marine sedimentary rocks, and 3) Jurassic low-to-medium grade meta-basalt and -basaltic-andesite lavas, all intruded by 4) Jurassic-Cretaceous quartz monzonite. The geologic section dips ~20-25° west, tilting that was accommodated by a predominant system of north-to-north-northeast striking, east and west moderately-to-steeply dipping normal faults. The above, relatively broad-scale characteristics of the geologic framework of the Fallon site have been developed throughout the ~3 year duration of the project. With the collection of new data and re-analysis of existing data in Phase 2B of the Fallon FORGE project, our detailed understanding of the relatively finer-scale aspects of the geologic framework, including aspects of the stratigraphic sequence and the locations and attitudes of individual faults have evolved and an updated 3D geologic map has been developed. Here, we compare the Phase 1 3D geologic map to the Phase 2B 3D geologic map and demonstrate the evolution of our understanding of the geologic framework of the Fallon site and the value of the new data that was collected in Phase 2B in developing this updated framework.

Geothermal Resources Council Transactions↗

USGS1973

Soda Creek springs - metamorphic waters in the eastern Alaska Range

The Soda Creek springs are a group of small, cold mineral springs on the southern flank of the eastern Alaska Range. The spring waters contain anomalous concentrations of carbon dioxide, sodium, chlorine, sulfate, boron, and ammonia and are actively precipitating deposits of calcite and aragonite. Sparingly present in these deposits are mixed-layer illite-montmorillonite clays and zeolite minerals. Low-temperature metamorphic reactions in subjacent marine sedimentary rocks of Jurassic and Cretaceous age may have produced the fluids and silicate minerals. With only a few exceptions, cool bicarbonate-rich springs in Alaska are concentrated south of the Denali fault system in south-central Alaska, southeastern Alaska, and along the Kaltag-Tintina fault system. These areas are characterized by active or recently active tectonism, major faults and folds, and an abundance of marine sedimentary rocks.

Alaska↗

USGS1974

Structure and development of the southern Moroccan continental shelf

The structure of the continental shelf off southern Morocco was studied by means of 2,100 km of seismic reflection profiles, magnetic and bathymetric surveys, and dredge samples. The research area lies off four geologic divisions adjacent to the coast: the Atlas Mountains; the Souss Trough; the Anti-Atlas Mountains; and the Aaiun Basin. The continental shelf, along with the western Atlas Mountains, the western Souss Trough, and the entire Aaiun Basin, has subsided along a normal fault-flexure system. This system runs along the shore at the Anti-Atlas Mountains, and cuts off this cratonic block from the shelf subsidence. The shelf is narrow and characterized by out-building off the Anti-Atlas range, whereas it is broader and characterized by upbuilding to the north and south. Deposition was essentially continuous at least from Early Cretaceous through Eocene time. Published work suggests that the last cycle of sedimentation began during Permian rifting. After Eocene time, most sediments carried to the shelf must have bypassed it and gone to construct the slope and rise or to the deep sea. Tertiary orogenies caused extensive folding of Mesozoic and early Tertiary deposits off the Atlas Mountains.

Marine Geology↗

USGS2024

Paleogene Earth perturbations in the US Atlantic Coastal Plain (PEP-US): Coring transects of hyperthermals to understand past carbon injections and ecosystem responses

The release of over 4500 Gt (gigatonnes) of carbon at the Paleocene–Eocene boundary provides the closest geological analog to modern anthropogenic CO 2 emissions. The cause(s) of and responses to the resulting Paleocene–Eocene Thermal Maximum (PETM) and attendant carbon isotopic excursion (CIE) remain enigmatic and intriguing despite over 30 years of intense study. CIE records from the deep sea are generally thin due to its short duration and slow sedimentation rates, and they are truncated due to corrosive bottom waters dissolving carbonate sediments. In contrast, PETM coastal plain sections along the US mid-Atlantic margin are thick, generally having an expanded record of the CIE. Drilling here presents an opportunity to study the PETM onset to a level of detail that could transform our understanding of this important event. Previous drilling in this region provided important insights, but existing cores are either depleted or contain stratigraphic gaps. New core material is needed for well-resolved marine climate records. To plan new drilling, members of the international scientific community attended a multi-staged, hybrid scientific drilling workshop in 2022 designed to maximize not only scientifically and demographically diverse participation but also to protect participants' health and safety during the global pandemic and to reduce our carbon footprint. The resulting plan identified 10 sites for drill holes that would penetrate the Cretaceous–Paleogene (K–Pg) boundary, targeting the pre-onset excursion (POE), the CIE onset, the rapidly deposited Marlboro Clay that records a very thick CIE body, and other Eocene hyperthermals. The workshop participants developed several primary scientific objectives related to investigating the nature and the cause(s) of the CIE onset as well as the biotic effects of the PETM on the paleoshelf. Additional objectives focus on the evidence for widespread wildfires and changes in the hydrological cycle, shelf morphology, and sea level during the PETM as well as the desire to study both underlying K–Pg sediments and overlying post-Eocene records of extreme hyperthermal climate events. All objectives address our overarching research question: what was the Earth system response to a rapid carbon cycle perturbation?

