Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Geophysical Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69Linked to original sources
USGS2012

Postseismic deformation following the 1989 (M = 7.1): Loma Prieta, California, earthquake

Postseismic deformation along a 90‐km profile bisecting the projected surface trace of the coseismic rupture of the 1989 Loma Prieta earthquake has been monitored by frequent GPS surveys for 3.3 years following the earthquake. In addition to the expected deformation associated with secular strain accumulation on the San Andreas and Calaveras faults, deformation associated with postseismic readjustment has been detected. Most of that deformation can be attributed to 1.5 m right‐lateral and 0.9 m reverse postseismic slip on a 5‐km‐wide downdip extension of the Loma Prieta rupture. In addition, there seems to be a 0.1 m postseismic collapse of the Loma Prieta rupture zone in the direction perpendicular to the plane of the rupture. The fault‐normal (N48°E) surface displacements plotted as a function of time exhibit a curvature suggesting a relaxation time of about 1.4 years. Similar plots of the fault‐parallel (N42°W) displacement components do not exhibit significant curvature. Presumably, the deformation shown in those plots is dominated by secular strain accumulation along the San Andreas and Calaveras faults rather than postseismic relaxation.

California↗
USGS2012

The seismic velocity structure of the Newfoundland Appalachian orogen

The deep structure of the Newfoundland Appalachian orogen is investigated by analyses of three intersecting seismic refraction/wide-angle reflection profiles which traverse the Gander and Dunnage zones or central mobile belt of Newfoundland. A simultaneous travel time inversion for velocity and interface was applied to the in-line seismic refraction/wide-angle reflection data and constrained by synthetic amplitude models. The results of the modeling procedure show a subhorizontally layered crust with upper crustal velocities ranging from 5.4 to 6.2 km/s, a midcrustal velocity of 6.25–6.35 km/s, and a lower crustal velocity of 6.7±0.2 km/s. The top of the lower crust is marked by a series of prominent reflections between 18 and 23 km depth which suggest a complex layered velocity interface. Strong laterally coherent Moho reflections indicate a sharp crust-mantle transition at 35 ± 3 km. The uppermost mantle has a velocity of 8.0±0.2 km/s, and a reflecting horizon at 55 km depth suggests an increase to velocities approaching 8.5 km/s. Normal moveout corrections applied to fan profiles provide constraining evidence for the reflecting horizon at the top of the lower crust and laterally continuous Moho reflections at 11–12 s two-way travel time. Comparisons with a coincident deep seismic reflection profile show that the refraction and reflection Mohos match to better than 2–3 km. Bulk Poisson's ratios of 0.23–0.24 for the whole crust calculated from P m P / S m S travel times suggest a crust dominated by quartzofeldspathic lithologies and a notable absence of voluminous mafic additions to the lower crust. The absence of a deep crustal root, coupled with the bulk intermediate composition inferred for the lower crust from the seismic refraction/wide-angle data, implies that the crust beneath central Newfoundland has undergone multiple periods of reactivation and equilibration following successive orogenic episodes.

Newfoundland and Labrador↗
USGS2008

Aeromagnetic evidence for a buried Early Cretaceous magmatic arc, northeast Japan

Positive aeromagnetic anomalies, recent drilling, and models constructed from these data delineate the plutonic roots of the Early Cretaceous Kitakami magmatic arc in northeast Japan. Buried plutons, mostly offshore, produce belts of positive magnetic anomalies. These anomalies and magnetotelluric data suggest that the plutons form a batholith 70–120 km wide, nearly 800 km long, and 10–15 km thick. The batholith may mark the location of the main Kitakami arc. Most of the exposed Kitakami plutons are 2–20 km in diameter; some are 3 km thick. The small plutons line up along NW trending faults; some may have been satellite vents that tapped into the magma supply of the main arc. The batholithic roots of the main arc now compose almost half of the modern Japan forearc basement. Steep magnetic gradients, offset anomalies, and basin stratigraphy portray extensive faulting of the Kitakami batholith during oblique subduction in the Late Cretaceous and rifting in the Miocene. The eastern boundary of the Kitakami batholith lies between 90 and 140 km west of the modern trench, much closer than the 300-km distance between the active arc and trench. The Early Cretaceous forearc basin and accretionary prism may underlie the modern forearc basin east of the batholith, but clear evidence is lacking. Much of the Early Cretaceous margin, including most of its forearc therefore is missing. How the material was removed is unknown: it could have been strike-slip faulted, eroded by subduction-related processes, or both.

