Search USGSSearch

SEARCH · Search USGS

Results for “Techniques and Methods”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68Linked to original sources

Advances in ice radar studies of a temperate alpine glacier, South Cascade Glacier, Washington, U.S.A.

South Cascade Glacier, Washington, U.S.A., is one of the most extensively studied glaciers in the Western Hemisphere. In addition to mass-balance measurements, which date to 1958, numerous hydrological investigations have been carried out during the last three decades, and repeated ice-thickness determinations have been made using a variety of techniques. In the late 1960s, the basal topography was initially determined by gravitimetric methods. In the mid-1970s some of the first depth measurements using radar on temperate ice were made. The basal topography was remapped soon after from a series of point radar measurements and boreholes drilled to the glacier bottom. During the 1990s, the ice thickness was remapped using digital recording of continuous profiles that obtained over 5000 ice-thickness measurements. Profiles have been corrected for the finite beamwidth of the antenna radiation pattern and reflections in steep terrain, resulting in a significantly improved depiction of the basal surface and internal structures. The map based on our recent radar profiles confirms the large-scale features of the basal topography previously depicted and reveals more structural detail. A bright reflector was detected at the base of the glacier and could be traced in adjacent profiles. Comparison with results from water-level measurements in boreholes drilled to the bed indicates that the reflector is a subglacial conduit.

Washington

Tracking tracer breakthrough in the hyporheic zone using time‐lapse DC resistivity, Crabby Creek, Pennsylvania

Characterization of the hyporheic zone is of critical importance for understanding stream ecology, contaminant transport, and groundwater‐surface water interaction. A salt water tracer test was used to probe the hyporheic zone of a recently re‐engineered portion of Crabby Creek, a stream located near Philadelphia, PA. The tracer solution was tracked through a 13.5 meter segment of the stream using both a network of 25 wells sampled every 5–15 minutes and time‐lapse electrical resistivity tomographs collected every 11 minutes for six hours, with additional tomographs collected every 100 minutes for an additional 16 hours. The comparison of tracer monitoring methods is of keen interest because tracer tests are one of the few techniques available for characterizing this dynamic zone, and logistically it is far easier to collect resistivity tomographs than to install and monitor a dense network of wells. Our results show that resistivity monitoring captured the essential shape of the breakthrough curve and may indicate portions of the stream where the tracer lingered in the hyporheic zone. Time‐lapse resistivity measurements, however, represent time averages over the period required to collect a tomographic data set, and spatial averages over a volume larger than captured by a well sample. Smoothing by the resistivity data inversion algorithm further blurs the resulting tomograph; consequently resistivity monitoring underestimates the degree of fine‐scale heterogeneity in the hyporheic zone.

Pennsylvania

Evaluation of three miniature radio transmitter attachment methods for small passerines

Thirty-two immature common yellowthroats were used to evaluate three methods of attaching radio transmitters to the backs of small passerines: adhesive, velcro, and harness. There were no significant differences between the three methods; however, the adhesive method of transmitter attachment to small birds was found to be the preferred technique.

Wildlife Society Bulletin

Captive and field-tested radio attachments for bald eagles

The effects of two radio transmitter attachment techniques on captive and one attachment technique on wild Bald Eagles (Haliaeetus leucocephalus) were studied. A Y-attachment method with a 160-g dummy transmitter was less apt to cause tissue damage on captive birds than an X-attachment method, and loosely fit transmitters caused less damage than tightly fit transmitters Annual survival of wild birds fitted with 65-g transmitters via an X attachment was estimated at 90-95%. As a result of high survival, only five wild birds marked as nestlings were recovered.Two of these birds had superficial pressure sores from tight-fitting harnesses It is recommended that a 1.3-cm space be left between the transmitter and the bird's b ack when radio-tagging post-fiedging Bald Eagles. Additional space, perhaps up to 2.5 cm, is required for nestlings to allow for added growth and development.