Scientific Drilling↗

USGS1977

A new curved baculite from the Upper Cretaceous of Wyoming

Baculites reduncus , n. sp., is a moderately large ammonite that has a curved shell, a large angle of taper, and a stout ovate cross section. Conspicuous broad, arcuate ribs cross the upper two-thirds of the flank. The suture, which is fairly complex, has a distinctive lateral lobe. All the types are from the lower part of the Rock River Formation near Rock River, Wyo. The species is of late Campanian age and marks a zone between the Zones of Baculites gregoryensis Cobban and B. scotti Cobban

Wyoming, Colorado↗

USGS2011

Tectonic setting of Cretaceous basins on the NE Tibetan Plateau: Insights from the Jungong basin

Quantifying the Cenozoic growth of high topography in the Indo‐Asian collision zone remains challenging, due in part to significant shortening that occurred within Eurasia before collision. A growing body of evidence suggests that regions far removed from the suture zone experienced deformation before and during the early phases of Himalayan orogenesis. In the present‐day north‐eastern Tibetan Plateau, widespread deposits of Cretaceous sediment attest to significant basin formation; however, the tectonic setting of these basins remains enigmatic. We present a study of a regionally extensive network of sedimentary basins that are spatially associated with a system of SE‐vergent thrust faults and are now exposed in the high ranges of the north‐eastern corner of the Tibetan Plateau. We focus on a particularly well‐exposed basin, located ∼20 km north of the Kunlun fault in the Anyemaqen Shan. The basin is filled by ∼900 m of alluvial sediments that become finer‐grained away from the basin‐bounding fault. Additionally, beds in the proximal footwall of the basin‐bounding fault exhibit progressive, up‐section shallowing and several intraformational unconformities which can be traced into correlative conformities in the distal part of the basin. The observations show sediment accumulated in the basin during fault motion. Regional constraints on the timing of sediment deposition are provided by both fossil assemblages from the Early Cretaceous, and by K–Ar dating of volcanic rocks that floor and cross‐cut sedimentary fill. We argue that during the Cretaceous, the interior NE Tibetan Plateau experienced NW–SE contractional deformation similar to that documented throughout the Qinling–Dabie orogen to the east. The Songpan‐Ganzi terrane apparently marked the southern limit of this deformation, such that it may have been a relatively rigid block in the Tibetan lithosphere, separating regions experiencing deformation north of the convergent Tethyan margin from regions deforming inboard of the east Asian margin.