Journal of Geophysical Research B: Solid Earth↗
USGS2008

Introduction to the special section northeast Japan: A case history of subduction

Subduction-related tectonic events such as strike-slip faulting, uplift of high-pressure metamorphic rocks in the forearc, back arc spreading, arc magmatism, and continental collisions have shaped northeast Japan, making it a case history for subduction. Much of the record of these events is preserved and can be used to reconstruct the tectonic history of the region. Although many geological, geophysical, and geochemical data have been collected in Japan for the last 30 years, interpretation of these data into a plate tectonic context did not really begin until about 10 years ago. Much of the data and interpretation on northeast Japan have been published in Japanese or as individual local studies. The primary goal of this special section is to present new investigations covering a wide range of topics and scales and place them in a tectonic framework. The papers in this special section focus on three main subjects: Mesozoic aspects of northeast Japan; the relation of Japan Sea opening with the tectonics and geochemistry of northeast Japan in the Tertiary; and the geophysical setting. The purpose of this overview is to link these subjects and provide a tectonic framework for north- east Japan and eastern Asia since the Mesozoic.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Strain accumulation along the Laguna Salada Fault, Baja California, Mexico

Strain accumulation observed over the 1978–1991 interval in a 30×100 km aperture trilateration network spanning the Laguna Salada fault is described by the principal strain rates 0.101±0.012 strain/yr N80°E±2° and −0.021±0.012 strain/yr N10°W±2°, extension reckoned positive. These strain accumulation rates have been corrected to remove coseismic effects of the nearby 1979 Imperial Valley ( = 6.5), 1980 Victoria (Baja California) ( = 6.4), 1987 Superstition Hills ( = 6.5), and 1987 Elmore Ranch ( = 5.9) earthquakes. The observed strain rates indicate extension at a rate of about 0.08 strain/yr perpendicular to the trend (N35°W) of the Salton trough as well as a right‐lateral tensor shear strain rate 0.05 strain/yr across it. The extension perpendicular to the trough is observed neither farther north near the Salton Sea nor farther south across the Gulf of California. However, Holocene slip on the Laguna Salada fault, about equal parts right‐lateral and normal slip, is consistent with the observed strain accumulation. A simple dislocation model intended to explain the observed strain accumulation as a product of slip at depth on the Laguna Salada fault would require that the fault be listric.

California↗
USGS2012

Seismic refraction measurements within the Peninsular terrane, south central Alaska

We present an interpretation of crustal seismic refraction data from the Peninsular terrane, one of the many exotic terranes that have been accreted to the continental margin of southern Alaska in the past 200 m.y. A seismic refraction line was collected along the Glenn Highway in the Copper River Basin of south central Alaska in 1984 and 1985, as part of the U.S. Geological Survey Trans‐Alaska Crustal Transect (TACT) program. P wave velocities of 2.7–3.5 km/s and thicknesses of 1–2 km characterize post‐Lower Jurassic sedimentary rocks that underlie most of the seismic refraction line. An average crustal velocity structure includes the following five velocity divisions. Beneath the sedimentary rocks lie 1–2 km of 4.0–4.6 km/s materials, correlating with andesitic volcaniclastic sedimentary rocks and lava flows of the Lower Jurassic Talkeetna Formation. Below these rocks, seismic velocity increases rapidly, from 5.0 to 6.1 km/s, in 2–3 km. At 7–8 km depth, velocity jumps to 6.3 km/s and increments to 6.6 km/s by 10–12 km depth. Velocities increase from 6.8 to 7.0 km/s between 12 to 20 km depth. At about 22 km depth, a jump in velocity from 7.0 to 7.4 km/s is inferred but is poorly resolved. Depth to the Moho discontinuity could not be determined from our data. The absence of clear PmP reflections may indicate that Moho is deeper than 40 km. Data from two offset shotpoints northeast of the line and within the Wrangellia terrane constrain the deep structure transition between Peninsular and Wrangellia terranes. The 6.3–6.6 km/s material thickens to the northeast, toward the suture between Peninsular and Wrangellia terranes, but southwest of its mapped trace at the West Fork fault. Peninsular terrane crustal structure appears dissimilar to that of continental interiors. It is similar to velocity structures determined for accreted island arc fragments in California, such as the basement of the Great Valley and the Klamath Mountains.