Journal of Field Ornithology

Procedures for the use of aircraft in wildlife biotelemetry studies

This is a report on the state of the art methodology and on questions that arise while one is preparing to use aircraft in a biotelemetry study. In general the first step in preparing to mount an antenna on an aircraft is to consult with a certified aircraft mechanic. Aircraft certification is discussed to provide background information concerning the role of the Federal Aviation Administration (FAA) in regulating the use of biotelemetry antennas on aircraft. However, approval of any specific design of antenna mount rests with local FAA authority. Airplane and helicopter antenna attachments are described. Performance of the receiving antenna system is discussed with emphasis on how variables as aircraft type and antenna configuration may influence reception. The side-looking vs. front-looking antenna configuration and the VHF vs. HF frequency band are generally recommended for most aerial tracking studies. Characteristics of receivers, transmitters, and antennas that might influence tracking are discussed. Specific topics such as calibration of receivers and transmitter quality control are considered. Suggestions in preparing for and conducting tracking flights that will improve overall efficiency and safety are presented. Search techniques, including procedures for conducting large and specific area surveys as well as methods to improve and evaluate search efficiency, are discussed. A concluding section considers special topics such as low-level operations and the use of helicopters. Diagrams of antenna mounts, equipment check-off lists, and antenna test procedures are included as appendices.

Resource Publication

Hydrologic effects of highway-deicing chemicals in Massachusetts

Methods of estimating annual mean and annual maximum chloride concentrations and sodium concentrations in streams were developed using multiple and simple linear regression techniques and data collected during the 1972-77 water years. Independent variables are easily obtainable parameters such as total salt application within a basin, annual precipitation, and drainage basin characteristics. Methods for obtaining gross estimates of chloride loads and sodium loads from salt-application data and estimates of nonhighway-related chloride and sodium were suggested. A chloride budget was calculated for a small drainage basin containing a section of interstate highway. The chloride budget was described in terms of the percentages in direct runoff to the stream, in ground-water discharges to the stream, in storage in the ground, and in the amount unaccounted for. Attempts were made to relate chloride concentrations in ground water adjacent to highways to quantities of salt applied to the highways on an annual basis, annual precipitation, depth of the wells below land surface, depth of wells below the water table, and distance of well from edge of pavement. Little correlation was observed between annual salt-application values and annual mean chloride concentrations in ground water near highways. The irregular distribution of highway runoff, due to topographic differences between sites, and variations in salting and runoff during individual storm events seem to affect correlation between quantities of salt applied and chloride concentrations in ground water near highways. (USGS)

Open-File Report

Computer technique for slope-area measurements

The report gives detailed instructions on preparation of input data for automatic computation of a discharge measurement by the slope-area method. The program follows standardized methods of computing cross section properties and uses multi-section discharge equations. The printout comprises hydraulic properties of each section and computed discharges for each component sub-reach and for the entire reach. One example demonstrates the technique.

Surface Water Techniques

An evaluation of installation methods for STS-1 seismometers

This report documents the results of a series of experiments conducted by the authors at the Albuquerque Seismological Laboratory (ASl) during the spring and summer of 1991; the object of these experiments was to obtain and document quantitative performance comparisons of three methods of installing STS-1 seismometers. Historically, ASL has installed STS-1 sensors by cementing their thick glass base plates to the concrete floor of the vault (see Peterson and Tilgner, 1985, p 44 and Figure 31, p 51 for the details of this installation technique). This installation technique proved to be fairly satisfactory for the China Digital Seismic Network and for several sets of STS-1 sensors installed in other locations since that time. However, the cementing operation is rather labor intensive and the concrete requires a lengthy (about 1 week) curing time during which the sensor installed on it is noisy. In addition it is difficult to assure that all air bubbles have been removed from the interface between the cement and the glass base plate. If air bubbles are present beneath the plate, horizontal sensors can be unacceptably noisy. Moving a sensor installed in this manner requires the purchase of a new glass base plate because the old plate normally can not be removed without breakage. Therefore, this study was undertaken with the aim of developing an improved method of installing STS-1's. The goals were to develop a method which requires less field site labor during the installation and assures a higher quality installation when finished. In addition, the improved installation technique should promote portability. Two alternate installation techniques were evaluated in this study. One method replaces the cement between the base plate and the vault floor with sand. This method has been used in the French Geoscope program and in several IRIS/IDA installations made by the University of California at San Diego (UCSD) and possibly others. It is easily implemented in the field and is quite cheap. The other method utilizes a so called warpless housing designed by E. Wielandt and implemented at ASL. This housing is quite similar to the case design of the STS-2 sensor system. It is designed to minimize the effects of atmospheric pressure variations on the sealed housing.