Basin Research↗

USGS2022

Geologic map of the Stibnite mining area, Valley County, Idaho

The Stibnite mining area, as used herein, is bounded by the map extent that includes the Yellow Pine, West End, and Hangar Flats ore bodies. Other ore bodies are nearby, but the purpose of this map is to offer a detailed (1:8,000 scale) geologic map with new cross sections in the immediate area of Stibnite, Idaho. This geologic map is very similar to the Stibnite quadrangle map (Stewart and others, 2016) particularly the units and structure descriptions, because of the overlap of map extent. The new work by the author includes: (1) the topographic lines generated from the LiDAR base (courtesy of Midas Gold Corporation); (2) additional structural measurements; (3) revision of geologic unit contact placements particular around West End and Stibnite pits among other locations; and (4) seven new cross sections. New structural measurements from field work account for 20 percent of measurements shown with the remaining from Midas Gold Corp., Smitherman (1985), and the Stibnite quadrangle map (Stewart and others, 2016). Locations of many shallow features in the cross sections are controlled by core logs of 48 drillholes provided by Midas Gold Corp. The logs include dike placement, dike to plutonic bodies relationships, metasedimentary body localities, and dips of stratigraphic units. The law of sines was used to calculate dip of contacts between metasedimentary units for each cross section. Other features at depth in the cross sections are schematic based on nearby surface features and overall geologic interpretation. The map area contains metamorphosed sediments of Neoproterozoic and Paleozoic age within the Stibnite roof pendant. This rock package is open to tightly folded and reached lower amphibolite facies metamorphism during the Cretaceous Period. Most of the metasedimentary rocks are nearly vertical to overturned and young to the southwest, except on the southwestern flank of the Garnet Creek syncline. Pulses of the Idaho batholith granitoids intruded the metasedimentary units found in the Stibnite roof pendant. Faulting with apparent reverse, normal, and/or strike-slip offset are all present within the map area. Mineralization is largely fault controlled with some stratigraphic control. Volumetrically minor dikes, sills, and small intrusions are of Eocene age, and these intrusions are mostly depicted on the cross sections. Quaternary surficial deposits occur in stream beds and glaciated areas. Field work was conducted during the summers of 2013, 2015, and 2016. For consistency with recent research, most of the Stibnite quadrangle geologic map units (Stewart and others, 2016) are used for this geologic map. Intrusive units Kqd and Tba are new. The additional geologic mapping by the authors and compilation of detailed geologic maps from Midas Gold Corp. enhanced resolution. Cross sections incorporated drill core data including rock type, unit thickness, and oriented structural measurements offering detailed subsurface control. Data access was courtesy of Midas Gold Corp. Reed S. Lewis, Russell V. Di Fiori, and Claudio Berti provided constructive reviews that significantly improved this maps and cross sections. Previous studies that focus on mineralization include Schrader and Ross (1925), Currier (1935), White (1940), Cooper (1951), Cookro and others (1988), and more recently Gillerman and others (2019). Digital map files are available online (Wintzer, 2022).

Idaho↗

USGS2019

Chesapeake Bay impact structure—Development of "brim" sedimentation in a multilayered marine target

The late Eocene Chesapeake Bay impact structure was formed in a multilayered target of seawater underlain sequentially by a sediment layer and a rock layer in a continental-shelf environment. Impact effects in the “brim” (annular trough) surrounding and adjacent to the transient crater, between the transient crater rim and the outer margin, primarily were limited to the target-sediment layer. Analysis of published and new lithostratigraphic, biostratigraphic, sedimentologic, petrologic, and mineralogic studies of three core holes, and published studies of a fourth core hole, provided information for the interpretation of the impact processes, their interactions and relative timing, their resulting products, and sedimentation in the brim. Most studies of marine impact-crater materials have focused on those found in the central crater. There are relatively few large, complex marine craters, of which most display a wide brim around the central crater. However, most have been studied using minimal data sets. The large number of core holes and seismic profiles available for study of the Chesapeake Bay impact structure presents a special opportunity for research. The physical and chronologic records supplied by study of the sediment and rock cores of the Chesapeake Bay impact indicate that the effects of the initial, short-lived contact and compression and excavation stages of the impact event primarily were limited to the transient crater. Only secondary effects of these processes are evident in the brim. The preserved record of the brim was created primarily in the subsequent modification stage. In the brim, the records of early impact processes (e.g., outgoing tsunamis, overturned flap collapse) were modified or removed by later processes. Transported and rotated, large and small clasts of target sediments, and intervals of fluidized sands indicate that seismic shaking fractured and partially fluidized the Cretaceous and Paleogene target sediments, which led to their inward transport by collapse and lateral spreading toward the transient crater. The succeeding inward seawater-resurge flow quickly overtook and interacted with the lateral spreading, further facilitating sediment transport across the brim and into the transient crater. Variations in the cohesion and relative depth of the target sediments controlled their degree of disaggregation and redistribution during these events. Melt clasts and shocked and unshocked rock clasts in the resurge sediments indicate fallout from the ejecta curtain and plume. Basal parautochthonous remnant sections of target Cretaceous sediments in the brim thin toward the collapsed transient crater. Overlying seawater-resurge deposits consist primarily of diamictons that vary laterally in thickness, and vertically and laterally in maximum grain size. After cessation of resurge flow and re-establishment of pre-impact sea level, sandy sediment gravity flows moved from the margin to the center of the partially filled impact structure (shelf basin). The uppermost unit consists of stratified sediments deposited from suspension. Postimpact clayey silts cap the crater fill and record the return to shelf sedimentation at atypically large paleodepths within the shelf basin. An unresolved question involves a section of gravel and sand that overlies Neoproterozoic granite in the inner part of the brim in one core hole. This section may represent previously unrecognized, now parautochthonous Cretaceous sediments lying nonconformably above basement granite, or it may represent target sediments that were moved significant distances by lateral spreading above basement rocks or above a granite megaclast from the overturned flap. The Chesapeake Bay impact structure is perhaps the best documented example of the small group of multilayer, marine-target impacts formed in continental shelves or beneath epeiric seas.