Alaska↗
USGS2012

Three-dimensional modeling of pull-apart basins: implications for the tectonics of the Dead Sea Basin

We model the three-dimensional (3-D) crustal deformation in a deep pull-apart basin as a result of relative plate motion along a transform system and compare the results to the tectonics of the Dead Sea Basin. The brittle upper crust is modeled by a boundary element technique as an elastic block, broken by two en echelon semi-infinite vertical faults. The deformation is caused by a horizontal displacement that is imposed everywhere at the bottom of the block except in a stress-free “shear zone” in the vicinity of the fault zone. The bottom displacement represents the regional relative plate motion. Results show that the basin deformation depends critically on the width of the shear zone and on the amount of overlap between basin-bounding faults. As the width of the shear zone increases, the depth of the basin decreases, the rotation around a vertical axis near the fault tips decreases, and the basin shape (the distribution of subsidence normalized by the maximum subsidence) becomes broader. In contrast, two-dimensional plane stress modeling predicts a basin shape that is independent of the width of the shear zone. Our models also predict full-graben profiles within the overlapped region between bounding faults and half-graben shapes elsewhere. Increasing overlap also decreases uplift near the fault tips and rotation of blocks within the basin. We suggest that the observed structure of the Dead Sea Basin can be described by a 3-D model having a large overlap (more than 30 km) that probably increased as the basin evolved as a result of a stable shear motion that was distributed laterally over 20 to 40 km.

Dead Sea Basin↗
USGS2012

Relation of peralkaline magmatism to heterogeneous extension during the Middle Miocene, southeastern Nevada

Volcanism migrated southward in the northern Basin and Range province in the Oligocene and early Miocene to produce voluminous calcalkaline silicic ash flow tuffs. Alkaline volcanism became dominant by middle Miocene (17–14 Ma) as smaller volumes of rhyolite-trachyte-basalt suites were erupted from the relatively small Kane Springs Wash caldera complex including the Narrow Canyon, Boulder Canyon, and Kane Springs Wash calderas in southeastern Nevada. Only minor extension affected the Kane Wash area before the end of calcalkaline activity, but extension expressed by rate of progressive stratal tilt peaked (15–13.5 Ma) with peralkaline magmatism (14.7–14.4 Ma). Variations in distribution, degree, style, and timing of deformation demonstrate heterogeneous extension in the Kane Wash area. Only minor extension and tilting persisted post-middle Miocene (<12 Ma). All major eruptive sources overlap domains of rapid extension. Most of the eruptive volumes from the two oldest calderas of the complex apparently pooled within their calderas, creating outflow deficits. Denudation faulting associated with magmatic tumescence may have followed preexisting active extensional fault systems to unload magma chambers, thus triggering eruptions into structural depressions. Evolution of alkaline magmas is demonstrated by progressive increases in peralkalinity and high field strength elements such as Zr, Y, and Nb. Nd, Pb, and Sr isotopic compositions provide evidence that significantly less crustal interaction affected middle Miocene peralkaline magmas than pre-middle Miocene calcalkaline magmas. ε Nd values are −5 to −7 for peralkaline magmas and −7 to −11 for calcalkaline magmas; 208 Pb/ 204 Pb ratios are 38.2–38.6 for peralkaline magmas and 38.5–38.9 for calcalkaline magmas. Regional cooling, short duration of magmatism, small volumes of magma, and local extension caused less crustal interaction in peralkaline Kane Wash magmas than in earlier magmas. North of the Kane Wash area, older more voluminous calcalkaline magmas intruded hotter crust for a longer period and thus interacted with the crust to a greater degree in spite of synvolcanic extension.