Open-File Report

Techniques for estimating sediment yield of ungaged tributaries on the southern Colorado Plateau

Numerous regional sediment transport data are used to evaluate three techniques for estimating streamflow sediment yield from ungaged tributaries of the Colorado River in Grand Canyon. These techniques include: (1) a regression equation relating drainage area to sediment yield for all relevant sediment-yield data from northern Arizona, (2) an empirical relation developed by Renard (1972) selected from 8 potentially relevant methods, and (3) a new procedure that combines regional flood-frequency analysis with sediment-rating curves. Results based on techniques (1) and (2) are not significantly different. The third technique requires numerous assumptions, most notably that sediment yield on a decadal average can be described by several floods of recurrence intervals of 2 yr, 5 yr, and 10 yr described by regional flood-frequency relations. Using data collected at gaging stations, we develop a relation between peak discharge and total-event sediment yield derived from hydrographs and sediment-rating curves. This third technique produces sediment yield estimates comparable to those of the regional data regression and Renard (1972) relations and may be a more robust technique for estimating sediment yield when streamflow data are available.

Arizona

Analog-model analysis of regional three-dimensional flow in the ground-water reservoir of Long Island, New York

A three-dimensional analog model of the ground-water system beneath Long Island, N.Y., provides a practical means for studying anisotropic flow on a regional scale. Constructional and operational techniques influence the simulation almost as much as model design does. Usefulness and accuracy of the model depend on (1) inherent and practical limitations of the finite-difference method, (2) accuracy and completeness of the data base, and (3) accuracy of the assumptions and approximations that were made in applying the simulation technique to this particular ground-water reservoir. Reliable data used in design of the model are (1) horizontal hydraulic conductivity and thickness of three major aquifers, (2) extent of confining beds, (3) specific yield, and (4) locations of streams. Estimates of vertical hydraulic conductivity and specific storage were applied to the model. Most spatially fixed model boundaries are good representations of prototype (real-world) boundaries. Most dynamic boundaries are only approximately represented, and some dynamic boundaries require application of unproved assumptions. The simulated ground-water reservoir generally agrees with prototype hydrology, and the model is being used for predictive studies. (Woodard-USGS)

Professional Paper

Traveltime and reaeration characteristics for a reach of the Rio Grande, Albuquerque, New Mexico, October 1991

Traveltime characteristics were determined using stream-velocity data and tracer-dye data for a reach of the Rio Grande. Traveltimes determined by the stream-velocity method were virtually the same as those determined by the tracer-dye and tracer-gas technique. The mean velocity of the stream was 1.12 miles per hour at a flow of about 300 cubic feet per second. Reaeration characteristics were determined using a propane tracer gas and a tracer-dye (rhodamine WT). Reaeration coefficients were adjusted for water temperature and the effects of wind movement on the water surface. The peak method-adjusted reaeration-coefficient mean value for the reach was 7.0 per day and ranged from 4.6 to 8.3 per day. The area method-adjusted reaeration- coefficient mean value for the reach was 7.7 per day and ranged from 5.5 to 10.4 per day.