Chesapeake Bay↗

USGS2019

Three-dimensional basin and fault structure from a detailed seismic velocity model of Coachella Valley, Southern California

The Coachella Valley in the northern Salton Trough is known to produce destructive earthquakes, making it a high seismic hazard area. Knowledge of the seismic velocity structure and geometry of the sedimentary basins and fault zones is required to improve earthquake hazard estimates in this region. We simultaneously inverted first P wave travel times from the Southern California Seismic Network (39,998 local earthquakes) and explosions (251 land/sea shots) from the 2011 Salton Seismic Imaging Project to obtain a 3-D seismic velocity model. Earthquakes with focal depths ≤10 km were selected to focus on the upper crustal structure. Strong lateral velocity contrasts in the top ~3 km correlate well with the surface geology, including the low-velocity (<5 km/s) sedimentary basin and the high-velocity crystalline basement rocks outside the valley. Sediment thickness is ~4 km in the southeastern valley near the Salton Sea and decreases to <2 km at the northwestern end of the valley. Eastward thickening of sediments toward the San Andreas fault within the valley defines Coachella Valley basin asymmetry. In the Peninsular Ranges, zones of relatively high seismic velocities (~6.4 km/s) between 2 to 4 km depth may be related to Late Cretaceous mylonite rocks or older inherited basement structures. Other high-velocity domains exist in the model down to 9 km depth and help define crustal heterogeneity. We identify a potential fault zone in Lost Horse Valley unassociated with mapped faults in Southern California from the combined interpretation of surface geology, seismicity, and lateral velocity changes in the model.

California↗

USGS2012

Tectonics and conductivity structures in the Southern Washington Cascades

The tectonic setting of the southern Washington Cascades has been studied with the aid of magnetotelluric (MT) and other geophysical data. The main feature of interest in the geophysical data is a broad high-conductivity anomaly mapped with MT and geomagnetic variation (GMV) data. This anomaly is located roughly within the triangle formed by the volcanoes Mount Rainier, Mount St. Helens, and Mount Adams but exceeds beyond Mount Rainier to the northwest. We interpret the cause of the anomaly to be conductive rocks with resistivities of 1–4 ohm m and thicknesses possibly greater than 15 km. These conductive rocks are found 2–8 km beneath the overlying less conductive volcanic and sedimentary rocks at the surface. Two aeromagnetic lows follow the trend of the conductivity anomaly, and linear belts of strike-slip seismicity are coincident with both these magnetic lows. One of the aeromagnetic lows is coincident with the western margin of the conductivity anomaly. The geophysical data appear to outline a suture zone of probable Eocene age caused by accretion of a large seamount complex (Siletzia) and that may contain large thicknesses of compressed forearc basin and accretionary prism sedimentary rocks of Cretaceous to Eocene age. Part of the shallower conductive rocks may be associated with carbonaceous continental and transitional marine sedimentary rocks of the Puget Group. The contact between the hypothesized compressed basin and the accreted terranes to the west may localize the release of shear stresses in this region of oblique subduction. Several possible explanations for the conductivity anomaly are considered in addition to the compressed basin hypothesis.

Washington↗

USGS2011

East Antarctic rifting triggers uplift of the Gamburtsev Mountains

The Gamburtsev Subglacial Mountains are the least understood tectonic feature on Earth, because they are completely hidden beneath the East Antarctic Ice Sheet. Their high elevation and youthful Alpine topography, combined with their location on the East Antarctic craton, creates a paradox that has puzzled researchers since the mountains were discovered in 1958. The preservation of Alpine topography in the Gamburtsevs may reflect extremely low long-term erosion rates beneath the ice sheet, but the mountains’ origin remains problematic. Here we present the first comprehensive view of the crustal architecture and uplift mechanisms for the Gamburtsevs, derived from radar, gravity and magnetic data. The geophysical data define a 2,500-km-long rift system in East Antarctica surrounding the Gamburtsevs, and a thick crustal root beneath the range. We propose that the root formed during the Proterozoic assembly of interior East Antarctica (possibly about 1 Gyr ago), was preserved as in some old orogens and was rejuvenated during much later Permian (roughly 250 Myr ago) and Cretaceous (roughly 100 Myr ago) rifting. Much like East Africa, the interior of East Antarctica is a mosaic of Precambrian provinces affected by rifting processes. Our models show that the combination of rift-flank uplift, root buoyancy and the isostatic response to fluvial and glacial erosion explains the high elevation and relief of the Gamburtsevs. The evolution of the Gamburtsevs demonstrates that rifting and preserved orogenic roots can produce broad regions of high topography in continental interiors without significantly modifying the underlying Precambrian lithosphere.