Journal of Geophysical Research↗
USGS2012

Surface seismic and electrical methods to detect fluids related to faulting

In the absence of drilling, surface-based geophysical methods are necessary to observe fault zones and fault zone physical properties at seismogenic depths. These in situ physical properties can then be used to infer the presence and distribution of fluids along faults, although such observations are by nature indirect and become less exact with greater depth. Multiple observations of a range of such geophysical properties as compressional and shear seismic velocity ( V p and V s ), V p /V5 ratio (related to Poisson's ratio), resistivity and attenuation in and adjacent to fault zones offer the greatest hope of making inferences of the fault zone geometry, fluids in the fault zone, and fluid reservoirs in the surrounding crust. For simple geometries, fault zone guided waves can provide information on fault zone width and velocities for faults of the order of 200 m wide. To address the question of whether a narrow fault zone can be imaged well enough at depths of seismic rupture to infer the presence of anomalously high fluid/rock ratios, we present synthetic seismic tomography and magnetotelluric examples for an ideal case of a narrow fault zone with a simple geometry, large changes in material properties, and numerous earthquakes within the fault zone. A synthetic 0.5-km wide fault zone with 20% velocity reduction is well imaged using local earthquake tomography. When sequential velocity inversions are done, the true fault width is found, even to 9 km depth, although the calculated amplitude of the velocity reduction is lower than the actual amplitude. V p / V s is as well determined as V p . Magnetotelluric imaging of a synthetic fault zone shows that a conductive fault zone can be well imaged within the upper 10 km. Further, a narrow (1 km) very low resistivity (3 ohm m) fault core can be imaged within a broad (5 km) low resistivity (10 ohm m) fault zone, illustrating that regions of a fault containing large quantities of interconnected fluids within a broader, conductive fault zone should be detectable. Thus variations in fluid content and fluid pressure can be inferred from electrical and seismic methods but there will always be uncertainty in these inferences due to the trade-off with other factors, such as intrinsic variations in porosity, mineralogy, and pore geometry. The best approach is combined modeling of varied seismic and electrical data.

Journal of Geophysical Research Solid Earth↗
USGS2012

The 40Ar/39Ar ages and tectonic setting of the Middle Eocene northeast Nevada volcanic field

Widespread middle to late Eocene calc-alkalic volcanism, which formed the Northeast Nevada Volcanic Field, marks the earliest Tertiary volcanism in the northern Basin and Range. The central part of this major field in northeast Nevada and adjacent Utah is herein defined by 23 40 Ar/ 39 Ar ages that range from 42.6 to 39.0 Ma, rock chemistry from 12 localities, stratigraphic position of the volcanic rocks above a regional middle Eocene unconformity, volcanic setting, and lithology. The type area is at Nanny Creek, in the northern Pequop Mountains, Nevada, where rhyolite ash flow tuffs are overlain by a thick section of intercalated andesitic to dacitic flows and flow breccias and rhyolite ash flow tuffs. The intermediate composition rocks are locally derived throughout the volcanic field, whereas the sources for rhyolite ash flow tuffs are unknown. The uniform and widespread occurrence of the andesitic and dacitic flows and flow breccias strongly suggests that the upper crust was perforated by intermediate composition magma across the entire region. In the central part of the field the middle Eocene volcanic rocks rest with depositional angular discordance on deformed middle Paleozoic to Triassic strata; ostracode-bearing limestone, probably of early Eocene age, is locally present below the volcanic rocks. In the western and southeastern parts of the field these middle Eocene volcanic rocks rest with depositional angular discordance on lower Eocene lacustrine strata of the Elko and White Sage Formations, respectively. This angular discordance documents a middle Eocene deformational event previously unrecognized in the region.