Water-Resources Investigations Report

Estimating numbers of greater prairie-chickens using mark-resight techniques

Current monitoring efforts for greater prairie-chicken (Tympanuchus cupido pinnatus) populations indicate that populations are declining across their range. Monitoring the population status of greater prairie-chickens is based on traditional lek surveys (TLS) that provide an index without considering detectability. Estimators, such as immigration-emigration joint maximum-likelihood estimator from a hypergeometric distribution (IEJHE), can account for detectability and provide reliable population estimates based on resightings. We evaluated the use of mark-resight methods using radiotelemetry to estimate population size and density of greater prairie-chickens on 2 sites at a tallgrass prairie in the Flint Hills of Kansas, USA. We used average distances traveled from lek of capture to estimate density. Population estimates and confidence intervals at the 2 sites were 54 (CI 50-59) on 52.9 km 2 and 87 (CI 82-94) on 73.6 km2. The TLS performed at the same sites resulted in population ranges of 7-34 and 36-63 and always produced a lower population index than the mark-resight population estimate with a larger range. Mark-resight simulations with varying male:female ratios of marks indicated that this ratio was important in designing a population study on prairie-chickens. Confidence intervals for estimates when no marks were placed on females at the 2 sites (CI 46-50, 76-84) did not overlap confidence intervals when 40% of marks were placed on females (CI 54-64, 91-109). Population estimates derived using this mark-resight technique were apparently more accurate than traditional methods and would be more effective in detecting changes in prairie-chicken populations. Our technique could improve prairie-chicken management by providing wildlife biologists and land managers with a tool to estimate the population size and trends of lekking bird species, such as greater prairie-chickens.

Journal of Wildlife Management

Leveraging angler effort to inform fisheries management: Using harvest and harvest rate to estimate abundance of White Sturgeon

Traditional methods for estimating abundance of fish populations are not feasible in some systems due to complex population structure and constraints on sampling effort. Lincoln’s estimator provides a technique that uses harvest and harvest rate to estimate abundance. Using angler catch data allows assumptions of the estimator to be addressed without relying on methods that could be prohibitively field-intensive or costly. Historic estimates of White Sturgeon Acipenser transmontanus abundance in the Sacramento–San Joaquin River basin have been obtained using mark–recapture methods; however, White Sturgeon population characteristics often cause violations of model assumptions, such as population closure and independent capture probabilities. We developed a version of Lincoln’s estimator using a joint likelihood, estimated abundance of White Sturgeon in the Sacramento–San Joaquin River basin in 2015 using this method and empirical data and assessed accuracy and precision of estimates in a simulation study. Estimating abundance using harvest and harvest rate, as represented by our model framework, has the potential to be precise and accurate. The joint likelihood–based approach fitted using Bayesian methods is advantageous because it includes all sources of variation in a single model. Precision of abundance estimates was low with application of the model to White Sturgeon in the Sacramento–San Joaquin River basin and to similar conditions in a simulated dataset. Using simulation, precision and accuracy increased with increases in the number of high-reward and standard tags released, tag reporting rate, tag retention rate, and harvest rate. Results demonstrate potential sources of error when using this approach and suggest that increasing the number of tagged fish and tag reporting rate are potential actions to improve precision and accuracy of abundance estimates of the model.

California

Speciation of aryloxyethoxyethyl benzyl dimethyl ammonium salts by glass capillary gas chromatography and high-performance liquid chromatography