Nature↗

USGS1978

Age and composition of igneous rocks, Edna Mountain quadrangle, Humboldt County, Nevada

Six pulses of igneous activity ranging in age from Jurassic to Pliocene have been identified in the Edna Mountain quadrangle, Humboldt County, Nev. Porphyritic syenite am! quartz monzonite of Jurassic age (146-164 million years) at Buffalo Mountain are highly potassic through a wide range in SiO 2 content from olivine-bearing syenite to quartz-rich monzonite, and their composition contrasts sharply with plutons elsewhere in north-central Nevada. Granodiorite and quartz monzonite plutons of Cretaceous age (88- 106 m.y.) are chemically and mineralogically similar to other calc-alkaline plutons in north-central Nevada. Four episodes of Tertiary volcanism include rhyolite ashflow tuffs and slightly younger andesitic basalt flows and tuffs of Oligocene age, rhyolite vitrophyre of late Miocene age, and olivine basalt flows of Pliocene age. Their age and mineralogical and chemical compositions are similar to other Tertiary volcanic rocks in north-central Nevada.

Nevada↗

USGS1973

The Late Cretaceous ammonite Baculites undatus Stephenson in Colorado and New Mexico

Baculites undatus Stephenson, originally described from the Nacatoch Sand of northeastern Texas, has been found in the Pierre Shale at 25 localities in Colorado and two in New Mexico. An early form of the species occurs in the zone of Didymoceras cheyennense (Meek and Hayden), and the typical form occurs in the overlying zones of Baculites compressus Say, B. cuneatus Cobban, and B. reesidei Elias. The species is characterized by its stout cross section, broad venter, conspicuous lateral and ventral ribs, and suture of about average complexity for the genus.

Colorado, Wyoming, New Mexico↗

USGS2012

The McKinley Sequence of granitic rocks: A key element in the accretionary history of southern Alaska

The McKinley sequence of granitic rocks consists of several discrete plutons in the central Alaska Range. Most of these plutons crop out south of the Denali fault system (DFS) in the Talkeetna quadrangle. Plutons of the McKinley sequence largely intrude deformed upper Meszoic flysch between the DFS and the northern edges of Wrangellia and the Peninsular terrane, which jointly make up the Talkeetna superterrane. The average K-Ar age of biotite from nine granites of the McKinley sequence is 57.3 Ma; Rb-Sr data for whole rock samples indicate that the McKinley sequence cannot be older than 60 Ma. A selected suite of 20 samples of granite and granodiorite range in SiO 2 from 65.9 to 77.6%. All 20 samples are corundum normative, and 18 are moderately peraluminous. Initial 87 Sr/ 86 Sr ratios range from 0.7054 to 0.7085. The σ 18 O values range from +11.2 to +14.6‰. These high and variable Sr isotopic ratios, peraluminous nature, rare earth element patterns, and high σ 18 O values suggest that granitic rocks of the McKinley sequence crystallized from hybrid magmas produced by assimilation of sedimentary rocks by a mantle-derived melt. Mesozoic flysch is the likely source of the crustal component of the hybrid magmas. Geologic evidence suggests that the Talkeetna superterrane collided with stable Alaska after Early Cretaceous time. The flysch basin, lying south of stable Alaska, was closed by northward movement of the Talkeetna superterrane; maximum age for basin closure and terrane accretion is middle Cretaceous (Cenomanian). Paleomagnetic evidence indicates that all terranes north of the DFS have been part of stable Alaska since the Paleocene and that northward movement of Wrangellia was completed by 50 Ma. Granitic rocks of the McKinley sequence may be products of terrane accretion; the granitic rocks crystallized from hybrid magmas produced during terrane collision and deformation of the flysch basin. Isotopic ages of the McKinley sequence establish the time of final accretion of the Talkeetna superterrane as Paleocene.

Journal of Geophysical Research Solid Earth↗