Journal of Geophysical Research↗
USGS2012

Analysis of ERS 1 synthetic aperture radar data of frozen lakes in northern Montana and implications for climate studies

Lakes that freeze each winter are good indicators of regional climate change if key parameters, such as freeze-up and breakup date and maximum ice thickness, are measured over a decade-scale time frame. Synthetic aperture radar (SAR) satellite data have proven to be especially useful for measurement of climatologically significant parameters characteristic of frozen lakes. In this paper, five lakes in Glacier National Park, Montana, have been studied both in the field and using Earth Remote-Sensing Satellite (ERS) 1 SAR data during the 1992-1993 winter. The lakes are characterized by clear ice, sometimes with tubular or rounded bubbles, and often with a layer of snow ice on top of the clear ice. They are also often snow covered. Freeze-up is detected quite easily using ERS 1 SAR data as soon as a thin layer of ice forms. The effect of snow ice on the backscatter is thought to be significant but is, as yet, undetermined. On the five lakes studied, relative backscatter was found to increase with ice thickness until a maximum was reached in February. Breakup, an often ill-defined occurrence, is difficult to detect because surface water causes the SAR signal to be absorbed, thus masking the ice below. Comparison of the bubble structure of thaw lakes in northern Alaska with lakes in northern Montana has shown that the ice structure is quite different, and this difference may contribute to differential SAR signature evolution in the lakes of the two areas.

Journal of Geophysical Research↗
USGS2012

The M2 tide on the Amazon Shelf

As part of A Multidisciplinary Amazon Shelf Sediment Study (AMASSEDS), moored and shipboard current measurements made over the Amazon shelf during 1990–1991 have been analyzed to determine the dominant semidiurnal tidal constituent, the M 2 . These results have been combined with coastal sea level data from within the Amazon and Para Rivers, the adjacent shelf, and with satellite‐derived tidal elevation data from off the shelf to provide a more complete description of the M 2 tide in this complex river/shelf system. Near the Amazon River mouth the M 2 tide propagates across the shelf and through the mouth as a damped progressive wave, with its amplitude decreasing and phase increasing upriver. Over the adjacent shelf north of Cabo Norte, the M 2 tide approaches a damped standing wave, with large amplitudes (greater than 1.5 m) near the coast due to near resonance within the coastal embayment formed by the Cabo Norte shoal to the south and Cabo Cassipore to the north. The observed M 2 tidal currents are nearly rectilinear and oriented primarily across the local isobaths. Comparisons between tidal observations in both the North Channel and the Cabo Norte‐Cabo Cassipore embayment and a simple variable‐width channel tidal model indicate that (1) most of the M 2 tidal energy dissipation occurs over the mid‐ and inner shelf (in water depths less than 20 m) and (2) fluid muds found there cause a significant reduction (of order 50%) in the effective bottom friction felt by the M 2 tide. The approximate resonant period of the Cabo Norte‐Cabo Cassipore embayment is 11.9 hours, and at resonance the average energy dissipation per forcing period is roughly 2.2 times the average mechanical energy in the embayment. This damping rate is large enough that the tidal amplification is rather insensitive to forcing frequency, so that the response of the embayment to forcing over the semidiurnal band should be essentially the same. The vertical structure of the M 2 tidal current is examined at one outer shelf site located in 65‐m water depth. The observed semimajor axis increases logarithmically with height above bottom within the lowest 1–2 m and reaches a maximum in excess of 0.5 m/s at approximately 11 m above bottom. The mean ellipticity is small (less than 0.1) and positive, indicating clockwise rotation of a nearly rectilinear current, and the semimajor axis is oriented within 10° of the local cross‐isobath direction. The M 2 phase increases with height above bottom, with flood at the bottom leading flood at the surface by about 1 hour. A simple, local homogeneous tidal model with time‐ and space‐dependent eddy viscosity simulates the observed near‐bottom velocity reasonably well, however, the model suggests that stratification above the lowest few meters may significantly affect the tidal boundary layer structure at this site. The M 2 energy flux onto the Amazon shelf and into the Amazon and Para Rivers has been estimated using current and surface elevation data and the best fit variable‐width channel model results. The net M 2 energy flux into the mouths of the Amazon and Para Rivers is 0.47×10 10 W and 0.19×10 10 W, respectively. A net M 2 energy flux of about 3.3×10 10 W occurs onto the shelf between the North Channel of the Amazon River and Cabo Cassipore. This stretch of the Amazon shelf accounts for about 1.3% of the global dissipation of the M 2 tide.