Using glass capillary gas chromatography (GC) and ion-pair reversed-phase high-performance liquid chromatography (HPLC), a pair of structurally similar microbicides, benzyl diisobutylphenoxyethoxyethyl dimethyl ammonium chloride and its cresoxy-analogue, were effectively resolved and accurately quantified with a high degree of selectivity and specificity. Optimization of conditions in the chromatographic systems to attain desirable baseline separations of the components of interest is described. The minimum detectable quantities as determined are in the neighborhood of 10 ng for the quaternary ammonium salts by HPLC-UV detection, 0.1 ng for the cyanamide derivatives of the salts by GC-alkaline flame-ionization detection and 1–2 pg for the trichloroethyl carbamate derivatives of the salts by GC-electron-capture detection. In conjunction with cation-exchange chromatography for sample enrichment and purification, the glass capillary GC and ion-pair reversed-phase HPLC methods presented here are particularly suitable to separate and simultaneously analyze for the aryloxyethoxyethyl benzyl dimethyl ammonium compounds concerned in environmental samples. It appears that these chromatographic techniques possess potential applicability to the separation and quantification of other classes of quaternary ammonium compounds with closely related structures that are not separable by other methods.

Journal of Chromatography

A technique for estimating flood heights on small streams in the city of Charlotte and Mecklenburg County, North Carolina

A method for estimating the height reached by floods having recurrence intervals of 10, 20, and 100 years is defined for unregulated streams in Charlotte and Mecklenburg County draining areas of less than 1.0 square mile. Flood heights, defined as the vertical distance between the streambed at riffles and the floodwater surface, can be used to estimate flood elevations on small streams where flood profiles and flood inundation maps are not available. An illustrative example is given of how the method can be used with streambed elevation data and topographic maps to estimate flood elevations and delineate inundated areas.

North Carolina

Correlations of turbidity to suspended-sediment concentration in the Toutle River Basin, near Mount St. Helens, Washington, 2010-11

Researchers at the U.S. Geological Survey, Cascades Volcano Observatory, investigated alternative methods for the traditional sample-based sediment record procedure in determining suspended-sediment concentration (SSC) and discharge. One such sediment-surrogate technique was developed using turbidity and discharge to estimate SSC for two gaging stations in the Toutle River Basin near Mount St. Helens, Washington. To provide context for the study, methods for collecting sediment data and monitoring turbidity are discussed. Statistical methods used include the development of ordinary least squares regression models for each gaging station. Issues of time-related autocorrelation also are evaluated. Addition of lagged explanatory variables was used to account for autocorrelation in the turbidity, discharge, and SSC data. Final regression model equations and plots are presented for the two gaging stations. The regression models support near-real-time estimates of SSC and improved suspended-sediment discharge records by incorporating continuous instream turbidity. Future use of such models may potentially lower the costs of sediment monitoring by reducing time it takes to collect and process samples and to derive a sediment-discharge record.

Washington

Validation of stable isotope ratio analysis to document the biodegradation and natural attenuation of RDX, ESTCP Project ER-201208

Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) is a common soil contaminant at current and former military facilities, including many training and testing ranges. Because RDX is readily transported through soils to the subsurface, this nitramine explosive now also impacts groundwater and drinking water at numerous locations across the country. A significant issue with RDX contamination on ranges and at other military installations is that it often occurs over expansive areas, where in situ or ex situ treatment technologies are difficult to implement. One potential alternative for military ranges and other facilities is monitored natural attenuation (MNA), in which contaminant degradation by natural processes, including biodegradation, are evaluated. However, one limitation of this approach for RDX is the inability to accurately evaluate whether the nitramine is biodegrading under field conditions, as rates may be relatively slow. One potential technique to overcome this limitation is the use of compound-specific stable isotope analysis (CSIA), where biological contaminant destruction can be documented as changes in the ratio of stable isotopes of specific elements in a molecule; for RDX, ratios of 15 N/ 14 N and 13 C/ 12 C are relevant. The objective of this project is to validate a CSIA method to confirm and constrain rates of aerobic and anaerobic biodegradation of RDX at field sites. This technique can be utilized by DoD to provide critical data to support MNA as a remedy for treating this energetic in groundwater, and confirm the effectiveness of in situ enhanced bioremediation remedies. The stable isotopic composition of NO 3 - and NO 2 - was also measured when these anions co-occurred with RDX to evaluate whether these potential degradation products from RDX could be used to further demonstrate MNA in the field.

Report