Journal of Geophysical Research C: Oceans↗
USGS2012

Dust deposition in southern Nevada and California, 1984–1989: Relations to climate, source area, and source lithology

Dust samples collected annually for 5 years from 55 sites in southern Nevada and California provide the first regional source of information on modern rates of dust deposition, grain size, and mineralogical and chemical composition relative to climate and to type and lithology of dust source. The average silt and clay flux (rate of deposition) in southern Nevada and southeastern California ranges from 4.3 to 15.7 g/m 2 /yr, but in southwestern California the average silt and clay flux is as high as 30 g/m 2 /yr. The climatic factors that affect dust flux interact with each other and with the factors of source type (playas versus alluvium), source lithology, geographic area, and human disturbance. Average dust flux increases with mean annual temperature but is not correlated to decreases in mean annual precipitation because the regional winds bring dust to relatively wet areas. In contrast, annual dust flux mostly reflects changes in annual precipitation (relative drought) rather than temperature. Although playa and alluvial sources produce about the same amount of dust per unit area, the total volume of dust from the more extensive alluvial sources is much larger. In addition, playa and alluvial sources respond differently to annual changes in precipitation. Most playas produce dust that is richer in soluble salts and carbonate than that from alluvial sources (except carbonate‐rich alluvium). Gypsum dust may be produced by the interaction of carbonate dust and anthropogenic or marine sulfates. The dust flux in an arid urbanizing area may be as much as twice that before disturbance but decreases when construction stops. The mineralogic and major‐oxide composition of the dust samples indicates that sand and some silt is locally derived and deposited, whereas clay and some silt from different sources can be far‐traveled. Dust deposited in the Transverse Ranges of California by the Santa Ana winds appears to be mainly derived from sources to the north and east.

California, Nevada↗
USGS2012

Gravity survey of the Mount Toondina impact structure, South Australia

Gravity and seismic reflection data, together with geologic mapping, indicate that the Mount Toondina feature in South Australia is best interpreted as an eroded 4-km-diameter impact structure consisting of a ring structural depression surrounding a pronounced central uplift. Beds at the center of the structure within the central uplift have been raised as much as 200 m from depth and deformed by convergent flow. Seismic reflection data indicate that deformation extends to depths of only ≈800 m; at greater depths the reflectors are nearly flat lying, indicating little or no deformation. Gravity data show residual anomalies of +1.0 mGal coincident with the central uplift and a −0.5 Mgal low associated with the ring structural depression. Modeling of the gravity data indicates that relatively high-density material occurs within the central uplift, whereas the ring depression is filled with low-density material. The deformation at Mount Toondina is typical of a complex impact crater; the 4-km diameter is consistent with the expected threshold size for complex craters formed in weak to moderate strength sedimentary rocks.

South Australia↗
USGS2012

Hydrous carbonates on Mars?: Evidence from Mariner 6/7 infrared spectrometer and ground‐based telescopic spectra

Absorption features at 2.28 and 5.4 μm identified in Mariner 6/7 infrared spectrometer and terrestrial telescopic spectra are consistent with the spectra of hydrous magnesium carbonates such as hydromagnesite and artinite. Spectral characteristics of these hydrous carbonates are different from those of the anhydrous carbonates, as the former do not have the strong spectral features typically associated with anhydrous carbonates such as calcite and siderite. Theoretical mixing indicates that, depending on the type of hydrous carbonate, 10–20 wt % can be incorporated into the regolith without contradicting the spectral observations or the Viking x ray fluorescence chemical analysis. Hydrous carbonates form as weathering products of mafic minerals in the presence of H 2 O and CO 2 , even in the Antarctic. Their formation as evaporite minerals from either original magmas or hydrothermally altered rocks is consistent with the Martian environment, provided liquid water is or has been at least transiently present. On Earth, formation of hydrous Mg carbonates is associated with the production of amorphous iron oxides, which is consistent with both the environment and the inferred surface mineralogy of Mars. These minerals are about 60 wt % H 2 O, CO 3 , and OH; if they are abundant everywhere at the 10% level, then about 6% of the surface weight could be volatiles bound in this type of mineral. Although the stability of hydrous carbonates in a Martian environment is uncertain, there may be kinetic factors inhibiting the dehydration of these minerals, which may persist metastably in the current environment. Although the spectroscopic evidence for anhydrous carbonates is scant, the possible presence of hydrous carbonates provides an appealing mechanism for the existence of carbonates on Mars.

Journal of Geophysical Research↗
USGS2012

Venus cartography

The entire surface of the planet Venus is being mapped at global and regional scales (1:50,000,000 through 1:1,500,000) with synthetic aperture radar (SAR), radar altimeter, and radiometer measurements of physical properties from the Magellan spacecraft. The mapping includes SAR image mosaics, shaded relief maps, and topographic contour overlays made from altimetry data and by radargrammetric methods. Methods used include new techniques of radar image processing that became operational as a result of the Magellan mission. The area being mapped (at a resolution of 75 m/pixel) is roughly equivalent to that of Earth, including seafloors. The mapping is designed to support geologic and geophysical investigations.

Journal of Geophysical Research E: Planets↗
USGS2012

Superposed local and regional paleostresses: fault-slip analysis of Neogene extensional faulting near coeval caldera complexes, Yucca Flat, Nevada

Numerous reduced stress tensors are computed by multiple inversions of 906 temporally and spatially partitioned fault-slip data from the Yucca Flat region in the southwest Nevada volcanic field to constrain the Neogene paleostress and faulting history and to investigate how the regional tectonic stress field was affected by local caldera magmatism. Perturbed, shallow (<400 m), pre-11 Ma paleostress configurations, determined west and northwest of present (post-11 Ma) Yucca Flat basin, existed during mild extensional faulting and are attributed to superposition of transient caldera-magmatic stresses on the regional stress field. Northwest of Yucca Flat a progressive shift in least principal stress (σ 3 ) directions near known calderas located 5–15 km to the west occurred under a normal-slip stress state during caldera development between about 15 and 13 Ma. A brief (∼0.5 m.y.) change to a strike-slip stress state occurred at about 13 Ma and was accompanied by small-offset, quasi-conjugate strike-slip faulting. This stress state was most distinct, relative to a normal-slip state, near calderas where stress solutions and fault relations indicate closer affinities to a reverse-slip state. Inferred 11.6–11.45 Ma paleostress tensors indicate radial tension associated with either initial caldera collapse or local post-collapse topographic modification of the stress field. Post-11 Ma normal-slip stress tensors are associated with normal- and oblique-slip faults that accommodated subsidence and eastward extension of Yucca Flat basin away from the caldera complexes. These tensors do not indicate stress modifications due to residual caldera-related effects and thus were used to infer post-11 Ma regional stress changes. The stress field has rotated as much as 65° clockwise since 11 Ma during extensional development of Yucca Flat basin, with most of the rotation and extension occurring before about 8.5 Ma. Results suggest that shallow magmatism and caldera development can strongly alter extensional tectonic stress fields, fault patterns, and slip directions in the uppermost crust out to distances of roughly two magma chamber radii away from a magma body.

Journal of Geophysical Research↗
USGS2012

Interseismic uplift at the Nankai subduction zone, southwest Japan, 1951–1990

Uplift as a function of time from 1951 through 1990 has been deduced from annual mean sea level measured at 15 tide gages along the Nankai subduction zone, southwest Japan. The recurrence interval for rupture of the Nankai subduction zone is about 100 years, and the most recent rupture was in late 1946. Thus the 1951–1990 uplift record covers most of the first half of the earthquake cycle. The precision of the uplift record is better than could be obtained currently by annual Global Positioning System (GPS) measurements. The pre‐1960 uplift record shows rapid deformation that appears to terminate in 1959. After 1959 the uplift record is remarkably linear in time: Significant curvature in the uplift‐versus‐time plots is detected at only three of the 15 tide gages. The inferred uplift rates are not quantitatively consistent with the predictions of either the viscoelastic coupling or elastic half‐space models of subduction, but the agreement is sufficient to suggest that the causative physical mechanisms have been identified. The immediate postseismic response is controlled by the propagation of slip downward along the downdip extension of the coseismic rupture, and the interseismic response is caused by the accumulation of a slip deficit on the main thrust zone. Asthenosphere relaxation is not required to explain the observations.

Journal of Geophysical Research B: Solid Earth↗